FCC ID: 2AB2QA20BR3065T20M1 LED LAMP

LEEDARSON BR30 A20BR3065T20M01, input 120Vac, frequency was 60Hz,through dimmer or toggle switch to choose the CCT what you want. Product features:

Controlled by microwave 5.8 G to realize the Motion Detection. Product Name LED Lamp Brand Name LEEDARSON Model No. A20BR3065T20M01 Working Voltage 120Vac Input Wattage 8.8W Work Temperature

-20-45 Microwave Frequency 5.8 G75MHz FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation. This equipment, if not installed andused in accordance with the instructions, may cause harmful interference to radio communications. Anychanges or modifications not expressly approved by the manufacturer could void the user's authority tooperate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions, may causeharmful interference to radio communications. However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off and on, the user is encouraged to try tocorrect the interference by one or more of the following measures: reorient or relocate the receiving antenna;increase the separation between the equipment and receiver; connect the equipment into an outlet on acircuit different from that to which the receiver is connected;

consult the dealer or an experienced radio/TVtechnician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. Thisequipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Regulatory Label and Location Model #: A20BR3065T20M01 FCC ID: 2AB2QA20BR3065T20M1 Made in China

Regulatory Label and Location Model #: A20BR3065T20M01 FCC ID: 2AB2QA20BR3065T20M1 Made in China

LEEDARSON LIGHTING CO., LTD. Xingda Road, Xingtai Industrial Zone, Changtai County, Zhangzhou, Fujian, China Agent Authorization Company: LEEDARSON LIGHTING CO., LTD. Address: Xingda Road, Xingtai Industrial Zone, Changtai County, Zhangzhou, Fujian, China Product Name: LED LAMP Model Number(s): A20BR3065T20MXX, 11aDy-BR650ST-Q1TZM-xx (Where

"y" may be "A"-"Z" for different enclosure pattern design; "xx or XX" may be "00" to "99", which designates for different beam angle, color of eyelet contact, package of style, color of enclosure.) Product Description: LED LAMP We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Vick Zhang Title:

safety engineer Company: LEEDARSON LIGHTING CO., LTD. Date: 2022-03-11

LEEDARSON LIGHTING CO., LTD. March 11, 2022 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attn: OET Dept. Ref:

2AB2QA20BR3065T20M1 FCC Class II Permissive change for FCC ID:

Applicant: LEEDARSON LIGHTING CO., LTD. Dear Examiner, This is to request a Class II Permissive change for FCC ID:

2AB2QA20BR3065T20M1 originally granted on 02/23/2021

(date). The change under this application of this device as follows, 1. The driver changed the manufacturer, output parameters and circuit unchanged I attest that the certified device will not be capable of ad-hoc mode operation outside of the grant conditions. Sincerely, Signature:

Name: Vick Zhang Date: 2022-03-11 FCC_Class II PC request letter Rev1.0.docx

LEEDARSON LIGHTING CO., LTD. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2AB2QA20BR3065T20M1 Date: 03-11-2022 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure External Photos Test Setup Photos Internal Photos User Manual Sincerely, Signature:

Name: Vick Zhang Title: safety engineer

LEEDARSON LIGHTING CO., LTD. Date:02/18/2021 To:

Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: Request of Confidentiality for FCC ID: 2AB2QA20BR3065T20M1 To Whom it may concern:

Pursuant to sections 0.457 and 0.459 of Commissions Rules(CFR 47), and Section 552(b)(4) of the Freedom of Information Act, LEEDARSON LIGHTING CO., LTD. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of to the Applicant and provide unjustified benefits to its competitors. these matters might be harmful We are also hereby request Short-Term Confidentiality till date 08/17/2021 as outlined in Public Notice DA04-1705. This provision will give LEEDARSON temporary confidentiality of commercially sensitive LIGHTING CO., LTD. information prior to product release. The requested Permanent and Short-Term Confidential exhibits are listed as follows:

PERMANENT AND SHORT-TERM CONFIDENTIAL LIST PERMANENT SHORT-TERM Exhibit 1 2 3 4 5 6 7 8 Description Block Diagram Operational Description Schematics BOM External Photos Internal Photos Test-Setup Photos User Manual The Applicant understands that pursuant this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Signatory to Rule 0.457, disclosure of NameVick Zhang Company nameLEEDARSON LIGHTING CO., LTD. AddressXingtai Industrial Zone, Economic Development Zone, Changtai County, Zhangzhou city,Fujian Province, P.R.China Tel(86) 592-3699897 Email cert@leedarson.com

FCC ID:2AB2QA20BR3065T20M1 LEEDARSON LIGHTING CO., LTD. Model difference Declaration Letter Date:2021/2/4 Hereby, we, <LEEDARSON LIGHTING CO., LTD.>, declare that for model number: BR-SMADRAaa008Ry-TZM0650W25-**A20BR3065T20MXX, with model number: A20BR3065T20M01 have the same hardware and software, only different for enclosure pattern design, beam angle, color of eyelet contact, package of style, all RF parameters remain the same as before. Please be noticed. Signatory:

Contact name: Vick Zhang Company name: LEEDARSON LIGHTING CO., LTD. Address: Xingtai Industrial Zone, Economic Development Zone, Changtai County, Zhangzhou city, Fujian Province, P.R.China Tel: 0592-3699897 Fax:

Email: cert@leedarson.com

LEEDARSON LIGHTING CO., LTD. Date: 02/18/2021 To:

Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern:

The LEEDARSON LIGHTING CO., LTD., the undersigned, hereby authorizes Mr. Qijie Xiao from Kehu-Morlab Test Laboratory to act on the behalf of the LEEDARSON LIGHTING CO., LTD. solely in matters relating to the application for an FCC equipment authorization for FCC ID: 2AB2QA20BR3065T20M1 including the signing of documents in connection with this Application. Necessary acts carried out Kehu-Morlab Test Laboratory on our behalf of the LEEDARSON LIGHTING CO., LTD. in connection with the Application shall have the same effect as acts of the f LEEDARSON LIGHTING CO., LTD.. LEEDARSON LIGHTING CO., LTD. also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Thank you for your attention to this matter. Yours Sincerely, Signatory:

Contact name: Vick Zhang Title: safety engineer Tel: (86) 592-3699897 Email: cert@leedarson.com Company name: LEEDARSON LIGHTING CO., LTD.