MCSLOGIC PRODUCT APPROVAL DATASHEET MCSLogic Class 2 Bluetooth Module PRODUCT MODEL NAME MB0502LX LG P/N CUSTOMER LG Electronics Checked By Approved By Company Seal MCSLOGIC Product Approval Datasheet V0.1 1/12 Copyright 2012 MCS LOGIC Limited. All rights reserved Confidential MCSLOGIC Revision History Version Date 12/10/26 0.1 Revision Description Initial release Product Approval Datasheet V0.1 2/12 Copyright 2012 MCS LOGIC Limited. All rights reserved Confidential MCSLOGIC Table of Contents 1. INTRODUCTION ........................................................................................................................................................... 4 2. GENERAL FEATURES ................................................................................................................................................. 4 2.1 MODULE FEATURES .................................................................................................................................................. 4 2.2 FIRMWARE FEATURES ............................................................................................................................................. 5 3. MECHANICAL DIMENSION ...................................................................................................................................... 6 4. ELECTRICAL CHARACTERISTICS ......................................................................................................................... 7 5. PIN CONFIGURATION .............................................................................................................................................. 10 6. MB0502LX CONTROL METHOD............................................................................................................................. 11 7. APPROVAL STATEMENTS ...................................................................................................................................... 12 Product Approval Datasheet V0.1 3/12 Copyright 2012 MCS LOGIC Limited. All rights reserved Confidential MCSLOGIC 1. Introduction MB0502LX is a fully integrated Bluetooth module. It is based on CSRs Bluecore5-Multimedia External with specific interface design to meet LG Electronicss needs. MB0502LX is compatible with Bluetooth specification version 3.0. It integrates RF, Baseband controller, etc., a completed Bluetooth subsystem. MB0502LX supports A2DP Sink, AVRCP Controller&Target, HFP, SPP profiles. It provides a UART interface, analog/I2S/SPDIF audio output and functional GPIO. MB0502LX can control by UART. Please refer to MB0502LX software user guide for the interfacing protocol. 2. General Features 2.1 Module Features
- Operation Range (Class II) : 10 meters
- Operating Temperature Range : -10 ~ 80
- Operating VDD Range : Typical 3.3V(3.0V ~ 3.6V)
- Output Power : 5dBm PK
- Interfaces : UART, Analog Audio Line-in, SPDIF Audio Out, Functional I/O
- Internal Antenna
- Compatible with Bluetooth Specification 3.0
- 64MIPS Kalimba DSP Co-Processor
- 16-bit Internal Stereo CODEC
- RoHS Compliant
- GFSK/8DPSK sf modulation, 79 channel Product Approval Datasheet V0.1 4/12 Copyright 2012 MCS LOGIC Limited. All rights reserved Confidential MCSLOGIC 2.2 Firmware Features
- Bluetooth Stack : UnifiedStack 3.0
- Host Interface : UART
- Support Profile : A2DP (Sink), AVRCP Controller/Target, HFP, SPP
- Profile version : A2DP V1.2, AVRCP1.4, HFP1.6, SPP1.1
- DUT(Device Under Test) Mode Support
- DFU(Device Firmware Upgrade) Support Product Approval Datasheet V0.1 5/12 Copyright 2012 MCS LOGIC Limited. All rights reserved Confidential MCSLOGIC 3. Mechanical Dimension TOP View
(Unit : mm) Dimension 25.000.5 35.001.0 16.500.3 Mark A B C Mark D E F Dimension 12.000.3 0.500.15 2.000.3 Mark G H I Dimension 3.000.3 10.000.5 7.000.5 Mark J K L Dimension 4.300.3 4.000.3 2.500.3 Mark M N Dimension 3.400.3 1.000.3. Product Approval Datasheet V0.1 6/12 Copyright 2012 MCS LOGIC Limited. All rights reserved Confidential MCSLOGIC 4. Electrical Characteristics Current consumption Parameter Page Scan Inquiry and Page Scan SCO Connection HV1 SCO Connection HV3 ACL No data transfer ACL data transfer Input/Output Characteristics Parameter Digital (UART, PIO) VIL Input Voltage Low VIH Input Voltage High VOL Output Voltage Low VOH Output Voltage High General Performance Parameter Frequency Range Impedance at Antenna Condition Master Master Master Master Avg 3.9 5 40 28 5 30 Peak
10
Unit mA mA mA mA mA mA Min
-0.4V 2.3V
3.1V Max 0.8V 3.6V 0.2V
Unit V V V V Condition Min 2402 Type Max Unit 2480 MHz Ohm 50 Product Approval Datasheet V0.1 7/12 Copyright 2012 MCS LOGIC Limited. All rights reserved Confidential MCSLOGIC Transmitter Performance Parameter Transmit Power Power density 20dB bandwidth Adjacent channel power Out-band Spurious Emission Modulation Characteristic Initial Carrier Frequency Tolerance Carrier Frequency Drift Condition Peak 2%
3%
4%
30MHz ~ 1GHz 1GHz ~ 12.75GHz 1.8GHz ~ 1.9GHz 5.1GHz ~ 5.3GHz F1avg F2max F2avg / F1avg DH1 packet DH5 packet Min 3
140 115 80
-40
-25 Type Max Unit dBm 7 20 dBm 1000 KHz dBm
-20
-40 dBm dBm
-40 dBm
-36
-30 dBm dBm
-47
-47 dBm KHz 175
KHz
5
40 25 KHz KHz Product Approval Datasheet V0.1 8/12 Copyright 2012 MCS LOGIC Limited. All rights reserved Confidential MCSLOGIC Receiver Performance Type Max Unit dBm dBm dB dB dB dB dB dB c dBm dBm dBm dBm
11 0
-20
-40
-9
-20
-5
dBm Condition Single slot (DH1 packet) Multi slot (DH5 packet) C/Ico-channel, Input = -60dBm C/I1MHz, Input = -60dBm C/I2MHz, Input = -60dBm C/I3Mhz, Input = -67dBm Image radio, Input = -67dBm Image1, Input = -67dBm 30MHz ~ 2000MHz 2000MHz ~ 2400MHz 2500MHz ~ 3000MHz 3000MHz ~ 12.75GHz Input=-64dBm, n=5 Single slot (DH1 packet) Min
-70
-70 0
-10
-27
-27
-10
-39
-20 Parameter Sensitivity level (BER0.1%) Sensitivity level (BER0.1%) C/I performance (BER0.1%) Out-of-band Blocking
(BER0.1%) Intermodulation (BER0.1%) Maximum Input Level
(BER0.1%) Product Approval Datasheet V0.1 9/12 Copyright 2012 MCS LOGIC Limited. All rights reserved Confidential MCSLOGIC 5. Pin Configuration Symbol I O P1 Description CMOS input Output supply voltage VDD_P1 Pin Name Description DIGITAL Ground I2S_SCK I2S_SD_OUT I2S_SD_IN I2S_WS Pin descriptions for the MB0502LX Module I/O NO DIGITAL Ground 1 GND I System Reset(Low Active) I 2 NRESET 3 UART_RX UART Data Input active high I O UART Data Output active high 4 UART_TX I 5 GND O General Purpose I/O 6 MUTE 7 O Bit clock O Data output 8 I/O Data input 9 10 O LR clock I 11 GND DIGITAL Ground O Analog audio positive left 12 AOUT_P_L 13 AOUT_N_L O Analog audio negative left O Analog audio positive right 14 AOUT_P_R O Analog audio negative right 15 AOUT_N_R 16 GND I 17 N/C 18 N/C I 19 GND 20 VDD I I/O NO 1 N/C Not Connected. O Microphone bias 2 MIC BIAS 3 MIC INPUT I I 4 AGND Volt P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 P1 Volt P1 P1 P1 P1 DIGITAL Ground Not Connected. Not Connected. DIGITAL Ground VCC 3.3V Analog audio input Analog Ground Description Pin Name Product Approval Datasheet V0.1 10/12 Copyright 2012 MCS LOGIC Limited. All rights reserved Confidential MCSLOGIC 6. MB0502LX Control Method 1) There is UART Protocol document between Host MCU and BT Module. So you can use command/response via UART. 2) RF Test Utility First time, CSR Bluesuite program must be installed. you can use BTCli.exe and enter DUT(Device Under Test) mode. So RF equipment can inquiry and test. (reference document.)
*reference document : MB0502LX_DUT_Manual.pdf RF Test tool is BlueTest.exe at CSR bluesuite program. You can see detail explanation from reference document.
* reference document : BlueTest Instruction Manual.pdf 3) RF Test method Product Approval Datasheet V0.1 11/12 Copyright 2012 MCS LOGIC Limited. All rights reserved Confidential MCSLOGIC 7. Approval Statements This device complies with Part 15 of the FCC`s Rules. Operation is subject to the following two Conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesirable operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is Increase the separation between the equipment and receiver. connected.
- Consult the dealer or an experienced radio/ TV technician for help. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and must not be co-located or operating in conjunction with any other antenna or transmitter. This device is intended only for OEM integrators under the following conditions:
1) This module may not be co-located with any other transmitters or antennas. 2) The antenna used with this module must be installed to provide a separation distance of at least 20cm from all persons. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements with this module installed. In the event that these conditions cannot be met, then the FCC authorizations are no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product including this module and obtaining separate FCC authorizations. Any changed or modifications not expressly approved by the party responsible for compliance could void the user`s authority to operate this equipment. To satisfy FCC exterior labeling requirements, the following text must be placed on the exterior of the end product. Contains Transmitter module FCC ID: BEJ9QK-DMMB0502LX Product Approval Datasheet V0.1 12/12 Copyright 2012 MCS LOGIC Limited. All rights reserved Confidential