Instructions 1.Feature:
Bluetooth specification: Bluetooth 4.1 + EDR specification. Battery capacity: 120mAH. Bluetooth protocol: HFP v1.6, HSP v1.2, A2DP v1.3, AVRCP v1.5, SPP v1.2 Audio performance: Support SBC, MP3, AAC, stereo. Bluetooth distance: 10 meters (accessibility). Working time: 4 hours. answer / hang up the phone, call waiting, volume adjustment, up and down the first switch, the music play / pause, power and connected to the voice prompts, maximum / minimum volume of voice prompts, telephone redial, Bluetooth phone home. can simultaneously connect two mobile phones. Caller ID voice reporting power display 2.The operating instructions:
a. Power: Long press the answer key to boot, until you hear a tone switched (voice prompt boot) and the light blue lights flashing. b. Bluetooth pairing: Press answer key to boot, until you hear a tone paired (voice prompts to enter pairing mode) and the indicator light alternately flashes red and blue light, to find the appropriate name Bluetooth devices on your phone, click on the device name on the phone screen Bluetooth pairing After successful pairing, paired hear the tone (voice prompts paired connected), blue indicator light flashes. off: long press the answer button off (the voice prompts shutdown). volume up: Press the volume up button to adjust the volume, volume down: Press volume down button to adjust the volume. a song on switching: short press volume down key on a first switch. next song switch: Short press volume up button to switch to the next header. c. d. Charging: When charging, the indicator red light, blue light after full. e. Charging voltage: 5V f. Charging way: MICRO 5PIN USB port. g. h. i. j. k. music playback: Short press the answer key. l. Music Pause: short press the answer key. m. answer / hang up: press the answer key. n. o. mobile phone connection: first open at two mobile phones, Bluetooth device is phone Redial: Press twice to redial the last call answer key number. turned into pairing mode, two phones at the same time find the appropriate Bluetooth device name, then click on the device name on-screen pairing two phones (voice prompts pairing successfully connected, the second device is connected successfully). 3.FCC STATEMENT 1). This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. 2). Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
(4) Consult the dealer or an experienced radio/TV technician for help. RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.