| all | frequencies |
|
exhibits | applications |
|---|---|---|---|---|
| manual |
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 |
|
User manual | Users Manual | 1.33 MiB | ||||
| 1 | Cover Letter(s) | |||||||
| 1 | Attestation Statements | |||||||
| 1 | External Photos | |||||||
| 1 | Internal Photos | |||||||
| 1 | ID Label/Location Info | |||||||
| 1 | RF Exposure Info | |||||||
| 1 | Cover Letter(s) | |||||||
| 1 | Test Report | |||||||
| 1 | Test Setup Photos |
| 1 | User manual | Users Manual | 1.33 MiB |
E N G L I S H D E U T S C H F R A N A S I E S P A O L I T A L I A N O N E D E R L A N D S S L O V E N N A I OWNERS MANUAL CAR CD/MP3/WMA Receiver Please read this manual carefully before operating your set and retain it for future reference. LCS710BR / LCS710DAB /
LCF810BR / LCF810DAB P/NO : MFL63287368 1 G e t t i n g S t a r t e d 2 Getting Started Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in a confined space such as a book case or similar unit. Always operate the vehicle in a safe manner. Do not become distracted by the vehicle while driving, and always be fully aware of all driving condition. Do not change settings, or any functions. Pull over in a safe and legal manner before attempting such operations. Do not use for many hours at extremely low or high temperature.
(-10 C to 60 C) To reduce the risk of electric shock, do not remove the cover or back of this product. There are no user-serviceable parts inside. Refer servicing to qualified service personnel. To reduce the risk of fire or electric shock, do not expose this product to dripping or splashing water, rain, or moisture. The temperature of units outside can be extremely high, please use the unit after proper installation in your vehicle. This unit cannot play 8 cm disc (use 12 cm disc only). While driving, keep the sound volume at a proper level. Do not drop it and avoid heavy impacts at anytime. This unit is for vehicles with a 12-volt battery and negative grounding. Before installing it in a recreational vehicle, lorry or bus, check the battery voltage. To avoid shorts in the electrical system, be sure to disconnect the E battery cable before beginning the installation. Getting Started 3 Disposal of your old appliance 1 G e t t i n g S t a r t e d 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2. All electrical and electronic products shall be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 4. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product. LG Electronics hereby declares that this/
these product(s) is/are in compliance with the essential requirements and other relevant provisions of Directive 2006/95/EC and ECE Regulation 10.03
(3.2.9). European representative :
LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere, The Netherlands
(Tel : +31-(0)36-547-8888) The unit is compatible with the steering wheel remote control. The function allows operation by sending the steering wheel remote control signal to the unit. For details, consult with your dealer. CAUTION: This product employs a Laser System. To ensure proper use of this product, please read this owners manual carefully and retain it for future reference. Shall the unit require maintenance, contact an authorized service centre. Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. This device is equipped with a portable battery or accumulator. Safe way to remove the battery or the battery from the equipment:
Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do not dispose of batteries or battery together with other waste. It is recommended that you use local, free reimbursement systems batteries and accumulators. The battery shall not be exposed to excessive heat such as sunshine, fire or the like. You have to set the disc format option to [Mastered]
in order to make the discs compatible with the LG players when formatting rewritable discs. When setting the option to Live File System, you cannot use it on LG players.
(Mastered/Live File System : Disc format system for Windows Vista)
> Caution When being connected in a wrong way, the unit displays as follows.
- Antenna port short : "EXTERNAL ON PORT SHORT CIRCUIT CHECK"
After connecting it again, restart the unit. 1 2 3 4 5 4 Table of Contents Table of Contents 1 Getting Started 2 5 6 7 7 Safety Information Front panel [LCS710BR / LCS710DAB]
Front panel [LCF810BR / LCF810DAB]
Remote control Battery Installation 16 16 17 17 17 18 19 2 Connecting 8 8 8 9 About detachable control panel
[LCS710BR / LCS710DAB]
Attaching the control panel Detaching the control panel About detachable control panel
[LCF810BR / LCF810DAB]
Attaching the control panel Detaching the control panel Installation 9 9 10 10 Basic Installation 10 Removing the existing receiver unit 10 ISO-DIN Installation 11 11 Connection Connecting to a car 3 Operating 12 Operation 12 12 12 12 12 12 13 14 14 14 Basic operations Turning off the sound temporarily Using EQ (Equalizer) Checking the clock Turning off the display light Resetting the unit Adjusting the general settings Listening to a CD Pausing or restarting CD playback Searching for a section within a track
/ le Skipping to another track/ le Checking information about your music Playing back tracks / les in a way you 15 15 15 want Listening to music from an external device Preventing radical changes in volume as switching sources Listening to the TUNER Storing desired frequencies manually Listening to a preset station Adjusting TUNER settings Listening to the DAB (Only LCS710DAB /
LCF810DAB) Storing desired frequencies manually Listening to a preset station 19 19 20 Adjusting DAB settings 21 Using an USB device / SD card 21 21 21 Moving to another drive Quick Search of a desired le Playable USB device / SD card Requirement Recording to USB device / SD card 21 22 Listening to music by connecting iPod /
iPhone 22 Pausing or restarting playback 22 Searching for a section within a track
/ le 22 Checking information about your music 23 Playing back tracks / les in a way you want 23 Playing back les by music menus 23 Two way Control 23 Compatible iPod models 24 Connecting a Bluetooth wireless technology 25 Using the buttons for Bluetooth wireless technology 25 Using a Bluetooth wireless technology 27 Adjusting the setting 28 Phone compatibility list 4 Troubleshooting 31 Troubleshooting 5 Appendix 32 Specications Getting Started 5 Front panel [LCS710BR / LCS710DAB]
a b c d e f g h i
[Front unit detached panel]
1 G e t t i n g S t a r t e d j k l m n o p q s r t u v a b c B Ejects a disc.
- When pressed, selects function sources.
- When pressed and held, powers unit on or off. N Plays and pauses playback. k
- Activates BT function.
- Answers a call. l Returns to the previous step. Ends a call. d Temporarily stops the sound. Volume knob
F In each mode, sets playback items. e
f Activates setting menu. BAND
- Selects a band in Tuner mode.
- Moves to a next USB drive.
- Searches stations that have TA / TP information, when it is pressed and held.
- Activates Two way Control. Remote Sensor Display window 6 Opens the front panel. R Recording to USB / SD card. g h i j m n o p q r s t A / D Skip / Search / Seek / Tune EQ Improves sound quality.
- When pressed, selects the EQ function.
- Press it, you can check the clock time.
- Press and hold it, you can turn on /off the display window and the light of LED buttons. INT Intro scan.
Repeats playback.
Shuffles playback. Numeric buttons (1 to 6) Selects a numbered preset station in TUNER. AUX If connected to other portable player, you can enjoy music from it on the unit. USB port SD card slot u v 6 Getting Started Front panel [LCF810BR / LCF810DAB]
a f g b c h d e
[Front unit detached panel]
1 G e t t i n g S t a r t e d i j l k o m n p q j
- Activates BT function.
- Answers a call. k Returns to the previous step. Ends a call. l m n o A / D Skip / Search / Seek / Tune EQ Improves sound quality.
- When pressed, selects the EQ function.
- Press it, you can check the clock time.
- Press and hold it, you can turn on /off the display window and the light of LED buttons. AUX If connected to other portable player, you can enjoy music from it on the unit. USB port SD card slot p q a b
- When pressed, selects function sources.
- When pressed and held, powers unit on or off. N Plays and pauses playback. c Temporarily stops the sound. Volume knob
- Adjusts volume level.
- Confirms the settings.
- Checks tracks, files or preset stations. F In each mode, sets playback items. d
e Activates setting menu. BAND
- Selects a band in Tuner mode.
- Moves to a next USB drive.
- Searches stations that have TA / TP information, when it is pressed and held.
- Activates Two way Control. Display window Remote Sensor
Opens the front panel. R Recording to USB / SD card. f g h i 1 G e t t i n g S t a r t e d Getting Started 7 i j k l
display window and the light of LED buttons.
Repeats playback. INT Intro scan. Numeric buttons (1 to 6) Selects a numbered preset station in TUNER. Battery Installation 1. Pull out the battery holder with a sharp product like a ball point pen. 2. Put the battery with battery holder. and correctly on the 3. Push the battery holder back into its original position.
, Note y Use only one CR2025 (3 V) lithium battery. y Remove the battery if the remote control is not used for a long period of time. y Do not leave the product in a hot or humid place. y Do not handle the battery with metallic tools. y Do not store the battery with metallic materials. Remote control a b c d e f g h
When pressed, sets playback items in each mode.
When pressed and held, activates setting menu. BAND Selects a band in Tuner mode. DRV Moves to a next USB drive. d/M Plays or pauses playback.
Shuffles playback.
Temporarily stops the sound.
W / S Adjusts volume level. c / v Skip / Search / Seek / Tune Returns to the previous step. w / s
forward if there is no folder or one folder on a CD.
are more than 2 folders on a CD. ENTER / LIST
8 Connecting About detachable control panel
[LCS710BR /
LCS710DAB]
Detaching the control panel 1. Press the 6 to open the control panel. Attaching the control panel 2. Push the control panel to right. 2 C o n n e c t i n g 3. Pull the control panel out of the unit. 4. Put the detached control panel into the protective case. Control panel Protective Case
, Note Periodically wipe the contacts on the back of the control panel with a cotton swap moistened with alcohol. For safety, turn off the ignition before cleaning, and remove the key from the ignition switch. 1. Align the left side of the panel with the stopper. 2. Push the right side of panel into the unit until it clicks.
> Caution y The control buttons may not work properly if the control panel is not attached properly. If this occurs, gently press the display. y Do not leave the control panel in any area exposed to high temperatures or direct sunlight. y Do not drop the control panel or otherwise subject it to strong impact. y Do not allow such volatile agents as benzine, thinner, or insecticides to come into contact with the surface of the control panel. Connecting 9 Detaching the control panel 1. Press the OPEN to open the control panel. About detachable control panel
[LCF810BR /
LCF810DAB]
Attaching the control panel 1. Attach part CA of the control panel to part CB of the unit. 2. Push the control panel to left. 2 C o n n e c t i n g
2. Attach part C of the control panel to part D of the unit while pushing the control panel to left. 3. Close the control panel. 3. Pull the control panel out of the unit. 4. Put the detached control panel into the protective case. Control panel Protective Case
, Note Periodically wipe the contacts on the back of the control panel with a cotton swap moistened with alcohol. For safety, turn off the ignition before cleaning, and remove the key from the ignition switch.
> Caution y The control buttons may not work properly if the control panel is not attached properly. If this occurs, gently press the display. y Do not leave the control panel in any area exposed to high temperatures or direct sunlight. y Do not drop the control panel or otherwise subject it to strong impact. y Do not allow such volatile agents as benzine, thinner, or insecticides to come into contact with the surface of the control panel. 10 Connecting Installation Basic Installation Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery to avoid short-circuiting. ISO-DIN Installation Control panel 1. Slide the unit into the ISO-DIN frame. 2. Fit screws removed from the old unit. 3. Slide the unit and frame into the dash opening. 4. Install the dash panel or adapter plate.
(According to models, this step may not be needed.) Install the trim ring to the unit. Install the control panel to the unit. 2 C o n n e c t i n g Bend the claws according to the thickness of the dashboard. Control panel 1. Remove the existing receiver unit. 2. Make the necessary connections. 3. 4. Install the installation sleeve. Install the unit into the installation sleeve. 5. 6. Removing the existing receiver unit If there is already an installation sleeve for the receiver unit in the dashboard, it must be removed. 1. Remove the rear support from the unit. 2. Remove the control panel and trim ring from 3. the unit. Insert the lever into the hole on one side of the unit. Perform the same operation on the other side and pull the unit out from the mounting sleeve. Connecting 11 Connection Connecting to a car Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery to avoid short-circuiting. Wired remote input (Black): Hard-wired control adapter can be connected.
(Optional / Not supplied) To Audio out To Audio in Sub-woofer Left Sub-woofer Right Front Left Front Right Rear Left Rear Right Sub-woofer 2 C o n n e c t i n g a b c d e f g h a b c d e f g h B f Power Antenna (Blue) B g Dimmer (Pink) B c To Ignition (Red) B d To Battery (+) (Yellow) B h Ground (-) (Black) Amplifier SMB type of DAB Antenna can be connected.
(Only LCS710DAB / LCF810DAB) Power Antenna Control Relay Dimmer Switch Ignition Switch A A A A A A A A a b c d e f g h B e Remote On
(Blue / White) Amplifier B b Phone Mute
(Orange) B a Not connected A a Gray : Front Right +
A b Gray / Black Stripe: Front Right -
A c Violet : Rear Right +
A d Violet / Black Stripe: Rear Right -
A e White : Front Left +
A f White / Black Stripe: Front Left -
A g Green : Rear Left +
A h Green / Black Stripe: Rear Left -
Checking the clock 1. Press DISP to check the clock. 2. Press it again to remove it. Turning off the display light 1. Press and hold DISP. 2. Press and hold it again to turn it on.
, Note Under the light-off condition, press any key, the light is turned on and then off automatically if you don't press it within a few seconds. Resetting the unit You can reset the unit when it does not operate properly. 1. Detach the control panel. Refer to page 8 to 9 for detaching the control panel. 2. Press the RESET hole with a sharp object.
[LCS710BR / LCS710DAB] [LCF810BR / LCF810DAB]
12 Operating Operation Basic operations 1. Turn the unit on by pressing any key on the unit. 2. Select a source by pressing SRC. 3. Rotate the volume knob to adjust the volume on the unit. Or press VOLUME W / S on the remote control.
, Note If a source is not connected to the unit, the source is not recognized. Turning off the sound temporarily 1. Press to mute your unit. Or press MUTE on the remote control. 2. To cancel it, press again. Or press MUTE again. 3 O p e r a t i n g Using EQ (Equalizer) EQ is to increase or decrease the signal strength of audio frequencies. The function helps you to enjoy sound more plentifully. Press EQ on the unit. And rotate the volume knob to select the item and press it. The indicator lights up in the following order. FLAT / XDSS+ / POP / CLASSIC / ROCK /
JAZZ / VOCAL / SALSA / SAMBA / REGGAE
/ RUSSY / USER EQ1 / USER EQ2
, Note You can adjust sound level to your preference. Once you select a USER EQ1 / 2 mode and press and hold ` on the unit, then adjust the sound level ((BAS (bass), MID (middle), TRB
(treble), BALANCE (left / right speaker), FADER
(front / rear speaker), SW (Subwoofer), SW-F
(Subwoofer Frequency), A-EQ (Auto EQ)), it will be automatically stored for the currently selected USER EQ1 / 2 mode. Refer to the "For
[SOUND] setting" for USER EQ1 / 2 mode on the page 13. Adjusting the general settings You can adjust [SOUND], [LIGHT] and [OTHER]
settings. On the unit 1. Press and hold `. 2. Rotate the volume knob to select [SOUND],
[LIGHT], or [OTHER] and press it. 3. Rotate the volume knob to select the item and press it. 4. Rotate the volume knob clockwise or counterclockwise to adjust the level. 5. Press the volume knob to confirm the setting. If you want to return to the previous step, press
. On the Remote Control
2. Press w / s to select [SOUND], [LIGHT], or
[OTHER] and press ENTER. 3. Press w / s to select the mode and press ENTER. 4. Press w / s to adjust the level. 5. Press ENTER to confirm the setting. If you want to return to the previous step, press
. Operating 13 For [SOUND] setting You can adjust sound quality by adjusting the level of BALANCE (left / right speaker), FADER (front /
rear speaker), SW (Subwoofer), SW-F (Subwoofer Frequency) and A-EQ (Auto EQ).
- When you set the EQ to USER EQ1 / 2 mode. :
You can adjust the sound level of BAS (bass), MID
(middle), TRB (treble), BALANCE (left / right speaker), FADER (front / rear speaker), SW (Subwoofer), SW-F
(Subwoofer Frequency) and A-EQ (Auto EQ) y SW (Subwoofer) You can adjust the volume of subwoofer. y SW-F (Subwoofer Frequency) You can enable the subwoofer. SW OFF <-> SW 55 Hz <-> SW 85 Hz <-> SW 120 Hz. y A-EQ (Auto EQ) ON / OFF AUTO EQ operates only in the music file supported with genre in the device. When you set AUTO EQ to ON, POP, CLASSIC, ROCK, or JAZZ is automatically selected according to the music genre. For [LIGHT] setting You can adjust the light effects by adjusting LED, DIM, or DIM L. y LED COL1 / COL2 / AUTO : You can change the LED window color. y DIM (Dimmer) OFF / ON / AUTO : You can change the brightness of the display window during the power-on status. Settings DIM ON DIM OFF DIM AUTO Description The display window becomes dark. The display window becomes bright. The dimmer operates according to the car dimmer setting. y DIM L (Dimmer Level) : When you set DIM to ON
/ AUTO, you can adjust the dimmer level. (-2, -1, 0, +1, +2) 3 O p e r a t i n g 14 Operating For [OTHER] setting y AUX (Auxiliary) ON / OFF It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting when using auxiliary equipment connected to this unit. y DEMO OFF / ON You can change the initial indication on the display to information name (function name, EQ name, etc...) while listening to a source. y BEEP 2ND / ALL BEEP 2ND : The beep is generated when a key is pressed for longer than 2 seconds. BEEP ALL : The beep is generated when any key is pressed. y CLK (Clock) For the model RDS is not supported unit or even for a RDS supported unit.
- When RDS CT information is not received and then you set CT to OFF, you can adjust the time by yourelf. Set the clock as follows ;
1. Select a source to TUNER. 2. Press the F to select the CT and then set CT to OFF.
(Refer to the " Adjusting TUNER settings " on the page 18 for setting the CT (Clock Time) ON / OFF.) 3. Press and hold ` on the unit to select
[OTHER] and then select CLK by rotating the volume knob. 4. Set the hour by rotating the volume knob. 5. Press the volume knob to confirm the hour. 6. Set the minute by rotating the volume knob. 7. Press the volume knob to confirm the minute.
- When RDS CT information is received ;
The clock is displayed according to the RDS CT information.
- When RDS is not supported, set the clock according to 3 to 7 steps. 3 O p e r a t i n g Listening to a CD
[LCS710BR / LCS710DAB]
1. 2. Rotate the volume knob on the unit to adjust Insert a CD. the volume. Or press VOLUME W / S on the remote control.
[LCF810BR / LCF810DAB]
1. Press the OPEN to open the control panel. 2. 3. Close the control panel. 4. Rotate the volume knob on the unit to adjust Insert a CD. the volume. Or press VOLUME W / S on the remote control.
, Note Make sure to press B after pressing OPEN to eject a disc. Refer to the picture above. Pausing or restarting CD playback 1. Press N on the unit to pause playback. Or press d/M on the remote control. 2. Press it to resume playback. Searching for a section within a track / le 1. Press and hold A / D on the unit for about 1 second during playback. Or press and hold c / v on remote control. 2. Press N on the unit at the point you want. Or press d/M on the remote control. Operating 15 On the Remote Control 1. Press FUNC MENU. 2. Press w / s to select an item and press it. 3. Press w / s to select the option. 4. Press ENTER to set the option. If you want to return to the previous step, press
. y RPT (Repeat) The current selected tracks / files (1 RPT) or folder
RPT) on the disc is played repeatedly. y SHF (Shuffle) SHF) or all of the tracks / files (SHF) on Each files in the current selected folder
the disc is played randomly. During random playback, even if you press A, you won't go back to the previous track. y INT (Intro Scan) The first 10 seconds of all tracks / files (INT) or each files in the current selected folder (
on the disc are played. y DEV (Device) USB / SD INT) You can change the recording device. USB <-> SD y MODE SPD REC / SPD COPY SPD REC : The recording speed is normal. And during the recording, you can listen to the music being recorded. SPD COPY : The recording speed is twice as fast. And during the recording, you can listen to the TUNER / DAB. But you cannot listen to the music being recorded.
, Note DEV and MODE are only available when the disc is activating. 3 O p e r a t i n g Skipping to another track/ le Press A / D on the unit. Or press c / v on the remote control. Or 1. Press the volume knob on the unit. Or press ENTER on the remote control. 2. Rotate the volume knob on the unit to select a desired ROOT or folder and press it. Or press w / s and press ENTER on the remote control. 3. Rotate the volume knob on the unit to select a desired track / file and press it. Or press w / s and press ENTER on the remote control.
, Note To skip to previous track, press briefly A with-
in 3 seconds of playing time. Checking information about your music MP3 / WMA files often come with tags. The tag gives the Title, Artist or Album. Press DISP repeatedly during MP3 / WMA / CD TEXT file playback. If there is no information, "NO TEXT"
will be shown in the display window. Playing back tracks / les in a way you want For using applicable buttons 1. Press INT / RPT / SHF. 2. Press it again to cancel. Or Using the FUNC button On the unit 1. Press F . 2. Rotate the volume knob to select an item and press it. 3. Rotate the volume knob to select the option. 4. Press the volume knob to set the option. If you want to return to the previous step, press
. 16 Operating
, Note y
: The icon is displayed during MP3 / WMA playback. y unit is limited as follows:
1. Sampling Frequency / 8 kHz to 48 kHz
(MP3) 22.05 kHz to 48 kHz (WMA). 2. Bit rate / within 8 kbps to 320 kbps (include VBR) (MP3) 32 kbps to 320 kbps (WMA). 3. CD-R / CD-RW file system should be "ISO 4. 9660". If you record MP3 / WMA files using software which cannot create a FILE SYSTEM, for example "Direct-CD" etc., it will not be possible to playback MP3 / WMA files. We recommend that you use "Easy-
CD Creator" which creates an ISO 9660 file system. You have to set the disc format option to [Mastered] in order to make the discs compatible with the LG players when formatting rewritable discs. When setting the option to Live File System, you cannot use it on LG players.
(Mastered / Live File System : Disc format system for Windows Vista) Customers should also note that permission is required in order to
the Internet. Our company has no right to
always be sought from the copyright owner. 3 O p e r a t i n g Listening to music from an external device 1. Connect an external device to the AUX jack with line input cable. 2. Select a source to AUX. 3. Play the connected Auxiliary Equipment. 4. Rotate the volume knob on the unit to adjust the volume. Or press VOLUME W / S on the remote control. Preventing radical changes in volume as switching sources Only when you set AUX to ON as switching sources, you can adjust the volume level of each source to prevent radical changes in volume by selecting GAIN 0 / +3 / +6. 1. Press F on the unit. Or press FUNC MENU on the remote control. 2. Rotate the volume knob on the unit. Or press w / s on the remote control to set the option. (GAIN 0 / +3 / +6) 3. Press the volume knob on the unit. Or press ENTER on the remote control to confirm the setting. If you want to return to the previous step, press 4. Or press on the remote control. Operating 17 Listening to a preset station 1. Press BAND repeatedly to select a desired band. 2. Press the volume knob on the unit. Or press ENTER on the remote control. 3. Rotate the volume knob to select a preset station. Or press w / s on the remote control. 4. Press the volume knob. Or press ENTER on the remote control. Or Press BAND and then press the desired preset button among 1 to 6 on the remote control. Or press BAND and then press the desired preset button among 1 to 6 on the unit. (Only LCS710BR /
LCS710DAB) 3 O p e r a t i n g Listening to the TUNER 1. Press SRC repeatedly to select a source to TUNER. 2. Press BAND repeatedly to select a desired band. 3. For manual search, press and hold A / D on the unit until MANUAL is displayed. Then press it repeatedly to select a desired frequency. Or press and hold c / v on the remote control. For auto search, press A / D on the unit until SEARCH is displayed. (Except MW) Or press c / v on the remote control. 4. Rotate the volume knob on the unit to adjust the volume. Or press VOLUME W / S on the remote control. Storing desired frequencies manually 1. Press BAND to select a desired band you want to store. 2. Select the desired frequency by using A / D on the unit. Or use c / v on the remote control. 3. Press the volume knob and rotate the volume knob to select a preset station among 1 to 6 and then press and hold the volume knob until the beep sound is heard. Or press ENTER and press w / s to select a preset station among 1 to 6 and then press and hold ENTER until the beep sound is heard on the remote control. Or press and hold one of preset buttons among 1 to 6 on the remote control until the beep sound is heard. Or press and hold one of preset buttons among 1 to 6 on the unit until the beep sound is heard.
(Only LCS710BR / LCS710DAB) 4. Repeat steps 1 to 3 to preset other stations.
, Note When a station is stored on the preset numbers on which another station of the same band has already been preset, the previously preset station is automatically erased. 3 O p e r a t i n g 18 Operating Adjusting TUNER settings On the unit 1. Press F . 2. Rotate the volume knob to select an item and press it. 3. Rotate the volume knob to set the option and press it. If you want to return to the previous step, press 4. On the Remote Control 1. Press FUNC MENU. 2. Press w / s to select an item and press ENTER. 3. Press w / s to set the option and press ENTER. 4. If you want to return to the previous step, press
. y PTY (Program type, RDS (OPTIONAL)) It searches the radio stations by program type of FM tuner. The program types are displayed as follows. NEWS AFFAIRS INFO SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED WEATHER FINANCE CHILDREN SOCIAL RELIGION PHONE IN TRAVEL LEISURE DOCUMENT POP M ROCK M EASY M LIGHT M CLASSICS OTHER M JAZZ COUNTRY NATION M OLDIES FOLK M y A / S (Auto Store) The six strongest broadcasting frequencies will be stored under preset button 1 to 6 in the order of their signal strength. To cancel, press the volume knob (or ENTER on the remote control). y P / S (Preset scan) Each preset station appears. To cancel, press the volume knob (or ENTER on the remote control). y SENS (Tuner sensitivity) MID / HI / LOW In an area in which signal reception is weak, it helps the tuner to search more stations. The weaker the reception is, the lower option you should set to. RDS (OPTIONAL) y AF (Alternative Frequency) ON / OFF When the reception quality drops, the tuner automatically changes to another station in the network, broadcasting a better reception quality, using the PI and AF codes. y REG (Region) ON / OFF REG ON : The unit switches to another station, within the same network, broadcasting the same program when the receiving signals from the current station become weak. REG OFF : The unit switches to another station, within the same network when the receiving signals from the current station become weak.
(In this mode, the program may differ from the one currently received.) y TA (Traffic Announcement) ALARM / SEEK TA ALARM : When the tuned station has no TP information for 5 seconds, a double beep sound is output. TA SEEK : When the tuned station does not receive TP information for 5 seconds, the receiver retunes to the next station that has the TP information. y PI (Programme Identification) SOUND / MUTE PI SOUND : When the frequency of a tuned station switches to an AF (Alternative frequency) with an unidentified PI, it keeps the sound. PI MUTE : When the frequency of a tuned station switches to an AF with an unidentified PI, it mutes the sound until the PI is identified. y CT (Clock Time) ON / OFF You can use the RDS CT information to update the time. When RDS CT information is not received and then you set CT to OFF, you can adjust the time by yourself. Refer to the page 14 for setting the clock. Operating 19
, Note When a station is stored on the preset numbers on which another station of the same band has already been preset, the previously preset station is automatically erased. Listening to a preset station 1. Press BAND repeatedly to select a desired band. 2. Press and hold the volume knob on the unit. Or press ENTER on the remote control. 3. Rotate the volume knob to select a preset station. Or press w / s on the remote control. 4. Press the volume knob. Or press ENTER on the remote control. Or Press BAND and then press the desired preset button among 1 to 6 on the remote control. Or press BAND and then press the desired preset button among 1 to 6 on the unit. (Only LCS710DAB) 3 O p e r a t i n g Listening to the DAB
(Only LCS710DAB /
LCF810DAB) 1. Press SRC repeatedly to select a source to DAB. 2. Press BAND repeatedly to select a desired band. 3. Press the volume knob on the unit. Or press ENTER on the remote control. 4. Rotate the volume knob to select a station. Or press w / s on the remote control. 5. Press the volume knob. Or press ENTER on the remote control. 6. Press A / D on the unit to skip to another station. Or press c / v on the remote control. For auto search, press and hold A / D on the unit until ENS SRCH (Ensemble Search) is displayed. Or press and hold c / v on the remote control. 7. Rotate the volume knob on the unit to adjust the volume. Or press VOLUME W / S on the remote control. Storing desired frequencies manually 1. Press BAND to select a desired band you want to store. 2. Select the desired frequency by using A / D on the unit. Or use c / v on the remote control. 3. Press and hold the volume knob and rotate the volume knob to select a preset station among 1 to 6 and then press and hold the volume knob until the beep sound is heard. Or press and hold ENTER and press w / s to select a preset station among 1 to 6 and then press and hold the ENTER until the beep sound is heard on the remote control. Or press and hold one of preset buttons among 1 to 6 on the remote control until the beep sound is heard. Or press and hold one of preset buttons among 1 to 6 on the unit until the beep sound is heard.
(Only LCS710DAB) 4. Repeat steps 1 to 3 to preset other stations. y ANNOUNCE (Announcement) X / O Provides information on selected contents. TRFC (Traffic), TRNSP (Transport), WARN (Service Warning), NEWS, WTHR (Weather), EVNT (Event), SEVNT (Special Event), PINFO (Program Info), SPORT (Sport Report), FNNC (Financial Report) y LINK DAB+FM / OFF / DAB / FM When the reception quality drops, the tuner automatically changes to another station in the network. If the broadcasting is disconnected during operation, it does not sound until the next broadcasting is linked. It takes about 10 seconds. Depending on the amount of broadcasting information, it can be shorter or longer.
, Note If each preset number has no stored frequency,
"EMPTY" is displayed. 3 O p e r a t i n g 20 Operating Adjusting DAB settings On the unit 1. Press F . 2. Rotate the volume knob to select an item and press it. 3. Rotate the volume knob to set the option and press it. If you want to return to the previous step, press 4. On the Remote Control 1. Press FUNC MENU. 2. Press w / s to select an item and press ENTER. 3. Press w / s to set the option and press ENTER. 4. If you want to return to the previous step, press
. y PTY (Program type, RDS (OPTIONAL)) The program types are displayed as follows. When you select an item, it will start operating immediately. NEWS AFFAIRS INFO SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED WEATHER FINANCE CHILDREN SOCIAL RELIGION PHONE IN TRAVEL LEISURE DOCUMENT POP M ROCK M EASY M LIGHT M CLASSICS OTHER M JAZZ COUNTRY NATION M OLDIES FOLK M y A-SCAN (Auto Scan) Scans all available services. To confirm the lists, press the volume knob and rotate the volume knob. y P-SCAN (Preset Scan) The broadcasting frequencies stored in the preset number are received Sequentially. Each broadcasting frequencies are received for 6 seconds. y DRC (Dynamic Range Control) ON / OFF Automatically adjusts the audio level. Using an USB device /
SD card
[USB]
1. Open the USB cover. 2. Connect the USB device. 3. Press SRC repeatedly to select a source to USB. 4. Rotate the volume knob on the unit to adjust the volume. Or press VOLUME W / S on the remote control.
[SD]
1. Detach the control panel. (Refer to "About detachable control panel" on page 8 to 9.) 2. Connect the SD card. 3. Attach the control panel. 4. Press SRC repeatedly to select a source to SD. 5. Rotate the volume knob on the unit to adjust the volume. Or press VOLUME W / S on the remote control.
[LCS710BR / LCS710DAB] [LCF810BR / LCF810DAB]
Moving to another drive When connecting this unit to multi-reader, press BAND on the unit (or DRV on remote control) to go the next drive. Each time you press the button, the driver modes change. Quick Search of a desired le You can select and play a desired file regardless of the order in USB device / SD card. 1. Press the volume knob on the unit. Or press ENTER on the remote control. 2. Rotate the volume knob on the unit to select a desired ROOT or folder and press it. Or press w / s and press ENTER on the remote control. Operating 21 3. Rotate the volume knob on the unit to select a desired track / file and press it. Or press w / s and press ENTER on the remote control.
, Note Other functions are same with "Listening to a CD". Refer to page 14 to 15. Playable USB device / SD card Requirement y Do not extract the USB device / SD card during operation (play, etc.). y An USB device / SD card which requires additional programme installation when you have connected it to a computer, is not supported. y Regular back up is recommended to prevent data loss. y If you use a USB extension cable, USB HUB, USB Multi-reader, or external HDD, the USB device may not be recognized. y When you connect a partitioned USB device into the unit, only the first partition is recognized on it. y Some USB device may not work with this unit. y Digital camera and mobile phone are not supported. y USB Port of the unit cannot be connected to PC. The unit cannot be used as a storage device. y Using FAT (16 / 32) file system is supported. Using NTFS file system is supported to read only. Recording to USB device / SD card
[USB]
1. Open the USB cover and connect it to the unit. 2. Select one of the following lists.
(CD, FM tuner, DAB, Bluetooth Handsfree) 3. Press R to start recording. For one track CD recoridng, press it once. For all tracks recording, press and hold it until the beep is heared. (In case of MP3 / WMA CD, recorded all files in the folder.) 4. Press it again to stop. 3 O p e r a t i n g 3 O p e r a t i n g 22 Operating
[SD]
1. Detach the control panel and connect it to the unit. Then attach the control panel.
(Refer to "About detachable control panel" on page 8 to 9.) 2. Select CD only. 3. Press R to start recording. For one track CD recoridng, press it once. For all tracks recording, press and hold it until the beep is heared. (In case of MP3 / WMA CD, recorded all files in the folder.) 4. Press it again to stop.
, Note y [USB] Only in CD, FM tuner, DAB and Bluetooth Handsfree, recording is available.
[SD] Only in CD, recording is available. y Do not remove the USB device / SD card during recording, or an incomplete file may be made and not deleted on PC. y When USB device / SD card is not connected, "NO USB" / "NO SD" [LCS710BR
/ LCS710DAB] "REC ERR NO USB" / "REC ERR NO SD" [LCF810BR / LCF810DAB] displays and cannot record. y When USB device / SD card memory is full,
"MEMORY FULL" [LCS710BR / LCS710DAB]
"REC ERR MEMORY FULL" [LCF810BR /
LCF810DAB] displays and stops recording. y While FM tuner / DAB / Bluetooth Handsfree recording, the broadcastings are recorded as a file every 20 minutes. y While one track CD recording, "REC 1"
appears. While other recording, "REC"
appears. y You can adjust the recording speed.
(Refer to the page 15.) The making of unauthorized copies of copy-
protected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offense. This equipment should not be used for such purposes. Be responsible Respect copyrights Listening to music by connecting iPod /
iPhone You can enjoy iPod / iPhone-stored music on the unit by connecting it to the USB connector using the appropriate cable.
[LCS710BR / LCS710DAB] [LCF810BR / LCF810DAB]
1. Open the USB cover. 2. Connect the iPod / iPhone. 3. Press SRC to select a source to USB. 4. Rotate the volume knob to adjust the volume on the unit. Or press VOLUME W / S on the remote control.
, Note Refer to the page 23 to check the compatible iPod model for this unit. Pausing or restarting playback 1. Press N on the unit to pause playback. Or press d/M on the remote control. 2. Press it to resume playback. Searching for a section within a track / le During playback, press and hold A / D and then release at a point you want. Checking information about your music MP3 / WMA files often come with tags. The tag gives the Title, Artist or Album. Press DISP repeatedly during MP3 / WMA file playback. If there is no information, "NO TEXT" will be shown in the display window. Playing back tracks / les in a way you want On the Unit 1. Press F . 2. Rotate the volume knob to select an item and press it. 3. Rotate the volume knob to select the option. 4. Press the volume knob to set the option. If you want to return to the previous step, press
. On the Remote Control 1. Press RPT / SHF. 2. Press it again to cancel. Or 1. Press FUNC MENU. 2. Press w / s to select an item and press ENTER. 3. Press w / s to select the option. 4. Press ENTER to set the option. If you want to return to the previous step, press
. y RPT (Repeat) The current selected tracks / files (1 RPT) or folder (
repeatedly. RPT) on the iPod / iPhone is played y SHF (Shuffle) SHF) or all of the tracks / files (SHF) on the Each file in the currently selected album
iPod / iPhone are played randomly. During random playback, even if you press A, you won't go back to the previous track. y SPD (BOOK SPEED) You can adjust the audiobook speed of iPod /
iPhone to NOR (Normal), FAST or SLOW. Operating 23 Playing back les by music menus You can check files by music menus and play it back. The music menus are as follows. PLAYLISTS / ARTISTS / ALBUMS / GENRES
/ SONGS / COMPOSER / AUDIO BOOK /
PODCAST / ... 1. Press the volume knob on the unit. Or press ENTER on the remote control. 2. Rotate the volume knob on the unit to select a music menu and press it. Or press w / s on the remote control. 3. Rotate the volume knob on the unit to select a file. Or press w / s on the remote control. 4. Press the volume knob on the unit to confirm the setting. Or press ENTER on the remote control. 5. If you want to return to the previous step, press
. Or press on the remote control. Two way Control You can control on the unit and iPod / iPhone. y Press on the unit. Then playback is paused. And you can control on the unit and iPod / iPhone. y While using the Two way Control, any functions are not available on the unit. y Press again to cancel the Two way Control. Compatible iPod models iPod classic (5th / 6th generation) iPod nano (1st / 2nd / 3rd / 4th / 5th generation) iPod touch (1st / 2nd / 3rd generation) iPhone iPhone 3G iPhone 3GS iPhone 4 We recommend that you use the OS Version 4.2.1 or more. 3 O p e r a t i n g 24 Operating Made for iPod means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. Works with iPhone means that an electronic accessory has been designed to connect specifically to iPhone and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. iPod is a trademark of Apple Inc., registered in the U.S. and other countries. iPhone is a trademark of Apple Inc. 3 O p e r a t i n g Connecting a Bluetooth wireless technology Before you start the pairing procedure, make sure the Bluetooth wireless technology is turned on in to your phone. Refer to your phones user guide. Pairing links your unit and phone with Bluetooth wireless technology, and is required only once for the initial setup. If the connection is successful, the phone is registered (Device 1 to 10) and the flashing of indicator stops on the unit. The process of pairing may be different depend on the phones. The PIN CODE is 1234. 1. Enter the menu. 2. Find the CONNECT menu. ON PLAYER Rotate the volume knob 3. Search the phones supported Bluetooth wireless technology. Press the volume knob 4. Select a phone you want to connect. Rotate the volume knob 5. Connect the phone. 6. Select the CONNECT menu. Press the volume knob Press the volume knob Unit has a built-in microphone.
[LCS710BR / LCS710DAB] [LCF810BR / LCF810DAB]
Using the buttons for Bluetooth wireless technology Using a Bluetooth wireless technology Operating 25 a b c d Volume knob a
contents of the setting.
vertically on the setting or choose a spell when you write the words on the unit. b
c
Ends a call. d A / D Adjusts the mic volume while talking on the phone by BT function.
A : Press it to delete a spell or go back previous contents. Press more 1 second to delete all words entered on display when you write some words on the unit.
D : When you write some words on the unit, press it to move next space on display. Disconnecting a phone Go to the menu (
Connected device name -> DISCONN).
-> CONNECT -> LIST ->
Answering and Ending a call When your unit rings, press To end a call, press
. to answer a call. Rejecting a call When your unit rings, press
. Making a call saved as a preset number Press and a preset number (1 to 6). Checking missed calls When an incoming call is not answered, the missed call message is displayed on the display window
(without headset profile). When the ? appears, go to the menu (
-> CALL -> LASTCALL). You can check the list of missed call. To place a call, press
. And to end the call and hang up the phone, press
. 3 O p e r a t i n g
, Note y The lists of LAST CALL are sorted from newest to oldest entries. y When you want to make an international call, press D to add + and to delete it press again. y + can only be added when the detail list of LASTCALL is selected. y Rejecting a call / Making a call saved preset number / Missed call notification
(These features are only available on phones with Headset / Handsfree profile.) y You can record the Bluetooth Handsfree to USB. (Refer to the page 21 to 22.) Profile) OPP (Object Push Profile) PBA / PBAP (Phone Book Access Profile) WICS (Wireless Controller &
Synchronization) You can control the unit by using the "WICS"
application. 1. Search the WICS application and install it.
[Displays installed "WICS" application]
2. Pairing links your unit and iPhone with Bluetooth wireless technology. (Refer to the page 24.) 3. When you run the WICS application, activating source is displayed after initial screen. Then you can control the unit on iPone.
[Initial screen] [Tuner screen]
3 O p e r a t i n g 26 Operating Saving call numbers in the latest calls You can easily save up to 6 phone numbers in the latest calls. Go to the menu (CALL -> LASTCALL
-> Rotate the volume knob to select the phone number you want to save -> SAVE -> select 1 to 6). Audio transfer It is possible to switch the audio connection between your phone equipped with Bluetooth wireless technology and this unit. 1. Press 2. Press If the private mode is selected on the unit, press to return to the call to hands-free mode. to answer the call. again. The PRIVATE is displayed. Paring your unit and device with Bluetooth wireless technology (MP3 Player, MP3 Phone...) When you activate your Bluetooth devices linked unit, you can listen to MP3 with wireless connections. The method of use for a Bluetooth device is the same as when using a Bluetooth phone. Refer to the phones user guide for using this function. Playing MP3 les When you turn Bluetooth on, your device supported Bluetooth wireless technology displays Bluetooth on the home screen. The Bluetooth remains on until you turn the device off. Press SRC repeatedly to select BT Music. To play an MP3 file stored on your device. Refer to the phones user guide for using this function. This feature is only available on phones with A2DP(Advanced Audio Distribution Profile). Bluetooth wireless technology proles information In order to use Bluetooth wireless technology, devices must be able to interpret certain profiles. This unit is compatible with following profiles. GAP (Generic Access Profile) HFP (Hands Free Profile) HSP (Hands Set Profile) GAVDP (Generic Audio / Video Distribution Profile) A2DP (Advanced Audio Distribution Profile) AVRCP (Audio / Video Distribution Remote Control Operating 27 available on phones with OPP (Object Push Profile). CONNECT y LIST Checks the list of the Connected Device Name. y SEARCH Searches the phones available to connect. The Connected Device Name is displayed on the top. SETUP y VISIBLE Makes it is impossible to search this unit.
(SHOWN <-> HIDDEN) y AUTO CON Adjusts connection with automatically or not.
(ON <-> OFF) y AUTO ANS Adjusts answering automatically or not.
(AUTO <-> MANUAL) y MIC VOL Adjusts microphone volume on the phone from 1 to 5. While you are on the phone with Bluetooth wireless technology, rotate the volume knob to adjust the MIC volume. y REDIAL Adjusts the counts of redial. (1 TIME <-> 2 TIMES) INFO y NAME Changes the name of this unit. y ADDRESS Checks the address. y PIN-CODE Changes the PIN code. Default is 1234. 3 O p e r a t i n g Adjusting the setting 1. Press 2. Rotate the volume knob to select an item and
. press it. 3. Rotate the volume knob to set the option and press it. 4. If you want to return to the previous step, press
. CALL y LASTCALL
. Phone number list (received, dialed, missed). To call the phone number, select the phone number and press To save it, select the phone number and press the volume knob. "SAVE" will be shown. Press the volume knob again. Rotate the volume knob to select a preset number (1 to 6). Press the volume knob again. The phone number be saved. y DIAL Enters the number directly on the unit. To select the 0 to 9 rotate the volume. Press D to make the phone number. To call it, Press
. y PRESET Checks and deletes the phone number saved preset number. To delete the phone number, select the preset number by rotating the volume knob. And then press the volume knob. Press the volume knob again when the DELETE is displayed. P-BOOK y LIST Checks the list of the phone numbers saved by phonebook. y SEARCH Searches the phone number in the list. (English and Russian only) y GET Getting the phonebook from the phone automatically. This menu is only available on phones with PBA / PBAP (Phone Book Access Profile). y ADD P-BOOK -> ADD -> Press the volume knob ->
"000/500" will be displayed. Then send the phonebook data from your phone. Depend on your phone, the sending process is different. Refer to your phone's guide. This menu is only 28 Operating Phone compatibility list Bluetooth list and manufacturing H : Hnadsfree P : Phonebook Sync (GET) company applicable. A : Audio Streming (A2DP) V : Object Push (Vcard, ADD) Company List Nokia 3 O p e r a t i n g 3230 3250 3650 5300 6021 6103 6120 6131 6230 6270 6280 6300 6500 6600 6630 6650 6670 6680 6681 6820 7370 7380 7610 7650 7600 8600 8800 9500 3650 (Italy) 5500 SPORT 6230i 6820a 7500prism 7650 (Italy) 8910i 9300l E50 E51 E60 E61 E62 H O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O A P O O O O O O O O O O O O O O O O O O O O O O O O V O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O Company List Nokia Motorola E70 E71 E73 E90 N70 N71 N73 N77 N80 N82 N90 N91 N92 N93 N95 N-Gage N-Gage QD E63 N72 N97 N81 N85 N86 8MP N95 N96 5530 5310 5320 5800i 5800 6120C 6303C 2630 6110 Navigator 6288 E65 E75 A1000 A780 E1000 E1070 H O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O A O O O O O O O O O O O O O O O O O O O O O O O O O O O P O O O O O O V O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O Company List Motorola SONY ERICSSON E398 E550 E680 E680i KRZR K1 L72 RAZR V3 RAZR V3i RAZR V3X RAZR V9 RIZR Z3 RIZR Z8 ROKR E2 ROKR E6 SLVR L7 U6 V195 V360 V3ROHS V500 V525 V600 A1600 A1890 V8 A1200 V6 W510 K610i K618i K700i K750i K770i K800i K850i M600i P1i P990i S500i S700i T610 H O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O A O O O O O O O O O O O O O O O O O O O O O O O O P O O O O O O O O O O O O O O O O O O O O O O O V O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O Operating 29 Bluetooth list and manufacturing H : Hnadsfree P : Phonebook Sync (GET) company applicable. A : Audio Streming (A2DP) V : Object Push (Vcard, ADD) Company List SONY ERICSSON SAMSUNG T68i V600 V800 W550i W710i W800i W810i W850i W980i Z1010 Z600 W300 W880 W910 Z610 D500 D600 D820 D900 E770 E900 i600 T509 X820 Z540V A707(SYNC) S5230 D900 i8910 S8003 S8300 E950 F210 F300 P O O O O O O O O O O O O O O O H O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O A O O O O O O O O O O O O O O O O O O O O O V O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O Company List SAMSUNG SIEMENS BLACK BERRY HP PALM PHILPS SHARP l-MATE PANTECH HTC G600 i900 L600 U600 U700 Z170 T509 EF81 S55 S65 S88 SD65 SL75 SX1 SXG75 8800 8100(PEARL) 8707v BOLD 9000 Curve 8310 HW6915 iPAQ h6315 Treo750v O2 Xda Atom GX15 GX25 K-JAM PG-6200 PG-8000 Touch Touch Pro H O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O A O O O O O O O O O O O O O P O O O O O O O V O O O O O O O O O O O O O O O O O O O O O O O O O O O O O Company List LG CU500 KE970 KG245 KG800 U880 U890 M4410 KF600 KE850 Prada KG290 KE500 KM500 KU990 Viewty KU580 KU970 KU960 U370 KE770 GD900 KF900 Prada KC910 Renoir KM900 Arena KS10 KU250 NEC N750 N930 SAGEM MYX6-2 Apple iPone iPone 3G iPone 3GS V O O O O O O O O O O O O O O O O O O O O O O H O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O P A O O O O O O O O O O O O O O O O O O O O O 3 O p e r a t i n g
, Note y When the phone features <Bluetooth Power Save> function, you should make the function turned on to maintain connection. y When you switch the call mode from handsfree to phone, the connection may be disconnected. y Some phones dont support Reject function. y Low battery in phone may cause the problems. 30 Operating The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by LG Electronics is under license. Other trademarks and trade names are those of their respective owners. Bluetooth wireless technology is a system which allows radio contact between electronic devices within a max range of 10 meters. Connecting individual devices under Bluetooth wireless technology does not incur any charges. A mobile phone with Bluetooth wireless technology can be operated via the Cascade if the connection was made via Bluetooth wireless technology. operating condition for using a Bluetooth wireless technology function y Close windscreen. y Turn off the air conditioner / heater. y Stop the vehicle or drive at low speed. y Make the call in a quiet location.
- There may be differences in call quality depending on phone type, road conditions weather, etc.
- Using the phone while driving may cause unexpected accidents.
- The Bluetooth wireless technology function may not operate properly with certain types of phones equipped with Bluetooth wireless technology. 3 O p e r a t i n g Troubleshooting 31 Troubleshooting Symptoms Power doesn't turned on. The unit doesn't operate. Cause Leads and connectors are not properly. Solution Confirm once more that all connections are correct. The fuse is blown. Noise and other factors are causing the built in microprocessor to operate incorrectly. Cables are not connected correctly. Rectify the problem that caused the fuse to blow, and then replace it. Be very sure to install the correct fuse with the same rate. Turn the unit off and then on again. Connect the cables correctly. No sound is heard. There's audio skipping. This unit is not firmly secured. Secure this unit firmly. The playback is not possible. The disc is dirty. Clean the disc. The disc of unplayable type is loaded. The signal strength of the stations is too weak. (When tuning in with automatic tuning.) No station has been preset or preset stations have been cleared. (When tuning by scanning preset stations.) Check whether iPod / iPhone is connected to the unit correctly. Check what type the disc. Tuned in the stations manually. Preset the stations.
(Refer to the page 17.) Connect it to the unit correctly. Battery power is low. Load a new battery. 4 l T r o u b e s h o o t i n g Radio stations cannot be tuned in. iPod/ iPhone does not work. The unit does not operate correctly even when the appropriate remote control buttons are pressed. USB Version : USB 1.1 or USB 2.0 Full Speed Bus Power Supply (USB) : DC 5 V 1 A SD Distortion : 0.1 %
Line OUT Frequency Response : 20 Hz to 20 kHz Output Voltage : 2 V (Max.) Subwoofer Frequency Response : 20 Hz to 120 Hz Output Voltage : 2 V (Max.) y Design and specifications are subject to change without notice. 32 Appendix Specications General Output Power : 53 W x 4 CH (Max.) Power Source : DC 12 V Speaker impedance : 4 Ground System : Negative Dimensions (W x H x D) : (178 x 50 x169) mm
(without Control Panel) Net Weight : 1.37 kg TUNER FM Tuning Range :
87.5 MHz to 108.0 MHz S / N Ratio : 55 dB Distortion : 0.7 %
Usable Sensitivity : 12 dBV AM (MW) Tuning Range :
(520 to 1720) kHz or (522 to 1620) kHz S / N Ratio : 50 dB Distortion : 1.0 %
Usable Sensitivity : 28 dBV DAB Distortion : 0.1 %
Channel Separation (1 kHz) : 68 dB CD Frequency Response : 20 Hz to 20 kHz S / N Ratio : 80 dB Distortion : 0.12 %
Channel Separation (1 kHz) : 55 dB AUX Frequency Response : 20 Hz to 20 kHz S / N Ratio : 80 dB Distortion : 0.1 %
Channel Separation (1 kHz) : 45 dB Max Input Level (1 kHz) : 1.1 V 5 A p p e n d x i Federal Communications Commission(FCC) Statement You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--. Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver connected Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
) this device must accept any interference received, including interference 2 that may cause undesired operation of the device. FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. End users must follow the specific operation instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating ing conjunction with any other antenna or transmitter.
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2011-12-29 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 | Effective |
2011-12-29
|
||||
| 1 | Applicant's complete, legal business name |
LG Electronics USA
|
||||
| 1 | FCC Registration Number (FRN) |
0020917688
|
||||
| 1 | Physical Address |
1000 Sylvan Avenue
|
||||
| 1 |
Englewood Cliffs, New Jersey 07632
|
|||||
| 1 |
United States
|
|||||
| app s | TCB Information | |||||
| 1 | TCB Application Email Address |
c******@ccsemc.com
|
||||
| 1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
| app s | FCC ID | |||||
| 1 | Grantee Code |
BEJ
|
||||
| 1 | Equipment Product Code |
9QK-LCF810
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 | Name |
K******** H******
|
||||
| 1 | Title |
Director, Standards & Compliance
|
||||
| 1 | Telephone Number |
201-4********
|
||||
| 1 | Fax Number |
201-8********
|
||||
| 1 |
k******@lge.com
|
|||||
| app s | Technical Contact | |||||
| n/a | ||||||
| app s | Non Technical Contact | |||||
| n/a | ||||||
| app s | Confidentiality (long or short term) | |||||
| 1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 06/26/2012 | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
| 1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Car Audio | ||||
| 1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 | Modular Equipment Type | Does not apply | ||||
| 1 | Purpose / Application is for | Original Equipment | ||||
| 1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
| 1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 | Grant Comments | Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. | ||||
| 1 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 | Firm Name |
DT&C Co., Ltd.
|
||||
| 1 | Name |
L******** S********
|
||||
| 1 | Telephone Number |
82-31********
|
||||
| 1 | Fax Number |
82-31********
|
||||
| 1 |
g******@dtnc.net
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0008000 | ||||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC