FCC ID: 2A8SE-22090002 True wireless Bluetooth

thinkplus LivePods LP1

(1)

(2)

(3)

(4)

(5)

(6) V5.3 10M 30mAh 4 1.5 5V 30mA 230mAh 1.5 5V 230mA thinkplus LivePods LP1 X2 X1 Type-C5V

() X1 X1 LED

:5V 30mA()

:5V 230mA() Type-C

Lenovo thinkplus LivePods LP1 Usage Instruction Product specication

(1) Dont attempt to disassemble the unit and change any part, except there is operation method mentioned in the manual.

(2) Dont expose the unit to liquid, moisture or humidity, since it is not a waterproof product.

(3) Disconnect the unit with your BT device and move it to the safe area if the liquid get inside the unit.

(4) Dont assemble or disassemble the unit to avoid electric shock, if there is water on your hands.

(5) Dont expose the unit to extremely high temperature or dispose of the unit in re as it will result in an explosion.

(6) Dont place the unit in an electromagnetic interference environment to avoid malfunction. Packing list Headphone X 2 Charging case X 1 Lenovo thinkplus LivePods LP1 Manual Please read all instructions carefully and retain for future use User manual X 1 Charging cable X 1 Product schematic description BT Version: V5.3 Transmission distance: 10M Battery capacity: 30mAh Playing time : About 4 hours (headphone) Charging time : About 1 hours (headphone) Rated input: 5V 30mA Charging case specication Battery capacity: 230mAh Charging time : About 1.5 hours Rated input : 5V 230mA

(All technical information is subject to actual performance) To Charge the case Connect the Type-C cable to the 5V power adaptor, and another end to the charging port of the Charging Case. Connect the Type-C cable to the 5V power adaptor, and another end to the charging port of the Charging Case. Manual Please read all instructions carefully and retain for future use MF button LED Indicator Status LED indicator Rated input 5V 30mA (headphones) Rated input 5V 230mA (Case) Headphone Charging case TYPE-C Case LED Indicator Charge the charging case (not fully charged): The indicator light will be ash in red. The charging case is fully charged: The indicator light will keep on. 1.

: 3S 2.

: 5S(

3. thinkplus-LP1

thinkplus -LP1 L R

+R

-L

Case LED Indicator Low power of charging case : The indicator light ashes red. The headphones are not fully charged: The indicator will stay in white. Fully charged the headphones: The indicator light is turn off. Product operating instructions 1. Power on:

Method 1: Open the case, the headphones will turn on automatically. Method 2: Long touch the MF button of the headphones for 3s to turn on the headphones. 2. Power off Method 1 : Put the headphones into the charging case directly and close the case to turn off. Method 2 : Long touch the MF button of the headphones for 5s to turn off the headphones.(The headphone is not connected to the BT device) 3.Pairing to the BT device Step 1: open the upper cover of the charging case, and the main and auxiliary headphones will automatically connected;

Step 2: open the BT list of smart devices, search "thinkplus-LP1"

and Connect (single ear use is supported). Set BT BT My device thinkplus - LP1

30 F C C 2S

2STone

(Pb) (Hg) (Cd)

(Cr(VI))

(PBB)

(PBDE) SJ/T 11364 GB/T 26572 GB/T 26572 X

5 12 13 FCC15B

FCC15 1 2 FCC ID2A8SE-22090002 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 400-812-0102 frank@szeysan.cn 2022 Touch control button operating Music playing mode Left/Right headphone operating Name and content of hazardous substances in products Name and content of hazardous substances in products Last songShort press the MF button of left headphone 3 times. Next songShort press the MF button of right headphone 3 times. Volume +Short press the MF button of right headphone. Volume -Short press the MF button of left headphone. Pause/PlayShort press the MF button of one headphone 2 times Hands free function Left/ Right headphone operating ( incoming call) Answer incoming call Short press the MF button of any headphones 2 times. Reject: Long press the MF button of any headphone for 2 seconds. Hang up: Short press the MF button of any headphone 2 times Active the voice assistant function (the smart devices support voice assistant function) Left/ Right headphone operating Activation: Press and hold the MF button of any headphone for 2 seconds, then hear Tone to release. Restore factory settings When you turn on the headphones, make sure it does not connect to any BT device, and click the MF button 5 times to clear the pairing record, then turn off the headphones. Harmful materials Pb Hg Cd Cr(VI) PBB PBDE Part Name Printed circuit assembly Small structural parts such as shell This form is compiled in accordance with SJ/T 11364. Indicates that the content of the hazardous substance in all homogeneous materials of the part is in Below the limit requirements specied in GB/T 26572. Indicates that the content of the hazardous substance in at least one of the homogeneous materials of the part exceeds The limit requirements specied in GB/T 26572. The parts marked with "X" on the form are all harmful due to the limitations of global technological development.Substitution of substances. Printed circuit board components*: including printed circuit boards and their parts, electronic components, etc.,Depending on the product model, the product you purchased may not contain all the above components Electronic and electrical products sold in the Peoples Republic of China must mark this Logo, the number in the logo represents the product under normal use Environmental protection use period. Warranty statement Disclaimer This user manual does not have any form of guarantee, position expression or other implication.The mentioned products, specications and information are for reference only, and the content will also be updated on the webpage at any time, without additional line notication. Warranty statement:

The product attached to this document is guaranteed as follows: If the product is twelve (12) months from the date of purchase

("Warranty Period"), under normal conditions of use due to quality defects damaged, can be repaired free; if the manufacturer conrms that it cannot be repaired, free replacement; repaired or replaced product, Continue to enjoy the warranty during the remaining warranty period (the shortest not less than 30 days). Purchase date by sale The ticket date shall prevail; if the purchase date cannot be determined, the warranty period shall be 13 Months calculation. If you apply for a warranty, please call the product service hotline rst and execute it in the manner instructed by us. When applying for warranty, you need to provide an accurate, complete and clearly lled out valid sales invoice. The above guarantee does not apply to the following situations:

1. The validity period of the three packs is exceeded;

2. Alteration of the warranty card and product code does not match the product body;

3. Causes caused by misuse, abuse or improper transportation, use, maintenance or storageimpaired or damaged;

4. Failure or damage caused by force majeure (such as earthquake, war, re, etc.) or accident bad;

5. The zipper and buckle are damaged due to excessive force;

6. Disconnection or tearing caused by excessive load;

7. Any damage caused by sharp objects;

8. Products with signs of burning or water immersion;

9. Damage caused by unauthorized disassembly;

10. Aging, discoloration, abrasion, rupture and other losses occurred during normal use of the product. 11. If the original identication label of the product is changed or damaged, this guarantee will become invalid. The completeness and appearance of the product and accompanying materials are not within the scope of the guarantee. You should Check on the spot and raise objections to any discrepancies. The above guarantees are all guarantees we make regarding the products, and are only applicable in mainland China. Nothing in this document affects consumer rights that cannot be excluded or restricted under the law prot. After-sales service Emal: frank@szeysan.cn Service supervision hotline: 400-812-0102

, belongs to afliated enterprises of Lenovo Group. Mentioned other trademarks, company names, products or services'name may be a trademark of afliated enterprises of Lenovo Group or another company. Copyright 2022 Lenovo Group and its licensors. All rights reserved. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televisi on reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following twoconditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC ID2A8SE-22090002

DATE: 2022/9/26 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, | appoint_ Building C, Hongjingda Industrial Park, 107 Shiyan North Ring Road, Bao an District, Shenzhen, Guangdong Province, China (Name of Agent company name and address) to act as our agent in the preparation of this application for equipment certification. | certify that submitted documents properly describe the device or system for which equipment certification is sought. | also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commissions regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, | acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with Lenovo (Beijing) Co. LTD Building 2, Building 2, No.6, Xindi West Road, Haidong District, Beijin

(Applicant Name and address)

<Signature> J garg x dow han Name: Jiangxiaohan Title: Product Manager Company: Lenovo (Beijing) Co. LTD

DATE2023/1/13 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: _2A8SE-22090002 _ Product Name: _True wireless Bluetooth __ Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission's rules, we hereby request that the following documents be held confidential:

(List here the documents for which you are seeking confidentiality for example ...) e Schematics e Block diagram e Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors.

<Signature> J ee xda2 han Name: Jiangxiaohan Title: Product Manager Company: Lenovo(Beijing)Co.,Ltd

SPECIFICATIONS

CUSTOMER:

DESCRIPTION:

CUSTOMER PART No:

OUR MODEL NO:

DATE:

PBX3216MC02 2020/12/22

, PLEASE RETURN TO US ONE COPY OF SPECIFICATION FOR APPROVAL WITH YOUR APPROVED SIGNATURES X.X UNLESS OTHER SPECIFIED TOLERANCES ON X A N G L E S SCALEN/A DRAWN BY : Sera H O L E D I A UNITmm CHECKED BY: XD X.XX DESIGNED BY: Sera APPROVED BY: XD TITLECHIP2450-3216 Specification THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF PBXY TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT NO. 3216 SPEC REV. P1 PBX3216MC02 Specification Operating Temp. : -40~+85 1. FEATURES:

Light weight, compact Wide bandwidth, low cost Built-in antenna with high gain 2. APPLICATIONS:

Bluetooth, Wireless LAN, Mobile TV Home RF System, etc 3. PRODUCT IDENTIFICATION C H I P 2 4 5 0 3 2 1 6

(1)

(2)

(3)

(1) Product type: Multilayer chip Antenna

(2) Center Frequency: 2450MHz

(3) External Dimensions (LW) (mm): 3.2*1.6 4. SHAPE AND DIMENSIONS:

L W H A 3.20.2 1.60.2 0.520.1 0.40.1 X.X UNLESS OTHER SPECIFIED TOLERANCES ON X A N G L E S SCALEN/A DRAWN BY : Sera H O L E D I A UNITmm CHECKED BY: XD X.XX DESIGNED BY: Sera APPROVED BY: XD TITLECHIP2450-3216 Specification THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF PBXY TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT NO. 3216 SPEC REV. P1 mm X.X UNLESS OTHER SPECIFIED TOLERANCES ON X A N G L E S SCALEN/A DRAWN BY : Sera H O L E D I A UNITmm CHECKED BY: XD X.XX DESIGNED BY: Sera APPROVED BY: XD TITLECHIP2450-3216 Specification THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF PBXY TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT NO. 3216 SPEC REV. P1 APPLICATION GUIDE 5. SPECIFICATIONS:

* Test condition: Test board size 90*40 mm Matching circuit: Pi matching circuit will be required X.X UNLESS OTHER SPECIFIED TOLERANCES ON X A N G L E S SCALEN/A DRAWN BY : Sera H O L E D I A UNITmm CHECKED BY: XD X.XX DESIGNED BY: Sera APPROVED BY: XD TITLECHIP2450-3216 Specification THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF PBXY TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT NO. 3216 SPEC REV. P1 6. Electrical Characteristics :

Mark 1 2 3 Frequency 2400 MHz 2440 MHz 2480 MHz VSWR 1.513 1.068 1.464 X.X UNLESS OTHER SPECIFIED TOLERANCES ON X A N G L E S SCALEN/A DRAWN BY : Sera H O L E D I A UNITmm CHECKED BY: XD X.XX DESIGNED BY: Sera APPROVED BY: XD TITLECHIP2450-3216 Specification THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF PBXY TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT NO. 3216 SPEC REV. P1 Radiation Pattern The Gain pattern is measured in FAR-field chamber. DUT is placed on the table of rotator,a standard horn antenna and Vector Network Analyzer is used to collect data. X.X UNLESS OTHER SPECIFIED TOLERANCES ON X A N G L E S SCALEN/A DRAWN BY : Sera H O L E D I A UNITmm CHECKED BY: XD X.XX DESIGNED BY: Sera APPROVED BY: XD TITLECHIP2450-3216 Specification THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF PBXY TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT NO. 3216 SPEC REV. P1 3D Gain Pattern (2400 MHz) 3D Gain Pattern (2440 MHz) 3D Gain Pattern (2480 MHz) X.X UNLESS OTHER SPECIFIED TOLERANCES ON X A N G L E S SCALEN/A DRAWN BY : Sera H O L E D I A UNITmm CHECKED BY: XD X.XX DESIGNED BY: Sera APPROVED BY: XD TITLECHIP2450-3216 Specification THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF PBXY TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT NO. 3216 SPEC REV. P1 7. Environmental Characteristics

(1) Reliability Test

(2) Storage Condition

(a) At warehouse:

The temperature should be within 0 ~ 30 and humidity should be less than 60% RH. The product should be used within 1 year from the time of delivery.

(b) On board:

The temperature should be within -40~85 and humidity should be less than 85% RH.

(3) Operating Temperature Range Operating temperature range : -40 to +105. X.X UNLESS OTHER SPECIFIED TOLERANCES ON X A N G L E S SCALEN/A DRAWN BY : Sera H O L E D I A UNITmm CHECKED BY: XD X.XX DESIGNED BY: Sera APPROVED BY: XD TITLECHIP2450-3216 Specification THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF PBXY TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT NO. 3216 SPEC REV. P1 8. Recommended Reflow Soldering

(1) Soldering Gun Procedure Note the follows, in case of using solder gun for replacement.

(a) The tip temperature must be less than 350C for the period within 3 seconds by using soldering gun under 30 W.

(b) The soldering gun tip shall not touch this product directly.

(2) Soldering Volume Note that excess of soldering volume will easily get crack the body of this product. X.X UNLESS OTHER SPECIFIED TOLERANCES ON X A N G L E S SCALEN/A DRAWN BY : Sera H O L E D I A UNITmm CHECKED BY: XD X.XX DESIGNED BY: Sera APPROVED BY: XD TITLECHIP2450-3216 Specification THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF PBXY TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT NO. 3216 SPEC REV. P1 9. Taping Package and Label Marking: (unit: mm)

(1) Quantity/Reel: 5000pcs/Reel

(2) Carrier tape dimensions

(3) Taping reel dimensions X.X UNLESS OTHER SPECIFIED TOLERANCES ON X A N G L E S SCALEN/A DRAWN BY : Sera H O L E D I A UNITmm CHECKED BY: XD X.XX DESIGNED BY: Sera APPROVED BY: XD TITLECHIP2450-3216 Specification THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF PBXY TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT NO. 3216 SPEC REV. P1

Declaration FCC ID:2A8SE-22090002 Product Name:True wireless Bluetooth Mode No:LenovoLP1 We.declare that the device have left and right earphone,the left and right earphone are electrically identically. NameJiangxiaohan Title:product manage Company:Lenovo (Beijing) Co. LT agit? hom