FCC ID: YZP-ATC6NPL002 RF Module

CUSTOMER :

DATE :

SPECIFICATIONS FOR APPROVAL PRODUCT NAME : Bluetooth v5.1 / Wi-Fi 6 MIMO Module MODEL NAME : ATC6NPL002 CUSTOMER P/N :

APPROVAL REMARK APPENDIX Designed Checked Approved LG Innotek Co., Ltd. DOCUMENT No. ATC6NPL002 (6-3) PAGE 1 / 17

(00)-0070 TITLE : Specifications for approval (ATC6NPL002) REV 1.0(2 / 17)

[Confidential]

(CUSTOMER P/N : ) 1. Application This specification is applied to LG Innotek Bluetooth v5.1 and Wi-Fi 6 (IEEE 802.11a/b/g/n/ac/ax) Combo Module ATC6NPL002 which includes chipset NXP 88Q9098. 2. Quality Quality should meet each condition which mentioned on this specification. However, the items which are not mentioned on this specification follow the inspection agreements and standards which are agree with both companies. 3. Appearance and Characteristics 1) Appearance Appearance should not contaminated by harmful materials and should not have cracks etc. Mechanical dimensions should meet the contents of clause 8. 2) Characteristics Electrical characteristics should meet the contents of clause 10. 4. Application of Bluetooth v5.1 and Wi-Fi 6 (IEEE 802.11a/b/g/n/ac/ax) Module 1) Automotive 5. Operating Condition 1) Maximum Rating No. ITEM 1 2 3 4 5 6 Operating Temperature Range Storage Temperature Range VDD_3V3 Voltage Range(3.3V) VDVD_1V8 Voltage Range(1.8V) VIO (1.8V) VIO (3.3V) Max. Current consumption (1.8V) Max. Current consumption (3.3V) Min.

-40

-40

-0.3

-0.3

-0.3

-0.3 Typ.

+25

+25

+3.3

+1.8

+1.8

+1.8

Max. UNIT

+85

+105 3.63 2.16 1.98 3.63 930 1,140 V V V V mA mA 1.0 2022. 03. 14. Rev1.0 Release LG Innotek Co., Ltd DSGD CHKD APPD ATC6NPL002 DOCUMENT NO. ATC6NPL002(6-3)

(30) - 4021 R E V LG Innotek Confidential : This document is protected by security policies and laws. TITLE : Specifications for approval (ATC6NPL002) REV 1.0(3 / 17)

(CUSTOMER P/N : )

[Confidential]

2) Recommended Operating Condition ITEM Operating Temperature Range Storage Temperature Range VDD_3V3 Voltage Range(3.3V) VDVD_1V8 Voltage Range(1.8V) No. 1 2 3 4 6. Test Min.

-40

+3.14

+1.71 Typ. Max. UNIT

+3.3

+1.8

+85

+105

+3.46

+1.89 V V Electrical characteristics are tested for every products. However, if there are any objection in judgments, it should be treated with agreements of companies. 7. Labeling Information RHEA ATC6NPL002 LGIT 0921 3 C 001 FCC ID : YZP-ATC6NPL002 IC : 7414C-ATC6NPL002 RHEA ATC6NPL002 LGIT x x xx x x xxx No. Index PRODUCT FAMILY MODEL PART NO. COMPANY MANUFACTURED YEAR (0~9) MANUFACTURED MONTH(1,2, 9, A,B,C) MANUFACTURED DATE (1~31) Manufactured Serial Number : SMT Line no Manufactured Serial Number : Shift no(A,B,C) Manufactured Serial Number : (001~999) B C6NPL002 0921 3C001 2001-0001 B: BT/WLAN Module C6NPL002: Model Part No. 0921: Manufactured Date 3C001: Manufactured Serial Number 2001 : LGIT Management Number 0001: Marking Serial Number R E V 1.0 2022. 03. 14. Rev1.0 Release LG Innotek Co., Ltd DSGD CHKD APPD ATC6NPL002 DOCUMENT NO. ATC6NPL002(6-3)

(30) - 4021 LG Innotek Confidential : This document is protected by security policies and laws. TITLE : Specifications for approval (ATC6NPL002) REV 1.0(4 / 17)

[Confidential]

(CUSTOMER P/N : ) 8. General Features Operation voltage is 3.3V and 1.8V Automotive module (All components are qualified for AEC-Q100/200) Support 2 Antenna port with 2x2 MIMO Use on-chip OTP(One-Time Programmable) Compliant with Wi-Fi 6 (IEEE 802.11a/b/g/n/ac/ax) Supports 2x2 Multi-User Multiple-Input Multiple-Output (MU-MIMO) Dual Band Simultaneous with dual MAC, 5 GHz PHY data rates up to 1.2 Gbps &

2.4 GHz PHY data rates up to 458 Mbps 20/40 MHz channel bandwidth for 2.4 GHz and 20/40/80 MHz for 5 GHz Dynamic Frequency Selection (DFS, radar detection). Offloading traffic for minimal host utilization. Low power PCIe v2.0 interface Compliant with BT v5.1 Supports 2 Mbps Bluetooth Low Energy (BLE) and BLE long range Simultaneous active ACL connection support Backward-compatible with previous BT standards. Flexible interface PCM/I2S for BT audio. Supports Bluetooth-WLAN coexistence and ISM-LTE coexistence.. RoHS Compliant R E V 1.0 2022. 03. 14. Rev1.0 Release LG Innotek Co., Ltd DSGD CHKD APPD ATC6NPL002 DOCUMENT NO. ATC6NPL002(6-3)

(30) - 4021 LG Innotek Confidential : This document is protected by security policies and laws. TITLE : Specifications for approval (ATC6NPL002) REV 1.0(5 / 17)

[Confidential]

(CUSTOMER P/N : ) 9. Electrical Specification 9.1 Power On/Off Sequence and Reset 1) Power On Sequence b: Should be delayed from VDD_3V3 high(at least 90%) to start of VDD_1V8 ramp-up, it is 100msec typical(Min 0ms). Note: Before boot up or any Reset, BT_HOST_WAKE, WLAN_HOST_WAKE should be kept as high status. After reset these pins definition change immediately. R E V 1.0 2022. 03. 14. Rev1.0 Release LG Innotek Co., Ltd DSGD CHKD APPD ATC6NPL002 DOCUMENT NO. ATC6NPL002(6-3)

(30) - 4021 LG Innotek Confidential : This document is protected by security policies and laws. TITLE : Specifications for approval (ATC6NPL002) REV 1.0(6 / 17)

[Confidential]

(CUSTOMER P/N : ) 9. Electrical Specification 9.2 Power On/Off Sequence and Reset 2) Power Off Sequence PDN VDD_1V8 VDD_3V3/VIO To reduce leakage, ramp down VDD_1V8 before VDD_3V3/VIO. Required minimum falling time is 0ms R E V 1.0 2022. 03. 14. Rev1.0 Release LG Innotek Co., Ltd DSGD CHKD APPD ATC6NPL002 DOCUMENT NO. ATC6NPL002(6-3)

(30) - 4021 LG Innotek Confidential : This document is protected by security policies and laws. TITLE : Specifications for approval (ATC6NPL002) REV 1.0(7 / 17)

(CUSTOMER P/N : )

[Confidential]

9. Electrical Specification 9.3 UART Interface 1) Overview The 88Q9098 supports the High-Speed UART interface R E V 1.0 2022. 03. 14. Rev1.0 Release LG Innotek Co., Ltd DSGD CHKD APPD ATC6NPL002 DOCUMENT NO. ATC6NPL002(6-3)

(30) - 4021 LG Innotek Confidential : This document is protected by security policies and laws. TITLE : Specifications for approval (ATC6NPL002) REV 1.0(8 / 17)

(CUSTOMER P/N : )

[Confidential]

9. Electrical Specification 9.4 PCM Interface 1) Master mode timing diagram Parameter Min. Typ. Max. Units PCM bit clock frequency (FBCLK)

2 / 2.048

MHz Duty Cycle BCLK 0.4 0.5 TBCLK Rise/fall TDO TDISU TDIHO TBF

20 15

3

0.6

15

15

ns ns ns ns ns R E V 1.0 2022. 03. 14. Rev1.0 Release LG Innotek Co., Ltd DSGD CHKD APPD ATC6NPL002 DOCUMENT NO. ATC6NPL002(6-3)

(30) - 4021 LG Innotek Confidential : This document is protected by security policies and laws. TITLE : Specifications for approval (ATC6NPL002) REV 1.0(9 / 17)

(CUSTOMER P/N : )

[Confidential]

9. Electrical Specification 9.5 PCM Interface 1) Slave Mode Parameter Min. Typ. Max. Units PCM bit clock frequency (FBCLK)

2 / 2.048

MHz Duty Cycle BCLK TBCLK Rise/fall TDO TDISU TDIHO TBFSU TBFHO 0.4

15 10 15 10 0.5 3

0.6

30

ns ns ns ns ns ns R E V 1.0 2022. 03. 14. Rev1.0 Release LG Innotek Co., Ltd DSGD CHKD APPD ATC6NPL002 DOCUMENT NO. ATC6NPL002(6-3)

(30) - 4021 LG Innotek Confidential : This document is protected by security policies and laws. TITLE : Specifications for approval (ATC6NPL002) REV 1.0(10 / 17)

[Confidential]

(CUSTOMER P/N : ) 9. Electrical Specification 9.6 Recommend Operating Voltage No. ITEM Min. Typ. Max. UNIT 1 2 3 VDD_3V3 VDD_1V8 VIO 3.14 1.71 1.71 3.14 3.3 1.8 1.8 3.3 3.46 1.89 1.89 3.46 V V V 9.7 Moisture Sensitivity Level MSL 3 Level (Floor Life Time : 168Hrs. / Condition : 30, 60% RH) Standard : IPC / JEDEC J-STD-020C Reflow Total MAX Three Times ( LGIT : Used 1 Times / 2 times remaining) R E V 1.0 2022. 03. 14. Rev1.0 Release LG Innotek Co., Ltd DSGD CHKD APPD ATC6NPL002 DOCUMENT NO. ATC6NPL002(6-3)

(30) - 4021 LG Innotek Confidential : This document is protected by security policies and laws. TITLE : Specifications for approval (ATC6NPL002) REV 1.0(11 / 17)

[Confidential]

(CUSTOMER P/N : ) 10. Pin Configuration

<Top Through View>

R E V 1.0 2022. 03. 14. Rev1.0 Release LG Innotek Co., Ltd DSGD CHKD APPD ATC6NPL002 DOCUMENT NO. ATC6NPL002(6-3)

(30) - 4021 LG Innotek Confidential : This document is protected by security policies and laws. TITLE : Specifications for approval (ATC6NPL002) REV 1.0(12 / 17)

(CUSTOMER P/N : )

[Confidential]

10. Pin Configuration1) No Pin Name I/O Power Domain Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 NC GPIO_0 CONFIG_HOST2 PDn N/C VDD_3V3 VDD_3V3 GND VIO N/C GND WLAN_HOST_WAKE BT_HOST_WAKE WL_RESET BT_RESET N/C BT_DEV_WAKE PCIE_CLKREQ_L PCIE_RX_N PCIE_RX_P PCIE_CLK_N PCIE_CLK_P PCIE_TX_P PCIE_TX_N PCIE_WAKE_L PCIE_RST_L N/C LTE_Co-ex_TX LTE_Co-ex_RX GPIO_21 GPIO_23 VDD_1V8

I/O

I

I I

I

I/O I/O I/O I/O

I/O I/O I I I I O O I/O I/O

I/O I/O I/O I/O I 1) Pin configuration can be changed

VIO 1.8V 1.8V

3.3V 3.3V

VIO

VIO VIO VIO VIO VIO VIO 1.8V 1.8V 1.8V 1.8V 1.8V 1.8V VIO VIO

VIO VIO VIO VIO Reserved GPIO for Host control Boot configuration. Full power down (active low) Reserved Supply Voltage for VDD 3.3V Supply Voltage for VDD 3.3V Ground Supply Voltage for I/O. Select 3.3V or 1.8V Reserved Ground WLAN device to wake up host BT device to wake up host WLAN reset. Active high / Low in reset. Bluetooth reset. Active high / Low in reset. Reserved Host wake up to BT device PCI express Reference Clock Request PCI express Differential Receive Negative PCI express Differential Receive Positive PCI express Differential Reference Clock Negative PCI express Differential Reference Clock Positive PCI express Differential Transmit Positive PCI express Differential Transmit Negative Request to service a function-initiated wake event PCI express reset with weak pull-down Reserved LTE co-existence UART Transmit LTE co-existence UART Receive LTE co-existence interface arbiter LTE co-existence interface arbiter 1.8V Supply Voltage for VDD 1.8V 1.0 2022. 03. 14. Rev1.0 Release LG Innotek Co., Ltd DSGD CHKD APPD ATC6NPL002 DOCUMENT NO. ATC6NPL002(6-3)

(30) - 4021 R E V LG Innotek Confidential : This document is protected by security policies and laws. TITLE : Specifications for approval (ATC6NPL002) REV 1.0(13 / 17)

[Confidential]

(CUSTOMER P/N : ) 10. Pin Configuration1) No 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 Pin Name VDD_1V8 PCM_SYNC PCM_OUT PCM_CLK PCM_IN UART_CTS UART_RTS UART_RXD UART_TXD GND GPIO_22 GND N/C GND ANT2 GND N/C N/C N/C N/C GND ANT1 GND GND GND GND GND GND GND GND I/O Power Domain Description I I O I I I O I O

I

I/O

I/O

1.8V Supply Voltage for VDD 1.8V VIO VIO VIO VIO VIO VIO VIO VIO

VIO

Bluetooth PCM synchronization signal / I2S word select Bluetooth PCM output signal / I2S serial data output Bluetooth PCM clock signal / I2S serial clock Bluetooth PCM input signal / I2S serial data input Bluetooth UART Clear to Send Bluetooth UART Ready to Send Bluetooth UART Receive Bluetooth UART Transmit Ground GPIO for Host control Ground Reserved Ground BT/ WiFi 2.4G & 5G RF Ground Reserved Reserved Reserved Reserved Ground WiFi 2.4G & 5G RF Ground Ground Ground Ground Ground Ground Ground Ground 1) Pin configuration can be changed 1.0 2022. 03. 14. Rev1.0 Release LG Innotek Co., Ltd DSGD CHKD APPD ATC6NPL002 DOCUMENT NO. ATC6NPL002(6-3)

(30) - 4021 R E V LG Innotek Confidential : This document is protected by security policies and laws. TITLE : Specifications for approval (ATC6NPL002) REV 1.0(15 / 17)

(CUSTOMER P/N : )

[Confidential]

12. Reflow Profile Temperature 250 217 Tsmax 200 3 per second 6 per second maximum 150 Tsmin 3 per second maximum 60~120 sec 60~150 sec Ramp up Soak(flux activation) Reflow Cool down t [sec]

Profile Feature Pb-free Assembly Initial ramp-up rate 3 per second maximum Preheat Temperature minimum(Tsmin) Temperature maximum(Tsmax) Time(minimum to maximum) 150 200 60-120s Ramp-up rate Tsmax to TL 3 per second maximum Liquidus Temperature(TL) Time above TL Peak temperature 217 60-150s 250 maximum Time within 5 of actual peak 10s Ramp-down rate 6 per second maximum R E V 1.0 2022. 03. 14. Rev1.0 Release LG Innotek Co., Ltd DSGD CHKD APPD ATC6NPL002 DOCUMENT NO. ATC6NPL002(6-3)

(30) - 4021 LG Innotek Confidential : This document is protected by security policies and laws. TITLE : Specifications for approval (ATC6NPL002) REV 1.0(16 / 17)

(CUSTOMER P/N : )

[Confidential]

13. Certification information 13.1 FCC information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator &

your body. OEM INTEGRATION INSTRUCTIONS:

This device is intended only for OEM integrators under the following conditions:

The module must be installed in the host equipment such that 20 cm is maintained between the antenna and users, and the transmitter module may not be co-located with any other transmitter or antenna. The module shall be only used with the internal on-board antenna that has been originally tested and certified with this module. External antennas are not supported. As long as these 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). The end-product may need Verification testing, Declaration of Conformity testing, a Permissive Class II Change or new Certification. Please involve a FCC certification specialist in order to determine what will be exactly applicable for the end-product. 1.0 2022. 03. 14. Rev1.0 Release LG Innotek Co., Ltd DSGD CHKD APPD ATC6NPL002 DOCUMENT NO. ATC6NPL002(6-3)

(30) - 4021 R E V LG Innotek Confidential : This document is protected by security policies and laws. TITLE : Specifications for approval (ATC6NPL002) REV 1.0(17 / 17)

[Confidential]

(CUSTOMER P/N : ) 13. Certification information List of applicable FCC rules List the FCC rules that are applicable to the modular transmitter. These are the rules that specifically establish the bands of operation, the power, spurious emissions, and operating fundamental frequencies. DO NOT list compliance to unintentional-radiator rules (Part 15 Subpart B) since that is not a condition of a module grant that is extended to a host manufacturer. See also Section 2.10 below concerning the need to notify host manufacturers that further testing is required.3 Explanation: This module meets the requirements of FCC part 15C(15.247). Summarize the specific operational use conditions Describe use conditions that are applicable to the modular transmitter, including for example any limits on antennas, etc. For example, if point-to-point antennas are used that require reduction in power or compensation for cable loss, then this information must be in the instructions. If the use condition limitations extend to professional users, then instructions must state that this information also extends to the host manufacturers instruction manual. In addition, certain information may also be needed, such as peak gain per frequency band and minimum gain, specifically for master devices in 5 GHz DFS bands. Explanation: The EUT has a dipole antenna and a external unique connector. Limited module procedures If a modular transmitter is approved as a limited module, then the module manufacturer is responsible for approving the host environment that the limited module is used with. The manufacturer of a limited module must describe, both in the filing and in the installation instructions, the alternative means that the limited module manufacturer uses to verify that the host meets the necessary requirements to satisfy the module limiting conditions. A limited module manufacturer has the flexibility to define its alternative method to address the conditions that limit the initial approval, such as: shielding, minimum signaling amplitude, buffered modulation/data inputs, or power supply regulation. The alternative method could include that the limited module manufacturer reviews detailed test data or host designs prior to giving the host manufacturer approval. This limited module procedure is also applicable for RF exposure evaluation when it is necessary to demonstrate compliance in a specific host. The module manufacturer must state how control of the product into which the modular transmitter will be installed will be maintained such that full compliance of the product is always ensured. For additional hosts other than the specific host originally granted with a limited module, a Class II permissive change is required on the module grant to register the additional host as a specific host also approved with the module. Explanation: The module is not a limited module. R E V 1.0 2022. 03. 14. Rev1.0 Release LG Innotek Co., Ltd DSGD CHKD APPD ATC6NPL002 DOCUMENT NO. ATC6NPL002(6-3)

(30) - 4021 LG Innotek Confidential : This document is protected by security policies and laws. TITLE : Specifications for approval (ATC6NPL002) REV 1.0(18 / 17)

[Confidential]

(CUSTOMER P/N : ) 13. Certification information Trace antenna designs For a modular transmitter with trace antenna designs, see the guidance in Question 11 of KDB Publication 996369 D02 FAQ Modules for Micro-Strip Antennas and traces. The integration information shall include for the TCB review the integration instructions for the following aspects:

layout of trace design, parts list (BOM), antenna, connectors, and isolation requirements. a) Information that includes permitted variances (e.g., trace boundary limits, thickness, length, width, shape(s), dielectric constant, and impedance as applicable for each type of antenna);

b) Each design shall be considered a different type (e.g., antenna length in multiple(s) of frequency, the wavelength, and antenna shape (traces in phase) can affect antenna gain and must be considered);

c) The parameters shall be provided in a manner permitting host manufacturers to design the printed circuit (PC) board layout;

d) Appropriate parts by manufacturer and specifications;

e) Test procedures for design verification; and f) Production test procedures for ensuring compliance. The module grantee shall provide a notice that any deviation(s) from the defined parameters of the antenna trace, as described by the instructions, require that the host product manufacturer must notify the module grantee that they wish to change the antenna trace design. In this case, a Class II permissive change application is required to be filed by the grantee, or the host manufacturer can take responsibility through the change in FCC ID (new application) procedure followed by a Class II permissive change application. Explanation: Yes, The module with trace antenna designs, and This manual has been shown the layout of trace design, antenna, connectors, and isolation requirements. RF exposure considerations It is essential for module grantees to clearly and explicitly state the RF exposure conditions that permit a host product manufacturer to use the module. Two types of instructions are required for RF exposure information: (1) to the host product manufacturer, to define the application conditions (mobile, portable xx cm from a persons body); and (2) additional text needed for the host product manufacturer to provide to end users in their end-product manuals. If RF exposure statements and use conditions are not provided, then the host product manufacturer is required to take responsibility of the module through a change in FCC ID (new application). Explanation: This module complies with FCC RF radiation exposure limits set forth for an uncontrolled environment, This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body." This module is designed to comply with the FCC statement, FCC ID is: YZP-ATC6NPL002. R E V 1.0 2022. 03. 14. Rev1.0 Release LG Innotek Co., Ltd DSGD CHKD APPD ATC6NPL002 DOCUMENT NO. ATC6NPL002(6-3)

(30) - 4021 LG Innotek Confidential : This document is protected by security policies and laws. TITLE : Specifications for approval (ATC6NPL002) REV 1.0(19 / 17)

[Confidential]

(CUSTOMER P/N : ) 13. Certification information Antennas A list of antennas included in the application for certification must be provided in the instructions. For modular transmitters approved as limited modules, all applicable professional installer instructions must be included as part of the information to the host product manufacturer. The antenna list shall also identify the antenna types (monopole, PIFA, dipole, etc. (note that for example an omni-directional antenna is not considered to be a specific antenna type)). For situations where the host product manufacturer is responsible for an external connector, for example with an RF pin and antenna trace design, the integration instructions shall inform the installer that unique antenna connector must be used on the Part 15 authorized transmitters used in the host product. The module manufacturers shall provide a list of acceptable unique connectors. Explanation: The EUT has a dipole antenna and a external unique connector. Label and compliance information Grantees are responsible for the continued compliance of their modules to the FCC rules. This includes advising host product manufacturers that they need to provide a physical or e-label stating Contains FCC ID with their finished product. See Guidelines for Labeling and User Information for RF Devices KDB Publication 784748. Explanation: The host system using this module, should have label in a visible area indicated the following texts: "Contains FCC ID: YZP-ATC6NPL002. Information on test modes and additional testing requirements5 Additional guidance for testing host products is given in KDB Publication 996369 D04 Module Integration Guide. Test modes should take into consideration different operational conditions for a stand-

alone modular transmitter in a host, as well as for multiple simultaneously transmitting modules or other transmitters in a host product. The grantee should provide information on how to configure test modes for host product evaluation for different operational conditions for a stand-alone modular transmitter in a host, versus with multiple, simultaneously transmitting modules or other transmitters in a host. Grantees can increase the utility of their modular transmitters by providing special means, modes, or instructions that simulates or characterizes a connection by enabling a transmitter. This can greatly simplify a host manufacturers determination that a module as installed in a host complies with FCC requirements. Explanation: Top band can increase the utility of our modular transmitters by providing instructions that simulates or characterizes a connection by enabling a transmitter. R E V 1.0 2022. 03. 14. Rev1.0 Release LG Innotek Co., Ltd DSGD CHKD APPD ATC6NPL002 DOCUMENT NO. ATC6NPL002(6-3)

(30) - 4021 LG Innotek Confidential : This document is protected by security policies and laws.

[Confidential]

TITLE : Specifications for approval (ATC6NPL002) REV 1.0(20 / 17)

(CUSTOMER P/N : ) Additional testing, Part 15 Subpart B disclaimer The grantee should include a statement that the modular transmitter is only FCC authorized for the specific rule parts (i.e., FCC transmitter rules) listed on the grant, and that the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. If the grantee markets their product as being Part 15 Subpart B compliant (when it also contains unintentional-radiator digital circuity), then the grantee shall provide a notice stating that the final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed. Explanation: The module without unintentional-radiator digital circuity, so the module does not require an evaluation by FCC Part 15 Subpart B. The host shoule be evaluated by the FCC Subpart B. 13. Certification information Additional testing, Part 15 Subpart B disclaimer The grantee should include a statement that the modular transmitter is only FCC authorized for the specific rule parts (i.e., FCC transmitter rules) listed on the grant, and that the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. If the grantee markets their product as being Part 15 Subpart B compliant (when it also contains unintentional-radiator digital circuity), then the grantee shall provide a notice stating that the final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed. Explanation: The module without unintentional-radiator digital circuity, so the module does not require an evaluation by FCC Part 15 Subpart B. The host should be evaluated by the FCC Subpart B. R E V 1.0 2022. 03. 14. Rev1.0 Release LG Innotek Co., Ltd DSGD CHKD APPD ATC6NPL002 DOCUMENT NO. ATC6NPL002(6-3)

(30) - 4021 LG Innotek Confidential : This document is protected by security policies and laws. TITLE : Specifications for approval (ATC6NPL002) REV 1.0(21 / 17)

(CUSTOMER P/N : )

[Confidential]

13. Certification information 13.2 IC information This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s). L'opration est soumise aux deux conditions suivantes:

(1) cet appareil ne peut causer d'interfrences, et

(2) cet appareil doit accepter toute interfrence, y compris les interfrences qui peuvent causer un mauvais fonctionnement de l'appareil. The end product must be labeled to display the Industry Canada certification number of the module. Contains transmitter module IC: 7414C-ATC6NPL002 Le dispositif d'accueil doivent tre tiquets pour afficher le numro de certification d'Industrie Canada du module. Contient module metteur IC : 7414C-ATC6NPL002

* This device is going to be operated in 5 150 MHz ~ 5 250 MHz frequency range, it is restricted in indoor environment only. Information for OEM Integrator This device is intended only for OEM integrators under the following conditions:

1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. End product labelling The label for end product must include Contains FCC ID: YZP-ATC6NPL002, Contains IC: 7414C-ATC6NPL002. CAUTION: Exposure to Radio Frequency Radiation. This equipment complies with FCC & IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20cm between the radiator and your body. This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. This radio transmitter [7414C-ATC6NPL002] has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. 1.0 2022. 03. 14. Rev1.0 Release LG Innotek Co., Ltd DSGD CHKD APPD ATC6NPL002 DOCUMENT NO. ATC6NPL002(6-3)

(30) - 4021 R E V LG Innotek Confidential : This document is protected by security policies and laws.

LG Innotek Co., Ltd. FCC Software Configuration Control Declaration Date: March 25, 2022 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: ATC6NPL002 Regarding FCC Country Code Selection guidelines identified in KDB 594280. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Jeong Inchang Title: Senior Research Engineer Signature of applicant Date: March 25, 2022 FCC Software Configuration Control Declaration Rev1.1