FLAT IRON LCD 563LE/LS Users Guide Manuel dutilisation Guia del Usuario Manual do preprietario Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.
@ tc FCC Warning Class B Computing Device Information to the User This equipment has been tested and found 10 comply with the limits for a class B digital device pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential tastal-
lation. This equipment generates, uses, and can radiatc radio frequency energy and, if not installed and used in accordance with the instructions, may cause hannful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this cquipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reoricnt or relocate the receiving anteana.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for heip and for additional suggestions. The user may find the following booklet prepared by the Federal Communica-
lions Commission helpful: How to Identify and Resolve Radio-TV interterence Problems. This booklet is available {rom the U.S. Government Printing Office, Washington, D.C. 20402, Stock No. 004-000-00345-4. FCC Warning The user is cautioned thal changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipmeat. NOTE: [n order for an installation of this product to maintain compliance with the limits for a Class B device, shielded cables must be used. Introduction. .......cscscccsssseessees Connecting the Monitor Location and Function of Controls Control Panel FUNCTION ........sssscsssssesesssussoresnecnsssnsssonsnnsssscneseonoeneeasensseees On Screen Display (OSD) Control Adjustment.........cscssssessssseseceersess On Screen Display(OSD) Selection and Adjustment Video Memory MOdeS......ssssssssssssssssessssssssnsnssssssevsssnussnsansnnnsnsenenenssnnnansnsnsnsnnennanneas Troubleshooting Introduction Branchement du MOMiteur.....s..ssscssssecssssescrssrsacenesssssvsensesesenses Nomenciature et Fonctions Fonctions du Paneau de Commande Rglage des Commandes Affichage Ecran Options de slection et de Rglage OSD (affichage cran) Mise en Mmoire de Modes Vid60 .......s+-ssssssssessesssssssssesssansnsesssensesescesnnensccennnsnsscennannsssscseasanseseqegnssnes Quelques Conseils en Cas Dincident Spcifications D'entree ...cssecessessressesntensensenseatenennenneneenneanentenesnentaansnetersaet ene e eee Introduccin Conectando del MOnitor.......c.sssssesscssssscssssssssneccsssnececssanescasonvesssnnsssenveseccannscsenssscososneses Ubicacion y Funcion de los Controles Funcin del Panel de Control Ajuste del Control de Exhibici6n en Pantalla (OSD) Ajuste del OSD y Seleccin de Elements ............ Modos de Memoria de Video ..sssssssesscccsssssssssssecssssssssecseseecencensnussoosessensnnsvesssccsconnunsnnanesssccecrssnnuannananaanssonsceeqereetet Sugerencias para Localizar las Fallas Especificaciones s.sssssssessesseseestensssnsesnneaneetesseranennennecneanacenneatentennegeraensieneen eee eee ete ee Introducao Conectando o Monitor Posicao dos Controles e Descricao Funcdes do Painel de Controle .........ss+. Ajuste On Screen Display(OSD) Ajustes OSD e Itens de Selecao Modos de Memria de Video .........sscssssscssssscserseansenssnesentesssssseneasensenssanenensones Resolvendo Problemas t
A Introduction The FLATRON LCD 563LE/LS Flat Panel Monitor has an active matrix TFT (Thin-Film Transistor) LCD (Liquid Crystal Display). This monitor is designed for use in small working areas or for those who need more working space on the desk. Features The FLATRON LCD 563LE/LS is a 15.1-inch (15.1 inches viewable) intelligent micropro-cessor based monitor. Digitally controlled auto-scanning is done with the microprocessor for horizontal scan frequencies between 31 and 61kHz, and vertical scan frequencies between 56 and 75Hz. The microprocessor-based digital controls allow you to adjust conveniently a variety of image controls by using the OSD (On Screen Display).
|t supports resolutions up to 1024x768, and has a wide viewing angle of +60 degrees horizontal and +45 degrees vertical. s The monitor is shipped with 14 factory pre-programmed video modes that are permanently resident. In addition, there are 16 user-storable modes, for a total of 30 memory modes. Plug and play capability if supported by your system. a This monitor has DDC 2B function.*
Compliant with the following regulated specifications :*
-EPA Enercy STAR
- Swedish TCO'99
*For detailed information, please refer to the Reference Guide provided . ENGLISH Connecting the Monitor On the back of the monitor are two plug-in connections; one for the AC power cord, and the other for the signal cable from the video card.
@ Power off both the monitor and PC.
@ Connect the 15 pin VGA connector of the supplied signal cable to the output VGA video connector on the PC and the matching input connector on the rear of the monitor. The connectors will mate only one way. if you cannot attach the cable easily, turn the connector upside down and try again. When mated, tighten the thumbscrews to secure the connection.
@ Locate the appropriate MAC to VGA adapter block at your local computer store. This adapter changes the high density 3 row 15 pin VGA connector to MAC. Attach the other the correct 15 pin 2 row connection to mate with your end of the signal cable to the side of the adapter block with 3 rows. Connect the attached adapter block/signal cable to the video output on your MAC. Connect the plug from the AC-DC adapter into the connector on the display unit. @ Connect one end of the AC power cord into the AC-DC adapter.O Plug the other end into a properly grounded three-prong AC outlet.
@ Power on the PC, then the monitor.
@ If you see the NO SIGNAL message, check the signal cable and connectors.
@ After using the system, power off the monitor, then the PC. MACINTOSH IBM PC e@ ul 40 Location and Function of Controls
; Front View !
i i r |
i
\ , I
- Power Indicator
- Power Button AUTO/SET Button Rear View ID Label D-Sub Signal Connecter DC Power Connecter O-C-O Contro! Panel Function Front Panel Controls vVA/<4> Buttons OSD Button Oso scam OSD Button Power Button Use this button to enter and from the on screen display (OSD). Vv a va/<4> Buttons
= Power (DPMS) Indicator Power Button Use these buttons to choose or adjust items in the on screen display.
<Shortcut Keys>
* Brightness and Contrast can be adjusted directly without entering the On Screen Display (OSD) system. Touch the V/4/<4/ buttons to adjust the settings and then the OSD button to save all changes. The Brightness and Contrast functions are also available in the On Screen Display (OSD) menu. Use this button to enter a selection in the on screen display.
* AUTO adjustment function Touch the AUTO/SET button before using OSD menu. This button is for the automatic adjustment of the screen position, clock and phase. Note: Some signal from some graphics boards may not function property. If the results are unsatisfactory, adjust your monitor's Position, Clock and Phase manually. This indicator lights up green when the monitor operates normally. If the monitor is in DPM (Energy Saving) mode (stand-by/
suspend/power off), this indicator color changes to amber. Use this button to turn the monitor on or off.
i 2 1 obi pect.
| position and operating parameters of the monitor are quick and easy with the On Screen Display Control system. A quick example is given below to familiarize you with the use of the controls. Following section is an outline of the available adjustments and selections you can make using the OSD. I Press the OSD Button, then the main menu of the OSD appears. 2 To access a control, use the Wa Buttons. When the icon you want becomes highlighted, press the AUTO/SET Button. 8 Use the va/<4> Buttons to adjust the item to the desired level. Al Accept the changes by pressing the AUTO/SET Button. 5 Exit the OSD by Pressing the OSD Button. On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selection and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the items that are shown on the Menu. OSD Adjust BTecra aT ee See ae @ GO Brightness _ Used to adjust the brightness of the eae screen.
| Oo Oo Contrast Adjust the display to the contrast desired. PRESET 9300K/ 6500K To appear the displays color temperature.
* 9300K:Slightly bluish white. 6500K:Slightly reddish white. i ir nl Mise nite RED To set your own color levels. Set nea BMG GREEN To set your own color levels. BLUE To set your own color levels. re] [Cal] Vertical Position To move image up and down. f*]| [ff] Horizontal Position To move picture image left and right. On Screen Display(OSD) Selection and Adjustment OSD Adjust Blaveg) ice To minimize any vertical bars or stripes visible on the screen background.The horizontal screen size will also change. To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. LANGUAGE To choose the language in which the control names are displayed.
| OSD POSTION To adjust position of the OSD window on the screen. ELAPSED TIME To display the use time of monitor Oe Video Memory Modes The monitor has 30 memory locations for display modes, 14 of which are factory preset to popular video modes. Display Modes (Resolution) Display Modes (Resolution) Horizontal Freq.(kHz) Vertical Freq.(Hz) ANOahWND =
co 10 11 12 13 14 a Note : This LCD monitor has been pre-adjusted to the video mode of User Modes VGA VGA VGA MAC VESA VESA VESA VESA VESA VESA MAC VESA VESA VESA 640 x 350 720 x 400 640 x 480 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1024 x 768 VESA 1024x768 @75Hz. 31.47 31.47 31.47 35.00 37.86 37.50 35.16 37.88 48.08 46.88 49.72 48.36 56.48 60.02 70 70 60 67 73 75 56 60 72 75 75 60 70 75 Modes 15-30 are empty and can accept new video data. If the monitor detects a new video mode that has not been present before or is not one of the preset modes, it stores the new mode automatically in one of the empty modes starting with mode 15. If you use up the 16 blank modes and still have more new video modes, the monitor replaces the information in the user modes starting with mode 15. Troubleshooting Check the following before calling for service. Display Position is incorrect.
= Push the AUTO/SET Button.
= |f the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display. On the screen background, vertical bars or stripes are visible.
= Push the AUTO/SET Button.
= |f the results are unsatisfactory, decrease the vertical bars or stripes using the CLOCK icon in the on screen display. Any horizontal noise appearing in any image or characters are not clearly portraid.
= Push the AUTO/SET Button.
= If the results are unsatisfactory, decrease the horizontal bars using the PHASE icon in the on screen display. NO SIGNAL message.
= The signal cable is not connected, or is loose. Check and secure the connection. OUT OF RANGE message appears. Picture is blank. a The frequency of the signal from the video card is outside the operating range of the monitor. Horizontal Frequency: 31kHz-61kHz Vertical Frequency: 56Hz-75Hz
* Use the graphics board's utility software to change the frequency setting (Refer to the manual for graphics board).
*You can change the setup to the supported resolution using the Safe Mode (Press the F8 key during booting the system). The power LED is illuminated amber.
= The monitor is in its display power management mode.
= There is no active signal coming from the PC.
= The signal cable is not fastened securely. m Check the computer power and graphics adapter configuration. The monitor doesn't enter the power saving off mode (Amber).
= Computer video signal is not VESA DPMS standard. Either the PC or the video controller card is not using the VESA DPMS power management function. Specifications Display Type 15.1inch (38.35cm) Flat Panel Active matrix-TFT LCD, Anti-Glare coating Viewable Size 15.1inch (38.35cm) Pixel pitch 0.3 x 0.3mm True color FLATRON LCD 563LE : 16,7 million color FLATRON LCD 563LS : 262,144 color Syncipput . __ Horizontal Freq. 31 - 61kHz (Automatic) of * "Vertical Freq. 56 - 75Hz (Automatic) 3. es Input Form Separate TTL, Positive/Negative Sis 240156769 Signal Input 15 pin D-Sub Connector Video Input Display Area 307 x 230mm / 12.1 x 9.1inch _ Input Form Separate, RGB Analog, 0.714Vp-p/75ohm, Positive Resolution VESA 1024 x 768/ 75Hz max
~ Stand-by/Suspend Power Off 38.92 cm / 15.95 inches 36.16 cm / 14.24 inches 18.24 cm / 7.18 inches DC 12V 3A 8 Input AC 100-240V 50-60Hz 1.2A~0.6A
| Output DC 12Vt5A O-C-O Net 4.8 kg (10.58 Ibs) Down 5 |
Up 30 ene he AIM koh enc Operating Condition Temperature 10C to 35C Humidity 10 % to 80 % non-Condensing Storage Condition |
Temperature -20C to60C Humidity 5 % to 95 % non-Condensing