Instruction DP2.0 Starter Kit Module x 60 Item no. 2042812 Module Remover x 2 Charging Tower x 1 Item no. 2042810 Power Adapter with Accessories x 1 Other Required Components (Sold Separately) Transmitter x 1 Item no. 2042811 iPad mini x 1 IMPORTANT! BEFORE FIRST USE Getting a Working Channel and Setup the Modules This is mandatory to set the channels of the modules before the modules work correctly and prevent interference with other DP2.0 systems. Please follow the below steps to set the corresponding channel of the modules. 1. Using the controller iPad mini, download the Luminous RMM app from the AppStore 2. IMPORTANT! A channel (No.1-8) will be assigned upon starting the app for the first time. This channel no. is important to connect modules to the controller iPad. Please write it down and keep it in a safe place. 3. On the left side of the charging tower, flip open the cover of control panel 4. 5. Set the assigned channel using the channel dial, then close the control panel cover. The charging tower is ready to assign channel to the modules. Plug all modules (60 pcs in the starter kit) onto the charging tower, the assigned channel will be set on these modules. Please note that this will overwrite any previously set channel on the module. 6. Leave the modules on the charging tower for 8-10hrs until fully charged (charging LED of the module turns green) 7. The modules are ready to use Charging 1. If the module has been installed to the basket, remove the module using the Module Remover 2. 3. 4. 5. Plug the module onto the tower. The module LED will lit RED while charging, and turn to GREEN when the module is fully charged. Full charge will take approximately 8-10hrs The module is ready to use Operation 1. 2. 3. 4. 5. 6. Take a fully charged module from the Charging Tower. Simply pull the module away from the tower. Install the fully charged module into the base of the label Turn on the module Plug the Transmitter (sold separately) to the power source. It will be turned on automatically and a Red LED will flash Start the iPad app, then click on the wireless button and select the connecting kit LED on the connecting kit will flash in Green color indicating the connecting kit is connected with the app 7. Use the app to control the lighting effort of the DP2.0 array 8. The maximum effective distance between the transmitter and the modules is 30m Removing Module 6 7 8 5 4 3 2 1 1. Place the bottle with the label and module on the Module Remover 2. Align the bottle to the corresponding ring size 3. 4. Press the bottle down The module will be extracted and collected in the collection bin for reuse Warnings Other Information 1. Dont drop any components as it will damage the products 2. Dont expose any components to an open flame 3. Dont expose any components to direct sunlight 4. Dont splash water onto the charging tower 5. Dont immerse the modules and the baskets in liquids for a long period of time 6. Always operate the modules and the basket within the stated effective range 30m 7. Wipe away all liquid and let dry the module and the baskets after exposed to liquid 8. 9. 10. Use only the manufacturer supplied adapter 11. The manufacturer is not legally responsible for any kind of malfunction of the product directly Ensure the module and the charging tower are dry and free from debris before charging Ensure the module and the basket are dry and free from debris before installation caused by user negligence 12. The manufacturer is not responsible for unauthorized repair or modification of the product 13. The products communicating system can be disturbed by magnetic field or other wireless devices 14. The product is not intended for persons under the legal drinking age according to local laws The device meets low-power exclusion level, so the device complies with EMF basic restrictions according to standard EN 62479. Item No. Charging Tower:
Transmitter:
Rechargeable Power Module:
Bracket Brut:
Bracket Ros:
FCC ID Rechargeable Power Module:
Transmitter:
Power Rating Charging Tower:
Transmitter:
Rechargeable Power Module:
2042810 STARTING KIT C1 DP 2042811 CONNECTING KIT C1 DP 2042812 ADDITIONAL KIT C1 DP 5150997 ETQ BTL WH LLAB2.0 DP 5150998 ETQ BTL RO LLAB2.0 DP 2ALCP2042812 2ALCP2042811 5.0V DC / 7.5A 5.0V DC / 1A 3.7V DC / 120mA Radio Operation Frequency Range and Max. Radio Power Transmitter:
2402-2408MHz, 4dBm 2402-2408MHz, 4dBm Rechargeable Power Module:
Made in China EU Declaration of Conformity We, LF BEAUTY LIMITED 2/F, HK Spinners Industrial Building, Phases I & II, 800 Cheung Sha Wan Road, Kowloon, Hong Kong Declare that the DoC is issued under our sole responsibility and belongs to the following product(s):
Item No. Charging Tower:
Transmitter:
Rechargeable Power Module:
Bracket Brut:
Bracket Ros:
2042810 STARTING KIT C1 DP 2042811 CONNECTING KIT C1 DP 2042812 ADDITIONAL KIT C1 DP 5150997 ETQ BTL WH LLAB2.0 DP 5150998 ETQ BTL RO LLAB2.0 DP The object of the declaration described above is in conformity with the essential requirements of the relevant Union harmonization legislation:
Radio Equipment Directive 2014/53/EU The following harmonized standards and technical specifications have been applied:
Health and Safety (Article 3.1a): EN 60950-1:2001+A2:2013 EN 624792010;
EMC (Article 3.1b):
EN 301 489-1 V2.1.1 EN 301 489-3 V2.1.1 EN 301 489-17 V3.1.1 EN 55015:2013 EN 61547:2009 EN 61000-3-2: 2014 EN 61000-3-3: 201 EN 55032:2015 EN 55024:2010 Radio Spectrum (Article 3.2): EN 300328 V2.1.1;
EN 300 330 V2.1.1 Technical Compliance File Held by:
LF BEAUTY LIMITED 2/F, HK Spinners Industrial Building, Phases I & II, 800 Cheung Sha Wan Road, Kowloon, Hong Kong Signed for and on behalf of LF BEAUTY LIMITED Name and Title:
Address:
Michael Ho, Merchandise Manager 2/F, HK Spinners Industrial Building, Phases I & II, 800 Cheung Sha Wan Road, Kowloon, Hong Kong __Hong Kong SAR__ Place of issue ____Dec 14, 2017______ Date of issue ______Michael Ho__________ Signature of Authorized Person