SIMPLE MANUAL Portable Bluetooth Speaker MODELS PL2/PL2W MFL71463103 PP_2003_Rev02 Controller App Android www.lg.com Copyright 2020 LG Electronics Inc. All Rights Reserved. ENGLISH Fully Charged: Off Charging: On Blinking Power LED indicates the battery needs to be charged. AC Adapter
(Not supplied) Power Bluetooth Playback Controls Power On / Off . Press 1 To pair your mobile device, select LG-PL2(XX) from device list.
(Bluetooth LED: Blink ON) Ready to pair another device . Hold Play / Pause . Press Forward Skip . Press Backward Skip . Press for 2 seconds X 2 X 3 3 Handsfree Volume Voice Command Sound effect Receive / Disconnect . Press Volume Control . Press or Use voice command of your smart device
. Hold
(Off): Standard/ (On): SOUND BOOST
. Press SOUND BOOST. for 2 seconds Dual Mode Press each speakers DUAL button. Multi phone pairing Dual Mode 4 Specification Power Supply:
- 5 V 0 2 A (AC Adapter)
- Built-in rechargeable battery Power consumption: Refer to the main label. Dimensions (W x H x D):
- Approx. 126 mm X 82 mm X 80 mm Operating Temperature: 5 C to 35 C Operating Humidity: 5 % to 60 %
Water-proof: IPX5
- Degree of protection against jets of water. Battery Life: Approx. 10 hours
(Varies by volume level and audio content.) y Design and specifications are subject to change without notice. Important Notice y Fully charge the device before using for the first time. y It is recommended that you use the 5 V AC adapter (more than 2 A) with this unit y To enjoy more features, download the "LG XBOOM" App to your Bluetooth device.
(Only Android) y Resetting If have a malfunction with the speaker, press the RESET button. For more information, download the online owners manual. http://www.lg.com 5 Declaration of Conformity Hereby, LG Electronics declares that the radio equipment type Portable Bluetooth Speaker is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
http://www.lg.com/global/support/cedoc/
cedoc#
Frequency range Output power
(Max.) 2402 to 2480 MHz 10 dBm 6 FCC Information This device complies with part 15 of the FCC Results. Operation is subject to the following two conditions :
(1) This Device may not cause harmful interface, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:
1.1. Reorient or relocate the receiving antenna. 1.2. Increase the separation between the equipment and receiver. 1.3. Connect the equipment into an outlet on a circuit different from that to which receiver is connected. 1.4. Consult the dealer or experienced radio/TV technician for help. WARNING Changes or modifications not expressly approved by the manufacturer could void the users authority to operate the equipment. CAUTION : Exposure to Radio Frequency Radiation. Antenna shall be mounted in such a manner to minimize the potential for human contact during normal operation. The antenna should not be contacted during operation to avoid the possibility of exceeding the FCC radio frequency exposure limit.
"ATTENTION: L'exposition aux rayonnements frquence radiolectrique. Antenne doit tre monte de telle manire minimiser le risque de contact humain pendant l'utilisation normale. L'antenne ne doit pas tre contact pendant le fonctionnement pour viter la possibilit de dpasser la limite de l'exposition aux frquences radio de la FCC. IC Information This device complies with Industry Canada license-exempt RSS standard(s). Operation in subject to The following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:
1) lappareil ne doit pas produire de brouillage;
2) lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body Cet quipement doit tre install et utilis une distance minimale de 20cm entre le radiateur et votre corps.