Confidential LG Innotek 4.2 3-color Graphic type ESL User manual Copyright. 2015. All Rights Reserved. 1. Overview Confidential LG Innotek
Remote control device provides customer with several functions as below
Waking Tag up from sleep mode
Updating new purchase image on Tag
Deleting purchase image on Tag
Returning a Tag to be factory settings Display Area Profile Hook Battery Cover
Remo-con description Copyright. 2015. All Rights Reserved.
LED : One of any buttons is pushed, red led turns on. After sending some data to a Tag, red led will turn off.
Registration : Updating New Purchase Information on Tag
Release : Deleting Purchase Information on Tag
Reset : Returning a Tag to be factory settings
Keep Alive : Waking Tag up from sleep mode 2. Updating new purchase image on Tag Confidential LG Innotek To change purchase information on Tag, perform the following steps :
1. 2. Put remote controller near center of Tags display Press and hold Registration button on remote controller until Red LED off
(about 0.5 seconds) 3. When Tag is successfully received Registration data from remote controller, Tags display will be changed to Connected for a few minutes. That means Tag hides purchase image to read Tags IEEE MAC address through the Barcode scanner. 4. In NMS Client, download new purchase image to the Tag in registration status 5. When image downloading is finished successfully, Tags display will be changed to new purchase image Case1) If image downloading is failed, Tags display will be changed to Busy. After Alive Time, this Tag will be download new purchase image again Copyright. 2015. All Rights Reserved. 3. Deleting purchase information on Tag Confidential LG Innotek To release(delete) purchase information on Tag, perform the following steps :
1. 2. 3. Put remote controller near center of Tag display Press and hold Release button until red LED off (about 0.5 seconds) If Tag was received Reset command from remote controller, Tag will delete purchase information and Tags display will be changed to Ready 4. After step.3, Tag goes to deep sleep mode and doesnt communicate with gateway until receiving Keep Alive or Registration data from remote controller Copyright. 2015. All Rights Reserved. 4. Waking Tag up Confidential LG Innotek Case 2 Case 3 To wake Tag up from sleep mode, perform the following steps :
1. 2. 3. Put remote controller near center of Tag display Press and hold Keep Alive button until Red LED off (about 0.5 seconds) Tag will wake up and goes to next step. Its depends on connection information with gateway case1) If this Tag wasnt connected with a gateway before sleep mode, go to 4-1 case2) If this Tag was connected with a gateway before sleep mode, go to 4-2 4-1. Searching gateway and goes to the next step. its depends on searching results case1) If Tag was successfully connected, Tags display will be changed to Ready case2) If Tag wasnt connected, Tags display(may be Ready) will be refreshed 4-2. Sending Keep Alive packet to gateway and Tag will go to sleep mode again case1) If Tag was received response from gateway, this Tag will go to sleep mode until the specified time in gateway. After sleep mode, this Tag will send Keep Alive Packet to gateway again. case2) If Tag wasnt received response from Gateway, this Tag will retry three times. After that, Tags display will be changed to Disconnected. Also, this Tag will perform a whole channel scan every five minutes. Copyright. 2015. All Rights Reserved. 5. Returning a Tag to be factory settings Confidential LG Innotek To make a Tag to be factory reset status, perform the following steps :
1. 2. 3. Put remote controller near center of Tag display Press and hold Reset button until Red LED off (about 0.5 seconds) If Tag was received Reset command from remote controller, Tag goes back to factory settings and Tags display will be changed to Ready 4. After step.3, Tag goes to deep sleep mode and doesnt communicate with gateway until receiving Keep Alive or Registration data from remote controller case1) If Tag was received Keep Alive or Registration command from remote controller, this Tag will perform a whole channel scan. case2) If Tag was received Reset or Release command from remote controller, Tags display will be changed to Ready again Copyright. 2015. All Rights Reserved. 6. Tag status Confidential LG Innotek Deep Sleep Mode Connected with Gateway Disconnected with Gateway Image download Failure(Busy) Battery discharge
(The battery needs to be replaced) Copyright. 2015. All Rights Reserved. 7. Regulation Information LG Innotek Confidential Copyright 2015. All Rights Reserved. LG Innotek Confidential 7
/