U-NII Device Declaration Letter Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 Certification and Engineering Bureau Innovation, Science and Economic Development Canada Spectrum Engineering Branch 3701 Carling Avenue, Building 94 Ottawa, Ontario K2H 8S2 TO WHOM IT MAY CONCERN We herewith declare for our module with the following ID(s):
Grantee Code Equipment Product Code Check your GC here. Click Grantee Search. Check your CN here. FCC ID:
CN:
(Company Number) HVIN:
(Hardware Version Id. Number) HMN:
(Host Marketing Name) UPN:
(Unique Product Number) PMN:
(Product Marketing Name) FVIN:
(Firmware Version Id. Number) 1. Device functionality WLAN 2.4 GHz
(2400 - 2483.5 MHz) WLAN 5 GHz DFS: U-NII 2A & 2C
(5250 - 5350 MHz & 5470 - 5725 MHz) WLAN 5 GHz Non-DFS: U-NII 1 & 3)
(5150 - 5250 MHz & 5725 - 5850 MHz) Master N/A Master N/A Master N/A Client (slave) Client (slave) with radar detection Client (slave) without radar detection Client (slave) According to 15.202, KDB 905462, RSS-247, respectively:
A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices. A client (slave) device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode cannot initiate, or be configured to initiate, any transmissions including transmissions from probes, beacons or support ad-hoc modes (or other peer to peer modes) of operation without permission from an approved master device with radar detection capability. 2. Operating modes Frequency
(MHz) Active scanning:
the device can transmit a probe
(beacon) Passive scanning:
the device can listen only with no probes Ad-hoc mode capability Access point capability 2400 - 2483.5 Yes 5150 - 5250 Yes 5250 - 5350 Yes 5470 - 5725 Yes 5725 - 5850 Yes No No No No No Yes Yes Yes Yes Yes No No No No No Yes Yes Yes Yes Yes No No No No No Yes Yes Yes Yes Yes No No No No No Info:
DFS bands marked in blue. Dynamic Frequency Selection (DFS) is a mechanism that dynamically detects signals from other systems and avoids co-channel operation with these systems, notably radar systems. DFS requirements to a master/client device are described in 15.407, RSS-247, respectively. 3. Miscellaneous Has the device the option to set or select country codes or permit similar configuration options through software parameters for different regulatory domains to configure the device transmitter power or frequency or other technical parameters by end users or professional installers (see KDB 594280 D01, IV.A.)?
Is the device capable of operating in channel 12 and 13?
Is the device capable of transmitting in the band 5600 - 5650 MHz?
Yes No Yes No Yes No If you have any questions, please feel free to contact us at the address shown below. Best regards, Company Name:
Company Address:
Contact Name:
Signature:
Phone:
Fax:
E-mail:
Signature Date:
Document Version 1.1 2023-07-31