19-1, Cheongho-ri Jinwi-myeon, Pyeongtaek-si,Gyeonggi-do, 451-713, Korea MB8811C0 Bluetooth Adapter Card User Guide Version 1.1 July, 2013 19-1, Cheongho-ri Jinwi-myeon, Pyeongtaek-si,Gyeonggi-do, 451-713, Korea Revision History Release Date Revision 1.1 2013-07-11 First release. Initials 19-1, Cheongho-ri Jinwi-myeon, Pyeongtaek-si,Gyeonggi-do, 451-713, Korea STATEMENT and Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. IC This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. French:
Cet appareil radio est conforme au CNR-210 dIndustrie Canada. Lutilisation de ce dispositif est autorise seulement aux deux conditions suivantes : (1) il ne doit pas produire de brouillage, et (2) lutilisateur du dispositif doit tre prt accepter tout brouillage radiolectrique reu, mme si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. 19-1, Cheongho-ri Jinwi-myeon, Pyeongtaek-si,Gyeonggi-do, 451-713, Korea NCC NCC:XXXXXXXXXXX This device is intended only for OEM integrators under the following conditions:
The antenna must be installed such that 20 cm is maintained between the antenna and users, and The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate FCC authorization. 19-1, Cheongho-ri Jinwi-myeon, Pyeongtaek-si,Gyeonggi-do, 451-713, Korea End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains FCC ID: BEJ9QK-DMMB8811C0, contains IC: 2703H-DMMB8811C0. The grantee's FCC ID can be used only when all FCC/ IC compliance requirements are met. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. CE Hereby declares that this WiFi module is in compliance with the essential requirements and other relevant provisions of R&TTE Directive 1999/5/EC. The standards for complying are as following:
ETSI EN 301 489-1 V1.9.2: 2011-09 ETSI EN 301 489-17 V2.2.1: 2012-09 ETSI EN 300 328 V1.8.1:2012-06 EN 62311: 2008 EN 60950-1: 2006 +A11:2009 This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. This device is intended for home and office use in all EU countries CONTENTS Package Contents .................................................................................................... 7 Chapter 1Introduction ............................................................................................. 8 1.1 Overview of the Product ............................................................................................ 8 1.2 Features ..................................................................................................................... 8 Chapter 2Installation Guide (For Consumer Electronics) ................................... 9 2.1 Hardware Installation ................................................................................................. 9 2.2 Software Installation .................................................................................................. 9 Appendix A: Specifications ................................................................................... 12 Package Contents MB8811C0 Bluetooth Adapter Card The following items should be found in your package:
MB8811C0 Bluetooth Adapter Card Conventions:
The Module mentioned in this user guide stands for MB8811C0 Bluetooth Adapter Card without any explanation. 7 MB8811C0 Bluetooth Adapter Card Chapter 1 Introduction Thank you for choosing the MB8811C0 Bluetooth Adapter Card!
1.1 Overview of the Product MB8811C0 is a fully integrated Bluetooth module. It is based on CSRs Bluecore 8811 chip with specific interface design to meet LG Electronicss needs. MB8811C0 is compatible with Bluetooth specification version 4.0. It integrates RF, Baseband controller, etc., a completed Bluetooth subsystem. 1.2 Features Operation Range (Class II) : 10 meters Fully Compatible with Bluetooth Specification 4.0 Dual-mode Bluetooth / Bluetooth low energy Operating Temperature Range : -10 ~ 70 Operating VDD Range : 3.0 V- 3.6 V Normal: 3.3 V Interface : UART Internal Antenna RoHS Compliant 8 Chapter 2 Linux Installation Guide (For Consumer Electronics) MB8811C0 Bluetooth Adapter Card 2.1 Hardware Installation For the Consumer Electronics products which use MB8811C0, it must provide a corresponding connector for the module. After connecting the module to the device, the hardware installation is finished. 2.2 Software Installation For the Consumer Electronics products, the Linux Driver of MB8811C0 is embedded in default. So the module is a plug and play device. After connecting the module to the device, MB8811C0 will work well. 9 2.3 Pin Definitions MB8811C0 Bluetooth Adapter Card NO. Pin Name I/O Description 1 2 3 4 5 6 7 8 9 10 VDD RESET RTS CTS TXD GND RXD GND SXL SDA I I Positive Input for the internal regulator (3.0 ~ 3.6V) Reset if low. Input debounced so must be low for >5ms to cause a reset Bluetooth UART Clear to Send.Active-low clear. O Bluetooth UART Request to Send. Active-low request. I O Bluetooth UART Serial Output.
- Ground. I
- Ground O I/O I2C interface Clock I2C interface DATA Bluetooth UART Serial Input. 10 2.4 Mechanical Dimension MB8811C0 Bluetooth Adapter Card 11 MB8811C0 Bluetooth Adapter Card Appendix A: Specifications Normal Interface Operating System Radio Data Rate Modulation Frequency Channel Number Spread Spectrum Antenna Safety & Emissions Environmental and Physical Operating Temp. Storage Temp. Humidity UART Windows XP, Vista, 7, Linux Up to 3Mpbs GFSK, /4 DQPSK, 8DPSK 2.402 ~ 2.480GHz 11 for BLE, 79 for BT4.0 FHSS/ DSSS for BLE Integrated, PIFA FCC/ IC/ NCC, CE, Japan
-40~ 85
-10~ 70 10% ~ 90% RH, Non-condensing 12 MB8811C0 Bluetooth Adapter Card 13