FCC ID: BEJPA70GJE DLP PROJECTOR

 

Order Number

: GETEC-C1-12-128 Test Report Number

: GETEC-E3-12-048 FCC Part 15 subpart B Page 1 / 1 APPENDIX G

: USERS MANUAL EUT Type: DLP PROJECTOR FCC ID.: BEJPA70GJE Owner's Manual DLP PROJECTOR Please read this manual carefully before operating your projector and retain it for future reference. PA70G www.lg.com 2 LICENSES LICENSES Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. ABOUT DIVX VIDEO: DivXr is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an ofcial DivX Certiedr device that plays DivX video. Visit divx. com for more information and software tools to convert your les into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certiedr device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. DivX Certiedr to play DivXr video up to HD 1080p, including premium content. DivXr, DivX Certiedr and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license. Covered by one or more of the following U.S. patents :

7,295,673; 7,460,668; 7,515,710; 7,519,274 HDMI, the HDMI logo and High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. This device meets the EMC requirements for home appliances (Class B) and is intended for home usage. This device can be used in all regions. NOTE

y Image shown may differ from your projector.

y Your projectors OSD (On Screen Display) may differ slightly from that shown in this manual. SAFETY INSTRUCTIONS 3 SAFETY INSTRUCTIONS Please take note of the safety instructions to prevent any potential accident or misuse of the projector. The lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufcient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING/CAUTION

TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Indoor Installation WARNING

y Do not place the projector in direct sunlight or near heat sources such as radiators, fires, stoves, etc.

- This may cause a fire.

y Do not place flammable materials such as aerosols near the projector.

- This may cause a fire.

y Do not allow your children to cling to or climb up to the projector.

- The projector may fall down and cause personal injury or death.

y Do not place the projector directly on a carpet, rug or place where ventila-

tion is restricted such as a book shelf or closet.

- This may cause the projector's in-

ternal temperature to rise and cause a fire.

y Do not place the projector close to sources of steam or oil such as a humidifier or kitchen counter.

- This may cause a fire hazard or an electric shock.

y Do not place the projector where it might be exposed to excessive dust.

- This may cause a fire. 4 SAFETY INSTRUCTIONS

y Do not use the projector in a damp place such as a bathroom where it is likely to get wet.

- This may cause a fire or an electric shock.

y Do not allow a tablecloth or curtain to block the vents.

- This may cause the internal tem-

perature of the projector to rise and cause a fire.

y The distance between the projector and the wall should be more than 30 cm for ventilation purposes.

- Otherwise, this may cause the inter-

nal temperature of the projector to rise and cause a fire. CAUTION

y When installing the projector on a table, be careful not to place it near the edge.

- The projector may fall causing injury to persons or damage to the projec-

tor. Make sure that you use a stand suitable for the size of projector.

y Turn off the projector, disconnect the power supply and remove all connec tions before moving the projector.

- A damaged cord may cause a fire or an electric shock.

y Do not install the projector on an unstable or vibrating surface such as a vibrating shelf or tilted surface.

- It may fall and cause injury.

y Be careful not to tip the projector over when connecting external devices to the projector.

- This may cause injury to persons or damage to the projector. Power WARNING

y The earth wire should be connected.

- Inappropriate earth grounding may cause damage to the projector or an electric shock when there is an electrical surge. If the projector must be installed at a place where earth grounding is not possible, purchase a circuit breaker and connect the projector to its wall outlet. Do not ground the projector to the gas pipe, water pipe, lightning rod, or telephone line, etc.

y The power plug should be fully insert-

ed into the wall outlet.

- Unstable connection may cause a fire.

y Do not place heavy objects on the power cord or place the cord under-

neath the projector.

- This may cause a fire or an electric shock.

y Never touch the power plug with a wet hand.

- This may cause an electric shock.

y Do not connect too many devices to the same power extension.

- Overheating may cause a fire.

y Remove dust or contaminants around power plug pins or wall outlets.

- This may cause a fire. SAFETY INSTRUCTIONS 5 When in Use WARNING

y Do not place anything containing liquid, such as a vase, flowerpot, cup, cosmetics, chemicals, decorations or candles, etc., on top of the projector.

- Possible fire, electric shock, or fall-

ing may cause physical injury.

y In the event that there is a big im-

pact to the projector or the cabinet is damaged, switch it off, unplug it from the wall outlet and contact an autho-

rized service center.

- Otherwise, this may cause a fire or an electric shock.

y Do not insert pieces of metal such as coins, hairpins or metal debris, nor flammable materials such as paper or matches into the projector.

- This may cause a fire or an electric shock.

y In the event that liquid or a foreign object falls into the projector, please switch it off and unplug it from the wall outlet and contact an LG Elec-

tronics Service Center.

- Otherwise, this may cause a fire or an electric shock.

y When replacing a battery of the re-

mote control, make sure a child does not swallow the battery. Keep the bat-

tery out of reach of children.

- In the case of a battery being swal-

lowed by a child, please consult a doctor immediately.

y Do not remove any covers except for the lens cap. There is a high risk of electric shock. CAUTION

y Hold the plug firmly when unplug-

ging.

- A broken wire in the cord may cause a fire.

y Ensure the power cord or plug is not damaged, modified, severely bent, twisted, pulled, sandwiched or heated. Do not use a loose wall outlet.

- This may cause a fire or an electric shock.

y Keep the power cord away from any heating devices.

- The cord coating may melt and cause an electric shock.

y Place the projector where people will not trip over or tread on the power cord or plug to protect the power cord and plug from any damage.

- This may cause a fire hazard or an electric shock.

y Do not turn the projector on or off by plugging in the power plug or un-

plugging it from the wall outlet.

(Do not use the power plug as a switch.)

- This may cause an electric shock or damage to the projector.

y Do not insert a conductor into the other side of the wall outlet while the power plug is inserted into the wall outlet. In addition, do not touch the power plug immediately after it is discon-

nected from the wall outlet.

- This may cause an electric shock.

y Use only the official power cord which is provided by LG Electronics, Inc. Do not use other power cords.

- This may cause a fire or an electric shock. 6 SAFETY INSTRUCTIONS

y Do not look directly into the lens when the projector is in use. The strong light may damage your eyes.

y When the lamp is on or has just been turned off, avoid touching the air vent or lamp because these will be very hot.

y If there is a gas leak, do not touch the wall outlet. Open the window for ventilation.

- A spark may cause a fire or burn.

y Always open the lens door and re-

move the lens cap when the projector lamp is on.

y Never touch the projector or power cord during thunder or lightning.

- This may cause an electric shock.

y Do not use the projector near an electronic device which generates a strong magnetic field.

y Store the vinyl envelope used to pack the projector in a safe place away from children.

- It could cause suffocation if used improperly.

y Do not use 3D glasses if you do not watch 3D.

y Do not keep your hand on the projec-

tor for a long time when it is running. CAUTION

y Do not place a heavy object on the projector.

- It may fall down and cause physical injury.

y Be careful to prevent the lens from heavy impact during transportation.

y Do not touch the lens. The lens may be damaged.

y Do not use any sharp tools on the projector such as a knife or hammer, because this may damage the casing.

y In the event that no image appears on the screen, switch the projector off, unplug it from the wall outlet and contact an authorized service center.

- Otherwise, this may cause a fire or an electric shock.

y Do not drop an object onto the pro-

jector or apply heavy pressure to it.

- This may cause injury to persons or damage to the projector.

y The distance between your eyes and the screen must be around 5 -

7 times the diagonal length of the screen.

- If you watch the screen at a close distance for a long time, your eye sight may become worse. Cleaning WARNING

y Do not spray the projector with water when cleaning. Do not allow water to go into the projector or do not allow it to get wet.

- This may cause a fire or an electric shock.

y When there is smoke or a strange smell coming out from the projector or a foreign object falls into the pro-

jector, please switch it off and unplug it from the power outlet and contact an LG Electronics Service Center.

- If not, this may cause a fire or an electric shock.

y Use an air spray or soft cloth or cotton swab moistened with a lens cleaning chemical or alcohol to remove dust or stains on the front projection lens. SAFETY INSTRUCTIONS 7 CAUTION

y Contact your seller or the Service Center once a year to clean the inter-

nal parts of the projector.

- If you do not clean the contaminat-

ed interior of the projector for a long time, there may be a fire or damage to the projector.

y When cleaning plastic parts such as the projector case, unplug the power first and wipe with a soft cloth. Do not spray with water or wipe with a wet cloth. When cleaning the plastic parts, such as the projector case, do not use cleanser, automobile or industrial shiner, abrasive or wax, ben-

zene, alcohol, etc., which can damage the product.

- This can cause fire, electric shock or product damage (deformation, cor-

rosion and damage). 8 SAFETY INSTRUCTIONS OTHERS WARNING

y Only a qualified technician can disas-

semble or modify the projector. For inspection, adjustment, or repair, con-

tact your seller or the Service Center.

- Otherwise, this may cause a fire or an electric shock. CAUTION

y Do not mix new batteries with old batteries.

- This may cause a fire or an electric shock caused by overheating and leakage.

y Unplug the power cord if the projec-

tor is not used for a long period.

- Accumulated dust may cause overheating, an electric shock from corroded insulation and a fire from an electrical surge.

y Only use the specified type of battery.

- Otherwise, this may cause an elec-

tric shock caused by overheating and leakage. Contents 9 36 3D FUNCTION 36 Before Watching 3D

 While Watching 3D 36 Requirements for Watching 3D Images 38

 To Use DLP-LINK (DLP-Ready) Type 38 39 Watching 3D Images Glasses CUSTOMIZING SETTINGS 40 40 SETUP Menu PICTURE Settings 41 45 AUDIO Settings 46 TIME Settings OPTION Settings 47 MAKING CONNECTIONS 49 Connecting to an HD Receiver, DVD, or 50 VCR Player

 HDMI Connection 50 Connecting to a PC 50

 RGB Connection 50 51 Connecting to the AV INPUT

 Component Connection 52 52 Connecting to Headphones MAINTENANCE Cleaning the Projector

 Cleaning the Lens

 Cleaning the Projector Case How to Fix the Lens Cap SPECIFICATIONS 53 53 53 53 53 54 Contents LICENSES SAFETY INSTRUCTIONS 2 3 10 PREPARATION 10 Accessories 11 Optional Extras 12 Parts and Components 13 Installation

13

 Projection Distance per Screen Size 14

 How to Install the Projector Using a 15 15

 Kensington Security System Installation Precautions Tripod REMOTE CONTROL USING THE PROJECTOR Watching Projector

 Turning on the Projector

 Focus and Position of the Screen Image

 Watching Projector Using Additional Options

 Adjusting Aspect Ratio

 Using the Keystone Function

 Using the Input List

 Blank Function Using the Quick Menu 16 18 18 18 18 18 19 19 20 20 21 21 ENTERTAINMENT 22 MY MEDIA 22

 Connecting USB Storage Devices 22

 MOVIE LIST 24

 PHOTO LIST 30

 MUSIC LIST 32

 FILE VIEWER 34 10 PREPARATION PREPARATION Accessories Check enclosed accessories. The picture may be different from an actual product. MARK 3D L / R PAGE VOL SETTINGS Remote Control AAA battery Owner's Manual CD Owner's manual Computer Cable Composite Gender AC-DC Adaptor Power Cord Lens Cap, Strap Pouch, Bag

y When connecting a cable to the HDMI or USB port, it may not be connected properly if the size of jack to the USB/HDMI port is too big. Use a standard sized jack. PREPARATION 11 Optional Extras To purchase optional extras, visit an electronics store or online shopping site or contact the retail store where you purchased the product. Without prior notice, optional extras are subject to change in order to improve the per-

formance of the product, and new accessories may be added. Screen for Projector Tripod HDMI Cable Video Cable Audio Cable 3D glasses

(DLP-LINK or DLP-

Ready Type) RGB to Component cable 12 PREPARATION Parts and Components

* The projector is manufactured using high-precision technology. You may, however, see tiny black dots and/or bright colored dots (red, blue or green) that continuously appear on the projector screen. This is a normal result of the manufacturing process and does not indicate a malfunction. Back

Control Panel

L O M V V O L

Vent1 Speaker Lens2 Speaker Focus ring Button

(Power) M (Menu)

(OK)

Description Turns the projector on or off. Selects or closes menus. Adjusts functions of menus. Checks present mode and saves function changes. 1 Due to the high temperature air coming out of the vents, do not get close to the vents. 2 Do not touch the lens when using the projector or opening the lens cap. The lens may be damaged. PREPARATION 13

y Do not place the projector in a hot or humid environment.

- Do not place the projector in a hot, cold, or humid environment.

(See54Page regarding operating temperature and humidity.)

y Do not place the projector in a place where it will easily attract dust.

- This may cause a fire.

y Do not remove any covers except for the lens cap. There is a high risk of electric shock.

y The projector is manufactured using high-precision technology. You may, however, see tiny black dots and/

or bright colored dots (red, blue or green) that continuously appear on the projector screen. This is a normal result of the manufacturing process and does not indicate a malfunction.

y The remote control may not work in an environment where a lamp equipped with electronic ballasts or a three-wavelength fluorescent lamp is installed. Replace the lamp with an internationally standardized lamp for the remote control to work normally. Installation Installation Precautions

y Place the projector in a well-ventilat-

ed environment.

- To prevent internal heat from build-

ing up, install the projector in a well-

ventilated place. Do not place anything near the pro-

jector as this may block its air vents. If the air vents are blocked, the inter-

nal temperature will increase.

- Do not place the projector on a car-

pet or rug. If a projector model has its inlet vent on its bottom, do not block the vent and use the projector on a leveled solid surface.

- Be sure to prevent foreign objects such as paper debris from entering the projector.

- Leave an adequate distance (30 cm or more) around the projector. 14 PREPARATION Projection Distance per Screen Size 1 Place the projector on a sturdy, level surface, together with the PC or audio/video 2 Place the projector at an appropriate distance from the screen. The distance be-

tween the projector and the screen determines the actual size of the image. 3 Position the projector so that the lens is set at a right angle to the screen. If the projector is not set at a right angle, the image on the screen will be tilted and the image quality will be poor. If the screen image is crooked, use the Keystone function.

(see page20) 4 Connect the power cords of the projector and the connected devices to the wall source. outlet. Ratio of upward projection: 100%

DISPLAY S c r e e n H e i g h t

X

) X/2 X/2 Y/2 Y/2 S c r e e n W d t h

Y

) i DISPLAY 5 1 m m Projection distance (D) Projection distance (D) Screen Size (mm) Screen Width (Y) (mm) Screen Height (X) (mm) 16:10 Screen 508 635 762 889 1016 1143 1270 1397 1524 1651 1778 1905 2032 2159 2286 2413 2540 431 538 646 754 861 969 1077 1185 1292 1400 1508 1615 1723 1831 1938 2046 2154 269 337 404 471 539 606 673 741 808 875 943 1010 1077 1145 1212 1279 1347 Projection Distance (D)

(mm) 594 748 902 1056 1210 1365 1520 1674 1828 1983 2137 2291 2445 2600 2755 2909 3063 PREPARATION 15 How to Install the Projector Using a Tripod

y You can install this projector using a camera tripod. As shown below, you can mount the projector instead of a camera on the tripod.

y When stabilizing the tripod, we recommend using the locking bolt of standard size 4.5 mm or less. The maximum size allowed for the locking bolt is 5.5 mm. (If it is longer than the maximum allowed size, it may damage the projector.) Bottom side of the projector Bolt used to x the projector

The projector is connected to this part. Tripod Kensington Security System

y This projector has a Kensington Security System Connector on the panel. Connect a Kensington Security System cable as below.

y For detailed installation and use of the Kensington Security System, refer to the users guide included with the Kensington Security System set.

y The Kensington Security System is an optional item.

y What is Kensington?

Kensington is a company that sells security systems that prevent expensive elec-

tronic equipment such as a computer or laptop from being stolen. Internet Homepage: http://www.kensington.com 16 REMOTE CONTROL REMOTE CONTROL Open the battery cover on the back of the remote control and insert the specied batteries as per instructions same type of batteries (1.5 V AAA) must be used. These must also be new batteries. The CAUTION

y Do not mix a new battery with an old battery. MARK 3D L / R PAGE VOL SETTINGS POWER Turns the projector on or off. USB/MY MEDIA Accesses MY MEDIA. INPUT Changes the input source. Playback Control Buttons Controls playback of MY MEDIA. MARK Shows Favorite Channels. Key's Adjusts Keystone. SLEEP Sets the length of time until the projector turns off. PICTURE Changes the picture mode. 3D Shows 3D images. L/R Switches left and right in 3D mode. VOL Adjusts the volume level. RATIO Resizes an image. BLANK Turns the projector screen on or off. MUTE Mutes all sounds. PAGE Moves to the previous or next screen. MARK 3D L / R PAGE VOL SETTINGS REMOTE CONTROL 17 SETTINGS Selects or closes menus. STILL Freezes the moving image.

(Available in any mode other than DivX) Q.MENU Accesses the quick menu. Up/Down/Left/Right Buttons Adjusts functions of menus. OK Checks present mode and saves function changes.

Returns to the previous level. AUTO Automatically adjusts the PC input image. EXIT Clears all on-screen displays and returns to projector viewing. Color buttons Access special functions in some menus. NOTE

y When using the remote control, the optimal remote range is less than 6 me-

ters (left/right) and within a 30 degree arc of the IR receiver.

y If cables are connected, the remote range is less than 3 meters (left/right) and within a 30 degree arc of the IR receiver.

y For seamless operation, do not block the IR receiver.

y When you carry the remote control in the portable bag, make sure that the buttons on the remote control are not pressed by the projector, cables, documents or any other accessories in the bag. Otherwise, it may significantly reduce the battery life.

L O M V V O L

30 30 MARK 3D L / R PAGE VOL SETTINGS Watching Projector 1 In Standby mode, press the POWER button to turn the projector on. 2 Press the INPUT button and select the input signal you want. 3 Control the projector using the fol-

lowing buttons while watching projec-

tor. Button VOL -, +

MUTE Q.MENU Description Adjusts the volume level. Mutes all sounds. Accesses the quick menu.

(see page21) Resizes an image. RATIO Key'sS,T Adjusts Keystone. (see page20) 4 To turn the projector off, press the POWER button. 18 Using the PROJECTOR Using the PROJECTOR Watching Projector Turning on the Projector 1 Connect the power cord correctly.

y Check if the lens cap is open before turning on the projector. 2 After waiting for a moment, press the POWER button on the remote control or the control panel.

(The light on the control panel will be turned on.)

y Select an input signal by using the INPUT button on the remote con-

trol. 3 In the Language Selection screen, select a language. Focus and Position of the Screen Image When an image appears on the screen, check if it is in focus and ts the screen properly. Focus ring

y To adjust the focus of the image, rotate the focus ring. Using the PROJECTOR 19

- 4:3: Resizes images to the 4:3 aspect ratio.

- Zoom: Enlarges an image to t the screen width. The top and bottom of the image may be truncated.

y Press the or button to zoom in or out of the image.

y Press the or button to move the image.

- Cinema Zoom: Formats an image to the cinemascope ratio, 2.35:1. It ranges from 1 to 16.

y Press the or button to zoom in or out of the image.

y Press the or button to move the image. NOTE

y If you enlarge or reduce an image, the image may be distorted. Using Additional Options Adjusting Aspect Ratio Resize an image to view at its optimal size by pressing RATIO while you are using the projector. NOTE

y Some options may not be available depending on input signals.

y You can also change the image size by pressing Q.MENU or SETTINGS.

- FULL: Changes to the full screen regardless of the aspect ratio.

- 16:9: Resizes images to t the screen width.

- Just Scan: Displays video images in the original size without cutting off the edges. NOTE

y If you select Just Scan, you may see image noises at the edge or edges of the screen.

- Set By Program: Displays images in the same aspect ratio as the original image. 20 Using the PROJECTOR Using the Keystone Function To prevent the screen image from becoming trapezoidal, Keystone adjusts the top and bottom width of the image if the projector is not set at a right angle to the screen. Because the Keystone function may cause inferior screen image quality, use this function only when it is not possible to set up the projector at an optimal angle.

1 Press the Key's

or Key's button to

adjust the screen.

y Keystone can be adjusted from -40

2 Press the OK button after adjust-

to 40. ment. Using the Input List Using the Input List 1 Press the INPUT button to access the input sources.

- The connected input mode appears rst. However, AV / Component input is always activated.

2 Select an input signal using the INPUT button and the projector is switched only to the connected input mode. You can use the , , or button to switch between all the input modes. Adding an Input Label Displays which devices are connected to which input ports.

1 Press the INPUT button to access the input sources. 2 Press the BLUE button. 3 Use the or button to scroll to one of the input sources. 4 Use the or button to select one of the input labels. Using the PROJECTOR 21 Using the Quick Menu You can customize frequently used menus. 1 Press Q.MENU to access the quick menus. 2 Press the or button to scroll through the following menus and press OK. Description Resizes an image. (see page19) Changes the picture mode. (see page41) Adjusts brightness. Menu Aspect Ratio Picture Mode Energy Saving Clear Voice II Sound Mode Sleep Timer PJT Mode Turns the projected image Makes the voice from the projector crisp and clear. Set each option as de-

sired. The projector is turned off at the preset time. upside down or ips it horizontally. Disconnects a USB de-

vice. USB Device 3 Press the , , , or button to scroll through the following menus. Blank Function Using the Blank Function This function may be effective when you need to draw attention during a meeting or training. 1 Press the BLANK button, and the screen is covered by the background color. You can change the background color by referring to "Selecting a Blank Image". 2 Press any button to clear the blank function. To cover the screen temporarily, press the BLANK button on the remote control. Do not block the lens with any object while the projector is running. It may become overheated and de-

formed or even cause a re. Selecting a Blank Image 1 Press the SETTINGS button. 2 Press the , , or button to select OPTION and press the OK button. 3 Press the , , or button to select Blank Image and press the OK button. 4 Use the , , or button to move to the setting or option you want and press the OK button. 22 ENTERTAINMENT ENTERTAINMENT MY MEDIA Connecting USB Storage Devices Connect a USB memory stick as shown below. When a USB storage device is connect-

ed, the USB adjustment screen appears. You cannot write or delete data on the USB storage device. USB memory stick To disconnect the USB storage device, 1 Press the Q.MENU button. 2 Use the or button to move to USB Device and press the OK button. 3 Remove the USB device. NOTE

y After the USB storage device is disconnected, it cannot be read. Remove the USB storage device and connect it again. Tips for Using USB Devices

y Only a USB storage device is recog-

nizable.

y USB hubs are not supported.

y A USB storage device which uses its own driver may not be recognized.

y The recognition speed of a USB storage device will depend on each device.

y If a normal USB device does not work, disconnect and reconnect it. Please do not turn off the projector or unplug the USB device when the connected USB device is working. The USB device or stored files may be damaged.

y Please do not connect the USB stor-

age device that has been manipu-

lated on the PC. The projector may not operate properly or fail to play files. Use a USB storage device which contains normal music, photo, video, or document files.

y Please only use a USB storage device formatted as a FAT16, FAT32, or NTFS file system provided by Win-

dows. In case a storage device for-

matted as a different utility program is not supported by Windows, it may not be recognized.

y Please connect power to a USB stor-

age device which requires an external power supply. If not, the device may not be recognized. ENTERTAINMENT 23

y Please connect a USB storage device with a cable provided by the USB manufacturer. When you use a cable that is not provided by a USB manu-

facturer or an excessively long cable, the device may not be recognized.

y Some USB devices may not be sup-

ported or will not work properly.

y If the length of a folder or file is too long, the folder or file may not be recognized properly.

y The files in a USB storage device are sorted in the same way as Windows XP. Up to 100 English characters for a file name are allowed.

y The data of a USB device may be damaged, so it is recommended to backup any important files. Because a user is responsible for data man-

agement, the manufacturer is not responsible.

y It is recommended to use a USB memory stick which is 32 GB or less and a USB hard disk which is 1 TB or less. Any device with more than the recommended capacity may not work properly.

y If a USB storage device is not working properly, disconnect it and connect it again.

y If a USB external hard disk with the power saving function does not work, turn the hard disk off and on again to make it work properly.

y USB storage devices below USB 2.0 are supported as well. However, they may not work properly in the movie list. 24 ENTERTAINMENT MOVIE LIST In the Movie List, you can watch movies stored on the connected USB device. Tips for Playing Video Files

y Some subtitles created by a user may

y Streaming files which include GMC not work.

y Some special characters are not sup-

ported in subtitles.

(Global Motion Compensation) or Qpel (Quarterpel Motion Estimation) is not supported.

y HTML tags are not supported in sub-

y Up to 10,000 sync blocks are sup-

titles.

y Time information in a subtitle file should be arranged in ascending order to play the subtitle properly.

y Changing font and color in subtitles is not supported. ported in the subtitle file.

y Seamless playback is not guaranteed for files encoded level 4.1 or higher in H.264/AVC.

y DTS audio codec is not supported.

y Video files larger than 30 GB (Giga-

y A language which is not specified bytes) are not supported. in the subtitle languages is not supported. (see page28)

y Subtitle files of 1 MB or larger are not supported.

y The screen may suffer temporary interruptions (image stoppage, faster playback, etc.) when the audio lan-

guage is changed.

y A damaged video file may not be played properly, or some functions may not be available.

y Playing a video via a USB connection that does not support high speed may not work properly.

y A video file and its subtitle file must be located in the same folder. A video file name and its subtitle file name must be identical in order to display the subtitle properly.

y While watching a video using the movie list function, you cannot adjust the picture mode.

y Video files created with some encod-

y Trick Mode does not support other ers may not be played properly.

y Either audio or video may only be supported depending on the video or audio packet structure of a video file.

y Video files with higher resolution than the maximum supported for each frame may not be played properly.

y Video files in formats other than the ones specified above may not be played properly. functions than have index information.

if video files do not

y When playing a video file using net-

work, the Trick mode is limited to 2X speed.

y Video file names that contain special characters may not be playable. ENTERTAINMENT 25 Supported Files Extension Audio/

Video Codec Prole/Level Support Description 1080p 30) Simple Prole @ Medium Level (e.g. CIF, QVGA) Main Prole @ High Level (e.g. 1080p 30) VC-1 Advanced Prole Advanced Prole @ Level 3 (e.g. 720p 60, 1080i 60, VC-1 Simple and Main Proles WMA Standard WMA 9 Professional DivX3.11 DivX4 DivX5 DivX6 XViD Advanced Simple Prole (720p/1080i) Only les compliant with SMPTE 421M VC-1 standard can be streamed. Global motion com-

pensation or quarterpel motion estimation is not supported. Streaming using this syntax is not supported. Global motion com-

pensation or quarterpel motion estimation is not supported. Streaming using this syntax is not supported. Most of the MKV content available is encoded by the open source x264 codec. Only les compliant with SMPTE 421M VC-1 standard can be streamed. Main Prole@ Level 4.1 High Prole@ Level 4.1 (e.g. 720p60, 1080i60, 1080p30) Main Prole @Level 4.1 High Prole @Level 4.1 (e.g. 720p 60, 1080i 60, 1080p 30) Advanced Simple Prole (e.g. 720p/1080i) AAC-LC and HE-AAC Main Prole @Level 4.1 High Prole @Level 4.1

(e.g. 720p 60, 1080i 60, 1080p 30) HE-AAC-LC and HE-AAC Main Prole @Level 4.1 High Prole @Level 4.1 (e.g. 720p 60, 1080i 60, 1080p 30) Main Prole @High Level (e.g. 720p 60, 1080i 60) Simple Prole @Medium Level (e.g. CIF, QVGA) Main Prole @High Level (e.g. 1080p30) Advanced Prole @Level 3 (e.g. 720p60, 1080i60, 1080p30) AAC-LC and HE-AAC Main Prole @High Level (e.g. 720p 60, 1080i 60)

.asf

.wmv

.divx

.avi

.mp4

.m4v

.mkv

.ts

.trp

.tp

.vob

.mpg

.mpeg

.mpe Video Audio Video Audio Video Audio H.264 / AVC MPEG-1 Layer I, II MPEG-1 Layer III

(MP3) Dolby Digital H.264 /AVC MPEG-4 Part 2 AAC Video H.264 /AVC Audio HE-AAC Dolby Digital H.264 /AVC Video MPEG-2 VC-1 MPEG-1 Layer I, II MPEG-1 Layer III

(MP3) Dolby Digital AAC MPEG-1 MPEG-2 Dolby Digital MPEG-1 Layer I, II DVD-LPCM MPEG-1 MPEG-1 Layer I, II Audio Video Audio Video Audio Main Prole @High Level (e.g. 720p60, 1080i60) Only les congured properly for TS, PS or ES can be streamed. Bit rate range: within 32 kbps - 320 kbps (MP3) Subtitle format: *.smi/*.srt/*.sub (MicroDVD, SubViewer1.0/2.0)/*.ass/*.ssa/*.txt (TMPlayer)/*.psb (PowerDivX) 26 ENTERTAINMENT Browsing Movie List Play a video le stored in the connected device. 1 Connect a USB storage device. 2 Press the USB button. 3 Use the , , or button to select Movie List and press the OK button. 4 If several devices are connected, press the , , or button to select a desired device and press the OK button. 5 Use the , , or button to select the le you want and press the OK button.

Description Thumbnails Abnormal file File not supported File List Moves to the upper level folder. Current page/Total no. of folder pages Description Current page/Total no. of le pages Moves to the top level folder. Moves to the upper level folder. Exit Movie List. 6 Control playback by using the follow-

ing buttons.

Q.MENU 2SWLRQ

+LGH

([LW Setting

, Shows the current playing Description

position. Use , buttons to move forward or backward. Stops playing and returns to Movie List. Returns to normal playback. Pauses the media player. If no button is pressed on the remote control for 10 minutes after pausing, the playback is restarted.

Displays in slow motion.

Whenever this button is pressed, the playback speed is changed.

: x2, x4, x8, x16, x32 A pop-up window will appear. Option

Hides the playback bar. Press the OK button to make it appear. Returns to the Movie List screen.

ENTERTAINMENT 27 Description

y Speed: If a subtitle is not synchronized with its video, you can adjust its speed at 0.5 sec unit.

y Position: Moves the loca-

tion of a subtitle.

y Size: Changes the sub-

title font size. Turns the repeat function on or off. When it is set to off, the next le can be played sequentially if the le name is similar. Options for Movie List 1 Press the Q.MENU button. 2 Use the or button to move to a desired option and press the OK button. 3 Use , , or button to set up each item. Set Video Play Setting Subtitle Lan-

guage Setting Picture Size Audio Lan-

guage Subtitle Lan-

guage Description Repeat Selects the size of a playback screen.

y Full: Files are played in full screen mode accord-

ing to the aspect ratio of video.

y 16:9: Displays the video with the aspect ratio of 16:9.

y Just Scan: Displays the video in the original as-

pect ratio. Allows you to select the lan-

guage you want for the le with multiple audio tracks. This option is not available if the le has only one audio track. The subtitle can be turned on or off.

y Language: One of any of the available languages can be selected.

y Code Page: A character set used for a subtitle can be selected. By default, the subtitle is displayed in a language configured in OPTION Menu Language. 28 ENTERTAINMENT

y Subtitle Language Subtitle Lan-

guage Latin1 Latin2 Latin4 Latin5 Cyrillic Language French, Spanish, Catalan Basque, Portuguese, Italian, Albanian, Rhaeto-

Romanic, Dutch, German, Danish, Swedish, Norwegian, Finnish, Faeroese, Icelandic, Irish, Scottish, English Czech, Hungarian, Polish, Romanian, Croatian, Slovak, Slovenian, Servian Estonian, the Baltic languages and Latvian(Lettish) and Lithuanian, Greenlandic and Lappish English, Turkish Bulgarian, Byelorussian, Macedonian, Russian, Serbian and pre-1990(no ghe with upturn) Ukranian English, Modern Greek Greek Hebrew English, Modern Hebrew Chinese Chinese Korean Arabic English, Korean English, Arabic PICTURE Settings You can change video settings.

(Refer to "PICTURE Settings" on page 41.) AUDIO Settings You can change audio settings.

(Refer to "AUDIO Settings" on page 45.) Registering the DivX code Please check your DivX code. For more information on the registration process, visit www.divx.com/vod. After registra-

tion, your can enjoy DivX VOD content protected by the DivX DRM code. 1 In the Home menu, move to OPTION and press DivX(R) VOD.

2 Press the or button to move to Registration and press the OK but-

ton.

3 Check the DivX registration code. NOTE

y You cannot use DivX registration codes assigned to other devices. Make sure to use the DivX registra-

tion code assigned to your device.

y The video or audio les that are not converted by the standard DivX codec may be corrupted or not be played. ENTERTAINMENT 29 To deregister the DivX code Use the DivX deregistration code to deactivate the DivX DRM function. 1 In the Home menu, move to OPTION and press DivX(R) VOD. 2 Use the or button to go to Deregistration and press the OK button.

3 Select Yes. NOTE

y What is DRM

[Digital Rights Management]?

This is a technology and service that prevents the illegal use of digital contents to protect the benets and rights of the copyright owner. Files can be played after the license is veri-

ed through an online method, etc.

Description Thumbnails Abnormal file File not supported File List Moves to the upper level folder. Current page/Total no. of folder pages Current page/Total no. of file pages Moves to the top level folder. Moves to the upper level folder. Exit 30 ENTERTAINMENT PHOTO LIST You can see the photos stored on a con-

nected device. Supported Photo Files PHOTO (*.JPEG) Baseline: 64-pixel (width) x 64-pixel

(height) - 15360-pixel (width) x 8640-pixel (height) Progressive: 64-pixel (width) x 64-pixel

(height) - 1920-pixel (width) x 1440-pix-

el (height)

y Only JPEG files are supported.

y Non-supported files are displayed in the form of an icon.

y An error message is displayed for corrupted files or file formats that cannot be played.

y Corrupted files may not be displayed properly.

y It may take some time to view high-

resolution images in full screen. Browsing Photo List 1 Connect a USB storage device. 2 Press the USB button. 3 Use the , , or button to select Photo List and press the OK button. 4 If several devices are connected, press the , , or button to select a desired device and press the OK button. 5 Use the , , or button to select the le you want and press the OK button. ENTERTAINMENT 31 Setting Description You can use the Energy Sav-

ing mode. Option A pop-up window will ap-

Hide Exit pear. Hides the menu on the full size screen.

y To see the menu, press the OK button on the remote control. Exit from full screen photo view. 6 Control playback by using the follow-

ing buttons.

6OLGHVKRZ

%*0 Q.MENU 2SWLRQ

+LGH

([LW Setting Description

Slide-

show Selects the previous or next photo. If no picture is selected, all photos in the current folder are displayed during the slide show. If some photos are selected, those photos are displayed.

y Set the time interval of the slide show in Option Set Photo View menu. BGM You can listen to music while viewing photos in full size.

y Set the BGM in Option Set Photo View menu.

Rotates photos.

y Rotates a photo 90, 180, 270, 360 clock-

wise.

y Photos cannot be rotated if their width is greater than the height of the max. supported resolu-

tion. Views the photo in full mode or original mode. Use the Up/Down/Left/

Right buttons to select a page and press the OK button.

32 ENTERTAINMENT Options for Photo List 1 Press the Q.MENU button. 2 Use the or button to move to a desired option and press the OK but-

ton. 3 Use , , or button to set up each item. Set Photo View Setting Slide speed BGM

(Back-

ground Music) Description Selects a slideshow speed. Selects a music folder for the background music.

y You cannot change the music folder while the background music is playing.

y For background music, only the folder from the same device can be se-

lected. PICTURE Settings You can change video settings.

(Refer to "PICTURE Settings" on page 41.) AUDIO Settings You can change audio settings.

(Refer to "AUDIO Settings" on page 45.) MUSIC LIST You can play audio les stored on the connected device. Supported Music Files

*.MP3 Bit rate range 32 Kbps - 320 Kbps

y Sampling rate MPEG1 Layer3: 32kHz, 44.1kHz, 48kHz

y Sampling rate MPEG2 Layer3: 16kHz, 22.05kHz, 24kHz Browsing Music List 1 Connect a USB storage device. 2 Press the USB button. 3 Use the , , , button to select Music List and press the OK button. 4 If several devices are connected, press the , , or button to select a desired device and press the OK button. 5 Use the , , or button to select the le you want and press the OK button.

Description Thumbnails Abnormal file Setting

File not supported

ENTERTAINMENT 33 Description Hides the playback bar.

y Press the OK button to make the playback bar appear. Returns to the Music List screen. Options for Music List 1 Press the Q.MENU button. 2 Use the or button to move to a desired option and press the OK but-

ton. 3 Use , , or button to set up each item. AUDIO Settings You can change audio settings.

(Refer to "AUDIO Settings" on page 45.) File List Moves to the upper level folder. Current page/Total no. of folder pages Current page/Total no. of file pages Moves to the top level folder. Moves to the upper level folder. Exit 6 Control playback by using the follow-

ing buttons.

Q.MENU 2SWLRQ

+LGH

([LW Setting

, Changes the playing position. Description Stops playing. Returns to normal playback. Pauses the media player.

Plays the previous/next file. You can use the Energy Sav-

ing mode.

Sets up the options of Music List. 34 ENTERTAINMENT FILE VIEWER You can see document les stored on a connected device. Supported File Formats XLS, DOC, PPT, TXT, XLSX, PPTX, DOCX, PDF, Microsoft Of ce 97/2000/2002/2003/2007 Adobe PDF 1.0/1.1/1.2/1.3/ 1.4

y File Viewer realigns a document, so it may look different from what is displayed on a PC.

y For documents that include images, the resolution may look lower during the realigning process.

y If the document volume is big or it has many pages, it may take longer to load the document.

y Unsupported fonts may be replaced by other fonts.

DOC

Description File List Moves to the upper level folder. Current page/Total no. of folder pages Current page/Total no. of file pages Moves to the top level folder. Moves to the upper level folder. Exit Browsing File Viewer 1 Connect a USB storage device. 2 Press the USB button. 3 Use the , , or button to select File Viewer and press the OK button. 4 If several devices are connected, press the , , or button to select a desired device and press the OK button. 5 Use the , , or button to select the le you want and press the OK button. ENTERTAINMENT 35 6 Control playback by using the follow-

ing buttons.

y Press the Go Page button to move to the previous or next page.

y Press the volume button to zoom in or zoom out. 1. Press SETTINGS.

2. Press the Up/Down/Left/Right buttons to move to Go Page or Zoom.

*R3DJH

=RRP Q.MENU 2SWLRQ

+LGH

([LW Setting Go Page Description Moves to the page you want. Use the Up/Down/Left/Right buttons to select a page and press the OK button. Zoom Views the photo in full mode or original mode. Use the Up/Down/Left/Right buttons to select a page and press the OK button. Option Sets up the options of File Viewer. Hide Hides the menu.

y Press the SETTINGS but-

Exit ton to make it appear. Returns to the File Viewer screen. 36 3D FUNCTION 3D FUNCTION 3D technology uses different video frames for each eye to add depth to the video. Before Watching 3D While Watching 3D WARNING

y If you view 3D images too closely for a long period of time, it may cause blurred vision.

y If you watch the projector or game screen for a long time with 3D glass-

es on, you may experience dizziness or eye fatigue.

y If you are pregnant, a senior citizen, intoxicated, have heart problems, or easily feel motion sickness, we rec-

ommend that you do not watch 3D images.

y Because 3D images can be recog-

nized as real, some viewers may get surprised or overexcited.

y Do not watch 3D images near fragile objects or any objects that can be knocked over easily.

y Take care not to injure yourself as you may subconsciously try to move away from the life-like 3D images.

y Prevent children of 5 years or young-

er from watching a 3D video. It may impair the development of their eyes.

y Warning about photosensitivity sei-

zures

- Some users may experience a seizure or other abnormal symptoms when they are exposed to a flash-

ing light or particular pattern from a video game or movie. If anyone in your family has a history of epilepsy or has ever experienced any kind of seizure, please consult your doctor before viewing 3D images. If you experience one of the follow-

ing symptoms while watching a 3D video, stop watching the 3D video immediately and take a rest.

- Dizziness, twitching of the eye or facial muscles, involuntary move-

ments, cramp, loss of consciousness, confusion, loss of sense of direction, or nausea. If the symptom does not disappear, please consult your doctor.

y You can reduce the risk of photosen-

sitive seizures by taking the following preventive measures.

- Take a rest of 5 - 15 mins. for every 1 hour of viewing.

- If vision varies between each eye, correct the variation before beginning to watch a 3D video.

- Ensure that the 3D video is directly in front of you, at eye level.

- You should stop watching if you experience a headache, fatigue or dizziness.

- Do not view 3D images when you are tired or ill. 3D FUNCTION 37 CAUTION

y Extra special care is required for chil-

dren watching a 3D video. When Watching 3D Video

y Watch 3D images within the optimum viewing angle and distance.

y If you are outside the viewing angle or distance, you may not be able to watch 3D images. You cannot view 3D images when you lie down.

y You may see left and right images overlapped during projector initializa-

tion after it is powered on. It may take some time for optimization.

y It may take some time for the 3D image look normal after you turn your eyes away from the screen and look back at the 3D image.

y It may flicker slightly while watching 3D images under a 3 wavelength lamp fluorescent light (50 Hz - 60 Hz) or near windows. If so, it is rec-

ommended to block the sun light with a curtain and to dim the lights.

y The 3D glasses must be DLP-LINK

(DLP Ready) type.

y You may not be able to watch 3D properly if there is an obstacle be-

tween the projector and 3D glasses.

y Install the 3D projector as far as pos-

sible from other devices. 38 3D FUNCTION Requirements for Watching 3D Images

* Optimum viewing angle: Top/Bottom/Left/Right 9 Optimum viewing distance: 3 m or less Recommended screen size: 40 inches

* Basically, Watching 3D videos should be done in dark room environments only.

* For 3D watching, set the energy saving mode to Minimum. NOTE

y The pairing with the DLP-LINK glasses is affected by the intensity of light reflected from the screen. Therefore, the pairing with DLP-LINK glasses may not work properly if the light reflected from the screen is not bright enough, such as when the surrounding area is bright, the screen is big, or the maximum energy saving mode is enabled.

y Some menus may not work while playing a 3D video.

y You can only watch a 3D video properly when the 3D video format option has been selected on the projector. To Use DLP-LINK (DLP-Ready) Type Glasses 1 While watching 3D images from the projector, press buttons on the glasses. 2 When you press the button, the glasses icker to be synchronized with the 3D im-

ages.

(The ickering is a unique operation method of DLP-LINK type glasses. It may be different depending on the glasses type.) 3 If the glasses icker or problems occur while watching 3D, rst turn the lights off to make the room darker. Contact your projector seller for queries about the glasses. 3D FUNCTION 39 Supported 3D input formats Signal Resolution Vertical Frequency (Hz) Supported 3D Formats No sound RGB-PC XGA XGA 1024x768 1024x768 120 120 Frame Sequential / Frame Alternative Frame Sequential / Frame Alternative

y The resolution supporting 3D mode is 1024x768 for HDMI and RGB input.

y Some menus may not work in 120HZ input. Watching 3D Images 1 Play supported 3D video titles. 2 For RGB-PC, you must press AUTO" on the remote control before watching 3D. 3 Press the 3D button. 4 While watching 3D images from the projector, press buttons on the glasses. 5 Press the L/R button to switch the playing direction of an image. Select a screen with better 3D display quality.

y If you press the 3D button during viewing, it returns to 2D. 6 If a 2D image is displayed on the 16:9 screen, a 3D image is also displayed at the aspect ratio of 16:9. For ratios other than 16:9, a 3D image is displayed in 4:3.

y You cannot change the screen size for 3D images. 40 CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS SETUP Menu 1 Press the SETTINGS button. 2 Use the , , or button to select a desired item and press the OK button. 3 Use the , , or button to set up a desired item and press the OK button. Menu Description PICTURE Adjusts the image quality for optimal viewing. AUDIO Adjusts the sound quality and volume level. TIME Sets the time and time-related features. OPTION Customizes the general settings. INPUT Selects the desired input source. MY MEDIA Accesses photo, music, movie, and document files. PICTURE Settings 1 Press the SETTINGS button. 2 Use the , , or button to select PICTURE and press the OK button. 3 Use the , , or button to set up a desired item and press the OK button.

- To return to the previous menu, press the button.

CUSTOMIZING SETTINGS 41

The available picture settings are described as fol-

lows. Setting Energy Saving Picture Mode CON-

TRAST BRIGHT-

NESS Horizontal Sharpness Vertical Sharpness Color Tint Adjusts brightness. Description Selects one of the preset images or customizes options in each mode for the best screen performance. You are also able to customize advanced options of each mode. Mode Vivid Maximizes the visual effect of video. Displays a crystal clear picture by enhancing contrast, brightness, and sharpness. Standard Has the contrast, brightness and sharpness at normal levels. Movie Sport Optimizes the image for movie. Optimizes the image for sports by emphasizing primary colors and dynamic actions. Optimizes the image for playing games on fast-moving screens. Adjusts the detailed image settings. Expert Increases or decreases the gradient of the video signal. GAME Adjusts the base level of the video signal to make the image brighter or darker. Adjusts the level of sharpness in the edge between the light and dark areas of the picture. The lower the level is, the softer the image looks. Adjusts the level of sharpness in the edge between the light and dark areas of the picture. The lower the level is, the softer the image looks. Adjusts the intensity of all colors. Adjusts the balance between red and green levels. 42 CUSTOMIZING SETTINGS Setting Advanced Settings Picture Reset Picture Size Picture Wizard II Screen Display

(RGB-PC) Customizes the advanced settings. Description Restores the options of each mode to the factory default. Resizes an image. By following the instructions, using the remote control, you can eas-

ily adjust the picture quality to technical standards without needing an expensive pattern device or a picture quality expert. Adjusts the picture quality of RGB-PC input. Option Resolution Available resolutions are 768 resolution

(1024x768/1280x768/1360x768, 60Hz) and 1050 resolu-

tion (1400x1050/1680x1050, 60Hz). Provides optimized picture quality by automatically calibrat-

ing the mismatch of horizontal width and picture shake caused by clashes between the internal settings of the pro-

jector and various PC graphic signals.

y You can also use the AUTO button on the remote control. Moves the image up/down/left/right. Changes the screen size. Makes the picture look clear by removing horizontal noise. Restores all the settings to the factory default. Auto Cong. Position Size Phase Initial Set-

ting Advanced Settings Setting Description Adjusts the contrast to keep it at the best level according to the brightness of the screen. Dynamic Con-

trast Dynamic Color Adjusts screen colors so that they look natural. Clear White Skin Color Makes the white area of screen look brighter and whiter. Detects the skin area of image and adjusts it to render a natural skin color. Reduces image noise. This option reduces the noise produced while creating digital video signals. Sets a gradation curve between video input and output signal. Noise Reduc-

tion Digital Noise Reduction GAMMA CUSTOMIZING SETTINGS 43 Setting Black Level Real Cinema Color Gamut Edge En-

hancer xvYCC Description Compensates the brightness and contrast of a screen to balance with the black level of the video input. Not available for RGB-PC. Provides the optimal picture quality for watching a movie. Selects the range of colors to display.

y Standard: Displays the original colors of an input signal regardless of the display features.

y Wide: Sets to use the rich colors of the display. Provides much sharper and clearer edges to the picture. Displays much richer colors. This function is enabled in Cinema, Expert for HDMI signal. Expert Pattern This is a pattern used for expert adjustment. Color Filter Accurately adjusts color and tint by ltering a specic color area of RGB space. Adjusts the overall color of the screen to suit your preference. Select Warm, Cool or Medium. In Expert mode, you can customize the options of each mode. Color Tem-

perature Gamma: Select 1.9, 2.2,or 2.4. a. Method: 2 points

- Pattern: Inner, Outer

- Contrast Red/Green/Blue, Brightness Red/Green/Blue:

Adjustable range -50 - +50. b. Method: 10 points IRE

- Pattern: Inner, Outer

- IRE (Institute of Radio Engineers) is the unit that indicates the size of the video signal and can be set as either 10, 20, 30 - 90, or 100. You can ne-tune for each setting as shown below.

- Luminance: If you set up luminance for 100 IRE, a luminance value satisfying each gamma is automatically calcu-

lated for each step from 10 IRE to 90 IRE.

- Red/Green/Blue: The adjustment range is -50 - +50. 44 CUSTOMIZING SETTINGS Setting Color Manage-

ment Description Adjusts Red/Green/Blue/Yellow/Cyan/Magenta colors. Allows an expert to adjust the tint using a test pattern. Six colors (Red/Green/

Blue/Cyan/Magenta/Yellow) can be selectively adjusted without af-

fecting other colors. You may not see colors change on a normal picture even after ad-

justment.

- Chroma Red/Green/Blue/Yellow/Cyan/Magenta, Tone Red/Green/Blue/Yellow/Cyan, Magenta:

The adjustment range is -30 - +30 each. AUDIO Settings 1 Press the SETTINGS button. 2 Use the , , , buttons to select AUDIO and press the OK button. 3 Use the , , or button to set up a desired item and press the OK button.

- To return to the previous menu, press the button. CUSTOMIZING SETTINGS 45

The available audio settings are described as fol-

lows. Setting Auto Volume Clear Voice II Makes the voice from the projector crisp and clear. Automatically adjusts the volume level. Description Balance Sound Mode Adjusts the balance of the left and right speakers. Adjusts sound. Option In nite Surround Treble Bass RESET LG's unique sound option provides 5.1 channel stereo sound from two speakers. Adjusts the treble sound. Adjusts the base sound. Resets all the sound settings to the factory default. 46 CUSTOMIZING SETTINGS TIME Settings 1 Press the SETTINGS button. 2 Use the , , or button to select TIME and press the OK button. 3 Use the , , or button to set up a desired item and press the OK button.

- To return to the previous menu, press the button.

The available time settings are described as follows. Setting Sleep Timer Auto Off Automatic Standby The projector is turned off at the preset time. Description If there is no signal, the projector automatically turns off after the preset time has elapsed. If there is no input for the preset time, the projector automatically goes to standby mode. OPTION Settings 1 Press the SETTINGS button. 2 Use the , , or button to select OPTION and press the OK button. 3 Use the , , or button to set up a desired item and press the OK button.

- To return to the previous menu, press the button.

The available option settings are described as fol-

lows. CUSTOMIZING SETTINGS 47

Description Setting Language Selects a desired Menu Language. PJT Mode Auto Keystone Turns the projected image upside down or ips it horizontally. Auto Keystone provides a rectangular screen image by automatically adjusting the Keystone number when there is a trapezoidal screen image caused by tilting of the projector. Option ON Off Automatically adjusts the Keystone number. Manually adjusts the Keystone number. Keystone To prevent the screen image from becoming trapezoidal, Keystone adjusts the top and bottom width of the image if the projector is not set at a right angle to the screen. Selects a background for blank Image. (see page21) Blank Image 3D Mode Selects 3D mode. Auto Input Search Automatically searches and displays an input signal type when it is re-

ceived. 48 CUSTOMIZING SETTINGS Setting Auto Power High Altitude Caption DivX(R) VOD Initial Setting Description Makes the projector turn on automatically when the adaptor plug is in-

serted. Option On When the DC plug is connected to the projector, it turns on automatically. When the DC plug is connected to the projector, it goes into standby mode. Off If the projector is used at an altitude higher than 1200 meters, turn this on. Otherwise, the projector may overheat or its protection function may be activated. If this happens, turn the projector off and then on again after waiting for several minutes. You can select a desired language when a broadcasting company sends out digital multilingual signals and the selected language is displayed as a default when the projector is turned on or the channel is changed. If there is no information for a selected foreign language, it is displayed in English instead. Digital Subtitle Settings (For digital broadcasting) Size Selects the size of a subtitle. Text Color Selects the color of a subtitle. Text Opacity Selects the transparency of a subtitle. Bg Color Selects the background color of a subtitle. Bg Opacity Selects the transparency of a subtitle background. sets DivX related settings. Resets all the projector settings to the factory default. MAKING CONNECTIONS 49 MAKING CONNECTIONS You can connect various external devices to the ports on the projector. Computer/Notebook DVD Video Digital Device USB Headphones HDMI - 50Page Component - 52Page INPUT (AV) - 51Page RGB - 50Page Memory - 22Page AUDIO - 52Page Game Console 50 MAKING CONNECTIONS Connecting to an HD Receiver, DVD, or VCR Player Connect an HD receiver, DVD, or VCR player to the projector and select an ap-

propriate input mode. HDMI Connection With an HDMI cable, you can enjoy high quality picture and sound. Press the INPUT button on the remote control to select HDMI. Connecting to a PC The projector supports Plug & Play. A PC will automatically recognize the projector and requires no driver to be installed. RGB Connection Connect the PC output and the PC video input port of the projector with the RGB cable. For audio signal, connect the PC and the projector with an optional audio cable. V O L

Accessories Optional Extras

MAKING CONNECTIONS 51 Connecting to the AV INPUT Connect the output ports of an external device and the AV INPUT port of the projector. Press the INPUT button to select AV.

RGB OUT (PC) AUDIO OUT You can connect the audio cable without using a gender as shown in the illustra-

tion above.

52 MAKING CONNECTIONS Component Connection You can enjoy vivid images when you connect an external device with a RGB IN port to the component port of the projector. Press the INPUT button on the remote control to select Component. Connecting to Headphones You can listen to the audio through a headphone.

MAINTENANCE 53 How to Fix the Lens Cap 1 Prepare the lens cap and the strap supplied as accessories. 2 Insert the end of the strap into the hole at the bottom of the lens section of the projector. Fix the strap to the projector by inserting and pulling the other end of the strap into the other end. 3 Insert the other end of strap into the hole of the lens cap, and then pass the lens cap through the strap. MAINTENANCE Clean your projector to keep it in opti-

mum condition. Cleaning the Projector Cleaning the Lens If there is any dust or staining on the lens surface, you must clean the lens. Use an air spray or a cleaning cloth to clean the lens. To remove dust or stains, use an air spray or apply a small amount of clean-

ing agent onto a swab or soft cloth to lightly rub the lens. Please be aware that liquid may ow onto the lens if the product is sprayed directly onto the lens. Cleaning the Projector Case To clean the projector case, rst unplug the power cord. To remove dust or stains, use only a dry, lint-free, nonabrasive cloth to polish the lens. Do not use alcohol, benzene, thinners or other chemicals, which may damage the case. 54 SPECIFICATIONS SPECIFICATIONS MODELS Resolution (Pixel) Aspect ratio Panel size (mm) Projection distance

(Video size) Ratio of upward projection Working range of the remote control Video input AC-DC Adaptor Audio Output Height (mm) Width (mm) Depth (mm) Weight (g) USB Device Operation environ-

ment PA70G (PA70G-JE) 1280 (Horizontal) 800 (Vertical) 16:10 (Horizontal:Vertical) 11.623 0.64 m - 3.25 m (50.8 cm - 254.0 cm) 100 %

6 m NTSC M / PAL-B, D, G, H, I / PAL M / PAL N / PAL 60 19.5 V

3W + 3W Front Side Rear Side 56.5 (without foot), 60.0 (with foot) 44.0 (without foot), 47.5 (with foot) 230.0 170.0 1250 5 V, 0.5 A (Max.) 0C - 40C

-20C - 60C 0 % - 80%

0 % - 85%

Temperature Operation Storage Relative Humidity Operation Storage Supported Monitor Display Open Source Software Information SPECIFICATIONS 55 To obtain the source code under the GPL, LGPL, MPL and other open source licenses, which is contained in this prod-

uct, please visit http://opensource.lge.com. In addition to the source code, all re-

ferred license terms, warranty disclaim-

ers and copyright notices are available for download. If you send an email to opensource@lge. com to request for the softwares open source code installed into the projector within three years of purchase, we will send you a CD-ROM. You will only be charged a minimum for packaging and delivery. Resolution 640*350 Horizontal Frequency Vertical Frequency

(kHz) 31.468

(Hz) 70.09 70.08 59.94 60.31 60.00 60.053 720*400 640*480 800*600 1024*768 1152*864 1280*800 1360*768 1280*1024 1400*1050 1680*1050

y If an invalid signal is input into the 31.469 31.469 37.879 48.363 54.348 49.68 47.712 63.981 65.317 65.3 60.015 60.020 59.979 60 60 projector, it will not be displayed properly on the screen or a message such as No Signal or Invalid Mode will be displayed.

y The projector supports the DDC1/2B type as the Plug & Play function (Auto-recog-

nition of PC monitor).

y PC synchronization signal types sup-

ported: Separate type synchronization.

y In PC mode, 1280x800 is recommended for the best picture quality. The model and serial number of the projec-

tor are located on the back or on the side of the projector. Record them below should you ever need service. MODEL SERIAL