all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
useman | Users Manual | 1.69 MiB | June 16 2020 / July 31 2020 | delayed release | ||
1 |
|
intpho | Internal Photos | 4.21 MiB | June 16 2020 / July 31 2020 | delayed release | ||
1 |
|
extpho | External Photos | 268.56 KiB | June 16 2020 / July 31 2020 | delayed release | ||
1 |
|
label | ID Label/Location Info | 230.72 KiB | June 16 2020 | |||
1 | Schdia | Schematics | June 16 2020 | confidential | ||||
1 |
|
Testreport | Test Report | 2.62 MiB | June 16 2020 | |||
1 |
|
Tsup | Test Setup Photos | 227.60 KiB | June 16 2020 / July 31 2020 | delayed release | ||
1 | opedec | Operational Description | June 16 2020 | confidential | ||||
1 | Block Diagram | Block Diagram | June 16 2020 | confidential | ||||
1 |
|
Cover Letter - Agency Authorization | Cover Letter(s) | 166.72 KiB | June 16 2020 | |||
1 |
|
SCS-F19 Confidentiality Request Letter (Ver 6.0) | Cover Letter(s) | 38.63 KiB | June 16 2020 |
1 | useman | Users Manual | 1.69 MiB | June 16 2020 / July 31 2020 | delayed release |
Order Number
: GETEC-C1-20-016 Test Report Number
: GETEC-E3-20-001 FCC Part 18 Page 1 / 1 APPENDIX H
: USERS MANUAL EUT Type: HOUSEHOLD ELECTRIC RANGE FCC ID.: BEJS47423E E N G L S H I E S P A O L OWNERS MANUAL ELECTRIC INDUCTION RANGE Read this owners manual thoroughly before operating the appliance and keep it handy for reference at all times. LSIS3018SS MFL68881515_01 www.lg.com Copyright 2019 - 2020 LG Electronics Inc. All Rights Reserved. 2 TABLE OF CONTENTS TABLE OF CONTENTS 3 IMPORTANT SAFETY INSTRUCTIONS 10 PRODUCT OVERVIEW 10 Parts 10 Accessories 11 INSTALLATION Installation Overview 11 11 Product Specifications 12 Before Installing the Range 13 Installing the Range 15 Connecting Electricity 19 Engaging the Anti-tip Device 19 Optional Rear Filler 20 Test Run 21 OPERATION 21 Control Panel Overview 22 Knob Positions 23 Changing Oven Settings 23 Clock 23 Lockout 23 Minimum & Maximum Default Settings 24 Timer On/Off 24 Wi-Fi 24 Settings
- Setting the Hour Mode
- Setting Convection Auto Conversion
- Adjusting the Oven Temperature
- Turning the Preheat Alarm Light On/Off
- Adjusting the Oven Beeper Volume
- Selecting Fahrenheit or Celsius
- Turning the Cooktop Beeper On/Off 26 Start Time (Delayed Timed Cook) 26 Cook Time (Timed Cook) 26 Oven Light 27 Using the Cooktop 27 Cooking Areas 27 Benefits of Induction Surface Cooking 27 Induction Cookware 28 Cookware Placement 28 Moving Cookware on the Cooktop 28 Pan Sensing 29 Minimum and Maximum Pan Size 29 Hot Cookware and Residual Heat 29 Home Canning 30 Setting Surface Controls 30 Hot Surface Indicator 30 Using the Cooking Elements 31 The Recommended Surface Cooking Setting 31 Pan Preheat Recommendations 31 Noises during Cooktop Operation 32 Power Management 32 Warming Zone 33 Using the Oven 33 Before Using the Oven 33 Oven Vent 33 Using Oven Racks 33 Bake 34 Convection Mode 35 Recommended Baking and Roasting Guide 36 Broil 37 Recommended Broiling Guide 38 Warm 38 Proof 38 Speed Roast 39 Meat Probe 40 Remote Start 40 Sabbath Mode 41 Operating the Warming Drawer 42 GlideShutDrawer 43 SMART FUNCTIONS 43 LG ThinQ Application 45 FCC Notice 45 FCC RF Radiation Exposure Statement 46 Smart Diagnosis Feature 47 MAINTENANCE 47 Cleaning the Glass-Ceramic Cooktop 48 EasyClean 51 Self Clean 53 Changing the Oven Light 53 Cleaning the Exterior 54 Removing and Replacing the Lift-Off Oven Doors and Drawer 55 Door Care Instructions 56 TROUBLESHOOTING 56 FAQs 58 Before Calling for Service 62 LIMITED WARRANTY IMPORTANT SAFETY INSTRUCTIONS 3 IMPORTANT SAFETY INSTRUCTIONS Read and follow all instructions when using the range to prevent the risk of fire, electric shock, personal injury, or damage. This guide does not cover all possible conditions that may occur. Always contact your service agent or manufacturer about problems that you do not understand. E N G L S H I Download this owner's manual at: http://www.lg.com This is the safety alert symbol. This symbol alerts you to potential hazards that can result in property damage and/or serious bodily harm or death. All safety messages will follow the safety alert symbol and either the word WARNING or CAUTION. These words mean:
WARNING - Indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION - Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. ANTI-TIP DEVICE WARNING
TO REDUCE THE RISK OF TIPPING, THE APPLIANCE MUST BE SECURED BY A PROPERLY INSTALLED ANTI-TIP DEVICE. TO CHECK IF THE DEVICE IS INSTALLED PROPERLY, REMOVE THE DRAWER BODY AND VERIFY THAT THE ANTI-TIP DEVICE IS ENGAGED, OR GRASP THE TOP REAR EDGE OF THE RANGE BACK GUARD AND CAREFULLY ATTEMPT TO TILT IT FORWARD. Refer to the installation section for instructions.
It is possible for a child or adult to tip the range and be killed.
Verify that the anti-tip device has been properly installed and attached to the floor or wall and engaged to the leveling leg of the range.
Do not operate the range without the anti-tip device in place and engaged.
Never remove the oven legs. The range will not be secured to the anti-tip bracket if the legs are removed.
Do not step or sit on the oven door. The range could be tipped and injury might result from spilled hot liquid, food, or the range itself.
Do not rest large, heavy items such as whole turkeys on the open oven door. The range could tip forward and cause injury.
Reengage the anti-tip device after pulling the range out for cleaning, service, or any other reason. Anti-tip bracket Leveling leg
Failure to follow these instructions can result in death or serious burns to children or adults. 4 IMPORTANT SAFETY INSTRUCTIONS SAFETY PRECAUTIONS
DO NOT TOUCH HEATING ELEMENTS OR INTERIOR SURFACES OF OVEN. Heating elements may be hot even though they are dark in color. Interior surfaces of an oven become hot enough to cause burns. During and after use, do not touch or let clothing or other flammable materials contact heating elements or interior surfaces of oven until they have had sufficient time to cool. Other surfaces, such as oven vent openings and surfaces near these openings, oven doors, and windows of oven doors, also get hot and may cause burns if not cooled.
Use care when opening door. The hot air and steam that escape can cause burns to hands, face and eyes. Let hot air or steam escape from the oven before removing or replacing food in the oven.
Do not repair or replace any part of the appliance unless specifically recommended in the manual. All other servicing should be performed by a qualified technician.
Do not use harsh etching, abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface. Scratches may cause the glass to shatter. WARNING If the door glass, cooktop glass, surface, or oven heating unit of the range are damaged, discontinue use of the range and call for service.
Do not operate the oven without the charcoal heater mesh.
Do not use plastic to cover food. Use foil or oven-safe lids only.
Do not allow anyone to climb, stand or hang on the door, storage drawer or cooktop. They could damage the range and even tip it over, causing severe personal injury.
Do not line the oven walls, racks, bottom, or any other part of the oven with aluminum foil or any other material. Doing so will disrupt heat distribution, produce poor baking results and cause permanent damage to the oven interior (aluminum foil will melt to the interior surface of the oven)
Never attempt to dry a pet in the oven.
Never use your appliance for warming or heating the room.
Always use pot holders or oven mitts when removing food from the oven or the surface element. Cookware will be hot. Use only dry pot holders. Moist or damp pot holders on hot surfaces may result in burns from steam. Do not let the pot holder touch hot heating elements. Do not use a towel or other bulky cloth to remove food.
Do not heat unopened food containers. Pressure in the containers may cause them to burst which may result in injury.
Before using Wi-Fi functions, open the oven door and make sure the oven is ready for pre-
heating.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
If the range is placed on a base, measures must be taken to prevent the appliance from
To avoid the product overheating, do not install a decorative panel on the front of the slipping off of the base. appliance.
To eliminate the risk of burns or fire by reaching over heated surface units, cabinet storage space located above the surface units should be avoided. If cabinet storage is to be provided, the risk can be reduced by installing a range hood that projects horizontally a minimum of 5 inches beyond the bottom of the cabinets. IMPORTANT SAFETY INSTRUCTIONS 5 E N G L S H I FLAMMABLE MATERIALS WARNING Remove all packing materials from the appliance before operating. Keep plastic, clothes, paper, and other flammable materials away from parts of the appliance that may become hot.
Do not store or use flammable material in the oven or near or on the cooktop. Flammable materials include paper, plastic, pot holders, linens, wall coverings, curtains, and gasoline or other flammable vapors and liquids such as grease or cooking oil. These materials can be ignited when the oven and cooktop are in use.
Wear proper apparel. Do not wear loose-fitting or hanging garments, which may ignite if they contact hot surfaces, and cause severe burns.
Do not use the oven for drying clothes. Only use the oven for its intended purpose.
If cabinet storage is provided directly above cooking surface, place items that are not frequently used and can be safely stored in an area subjected to heat. Temperatures may be unsafe for volatile items such as flammable liquids, cleaners or aerosol sprays. ELECTRICAL SAFETY
Always disconnect power from the appliance before servicing.
Do not use aluminum foil or any other material to line the oven bottom. Improper installation of these liners may result in a risk of electric shock or fire.
Do not allow aluminum foil or the temperature probe to contact heating elements.
Be sure your range is installed and grounded properly by a qualified installer or service technician. WARNING Before replacing the oven light bulb, switch off the electrical power to the oven at the main fuse or circuit breaker panel. Failure to do so can result in severe personal injury, death, or electrical shock. DEEP FAT FRYER
Use extreme caution when moving or disposing of hot grease.
Always heat fat slowly, and watch as it heats.
If frying combinations of oils and fats, stir them together before heating.
Use a deep fat thermometer, if possible, to prevent overheating fat beyond the smoking point.
Use the least possible amount of fat for effective shallow or deep-fat frying. Filling the pan with too much fat can cause spillovers when food is added. CHILD SAFETY
Do not touch the hot surface between the bottom of the oven door and the top of the drawer on the front of the oven while the oven is in operation. The surface becomes hot and can cause burns and other injury.
Do not leave small children unattended near the oven. 6 IMPORTANT SAFETY INSTRUCTIONS WARNING CAUTION WARNING Do not leave children alone or unsupervised near the appliance when it is in use or is still hot. Children should never be allowed to sit or stand on any part of the appliance as they could be injured or burned. Do not store items of interest to children in cabinets above a range or on the back guard of a range children climbing on the range to reach items could be seriously injured.
Never let a child hang on the oven door.
Do not allow children to crawl into the oven.
Let hot utensils cool in a safe place, out of reach of small children.
Children should be supervised to ensure that they do not play with the appliance.
The appliance and its accessible parts become hot during use. Do not touch heating elements inside the oven. Young children must be continuously supervised if allowed near the appliance.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Do not allow children to play with the appliance. Any cleaning and user maintenance performed by children must be supervised. GLASS-CERAMIC COOKING SURFACE
Surface units may be hot even though they are dark in color. Areas near surface units may become hot enough to cause burns. During and after use, DO NOT TOUCH SURFACE UNITS OR AREAS NEAR UNITS or let clothing or other flammable materials contact surface units or areas near units until they have had sufficient time to cool. This includes the cooktop and the area above the oven door.
Do not cook on a broken cooktop. If the cooktop is broken, cleaning solutions and spillovers may penetrate the broken cooktop and create a risk of electric shock. Switch off the appliance to avoid the possibility of electric shock and contact a qualified technician immediately.
Do not use the glass cooktop surface as a cutting board.
Do not place or store items that can melt or catch fire on the glass cooktop, even when it is not being used.
Choose proper burner size. For smaller pots and pans, use the smaller heating elements. For larger pots and pans, use the larger heating elements. Select pans that have flat bottoms large enough to cover the heating elements. Using undersized pans exposes a portion of the heating element to direct contact and may result in clothing burning.
Glazed cookware. Only certain types of glass, glass-ceramic, ceramic, earthenware, or other glazed cookware are suitable for range-top service without breaking due to the sudden change in temperature.
Never cook directly on the glass. Always use cookware.
Always turn the surface units off before removing cookware. Do not rely on the pan sensor. IMPORTANT SAFETY INSTRUCTIONS 7 WARNING Do not leave fats or oils to heat unattended on the cooktop. Spillovers can result in a fire. E N G L S H I
The cooktop is not intended to be operated by means of an external timer or separate remote-control system.
Turn cookware handles inward so they don't extend over adjacent surface units. This reduces the risk of burns, ignition of flammable materials, and spillage due to unintentional contact with the cookware.
Immediately clean spills on the cooking area to prevent a tough cleaning chore later.
Some cleaners can produce dangerous fumes if applied to a hot surface.
Do not place metallic objects such as knives, forks, spoons, and lids on the cooktop surface, because they can get hot.
Always place the pan in the center of the surface unit you are cooking on. Never leave surface units unattended at high heat settings. Proper contact of cookware to burner also will improve efficiency. Boilovers cause smoking and greasy spills that may catch on fire.
Clean cooktop with caution. Do not use sponges or cloth to wipe spills on a hot cooking area. Use a proper metal scraper. If a wet sponge or cloth is used to wipe spills on a hot cooking area, it can cause steam burns. Some cleaners can produce noxious fumes if applied to a hot surface.
Do not turn surface units on before placing cookware.
Do not store heavy items above the cooktop surface that could fall and damage it.
Do not place aluminum foil or plastic items such as salt and pepper shakers, spoon holders, or plastic wrappings or any other material on the range when it is in use.
Do not use a steel-wool pad or scrub pad or abrasive cleaning pads. They can scratch the surface. ENERGY SAVING TIPS
Multiple-rack cooking saves time and energy. Whenever possible, cook foods requiring the same cooking temperature together in one oven.
For optimal performance and energy savings, follow the guides on page 36 for proper rack and pan placements.
Match the size of the cookware to the amount of food being cooked to save energy when heating. Heating quart of water requires more energy in a 3-quart pot than in a 1-quart pot.
Use cookware with flat bottoms to provide the best contact with the cooktop surface when cooking on the glass-ceramic cooktop.
Match the size of the cooktop burner or element to the size of the cookware in use. Using a large element for a small pan wastes heating energy, and the exposed surface of the element is a burn or fire hazard.
Reduce energy use by cleaning light oven soils with the EasyClean feature instead of self-clean.
Avoid opening the oven door more than necessary during use. This helps the oven maintain temperature, prevents unnecessary heat loss, and saves on energy use. 8 IMPORTANT SAFETY INSTRUCTIONS SAFETY DURING USE CAUTION Supervise all cooking processes. Continuously supervise quick cooking processes.
During use the appliance becomes hot. Care should be taken to avoid touching heating elements inside the oven.
Do not touch the oven racks while they are hot.
Do not block the vent opening.
Only arrange oven racks when the oven is cool.
If a rack must be moved while the oven is hot, do not let the pot holder contact the hot heating element in the oven.
Use caution with the Timed Cook or Delayed Timed Cook features. Use the automatic timer when cooking cured or frozen meats and most fruits and vegetables. Foods that can easily spoil, such as milk, eggs, fish, meat or poultry, should be chilled in the refrigerator first. Even when chilled, they should not stand in the oven for more than 1 hour before cooking begins, and should be removed promptly when cooking is complete. Eating spoiled food can result in sickness from food poisoning.
Accessible parts may become hot when the grill is in use.
Do not place food or cookware on the bottom of the oven cavity. Doing so will cause permanent damage to the oven bottom finish.
Only use the temperature probe recommended for this oven.
Do not use water on grease fires. Should an oven fire occur, leave the oven door closed and turn the oven off. If the fire continues, throw baking soda on the fire or use a fire extinguisher. Do not put water or flour on the fire. Flour may be explosive and water can spread a grease fire and cause personal injury.
Pull the oven rack to the stop-lock position when loading and unloading food from the oven. This helps prevent burns caused by touching hot surfaces of the door and oven walls.
Do not use the oven if a heating element develops a glowing spot during use or shows other signs of damage. A glowing spot indicates the heating element may fail and present a potential burn, fire, or shock hazard. Turn the oven off immediately and have the heating element replaced by a qualified service technician.
When using cooking or roasting bags in the oven, follow the manufacturers directions. SAFETY WHEN CLEANING CAUTION Remove food, cookware, racks, and accessories from the oven before operating the self-cleaning function. Remove any items placed in the bottom drawer.
Avoid touching the door, window, or oven vent area during a cleaning cycle, and keep children away from the appliance. These surfaces may get hotter than usual.
Do not use a steam cleaner to clean the oven.
Open a window or turn on a ventilation fan or hood before self-cleaning.
If the oven is heavily soiled with oil, self-clean the oven before using the oven again. The oil could cause a fire. Clean function.
Wipe up heavy soil on the bottom of the oven or the excess spillage before using the Self
Do not use oven cleaners. Commercial oven cleaner or oven liner protective coating of any kind should not be used in or around any part of the oven. IMPORTANT SAFETY INSTRUCTIONS 9
Never keep pet birds in the kitchen. The health of birds is extremely sensitive to the fumes released during an oven self-clean cycle. Fumes may be harmful or fatal to birds. Move birds to a well-ventilated room.
Clean in the self-clean cycle only parts listed in this manual. Before self-cleaning the oven, remove the broiler pan, all oven racks, the meat probe and any utensils or food from the oven. E N G L S H I
Important Instruction. The oven displays an F error code and sounds three long beeps during the self-cleaning process if it malfunctions in the self-clean mode. Switch off the electrical power to the main fuse or breaker and have the oven serviced by a qualified technician.
It is normal for the cooktop of the range to become hot during a self-clean cycle. Therefore, touching the cooktop during a self-clean cycle should be avoided.
Never pour cold water over a hot oven for cleaning. Doing so may cause the oven to malfunction.
Make sure oven lights are cool before cleaning.
Do not clean door gasket. The door gasket is essential for a good seal. Care should be taken not to rub, damage, or move the gasket.
If there is a fire in the oven during self-clean, turn the oven off and wait for the fire to go out. Do not force the door open. Introduction of fresh air at self-clean temperatures may lead to a burst of flame from the oven. Failure to follow this instruction may result in severe burns. COOK MEAT AND POULTRY THOROUGHLY
To protect against food-borne illnesses, cook meat and poultry thoroughly. The USDA has indicated the following as safe minimum internal temperatures for consumption:
Ground meats: 160 F
Poultry: 165 F
Beef, veal, pork, or lamb: 145 F
Fish/seafood: 145 F Glass-ceramic Oven mode knob Gasket Model & serial number plate 10 PRODUCT OVERVIEW PRODUCT OVERVIEW Parts Cooktop Cooktop controller Oven door Warming drawer Accessories Included Accessories Cleaner Optional Accessories Heavy rack (2ea) Gliding rack (1ea) Meat probe (1ea) Bottom rack (1ea) Cooktop cleaner
(1ea) Spray bottle
(1ea) Non-scratch scouring pad (1ea) Grid Broiler pan NOTE
Contact LG Customer Service at 1-800-243-0000 if any accessories are missing.
For your safety and for extended product life, only use authorized components.
The manufacturer is not responsible for product malfunction or accidents caused by the use of separately purchased, unauthorized components or parts.
The images in this guide may be different from the actual components and accessories, which are subject to change by the manufacturer without prior notice for product improvement purposes. INSTALLATION Installation Overview Please read the following installation instructions first after purchasing this product or transporting it to another location. INSTALLATION 11 E N G L S H I Black White Red Terminal block Conduit connection plate Check and choose the Install anti-tip device Level the range Connect electric range proper location 240 V or 208 V Plug in the power cord Engage the anti-tip device Test run Product Specifications The appearance and specifications listed in this manual may vary due to constant product improvements. Oven Range Models LSIS3018SS Description Electric Induction Slide In Oven Range Electrical requirements 12.1 kW 120/240 VAC or 10.2 kW 120/208 VAC Exterior Dimensions 29 7/8" (W) x 37 7/8" (H) x 26 1/2" (D) (D with door closed) 75.7 cm (W) x 96 cm (H) x 67.3 cm (D) (D with door closed) Height to cooking surface 36" (91.4 cm) Net weight Total capacity 198.4 lb (90.0 kg) Total cap.: 6.3 cu. ft. If you did not receive an anti-tip bracket with your purchase, call 1-800-243-0000 to receive one at no cost. WARNING
The information in this manual should be followed exactly. Failure to do so may result in fire, electrical shock, property damage, personal injury, or death.
Wear gloves during the installation procedure. Failure to do so can result in bodily injury. 12 INSTALLATION Before Installing the Range WARNING Tip - Over Hazard A child or adult can tip the range and be killed. Verify the anti-tip bracket has been installed. Ensure the anti-tip bracket is engaged when the range is moved. Do not operate the range without the anti-tip bracket in place. Failure to follow these instructions can result in death or serious burns to children and adults. To check that leveling leg is inserted into anti-tip bracket, grasp the top rear edge of the range and carefully attempt to tilt it forward. Anti-tip bracket Leveling leg Tools Needed Phillips screwdriver Flat-blade screwdriver 5/16" Nut driver Pliers Tape measure Level Adjustable wrench Drill Safety glasses Gloves Parts Provided Parts not Provided Template (1) Anti-tip bracket kit (1)
4-Wire cord or 3-Wire cord Strain relief
(For conduit
(UL approved 40 or 50 Installations only) AMP) Anchor sleeves (6) Lag bolts (6) NOTE
Observe all governing codes and ordinances.
Have the installer show you the location of the circuit breaker or fuse. Mark it for easy reference.
As when using any appliance generating heat, there are certain safety precautions you should follow.
Be sure your range is installed and grounded properly by a qualified installer or service technician. Installing the Range Choosing the Proper Location Unpacking and Moving the Range CAUTION E N G L S H I INSTALLATION 13 CAUTION
Use two or more people to move and install the range. (Excessive Weight Hazard) Failure to do so can result in back or other injury.
Do not use the door handles to push or pull the range during installation or when moving the range out for cleaning or service. Doing so can result in serious damage to the door of the range. Remove packing material, tape and any temporary labels from your range before using. Do not remove any warning-type labels, the model and serial number label, or the Tech Sheet that is located on the back of the range. To remove any remaining tape or glue, rub the area briskly with your thumb. Tape or glue residue can also be easily removed by rubbing a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry. Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your range. Your range is heavy and can be installed on soft floor coverings such as cushioned vinyl or carpeting. Use care when moving the range on this type of flooring. Use a belt when moving the range to prevent damaging the floor. Or slide the range onto cardboard or plywood to avoid damaging the floor covering.
Avoid placing cabinets above the range. To minimize the hazard caused by reaching over the open flames of operating burners, install a ventilation hood over the range that projects forward at least five inches beyond the front of the cabinets.
Make sure wall covering, countertop and cabinets around the range can withstand the heat (up to 194 F) generated by the range. Discoloration, delamination or melting may occur. This range has been designed to comply with the maximum allowable wood cabinet temperature of 194 F.
Before installing the range in an area covered with linoleum or other synthetic floor covering, make sure the floor covering can withstand temperatures of at least 200 F (93 C).
Use an insulated pad or 1/4 in. (0.64 cm) plywood under the range if installing the range over carpeting. The range should always be plugged into its own individual properly grounded electrical outlet. This prevents overloading house wiring circuits which could cause a fire hazard from overheated wires. It is recommended that a separate circuit serving only this appliance be provided. Mobile Home - Additional Installation Requirements The installation of this range must conform to the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD Part 280), or when such standard is not applicable, the Standard for Manufactured Home Installations, ANSI A225.1/NFPA 501A or with local codes.
When this range is installed in a mobile home, it must be secured to the floor during transit. Any method of securing the range is adequate as long as it conforms to the standards listed above.
A four-wire power supply cord or cable must be used in a mobile home installation. 14 INSTALLATION Dimensions and Clearances NOTE Save for the use of the local electrical inspector. 3" (7.6 cm) 24"
(60.9 cm) 3" (7.6 cm) 25"
(63.5 cm) Normal counter top depth 36"
(91.4 cm) Counter top height Acceptable electrical outlet area A Cabinet opening 36"
(91.4 cm) 24"
(60.9 cm) Cabinet Wall Center 15" (38 cm) 11" (28 cm) 29.8"
(75.7 cm) 6"
(15.2 cm) 4"
(10 cm) 9"
(23 cm) 2.5" (6.3 cm) 6"
(15.2 cm) 5"
(13 cm) 9"
(23 cm) 2.5"
(6.3 cm) 4"
(10 cm) A = 30" (76.2 cm) For U.S.A 30"
(76.2 cm)
*30" (76.2 cm) Minimum
**15"
(38.1 cm) 36"
(91.4 cm) Minimum Dimensions
* 30" (76.2 cm) minimum clearance between the top of the cooking surface and the bottom of an unprotected wood or metal cabinet; or 24" (60.9 cm) minimum when bottom of wood or metal cabinet is protected by not less than 1/4"(6.4 cm) flame retardant millboard covered with not less than no. 28 MSG sheet steel, 0.015" (0.381 mm) stainless steel, 0.024" (0.610 mm) aluminum or 0.020" (0.508 mm) copper.
** 15" (38.1 cm) minimum between countertop and adjacent cabinet bottom. Installing the Anti-tip Device WARNING Tip - Over Hazard A child or adult can tip the range and be killed. Verify the anti-tip bracket has been installed. Ensure the anti-tip bracket is engaged when the range is moved. Do not operate the range without the anti-tip bracket in place. Failure to follow these instructions can result in death or serious burns to children and adults. To check that leveling leg is inserted into anti-tip bracket, grasp the top rear edge of the range and carefully attempt to tilt it forward. Anti-tip bracket Leveling leg Anti-tip bracket Wall plate Screw must enter wood or concrete Locate the anti-tip bracket using the template An anti-tip bracket is packaged with the template. The instructions include necessary information to complete the installation. Read and follow the range installation instruction sheet (template). Leveling the Range Level the range by adjusting the leveling legs with a wrench. Extending the legs slightly may also make it easier to insert the rear leg into the anti-tip bracket. INSTALLATION 15 Use a level to check your adjustments. Place the level diagonally on the oven rack, and check each direction for level. First check direction
. Then check direction on the rack, adjust the leveling legs with a wrench. If the level doesnt show level E N G L S H I 2 1 Connecting Electricity Electrical Requirements This appliance must be installed and grounded on a branch circuit by a qualified technician in accordance with the National Electrical code ANSI/NFPA NO. 70 -
latest edition. All wiring should conform to Local and NEC codes. This range requires a single-phase, 3 wire, A.C 120/208 V or 120/240 V 60 Hz electrical system. Use only a 3-conductor or a 4-conductor UL - listed range cord with closed-loop terminals, open-end spade lugs with upturned ends or similar termination. Do not install the power cord without a strain relief. A range cord rated at 40 amps with 120/240 minimum volt range is required. If a 50 amp range cord is used, it should be marked for use with 13/8"
diameter connection openings. This appliance may be connected by means of a conduit or power cord. If a conduit is being used, go to page 18 for 3 wire conduit connections or 4 wire conduit connections.
Electrical ground is required on this 13/8" (3.5 cm) Cord 16 INSTALLATION WARNING
Allow 2 to 3 ft (61.0 cm to 91.4 cm) of slack in the line so that the range can be moved if servicing is ever necessary.
The power supply cord and plug should not be modified. If it will not fit the outlet, have a proper outlet Installed by a qualified electrician.
Using an extension cord to connect the power is prohibited. Connect the power cord and plug directly. appliance.
Make sure that the power cord is not pinched by the range or heavy objects. Failure to do so can result in serious burns or electrical shock. Specified power-supply-cord kit rating Specified rating of power supply-
cord kit, amperes Diameter (inches) of Range connection Opening Power cord Conduit 40 or 50 A 1 3/8"
1 1/8"
Range rating, watts 120/240 120/208 volts volts 3-wire 3-wire 8,750 -
16,500 7,801 -
12,500 16,501 -
22,500 12,501 -
18,500 3, 4 - Wire electrical wall Receptacle 4 Wire receptacle (14-50R) 3 Wire receptacle (10-50R) Connecting the Power Cord The rear access cover must be removed. Loosen the two screws with a screwdriver. The terminal block will then be accessible. Access cover Use the cord/conduit connection plate to install the power cord or conduit. Leave the connection plate as installed for power cord installations. Remove the connection plate for conduit installations and use the smaller 11/8 in. (2.8 cm) conduit hole instead of the 13/8 in. (3.5 cm) power cord hole. 11/8" (2.8 cm) Conduit Remove the conduit connection plate For power cord installations, hook the strain relief over the 13/8 in. (3.5 cm) power cord hole located below the rear of the oven. Insert the power cord through the strain relief and tighten it. Conduit connection plate Power cord Cord/
Conduit connection plate Conduit 50 1 3/4"
1 3/8"
Assembling power cord strain relief at the 13/8" opening For conduit installations, insert the conduit strain relief in the 11/8 in. (2.8 cm) conduit hole. Then install the conduit through the body of the strain relief and fasten the strain relief with its ring. Ring Body Assembling conduit cord strain relief at the 11/8" opening 3-Wire Connection : Power Cord 4-Wire Connection : Power Cord WARNING WARNING E N G L S H I INSTALLATION 17
The middle (neutral or ground) wire, which is white, of a 3-wire power cord or a 3-wire conduit has to be connected to the middle post of the main terminal block. The remaining two wires of the power cord or conduit have to be connected to the outside posts of the main terminal connection block. Failure to do so can result in electrical shock, severe personal injury or death. Install the power cord as follows:
For power cord installations, hook the strain relief over the power cord hole (13/8") located below the rear of the oven. Insert the power cord through the strain relief and tighten it. Do not install the power cord without a strain relief. 1 Remove the lower 3 screws from the terminal block and retain them. 2 Insert the 3 screws through each power cord terminal ring and into the lower terminals of the terminal block. Make sure that the center
(neutral) wire, which is white, is connected to the center lower position of the terminal block. 3 Tighten the 3 screws securely into the terminal block. Do not remove the ground strap connections. 3-wire connection Black White Red Terminal block Conduit connection plate If screws are not tightened securely, it can result in electrical spark and severe personal injury or death.
Only a 4-conductor power-supply cord kit rated 120/240 volts, 50 amperes and marked for use with ranges with closed-
loop connectors or opened spade lugs with upturned ends shall be used. The white middle (neutral) wire of the power cord or 4-wire conduit has to be connected to the middle post of the main terminal block. The other two wires of the power cord or conduit have to be connected to the outside posts of the main terminal connection block. The 4th ground wire
(green) must be connected to the frame of the range with the ground screw. Failure to do so can result in electrical shock, severe personal injury or death. Install the power cord as follows:
Do not install the power cord without a strain relief. 1 Remove the lower 3 screws from the terminal block and retain them. 2 Remove the ground screw and bend the end of the ground strap up so the slot is over the hole of the center screw removed in step 1. 3 Insert the ground screw into the power cord ground wire (green) terminal ring and secure it to the range frame. 4 Insert the 3 screws through each power cord terminal ring and into the lower terminals of the terminal block. Make sure that the white center
(neutral) wire is connected to the center lower position of the terminal block. 5 Tighten the 3 screws securely into the terminal block. The center screw now attaches the bent up ground strap to the block. 4-wire connection Black White Red Terminal block Ground strap Bend strap up and attach Ground screw Conduit connection plate If screws are not tightened securely, it can result in electrical spark and severe personal injury or death. 18 INSTALLATION 3-Wire Connection: Conduit 4-Wire Connection: Conduit Install the conduit as follows:
Remove the conduit connection plate from the rear of the oven and rotate it. The conduit hole (11/8") must be used. First, prepare the conduit wires as shown below. 3-Wire 4-Wire Ground wire Conduit connection plate or Second, install the conduit strain relief. For conduit installations, purchase a strain relief and insert it in the 11/8 in. (2.8 cm) conduit hole. Then install the conduit through the body of the strain relief and fasten the strain relief with its ring. Reinstall the bracket. For conduit connections:
If the wire in the conduit is copper it must be 8 or 10 AWG wiring. If the wire in the conduit is aluminum it must be 6 or 8 AWG wiring. 1 Loosen the lower 3 screws from the terminal block. 2 Insert the bare wire (white/neutral) end through the center terminal block opening. Do not remove the ground strap connections. 3 Insert the two side bare wire ends into the lower left and the lower right terminal block openings. Tighten the 3 screws securely into the terminal block. (approximately 35 - 50 IN-LB) 3-wire connection Black White Red WARNING
The white middle (neutral) wire of the power cord or 4-wire conduit has to be connected to the middle post of the main terminal block. The other two wires of the power cord or conduit have to be connected to the outside posts of the main terminal connection block. The 4th ground wire
(green) must be connected to the frame of the range with the ground screw. Failure to do so can result in electrical shock, severe personal injury or death. 1 Follow the instructions for installing the conduit under 3-Wire Connection: Conduit until the strain relief and bracket are installed. Do not install the conduit without a strain relief. 2 Loosen the 2 lower left and right screws from the terminal block. Remove the lower 2 center screws. Do not discard any screws. 3 Remove the ground screw and bend the end of the ground strap up so the slot is over the hole of the center screw removed in step 1. 4 Attach the ground (green) bare wire end to the range frame and secure it in place with the ground screw. 5 Insert the bare wire (white/neutral) end through the center terminal block opening. The center screw now attaches the bent up ground strap to the block. 6 Insert the two side bare wire ends into the left and the right terminal block openings. Tighten the 3 screws securely into the terminal block.
(approximately 35 - 50 IN-LB) 4-wire connection Black White Red Terminal block Ground strap Bend strap up and attach Wire ends Conduit connection plate Terminal block Wire ends Conduit connection plate Ground screw Ground wire If screws are not tightened securely, it can result in electrical spark and severe personal injury or death. If screws are not tightened securely, it can result in electrical spark and severe personal injury or death. Engaging the Anti-tip Device Optional Rear Filler
Move the range close enough to the opening to plug into the receptacle.
Slide the range into position ensuring that the back leg slides under the anti-tip bracket. The range should sit flush against the back wall when properly installed.
Carefully attempt to tip the range forward to ensure that the anti-tip bracket is engaged properly. If properly installed, the anti-tip bracket will prevent the range from being tipped. If the range can be tipped, reinstall the range until the anti-tip bracket is properly installed and the range will not tip forward.
Turn on electrical power. Check the range for proper operation. INSTALLATION 19 E N G L S H I If the counter does not bridge the opening at the rear wall the rear filler kit, that is provided with the slide in range, will be needed. NOTE If the countertop depth is greater than 25" there will be a gap between the filler kit and the back wall. If the countertop depth is less than 24", the control panel will not sit flush with the countertop. Installing the Rear Filler 1 Using a screwdriver, remove the three screws holding the rear bracket in place. Rear bracket 2 Attach the rear bracket and filler assembly as shown, using the three screws removed in step 1.
20 INSTALLATION Test Run Check if the range is properly installed and run a test cycle. 1 Before using the cooktop for the first time, clean it with a ceramic cooktop cleaner. This helps protect the top and makes cleanup easier. 2 Turn the oven mode knob to the Off position to start test. 3 Fill an induction-capable pot with water and place it on a surface element. Turn on the surface element. The LED bar should show the setting and the water should heat. The LED bar should not fluctuate. Repeat for all surface elements. 4 After checking all the surface heating elements, check the locking system by pressing Probe for three seconds. The oven door should lock and the cooktop should not operate while the Lockout function is turned on. Press Probe for three seconds to disable Lockout. 5 Now check the oven's operation. Turn the oven mode knob to select the Bake mode. 350 F appears in the display. Press Start. 6 The oven should finish preheating in 15 minutes, and the convection fan should operate while the oven is preheating. 7 After checking the oven's operation, turn the temperature up to 450 F and leave the oven on for at least an hour to help remove any oil which might cause smoke and odors when first using the oven. NOTE Smoke may come out of the range when it is first used. OPERATION Control Panel Overview 11 1 OPERATION 21 E N G L S H I 2 3 4 5 6 7 8 9 10 Hold 3 seconds 1 Smart DiagnosisTM 6 Oven Light
Use during the Smart Diagnosis feature. Press the button to turn oven light on or off. 2 Cook Time / Clock 7 Warming Drawer
Press the button to set the desired amount of time for food to cook. The oven shuts off when the set cooking time runs out.
Press and hold button for three seconds to set the 8 - /+
time of day. 3 Start Time / Setting
Press the button to set the delayed timed cook. The 9 Start oven starts at the set time.
Press and hold button for three seconds to select and adjust oven settings. 4 Probe / Lock Out
Press the button to select Probe function.
Press and hold button for three seconds to lock or unlock the door and control panel. 5 Timer On/Off / *Wi-Fi Press the button to set or cancel timer on oven. Press and hold button for three seconds to connect the Wi-Fi. To disconnect the appliance from the network, delete it from the registered appliances in the app. Press the button to select the warming drawer function. Press the plus button (+) to increase cooking time or oven temperature. Press the minus button (-) to decrease cooking time or oven temperature. Press the button to start all oven features. 10 Oven Mode Knob Turn the knob to select oven operating mode. 11 Flashing Clock If the colon in the clock display flashes, press Cook Time for three seconds and reset the clock, or press any key to stop the flashing. 22 OPERATION Knob Positions After cleaning the oven knobs, make sure to replace each knob in the correct position. Failure to do so can result in improper operation of the burners. 1 2 HI/Boost Simmer HI/Boost Simmer Induction Oven Mode Warm Induction The Burner On indicator light turns on when the knob is turned even if the cooktop element does not operate. 1 Burner On Indicator 2 Hot Surface Indicator The hot surface indicator light glows as long as any surface cooking area is too hot to touch.
Changing Oven Settings Clock The clock must be set to the correct time of day in order for the automatic oven timing functions to work properly. 1 Set the oven mode knob to the Off position. 2 Press and hold Cook Time for three seconds. CLO shows in the display. 3 Press plus(+) or minus(-) to select the desired time. Plus(+) to increase the time and minus(-) to decrease the time. 4 Press Start to enter the time and start the clock. Clock NOTE
The time of day cannot be changed during a timed baking or self-clean cycle.
If no other keys are pressed within 25 seconds of pressing Clock, the display reverts to the original setting.
If the display colon in the clock is blinking, you may have experienced a power failure. Reset the time. Timer Cook Time OPERATION 23 Minimum & Maximum Default Settings All of the features listed have a minimum and a maximum time or temperature setting that may be entered into the control. An entry acceptance beep sounds each time a control key is pressed. An entry error tone (two short tones) sounds if the entry of the temperature or time is below the minimum or above the maximum setting for the feature. E N G L S H I Feature Temp. /
Default min. Temp. /
Time 1:00 max. Time 12:59 12 Hr. Hr. / min. Hr. / min. 24 Hr. 0:00 23:59 Hr. / min. Hr. / min. 12 Hr. 0:10 sec. 24 Hr. 0:10 sec. 12 Hr. 0:01 min. 24 Hr. 0:01 min. 11:59 Hr. / min. 11:59 Hr. / min. 11:59 Hr. / min. 11:59 Hr. / min. Lockout The Lockout feature automatically locks the oven door and prevents most oven from being turned on. It does not disable the timer and the interior oven light. 1 Set the oven mode knob to the Off position. 2 Press and hold Probe/Lockout for three seconds. 3 The lock melody sounds, Loc appears in the display and the lock icon blinks in the display. 4 Once the oven door is locked, the lock indicator stops blinking and remains on. 5 To deactivate the Lockout feature, press and hold Probe/Lockout for three seconds. The unlock melody sounds and the door and the controls unlock. Conv. Roast Broil Bake Proof Speed Roast Warm Conv. Bake 300 F /
150 C 550 F /
285 C 350 F
(*325 F)/
12 Hr. 350 F
(*325 F)/
12 Hr. 300 F /
150 C 550 F /
285 C Lo Hi 400 F 520 F Hi /
3 Hr. 170 F /
80 C 550 F /
285 C 350 F /
12 Hr. 0:01 min. 11:59 Hr. / min. 12 Hr. 12 Hr. 3 Hr. 4 Hr. 10 min. Self Clean 3 Hr. 5 Hr. Probe EasyClean 80 F /
27 C 210 F /
100 C 150 F /
65 C
* Using Auto Conversion
Default cook mode times are without setting cook time. 24 OPERATION Timer On/Off The Timer feature serves as an extra timer in the kitchen that beeps when the set time has run out. It does not start or stop cooking. The Timer feature can be used during any of the oven control functions. Setting the Timer 1 Set the oven mode knob to the Off position. 2 Press Timer On/Off. 0:00 with HR inside it appears and Timer flashes in the display. 3 Press plus(+) or minus(-) to set the desired time. Plus(+) increases the time and minus(-) decreases the time. 4 Press Timer On/Off or Start to start the Timer. The remaining time countdown appears in the display. If Timer On/Off is pressed again after the timer has started, the timer function is canceled. 5 When the set time runs out, End shows in the display. The indicator tones sound every 15 seconds until Timer On/Off is pressed. NOTE NOTE
If the remaining time is not in the display, recall the remaining time by pressing Timer On/Off.
Press Timer On/Off twice to set the time in minutes and seconds.
Press Timer On/Off once to set the time in hours and minutes. Canceling the Timer 1 Press Timer On/Off once. The display returns to the time of day. Wi-Fi The Wi-Fi button is used to connect the appliance to a home Wi-Fi network. 1 Set the oven mode knob to the Off position. 2 Press and hold Timer On/Off for 3 seconds. 3 The power on chime sounds, SEt appears in the display, and the Wi-Fi icon (
) blinks. 4 Register the appliance on the Wi-Fi network using the smart phone app. 5 To disconnect the appliance from the network, delete it from the registered appliances in the app. NOTE See the Smart Functions section in the owners manual for more details. Settings Set the oven mode knob to the Off position. Press and hold Start Time for three seconds. Then press the Start Time key repeatedly to toggle through and change oven settings. The Setting key allows you to:
set the hour mode on the clock (12 or 24 hours)
enable/disable convection auto conversion
adjust the oven temperature
activate/deactivate the preheating alarm light
set the beeper volume
switch the temperature scale between Fahrenheit and Celsius
activate/deactivate the cooktop beeper Setting the Hour Mode The control is set to use a 12-hour clock. To reset the clock to 24-hour mode, follow the steps below. 1 Set the oven mode knob to the Off position. 2 Press and hold Start Time for 3 seconds. 3 Press plus(+) or minus(-) to set the desired hour mode on the clock. 4 Press Start to accept the desired change. Setting Convection Auto Conversion When Conv. Bake and Conv. Roast are selected, Convection Auto Conversion automatically converts the standard recipe temperature entered to a convection temperature by subtracting 25 F / 14 C. This auto-converted temperature shows on the display. For example, select Conv. Bake, enter 350 F, and 325 F shows on the display after preheat. Convection Auto Conversion is enabled by default. To change the setting, follow these instructions. 1 Set the oven mode knob to the Off position. 2 Press and hold Start Time for 3 seconds. Then press Start Time repeatedly until appears in the display. 3 Press plus(+) or minus(-) to turn the feature on/
off. 4 Press Start to accept the change. Adjusting the Oven Temperature Adjusting the Oven Beeper Volume OPERATION 25 E N G L S H I 1 Set the oven mode knob to the Off position. 2 Press and hold Start Time for three seconds. Then press Start Time repeatedly until appears in the display. 3 Press plus(+) or minus(-) to select the desired volume. 4 Press Start to accept the change. Selecting Fahrenheit or Celsius Set the oven temperature display to show either Fahrenheit (F) or Celsius (C) units. The oven defaults to Fahrenheit unless changed by the user. 1 Set the oven mode knob to the Off position. 2 Press and hold Start Time for three seconds. Then press Start Time repeatedly until appears in the display. 3 Press plus(+) or minus(-) to select F(Fahrenheit) or C(Centigrade). 4 Press Start to accept the change. Turning the Cooktop Beeper On/Off 1 Set the oven mode knob to the Off position 2 Press and hold Start Time for three seconds. Then press Start Time repeatedly until appears in the display. 3 Press plus(+) or minus(-) to turn the beep on/off. 4 Press Start to accept the change. Your new oven may cook differently from the one it replaced. Use your new oven for a few weeks to become more familiar with it before changing the temperature settings. If after familiarizing yourself with the new oven, you still think that it is too hot or too cold, you can adjust the oven temperature yourself. NOTE To begin, either raise or lower the thermostat 15 F (8 C). Try the oven with the new setting. If the oven still needs adjustment, raise or lower the thermostat again, using the first adjustment as a gauge. For example, if the adjustment was too much, raise or lower the thermostat 10 F (5 C). If the adjustment was not enough, raise or lower the thermostat 20 F (12 C). Proceed in this way until the oven is adjusted to your satisfaction. 1 Set the oven mode knob to the Off position. 2 Press and hold Start Time for three seconds. Then press Start Time repeatedly until appears in the display. 3 To increase the temperature, press plus (+) until the desired amount appears in the display. To decrease the temperature, press minus (-) until the desired amount appears in the display. 4 Press Start to accept the change. NOTE
This adjustment does not affect the broiling or Self Clean temperatures. The adjustment is retained in memory after a power failure. The oven temperature can be increased (+) or decreased (-) as much as 35 F or 19 C.
Once the temperature is increased or decreased, the display shows the adjusted temperature until it readjusts. Turning the Preheat Alarm Light On/Off When the oven reaches its set-temperature, the preheating alarm light flashes 5 times or until the oven door is opened. 1 Set the oven mode knob to the Off position. 2 Press and hold Start Time for three seconds. Then press Start Time repeatedly until appears in the display. 3 Press plus(+) or minus(-) to turn the light on/off. 4 Press Start to accept the change. 26 OPERATION Start Time (Delayed Timed Cook) Cook Time (Timed Cook) The automatic timer of the Delayed Timed Cook function turns the oven on and off at the time you select. This feature can be used with the Bake, Conv. Bake and Conv. Roast modes. Set the oven to cook for a specific length of time using the Timed Cook feature. This feature can only be used with the Bake, Conv. Bake and Conv. Roast modes. Setting a Delayed Timed Cook For example, to bake at 300 F and delay the start of baking until 4 h 30 m, first set the clock for the correct time of day. 1 Turn the oven mode knob to select the Bake mode. 350 F appears in the display. 2 Set the temperature: press minus(-) until 300 F appears in the display. 3 Press Cook Time and press plus (+) or minus (-) to set the baking time. 4 Press Start Time. 5 Set the start time: press plus(+) until HR4:30 appears in the display. 6 Press Start. A short beep sounds and Timed Delay and the start time appear in the display. The oven begins baking at the set start time. NOTE
To cancel the Delayed Timed Cook function, turn the oven mode knob to the Off position.
To change the cooking time, repeat step 3 and press Start.
If the oven clock is set as a 12-hour clock, you can delay the cook time for 12 hours. If the oven clock is set as a 24-hour clock, you can delay the cook time for 24 hours. The oven will continue to cook for the set amount of time and then turn off automatically. When the cooking time has elapsed:
End and the time of day show in the display.
The cook end indicator tone sounds every 60 seconds until the oven mode knob is turned to the Off position. CAUTION
Use the automatic timer when cooking cured or frozen meats and most fruits and vegetables. Foods that can easily spoil, such as milk, eggs, fish, meat or poultry, should be chilled in the refrigerator. Even when chilled, they should not stand in the oven for more than 1 hour before cooking begins, and should be removed promptly when cooking is completed.
Eating spoiled food can result in sickness from food poisoning. Setting the Cook Time Function For example, to bake at 300 F for 30 minutes, first set the clock to the correct time of day. 1 Turn the oven mode knob to select the Bake mode. 350 F appears in the display. 2 Set the oven temperature. For this example, press minus(-) until 300 F appears in the display. 3 Press Cook Time. Timed flashes in the display. Bake, 0:00 and 300 F appear in the display. 4 Set the baking time: press plus(+) until 30:00 appears in the display. The baking time can be set for any amount of time between 1 minute and 11 hours and 59 minutes. 5 Press Start. The oven will continue to cook for the set amount of time and then turn off automatically. When the cooking time has elapsed:
End and the time of day show in the display.
The cook end indicator tone sounds every 60 seconds until the oven mode knob is turned to the Off position. Changing the Cook Time during Cooking For example, to change the cook time from 30 minutes to 1 hour and 30 minutes, do the following. 1 Press Cook Time. 2 Change the baking time: press plus(+) until 1 hour and 30 minutes appears in the display. 3 Press Start to accept the change. Oven Light The interior oven light automatically turns on when the door is opened. Press Oven Light to manually turn on/off the oven light. NOTE The oven light cannot be turned on if the Self Clean function is active. Using the Cooktop Cooking Areas The cooktop is equipped with four induction cooking elements of different sizes and a radiant heat warming zone. The wattage ratings below are maximum outputs. The second rating is the maximum output for Boost mode. 3 4 1 5 2 1 Induction left front cooking element:
8", 2100 W / 3200 W (240 V) 2 Induction right front cooking element:
11", 2400 W / 4000 W (240 V) 3 Induction left rear cooking element:
6", 1300 W / 1800 W (240 V) 4 Induction center rear cooking element:
6", 1300 W / 1800 W (240 V) 5 Warming zone
Speed and Efficiency Induction cooking elements heat faster and use less energy. Induction power levels quickly boil liquids and are efficient when simmering. A Cooler Cooktop Whether induction cooking elements are turned on or off, they remain cooler than radiant elements. Virtually no heat is wasted because the heat begins with the presence of cookware. Easy Cleanups Cooler cooking elements make for easier cleaning. Spills resist sticking or burning so they wipe up easily. Pan Size Detection A sensor automatically detects and adapts the induction cooking element to the pan size in use for more consistent, even cooking. Greater Responsiveness Induction cooking elements are more responsive than their electric or gas counterparts because only the pan heats. Induction elements heat more easily and are just as responsive when reducing temperatures to a simmer. OPERATION 27 E N G L S H I Induction Cookware NOTE Before using the induction cooking elements, carefully read and follow these cookware recommendations and the instructions in the pan sensing sections. When purchasing pans for use on the induction cooktop, look for cookware identified by the manufacturer as "induction ready" or "induction capable", or that is marked by the manufacturer as specifically designed for induction cooking. The base material of the cookware must be magnetic for the cooking elements to activate. Use a magnet to check if the cookware base material is suitable. If the magnet sticks to the bottom of the cookware, the cookware can be used for induction cooking. For the best possible surface cooking results, use only high-quality, heavy gauge steel cookware on the induction cooking elements. Follow manufacturer's recommendations when using induction cookware. The three most common induction cookware types available are stainless steel, cast iron, and porcelain-
enamel-coated metals.
Stainless Steel is generally excellent for induction cooking. It is durable, easy to clean, and resists staining. NOTE Not all stainless steel cookware is magnetic;
stainless steel is not always suitable for induction cooking.
Cast iron cooks evenly and is also good for induction cooking. Do not slide cast iron cookware on the cooktop; cast iron cookware with a rough surface will scratch the ceramic cooktop.
Porcelain-enamel-coated metals have variable heating characteristics depending on the quality of the base metal. Make sure the porcelain-enamel coating is smooth to avoid scratching the ceramic cooktop. There are LED displays under each induction cooking element which adjust to show the power level when the element is used. Induction Cookware Types Cookware Placement Moving Cookware on the Cooktop 28 OPERATION Use the proper cookware and place it correctly on the cooktop. One or more of the cooking elements will not heat if any of the incorrect conditions shown is detected by the sensors located below the ceramic cooktop surface. Correct the problem before attempting to use the cooktop. Always use heavier gauge, high-quality cookware on the cooking elements and do not slide it on the ceramic cooktop surface. Even high-quality cookware can scratch the cooktop surface. NOTE
Always lift cookware before moving it on the ceramic glass surface. Any cookware that has a rough or dirty bottom can mark and scratch the cooktop surface. Always start with clean cookware.
Do not allow aluminum foil or any material that can melt to make contact with the ceramic glass cooktop. If these materials melt on the cooktop they may damage the ceramic glass surface. Sliding any type of cookware over the surface will scratch the cooktop over time. Scratches will make cleaning the ceramic cooktop difficult and degrade the appearance of the cooktop. Correct
Cookware is centered correctly on surface of cooking element.
Pan has flat bottom and straight sides.
Pan size meets or exceeds the recommended minimum size for the cooking element.
Pan rests completely on the cooktop surface.
Pan is properly balanced. Incorrect
Cookware is not centered on surface of cooking element.
Pan has curved or warped bottom or sides.
Pan does not meet the minimum size required for the cooking element used.
Pan bottom rests on cooktop trim or does not rest completely on the cooktop surface.
Pan is unbalanced by heavy handle. Pan Sensing The cooking-element sensors located below the cooktop surface require certain cookware conditions to be met before the induction cooking elements can operate. The cooking zone LED bar may display a pan sensing error message. If a cooking element is activated and no cookware is detected, the affected induction cooking zone LED bar will fluctuate. If the cookware does not meet the correct conditions, the cooking zone may not heat. If the problem is not corrected, the affected cooking element will automatically deactivate after one minute. Minimum and Maximum Pan Size Home Canning There are four cooking elements on the induction cooktop. Each element requires a minimum pan size to be used effectively. The inner ring of each cooking element is a guide to the minimum pan size. The bottom of the pan must fully cover the inner ring for proper cooking to occur. 6 inch (152 mm) Minimum Pan Size:
6 inch (152 mm) OPERATION 29 E N G L S H I CAUTION Canning can generate large amounts of steam. Use extreme caution to prevent burns. Raise the lid so that steam is vented away from you. Safe canning requires that harmful micro-organisms are destroyed and jars are sealed completely. When using a water bath canner, maintain a gentle but steady boil for the required time. Read and observe the following precautions when home canning. Read the information on the USDA
(United States Department of Agriculture) website and follow the recommendations there for home canning procedures.
Use only quality, flat-bottomed canners when home canning. Use a ruler to check the bottom of the canner for flatness.
Canners with ridges that radiate from the bottom center are not suitable for use on a ceramic glass cooktop.
The diameter of the canner should not exceed the maximum cooking element markings by more than one inch. Use smaller diameter canners on ranges with ceramic-glass or open-coil-electric cooktops.
Start with hot tap water to boil water more quickly. Bring water to an initial boil using the highest heat setting. Once the water is boiling, reduce the heat as much as possible while maintaining the boil.
It is best to can small amounts and keep the canner light enough to lift.
Do not leave the water bath or pressure canners on high heat for extended periods.
Alternate surface elements between each batch to allow the elements and surrounding surfaces to cool down. Do not can using the same element all day. Minimum Pan Size:
7.5 inch (190 mm) Minimum Pan Size:
9.5 inch (245 mm) 7.5 inch (190 mm) 9.5 inch (245 mm) Use the cross that marks each cooking element to help determine the maximum pan size. After centering the cookware on the cooking element, the cookware
of the cross on the cooking element. The pan must make full contact with the glass surface without the bottom of the pan touching the metal cooktop trim. If the correct induction cookwarecentered on any of the active cooking elementsis too small, the affected cooking elements LED bar fluctuates and the pan does not heat. Hot Cookware and Residual Heat CAUTION Unlike radiant surface elements, induction cooking elements do not glow red when hot. You can be burned if the glass surface is hot from the residual heat transferred from the cookware. Do not touch hot cookware or pans. Use oven mitts or potholders to protect hands from burns. 30 OPERATION Setting Surface Controls
Cooking Element LED Bar The range provides an LED bar for each cooking element on the cooktop. Check messages in the display window and use the LEDs with the corresponding control knobs to monitor the power levels of the elements. Lo Simmer MED 3 4 6 7 8 HI Boost
Available Power Level Settings The cooktop controls LED bar displays the elements power level settings, ranging from Lo to Hi to Boost. Adjust the settings in increments of one, from Lo (Level 1) to Boost (Level 10). To select Hi, turn the knob clockwise, through level 8 to Hi/Boost.
Boost Power Level To activate the Boost mode, turn the knob directly from Off to Boost. Boost mode is only available immediately after activating a cooking element. When the cooking element is set to the Boost mode, the LED bar flashes and the Boost mode stays in operation for up to 10 minutes. After 10 minutes, the cooking element automatically returns to the Hi setting. HI/Boost Simmer The maximum operating time for all element levels except the Boost mode is 12 hours. Hot Surface Indicator The hot surface indicator light glows as long as any surface cooking area is too hot to touch. It remains on after the element is turned off and until the surface has cooled to approximately 130 F. It is normal for the surface elements to cycle on and off when cooking at lower temperature settings. Using the Cooking Elements CAUTION Before Cooking
Do not place or store flammable or heat-
sensitive items on the induction cooktop, even when the cooktop is not in use.
Place cookware on the cooking elements before turning on the induction cooktop.
Do not place sealed containers on the cooktop. During Cooking
Do not place metallic objects such as knives, forks, spoons, and lids on the induction cooktop surface; they can get hot.
Use this appliance only for normal household use. It is not designed for commercial or industrial use.
Never use the appliance to heat the room.
Use caution when plugging electrical appliances into power outlets near the cooktop. Keep power cords from any contact with the cooktop or cookware.
Overheated fat and oil can catch fire quickly. Never leave surface elements unattended when frying foods.
Do not use the induction cooktop to heat aluminum foil, products wrapped in aluminum foil , or frozen foods packaged in aluminum cookware.
Use caution when plugging electrical appliances into outlets near the cooktop to keep power cords away from the hot cooktop or cookware.
Users with pacemakers and active heart implants must keep their upper body at a minimum distance of 1 ft (30 cm) from active induction cooking elements. If in doubt, consult the implant manufacturer or your doctor. After Cooking
After use, switch off the induction cooking element using its control. Do not rely on the pan sensor. OPERATION 31 Pan Preheat Recommendations Induction cooking may decrease the amount of time required to preheat cookware compared to cooking on a radiant element cooktop or gas surface burner. Pay close attention to all food items while cooking on the cooktop or in the oven, and until all cooking processes are complete. E N G L S H I CAUTION Remember that induction surface cooking initially heats the cookware VERY QUICKLY if the cookware does not contain food. Noises during Cooktop Operation The electronic processes involved with induction cooking may create some background noises. You may hear a slight buzzing sound when cooking on the cooktop. These noises are part of the induction cooking process and are considered normal. Some cookware will buzz, depending on the construction or base material. The buzz may be more noticeable if the contents of the pan are cold. As the pan heats up, the noise will decrease. The noise will also decrease if the power level setting is reduced. NOTE
When using the induction cooktop, operational noises are more noticeable while cooking in Boost mode. But very loud noises are not normal when induction cooking.
The cooktop fan may turn on to reduce the temperature of the product, even when the surface elements are not being used. Turning On Cooking Elements
(Except Warming Zone) 1 Push the control knob in. 2 Turn the knob in either direction to select the desired setting. A short beep sounds and the cooking elements LED bar shows its current setting. 3 To activate the Boost mode, turn the knob directly from Off to Boost. 3 HI/Boost Simmer The Recommended Surface Cooking Setting Start most surface cooking on a higher setting and then adjust to a lower setting to finish cooking. The suggested settings may need adjustments, depending on cookware design and quality and on the amount of food being prepared. Use quality cookware that is constructed with a magnetic base material and that meets the minimum and maximum pan size requirements. Setting Recommended Use Boost 8-Hi
Use to heat a large amount of food or to bring large pans of water to a boil
Bring liquid to a boil
Start most cooking
Hold a rapid boil, fry, deep fat fry MED-8
Quickly brown or sear food
Steaks, cutlets, grilled meat 3-MED
Cook soups, sauces and gravies
Maintain a slow boil
Fry or saut foods
Eggs, pancakes
Stew or steam food
Simmer
Keep food warm SIMMER-3 Lo-SIMMER
Melt chocolate or butter
Simmer 32 OPERATION Power Management The cooking zones, which consist of paired cooking elements, are restricted to drawing a certain maximum amount of power. If you turn on the Boost function for one element while its paired element is in use, the Power Management function may automatically reduce the power of both elements. For consistent performance when using multiple elements, use elements in separate cooking zones. Turning On Warming Zone 1 Push the control knob in. 2 Turn the knob in either direction to select the desired setting. For best results :
When warming pastries or breads, leave an opening in the cover to allow moisture to escape.
Do not use plastic wrap to cover food. Plastic may melt onto the surface and be very difficult to remove.
Use only dishware, utensils and cookware that is recommended for oven and cooktop use. NOTE
For best results, food on the Warming Zone should be kept in its container or covered with a lid or aluminum foil to maintain food quality.
Do not allow aluminum foil to contact the hot induction cooktop surface. If a particular food is not listed , start with the medium heat level and adjust as needed. Most foods can be kept at serving temperatures by using the medium heat level. Setting Food Item
Vegetables Low
(Lo-3)
Rice
Pasta
Sugary sauces (tomato sauce, BBQ sauce)
Cream-based soups and sauces Medium
Stews and chili
(3-7) High
(7-Hi)
Warming empty plates or serving dishes
Broth-based soups
Hot beverages (hot cider, hot chocolate) NOTE
If the combined heat of the oven and the surface burners is sufficiently high, the output of the surface burners is reduced to avoid damage to the product.
Both elements in a set of paired elements cannot use the Boost mode at the same time. To use the Boost mode on two elements simultaneously, use non-paired elements. Warming Zone Use the Warming Zone, located in the back right of the glass surface, to keep hot, cooked food at serving temperature. The Warming Zone keeps food warm after it has already been cooked. Attempting to cook uncooked or cold food on the Warming Zone could result in a food-borne illness. CAUTION FOOD POISON HAZARD: Bacteria may grow in food at temperatures below 140 F.
Always start with hot food. Do not use the warm setting to heat cold food.
Do not use the warm setting for more than two hours. Using the Oven Before Using the Oven NOTE
Because the oven temperature cycles, an oven thermometer placed in the oven cavity may not show the same temperature that is set on the oven.
It is normal for the convection fan to run while preheating during a regular bake cycle.
The convection fan motor may run periodically during a regular bake cycle.
The heat turns off if the door is left open during baking. If the door is left open for longer than 30 seconds during baking, the heat turns off. The heat turns back on automatically once the door is closed. Oven Vent Areas near the vent may become hot during operation and may cause burns. Do not block the vent opening. Avoid placing plastics near the vent as heat may distort or melt the plastic. It is normal for steam to be visible when cooking foods with high moisture content. Bake OPERATION 33 Using Oven Racks The racks have a turned-up back edge that prevents them from being pulled out of the oven cavity. E N G L S H I Removing Racks 1 Pull the rack straight out until it stops. 2 Lift up the front of the rack and pull it out. Replacing Racks 1 Place the end of the rack on the support. 2 Tilt the front end up and push the rack in. CAUTION
Replace oven racks before turning the oven on to prevent burns.
Do not cover the racks with aluminum foil, or any other material, or place anything on the bottom of the oven. Doing so will result in poor baking and may damage the oven bottom.
Only arrange oven racks when the oven is cool. Bake is used to prepare foods such as pastries, breads and casseroles. The oven can be programmed to bake at any temperature from 170 F (80 C) to 550 F (285 C). The default temperature is 350 F
(175 C). Vent trim Oven Vent CAUTION
The edges of the range vent and vent trim are sharp and may become hot during operation. Wear gloves when cleaning the range to avoid burns or other injury. Setting the Bake Function (example, 375 F) 1 Turn the oven mode knob to select Bake. 2 Set the oven temperature: for example, press plus(+) until 375 F appears in the display. 3 Press Start. The oven starts to preheat. As the oven preheats, the temperature is displayed and rises in 5 degree increments. Once the oven reaches the set temperature, a tone sounds and the oven light blinks on and off. 4 When cooking is complete, turn the oven mode knob to the Off position. 5 Remove food from the oven. NOTE It is normal for the convection fan to operate periodically throughout a normal bake cycle in the oven. This is to ensure even baking results. 34 OPERATION Baking Tips
Baking time and temperature will vary depending
Use Convection Bake for faster and more even on the characteristics, size, and shape of the baking pan used. multiple-rack cooking of pastries, cookies, muffins, biscuits, and breads of all kinds. Tips for Convection Baking
Check for food doneness at the minimum recipe time.
Use metal bakeware (with or without a nonstick finish), heatproof glass-ceramic, ceramic or other bakeware recommended for oven use.
Dark metal pans or nonstick coatings will cook food faster with more browning. Insulated bakeware will slightly lengthen the cooking time for most foods. NOTE The oven bottom has a porcelain-enamel finish. To make cleaning easier, protect the oven bottom from excessive spillovers by placing a cookie sheet on the rack below the rack you are cooking on. This is particularly important when baking a fruit pie or other foods with a high acid content. Hot fruit fillings or other foods that are highly acidic may cause pitting and damage to the porcelain-enamel surface and should be wiped up immediately. Convection Mode The convection system uses a fan to circulate the heat evenly within the oven. Improved heat distribution allows for even cooking and excellent results while cooking with single or multiple racks. Setting the Convection Function (example, 375 F) 1 Turn the oven mode knob to select the Conv. Bake or Conv. Roast. 2 Set the oven temperature: for example, press plus(+) until 375 F appears in the display. 3 Press Start. The display shows Conv. Bake or Conv. Roast and the oven temperature starting at 100 F. As the oven preheats, the display shows increasing temperatures in 5-degree increments. Once the oven reaches the set adjusted temperature, a tone sounds and the oven light flashes on and off. The display shows the auto converted oven temperature, 350 F and the fan icon. 4 When cooking has finished or to cancel, turn the oven mode knob to the Off position. NOTE The oven fan runs while convection baking. The fan stops when the door is open. In some cases, the fan may shut off during a convection bake cycle.
Bake cookies and biscuits on pans with no sides or very low sides to allow heated air to circulate around the food. Food baked on pans with a dark finish will cook faster.
If cooking on single rack, place the rack in the position suggested in the charts on the following pages. If cooking on multiple racks, place the oven racks in positions 3 and 5 (for two racks).
Multiple oven rack cooking may slightly increase cook times for some foods.
Cakes, cookies and muffins have better results when using multiple racks. The Convection Roast feature is designed to give optimum roasting performance. Convection Roast combines cooking with the convection fan to roast meats and poultry. The heated air circulates around the food from all sides, sealing in juices and flavors. Foods are crispy brown on the outside while staying moist on the inside. Convection roasting is especially good for large tender cuts of meat, uncovered. Tips for Convection Roasting Use a broiler pan and grid when preparing meats for roasting. The broiler pan catches grease spills and the grid helps prevent grease splatters. 1 Place the oven rack in the position suggested in the charts on the following pages. 2 Place the grid in the broiler pan. 3 Place the broiler pan on the oven rack. Grid (sold separately) Broiler pan (sold separately) CAUTION
Do not use a broiler pan without a grid.
Do not cover the grid with aluminum foil.
Position food (fat side up) on the grid. OPERATION 35 Rack position E N G L S H I Recommended Baking and Roasting Guide Baking results will be better if baking pans are centered in the oven as much as possible. If cooking on multiple racks, place the oven racks in the positions shown. Rack and Pan Placement B Single rack baking Rack Multiple rack baking Multiple rack roasting Baking rack guide Cakes
Bundt cakes Cookies
Chocolate chips Food
Layer cakes
Angel food cake
Sugar cookies
Brownies
Fresh
Frozen
From scratch
Refrigerator
Biscuit, canned Pizza Pastry Crust Breads
Biscuit, from scratch Desserts
Muffins
Fruit crisps and cobblers, from scratch
Pies, from scratch, 2-crust fruit Custards
Cheesecake, crme brule Souffls
Sweet or savory Casserole Frozen lasagna Rack (Position 5) Rack (Position 4) Roasting rack guide Rack (Position 2) Bottom Rack (Position B)
Multiple roasting helps to make more than 2 Beef roasted foods at same time.
If roasting on multiple racks, place more than 2 broiler pans and 2 grids on the racks. NOTE For best results, use the Bake mode for cakes and the Convection Bake mode for cookies. Rack position Food Rib Boneless rib, top sirloin Beef tenderloin Rib Rare Medium Well done Rare Medium Well done Rare Medium Pork Bone-in, sirloin Ham, cooked Whole chicken Poultry Chicken pieces Turkey 2 or B 5 3 3 4 4 4 5 5 4 4 5 5 5 4 4 2 2 5 2 2 2 2 2 2 2 2 2 2 2 2 2 36 OPERATION Broil The Broil function uses intense heat from the upper heating element to cook food. Broiling works best for tender cuts of meat, fish, and thinly cut vegetables. Some models may feature a hybrid broiler consisting of an inner broiler that utilizes a carbon heating element which provides instantaneous heat, and a traditional outer broiling element. During normal broiler operation, it is normal for either element to cycle off intermittently. CAUTION
Do not use a broiler pan without a grid. Oil can cause a grease fire.
Do not cover the grid and broiler pan with aluminum foil. Doing so will cause a fire. Smoking Due to the intense heat associated with broiling, it is normal to experience smoke during the cooking process. This smoke is a natural byproduct of searing and should not cause you to worry. If you are experiencing more smoke than you are comfortable with, use the following tips to reduce the amount of smoke in your oven. 1 Always use a broiler pan. Do not use saute pans or regular baking sheets for safety reasons. 2 The broiler pan should always be thoroughly cleaned and at room temperature at the beginning of cooking. 3 Always run your cooktop ventilation system or vent hood during broiling.
Always use a broiler pan and grid for excess fat and grease drainage. This will help to reduce splatter, smoke, and flare-ups. 4 Keep the interior of your oven as clean as possible. Leftover debris from prior meals can burn or catch fire. NOTE
This range is designed for closed-door broiling. Close the door to set the Broil function. If the door is open, the Broil function cannot be set and door appears on the display. Close the door and reset the Broil function. Opening the door turns off the broil burner during broiling. If the door is opened during broiling, the broil burner turns off after five seconds. The broiler turns back on automatically once the door is closed. Setting the oven to Broil 1 Turn the oven mode knob to select Broil Hi, Lo. 2 Press plus(+) or minus(-) to select Hi or Lo. 3 Press Start. The oven begins to heat. 4 Let the oven preheat for approximately five minutes before cooking the food if using broil. 5 Turn the oven mode knob to the Off position to cancel at any time or when cooking is complete. 5 Avoid fatty marinades and sugary glazes. Both of these will increase the amount of smoke you experience. If you would like to use a glaze, apply it at the very end of cooking. 6 If you are experiencing significant smoke with any food item, consider:
Lowering the broiler to the Lo setting.
Lowering the rack position to cook the food further away from the broiler.
Using the Hi broil setting to achieve the level of searing you desire, and then either switching to the Lo broil setting, or switching to the Bake function. 7 As a rule, fattier cuts of meat and fish will produce more smoke than leaner items. 8 Adhere to the recommended broil settings and cooking guidelines in the chart on the following page whenever possible. Recommended Broiling Guide The size, weight, thickness, starting temperature, and your preference of doneness will affect broiling times. This guide is based on meats at refrigerator temperature. For best results when broiling, use a pan designed for broiling. OPERATION 37 E N G L S H I Food Quantity and/or Thickness Rack Position First Side
(minutes) Second Side
(minutes) Comments Ground Beef Well done 1 lb. (4 patties) 1/2 to 3/4" thick 3-6 2-4 Space evenly. For 1-4 patties, use Speed Broil. For more than 4 patties, use Broil. Steaks less than 1" thick cook through before browning. Pan frying is recommended. Slash fat. Lobster Tails 24 10 to 12 oz. each Do not turn over Cut through back of shell. Spread open. Brush with melted butter before broiling and after half of broiling time. Broil skin-side-down first. Handle and turn very carefully. Brush with lemon butter before and during cooking, if desired. Increase time 5 to 10 minutes per side for 11/2" thick or home-cured ham. Beef Steaks Rare Medium Well done Rare Medium Well done Toast Chicken 1" thick 1 to 11/2 lbs. 11/2" thick 2 to 21/2 lbs. 1 whole cut up 2 to 21/2 lbs., split lengthwise 2 Breasts Fish Fillets 1/4 to 1/2" thick Ham Slices
(precooked) Pork Chops Well done Lamb Chops Medium Well done Medium Well done Salmon Steaks 1/2" thick 1 (1/2" thick) 2 (1" thick) about 1 lb. 2 (1" thick) about 10 to 12 oz. 2 (11/2" thick) about 1 lb. 2 (1" thick) 4 (1" thick) about 1 lb. 7 7 7 7 5 5 5 7 5 5 5 6 5 6 5 6 6 6 6 5 5 3-5 4-6 5-7 7-9 9-11 11-13 0.5-1 8-10 8-10 9-12 2-4 2-4 3-6 5-8 3-5 5-7 7-9 9-11 8-10 9-11 2-4 2-4 3-5 4-6 6-8 8-10 0.5 4-6 5-7 2-4 2-4 4-7 5-8 2-5 4-7 7-9 7-9 3-5 4-6 Grease pan. Brush steaks with melted butter.
This guide is only for reference. Adjust cook time according to your preference.
For best performance, center food on rack when using Speed Broil/Broil. 38 OPERATION Tips for Broiling Beef
Steaks and chops should always be allowed to rest for five minutes before being cut into and eaten. This allows the heat to distribute evenly through the food and creates a more tender and juicy result.
Pieces of meat that are thicker than two inches should be removed from the refrigerator 30 minutes prior to cooking. This will help them cook more quickly and evenly, and will produce less smoke when broiling. Cooking times will likely be shorter than the times indicated in the Broiling Chart.
For bone-in steaks or chops that have been frenched (all meat removed from around the bone), wrap the exposed sections of bone in foil to reduce burning. Seafood
When broiling skin-on fish, always use the Lo broil setting and always broil the skin side last.
Seafood is best consumed immediately after cooking. Allowing seafood to rest after cooking can cause the food to dry out.
It is a good idea to rub a thin coating of oil on the surface of the broiling pan before cooking to reduce sticking, especially with fish and seafood. You can also use a light coating of non-stick pan spray. Vegetables
Toss your vegetables lightly in oil before cooking to improve browning. Warm This function will maintain an oven temperature of 170 F. The Warm function will keep cooked food warm for serving up to three hours after cooking has finished. The Warm function may be used without any other cooking operations. Setting the Warm Function 1 Turn the oven mode knob to select Warm. 2 Press Start. 3 Turn the oven mode knob to the Off position when warming is finished. NOTE
The Warm function is intended to keep food warm. Do not use it to cool food down.
It is normal for the fan to operate during the Warm function. Proof This feature maintains a warm oven for rising yeast leavened products before baking. Setting the Proof Function 1 Use rack position 2 or 3 for proofing. 2 Turn the oven mode knob to select Proof. 3 Press Start. 4 Turn the oven mode knob to the Off position when proofing is finished. NOTE
To avoid lowering the oven temperature and lengthening proofing time, do not open the oven door unnecessarily. Check bread products early to avoid over proofing.
Do not use the proofing mode for warming food or keeping food hot. The proofing oven temperature is not hot enough to keep foods at safe temperatures. Use the Warm feature to keep food warm. Proofing does not operate when the oven is above 125 F. Hot shows in the display.
It is normal for the fan to operate during the Proof function. Speed Roast The Speed Roast feature is designed to quickly roast poultry. The combination of intense heat from the upper heating element and heated air from the back heating element result in crispier food and help to save cooking time. Speed roasting is especially good for medium sized poultry. NOTE
The recommended cook time is 60-65 minutes for a whole chicken weighing 3.3 lb.
Adjust the cook time according to the weight of the poultry.
Place the oven rack in position 2.
Speed Roast is designed to reduce the cooking time. There is no need for preheating.
This function is optimized for poultry, so the temperature of Speed Roast cannot be changed.
It is normal for the fan to operate during the Speed Roast function. Setting the Speed Roast Function 1 Put food in the oven. 2 Turn the oven mode knob to select Speed Roast. The display shows Roast Speed. 3 Press Start. Meat Probe The meat probe accurately measures the internal temperature of meat, poultry and casseroles. It should not be used during broiling, self clean, warming or proofing. Always unplug and remove the meat probe from the oven when removing food. Before using, insert the probe into the center of the thickest part of the meat or into the inner thigh or breast of poultry, away from fat or bones. Place food in the oven and connect the meat probe to the jack. Keep the probe as far away from heat sources as possible. Setting the Meat Probe Function (example for Roast 375 F with Probe temp. 160 F) 1 Insert the meat probe into the meat. 2 Connect the meat probe to the jack. OPERATION 39 Changing the Probe temperature while cooking 1 Press Probe. 2 Set the probe temperature. E N G L S H I 3 Press Start. IMPORTANT NOTE Turn the oven mode knob to the Off position to cancel the Meat Probe function at any time. To avoid breaking the probe, make sure food is completely defrosted before inserting. CAUTION
Always use an oven mitt to remove the temperature probe. Do not touch the broil element. Failure to obey this caution can result in severe personal injury.
To avoid damage to the meat probe, do not use tongs to pull on the probe when removing it.
Do not store the meat probe in the oven.
Do not pull wire to remove probe. Hold the probe head, not the wire, when inserting or removing probe. 3 The meat probe icon flashes in the display if the meat probe is properly connected. Setting the Probe Temperature 1 Select cook mode. Turn the oven mode knob to select Conv. Roast. 2 Set the oven temperature: press plus(+) or minus(-) until 375 F appears in the display. 4 Set the probe temperature: press plus(+) or minus(-) until 160 F appears in the display. 3 Press Probe. 5 Press Start. The default probe temperature is 150 F (65 C), but can be changed to any temperature between 80 F (27 C) and 210 F (100 C). The display shows the changing probe temperature. When the set probe temperature is reached, the oven shuts off automatically. Recommended Probe Temperature Chart Doneness Probe Temp. Beef, Lamb and Veal Rare Medium Rare Medium Well Done Pork Well Done Poultry Breast, Well Done Thigh, Well Done Stuffing, Well Done 130 F (54 C) 140 F (60 C) 150 F (66 C) 160 F (71 C) 170 F (77 C) 170 F (77 C) 180 F (82 C) 165 F (74 C) 40 OPERATION Remote Start Sabbath Mode If the appliance is registered on a home Wi-Fi network, this function starts or stops the pre-heating function of the appliance. Follow the instructions on page 43 to register the appliance on the network. Set the oven mode knob to the Remote Start position to use the function. Sabbath mode is used on the Jewish Sabbath and Holidays. While the oven is in Sabbath mode, the timer, light, and alarm functions are disabled. If the oven light is on when the oven is put in Sabbath mode, it will remain on. Sabbath mode is only available when oven is in Bake mode. 4 Follow the directions in the smart phone application to set the cook mode, temperature, and run time (preheating time plus holding time). Adjusting the Oven Temperature 1 Press plus (+) or minus (-) once to enter the setting mode. Setting Remote Start 1 Open the oven door to make sure the oven is empty and ready for pre-heating. Do not place food in the oven. Close the oven door. 2 Turn the oven mode knob to select Remote Start. 3 When ON appears in the display, the Remote Start function is ready to use. NOTE app. Do not place food in oven before or during Remote Start run time. Remote Start is disconnected in the following situations:
Remote Start is never set up in the smart phone
The Remote Start status is OFF or door.
Remote Start experiences a problem during operation.
The Remote Start function cannot be started when the oven door is open. A beep alerts you to shut the door. Setting Sabbath Mode 1 Disconnect the probe. The prove function is not available in Sabbath mode. 2 Turn the oven mode knob to select Bake. 3 Set the desired temperature and cook time. 4 Press Start. 5 Touch and hold Start Time for three seconds. SB appears in the display when the Sabbath mode is activated. 6 To stop Sabbath mode, touch and hold Start Time for three seconds. To cancel the Bake function, set the oven mode knob to the Off position at any time. 2 To change the set temperature, press plus (+) or minus (-). Each press increases or decreases the set temperature by 5 degrees. 3 Press Start to accept the change. NOTE
If a cook time is set, the oven turns off automatically at the end of the cook time, without chiming. The oven remains in Sabbath mode, but is turned off.
If no cook time is set, the oven will not automatically turn off.
After a power failure, the display will turn back on in Sabbath mode, but the oven will be off.
Please always close the oven door first before engaging Sabbath Mode.
The oven does not beep and the display does not change while in Sabbath mode.
After 15 seconds, the oven adjusts its set temperature.
The cooktop cannot be used in Sabbath Mode. OPERATION 41 Warming Drawer food/power level recommendations Setting Food Item E N G L S H I Low 140 F (60 C)
Breakfast pastries (coffee cake,
Vegetables
Rice
Pasta muffins)
Dinner rolls
Plates of food
Heat-sensitive foods* (pancakes, pizza, eggs)
Meat* (if warming for 1-2 hours) Medium 160 F (71 C)
Smaller casseroles
Bacon or sausage
Warming empty ovenproof plates or serving dishes High
Meat* (if warming for less than an 180 F (82 C) hour)
Large casseroles
* Do not warm heat-sensitive foods for longer than 20 minutes. Do not put thin cuts of meat in the warming drawer as they will dry out. Different types of food may be placed in the warming drawer at the same time. For best results, do not leave food in the warming drawer for more than one hour. Do not leave smaller quantities or heat-sensitive food, such as eggs, in the warming drawer more than 30 minutes. The maximum operating time is three hours. Operating the Warming Drawer The Warming Drawer keeps hot cooked foods at serving temperature. All food placed in the Warming Drawer should be covered with an oven-safe lid or aluminum foil to maintain quality. Do not place foil on bottom or sides of drawer. Do not use plastic wrap to cover food. Plastic may melt onto the drawer and be very difficult to clean. Use only utensils and cookware recommended for oven use in the Warming Drawer. Setting the Warming Drawer Control 1 Press Warming Drawer Set/Off. The indicator light will flash. (If no further buttons are pressed within 25 seconds, the display will clear.) 2 Use the plus(+) or minus(-) button to set the for Medium, and for Low, power level:
for High. 3 When the food is ready, or to cancel, press Warming Drawer Set/Off. NOTE
The Warming Drawer shuts off automatically after three hours.
Do not heat cold food in the Warming Drawer.
Do not use pans or utensils with rough finishes in the Warming Drawer. Doing so can leave scratches on the inner drawer surfaces. GlideShut Drawer The drawer uses a spring and damper mechanism to absorb the impact when closing. Performance may vary based on the load in the drawer and how frequently it is used. A gentle tug may be necessary to overcome the damper mechanism at first when opening the drawer.
The weight of a lot of food in the drawer may work with the damper mechanism to prevent the drawer from closing completely. If this happens, push the drawer gently until the closing mechanism engages and pulls the drawer completely closed. 42 OPERATION CAUTION
Do not use the warming drawer for storage of racks, broiler pans, insert pans, plates, or utensils. The warming drawer contains a heating element which may damage any items not specifically designed to be used with it and should only be used to store cookware specifically supplied by LG with your range.
Do not put food or foil directly on the surface or base of the warming drawer. This may result in damage to your drawer and may spoil your food.
Do not place plastic wrap in the warming drawer or use it to cover food being heated in the warming drawer. Plastic may melt onto the drawer or surrounding areas and is very difficult to remove. Use only aluminum foil or cookware that is capable of withstanding baking temperature to heat or cover your food.
Do not use the warming drawer to heat water or any other liquids. Spilled liquids may cause an electrical short or result in severe personal injury, electric shock or death.
Never place plastics, paper, canned foods or other combustible material into the warming drawer. These items pose a severe risk of fire, damage and injury.
In the unlikely event that an item falls behind the warming drawer, always turn the power off and wait for the warming drawer to cool before retrieving the item. Never attempt to retrieve any items that fall behind the warming drawer without first turning the power off and ensuring the warming drawer cavity has cooled off. Failure to do so may result in severe personal injury, electric shock or death.
Do not touch the surface of the warming drawer while it is in operation. Use oven mitts or hot pads when inserting or removing food to avoid burns or other injury.
Do not leave food in the warming drawer for longer than one hour. Eating food which has been heated for too long at low temperatures can lead to food-borne illnesses. SMART FUNCTIONS LG ThinQ Application This feature is only available on models with the or logo. The LG ThinQ application allows you to communicate with the appliance using a smartphone. LG ThinQ Application Features Smart Diagnosis This function provides useful information for diagnosing and solving issues with the appliance based on the pattern of use. Settings Allows you to set various options on the oven and in the application. Monitoring This function shows the current status, remaining cook time, and cook settings on one screen. Push Alerts Turn on the Push Alerts to receive appliance status notifications. The notifications are triggered even if the LG ThinQ application is off. Timer You can set the timer from the application. Firmware Update Keep the appliance updated. NOTE
If you change your wireless router, Internet service provider, or password, delete the connected appliance from the LG ThinQ application and connect it again.
This information is current at the time of publication. The application is subject to change for product improvement purposes without notice to users.
This feature is only available on some models. SMART FUNCTIONS 43 Before Using LG ThinQ Application 1 Use a smartphone to check the strength of the wireless router (Wi-Fi network) near the appliance. E N G L S H I
If the appliance is too far from the router, the signal becomes weak. It may take a long time to connect or fail to install the application. 2 Turn off the Mobile data or Cellular Data on your smartphone. 3 Connect your smartphone to the wireless router. NOTE
To verify the Wi-Fi connection, check that the Wi-Fi icon on the control panel is lit.
The appliance supports 2.4 GHz Wi-Fi networks only. To check your network frequency, contact your Internet service provider or refer to your wireless router manual.
LG ThinQ is not responsible for any network connection problems or any faults, malfunctions, or errors caused by network connection.
The surrounding wireless environment can make the wireless network service run slowly.
If the appliance is having trouble connecting to the Wi-Fi network, it may be too far from the router. Purchase a Wi-Fi repeater (range extender) to improve the Wi-Fi signal strength.
The network connection may not work properly depending on the Internet service provider.
The Wi-Fi connection may not connect or may be interrupted because of the home network environment.
If the appliance cannot be connected due to problems with the wireless signal transmission, unplug the appliance and wait about a minute before trying again. 44 SMART FUNCTIONS NOTE
If the firewall on your wireless router is enabled, disable the firewall or add an exception to it.
The wireless network name (SSID) should be a combination of English letters and numbers. (Do not use special characters.)
Smartphone user interface (UI) may vary dependingon the mobile operating system (OS) and themanufacturer.
If the security protocol of the router is set to WEP, network setup may fail. Change the security protocol (WPA2 is recommended), and register the product again. Installing the LG ThinQ Application Search for the LG ThinQ application from the Google Play Store or Apple App Store on a smartphone. Follow instructions to download and install the application. Open Source Software Notice Information To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com. This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information. Wireless LAN Module (LCW-004) Specifications Frequency Range 2412~2462 MHz Output Power (max.)
< 30 dBm SMART FUNCTIONS 45 FCC RF Radiation Exposure Statement E N G L S H I This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20 cm (7.8 inches) between the antenna and your body. Users must follow the specific operating instructions for satisfying RF exposure compliance. FCC Notice The following notice covers the transmitter module contained in this product. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and also Part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15, Part 18 of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference and 2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 46 SMART FUNCTIONS Smart Diagnosis Feature This feature is only available on models with the Use this feature to help you diagnose and solve problems with your appliance. or icon. NOTE
For reasons not attributable to LGEs negligence, the service may not operate due to external factors such as, but not limited to, Wi-
Fi unavailability, Wi-Fi disconnection, local app store policy, or app unavailability.
The feature may be subject to change without prior notice and may have a different form depending on where you are located. Using LG ThinQ to Diagnose Issues If you experience a problem with your Wi-Fi equipped appliance, it can transmit troubleshooting data to asmartphone using the LG ThinQ application.
Launch the LG ThinQ application and selectthe Smart Diagnosis feature in the menu. Follow the instructions provided inthe LG ThinQ application. Using Audible Diagnosis to Diagnose Issues Follow the instructions below to use the audible diagnosis method.
Launch the LG ThinQ application and select the Smart Diagnosis feature in the menu. Follow the instructions for audible diagnosis provided in the LG ThinQ application. 1 Open the LG ThinQ application on the smart phone. 2 In the application, select the appliance from your list of connected appliances and then press the dots at the upper right of the screen. 3 Select Smart Diagnosis, then press the Start Smart Diagnosis button. NOTE
If the diagnosis fails several times, use the following instructions. 4 Select the Audible Diagnosis. 5 Follow the instructions on the smart phone. 6 Keep the phone in place until the tone transmission has finished. View the diagnosis on the phone. NOTE
For best results, do not move the phone while the tones are being transmitted. MAINTENANCE 47 Burned-On Residue 1 While the cooktop is still hot, remove any burnt on deposits or spilled food from the glass-ceramic cooking surface with a suitable metal razor scraper. (Similar to scraping paint off of a windowpane, it will not damage the decorated cooking surface.) Hold the scraper at an approximate 30 angle to the cooktop. E N G L S H I
Do not use a dull or nicked blade.
To prevent burns, wear an oven mitt or pot holder while using the metal scraper. 2 When the cooking surface has cooled down, apply a few dabs (about the size of a dime) of a ceramice glass cooktop cleaner in each burner area and work the cleaning cream over the cooktop surface with a damp paper towel. NOTE Approved cleaners
Weiman Cooktop Cleaning Cream
(www.weiman.com)
Cerama Bryte (www.ceramabryte.com)
Golden Ventures Cerama Bryte
Easy-Off 3 in 1 Glass Top Cleaner Spray
(www.easyoff.us) 3 Rinse with clean water and wipe the cooktop surface with a clean, dry paper towel.
Read and follow all instructions and warnings on the cleaning cream label. NOTE MAINTENANCE Cleaning the Glass-Ceramic Cooktop CAUTION
Do not use scrub pads or abrasive cleaning pads. They may damage your cooktop surface.
For your safety, wear an oven mitt or pot holder while using a scraper on the hot cooking surface. Use ceramic cooktop cleaner on the glass cooktop. Other creams may not be as effective or may scratch, damage or stain the cooktop surface. To maintain and protect the surface of the glass cooktop, follow these steps:
1 Before using the cooktop for the first time, clean it with a ceramic cooktop cleaner. This helps protect the top and makes cleanup easier. 2 Use ceramic cooktop cleaner daily to help keep the cooktop looking new. 3 Shake the cleaning cream well. Apply a few drops of cleaner directly to the cooktop. 4 Use a paper towel to clean the entire cooktop surface. 5 Rinse with clear water and use a dry cloth or paper towel to remove all cleaning residue. Do not heat the cooktop until it has been cleaned thoroughly. NOTE IMPORTANT If any sugar or food containing sugar (preserves, ketchup, tomato sauce, jellies, fudge, candy, syrups, chocolate) spills, or plastic or foil melts on the cooktop, remove the molten material IMMEDIATELY with a metal razor scraper (it will not damage the decorated cooking surface) while the cooking surface is still hot to avoid the risk of damage to the glass-ceramic surface. For your safety, please use an oven mitt or pot holder while scraping the hot cooking surface. NOTE Sugary spillovers(such as preserves, ketchup, tomato sauce, jellies, fudge, candy, syrups, chocolate) or melted plastics can cause pitting of the surface of your cooktop.
(Not covered by the warranty) LGs EasyClean enamel technology provides two cleaning options for the inside of the range. The EasyClean feature takes advantage of LGs new enamel to help lift soils without harsh chemicals, and it runs using ONLY WATER for just 10 minutes in low temperatures to help loosen LIGHT soils before hand-cleaning. While EasyClean is quick and effective for small and LIGHT soils, the Self Clean feature can be used to remove HEAVY, built up soils. The intensity and high heat of the Self Clean cycle may result in smoke which will require the opening up of windows to provide ventilation. Compared to the more intense Self Clean process, your LG oven gives you the option of cleaning with LESS HEAT, LESS TIME, and virtually NO SMOKE OR FUMES. When needed, the range still provides the self clean option for longer, more thorough oven cleaning for heavier, built up soils. Benefits of EasyClean
Helps loosen light soils before hand-cleaning
EasyClean only uses water; no chemical cleaners
Makes for a better self-clean experience
- Delays the need for a self-clean cycle
- Minimizes smoke and odors
- Can allow shorter self-clean time 48 MAINTENANCE Maintaining the Cooktop EasyClean DO NOT use chlorine bleach, ammonia, or other cleaners not specifically recommended for use on glass-ceramic cooktops. Let your glass-ceramic cooking surface cool off before cleaning. Wipe off with a damp towel and mild detergent Use a metal scraper Apply cooktop cleaning cream. Rub with a towel. Rinse with a damp towel, then wipe dry. Regular Recommended after each use Occasional Recommended every week Thorough Recommended for tough stains or burnt-on food For additional product information, visit our website at www.lg.com Metal Marks and Scratches 1 Be careful not to slide pots and pans across the cooktop. Doing so will leave metal markings on the cooktop surface. 2 To help remove these marks, use a ceramic cooktop cleaner with a cleaning pad for ceramic cooktops. CAUTION Cookware with rough or uneven bottoms can mark or scratch the cooktop surface.
Do not slide metal or glass across the cooktop
Do not use cookware with any dirt build-up on surface. the bottom. When to Use EasyClean Suggested Cleaning Method Example of Oven Soiling Soil Pattern Types of Common Food Items Soils That Can Soil Your Oven MAINTENANCE 49 E N G L S H I EasyClean Self Clean*
Small drops or spots Cheese or other ingredients Light splatter Fat/grease Pizza Steaks, broiled Fish, broiled Meat roasted at low temperatures Medium to heavy splatter Fat/grease Meat roasted at high temperatures Drops or spots Filling or sugar based soils Cream or tomato sauce Pies Casseroles EasyClean Instruction Guide 1 Remove oven racks and accessories from the oven. 2 Scrape off and remove any burnt-on debris with a plastic scraper. Suggested plastic scrapers:
Hard plastic spatula
Plastic pan scraper
Plastic paint scraper
Old credit card 3 Fill a spray bottle (10 oz or 300 ml) with water and use the spray bottle to thoroughly spray the inside surfaces of the oven. 4 Use at least 1/5 (2 oz or 60 ml) of the water in the bottle to completely saturate the soil on both the walls and in the corners of the oven.
* The Self Clean cycle can be used for soil that has been built up over time. Cleaning Tips
Allow the oven to cool to room temperature before using the EasyClean cycle. If your oven cavity is above 150 F (65 C), Hot will appear in the display, and the EasyClean cycle will not be activated until the oven cavity cools down.
A plastic spatula can be used as a scraper to scrape off any chunks or debris before and during oven cleaning.
Using the rough side of a non-scratch scouring pad may help to take off burnt-on stains better than a soft sponge or towel.
Certain non-scratch scrubbing sponges, such as those made of melamine foam, available at your local stores, can also help improve cleaning.
The range should be level to ensure that the bottom surface of the oven cavity is entirely covered by water at the beginning of the EasyClean cycle.
For best results, use distilled or filtered water. Tap water may leave mineral deposits on the oven bottom.
Soil baked on through several cooking cycles will be more difficult to remove with the EasyClean cycle.
Do not open the oven door during the EasyClean cycle. Water will not get hot enough if the door is opened during the cycle.
For hard to reach areas such as the back surface of the oven, it is better to use the Self Clean cycle. 10 Once the oven cavity is cleaned, wipe any excess water with a clean dry towel. Replace racks and any other accessories. 11 If some light soils remain, repeat the above steps, making sure to thoroughly soak the soiled areas. If stubborn soils remain after multiple EasyClean cycles, run the Self Clean cycle. Be sure that the oven cavity is empty of oven racks and other accessories, and that the oven cavity surface is dry before running the Self Clean cycle. Consult the Self Clean section of your owners manual for further details.
If you forget to saturate the inside of the oven with water before starting EasyClean, turn the Oven mode knob to the Off position to end the cycle. Wait for the range to cool to room temperature and then spray or pour water into the oven and start another EasyClean cycle.
The cavity gasket may be wet when the EasyClean cycle finishes. This is normal. Do not clean the gasket.
If mineral deposits remain on the oven bottom after cleaning, use a cloth or sponge soaked in vinegar to remove them.
It is normal for the fan to operate during the EasyClean cycle. 6 Close the oven door. Turn the oven mode knob to select EasyClean. Press Start. NOTE 50 MAINTENANCE 5 Spray or pour the remaining water (8 oz or 240 ml) onto the bottom center of the oven cavity. The indentation on the oven bottom should be fully covered to submerge all soils. Add water if necessary. NOTE If cleaning multiple ovens, use an entire bottle of water to clean each oven. Do not spray water directly on the door. Doing so will result in water dripping to the floor. CAUTION
Some surfaces may be hot after the EasyClean cycle. Wear rubber gloves while cleaning to prevent burns.
During the EasyClean cycle, the oven becomes hot enough to cause burns. Wait until the cycle is over before wiping the inside surface of the oven. Failure to do so may result in burns.
Avoid leaning or resting on the oven door glass while cleaning the oven cavity. 7 A tone will sound at the end of the 10 minute cycle. Turn the oven mode knob to the Off position to clear the display and end the tone. 8 After the cleaning cycle and during hand-
cleaning, enough water should remain on the oven bottom to completely submerge all soils. Add water if necessary. Place a towel on the floor in front of the oven to capture any water that may spill out during hand-cleaning. 9 Clean the oven cavity immediately after the EasyClean cycle by scrubbing with a wet, non-scratch scouring sponge or pad. (The scouring side will not scratch the finish.) Some water may spill into the bottom vents while cleaning, but it will be captured in a pan under the oven cavity and will not hurt the burner. NOTE Do not use any steel scouring pads, abrasive pads or cleaners as these materials can permanently damage the oven surface. Self Clean During the Self Clean cycle, the cooktop elements and warming drawer cannot be used. MAINTENANCE 51 E N G L S H I The Self Clean cycle uses extremely hot temperatures to clean the oven cavity. While running the Self Clean cycle, you may notice smoking or an odor. This is normal; especially if the oven is heavily soiled. During Self Clean, the kitchen should be well ventilated to minimize the odors from cleaning. Before Starting Self Clean
Remove the oven racks, broiler pan, broiler grid, all cookware, aluminum foil or any other material from the oven.
The kitchen should be well ventilated to minimize the odors from cleaning.
Wipe any heavy spillovers on the bottom of the oven.
Make sure that the oven light bulb cover is in place and the oven light is off.
The oven light cannot be turned on during a Self Clean cycle. The oven light cannot be turned on until the oven temperature has cooled below
CAUTION
Do not leave small children unattended near the appliance. During the Self Clean cycle, the outside of the range can become very hot to the touch.
If you have pet birds, move them to another well-ventilated room. The health of some birds is extremely sensitive to the fumes given off during the Self Clean cycle of any range.
Do not line the oven walls, racks, bottom or any other part of the range with aluminum foil or any other material. Doing so will destroy heat distribution, produce poor baking results and cause permanent damage to the oven interior
(aluminum foil will melt to the interior surface of the oven).
Do not force the door open. This can damage the automatic door locking system. Use care when opening the oven door after the Self Clean cycle. Stand to the side of the oven when opening the door to allow hot air or steam to escape. The oven may still be VERY HOT. NOTE
Remove oven racks and accessories before starting the Self Clean cycle.
If oven racks are left in the oven cavity during the Self Clean cycle, they will discolor and become difficult to slide in and out.
Clean the frame of the oven and door with hot soapy water. Rinse well.
Do not clean the gasket. The fiberglass material of the oven door gasket cannot withstand abrasion. It is essential for the gasket to remain intact. If you notice it becoming worn or frayed, replace it.
Wipe up any heavy spillovers on the oven bottom.
Make sure that the oven light bulb cover is in place and the oven light is off.
It is normal for the fan to operate during the Self Clean cycle.
The Burner On indicator light turns on when the knob is turned even if the cooktop element does not operate. Setting Self Clean The Self Clean function has cycle times of 3, 4, or 5 hours. Self Clean Soil Guide Soil Level Cycle Setting Lightly Soiled Oven Cavity 3-Hour Self Clean Moderately Soiled Oven Cavity 4-Hour Self Clean Heavily Soiled Oven Cavity 5-Hour Self Clean 1 Remove all racks and accessories from the oven. 2 Turn the oven mode knob to select Self Clean. The oven defaults to the recommended four-hour self clean for a moderately soiled oven. Press plus(+) or minus(-) to select a self clean time from 3 to 5 hours. 3 Press Start. 4 Once the self-clean cycle is set, the oven door locks automatically and the lock icon displays. You will not be able to open the oven door until the oven has cooled. The lock releases automatically when the oven has cooled. After the Self Clean Cycle
The oven door remains locked until the oven temperature has cooled.
You may notice some white ash in the oven. Wipe it off with a damp cloth or a soap-filled steel wool pad after the oven cools. If the oven is not clean after one self-clean cycle, repeat the cycle.
If oven racks were left in the oven and do not slide smoothly after a self-clean cycle, wipe racks and rack supports with a small amount of vegetable oil to make them glide more easily.
Fine lines may appear in the porcelain because it went through heating and cooling. This is normal and will not affect performance. NOTE
The Self Clean cycle cannot be started if the Lockout feature is active.
Once the Self Clean cycle is set, the oven door locks automatically. You will not be able to open the oven door until the oven is cooled. The lock releases automatically.
Once the door has been locked, the lock indicator light stops flashing and remains on. Allow about 15 seconds for the oven door lock to activate.
If the clock is set for a 12-hour display (default) the Delayed Self Clean can never be set to start more than 12 hours in advance.
After the oven is turned off, the convection fan keeps operating until the oven has cooled down. 52 MAINTENANCE CAUTION Do not force the oven door open when the lock icon is displayed. The oven door remains locked until the oven temperature has cooled. Forcing the door open will damage the door. Setting Self Clean with a Delayed Start 1 Remove all racks and accessories from the oven. 2 Turn the oven mode knob to select Self Clean. The oven defaults to the recommended four-hour self clean for a moderately soiled oven. Press plus(+) or minus(-) to select a self clean time from 3 to 5 hours. 3 Press Start Time. 4 Press plus(+) or minus(-) to enter the time of day you would like the Self Clean to start. 5 Press Start. NOTE It may become necessary to cancel or interrupt a Self Clean cycle due to excessive smoke or fire in the oven. To cancel the Self Clean function, turn the oven mode knob to the Off position. During Self Clean
The Self Clean cycle uses extremely hot temperatures to clean the oven cavity. While running the Self Clean cycle, you may notice smoking or an odor. This is normal, especially if the oven is heavily soiled.
As the oven heats, you may hear sounds of metal parts expanding and contracting. This is normal and will not damage the oven.
Do not force the oven door open when the lock is displayed. The oven door remains locked until the oven temperature has cooled. Forcing the door open will damage the door. Changing the Oven Light Cleaning the Exterior The oven light is a standard 40-watt, 120 V appliance bulb. It turns on when the oven door is open. When the oven door is closed, press Light to turn it on or off. 1 Unplug the range or disconnect power. 2 Turn the glass bulb cover in the back of the oven counterclockwise to remove. 3 Turn the bulb counterclockwise to remove it from the socket. 4 Insert the new bulb and turn it clockwise. 5 Insert the glass bulb cover and turn it clockwise. 6 Plug in the range or reconnect the power. MAINTENANCE 53 E N G L S H I Painted and Decorative Trim For general cleaning, use a cloth with hot soapy water. For more difficult soils and built-up grease, apply a liquid detergent directly onto the soil. Leave it on for 30 to 60 minutes. Rinse with a damp cloth and dry. Do not use abrasive cleaners. Stainless Steel Surfaces To avoid scratches, do not use steel wool pads. 1 Place a small amount of stainless steel appliance cleaner or polish on a damp cloth or paper towel. 2 Clean a small area, rubbing with the grain of the stainless steel if applicable. 3 Dry and buff with a clean, dry paper towel or soft cloth. 4 Repeat as necessary. Oven Door
Use soapy water to thoroughly clean the oven door. Rinse well. Do not immerse the door in water.
You may use a glass cleaner on the outside glass of the oven door. Do not spray water or glass cleaner on the door vents.
Do not use oven cleaners, cleaning powders, or harsh abrasive cleaning materials on the outside of the oven door.
Do not clean the oven door gasket. The oven door gasket is made of a woven material that is essential for a good seal. Care should be taken not to rub, damage, or remove this gasket. CAUTION Do not use harsh cleaners or harsh abrasive cleaning materials on the outside of the oven door. Doing so can cause damage. Dont hand clean oven door gasket Do hand clean door WARNING
Make sure that the oven and bulb are cool.
Disconnect the electrical power to the range at the main fuse or circuit breaker panel. Failure to do so can result in severe personal injury, death, or electrical shock. 54 MAINTENANCE Broiler Pan and Grid
Do not store a soiled broiler pan or grid anywhere CAUTION in the range.
Do not clean the broiler pan or grid in a self-cleaning mode.
Remove the grid from the pan. Carefully pour out the grease from the pan into a proper container.
Wash and rinse the broiler pan and grid in hot water with a soap-filled or plastic scouring pad.
If food has burned on, sprinkle the grid with cleaner while hot and cover with wet paper towels or a dishcloth. Soaking the pan will remove burned-on foods.
Both the broiler pan and grid may be cleaned with a commercial oven cleaner or in the dishwasher. Removing and Replacing the Lift-Off Oven Doors and Drawer
Be careful when removing and lifting the door. is very heavy.
Do not lift the door by the handle. The door Removing the Door 1 Fully open the door. 2 Unlock the hinge locks, rotating them as far toward the open door frame as they will go. Lock Unlock Slot Hinge lock 3 Firmly grasp both sides of the door at the top. 4 Close the door to the removal position
(approximately five degrees) which is halfway between the broil stop position and fully closed. If the position is correct, the hinge arms will move freely. about 5 5 Lift door up and out until the hinge arms are clear of the slots. Replacing the Door 1 Firmly grasp both sides of the door at the top. Removing the Drawer CAUTION 2 With the door at the same angle as the removal position, seat the indentation of the hinge arms into the bottom edge of the hinge slots. The notch in the hinge arms must be fully seated into the bottom edge of the slots. MAINTENANCE 55 E N G L S H I Disconnect the electrical power to the range at the main fuse or circuit breaker panel. Failure to do so can result in severe personal injury, death, or electrical shock. Most cleaning can be done with the drawer in place;
however, the drawer may be removed if further cleaning is needed. Use warm water to thoroughly clean. 1 Fully open the drawer. 2 Locate the glide lever on each side of the drawer. Push down on the left glide lever and pull up on the right glide lever. Indentation Lever Lever Hinge arm Bottom edge of slot 3 Open the door fully. If the door will not open fully, the indentation is not seated correctly in the bottom edge of the slots. 4 Lock the hinge locks, rotating them back toward the slots in the oven frame until they lock. Hinge arm Hinge lock 5 Close the oven door.
3 While holding both levers, carefully pull the drawer away from the range. Replacing the Drawer 1 Pull the bearing glides to the front of the chassis glide. 2 Align the glide on each side of the drawer with the glide slots on the range. 3 Push the drawer into the range until levers click
(approximately 2 inch). 4 Pull the drawer open again to seat bearing glides into position. Door Care Instructions Most oven doors contain glass that can break. CAUTION
Do not close the oven door until all the oven racks are fully in place.
Do not hit the glass with pots, pans, or any other object.
Scratching, hitting, jarring, or stressing the glass may weaken its structure causing an increased risk of breakage at a later time. 56 TROUBLESHOOTING TROUBLESHOOTING During convection cooking the fan stops when I open the door. Is that normal?
FAQs Yes, this is normal. When the door is opened, the convection fan will stop until the door is closed. What types of cookware are recommended for use with the cooktop?
Look for cookware that is marked "induction ready" or "induction capable" or that is specifically designed for induction cooking.
The cookware must have a magnetic metallic base. See the Induction Cookware Types section.
The pans must have a flat bottom and straight sides.
Only use heavy-gauge pans.
The pan size must match the amount of food to be prepared and the size of the surface element.
Use tight fitting lids.
Only use flat-bottom woks. Why do the heating elements appear to be turning ON and OFF during use of the cooktop or oven?
Depending on your cooktop element setting or the temperature selected in your oven it is NORMAL for the cooking elements to cycle on and off. My new oven doesnt cook like my old one. Is there something wrong with the temperature settings?
No, your oven has been factory tested and calibrated. For the first few uses, follow your recipe times and temperatures carefully. If you still think your new oven is too hot or too cold, you can adjust the oven temperature yourself to meet your specific cooking needs. Refer to the Oven Temperature Adjustment section in this manual for easy instructions on how to adjust your thermostat. Is it normal to hear a clicking noise coming from the back of my oven when I am using it?
Your new range is designed to maintain a tighter control over your ovens temperature. You may hear your ovens heating elements click on and off more frequently on your new oven. This is NORMAL. Why is the colon in the clock flashing?
This means that the product has just been plugged in, or that it has experienced a power interruption. To clear the flashing colon in the clock, press any key or reset the clock if needed. Can I use aluminum foil to catch drippings in my oven cavity?
Never use aluminum foil to line the bottom or sides of the oven or the warming drawer. The foil will melt and stick to the bottom surface of the oven and will not be removable. Use a sheet pan placed on a lower oven rack to catch drippings instead. (If foil has already melted onto the bottom of the oven, it will not interfere with the oven's performance.) Can I use aluminum foil on the racks?
Do not cover racks with aluminum foil. Covering entire racks with foil restricts air flow, leading to poor cooking results. Use a sheet pan lined with foil under fruit pies or other acidic or sugary foods to prevent spillovers from damaging the oven finish. CAUTION Foil may be used to wrap food in the oven or warming drawer, but do not allow the foil to come into contact with the exposed heating/broiling elements in the oven. The foil could melt or ignite, causing smoke, fire, or injury. Can I leave my racks in the oven when running a Self Clean cycle?
No. Although it will not damage the racks, it will discolor them and may make them hard to slide in and out during use. Remove all items from the oven before starting a Self Clean cycle. What should I do if my racks are sticky and have become hard to slide in and out?
Over time, the racks may become hard to slide in and out. Apply a small amount of olive oil to the ends of the racks. This will work as a lubricant for easier gliding. What should I do for hard to remove stains on my cooktop?
The cooktop should be cleaned after every use to prevent permanent staining. When cooking foods with high sugar content, such as tomato sauce, clean the stain off with a scraper while the cooktop is still warm. Use an oven mitt when scraping to prevent burns. Refer to the MAINTENANCE section of this owner's manual for further instruction. TROUBLESHOOTING 57 Why aren't the function buttons working?
Make sure that the range is not in Lockout mode. The will show in the display if Lockout is activated. lock To deactivate Lockout, press Probe (LSE4617 model only), or Clock for three seconds. The unlock melody sounds and Loc appears in the display until the controls are unlocked. Is it safe for my convection fan, broil burner or heater element to get wet during EasyClean?
Yes. The convection fan, broiler burner or heater element may get a little wet during cleaning. However, direct spray onto the broil burner and heater elements is not necessary because these are self-cleaning during regular use. E N G L S H I My range is still dirty after running the EasyClean cycle. What else should I do?
Do I need to use all 1 cups (10 oz or 300 ml) of water for EasyClean?
The EasyClean cycle only helps to loosen light soils in your oven range to assist in hand-cleaning of your oven. It does not automatically remove all soils after the cycle. Some scrubbing of your oven range is required after running the EasyClean cycle. Yes. It is highly recommended that 1 cup (8 oz or 240 ml) of water be sprayed or poured on the bottom and an additional cup (2 oz or 60 ml) of water be sprayed on walls and other soiled areas to fully saturate the soils for better cleaning performance. I tried scrubbing my oven after running EasyClean, but some soils still remain. What can I do?
The EasyClean feature works best when the soils are fully soaked and submerged in water before running the cycle and during hand-cleaning. If soils are not sufficiently soaked in water, it can negatively affect the cleaning performance. Repeat the EasyClean process using sufficient water. Sugar-based and certain greasy soils are especially hard to clean. If some stubborn soils remain, use the Self Clean feature to thoroughly clean your oven. Soils on my oven walls are not coming off. How can I get my walls clean?
Soils on the side and rear walls of your oven range may be more difficult to fully soak with water. Try repeating the EasyClean process with more than the cup (2 oz or 60 ml) spray recommended. Will EasyClean get all of the soils and stains out completely?
It depends on the soil type. Sugar-based and certain grease stains are especially hard to clean. Also, if stains are not sufficiently soaked in water, this can negatively affect cleaning performance. If stubborn or built-up stains remain, use the Self Clean feature. Refer to the Self Clean section of your owner's manual. Are there any tricks to getting some of the stubborn soils out?
Scraping the soils with a plastic scraper before and during hand-cleaning is recommended. Fully saturating soils with water is also recommended. However, certain types of soils are harder to clean than others. For these stubborn soils, the Self Clean cycle is recommended. Consult the Self Clean section of your owner's manual for details. I see smoke coming out of my oven ranges cooktop vents during EasyClean. Is this normal?
This is normal. This is not smoke. It is actually water vapor (steam) from the water in the oven cavity. As the oven heats briefly during EasyClean, the water in the cavity evaporates and escapes through the oven vents. How often should I use EasyClean?
EasyClean can be performed as often as you wish. EasyClean works best when your oven is LIGHTLY soiled from such things as LIGHT grease splatter and small drops of cheese. Please refer to the EasyClean section in your owner's manual for more information. What is required for EasyClean?
A spray bottle filled with 1 cups (10 oz or 300 ml) of water, a plastic scraper, a non-scratch scrubbing pad and a towel. You should not use abrasive scrubbers such as heavy-duty scouring pads or steel wool. Except for a towel, all of the materials you need are included in a special cleaning kit with your new range. How can I help keep children safe around the range?
Children should be supervised around the range whenever it is in use, and after use until surfaces have cooled. You can also use the Lockout feature to help prevent children from accidentally turning on the cooktop or oven. The Lockout feature disables most control panel buttons and the cooktop control knobs. On some models, it also locks the oven door. Consult the Lockout section of your owners manual for details.
(In models without a self-clean option, the Lockout feature locks the controls but does not lock the oven door.) 58 TROUBLESHOOTING Before Calling for Service Before you call for service, review this list. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance. Symptoms Possible Causes / Solutions
Poor installation. Place oven rack in center of oven. Place a level on the oven rack. Adjust leveling legs at base of range until the oven rack is level.
Be sure floor is level and strong and stable enough to adequately support range.
If floor is sagging or sloping, contact a carpenter to correct the situation.
Kitchen cabinet alignment may make range appear unlevel. Be sure cabinets are square and have sufficient room for range clearance.
Cabinets not square or are built in too tightly. Contact builder or installer to make
Carpet interferes with range. Provide sufficient space so range can be lifted over Range is not level. Cannot move appliance easily. Appliance must be accessible for service. appliance accessible. carpet.
Anti-tip device engaged. Oven control beeps and displays any F code error.
Electronic control has detected a fault condition. Turn the Oven mode knob to the Off position to clear the display and stop beeping. Reprogram oven. If fault recurs, record fault number. Turn the Oven mode knob to the Off position and call for service. CODE CAUSE F-3 F-9 Key short error Oven not heating Surface element control beeps and entire LED bar flashes.
Electric control has detected a fault condition. Turn the control knob to the Off position to clear the display and stop the beeping. Call for service. Number of Flashes CAUSE 1 2 3 4 Top Thermistor Open/Short Heatsink Thermistor Open/
Short Communication error Box fan not working Surface units will not maintain a rolling boil or cooking is not fast enough
Improper cookware being used.
- Use pans which are flat and match the diameter of the surface unit selected.
In some areas, the power(voltage) may be low.
- Cover pan with a lid until desired heat is obtained. Surface units do not work properly
A fuse in your home may be blown or the circuit breaker tripped.
- Replace the fuse or reset the circuit breaker.
Cooktop controls improperly set.
- Check to see the correct control is set for the surface unit you are using.
Cookware is the wrong size or is not induction capable.
- See Induction Cookware section for more information.
The maximum operating time for all element levels except the Boost mode is 12 hours. Areas of discoloration on the cooktop
Food spillovers not cleaned before next use.
- See Cleaning the Glass-Ceramic Cooktop section.
Hot surface on a model with a light-colored cooktop.
- This is normal. The surface may appear discolored when it is hot. This is temporary and will disappear as the glass cools. TROUBLESHOOTING 59 E N G L S H I Symptoms Frequent cycling on and off of surface units Oven will not work Steam is exhausted through the oven vent. Appliance does not operate. Oven light does not work. Oven smokes excessively during broiling. Food does not bake or roast properly Possible Causes / Solutions
This is normal.
- The element will cycle on and off to maintain the heat setting.
Plug on range is not completely inserted in the electrical outlet.
- Make sure electrical plug is plugged into a live, properly grounded outlet.
A fuse in your home may be blown or the circuit breaker tripped.
- Replace the fuse or reset the circuit breaker.
Oven controls improperly set.
- See the Using the Oven section.
Oven too hot.
- Allow the oven to cool to below locking temperature.
Cooking foods with high moisture produces steam. This is normal.
Make sure cord is plugged correctly into outlet. Check circuit breakers.
Service wiring is not complete. Contact your electrician for assistance.
Power outage. Check house lights to be sure. Call your local electric company
Replace or tighten bulb. See Changing the Oven Light section in this Owners for service. Manual.
Control not set properly. Follow instructions under Setting Oven Controls.
Meat too close to the element. Reposition the rack to provide proper clearance between the meat and the element. Preheat broil element for searing.
Meat not properly prepared. Remove excess fat from meat. Cut remaining fatty edges to prevent curling.
Insert on broiler pan wrong side up and grease not draining. Always place grid on the broiler pan with ribs up and slots down to allow grease to drip into pan.
Grease has built up on oven surfaces. Regular cleaning is necessary when broiling frequently.
- Old grease or food spatters cause excessive smoking.
Oven controls improperly set.
- See the Using the Oven section.
Rack position is incorrect or the rack is not level.
- See the Using the Oven section.
Incorrect cookware or cookware of improper size being used.
- See the Using the Oven section.
Oven sensor needs to be adjusted.
- See Oven Temperature Adjustment in the Features section.
Oven controls improperly set.
- Make sure you turn the oven mode knob to select the Broil mode. Food does not broil properly
Aluminum foil used on the broiling pan and grid has not been fitted properly and
Improper rack position being used.
- See the Broiling Guide.
Cookware not suited for broiling.
- Use broiling pan and grid. slit as recommended.
- See the Using the Oven section.
In some areas the power voltage may be low.
- Preheat the broil element for 5-7 minutes.
- See the Broiling Guide. 60 TROUBLESHOOTING Symptoms Possible Causes / Solutions Oven temperature too hot or too cold
Oven sensor needs to be adjusted.
- See Oven Temperature Adjustment in the Features section. Scratches or abrasions on cooktop surface Metal marks
Coarse particles such as salt or sand between cooktop and utensils can cause scratches. Be sure the cooktop surface and bottoms of utensils are clean before using. Small scratches do not affect cooking and will become less visible with time.
Cleaning materials not recommended for glass-ceramic cooktop have been used. See Cleaning the Glass-Ceramic Cooktop in the MAINTENANCE section.
Cookware with rough bottom has been used. Use smooth, flat-bottomed cookware.
Scraping of metal utensils on cooktop surface. Do not slide metal utensils on cooktop surface. Use a glass-ceramic cooktop cleaning creme to remove the marks. See Cleaning the Glass-Ceramic Cooktop in the MAINTENANCE section. Brown streaks or specks
Boilovers are cooked onto surface. Use a blade scraper to remove soil. See Cleaning the Glass-Ceramic Cooktop in the MAINTENANCE section. Areas of discoloration on cooktop
Mineral deposits from water and food. Remove using a glass-ceramic cooktop cleaning creme. Use cookware with clean, dry bottoms.
The oven temperature is too high to set a Self Clean operation.
- Allow the range to cool and reset the controls. Oven will not Self Clean
Oven controls improperly set.
- See the Self Clean section.
A Self Clean cycle cannot be started if the oven lockout feature is active.
This is the sound of the metal heating and cooling during both the cooking and Crackling or popping sound Self Clean functions.
- This is normal. Fan noise
- This is normal.
The convection fan and cooktop fan may automatically cycle on and off.
The cooktop fan may turn on to reduce the temperature of the product, even when the surface elements are not being used. Convection Fan stops
- This is normal and is done to allow for more even heating during the cycle. This is not a failure of the range and should be considered normal operation.
Convection fan stops during a convection bake cycle. Displayed colon in the clock is flashing
This is normal. This means that the product has just been plugged in, or that it has experienced a power interruption. Press Cook Time for three seconds and reset the clock, or press any key to stop the flashing. Excessive smoking during a Self Clean cycle Oven door does not open after a Self Clean cycle
Excessive soil.
- Turn the oven mode knob to the Off position. Open the windows to rid the room of smoke. Wait until the Self Clean mode is cancelled. Wipe up the excess soil and reset the clean.
Oven is too hot.
- Allow the oven to cool below locking temperature.
Allow about one hour for the oven to cool after the completion of a Self Clean cycle. The door can be opened when the lock is no longer displayed.
The control and door may be locked. TROUBLESHOOTING 61 E N G L S H I Symptoms Possible Causes / Solutions The oven does not clean after a Self Clean cycle
Oven controls not properly set.
- See the Self Clean section.
Oven was heavily soiled.
- Clean up heavy spillovers before starting the clean cycle. Heavily soiled ovens may need to Self Clean again or for a longer period of time. CLEAN and door flash in the display
- Close the oven door.
The Self Clean cycle has been selected, but the door is not closed. LOCKED is on in the display when you want to cook
The oven door is locked because the temperature inside the oven has not dropped below the locking temperature.
- Turn the oven mode knob to the Off position. Allow the oven to cool. Burning or oily odor emitting from the vent Oven racks are difficult to slide Moisture collects on oven window or steam comes from oven vent
This is normal in a new oven and will disappear in time.
- To speed the process, set a Self Clean cycle for a minimum of 3 hours. See the Self Clean section.
The shiny, silver-colored racks were cleaned in a Self Clean cycle.
- Apply a small amount of vegetable oil to a paper towel and wipe the edges of the oven racks with the paper towel.
This is normal when cooking foods high in moisture.
Excessive moisture was used when cleaning the window.
If the appliance is having trouble connecting to the Wi-Fi network, it may be too far from the router. Purchase a Wi-Fi repeater (range extender) to improve the Wi-Fi signal strength.
The Wi-Fi connection may not connect or may be interrupted because of the Wifi network does not connect properly. home network environment.
The network connection may not work properly depending on the internet service Surface elements frequently cycle on and off. Trouble connecting appliance and smartphone to Wi-Fi network provider. run slowly.
The surrounding wireless environment can make the wireless network service
The element will cycle on and off to maintain level of power it has been set at. This is normal operation and not a system failure.
The password for the Wi-Fi network was entered incorrectly.
- Delete your home Wi-Fi network and begin the registration process again.
Mobile data for your smartphone is turned on.
- Turn off the Mobile data on your smartphone before registering the appliance.
The wireless network name (SSID) is set incorrectly.
- The wireless network name (SSID) should be a combination of English letters and numbers. (Do not use special characters.)
The router frequency is not 2.4 GHz.
- Only a 2.4 GHz router frequency is supported. Set the wireless router to 2.4 GHz and connect the appliance to the wireless router. To check the router frequency, check with your Internet service provider or the router manufacturer.
The distance between the appliance and the router is too far.
- If the appliance is too far from the router, the signal may be weak and the connection may not be configured correctly. Move the router closer to the appliance or purchase and install a Wi-Fi repeater. 62 LIMITED WARRANTY LIMITED WARRANTY (USA) ARBITRATION NOTICE: THIS LIMITED WARRANTY CONTAINS AN ARBITRATION PROVISION THAT REQUIRES YOU AND LG TO RESOLVE DISPUTES BY BINDING ARBITRATION INSTEAD OF IN COURT, UNLESS YOU CHOOSE TO OPT OUT. IN ARBITRATION, CLASS ACTIONS AND JURY TRIALS ARE NOT PERMITTED. PLEASE SEE THE SECTION TITLED PROCEDURE FOR RESOLVING DISPUTES BELOW. Should your LG Electric Range ("Product") fail due to a defect in materials or workmanship under normal and proper use, during the warranty period set forth below, LG Electronics (LG) will, at its option, repair or replace the Product. This limited warranty is valid only to the original retail purchaser of the Product and applies only when purchased and used within the United States including U.S. Territories. Warranty Period Scope of Warranty HOW SERVICE IS HANDLED Two (2) year from date of original retail purchase Parts and Labor
(internal / functional parts only) LG will provide, free of charge, all labor and in-home service to replace defective part(s).
Replacement products and parts are warranted for the remaining portion of the original warranty period or ninety (90) days, whichever is greater.
Replacement products and parts may be new, reconditioned, refurbished, or otherwise factory remanufactured.
Proof of original retail purchase specifying the Product model and date of purchase is required to obtain warranty service under this limited warranty. EXCEPT TO THE EXTENT PROHIBTED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THE PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THE ABOVE LIMITED WARRANTY. UNDER NO CIRCUMSTANCES SHALL LG OR ITS U.S. DISTRIBUTORS/DEALERS BE LIABLE FOR ANY INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL, OR PUNITIVE DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST GOODWILL, LOST REVENUES OR PROFITS, WORK STOPPAGE, IMPAIRMENT OF OTHER GOODS, COST OF REMOVAL AND REINSTALLATION OF THE PRODUCT, LOSS OF USE, OR ANY OTHER DAMAGES WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE. LGS TOTAL LIABILITY, IF ANY, SHALL NOT EXCEED THE PURCHASE PRICE PAID BY YOU FOR THE PRODUCT. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This limited warranty gives you specific legal rights and you may also have other rights that vary from state to state. THIS LIMITED WARRANTY DOES NOT COVER:
Service trips to deliver, pick up, or install, educate how to operate, correct wiring, or correct unauthorized
Damage or failure of the Product to perform during power failures and interrupted or inadequate electrical
Damage or failure resulting from operating the Product in a corrosive atmosphere or contrary to the Product
Damage or failure to the Product caused by accidents, pests and vermin, lightning, wind, fire, floods, acts of God, or any other causes beyond the control of LG.
Damage or failure caused by unauthorized modification or alteration, or if used for other than the intended repairs. service. owners manual. purpose.
Damage or failure resulting from misuse, abuse, improper installation, repair, or maintenance. Improper repair includes use of parts not authorized by LG. Improper installation or maintenance includes installation or maintenance contrary to the Product owners manual.
Damage or failure caused by incorrect electrical current, voltage, or ventilation/plumbing codes.
Damage or failure caused by transportation and handling, including scratches, dents, chips, and/or other damage to the finish of the Product, unless such damage is reported within one (1) week of delivery.
Damage or missing items to any display, open box, or discounted Product.
Refurbished Product or any Product sold As Is, Where Is, With all Faults, or similar disclaimer.
Products with original serial numbers that have been removed, altered, or cannot be readily determined.
Increases in utility costs and additional utility expenses. LIMITED WARRANTY 63
Any noises associated with normal operation.
Use of accessories, components, or consumable cleaning products that are not authorized by LG.
Replacement of light bulbs, filters, or any consumable parts.
When Product is used for other than normal and proper household use (e.g. commercial or industrial use, offices, and recreational facilities or vehicles) or contrary to the Products owners manual.
Costs associated with removal and reinstallation of your Product for repairs.
Shelves, drawers and accessories, except for internal/functional parts covered under this limited warranty. E N G L S H I Not Covered by this Limited Warranty Problem Cause Prevention
Cooktop crack Cooktop crack caused by impact of object primary crack
DO NOT store heavy items above the cooktop surface as they could fall and damage it.
DO NOT scratch the cooktop or the cooktop could crack.
Clean the cooktop before and after using. Mechanical breakage secondary crack out of warranty in warranty
Damage caused after delivery
(Not covered by warranty)
Cooktop enamel chipping off Improper usage
Do not hit the enamel cooktop.
Pitting of the cooktop
If not removed immediately, sugary spillovers glass
(such as preserves, ketchup, tomato sauce, jellies, fudge, candy, syrups, or chocolate) or melted plastic or foil can cause surface pitting of the cooktop. (Not covered by warranty)
Unit has no power 1. House power turned off (power supply) 2. Tripped breaker 3. The power cord is not installed properly. 3-WIRE HOOK UP 4-WIRE HOOK UP Black White Red Black White Red cord
Remove the molten material IMMEDIATELY with a metal razor scraper.
For safety, wear an oven mitt or hot pad while scraping the hot surface.
Check power at main board before calling for service.
Match power cord type and outlet type
Properly install the power O U T E R W I R E
C N E E N U T T E R R A W L
) I R E O U T E R W R E I GROUND STRAP B L A C K W I R E
N W H I E U T T E R W A L
) I R E R E D W R E I REMOVE GROUND STRAP G R E E N G R O U N D W R E I
<NEMA 10-50>
<NEMA 14-50>
64 LIMITED WARRANTY Problem Cause Prevention
Oven or racks are stained after using aluminum foil Aluminum foil has melted in the oven
Never cover the oven bottom or cover an entire rack with materials such as aluminum foil.
If the foil has already melted onto the oven, it will not affect the performance of the oven.
Surface is not level 1. Range not leveled
Check with installer first
Oven is tipping 2. Anti-tip device not installed correctly Level both sides of range Approximately 0.65"
(16.5 mm) Wall plate Anti-tip bracket Screw must enter wood or concrete Use carpenters level to check level. 2 1 The cost of repair or replacement under the above excluded circumstances shall be borne by the consumer. TO OBTAIN WARRANTY SERVICE AND ADDITIONAL INFORMATION Call 1-800-243-0000 and select the appropriate option from the menu. Or visit our website at http://www.lg.com Or by mail: LG Electronics Customer Service P.O. Box 240007 Huntsville, AL 35813 ATTN: CIC PROCEDURE FOR RESOLVING DISPUTES:
ALL DISPUTES BETWEEN YOU AND LG ARISING OUT OF OR RELATING IN ANY WAY TO THIS LIMITED WARRANTY OR THE PRODUCT SHALL BE RESOLVED EXCLUSIVELY THROUGH BINDING ARBITRATION, AND NOT IN A COURT OF GENERAL JURISDICTION. BINDING ARBITRATION MEANS THAT YOU AND LG ARE EACH WAIVING THE RIGHT TO A JURY TRIAL AND TO BRING OR PARTICIPATE IN A CLASS ACTION. Definitions. For the purposes of this section, references to LG mean LG Electronics U.S.A., Inc., its parents, subsidiaries and affiliates, and each of their officers, directors, employees, agents, beneficiaries, predecessors in interest, successors, assigns and suppliers; references to dispute or claim shall include any dispute, claim or controversy of any kind whatsoever (whether based in contract, tort, statute, regulation, ordinance, fraud, misrepresentation or any other legal or equitable theory) arising out of or relating in any way to the sale, condition or performance of the product or this Limited Warranty. Notice of Dispute. In the event you intend to commence an arbitration proceeding, you must first notify LG in writing at least 30 days in advance of initiating the arbitration by sending a letter to LG at LG Electronics, USA, Inc. Attn: Legal Department- Arbitration 1000 Sylvan Ave, Englewood Cliffs 07632. You and LG agree to engage in good faith discussions in an attempt to amicably resolve your claim. The notice must provide your name, address, and telephone number; identify the product that is the subject of the claim; and describe the nature of the claim and the relief being sought. If you and LG are unable to resolve the dispute within 30 days, either party may proceed to file a claim for arbitration. LIMITED WARRANTY 65 Agreement to Binding Arbitration and Class Action Waiver. Upon failure to resolve the dispute during the 30 day period after sending written notice to LG, you and LG agree to resolve any claims between us only by binding arbitration on an individual basis, unless you opt out as provided below. Any dispute between you and LG shall not be combined or consolidated with a dispute involving any other persons or entitys product or claim. More specifically, without limitation of the foregoing, any dispute between you and LG shall not under any circumstances proceed as part of a class or representative action. Instead of arbitration, either party may bring an individual action in small claims court, but that small claims court action may not be brought on a class or representative basis. E N G L S H I Arbitration Rules and Procedures. To begin arbitration of a claim, either you or LG must make a written demand for arbitration. The arbitration will be administered by the American Arbitration Association (AAA) and will be conducted before a single arbitrator under the AAAs Consumer Arbitration Rules that are in effect at the time the arbitration is initiated (referred to as the AAA Rules) and under the procedures set forth in this section. The AAA Rules are available online at www.adr.org/consumer. Send a copy of your written demand for arbitration, as well as a copy of this provision, to the AAA in the manner described in the AAA Rules. You must also send a copy of your written demand to LG at LG Electronics, USA, Inc. Attn: Legal Department- Arbitration 1000 Sylvan Avenue Englewood Cliffs, NJ 07632. If there is a conflict between the AAA Rules and the rules set forth in this section, the rules set forth in this section will govern. This arbitration provision is governed by the Federal Arbitration Act. Judgment may be entered on the arbitrators award in any court of competent jurisdiction. All issues are for the arbitrator to decide, except that issues relating to the scope and enforceability of the arbitration provision and to the arbitrability of the dispute are for the court to decide. The arbitrator is bound by the terms of this provision. Governing Law. The law of the state of your residence shall govern this Limited Warranty and any disputes between us except to the extent that such law is preempted by or inconsistent with applicable federal law. Fees/Costs. You do not need to pay any fee to begin an arbitration. Upon receipt of your written demand for arbitration, LG will promptly pay all arbitration filing fees to the AAA unless you seek more than $25,000 in damages, in which case the payment of these fees will be governed by the AAA Rules. Except as otherwise provided for herein, LG will pay all AAA filing, administration and arbitrator fees for any arbitration initiated in accordance with the AAA Rules and this arbitration provision. If you prevail in the arbitration, LG will pay your attorneys fees and expenses as long as they are reasonable, by considering factors including, but not limited to, the purchase amount and claim amount. Notwithstanding the foregoing, if applicable law allows for an award of reasonable attorneys fees and expenses, an arbitrator can award them to the same extent that a court would. If the arbitrator finds either the substance of your claim or the relief sought in the demand is frivolous or brought for an improper purpose (as measured by the standards set forth in Federal Rule of Civil Procedure 11(b)), then the payment of all arbitration fees will be governed by the AAA Rules. In such a situation, you agree to reimburse LG for all monies previously disbursed by it that are otherwise your obligation to pay under the AAA Rules. Except as otherwise provided for, LG waives any rights it may have to seek attorneys fees and expenses from you if LG prevails in the arbitration. Hearings and Location. If your claim is for $25,000 or less, you may choose to have the arbitration conducted solely on the basis of (1) documents submitted to the arbitrator, (2) through a telephonic hearing, or (3) by an in-person hearing as established by the AAA Rules. If your claim exceeds $25,000, the right to a hearing will be determined by the AAA Rules. Any in-person arbitration hearings will be held at a location within the federal judicial district in which you reside unless we both agree to another location or we agree to a telephonic arbitration. Opt Out. You may opt out of this dispute resolution procedure. If you opt out, neither you nor LG can require the other to participate in an arbitration proceeding. To opt out, you must send notice to LG no later than 30 calendar days from the date of the first consumer purchasers purchase of the product by either: (i) sending an e-mail to optout@lge.com, with the subject line: Arbitration Opt Out or (ii) calling 1-800-980-2973. You must include in the opt out e-mail or provide by telephone: (a) your name and address; (b) the date on which the product was purchased; (c) the product model name or model number; and (d) the serial number (the serial number can be found (i) on the product; or (ii) online by accessing https://www.lg.com/us/support/repair-service/schedule-repair-
continued and clicking on Find My Model & Serial Number). You may only opt out of the dispute resolution procedure in the manner described above (that is, by e-mail or telephone); no other form of notice will be effective to opt out of this dispute resolution procedure. Opting out of this dispute resolution procedure will not affect the coverage of the Limited Warranty in any way, and you will continue to enjoy the full benefits of the Limited Warranty. If you keep this product and do not opt out, then you accept all terms and conditions of the arbitration provision described above. 66 MEMO MEMO LG Customer Information Center 1-800-243-0000 USA Register your product Online!
www.lg.com Printed in Korea
1 | label | ID Label/Location Info | 230.72 KiB | June 16 2020 |
Order Number
: GETEC-C1-20-016 Test Report Number
: GETEC-E3-20-001 FCC Part 18 Page 1 / 2 APPENDIX B
: ID SAMPLE LABEL & LOCATION EUT Type: HOUSEHOLD ELECTRIC RANGE FCC ID.: BEJS47423E Order Number
: GETEC-C1-20-016 Test Report Number
: GETEC-E3-20-001 FCC Part 18 Page 2 / 2 LABELLING REQUIREMENTS The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time of purchase. ID Label ID Label Location of EUT ID Label EUT Type: HOUSEHOLD ELECTRIC RANGE FCC ID.: BEJS47423E
1 | Cover Letter - Agency Authorization | Cover Letter(s) | 166.72 KiB | June 16 2020 |
Order Number
: GETEC-C1-20-016 Test Report Number
: GETEC-E3-20-001 FCC Part 18 Page 1 / 1 APPENDIX A
: ATTESTATION STATEMENT EUT Type: HOUSEHOLD ELECTRIC RANGE FCC ID.: BEJS47423E Mar. 01, 2020 Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S.A. To whom it may concern:
We, the undersigned, hereby authorize GUMI University EMC Center to act on our behalf in all matters relating to applications for equipment authorization, including the signing of all documents relation to these matter. Any and all acts carried out by GUMI University EMC Center on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to the application is subject of a denial of benefits, including FCC benefits, pursuant 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Sincerely, _________________________________________ Kyung-Su Han, Director LG Electronics USA
1 | SCS-F19 Confidentiality Request Letter (Ver 6.0) | Cover Letter(s) | 38.63 KiB | June 16 2020 |
775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: sales.eaw@us.bureauveritas.com Confidentiality Request Letter Revision History From Reason for Amendment (current / obsolete) Initial Release (obsolete) Adding CFR 2.459 (obsolete) Updated company template & Added text box Added IC confidentiality letter form (obsolete) Corrections to STC form. Added reference to KDB
(obsolete)
(obsolete) Updated company logo (current) 1.0 1.0 2.0 3.0 4.0 5.0 To 1.0 2.0 3.0 4.0 5.0 6.0 Approved Date Nov-14-2006 August 11 - 2008 Jan-31-2012 March-26-2015 Nov-19-2015 Jun-26-2019 LG Electronics USA 1000 Sylvan Avenue, Englewood Cliffs, NJ 07632, USA Jun. 04, 2020 To:
Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: BEJS47423E Pursuant to sections 0.457 and 0.459 of CFR 47, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application as:
- Block Diagram
- Operational Description
- Schematic Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Clients signature:
Clients name: Kyung-Su Han / Director Contact information: 201-472-2623
/ address: 111 Sylvan Avenue, Englewood Cliffs, NJ 07632, USA SCS-F19: Confidentiality Request Letter Page 2 of 3 Rev 6.0 LG Electronics USA 1000 Sylvan Avenue, Englewood Cliffs, NJ 07632, USA Jun. 04, 2020 To: Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Short Term Confidentiality Request for FCC ID: BEJS47423E To Whom It May Concern:
Pursuant to sections 0.457 and 0.459 of CFR 47, and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 days; or for a specified date of not to exceed 180 days from the Grant Date. See KDB 726920. or 180
- User Manual
- Test Setup Photos
- External Photos
Internal Photos The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, Clients signature:
Clients name: Kyung-Su Han / Director Contact information: 201-472-2623
/ address: 111 Sylvan Avenue, Englewood Cliffs, NJ 07632, USA SCS-F19: Confidentiality Request Letter Page 3 of 3 Rev 6.0
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2020-06-16 | 0.02 ~ 0.08 | 8CC - Part 18 Consumer Device | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2020-06-16
|
||||
1 | Applicant's complete, legal business name |
LG Electronics USA
|
||||
1 | FCC Registration Number (FRN) |
0020917688
|
||||
1 | Physical Address |
111 Sylvan Avenue North Building
|
||||
1 |
111 Sylvan Avenue
|
|||||
1 |
Englewood Cliffs, NJ
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
t******@bureauveritas.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
BEJ
|
||||
1 | Equipment Product Code |
S47423E
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
K****** H********
|
||||
1 | Title |
Director, Standards & Compliance
|
||||
1 | Telephone Number |
201-4********
|
||||
1 | Fax Number |
201-8********
|
||||
1 |
k******@lge.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 07/31/2020 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | 8CC - Part 18 Consumer Device | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | HOUSEHOLD ELECTRIC RANGE | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
GUMI UNIVERSITY EMC CENTER
|
||||
1 | Name |
T****** P******
|
||||
1 | Telephone Number |
82-54********
|
||||
1 | Fax Number |
82-54********
|
||||
1 |
t******@gumi.ac.kr
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 18 | 0.02000000 | 0.08000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC