Users Guide 910B Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference. See the label attached on the back cover and quote this information to your dealer when you require service. Announcement NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE SUCH MODIFICATIONS ATE THE EQUIPMENT. COULD VOID THE USER'S AUTHORITY TO OPER CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. This equipment generates, uses NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the inter ference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Increase the separation between the equipment and receiver. If this equipment does cause harmful Important Precautions This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential eletrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this monitor, observe the following basic rules for its installation, use, and servicing. Keep it in an accessible place for future reference. On Safety Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is certified by the applicable national standards if not being provided by the supplier. If the power cable is faulty in any way, please contact the manufacturer or the nearest authorized repair service provider for a replacement. The power supply cord is used as the main disconnect device. Ensure that the socket-outlet is easily accessible after installation. Operate the monitor only from a power source indicated in the specifications of this manual or listed on the monitor. If you are not sure what type of power supply you have in your home, consult with your dealer. Overloaded AC outlets and extension cords are dangerous. So are frayed power cords and broken plugs. They may result in a shock or fire hazard. Call your service technician for replacement. Hands must be dry when holding the power plug to avoid an electric shock. Do not damage the power cord by disassembling, bending, pulling or heating up. It can cause fire or electric shock. Make sure to completely insert the power plug. Insecure connections can cause fire. Do not Open the Monitor. There are no user serviceable components inside. There are Dangerous High Voltages inside, even when the power is OFF. Contact your dealer if the monitor is not operating properly. To Avoid Personal Injury :
Do not place the monitor on a sloping shelf unless properly secured. Use only a stand recommended by the manufacturer. Do not try to roll a stand with small casters across thresholds or deep pile carpets. A1 Important Precautions To Prevent Fire or Hazards:
Always turn the monitor OFF if you leave the room for more than a short period of time. Never leave the monitor ON when leaving the house. Keep children from dropping or pushing objects into the monitor's cabinet openings. Some internal parts carry hazardous voltages. Do not add accessories that have not been designed for this monitor. During a lightning storm or when the monitor is to be left unattended for an extended period of time, unplug it from the wall outlet. Do not bring magnetic devices such as magnets or motors near the picture tube. On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the monitor where the power cord is subject to damage. Do not use this monitor near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Monitors are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the monitor on a bed, sofa, rug, etc. Place the monitor in a built-in enclosure unless proper ventilation is provided. Cover the openings with cloth or other material. Place the monitor near or over a radiator or heat source. Do not install the monitor in a dusty area. It can cause fire. On Cleaning Unplug the monitor before cleaning the face of the monitor screen. Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the monitor screen because overspray may cause electrical shock. On Repacking Do not throw away the carton and packing materials. They make an ideal container in which to transport the unit. When shipping the unit to another location, repack it in its original material. A2 Connecting the Monitor Before setting up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices. Carefully set the monitor face-down with the underside facing you. Connecting the Tilt/Swivel stand 1. Align the hooks on the tilt/swivel stand with the matching slots in the base of the monitor. 2. Insert the hooks into slots. 3. Slide the tilt/swivel stand toward the front of the monitor until the latches click into the locked position. NOTE This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. Slot Hook Latch Hook A3A3 Connecting the Monitor Using the Computer 1. Connect the signal cable. When mated, tighten the thumbscrews to secure the 2. Connect the power cord into a properly power outlet that is easily accessible and connection. close to the monitor. NOTE This is a simplified representation of the rear view. This rear view represents a general model; your monitor may differ from the view as shown. Power Cord Signal Cable Attached Type*
Detached Type*
Wall-outlet type*
* Varies according to model. PC-outlet type*
PC MAC Mac adapter For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector. A4 Control Panel Functions Front Panel Controls Control Function Power Button Use this button to turn the monitor on or off. Power (DPMS) Indicator This Indicator lights up green when the monitor operates normally. If the monitor is in DPM
(Energy Saving) mode, this indicator color changes to amber. MENU (or OSD) Button Use this button to enter or exit the on screen display. Buttons Use these buttons to choose or adjust items in the on screen display. SELECT (or SET) Button Use this button to enter a selection in the on screen display. Control Direct Access Function Button Bring up Contrast adjustment Button Bring up Brightness adjustment The Contrast and Brightness functions are also available in the On Screen Display (OSD) menu. A5 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the monitor is quick and easy with the On Screen Display Control system. A short example is quick and easy given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. NOTE Allow the monitor to stabilize for at least 30 minutes before making image adjustments. To make adjustments in the On Screen Display, follow these steps:
Case 1 Case 2 Press the MENU (or OSD) Button, then the main menu of the OSD appears. To access a control, use the or Buttons. When the icon you want becomes highlighted, press the SELECT (or SET) Button. Use the Buttons to adjust the item to the desired level. Accept the changes by pressing the SELECT (or SET) Button. Exit the OSD by Pressing the MENU (or OSD) Button. A6 On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and setting menus. Main menu Sub menu Reference To adjust the brightness and contrast of the screen To adjust the position of the screen To adjust the size of the screen To adjust the shape of the screen To customize the color of the screen To customize the screen status for a user's operating environment To improve the clarity and stability of the screen BRIGHTNESS/
CONTRAST POSITION SIZE SHAPE COLOR SETUP SPECIAL Brightness Contrast V Position H Position V Size H Size Tilt Side Pincushion S Pincushion Balance Parallelogram Trapezoid H Corner Top Corner Bottom Corner PRESET 6500K 9300K Temp R/G/B(User Color) Video Level Language OSD Time Degauss Recall Reset Moire H Moire V Moire Convergence *
Purity
: Adjustable A7 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. NOTE The order of icons may differ depending on the model (A8~A11). To adjust the brightness and contrast of the screen OSD Adjust Description Brightness To adjust the brightness of the screen. Contrast To adjust the contrast of the screen. To adjust the position of the screen OSD Adjust Description Vertical Position To move image up and down. Horizontal Position To move image left and right. A8 On Screen Display(OSD) Selection and Adjustment To adjust the size of the screen OSD Adjust Description Vertical Size To adjust image height. Horizontal Size To adjust image width. To adjust the shape of the screen OSD Adjust
* This function is available for designated models only. A9 Description Tilt To correct image rotation. Side Pincushion To correct a concave or convex bowing of the image. Side Pincushion Balance To correct the balance of both sides bowing. Parallelogram To correctly adjust the skew of the image. Trapezoid To correct geometric distortion. H Corner*
Top Corner*
Bottom Corner*
To correct an irregular distortion of the displayed image. On Screen Display(OSD) Selection and Adjustment To customize the color of the screen OSD Adjust Description PRESET 6500K/ 9300K Select the screen color. 6500K: Slightly reddish white. 9300K: Slightly bluish white. TEMP RED GREEN BLUE Select the screen temperature which you prefer among reddish or bluish or any color in between. Set your own color levels. To customize the screen status for a user's operating environment OSD Adjust Description VIDEO LEVEL LANGUAGE OSD TIME This item is used to select the monitor's input signal level. The normal level used for most PCs is 0.7V. If the screen becomes suddenly washed-
out or blurred, please select 1.0V and try again. To choose the language in which the control names are displayed. OSD Menus are available in 12 languages:
English, German, French, Spanish, Italian, Swedish, Finnish, Portuguese, Korean, Chinese , Russian and Polish. Set the OSD time, i.e. the length of time a menu will remain on-screen before it shuts off automatically. Adjust the time to 5, 10, 20, 30 or 60 seconds. A10 On Screen Display(OSD) Selection and Adjustment To improve the clarity and stability of the screen OSD Adjust Description DEGAUSS To manually demagnetize the screen to avoid showing incorrect images or colors. RECALL RESET MOIRE You can use this function to reload the modified parameters for screen display operation, as specified by the user after purchase: Position, Size, Side Pincushion, Trapezoid (These recalled options may differ depending on the mode selected: Preset, User, or New). If you dont want to recall the monitor to these modified settings, use the button to select CANCEL and then press the SELECT (or SET) button. Return to all factory default settings except
"LANGUAGE": Brightness, Contrast, Tilt, Color 9300K, Video Level, OSD Time, Moire, Purity (These reset options may differ depending on the mode selected: Preset, User, or New). If you dont want to reset the monitor, use the button to select CANCEL and then press the SELECT (or SET) button. This item allows you to reduce the degree of moire. (Moire is caused by interference Horizontal Scan Line with the periodical dot screen). It is normally OFF(H:0/V:20). The moire adjustments may affect the focus of the screen. Moire adjustments may shake slightly while the moire reduction function is on.
* This function is available for designated models only. CONVER-
GENCE*
PURITY*
This is to adjust the alignment of red and blue fields. Use to adjust the purity on the screen if the color appears uneven. A11 Troubleshooting Check the following before calling for service. No image appears Is the power cord of the monitor connected?
Check and see if the power cord is connected properly to the power outlet. Is the power indicator light on?
Press the Power button. Is the power on and the power indicator green?
Is the power indicator amber?
Do you see an "OUT OF FREQUENCY" message on the screen?
Adjust the brightness and the contrast. If the monitor is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. This message appears when the signal from the PC
(video card) is out of horizontal or vertical frequency range of the monitor. See the 'Specifications' section of this manual and configure your monitor again. Do you see a "SELF DIAGNOSITICS" message on the screen?
This message appears when the signal cable between your PC and your monitor is not connected. Check the signal cable and try again. The screen is flickering. Is the vertical frequency less than 70Hz or is your monitor set to the interlaced mode?
Do you have any magnetic material such as adapter, or high-
voltage line near to your monitor?
Do you hear a "~ding"
sound while the monitor is flickering?
Set the vertical frequency to 72Hz or higher, and consult the video card user manual for instructions on converting to a non-interlaced mode.
(You can set this option under the Display icon of the Control Panel.) Remove magnetic sources, such as power adapters, speakers, or high-voltage lines, away from the monitor. Use the normal degaussing function. This function clears the screen and reduces any screen blur that may occur due to the surrounding magnetic field. The screen may flicker for about 5 seconds, accompanied by a "~ding" sound. A12 Troubleshooting The screen color is not normal. Do you see basic discoloration (16 colors)?
Is the screen color unstable or monochrome?
Do you see black dots on the screen?
Do you see a partial blurring on the screen?
'Display'
'Settings'
'Color Palette'
Set the color depth to 256 colors or higher: use 'Control Panel'
Check the connection of the signal cable. Or pull out the video card of the PC and insert it again. This is due to a small amount of foreign or abnormally florescent material that became fastened on the mask during manufacturing. It will not affect product performance. This happens due to interference from surrounding magnetic fields, as created when speakers, steel structures, or high-voltage lines are placed near the monitor. Remove any such materials from the immediate vicinity and use the DEGAUSS icon on the screen adjustment menu to fix the screen. I see an after-image on the screen. Do you see the after-image even when you turn off the monitor?
A premature aging of the monitor pixels may cause the prolonged display of a single image on the screen. Be sure to use a screen saver to maximize the service life of the monitor. I see waves on the screen. Do you see the wave directly on the screen?
This occurs in inverse proportion to the screen focus, which can be caused by a particular frequency or video card. Brighten the screen and use the 'MOIRE' icon on the screen adjustment menu to adjust the screen. Have you installed the monitor driver?
Have you installed the monitor driver?
Be sure to install the monitor driver from the monitor driver CD (or diskette) that comes with your monitor. Or, you can also download the driver from our web site:
http://www.lge.com. A13 Specifications Picture Tube Sync Input Video Input Resolution Plug&Play Power Consumption Dimensions
&Weight
(with tilt/ swivel stand) Power Input Environmental Conditions Tilt/Swivel Stand Signal cable Power cord 19 inches (18.0 inches viewable) 90 degree deflection 0.26mm dot pitch ARAS(Anti-Reflective Anti-Static) coating Horizontal Freq. Vertical Freq. Input Form 30 - 98kHz (Automatic) 50 - 160Hz (Automatic) Separate TTL, Positive/Negative CompositeTTL, Positive/Negative 15 pin D-Sub Connector Separate, RGB Analog, 0.7Vp-p/75 ohm, Positive 3W 43.50 cm / 17.1 inches 43.90 cm / 17.3 inches 46.00 cm / 18.1 inches 19.0 kg (41.9 lbs) AC 200-240V~ 50Hz 1.0A AC 100-240V~ 50/60Hz 2.0A Signal Input Input Form Max Flicker Free VESA 1600 x 1200@75Hz Recommend VESA 1280 x 1024@85Hz DDC 2B 83W Normal Stand-by/Suspend 8W DPM Off Width Height Depth Net Europe Others The products should be used according to the Power requirements of each ID LABEL. Operating Conditions Temperature Humidity Storage Conditions Temperature Humidity Attached( ), Detached ( O ) Attached( O ), Detached ( ) Wall-outlet type or PC-outlet type 0C to 40 C 10 % to 90 % non-Condensing
-20C to 60 C 5 % to 90 % non-Condensing NOTE Information in this document is subject to change without notice. A14 Specifications Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 2 3 4 VESA VESA VESA VESA 640 x 480 800 x 600 1024 x 768 1280 x 1024 43.269 53.674 68.677 91.146 85 85 85 85 A15 Digitally yours