FCC ID: 2AB2Q13ASBA800STQ1T Smart A19 LED Light Bulb, Color Changing

Product Name Brand Name Working Voltage Smart A19 LED Light Bulb, Color Changing LEEDARSON 120Vac FCC Compliance Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF Warning Statement: The device has been evaluated to meet general RF exposure requirements. This device should be installed and operated with minimum distance of 8

(20 cm) between the radiator and your body. Canada IC Notice This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canadas licenceexempt RSS(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment. This Class B digital apparatus complies with Canadian CAN ICES003(B) / NMB003(B) standard. This Class B digital apparatus complies with Canadian CAN ICES005(B) / NMB005(B) standard. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 8 (20 cm) between the radiator and any part of your body.

Regulatory Label and Location Label:

PMM/Model NO. : 13aSB-A800ST-Q1T FCC ID: 2AB2Q13ASBA800STQ1T IC: 10256A-13ASBA800ST Made in China label location:

The label was carved into the product with radium.

LEEDARSON AMERICA INC. Date: 4/14/2023 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 2.911 (d)(7) FCC US Agent Letter of Attestation Grantee Code: 2AB2Q Grantees FRN: 0023443971 To whom it may concern:

FCC US Agent LEEDARSON AMERICA INC. FCC FRN: 0033657479 Agent Contact Name: Joe Chen Agent US Address: 300 Technology CT Suite 100, Smyrna GA. The USA. 30082 Agent Email Address: THD-BIZ@leedarson.com This letter is to confirm that we have accepted the responsibility to act as US Agent on behalf of LEEDARSON LIGHTING CO., LTD. (the applicant) for the above grantee code. We are aware of the requirements and responsibilities of the applicants agent for service of process as outlined in the FCC section 2.911(d)(7) and Report and Order FCC 22-84 paragraph 63. Sincerely, On dat. Authorized Agent Contact Person Name: Joe Chen Agent contact Job Title: General Manager Agent Company name: LEEDARSON AMERICA INC.

LEEDARSON LIGHTING CO., LTD Date: 9/6/2023 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 2.911 (d)(7) Agent Designation Attestation FCC ID: 2AB2Q13ASBA800STQ1T Grantees FRN:0023443971 LEEDARSON LIGHTING CO., LTD (the applicant) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicants agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility under CFR 47 2.929(c) to inform the FCC whenever the agent information changes. U.S. Agent Information:

Contact Person:Joe Chen Company Name:LEEDARSON AMERICA INC. Company Address:300 Technology CT Suite 100, Smyrna GA. The USA.30082 Email: joe@leedarson.com FRN:0033657479 Sincerely yours, Company Name: LEEDARSON LIGHTING CO., LTD Contact Name: Vick Zhang Title of PersonCertification Manager Address: Xingda Road, Xingtai Industrial Zone, Changtai County, Zhangzhou, Fujian, China Date:09/12/2023

LEEDARSON LIGHTING CO., LTD Date: 9/6/2023 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 2.911 (d)(5) Attestation FCC ID: 2AB2Q13ASBA800STQ1T Grantees FRN:0023443971 1. LEEDARSON LIGHTING CO., LTD (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2. LEEDARSON LIGHTING CO., LTD (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Company Name: LEEDARSON LIGHTING CO., LTD Contact Name: Vick Zhang Title of PersonCertification Manager Address: Xingda Road, Xingtai Industrial Zone, Changtai County, Zhangzhou, Fujian, China Date:09/12/2023

LEEDARSON LIGHTING CO., LTD Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject:

Request for Confidentiality FCC ID:

2AB2Q13ASBA800STQ1T To Whom It May Concern:

Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Bom List Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Company Name: LEEDARSON LIGHTING CO., LTD Contact Name: Vick Zhang Title of PersonCertification Manager Address: Xingda Road, Xingtai Industrial Zone, Changtai County, Zhangzhou, Fujian, China Date:09/12/2023

LEEDARSON LIGHTING CO., LTD Address: Xingda Road, Xingtai Industrial Zone, Changtai County, Zhangzhou, Fujian, China Confirmation Letter We, Company name: LEEDARSON LIGHTING CO., LTD The product: Smart A19 LED Light Bulb, Color Changing And model No.: 13aSB-A800ST-Q1T, 13aSB-A800ST-Q1T_#-Pack (Where # may be 2 - 99), B0CG5VDC8P, B0CG5VZ8KT FCC ID: 2AB2Q13ASBA800STQ1T B0CG5VZ8KT,13aSB-A800ST-Q1T_#-Pack (Where # may be 2 - 99) have the same technical construction including circuit diagram, PCB Layout, components and component layout, all electrical construction and mechanical construction with 13aSB-A800ST-

Q1T. The difference lies only model name and package style. B0CG5VDC8P is all the same to 13aSB-A800ST-Q1T expect the model name. all these changes do not degrade the unwanted emissions of the certified product. Company Name: LEEDARSON LIGHTING CO., LTD Contact Name: Vick Zhang Title of PersonCertification Manager Address: Xingda Road, Xingtai Industrial Zone, Changtai County, Zhangzhou, Fujian, China Date:09/12/2023