FCC ID: BEJ42LG30DCUA LCD TV/MONITOR

 

LCD TV OWNERS MANUAL PLASMA TV PLASMA TV MODELS 42PG60C LCD TV MODELS 32LG30DC 37LG30DC 42LG30DC 47LG50DC 52LG50DC Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. P/NO : SAC307080? (0805-REV00) www.lgcommercial.com ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency (EPA). As an ENERGY STAR Partner LG Electronics USA, Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. FCC NOTICE Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the litera-

ture accompanying the appliance. WARNING/CAUTION TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE TO CABLE/TV INSTALLER CAUTION This reminder is provided to call the CATV system installers attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the users authority to operate this product 2 SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. 6 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 1 2 Do not use this apparatus near water. Clean only with dry cloth. 7 Only use attachments/accessories specified by the manufacturer. 3 Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus com-

bination to avoid injury from tip-over. 4 5 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)that produce heat. 9 Unplug this apparatus during lighting storms or when unused for long periods of time. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-

supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 3 SAFETY INSTRUCTIONS 11 Never touch this apparatus or antenna during a thunder or lighting storm. 15 12 13 14 When mounting a TV on the wall, make sure not to install the TV by the hanging power and signal cables on the back of the TV. Do not allow an impact shock or any objects to fall into the product, and do not drop onto the screen with something. CAUTION concerning the Power Cord:

It is recommend that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not make the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV. 4 WARNING - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles or expose the TV to direct air conditioning. 16 Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit). 17 18 19 GGRROOUUNNDDIINNGG Ensure that you connect the earth ground wire to prevent possible electric shock. (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet) If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. Power Supply Short-circuit Breaker DDIISSCCOONNNNEECCTTIINNGG DDEEVVIICCEE FFRROOMM MMAAIINNSS Mains plug is the disconnecting device. The plug must remain readily operable. Keep the product away from direct sunlight. 22 23 MMoovviinngg Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press against or put stress on the front panel of the TV. VVeennttiillaattiioonn Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials (e.g.) plastic while plugged in. Do not install in excessively dusty places. 24 If you smell smoke or other odors coming from the TV or hear strange sounds, unplug the power cord contact an authorized service center. 20 AANNTTEENNNNAASS OOuuttddoooorr aanntteennnnaa ggrroouunnddiinngg If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code

(NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode. AAnntteennnnaa ggrroouunnddiinngg aaccccoorrddiinngg ttoo tthhee NNaattiioonnaall EElleeccttrriiccaall CCooddee,, AANNSSII//NNFFPPAA 7700 Ground Clamp Antenna Lead in Wire Electric Service Equipment NEC: National Electrical Code Antenna Discharge Unit

(NEC Section 810-20) Grounding Conductor

(NEC Section 810-21) Ground Clamps Power Service Grounding Electrode System (NEC Art 250, Part H) 20 CClleeaanniinngg When cleaning, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzene. 5 CONTENTS WARNING / CAUTION . 2 Channel Setup

- Auto Scan (Auto Tuning) . 52

- Add / Delete Channel (Manual Tuning) . 53

- Channel Editing . 54 Input List . 55 Input Label . 56 AV Mode . 57 SIMPLINK . 58 USB Entry Modes . 60 Photo List . 61 Music List . 65 PICTURE CONTROL Picture Size (Aspect Ratio) Control . 68 Preset Picture Settings

- Picture Mode - Preset . 70

- Color Tone - Preset . 71 Manual Picture Adjustment

- Picture Mode - User Mode . 72

- Picture Mode - Expert Control . 73 Picture Improvement Technology . 74 Advanced Control - Black (Darkness) Level . 75 Advanced Control - Eye Care . 76 Advanced Control - Real Cinema/Film Mode . 77 Picture Reset . 78 Power Indicator . 79 Image Sticking Minimization (ISM) Method . 80 Power Saving Picture Mode . 81 SAFETY INSTRUCTIONS . 3 FEATURE OF THIS TV . 8 PREPARATION Accessories . 9 Front Panel Information . 10 Back Panel Information . 12 Stand Instruction . 14 VESA Wall Mounting . 18 Desktop Pedestal Installation . 19 Swivel Stand . 19 Cable Management . 20 Attaching the TV to a Desk . 22 Securing the TV to the wall to prevent falling when the TV is used on a stand . 23 Antenna or Cable Connection . 24 EXTERNAL EQUIPMENT SETUP HD Receiver Setup . 25 DVD Setup . 28 VCR Setup . 31 Other A/V Source Setup . 34 PC Setup . 35 USB Connection . 42 Audio Out Connection . 43 WATCHING TV / CHANNEL CONTROL Remote Control Functions . 44 Turning On the TV . 46 Channel Selection . 46 Volume Adjustment . 46 Quick Menu . 47 Initial Setting . 48 On-Screen Menus Selection . 50 6 SOUND & LANGUAGE CONTROL APPENDIX Troubleshooting . 112 Maintenance . 114 Product Specifications . 115 Programming the Remote Control . 116 IR Codes . 119 External Control Through RS-232C . 121 Auto Volume Leveler (Auto Volume) . 82 Preset Sound Settings (Sound Mode) . 83 Sound Setting Adjustment - User Mode . 84 Clear Voice . 85 Balance . 86 TV Speakers On/Off Setup . 87 Audio Reset . 88 Stereo/SAP Broadcast Setup . 89 Audio Language . 90 On-Screen Menus Language Selection . 91 Caption Mode

- Analog Broadcasting System Captions . 92

- Digital Broadcasting System Captions . 93

- Caption Option . 94 TIME SETTING Clock Setting

- Auto Clock Setup . 95

- Manual Clock Setup . 96 Auto On/Off Time Setting . 97 Sleep Timer Setting . 98 Auto Shut-off Setting . 99 PARENTAL CONTROL / RATINGS Set Password & Lock System . 100 Channel Blocking . 103 Movie & TV Rating . 104 Downloadable Rating . 109 External Input Blocking . 110 Key lock . 111 7 FEATURE OF THIS TV is a trademark of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. FOR LCD TV I If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal, there is nothing wrong with TV. I Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance. I Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen. On Disposal (Only Hg lamp used LCD TV) The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority. 8 PREPARATION ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. The accessories included may differ from the images below. T V S T B Q. M E N U P O W E R D V D V C R IN P U T M E N U E N T E R R E T U R N V O L F A V A V M O D E Copyright 2007 LGE, All Rights Reserved. Owners Manual CD Manual

* Wipe spots on the exterior only with the polishing cloth.

* Do not wipe roughly when removing stain. Excessive pressure may cause scratch or discoloration. Polishing Cloth

(This feature is not available for all models.) 1 MUTE 4 2 C H P A G E 7 5 3 8 6 0 9 FLASHBK 1.5V 1.5V Remote Control, Batteries OOppttiioonn EExxttrraass Power Cord When using the VGA (D-sub 15 pin cable) PC connection, the user must use shielded signal interface cables with ferrite cores to maintain standards compliance. D-sub 15 pin Cable FFoorr PPllaassmmaa TTVV mmooddeellss x 4 Bolts for stand assembly Cable Holder Cable Management Clip

(Refer to P.14) Protection Cover FFoorr LLCCDD TTVV mmooddeellss

(Only 32/37/42LG30DC)

(Only 32LG30DC) x 4 x 4 or Bolts for stand assembly

(Refer to P.16) Screw for stand fixing

(Refer to P.22) Protection Cover P R E P A R A T O N I 9 PREPARATION FRONT PANEL INFORMATION I Image shown may differ from your TV. I NOTE: If your TV has a protection tape attached, remove the tape. And then wipe the TV with a cloth (If a polishing cloth is included with your TV, use it). P R E P A R A T O N I Plasma TV Models Remote Control Sensor POWER Button Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the TV is switched on. MENU INPUT INPUT ENTER MENU VOL ENTER CH VOL CH INPUT MENU INPUT Button ENTER MENU Button VOL ENTER Button CH VOLUME

(-, +) Buttons CHANNEL

(EE,DD)Buttons 10 LCD TV Models Intelligent Sensor (Except 32/37/42LG30DC) Adjusts picture according to the surrounding conditions Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the set is switched on.

(Can be adjusted using PPoowweerr IInnddiiccaattoorr in the OPTION menu. GG pp..7799) Remote Control Sensor POWER Button CH VOL ENTER MENU INPUT CHANNEL (

Buttons

) VOLUME (+, -) Buttons ENTER Button MENU Button INPUT Button P R E P A R A T O N I 11 PREPARATION BACK PANEL INFORMATION I Image shown may differ from your TV. Plasma TV Models 13 3 1 HDMI/DVI IN RGB(PC) RGB IN 5 4 ANTENNA/

CABLE IN AUDIO

(RGB/DVI) REMOTE CONTROL IN DIGITAL AUDIO OUT OPTICAL COAXIAL 3 2 1 2 1 COMPONENT IN RS-232C IN

(CONTROL & SERVICE) AUDIO OUT O E D V S

I AUDIO VIDEO

( ) MONO VIDEO AUDIO 2 R R 6 7 1 N I V A 8 9

( ) 10 1 9 N I B S U 4 N I I M D H R I O D U A O N O M L

O E D V I AV IN 2 1 2 3 4 5 6 HDMI/DVI IN, HDMI IN Digital Connection. Supports HD video and Digital audio. Doesnt support 480i. Accepts DVI video using an adapter or HDMI to DVI cable (not included). COMPONENT IN Analog Connection. Supports HD. Uses a red, green, and blue cable for video & red and white for audio. RGB (PC) Analog PC Connection. Uses a D-sub 15 pin cable

(VGA cable). AUDIO (RGB/DVI) 1/8 headphone jack for analog PC audio input. REMOTE CONTROL IN PORT For a wired remote control. RS-232C IN (CONTROL & SERVICE) PORT Used by third party devices. ANTENNA/CABLE IN Connect over-the air signals to this jack. Connect cable signals to this jack. 7 8 9 10 11 DIGITAL AUDIO OUT Digital audio output for use with amps and home theater systems. Includes an optical and/or coaxial connection. Note: In standby mode, these ports do not work. AUDIO OUT Analog audio output for use with amps and home theater systems.

( ) AV (Audio/Video) IN Analog composite connection. Supports standard definition video only (480i). S-VIDEO Better quality than standard composition. Supports standard definition video only (480i). USB INPUT Used for viewing photos and listening to MP3s. USB SERVICE ONLY or RS-232C IN (SERVICE ONLY) Used for software updates. 12 RJP INTERFACE 13 Power Cord Socket For operation with AC power. Caution: Never attempt to operate the TV on DC power. P R E P A R A T O N I 12 LCD TV Models 32/37/42LG30DC 1 HDMI/DVI IN 2 1 47/52LG50DC 1 HDMI/DVI IN 2 1 2 1 2 1 13 3 RGB IN RGB(PC) R R 4 7 ANTENNA/

CABLE IN 6 B S U Y L N O E C U V R E S AUDIO

(RGB/DVI) REMOTE CONTROL IN DIGITAL AUDIO OUT OPTICAL RJP INTERFACE RS-232C IN

(CONTROL & SERVICE) R AUDIO OUT S-VIDEO VIDEO MONO

( ) AUDIO 12 5 8 9

( ) R I O D U A O N O M L

O E D V I AV IN 2 VIDEO COMPONENT IN AUDIO 2 11 9 3 RGB IN RGB(PC) AUDIO

(RGB/DVI) REMOTE CONTROL IN DIGITAL AUDIO OUT OPTICAL COAXIAL 7 ANTENNA/

CABLE IN 6 N I B S U 10 RS-232C IN

(CONTROL & SERVICE) AUDIO OUT 1 N I V A S-VIDEO VIDEO MONO

( ) AUDIO

( ) 8 9 9 R I O D U A O N O M L

O E D V I AV IN 2 VIDEO COMPONENT IN AUDIO 2 1 N I V A 5 4 P R E P A R A T O N I 13 PREPARATION STAND INSTRUCTION I Image shown may differ from your TV. Plasma TV models INSTALLATION 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. P R E P A R A T O N I 2 Assemble the TV as shown. 3 Fix the 4 bolts securely using the holes in the back of the TV.

NOTE GG When assembling the desk type stand, make sure the bolt is fully tightened. (If not tightened fully, the TV can tilt forward after the product installa-

tion). Do not over tighten. 14 DETACHMENT 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Loose the bolts from TV. 3 Detach the stand from TV. PROTECTION COVER After removing the stand, install the included pprrootteeccttiioonn ccoovveerr over the hole for the stand. Press the PPRROOTTEECCTTIIOONN CCOOVVEERR into the TV until you hear it click. P R E P A R A T O N I 15 PREPARATION I Image shown may differ from your TV. LCD TV models INSTALLATION (Except 47/52LG50DC) 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. P R E P A R A T O N I 2 Assemble the parts of the SSTTAANNDD BBOODDYY with CCOOVVEERR BBAASSEE of the TV. 3 Assemble the TV as shown. 4 Fix the 4 bolts securely using the holes in the back of the TV. NOTE

GG When assembling the desk type stand, make sure the bolt is fully tightened. (If not tightened fully, the TV can tilt forward after the product installa-

tion). Do not over tighten. 16 SSTTAANNDD BBOODDYY CCOOVVEERR BBAASSEE DETACHMENT 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Loose the bolts from TV. 3 Detach the stand from TV. PROTECTION COVER After removing the stand, install the included pprrootteeccttiioonn ccoovveerr over the hole for the stand. Press the PPRROOTTEECCTTIIOONN CCOOVVEERR into the TV until you hear it click. P R E P A R A T O N I 17 PREPARATION VESA WALL MOUNTING P R E P A R A T O N I Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. We recommend that you use an LG brand wall mount when mounting the TV to a wall. LG recommends that wall mounting be performed by a qualified professional installer. AA BB Model 32LG30DC 37LG30DC 42LG30DC 47LG50DC 52LG50DC 42PG60C VESA

(A * B) 200 * 100 200 * 200 800 * 400 400 * 400 Standard Screw Quantity M4 M6 M6 M6 4 4 4 4 Product LCD TV PLASMA TV

NOTE GG Screw length needed depends on the wall mount used. For further information, refer to the instruc-

tions included with the mount. GG Standard dimensions for wall mount kits are shown in the table. GG When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided. GG Do not use screws longer then the standard dimen-

sion, as they may cause damage to the inside to the TV. GG For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on their specifica-

tions. GG Do not use screws that do not comply with the VESA standard screw specifications. Do not use fasten the screws too strongly, this may damage the TV or cause the TV to a fall, leading to personal injury. LG is not liable for these kinds of accidents. GG LG is not liable for TV damage or personal injury when a non-VESA or non specified wall mount is used or the consumer fails to follow the TV installa-

tion instructions. CAUTION GG Do not install your wall mount kit while your TV is turned on. It may result in personal injury due to electric shock. 18 DESKTOP PEDESTAL INSTALLATION I Image shown may differ from your TV. For proper ventilation, allow a clearance of 4 inches on all four sides from the wall. 4 inches 4 inches 4 inches 4 inches CAUTION GG Ensure adequate ventilation by following the clearance recommendations. GG Do not mount near or above any type of heat source. SWIVEL STAND After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position. P R E P A R A T O N I 19 PREPARATION CABLE MANAGEMENT I Image shown may differ from your TV. Plasma TV Model 1 Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. P R E P A R A T O N I 2 Install the CABLE MANAGEMENT CLIP as shown. If your TV has the CABLE HOLDER, install it as shown and bundle the cables. CABLE HOLDER CABLE MANAGEMENT CLIP How to remove the CABLE MANAGEMENT CLIP GG First, press the cable management. Hold the CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPP with both hands and pull it upward. NOTE

GG Do not hold the CABLE MANAGEMENT CLIP when moving the TV.

- If the TV is dropped, you may be injured or the product may be broken. 20 LCD TV Models 1 Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. 2 Install the CABLE MANAGEMENT CLIP as shown. 3 Put the cables inside the CABLE MANAGE-

MENT CLIP and snap it closed. CABLE MANAGEMENT CLIP P R E P A R A T O N I 21 PREPARATION ATTACHING THE TV TO A DESK (Only 32/42LG30) The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Stand Desk 1-Screw

(provided as parts of the product) WARNING GG To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury. P R E P A R A T O N I 22 SECURING THE TV TO THE WALL TO PREVENT FALLING WHEN THE TV IS USED ON A STAND I You should purchase necessary components to prevent TV from falling off of the stand. I Image shown may differ from your TV. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children dont climb on or hang from the TV. P R E P A R A T O N I I Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture.

* If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.

* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. Secure the wall brackets with the bolts (sold separately) to the wall. Match the height of the bracket that is mounted on the wall to the holes in the product. Ensure the eye-bolts or brackets are tightened securely. I Use a sturdy rope or cord (sold separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product. NOTE

GG Use a platform or cabinet strong enough and large enough to support the size and weight of the TV. GG To use the TV safely make sure that the height of the bracket on the wall and the one on the TV are the same. 23 PREPARATION I To prevent damage do not connect to the power outlet until all connections are made between the devices. ANTENNA OR CABLE CONNECTION 1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connection. For optimum picture quality, adjust the antenna direction if needed. P R E P A R A T O N I R R ANTENNA/

CABLE IN Wall Antenna Socket Outdoor Antenna

(VHF, UHF) 2. Cable Cable TV Wall Jack Multi-family Dwellings/Apartments

(Connect to wall antenna socket) RF Coaxial Wire (75 ohm) Single-family Dwellings /Houses

(Connect to wall jack for outdoor antenna) Copper Wire Be careful not to bend the copper wire when connecting the antenna.

( ) ANTENNA/

CABLE IN RF Coaxial Wire (75 ohm) I To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly. I If the antenna needs to be split for two TVs, install a 2-Way Signal Splitter. I If the antenna is not installed properly, contact your dealer for assistance.

( ) 24 EXTERNAL EQUIPMENT SETUP I To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. I Image shown may differ from your TV. HD RECEIVER SETUP This TV can receive digital over-the-air/digital cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device. Component Connection 1. How to connect 1 Connect the video outputs (Y, PB, PR) of the digital set-

top box to the CCOOMMPPOONNEENNTT IINN VVIIDDEEOO 11 jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). 2 Connect the audio output of the digital set-top box to the CCOOMMPPOONNEENNTT IINN AAUUDDIIOO 11 jacks on the TV. 2. How to use Y PB PR L R 1 2 RGB IN RGB(PC) AUDIO

(RGB/DVI) REMOTE CONTROL IN I Turn on the digital set-top box.

(Refer to the owners manual for the digital set-top box. operation) I Select the CCoommppoonneenntt 11 input source on the TV using the IINNPPUUTT button on the remote control. I If connected to CCOOMMPPOONNEENNTT IINN22 input, select the CCoommppoonneenntt 22 input source on the TV. DVI IN 2 1 Y PB PR L R VIDEO COMPONENT IN AUDIO

(CO 1 N I V A Supported Resolutions Signal 480i 480p 720p 1080i 1080p Component HDMI Yes Yes Yes Yes Yes No Yes Yes Yes Yes Y, CB/PB, CR/PR Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 720x480i 720x480p 1280x720p 1920x1080i 1920x1080p 15.73 15.73 31.47 31.50 44.96 45.00 33.72 33.75 26.97 27.00 33.71 33.75 67.432 67.50 59.94 60.00 59.94 60.00 59.94 60.00 59.94 60.00 23.976 24.00 29.97 30.00 59.94 60.00 E X T E R N A L E Q U I P M E N T S E T U P 25 EXTERNAL EQUIPMENT SETUP HDMI Connection 1. How to connect 1 LCD TV: Connect the digital set-top box to HHDDMMII//DDVVII IINN11 or 22 jack on the TV. Plasma TV: Connect the digital set-top box to HHDDMMII//DDVVII IINN11, 22, 33, or 44 jack on the TV. 2 No separate audio connection is necessary. HDMI supports both audio and video. LCD TV RGB IN RGB(PC) A

(RG 2 1 Y PB PR VIDEO COMPONENT HDMI/DVI IN 2 1 2. How to use I Turn on the digital set-top box.

(Refer to the owners manual for the digital set-top box.) I LCD TV: Select the HHDDMMII11 or HHDDMMII22 input source on the TV using the IINNPPUUTT button on the remote control. Plasma TV: Select the HHDDMMII11, HHDDMMII22, HHDDMMII33, or HHDDMMII44 input source on the TV using the IINNPPUUTT button on the remote control. 1 HDMI-DTV OUTPUT HDMI-DTV Plasma TV Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) HDMI/DVI IN RGB IN RGB(PC) 720x480p 1280x720p 1920x1080i 1920x1080p 31.47 31.50 44.96 45.00 33.72 33.75 26.97 27.00 33.71 33.75 67.432 67.50 59.94 60.00 59.94 60.00 59.94 60.00 23.976 24.00 29.97 30.00 59.939 60.00 Y PB PR VIDEO COMPON 3 2 1 1 HDMI-DTV OUTPUT E X T E R N A L E Q U I P M E N T S E T U P 26 DVI to HDMI Connection 1. How to connect 1 LCD TV: Connect the DVI output of the digital set-top box to the HHDDMMII//DDVVII IINN 11 or 22 jack on the TV. Plasma TV: Connect the DVI output of the digital set-

top box to the HHDDMMII//DDVVII IINN 11, 22, or 33 jack on the TV. 2 Connect the PC audio output to the AA UU DD II OO

((RRGGBB//DDVVII)) jack on the TV. 2. How to use I Turn on the digital set-top box. (Refer to the owners manu-

al for the digital set-top box.) I LCD TV: Select the HHDDMMII11 or HHDDMMII22 input source on the TV using the IINNPPUUTT button on the remote control. Plasma TV: Select the HHDDMMII11, HHDDMMII22, or HHDDMMII33 input source on the TV using the IINNPPUUTT button on the remote control.

NOTE GG A DVI to HDMI cable or adapter is required for this con-

nection. DVI doesn't support audio, so a separate audio connection is necessary. LCD TV HDMI/DVI IN 2 1 RGB IN RGB(PC) AUDIO

(RGB/DVI) REMO CONTRO 2 1 1 Y PB PR L R VIDEO COMPONENT IN AUDIO 2 Plasma TV HDMI/DVI IN 3 2 1 DVI-DTV OUTPUT L R RGB IN RGB(PC) AUDIO

(RGB/DVI) REMOTE CONTROL IN Y PB PR 2 1 L R VIDEO COMPONENT IN AUDIO

(CO 1 N I V A 1 2 E X T E R N A L E Q U I P M E N T S E T U P

( ) DVI-DTV OUTPUT L R 27 EXTERNAL EQUIPMENT SETUP DVD SETUP Component Connection 1. How to connect 1 Connect the video outputs (Y, PB, PR) of the DVD to the CCOOMMPPOONNEENNTT IINN VVIIDDEEOO11 jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). 2 Connect the audio outputs of the DVD to the CCOOMMPPOONNEENNTT IINN AAUUDDIIOO11 jacks on the TV. 2. How to use DMI/DVI IN I Turn on the DVD player, insert a DVD. I Select the CCoommppoonneenntt 11 input source on the TV using the IINNPPUUTT button on the remote control. I If connected to CCOOMMPPOONNEENNTT IINN 22 input, select the CCoommppoonneenntt 22 input source on the TV. I Refer to the DVD player's manual for operating instructions. Y PB PR L R 1 2 RGB IN RGB(PC) AUDIO

(RGB/DVI) REMOTE CONTROL 2 1 Y PB PR L R VIDEO COMPONENT IN AUDIO

(C 1 N I V A Component Input ports To get better picture quality, connect a DVD player to the component input ports as shown below. Component ports on the TV Video output ports on DVD player Y Y Y Y Y PB PB B-Y Cb Pb PR PR R-Y Cr Pr E X T E R N A L E Q U I P M E N T S E T U P 28 S-Video Connection 1. How to connect S-VIDEO AUDIO L R 1 2 Connect the S-VIDEO output of the DVD to the SS --VVIIDDEEOO input on the TV. Connect the audio outputs of the DVD to the AAUUDDIIOO input jacks on the TV. ANTENNA/

CABLE IN 2. How to use I Turn on the DVD player, insert a DVD. I Select the AA VV 11 input source on the TV using the IINNPPUUTT button on the remote control. I Refer to the DVD player's manual for operating instructions. AUDIO GB/DVI) REMOTE CONTROL IN 2 1 DIGITAL AUDIO OUT OPTICAL COAXIAL RS-232C IN

(CONTROL & SERVICE) AUDIO OUT L R AUDIO T IN 1 N I V A S-VIDEO VIDEO L

(MONO) AUDIO R E X T E R N A L E Q U I P M E N T S E T U P 29 EXTERNAL EQUIPMENT SETUP HDMI Connection 1. How to connect 1 LCD TV: Connect the HDMI output of the DVD to the HHDDMMII//DDVVII IINN11 or 22 jack on the TV. Plasma TV: Connect the HDMI output of the DVD to the HHDDMMII//DDVVII IINN11, 22, 33, or 44 jack on the TV. 2 No separate audio connection is necessary. HDMI supports both audio and video. RGB(PC) AUDI

(RGB/D 2 1 Y PB PR L VIDEO COMPONENT IN A LCD TV HDMI/DVI IN 2 1 1 2. How to use I LCD TV: Select the HHDDMMII11 or HHDDMMII22 input source on the TV using the IINNPPUUTT button on the remote control. Plasma TV: Select the HHDDMMII11, HHDDMMII22, HHDDMMII33, or HHDDMMII44 input source on the TV using the IINNPPUUTT button on the remote control. I Refer to the DVD player's manual for operating instructions. HDMI-DVD OUTPUT Plasma TV HDMI/DVI IN RGB IN RGB(PC) 3 2 1 Y PB PR

(R 2 1 VIDEO COMPONENT 1 HDMI-DVD OUTPUT E X T E R N A L E Q U I P M E N T S E T U P 30 VCR SETUP I To avoid picture noise (interference), leave an adequate distance between the VCR and TV. I Use the ISM feature in the Option menu to avoid having a fixed image remain on the screen for a long period of time (Plasma TV models only). If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all TVs and is not covered by warranty. Antenna Connection 1. How to connect 1 Connect the RF antenna out socket of the VCR to the AANNTTEENNNNAA//CCAABBLLEE IINN sock-

et on the TV. ANTENNA/

CABLE IN UDIO OUT COAXIAL 1 2 Connect the antenna cable to the RF antenna in socket of the VCR. AUDIO OUT E) ANT IN OUTPUT SWITCH ANT OUT S-VIDEO VIDEO L R 2. How to use EO L

(MONO) AUDIO R I Set VCR output switch to 3 or 4 and then tune TV to the same channel number. I Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) Wall Jack 2 Antenna E X T E R N A L E Q U I P M E N T S E T U P 31 EXTERNAL EQUIPMENT SETUP Composite (RCA) Connection 1. How to connect 1 Connect the AAUUDDIIOO/VVIIDDEEOO jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left

= white, and Audio Right = red) 2. How to use I Insert a video tape into the VCR and press PLAY on the VCR.

(Refer to the VCR owners manual.) I Select the AA VV 11 input source on the TV using the IINNPPUUTT button on the remote control. I If connected to AAVV IINN22, select AAVV22 input source on the TV. ANT IN S-VIDEO VIDEO L R ANT OUT OUTPUT SWITCH 1 ANTENNA/

CABLE IN AUDIO

(RGB/DVI) REMOTE CONTROL IN DIGITAL AUDIO OUT OPTICAL COAXIAL RS-232C IN

(CONTROL & SERVICE) AUDIO OUT NOTE

GG If you have a mono VCR, connect the audio cable from the VCR to the AAUUDDIIOO LL//MMOONNOO jack of the TV. L R AUDIO NT IN 1 N I V A S-VIDEO VIDEO L

(MONO) AUDIO R E X T E R N A L E Q U I P M E N T S E T U P 32 Connect the S-VIDEO output of the VCR to the SS --VVIIDDEEOO input on the TV. ANT IN S-VIDEO VIDEO L R S-Video Connection 1. How to connect 1 2 Connect the audio outputs of the VCR to the AAUUDDIIOO input jacks on the TV. 2. How to use I Insert a video tape into the VCR and press PLAY on the VCR.

(Refer to the VCR owners manual.) I Select the AA VV 11 input source on the TV using the IINNPPUUTT button on the remote control.

NOTE GG S-Video provides better quality than composite. Use it when available. CAUTION GG Do not connect to both Video and S-Video at the same time. In the event that you connect both Video and the S-Video cables, only the S-Video will work. ANT OUT OUTPUT SWITCH ANTENNA CABLE IN AUDIO

(RGB/DVI) REMOTE CONTROL IN DIGITAL AUDIO OUT 2 1 OPTICAL COAXIAL RS-232C IN

(CONTROL & SERVICE) AUDIO OUT R L R AUDIO ENT IN 1 N I V A S-VIDEO VIDEO L

(MONO) AUDIO R E X T E R N A L E Q U I P M E N T S E T U P 33 Camcorder Video Game Set VIDEO L R 1 N I B S U R I O D U A O N O M L

O E D V I EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP 1. How to connect 1 Connect the AAUUDDIIOO/VVIIDDEEOO jacks between TV and external equipment. Match the jack colors.

(Video = yellow, Audio Left = white, and Audio Right = red) 2. How to use I Select the AA VV 22 input source on the TV using the IINNPPUUTT button on the remote control. I If connected to AAVV IINN11 input, select the AA VV 11 input source on the TV. I Operate the corresponding external equipment. E X T E R N A L E Q U I P M E N T S E T U P 34 PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. VGA (D-Sub 15 pin) Connection 1. How to connect 1 2 Connect the VGA output of the PC to the RR GG BB

((PP CC)) jack on the TV. Connect the PC audio output to the AAUUDDIIOO

((RRGGBB//DDVVII)) jack on the TV. 2. How to use I Turn on the PC and the TV. I Select the RRGGBB--PPCC input source on the TV using the IINNPPUUTT button on the remote control. MI/DVI IN RGB IN RGB(PC) AUDIO

(RGB/DVI) REMOTE CONTROL I

(CO 2 1 Y PB PR L R VIDEO COMPONENT IN AUDIO 1 2 RGB OUTPUT AUDIO E X T E R N A L E Q U I P M E N T S E T U P 35 EXTERNAL EQUIPMENT SETUP DVI to HDMI Connection 1. How to connect 1 2 LCD TV: Connect the DVI output of the PC to the HHDDMMII//DDVVII IINN 11 or 22 jack on the TV. Plasma TV: Connect the DVI output of the PC to the HHDDMMII//DDVVII IINN 11, 22, or 33 jack on the TV. Connect the PC audio output to the AA UU DD II OO

((RRGGBB//DDVVII)) jack on the TV. 2. How to use I Turn on the PC and the TV. I LCD TV: Select the HHDDMMII11 or HHDDMMII22 input source on the TV using the IINNPPUUTT button on the remote control. Plasma TV: Select the HHDDMMII11, HHDDMMII22, or HHDDMMII33 input source on the TV using the IINNPPUUTT button on the remote control. LCD TV RGB IN RGB(PC) AUDIO

(RGB/DVI) RE CON Y PB PR L R VIDEO COMPONENT IN AUDIO 2 HDMI/DVI IN 2 1 2 1 1 Plasma TV HDMI/DVI IN 3 2 1 DVI-PC OUTPUT AUDIO RGB IN RGB(PC) AUDIO

(RGB/DVI) REMOT CONTRO Y PB PR 2 1 L R VIDEO COMPONENT IN AUDIO 1 2 DVI-PC OUTPUT AUDIO E X T E R N A L E Q U I P M E N T S E T U P 36

NOTES GG 32/37/42LG30DC, 42PG60C: To get the the best picture quality, adjust the PC graphics card to 1360x768. GG 47/52LG50DC: To get the the best picture quali-

ty, adjust the PC graphics card to 1920x1080. on the PICTURE menu until the picture is clear. GG Avoid keeping a fixed image on the screen for a long period of time. The fixed image could become permanently imprinted on the screen. GG The synchronization input form for Horizontal and GG Depending on the graphics card, DOS mode may Vertical frequencies is separate. not work if a HDMI to DVI Cable is in use. GG In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or bright-

ness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast GG Depending on the graphics card, some resolution settings may not allow the image to be positioned on the screen properly. GG If there are overscan in HDMI-PC 1920x1080, change aspect ratio to JJuusstt ssccaann. Supported Display Specifications (RGB-PC, HDMI-PC) For 32/37/42LG30DC For 47/52LG50DC, Plasma TV E X T E R N A L E Q U I P M E N T S E T U P Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 640x350 31.469 720x400 640x480 800x600 1024x768 1280x768 1360x768 1366x768 31.469 31.469 37.879 48.363 47.776 47.720 47.130 70.08 70.08 59.94 60.31 60.00 59.87 59.799 59.65

* Only RGB-PC mode Resolution 640x350 720x400 640x480 800x600 1024x768 1280x768 1280x1024 1360x768 1600x1200 Horizontal Vertical Frequency(KHz) Frequency(Hz) 31.468 31.469 31.469 37.500 37.861 35.156 37.879 46.875 48.077 48.363 56.476 60.023 47.776 60.289 63.981 79.976 47.712 75.00 66.587 70.09 70.08 59.94 75.00 72.80 56.25 60.31 75.00 72.18 60.00 70.06 75.02 59.87 74.893 60.02 75.025 60.015 60.00 59.934 60.00 LCD TV RGB-PC 1920x1080 HDMI-PC 67.5 Plasma TV 1920x1080 66.587 59.934

* Only RGB-PC mode 37 EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Selecting Resolution You can choose the resolution in RGB-PC mode. The PPoossiittiioonn, PPhhaassee, and SSiizzee can also be adjusted. PICTURE Move Enter SCREEN Move MENU Prev. E 50 60 60 0 Brightness Sharpness Color Tint Advanced Control Reset R G Screen (RGB-PC) TruMotion Demo 1024 x 768 1280 x 768 1360 x 768 1366 x 768 Resolution G Auto config. Position Size Phase Reset Only for 32/37/42LG30DC Select PPIICCTTUURREE. Select SSccrreeeenn ((RRGGBB--PPCC)). Select RReessoolluuttiioonn. Select the desired resolution. 1 MENU 2 3 4 5 ENTER ENTER ENTER ENTER E X T E R N A L E Q U I P M E N T S E T U P 38 Auto Configure Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, try using the manual settings or a different resolution or refresh rate on the PC. PICTURE Move Enter SCREEN Move MENU Prev. E 50 60 60 0 Brightness Sharpness Color Tint Advanced Control Reset R G Screen (RGB-PC) TruMotion Demo Resolution Auto config. G Position Size Phase Reset To Set Yes No 1 MENU Select PPIICCTTUURREE. 2 3 4 5 ENTER ENTER Select SSccrreeeenn ((RRGGBB--PPCC)). Select AAuuttoo ccoonnffiigg... ENTER Select YY ee ss. ENTER Start Auto Configuration. If the position of the image is still not correct, try Auto adjustment again. If picture needs to be adjusted again after Auto adjustment in RGB-PC, you can adjust the PP oo ss ii tt ii oo nn, SS ii zz ee or PPhhaassee. E X T E R N A L E Q U I P M E N T S E T U P 39 EXTERNAL EQUIPMENT SETUP Adjustment for screen Position, Size, and Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This feature operates only in RGB-PC mode. PICTURE Move Enter E 50 60 60 0 Brightness Sharpness Color Tint Advanced Control Reset R G Screen (RGB-PC) TruMotion Demo SCREEN Move MENU Prev. Resolution Auto config. Position G Size Phase Reset F D E G 1 MENU 2 3 4 5 ENTER ENTER ENTER ENTER Select PPIICCTTUURREE. Select SSccrreeeenn ((RRGGBB--PPCC)). Select PPoossiittiioonn, SS ii zz ee, or PPhhaassee. Make appropriate adjustments. I PPoossiittiioonn: This function is to adjust pic-

ture to left/right and up/down as you prefer. I SS ii zz ee: This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change. I PP hh aa ss ee: This function allows you to remove any horizontal noise and clear or sharpen the image of characters. E X T E R N A L E Q U I P M E N T S E T U P 40 Screen Reset (Reset to original factory values) Returns PPoossiittiioonn, SS ii zz ee, and PPhhaassee to the default factory settings. This feature operates only in RGB-PC mode. PICTURE Move Enter E 50 60 60 0 Brightness Sharpness Color Tint Advanced Control Reset R G Screen (RGB-PC) TruMotion Demo SCREEN Move MENU Prev. Resolution Auto config. Position Size Phase Reset G To Set Yes No Select PPIICCTTUURREE. Select SSccrreeeenn ((RRGGBB--PPCC)). Select RReesseett. Select YY ee ss. 1 MENU 2 3 4 5 ENTER ENTER ENTER ENTER E X T E R N A L E Q U I P M E N T S E T U P 41 EXTERNAL EQUIPMENT SETUP USB CONNECTION (Except 32/37/42LG30DC) or 1 i.e) N I B S U R I O D U A O N O M L

O E D V I AV IN 2 1. How to connect 1 Connect the USB device to the UUSSBB II NN jack on the side of TV. 2. How to use I After connecting the UUSSBB II NN jack, you use the USB func-

tion. (GG pp..6600) E X T E R N A L E Q U I P M E N T S E T U P 42 AUDIO OUT CONNECTION Send the TVs audio to external audio equipment via the Audio Output port. Analog 1. How to connect 1 2 Connect audio outputs to the TVs AAUUDDIIOO OOUUTT jacks. Set the TV Speaker option - Off in the AUDIO menu.

(GG pp..8877). See the external audio equipment instruction manual for operation. Digital 1. How to connect RS-232C IN

(CONTROL & SERVICE) AUDIO OUT R AUDIO S-VIDEO VIDEO L

(MONO) AUDIO R 1 L R AUDIO 1 N I V A 1 2 3 Connect one end of the optical or coaxial cable to the TVs OOPPTTIICCAALL or CCOOAAXXIIAALL (Except 32/37/42LG30DC) port of DDIIGGIITTAALL AAUUDDIIOO OOUUTT. Connect the other end of the optical or coaxial cable to the digital audio input on the audio equipment. ANTENNA/

CABLE IN UDIO B/DVI) REMOTE CONTROL IN DIGITAL AUDIO OUT OPTICAL COAXIAL Set the TV Speaker option - Off in the AUDIO menu. (GG pp..8877). See the external audio equipment instruction manu-

al for operation. RS-232C IN 1

(CONTROL & SERVICE) AUDIO OUT L R AUDIO N S-VIDEO VIDEO L

(MONO) AUDIO R 1 N I V A 2

NOTE GG When connecting with external audio equipments, such as amplifiers or speakers, you can turn the TV speakers off in the menu. (GG pp .. 88 77) CAUTION G Do not look into the optical output port. Looking at the laser beam may damage your vision. GG Block the SPDIF out (optical/coaxial) about the contents with ACP(Audio Copy Protection) function. E X T E R N A L E Q U I P M E N T S E T U P 43 WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. TV/STB/DVD/VCR Select the remote operating mode: TV, STB, DVD, or VCR. POWER Turns your TV or any other programmed equipment on or off, depending on the mode. Q.MENU Select the desired quick menu source. GG pp..4477 TV POWER DVD STB Q. MENU MENU VCR INPUT MENU Displays the main menu. Clear all on-screen displays and return to TV viewing from any menu. ENTER INPUT External input modes rotate in regular sequence. VOLUME UP

/DOWN Increase/decrease the sound level. FAV Scroll through the programmed Favorite channels. GG pp..4477 MUTE Switch the sound on or off. GG pp..4466 CHANNEL UP/DOWN PAGE UP/DOWN NUMBER button

(DASH) Select available channels. Move from one full set of screen information to the next one. Used to enter a program number for multiple program channels such as 2-1, 2-2, etc. FLASHBK Tune to the last channel viewed. RETURN AV MODE VOL 1 4 7 FAV MUTE 2 5 8 0 CH P A G E 3 6 9 FLASHBK VCR/DVD, USB, SIMPLINK Control buttons Control video cassette recorders or DVD players. Control USB menu (PHOTO LIST and MUSIC LIST.) Control the SIMPLINK compatible devices. W A T C H I N G T V

C H A N N E L C O N T R O L 44 THUMBSTICK

(Up/Down/Left Right/ENTER) Navigate the on-screen menus and adjust the system settings to your preference. RETURN Allows the user to move return one step in an interactive application or other user interaction function. SIMPLINK See a list of AV devices connected to TV. When you toggle this button, the SIMPLINK menu appears at the screen. GG pp..5588--5599 AV MODE It helps you select and set images and sounds. GG pp..5577 Installing Batteries I Open the battery compartment cover on the back side and install the batteries matching correct polarity (+with +,-with -). I Install two 1.5V AAA batteries. Dont mix old or used batteries with new ones. I Close cover. W A T C H I N G T V

C H A N N E L C O N T R O L 45 WATCHING TV / CHANNEL CONTROL TURNING ON THE TV 1 2 3 First, connect power cord correctly. At this moment, the TV switches to standby mode. I In standby mode to turn TV on, press the button on the TV or press the PPOOWWEERR, IINNPPUUTT, CCHH((

((00~99)) button on the remote control. or

, IINNPPUUTT, CCHH ((DDEE or

)), NNuummbbeerr Select the viewing source by using the IINNPPUUTT button on the remote control. I This TV is programmed to remember which power state it was last set to, even if the power cord is out. When finished using the TV, press the PPOOWWEERR button on the remote control. The TV reverts to standby mode.

NOTE GG If you intend to be away on vacation, disconnect the power plug from the wall power outlet. CHANNEL SELECTION 1 Press the CCHH ((

or

)) or NNUUMMBBEERR buttons to select a channel number. VOLUME ADJUSTMENT Adjust the volume to suit your personal preference. 1 2 3 Press the VVOOLL ((++ or --)) button to adjust the volume. If you want to switch the sound off, press the MMUUTTEE button. You can cancel the Mute function by pressing the MMUUTTEE or VVOOLL ((++ or --)) button. W A T C H I N G T V

C H A N N E L C O N T R O L 46 QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. I AAssppeecctt RRaattiioo: Selects your desired picture format. I PPoowweerr SSaavviinngg (Plasma TV Only): Adjusts screen brightness to reduce the power consumption of the TV. I BBaacckklliigghhtt (LCD TV Only): Adjust the brightness of LCD panel to control the brightness of the screen. I CClleeaarr VVooiiccee: By differentiating the human sound range from others, it helps make human voices sound better. I PPiiccttuurree MMooddee: Selects the factory preset picture depend on the viewing environment. I SSoouunndd MMooddee: Selects the factory preset sound for type of program. I CCaappttiioonn: Select on or off. I MMuullttii AAuuddiioo: Changes the audio language (Digital signal). SSAAPP: Selects MTS sound (Analog signal). I SSlleeeepp TTiimmeerr: Select the amount of time before your TV turns off automatically. I DDeell//AAdddd//FFaavv: Select channel you want to add/delete or add the channel to the Favorite List. I UUSSBB EEjjeecctt: Select USB Eject in order to eject USB device. Plasma TV Q.Menu LCD TV Q.Menu Aspect Ratio FF 16:9 GG Aspect Ratio FF 16:9 GG Power Saving Clear Voice Picture Mode Sound Mode Caption Multi Audio Sleep Timer Del/Add/Fav USB Eject CH 3 Off Vivid Standard Off English Off Add Eject Backlight Clear Voice Picture Mode Sound Mode Caption Multi Audio Sleep Timer Del/Add/Fav USB Eject CH 3 Off Vivid Standard Off English Off Add Eject Close Close Except 32/37/42LG30DC 1Q. MENU 2 3Q. MENU Display each menu. Make appropriate adjustments. Return to TV viewing. W A T C H I N G T V

C H A N N E L C O N T R O L 47 WATCHING TV / CHANNEL CONTROL INITIAL SETTING This Function guides the user to easily set the essential items for viewing the TV for the first time when pur-

chasing the TV. If will be displayed on the screen when turning the TV on for the first time. It can also be acti-

vated from the user menus. I Default selection is HH oo mm ee. We recommend setting the TV to HH oo mm ee mode for the best picture in your home environment. I IInn--ssttoorree Mode is only intended for use in retail environments. Customers can adjust the PPiiccttuurree menu -

PPiiccttuurree mmooddee manually while inspecting the TV, but the TV will automatically return to preset in-store mode after 5 minutes. Step1. Mode setting Step1. Mode Setting

Selecting the environment. Choose the setting mode you want. In Store Home Enter RETURN Exit Step2. Time setting Step2. Time Setting Current Time Setting FF Auto GG Year Month Date Hour Minute Time Zone Daylight Saving 2007 11 15 5 PM 52 Eastern Off Enter RETURN Exit Select HH oo mm ee Mode. Select AAuuttoo or MMaannuuaall. Select desired time option. 1 2 1 2 3 ENTER ENTER W A T C H I N G T V

C H A N N E L C O N T R O L 48 Step3. Option setting Step3. Option Setting 1. OSD Language Setting FF English GG 2. Audio Language Setting French Enter RETURN Exit Step4. Auto Tuning Step4. Auto Tuning Auto Tuning can change channel map. Do you want to start Auto Tuning?

Enter Enter RETURN Exit Select OOSSDD LLaanngguuaaggee SSeettttiinngg or AAuuddiioo LLaanngguuaaggee SSeettttiinngg. Select your desired language. 1 2 3 ENTER 1 ENTER Start AAuuttoo TTuunniinngg.

NOTE I You can also adjust IInniittiiaall SSeettttiinngg in the OOPPTTIIOONN menu. W A T C H I N G T V

C H A N N E L C O N T R O L 49 WATCHING TV / CHANNEL CONTROL ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. All models (Except 32/37/42LG30DC) CHANNEL Move Enter PICTURE Move Enter Auto Tuning Manual Tuning Channel Edit Aspect Ratio : 16:9 Picture Mode : Standard Backlight Contrast Brightness Sharpness Color Tint E 80 90 50 60 60 0 R G OPTION Move Enter Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID E

: English

: On

: Off

: Off

: Normal

: Level 0

: 1 CHANNEL PICTURE AUDIO TIME OPTION LOCK INPUT USB AUDIO Auto Volume Clear Voice Balance Sound Mode

: Off

: On Move Enter 0 L R

: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 TIME Move Enter

: Feb/21/2008 2:10 AM Clock

: Off Off Time On Time

: Off Sleep Timer : Off Auto Sleep : Off LOCK Move Enter INPUT Move Enter USB Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block For USA For Canada Antenna Cable AV1 AV2 Component1 Component2 RGB-PC HDMI1 E PHOTO LIST MUSIC LIST 1 MENU Display each menu. 2 3 ENTER Select a menu item. ENTER Enter to the pop up menu. 4 MENU Return to TV viewing.

NOTE GG IISSMM MMeetthhoodd, PPoowweerr SSaavviinngg: Only PPllaassmmaa TTVV. GG BBaacckklliigghhtt,, PPoowweerr IInnddiiccaattoorr: Only LLCCDD TTVV. W A T C H I N G T V

C H A N N E L C O N T R O L 50 Only for 32/37/42LG30DC CHANNEL Move Enter PICTURE Move Enter AUDIO Auto Volume Clear Voice Balance Sound Mode

: Off

: On Move Enter 0 L R

: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 Aspect Ratio : 16:9 Picture Mode : Standard Backlight Contrast Brightness Sharpness Color Tint E 80 90 50 60 60 0 R G CHANNEL PICTURE AUDIO TIME OPTION LOCK LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block For USA For Canada Auto Tuning Manual Tuning Channel Edit TIME Move Enter

: Feb/21/2008 2:10 AM Clock

: Off Off Time On Time

: Off Sleep Timer : Off Auto Sleep : Off OPTION Language Input Label SIMPLINK Key Lock Caption Set ID Power Indicator Initial Setting Move Enter

: English

: On

: Off

: Off

: 1

: Home 1 MENU Display each menu. 2 3 ENTER Select a menu item. ENTER Enter to the pop up menu. 4 MENU Return to TV viewing. W A T C H I N G T V

C H A N N E L C O N T R O L 51 WATCHING TV / CHANNEL CONTROL CHANNEL SETUP Auto Scan (Auto Tuning) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run Auto Tuning again after any Antenna/Cable connection changes. Move Enter CHANNEL Auto Tuning Manual Tuning Channel Edit Move Enter CHANNEL Auto Tuning Manual Tuning Channel Edit Press Yes button to begin auto tuning. Yes No 1 MENU Select CCHHAANNNNEELL. 2 3 4 ENTER ENTER Select AAuuttoo TTuunniinngg. Select YY ee ss. ENTER Run AAuuttoo ttuunniinngg. 5RETURN MENU Return to the previous menu. Return to TV viewing. I A password is required to gain access to Auto Tuning menu if the Lock System is turned on. W A T C H I N G T V

C H A N N E L C O N T R O L 52 Add/Delete Channel (Manual Tuning) If selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality of the signal being received. Move Enter CHANNEL Auto Tuning Manual Tuning Channel Edit CHANNEL Auto Tuning Manual Tuning Channel Edit Move Enter FF DTV GG Select channel type and RF-channel number. Channel DTV 2-1 2 Bad Normal Good Delete Close 1 MENU ENTER ENTER 2 3 4 5 6RETURN MENU Select CCHHAANNNNEELL. Select MMaannuuaall TTuunniinngg. Select DD TT VV, TT VV, CCAADDTTVV, or CC AA TT VV. Select channel you want to add or delete. ENTER Select AA dd dd or DDeelleettee. Return to the previous menu. Return to TV viewing. I A password is required to gain access to Manual Tuning menu if the Lock System is turned on. W A T C H I N G T V

C H A N N E L C O N T R O L 53 WATCHING TV / CHANNEL CONTROL CHANNEL SETUP Channel Editing A custom list can be created by toggling each channel on or off with ENTER button. The channels in the Custom List are displayed in black and the channels deleted from the Custom List are displayed in gray. Once a channel is highlighted you can add or delete the channel by referring to the small window at the top-

right corner of the screen. Add/Delete Move CH Move Page MENU Previous RETURN Exit W A T C H I N G T V

C H A N N E L C O N T R O L 54 Move Enter CHANNEL Auto Tuning Manual Tuning Channel Edit 1 MENU Select CCHHAANNNNEELL. 2 3 4 ENTER Select CChhaannnneell EEddiitt. ENTER ENTER Select a channel. Select channel you want to add or delete. 5 MENU Return to the previous menu. RETURN Return to TV viewing. INPUT LIST Only these input signals which are connected to a TV can be activated and selected. Antenna Cable AV1 AV2 Component1 1 INPUT ENTER Select the desired input source. I You can also select the desired input source in the IINNPPUUTT menu

(Except 32/37/42LG30DC). LCD TV Plasma TV ie) Antenna Cable AV1 AV2 HDMI2 HDMI1 RGB-PC Component2 Component1 Antenna Cable AV1 AV2 Component1 Component2 HDMI4 HDMI3 HDMI2 HDMI1 RGB-PC Disconnected inputs are inactive (grayed out) Antenna Cable AV1 AV2 Component1 Q.MENU Input Label RETURN Exit Select a desired input source (except AAnntteennnnaa or CCaabbllee). Then, you can select your desired Input Label with using Q. MENU button. GG pp..6600 I AAnntteennnnaa: Select it to watch over-the-air broadcasts. I CCaabbllee: Select it to watch cable and digital cable. I AA VV: Select them to watch a VCR or other external equipment. I CCoommppoonneenntt: Select them to watch DVD or a Digital set-top box. I RRGGBB--PPCC: Select it to view PC input. I HH DD MM II: Select them to watch high definition devices. W A T C H I N G T V

C H A N N E L C O N T R O L 55 WATCHING TV / CHANNEL CONTROL INPUT LABEL You can set a label for each input source when it's not in use. FF GG OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Move Enter

: English

: On

: Off

: Off

: Normal

: Level 0

: 1 AV1 AV2 Component1 Component2 RGB-PC HDMI1 HDMI2 EE Close LCD TV FF GG AV1 AV2 Component1 Component2 RGB-PC HDMI1 HDMI2 HDMI3 HDMI4 Close Plasma TV With using OPTION menu With using INPUT button 1 MENU ENTER ENTER 2 3 4 5RETURN MENU Select OOPPTTIIOONN. Select IInnppuutt LLaabbeell. Select the source. Select the source. Select the label. Return to the previous menu. 1 INPUT 2Q. MENU 3RETURN MENU Select the label. Return to TV viewing. Return to the previous menu. Return to TV viewing. I When new external device is connected, this popup menu is displayed automatically. If selecting YY ee ss, you can select input source that you want to appreciate. I But, when selecting SSIIMMPPLLIINNKK - OO nn, popup menu for HDMI input will not be displayed.

New external device is connected. Do you want to enjoy this?

Yes No

Select input source that you want to appreciate. AV1 AV2 Component1 W A T C H I N G T V

C H A N N E L C O N T R O L 56 AV MODE You can select the optimal images and sounds. Off Cinema Game Sport Press the AAVV MMOODDEE button repeatedly to select the desired source. 1AV MODE 2 ENTER I If you select CCiinneemmaa in AV mode, CCiinneemmaa will be selected both for PIC-

TURE menu - Picture Mode and AUDIO menu - Sound Mode respectively. I If you select OO ff ff in AV mode, the PPiiccttuurree MMooddee and SSoouunndd MMooddee return to previous selected value. W A T C H I N G T V

C H A N N E L C O N T R O L 57 WATCHING TV / CHANNEL CONTROL This function operates only with devices with the The TV might not function properly when using it with other products with HDMI-CEC function. This allows you to control and play other AV devices connected with HDMI cable without additional cables and settings. To start using SIMPLINK, turn it on in the user menus. logo. OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID E Move Enter

: English

: On

: Off

: Off

: Normal

: Level 0

: 1 OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Move Enter

: English Off On

: On

: Off

: Off

: Normal

: Level 0

: 1 E 1 MENU 2 3 ENTER ENTER 4RETURN MENU Select OOPPTTIIOONN. Select SSIIMMPPLLIINNKK. Select OO nn or OO ff ff. Return to the previous menu. Return to TV viewing.

NOTE GG Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of the SIMPLINK device with the HDMI cable. GG When you switch the Input source with the INPUT button on the remote control, the SIMPLINK device will stop. GG When you select a device with home theater functionality, the sound output automatically switches to the home theater speakers. GG If a connected SIMPLINK home theater system doesn't play the audio from the TV, connect the DIGITAL AUDIO OUT terminal on the back of the TV to the DIGITAL AUDIO IN terminal on the back of the SIM-

PLINK device with an OPTICAL cable. W A T C H I N G T V

C H A N N E L C O N T R O L 58 SIMPLINK Functions I DDiirreecctt PPllaayy:: After connecting AV devices to the TV, you can directly control the devices and play media with-

out additional settings. I SSeelleecctt AAVV ddeevviiccee:: Enables you to select one of the AV devices connected to TV. I DDiisscc ppllaayybbaacckk:: Control connected AV devices by pressing the I PPoowweerr ooffff aallll ddeevviicceess:: When you power off the TV, all connected devices are turned off. I SSwwiittcchh aauuddiioo--oouutt:: Offers an easy way to switch audio-out. I SSyynncc PPoowweerr oonn:: When you play the connected AV device, TV will automatically turn on.

(A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK, does not provide this function) Note: To operate SIMPLINK, an HDMI cable over Version 1.2 with *CEC function should be used. (*CEC: Consumer Electronics Control).

, ENTER, G, A, ll ll, FF and GG buttons. 1 2 3 TV Display SSIIMMPPLLIINNKK menu. ENTER Select the desired device. ENTER Control connected AV devices. SIMPLINK Menu 1 2 3 4 5 TTVV vviieewwiinngg: Switch to the previous TV channel regardless of the current mode. DDIISSCC ppllaayybbaacckk: Select and play discs. When multiple discs are available, the titles of discs are conveniently displayed at the bottom of the screen. VVCCRR ppllaayybbaacckk: Control the connected VCR. HHDDDD RReeccoorrddiinnggss ppllaayybbaacckk: Control recordings stored in HDD. AAuuddiioo OOuutt ttoo HHoommee TThheeaatteerr ssppeeaakk--

eerr//AAuuddiioo OOuutt ttoo TTVV: Select Home Theater speaker or TV speaker for Audio Out. 1 2 3 4 5 GG When no device is connected

(displayed in gray) GG Selected Device GG When a device is connected

(displayed in bright color) W A T C H I N G T V

C H A N N E L C O N T R O L 59 USB

* Except 32/37/42LG30DC ENTRY MODES When you connect a USB device, this screen is displayed automatically. In USB device, you can not add a new folder or delete the existing folder. 1 Connect the USB device to the UUSSBB IINN jacks on the side of TV. N I B S U U S B 2 Select PPHHOOTTOO LLIISSTT or MMUUSSIICC LL II SS TT PHOTO LIST MUSIC LIST 3 ENTER I It doesnt support USB HDD I This TV supports JPG and MP3. When removing the USB device Select the UUSSBB EEjjeecctt menu before removing the USB device. Select UUSSBB EEjjeecctt. 1Q. MENU 2 ENTER Precautions when using the USB device GG Only a USB storage device is recognizable. GG If the USB storage device is connected through a USB hub, the device is not recognizable. GG A USB storage device using an automatic recogni-

tion program may not be recognized. GG A USB storage device which uses its own driver may not be recognized. GG In case of a card reader, up to four memory cards are concurrently recognizable. GG The recognition speed of a USB storage device may depend on each device. GG Please do not turn off the TV or unplug the USB device when the connected USB storage device is working. When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged. GG Please do not connect the USB storage device which was artificially maneuvered on the PC. The device may cause the product to malfunction or fail to be played. Never forget to use only a USB storage device which has normal music files or image files. GG Please use only a USB storage device which was formatted as a FAT or NTFS file system provided with the Windows operating system. In case of a storage device formatted as a different utility pro-

gram which is not supported by Windows, it may not be recognized. GG Please connect power to a USB storage device which requires an external power supply. If not, the device may not be recognized. GG Please connect a USB storage device with cable is offered by USB maker. If connected with cable is not offered by USB maker or an excessively long cable, the device may not be recognized. GG Some USB storage devices may not be supported or operated smoothly. GG File alignment method of USB storage device is similar to Window XP and filename can recognize up to 100 English characters. GG Please backup important files because data on USB device may be damaged. Data management is consumer's responsibility and as a result, the man-

ufacturer does not cover data damage. 60

 

 

PHOTO LIST You can view .JPG files from USB storage devices. The On Screen Display on your model may be slightly different. Supported photo file: *.JPG I You can play JPG files only. I Only baseline scan is supported among JPG. Screen Components 1 MENU 2 Select UU SS BB. ENTER ENTER Select PPHHOOTTOO LLIISSTT. Moves to upper level file Preview: Display the thumbnail/folder name of the photo in the selected folder Current page/Total pages 2 PHOTO LIST TOP FOLDER Drive1 3 4 Page 1/1 No Marked Drive1 1 Total number of marked photos 2Folders, 4Files 5 USB Device Free Space 150MB Usable USB memory Corresponding buttons on the remote control 1 Upper Navigate PopUp Menu CH Move Page FAV Mark RETURN Exit 6 1 2 3 4 5 6 U S B 61 USB Photo Selection and Popup Menu PHOTO LIST TOP FOLDER Drive1 Page 1/1 No Marked Drive1 USB Device Free Space 150MB U S B 2Folders, 4Files Upper Navigate PopUp Menu CH Move Page FAV Mark RETURN Exit PHOTO LIST Drive1 Butterfly Page 1/1 No Marked Upper Photo X.Box 1366x768 125KB Upper USB Device Free Space 150MB 1366x768 125KB View Mark All Delete Cancel Navigate PopUp Menu CH Move Page FAV Mark RETURN Exit When you select a file (not folder), this PopUp menu is displayed. GG VViieeww: Display the selected item. GG MMaarrkk AAllll: Mark all photos on the screen. GG UUnnmmaarrkk AAllll: Deselect all marked photos. GG DDeelleettee: Delete the selected photo item. GG CCaanncceell: Close the pop-up menu. 1 2 3 4 ENTER ENTER Select the target folder or drive. Select the desired photos. Show the Popup menu. ENTER Select the desired Popup menu. I Use the CC HH photo page. button to navigation in the I Use the FFAAVV button to mark or unmark a photo. When one or more photos are marked, you can view individual photos or a slide show of the marked photos. If no photos are marked, you can view all photos individually or all pho-

tos in the folder in a slide show. 62 Full Screen Menu You can change the Photo List view so that it fills the screen. More operations are available in full screen mode. PHOTO LIST TOP FOLDER Drive1 Page 1/1 No Marked Drive1 USB Device Free Space 150MB 2Folders, 4Files Upper Navigate PopUp Menu CH Move Page FAV Mark RETURN Exit PHOTO LIST Drive1 Butterfly Page 1/1 No Marked Upper Photo X.Box 1366x768 125KB Upper USB Device Free Space 150MB 1366x768 125KB View Mark All Delete Cancel Navigate PopUp Menu CH Move Page FAV Mark RETURN Exit ENTER ENTER Select the target folder or drive. Select the desired photos. Show the Popup menu. Select VV ii ee ww. 1/17 Sideshow BGM Delete Option Hide The aspect ratio of a photo may change the size of the photo displayed on the screen in full size. ENTER The selected photo is displayed in full size. I Use the CC HH photo page. button to navigation in the 1 2 3 4 5 U S B 63 USB U S B 64 6 ENTER Select the SSiiddeesshhooww, BBGGMM, DDeelleettee, OOppttiioonn, or HHiiddee..

((RRoottaattee)), 1/17 Sideshow BGM Delete Option Hide I Use button to select the previous or next photo. I Use button to select and control the menu on the full-sized screen. GG SSiiddeesshhooww: Selected photos are displayed during the slide show. If no photo is selected, all photos in the cur-

rent folder are displayed during slide show. I Set the time interval of the slide show in OOppttiioonn. I A slide show continues for a maximum of 4 hours. After 4 hours, the slide show will end and go to TV mode or external input mode. GG BB GG MM: Listen to music while viewing photos in full size. I Set the BGM device and album in OOppttiioonn. GG

((RRoottaattee)): Rotate photos. I Rotates the photo 90, 180, 270, 360 clockwise. GG DDeelleettee: Delete photos. GG OOppttiioonn: Set values for SSlliiddee SSppeeeedd and MMuussiicc Press FF GG to set the time interval between slides. Slide Speed Music Folder Fast

... ENTER Cancel FFoollddeerr. I Use Then go to tings. button and EENNTTEERR button to set values. and press EENNTTEERR to save the set-

I You cannot change MMuussiicc FFoollddeerr while BGM is playing. GG HHiiddee : Hide the menu on the full-sized screen. I To see the menu again on the full-sized screen, press EENNTTEERR button to display. NOTE

GG This TV will not be able to decode most JPEG images saved using the Progressive option. MUSIC LIST You can use the Music List menu to play MP3 files form a USB storage device. This TV cannot play back copy-protected files. The On Screen Display on your model may be slightly different. Supported music file: *.MP3 Bit rate range 40Kbps ~ 320Kbps Sampling rate (Sampling Frequency) MPEG1 : 32000, 44100, 48000Hz MPEG2 : 16000, 24000, 22050Hz MPEG2.5 : 16 ~ 48KHz Screen Components 1 MENU 2 Select UU SS BB. ENTER ENTER Select MMUUSSIICC LLIISSTT. 1 2 3 4 5 6 Moves to upper level file Preview: If any album jacket for the file exists, this jack-

et is displayed. Current page/Total pages Total number of marked musics Usable USB memory Corresponding buttons on the remote control 2 1 3 4 Page 1/1 No Marked Title Upper Arirang Good Bye MUSIC LIST Drive1 Arirang 3945 KB, 128 Kbps Upper 5 USB Device Free Space 150MB Play Time 04:12 05:30 Navigate PopUp Menu CH Move Page FAV Mark RETURN Exit 6 U S B 65 USB Music Selection and Popup Menu Up to 6 music titles are listed per page. MUSIC LIST Drive1 Arirang Page 1/1 No Marked USB Device Free Space 150MB Title Play Time Upper Arirang Good Bye 04:12 05:30 3945 KB, 128 Kbps Upper Navigate PopUp Menu CH Move Page FAV Mark RETURN Exit MUSIC LIST Drive1 Arirang 3945 KB, 128 Kbps Upper Page 1/1 No Marked USB Device Free Space 150MB Title Play Time Upper Arirang Good Bye 3945 KB 128 Kbps Play Play with Photo Mark All Delete Cancel Navigate PopUp Menu CH Move Page FAV Mark RETURN Exit 1 2 3 4 ENTER ENTER Select the target folder or drive. Select the desired musics. Show the Popup menu. ENTER Select the desired Popup menu. 5RETURN Return to TV viewing U S B 66 GG PPllaayy (During stop): Play the selected music. Once a song finishes playing, the next selected one will be played. When there are no selected musics to play, the next one in the current fold-

er will be played. If you go to a different folder and press the EENNTTEERR button, the current music in playback will stop. GG PPllaayy MMaarrkkeedd: Play the selected musics. Once a music finishes playing, the next selected one will be played automatically. GG SSttoopp PPllaayy (During playback): Stop the play-

ing musics. GG PPllaayy wwiitthh PPhhoottoo: Start playing the selected musics and then move to the Photo List. GG MMaarrkk AAllll: Mark all musics in the folder. GG UUnnmmaarrkk AAllll: Deselect all marked music. GG DDeelleettee: Delete the selected music. GG CCaanncceell: Close the pop-up menu. I Use the CC HH the music page. button to navigation in I Use FF AA VV button to mark or unmark a music file. If no music is marked, all the music in the folder will be played in sequence. When one or more music files are marked, the marked music files will be played in sequence. If you want to listen to only one song repeatedly, just mark that one file and play. I The play information box (as shown below) will automatically move across the screen when there is no user input to pre-

vent a fixed image remaining on the screen for a extended period of time.

NOTE is displayed in front of the music play time. GG When music is playing, GG A damaged or corrupted music file that does not play displays 00:00 as the play time. GG Music files with copy-protection will not play. GG Press EENNTTEERR, AA , or RREETTUURRNN button to stop the screen saver. GG This TV can not play music files less than 16 Kbytes. U S B 67 PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. I RGB-PC input source use 4:3 or 16:9 aspect ratio.

NOTE GG If a fixed image is displayed on the screen for a long time, the image could become imprinted on the screen and remain visible. This phenomenon is common to all manufacturers and is not covered by warranty. Although, after watch-

ing video that did not fill the screen, any after-image from the black bars will normally dissipate after a few minutes. PICTURE Move Enter PICTURE Move Enter Aspect Ratio : 16:9 Picture Mode : Standard Aspect Ratio : 16:9 Picture Mode : Standard Backlight Contrast Brightness Sharpness Color Tint E 80 90 50 60 60 0 R Set By Program 4:3 16:9 Zoom1 Zoom2 Just Scan G I You can also adjust AAssppeecctt RRaattiioo in the QQ--MMeennuu. Backlight Contrast Brightness Sharpness Color Tint E 80 90 50 60 60 0 R G Select PPIICCTTUURREE. Select AAssppeecctt RRaattiioo. Select the desired picture format. Return to the previous menu. Return to TV viewing. 1 MENU 2 3 ENTER ENTER 4RETURN MENU P I C T U R E C O N T R O L 68 Set by program Selects the proper picture proportion to match the sources image.

(4:3 4:3) Zoom 1 Choose Zoom 1 when you want to view the pic-

ture without any alteration. However, the top and bottom portions of the picture will be cropped.

(16:9 16:9) Zoom 2 Choose Zoom 2 when you want the picture to be altered, both vertically extended and cropped. The picture taking a halfway trade off between alteration and screen coverage. 4:3 Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio. 16:9 Adjust the picture horizontally, in a linear pro-

portion to fill the entire screen. Just Scan Normally the edges of video signals are cropped 1-2%. Just Scan turns off this cropping and shows the complete video. Notes: If there is noise on the edges of the original signal, it will be visible when Just Scan is activated. JJuusstt SSccaann operates only in DTV/CADTV/Component/HDMI-DTV/DVI-DTV

(720p/1080i/1080p) input source. P I C T U R E C O N T R O L 69 PICTURE CONTROL PRESET PICTURE SETTINGS Picture Mode - Preset There are factory presets for picture settings available in the user menus. You can use a preset, change each setting manually, or use the Intelligent Sensor. PICTURE Move Enter PICTURE Move Enter Aspect Ratio : 16:9 Picture Mode : Standard Aspect Ratio : 16:9 Picture Mode : Standard Backlight Contrast Brightness Sharpness Color Tint E 80 90 50 60 60 0 R G Backlight Contrast Brightness Sharpness Color Tint E Intelligent Sensor 80 Vivid 90 Standard 50 Cinema 60 Sport 60 Game 0 R Expert1 Expert2 G Only for 47/52LG50DC 1 MENU Select PPIICCTTUURREE. 2 3 ENTER Select PPiiccttuurree MMooddee. ENTER Select IInntteelllliiggeenntt SSeennssoorr (Except 32/37/42LG30DC, Plasma TV), VViivviidd, SSttaannddaarrdd, CCiinneemmaa, SSppoorrtt, or GGaammee. 4RETURN MENU Return to the previous menu. Return to TV viewing. I When selecting IInntteelllliiggeenntt SSeennssoorr

(Except 32/37/42LG30DC, Plasma TV), the most suitable picture is automatically adjusted according to the surrounding conditions. I VViivviidd, SSttaannddaarrdd, CCiinneemmaa, SSppoorrtt, and GGaammee Settings are preset for the opti-

mum picture quality at the factory and are not adjustable. I You can also adjust PPiiccttuurree MMooddee in the QQ.. MMeennuu.ratio changes to Just scan. P I C T U R E C O N T R O L 70 Color Tone - Preset Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue. PICTURE Move Enter PICTURE Move Enter E 50 50 60 60 0 Contrast Brightness Sharpness Color Tint Advanced Control Reset R G E 50 50 60 60 0 Contrast Brightness Sharpness Color Tint Advanced Control Reset R G Screen (RGB-PC) Screen (RGB-PC) Color Temperature FF Medium GG Fresh Contrast Fresh Color Noise Reduction Gamma Black Level Eye Care Real Cinema TruMotion Off Off Off Medium Low Off Off High Close 1 MENU 2 ENTER Select PPIICCTTUURREE. Select AAddvvaanncceedd CCoonnttrrooll. ENTER Select CCoolloorr TTeemmppeerraattuurree. 3 4 Select CC oo oo ll, MMeeddiiuumm, or WW aa rr mm. 5RETURN MENU Return to the previous menu. Return to TV viewing. P I C T U R E C O N T R O L 71 PICTURE CONTROL MANUAL PICTURE ADJUSTMENT Picture Mode - User Mode Adjust the picture appearance to suit your preference and viewing situations. LCD TV only: This feature is disable in PPiiccttuurree MMooddee--IInntteelllliiggeenntt SSeennssoorr. Backlight EE 80 EE EE EE Enter PICTURE Move Enter Aspect Ratio : 16:9 Picture Mode : Standard Backlight Contrast Brightness Sharpness Color Tint E 80 90 50 60 60 0 R G Select PPIICCTTUURREE. Select PPiiccttuurree MMooddee. Select VViivviidd, SSttaannddaarrdd, CCiinneemmaa, SSppoorrtt, or GGaammee. Select BBaacckklliigghhtt (Only LCD TV), CCoonnttrraasstt, BBrriigghhttnneessss, SShhaarrppnneessss, CCoolloorr, or TT ii nn tt. Make appropriate adjustments. Return to the previous menu. Return to TV viewing. 1 MENU 2 ENTER 3 4 5 ENTER ENTER ENTER 6RETURN MENU P I C T U R E C O N T R O L 72 Picture Mode - Expert Control By segmenting categories, EExxppeerrtt11 and EExxppeerrtt22 provide more categories which users can set as they see fit, offering the optimal picture quality for users. PICTURE Move Enter Aspect Ratio : 16:9 Picture Mode : Standard Backlight Contrast Brightness Sharpness Color Tint E 80 90 50 60 60 0 R PICTURE Move Enter E Sport Game Expert1 Expert2 G Screen (RGB-PC) Fresh Contrast Noise Reduction 50 50 60 60 Black Level 0 Real Cinema Gamma R G Contrast Brightness Sharpness Color Tint Expert Control Reset Color Standard White Balance Method Red Contrast Green Contrast Blue Contrast E 1 MENU ENTER ENTER ENTER ENTER 2 3 4 5 6 7RETURN MENU Select PPIICCTTUURREE. Select PPiiccttuurree MMooddee. Select EExxppeerrtt11 or EExxppeerrtt22. Select EExxppeerrtt CCoonnttrrooll. Select your desired menu option. Make appropriate adjustments. Return to the previous menu. Return to TV viewing. FF Off GG Off Medium Off Off SD Normal 2 Points 50 50 50 P I C T U R E C O N T R O L 73 PICTURE CONTROL PICTURE IMPROVEMENT TECHNOLOGY Fresh Contrast: Optimizes the contrast automatically according to the brightness of the reflection. Fresh Color: Adjusts the color of the reflection automatically to reproduce as close as possible natural colors. Noise Reduction: Removes interference up to the point where it does not damage the original picture. Gamma: High gamma values display whitish images and low gamma values display high contrast images. PICTURE Move Enter PICTURE Move Enter Color Temperature Medium E 50 50 60 60 0 Contrast Brightness Sharpness Color Tint Advanced Control Reset R G Screen (RGB-PC) Screen (RGB-PC) E 50 50 60 60 0 Contrast Brightness Sharpness Color Tint Advanced Control Reset R G Fresh Contrast FF Off GG Fresh Color Noise Reduction Gamma Black Level Eye Care Real Cinema TruMotion Off Off Medium Low Off Off High Close 1 MENU ENTER ENTER 2 3 4 5RETURN MENU Select PPIICCTTUURREE. Select AAddvvaanncceedd CCoonnttrrooll. Select FFrreesshh CCoonnttrraasstt, FFrreesshh CCoolloorr, NNooiissee RReedduuccttiioonn, or GGaammmmaa. Select your desired options. Return to the previous menu. Return to TV viewing. P I C T U R E C O N T R O L 74 ADVANCED CONTROL - BLACK (DARKNESS) LEVEL Adjusting the contrast and the brightness of the screen using the black level of the screen. This feature is disabled in DTV and RGB-PC mode. PICTURE Move Enter PICTURE Move Enter E 50 50 60 60 0 Contrast Brightness Sharpness Color Tint Advanced Control Reset R G Screen (RGB-PC) Screen (RGB-PC) E 50 50 60 60 0 Contrast Brightness Sharpness Color Tint Advanced Control Reset R G Color Temperature Medium Fresh Contrast Fresh Color Noise Reduction Gamma Off Off Auto Medium Black Level FF Low GG Eye Care Real Cinema TruMotion Off Off High Close 1 MENU ENTER ENTER 2 3 4 5RETURN MENU Select PPIICCTTUURREE. Select AAddvvaanncceedd CCoonnttrrooll. I HH ii gg hh: The reflection of the screen gets I LL oo ww: The reflection of the screen gets darker. brighter. I AAuuttoo: Realizing the black level of the screen and set it to High or Low auto-

matically. Select BBllaacckk LLeevveell. Select LL oo ww or HH ii gg hh. Return to the previous menu. Return to TV viewing. P I C T U R E C O N T R O L 75 PICTURE CONTROL ADVANCED CONTROL - EYE CARE - LCD TV Only Dims extremely bright pictures. This feature is disabled in PPiiccttuurree MMooddee--VViivviidd, CCiinneemmaa. PICTURE Move Enter PICTURE Move Enter E 50 50 60 60 0 Contrast Brightness Sharpness Color Tint Advanced Control Reset R G Screen (RGB-PC) Screen (RGB-PC) E 50 50 60 60 0 Contrast Brightness Sharpness Color Tint Advanced Control Reset R G Color Temperature Medium Fresh Contrast Fresh Color Noise Reduction Gamma Black Level Eye Care Real Cinema TruMotion Off Off Off Medium Low FF Off GG Auto High Close 1 MENU ENTER ENTER 2 3 4 5RETURN MENU Select PPIICCTTUURREE. Select AAddvvaanncceedd CCoonnttrrooll. Select EEyyee CCaarree. Select OO nn or OO ff ff. Return to the previous menu. Return to TV viewing. P I C T U R E C O N T R O L 76 ADVANCED CONTROL - REAL CINEMA / FILM MODE Set up the TV for the best picture appearance for viewing movies. When you operate Real Cinema/Film Mode (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will adjust 24 fps video from movies to 30 fps video for display. I Plasma TV, 32/37/42LG30DC This feature operates only in TV (Analog TV/CATV, Digital DTV/CADTV), AV1, AV2, Component 480i/1080i, and HDMI 1080i mode. I 37/42/47/52LG50DC This feature operates only in TV (Analog TV/CATV, Digital DTV/CADTV), AV1, AV2, Component 480i/1080i, and HDMI 1080i mode. This TV ouputs 48Hz in DTV, Component, and HDMI 1080p (24Hz). PICTURE Move Enter PICTURE E 50 50 60 60 0 Contrast Brightness Sharpness Color Tint Advanced Control Reset R G Move Enter E Fresh Color Fresh Contrast Color Temperature 50 50 60 60 Noise Reduction 0 Contrast Brightness Sharpness Color Tint Advanced Control Reset Black Level Gamma R Off Off Off G Medium Low Screen (RGB-PC) Screen (RGB-PC) Film Mode FF Off GG Close For Plasma TV Medium Color Temperature Medium Fresh Contrast Fresh Color Noise Reduction Gamma Black Level Eye Care Off Off Off Medium Low Off Real Cinema FF Off GG TruMotion High Close For LCD TV 1 MENU Select PPIICCTTUURREE. 2 3 ENTER Select AAddvvaanncceedd CCoonnttrrooll. ENTER Select RReeaall CCiinneemmaa or FF ii ll mm MM oo dd ee. 4 5RETURN MENU Select OO nn or OO ff ff. Return to the previous menu. Return to TV viewing. P I C T U R E C O N T R O L 77 PICTURE CONTROL PICTURE RESET Settings of the selected picture modes return to the default factory settings. Move Enter E 50 50 60 60 0 Contrast Brightness Sharpness Color Tint Advanced Control Reset ii Resetting video configuration... R G PICTURE Move Enter PICTURE E 50 50 60 60 0 Contrast Brightness Sharpness Color Tint Advanced Control Reset R G Screen (RGB-PC) Screen (RGB-PC) 1 MENU 2 3 ENTER ENTER 4 MENU Select PPIICCTTUURREE. Select RReesseett. Initialize the adjusted value. Return to TV viewing. P I C T U R E C O N T R O L 78 POWER INDICATOR - LCD TV Only OPTION Language Input Label SIMPLINK Key Lock Caption Set ID Power Indicator Initial Setting Move Enter

: English

: On

: Off

: Off

: 1

: Home OPTION Language Input Label SIMPLINK Key Lock Caption Set ID Power Indicator Initial Setting Move Enter

: English

: On

: Off

: Off

: 1 Standby Light Power Light FF Off GG On

: Home Close 1 MENU ENTER ENTER 2 3 4 5RETURN MENU Select OOPPTTIIOONN. Select PPoowweerr IInnddiiccaattoorr. Select SSttaannddbbyy LLiigghhtt or PPoowweerr LLiigghhtt . I SSttaannddbbyy LLiigghhtt: You can set the brightness of the LED on the front side of the TV during power standby. I PPoowweerr LLiigghhtt: You can set the the LED on the front side of the TV to be turned on or off while watching the TV. Select your desired options. Return to the previous menu. Return to TV viewing. P I C T U R E C O N T R O L 79 PICTURE CONTROL IMAGE STICKING MINIMIZATION (ISM) METHOD - Plasma TV Only A frozen still picture from a PC/video game displayed on the screen for prolonged periods can result in a ghost image. You can use Orbiter to help prevent image sticking. The other two functions are for removing a ghost image. OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Move Enter

: English

: On

: Off

: Off

: Normal

: Level 0

: 1 EE Select OOPPTTIIOONN. Select IISSMM MMeetthhoodd. Select NNoorrmmaall,, OOrrbbiitteerr,, IInnvveerrssiioonn or WWhhiittee WWaasshh.. Return to the previous menu. Return to TV viewing. 1 MENU 2 3 ENTER ENTER 4RETURN MENU OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID EE Move Enter

: English

: On

: Off

: Off

: Normal

: Level 0

: 1 Normal Orbiter Inversion White Wash I NNoorrmmaall: If image sticking is never a problem, ISM is not necessary - set to Normal. I OO rr bb ii tt ee rr: Orbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a ghost image on the screen, the image will move every 2 min-

utes. I IInnvveerrssiioonn: Inversion will automatically invert the plasma display panel color every 30 minutes. I WW hh ii tt ee WW aa ss hh: White Wash removes ghost images from the screen. Use spar-

ingly. Watch the TV normally for a while before using this feature to see if the ghost image disappears on its own. NOTE

GG An excessive ghosted image may be impossible to clear entirely with White Wash. To return to nor-

mal viewing, press the any button. P I C T U R E C O N T R O L 80 POWER SAVING PICTURE MODE - Plasma TV Only It reduces the plasma displays power consumption. OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Move Enter

: English

: On

: Off

: Off

: Normal

: Level 0

: 1 EE OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Move Enter

: English

: On

: Off

: Off

: Normal

: Level 0

: 1 Level 0 Level 1 Level 2 Level 3 Level 4 EE 1 MENU 2 3 ENTER ENTER 4RETURN MENU Select OOPPTTIIOONN. Select PPoowweerr SSaavviinngg. Select LLeevveell 00, LLeevveell 11, LLeevveell 22, LLeevveell 33, or LLeevveell 44. Return to the previous menu. Return to TV viewing. I Level 0 is the brightest. I Level 0 > Level 1 > Level 2 > Level 3 >

Level 4 I You can also adjust PPoowweerr SSaavviinngg in the QQ.. MMeennuu. P I C T U R E C O N T R O L 81 SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER (AUTO VOLUME) Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. AUDIO Auto Volume Clear Voice Balance Sound Mode

: Off

: On Move Enter 0 L R

: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 AUDIO Auto Volume Clear Voice Balance Sound Mode

: On

: On Move Enter Off On 0 L R

: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 1 MENU Select AAUUDDIIOO. 2 3 ENTER Select AAuuttoo VVoolluummee. ENTER Select OO nn or OO ff ff. 4RETURN MENU Return to the previous menu. Return to TV viewing. S O U N D

L A N G U A G E C O N T R O L 82 PRESET SOUND SETTINGS (SOUND MODE) Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate sound options based on the program content. SSttaannddaarrdd, MMuussiicc, CCiinneemmaa, SS pp oo rr tt, and GG aa mm ee are preset for optimum sound quality at the factory and are not adjustable. AUDIO Auto Volume Clear Voice Balance Sound Mode

: Off

: On Move Enter 0 L R

: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 AUDIO Auto Volume Clear Voice Balance Sound Mode

: Off

: On Move Enter 0 L R

: Standard SRS TruSurround XT: Off Treble Bass Reset E Standard Music Cinema Sport Game 50 50 1 MENU Select AAUUDDIIOO. 2 3 ENTER Select SSoouunndd MMooddee. ENTER Select SSttaannddaarrdd, MMuussiicc, CCiinneemmaa, SSppoorrtt, or GGaammee. 4RETURN MENU Return to the previous menu. Return to TV viewing. I You can also adjust SSoouunndd MMooddee in the QQ.. MMeennuu. S O U N D

L A N G U A G E C O N T R O L 83 SOUND & LANGUAGE CONTROL SOUND SETTING ADJUSTMENT - USER MODE Adjust the sound to suit your taste and room situations. AUDIO Auto Volume Clear Voice Balance Sound Mode Move Enter

: Off

: On 0 L R

: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 1 MENU 2 ENTER 3 ENTER 4 ENTER Select AAUUDDIIOO. Select SSoouunndd MMooddee. Select SSttaannddaarrdd, MMuussiicc, CCiinneemmaa, SSppoorrtt, or GGaammee. Select TTrreebbllee or BB aass ss. SRS TRUSURROUND XT 1 MENU 2 3 ENTER ENTER 4RETURN MENU Select AAUUDDIIOO. Select SSRRSS TTrruuSSuurrrroouunndd XXTT Select OO nn or OO ff ff. Return to the previous menu. Return to TV viewing. S O U N D

L A N G U A G E C O N T R O L 84 AUDIO Auto Volume Clear Voice Balance Sound Mode 5 ENTER 6RETURN MENU

: Off

: On Move Enter 0 L R

: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 Treble Bass SRS TruSurround XT Off EE EE 50 50 Close Make appropriate adjustments. Return to the previous menu. Return to TV viewing. I SSRRSS TTrruuSSuurrrroouunndd XXTT: Takes advantage of any multi-channel format without needing to add extra speakers or equipment. Dialog clarity, bass enrichment, and the addition of stereo audio enhancement produces an immersive sound experience from standard stereo material. CLEAR VOICE By differentiating the human sound range from others, it improves the sound quality of voices. AUDIO Auto Volume Clear Voice Balance Sound Mode

: Off

: On Move Enter 0 L R

: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 AUDIO Auto Volume Clear Voice Balance Sound Mode

: Off

: On Move Enter Off On 0 L R

: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 1 MENU Select AAUUDDIIOO. 2 3 ENTER Select CClleeaarr VVooiiccee. ENTER Select OO nn or OO ff ff. 4RETURN MENU Return to the previous menu. Return to TV viewing. I If you select CClleeaarr VVooiiccee--OOnn, SS RR SS TT rr uu SS uu rr rr oo uu nn dd XX TT feature will not work. I You can also adjust CClleeaarr VVooiiccee in the QQ--MMeennuu. S O U N D

L A N G U A G E C O N T R O L 85 SOUND & LANGUAGE CONTROL BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. AUDIO Auto Volume Clear Voice Balance Sound Mode Move Enter

: Off

: On 0 L R

: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 AUDIO Auto Volume Clear Voice Balance Sound Mode Move Enter

: Off

: On 0 L Balance 0 R EE L R EE

: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 Close 1 MENU 2 3 ENTER ENTER 4RETURN MENU Select AAUUDDIIOO. Select BBaallaannccee. Make appropriate adjustments. Return to the previous menu. Return to TV viewing. S O U N D

L A N G U A G E C O N T R O L 86 TV SPEAKERS ON/OFF SETUP Turn the TV speakers off if using external audio equipment. AUDIO Clear Voice Balance Sound Mode TV Speaker E

: On Move Enter 0 L R

: Standard SRS TruSurround XT: Off Treble Bass Reset

: On 50 50 AUDIO Clear Voice Balance Sound Mode TV Speaker 1 MENU Select AAUUDDIIOO. 2 3 ENTER Select TTVV SSppeeaakkeerr. ENTER Select OO nn or OO ff ff. 4RETURN MENU Return to the previous menu. Return to TV viewing. E

: On Move Enter 0 L R

: Standard SRS TruSurround XT: Off Treble Bass Reset

: On 50 50 Off On S O U N D

L A N G U A G E C O N T R O L 87 SOUND & LANGUAGE CONTROL AUDIO RESET Settings of the selected Sound Mode return to the default factory settings.

: Off

: On Move Enter 0 L R Resetting audio configuration... ii

: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 AUDIO Auto Volume Clear Voice Balance Sound Mode Move Enter

: Off

: On 0 L R

: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 AUDIO Auto Volume Clear Voice Balance Sound Mode 1 MENU 2 3 ENTER ENTER 4 MENU Select AAUUDDIIOO. Select RReesseett. Initialize the adjusted value. Return to TV viewing. S O U N D

L A N G U A G E C O N T R O L 88 STEREO/SAP BROADCAST SETUP For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accom-

panies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used if the broadcast is only in Mono. Plasma TV Q.Menu LCD TV Q.Menu Aspect Ratio Power Saving Clear Voice Picture Mode Sound Mode Caption Multi Audio Sleep Timer Del/Add/Fav USB Eject CH 16:9 3 Off Vivid Standard Off FF English GG Off Add Eject Aspect Ratio Backlight Clear Voice Picture Mode Sound Mode Caption Multi Audio Sleep Timer Del/Add/Fav USB Eject CH 16:9 3 Off Vivid Standard Off FF English GG Off Add Eject Close Close Analog TV Digital TV 1Q. MENU 2 3 Q. MENU Select SS AA PP. Select MMoonnoo, SStteerreeoo, or SS AA PP. Return to TV viewing. 1Q. MENU 2 3 Q. MENU Select MMuullttii AAuuddiioo. Select other languages. Return to TV viewing. S O U N D

L A N G U A G E C O N T R O L 89 SOUND & LANGUAGE CONTROL AUDIO LANGUAGE Other languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV/CADTV mode. OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID E Move Enter

: English

: On

: Off

: Off

: Normal

: Level 0

: 1 OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Move Enter

: English Menu Audio

: On

: Off

: Off

: Normal

: Level 0

: 1 E English FF English GG Close 1 MENU ENTER ENTER 2 3 4 5RETURN MENU Select OOPPTTIIOONN. Select LLaanngguuaaggee. Select AAuuddiioo. Select your desired language:

EEnngglliisshh, SSppaanniisshh, or FFrreenncchh Return to the previous menu. Return to TV viewing. S O U N D

L A N G U A G E C O N T R O L 90 ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID E Move Enter

: English

: On

: Off

: Off

: Normal

: Level 0

: 1 OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Move Enter

: English Menu FF English GG English Close Audio

: On

: Off

: Off

: Normal

: Level 0

: 1 E 1 MENU Select OOPPTTIIOONN. 2 3 4 ENTER Select LLaanngguuaaggee. ENTER Select MMeennuu. Select your desired language. From this point on, the on-screen menus will be shown in the selected language. 5RETURN MENU Return to the previous menu. Return to TV viewing. S O U N D

L A N G U A G E C O N T R O L 91 SOUND & LANGUAGE CONTROL CAPTION MODE Analog Broadcasting System Captions Caption must be provided to help people with hearing loss watch TV. Select a caption mode for displaying cap-

tioning information if provided on a program. Analog caption displays information at any position on the screen and is usually the program's dialog. Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable. This TV is programmed to memorize the caption/text mode which was last set when you turned the power off. This function is only available when CCaappttiioonn Mode is set OO nn. OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Move Enter

: English

: On

: Off

: Off

: Normal

: Level 0

: 1 E Select OOPPTTIIOONN. OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Move Enter

: English

: On

: Off

: CC1

: Normal

: Level 0

: 1 E FF Mode On GG CC1 Digital Option Close I When selecting OO ff ff, Sub-menus for Analog, DTV, and Digital Option become disabled. Select CCaappttiioonn. I CCAAPPTTIIOONN The term for the words that scroll across the bottom of the TV screen;

usually the audio portion of the pro-

gram provided for the hearing impaired. I TT EE XX TT The term for the words that appear in a large black frame and almost cover the entire screen; usually messages provid-

ed by the broadcaster. Select OO nn. Select CC CC 11-44 or TTeexxtt11-44. Return to the previous menu. Return to TV viewing. 1 MENU ENTER ENTER 2 3 4 5RETURN MENU S O U N D

L A N G U A G E C O N T R O L 92 Digital Broadcasting System Captions Choose the language you want the DTV/CADTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program. This function in only available when Caption Mode is set On. OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Move Enter

: English

: On

: Off

: Off

: Normal

: Level 0

: 1 E Select OOPPTTIIOONN. Select CCaappttiioonn. Select OO nn. Select CC CC 11-44, TTeexxtt11-44, or SSeerrvviiccee11 - 66. Return to the previous menu. Return to TV viewing. 1 MENU ENTER ENTER 2 3 4 5RETURN MENU Move Enter

: English FF

: On

: Off

: CC1

: Normal

: Level 0

: 1 Mode On GG CC1 Digital Option E Close S O U N D

L A N G U A G E C O N T R O L 93 SOUND & LANGUAGE CONTROL Caption Option Customize the DTV/CADTV captions that appear on your screen. This function in only available when Caption Mode is set On. OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Move Enter

: English

: On

: Off

: Off

: Normal

: Level 0

: 1 OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID E E Move Enter

: English

: On

: Off FF

: CC1 Mode

: Normal

: Level 0

: 1 On GG Service1 Digital Option Close FF Size Font Text Color Text Opacity Bg Color Bg Opacity Edge Type Edge Color Custom GG A Standard Font 1 White Solid Black Solid None Black Close I SS ii zz ee: Set the word size. I FFoonntt: Select a typeface for the text. I TTeexxtt CCoolloorr: Choose a color for the text. I TTeexxtt OOppaacciittyy: Specify the opacity for the text color. I BBgg ((BBaacckkggrroouunndd)) CCoolloorr: Select a background color. I BBgg ((BBaacckkggrroouunndd)) OOppaacciittyy: Select the opacity for the background color. I EEddggee TTyyppee: Select an edge type. I EEddggee CCoolloorr: Select a color for the edges. 1 MENU Select OOPPTTIIOONN. 2 3 4 5 6 ENTER ENTER Select CCaappttiioonn Select OO nn. Select DDiiggiittaall OOppttiioonn. ENTER Select CCuussttoomm. Customize the SSttyyllee, FFoonntt, etc., to your preference. A preview icon is provided at the bottom of the screen, use it to see the caption language. 7RETURN MENU Return to the previous menu. Return to TV viewing. S O U N D

L A N G U A G E C O N T R O L 94 TIME SETTING CLOCK SETTING Auto Clock Setup The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function. TIME Move Enter

: Feb/21/2008 2:10 AM Clock

: Off Off Time On Time

: Off Sleep Timer : Off Auto Sleep : Off 1 MENU Select TT II MM EE. ENTER ENTER 2 3 4 5 6RETURN MENU Select CClloocckk. Select AAuuttoo. Select your viewing area time zone. U.S.A: EE aa ss tt ee rr nn, CC ee nn tt rr aa ll, MM oo uu nn tt aa ii nn, PPaacciiffiicc, AAllaasskkaa, or HHaawwaaiiii. Canada: EEaasstteerrnn, CCeennttrraall, MMoouunnttaaiinn, PPaacciiffiicc, NNeeww FF..llaanndd, or AAttllaannttiicc. Select AAuuttoo, OO ff ff, or OO nn (depending on whether or not your viewing area observes Daylight Saving time). Return to the previous menu. Return to TV viewing. FF Auto TIME Move Enter

: Feb/21/2008 2:10 AM Clock

: Off Off Time On Time

: Off Sleep Timer : Off Auto Sleep : Off Year Month Date Hour Minute GG 2008 2 21 2 AM 10 Time Zone Eastern Daylight Saving Auto Close I T M E S E T T I N G 95 FF Manual GG TIME Move Enter

: Feb/21/2008 2:10 AM Clock

: Off Off Time On Time

: Off Sleep Timer : Off Auto Sleep : Off Year Month Date Hour Minute 2008 2 21 2 AM 10 Time Zone Eastern Daylight Saving Auto Close TIME SETTING Manual Clock Setup If the current time setting is wrong, set the clock manually. TIME Move Enter

: Feb/21/2008 2:10 AM Clock

: Off Off Time On Time

: Off Sleep Timer : Off Auto Sleep : Off 1 MENU Select TT II MM EE. ENTER ENTER 2 3 4 5 6RETURN MENU Select CClloocckk. Select MMaannuuaall. Select the Year, Month, Date, Hour, or Minutes option. Set the Year, Month, Date, Hour, or Minutes option. Return to the previous menu. Return to TV viewing. I T M E S E T T I N G 96 AUTO ON/OFF TIME SETTING This function operates only if the current time has been set. The OOffff TTiimmee function overrides the OOnn TTiimmee function if they are both set to the same time. The TV must be in standby mode for the OOnn TTiimmee to work. If you do not press any button within 2 hours after the TV turns on with the OOnn TTiimmee function, the TV will automatically revert to standby mode. TIME Move Enter

: Feb/21/2008 2:10 AM Clock

: Off Off Time On Time

: Off Sleep Timer : Off Auto Sleep : Off TIME Move Enter

: Feb/21/2008 2:10 AM

: Off

: 6:30 AM (Once) Repeat Clock Off Time On Time Sleep Timer : Off Auto Sleep : Off Hour Minute Input Channel Volume FF Once 6 AM GG 30 TV TV 2-0 30 Close 1 MENU Select TT II MM EE. I To cancel OOnn//OOffff TTiimmee function, select OO ff ff. I Only for On Time function ENTER ENTER 2 3 4 5 6RETURN MENU Select OOffff ttiimmee or OOnn ttiimmee. Select RReeppeeaatt. Select OO ff ff, OO nn cc ee, EEvveerryyddaayy, MM oo nn~FF rr ii, MM oo nn~SS aa tt, WWeeeekkeenndd, or SSuunnddaayy. Select and set HHoouurr or MMiinnuuttee. Return to the previous menu. Return to TV viewing. 1 2 3 4 ENTER Select IInnppuutt. Select the desired input source. When Selecting TT VV:

set the channel at turn-on. Adjust to sound level at turn-on. I T M E S E T T I N G 97 TIME SETTING SLEEP TIMER SETTING The Sleep Timer turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. TIME Move Enter

: Feb/21/2008 2:10 AM Clock

: Off Off Time

: Off On Time Sleep Timer : Off Auto Sleep : Off TIME Move Enter

: Feb/21/2008 2:10 AM Clock

: Off Off Time

: Off On Time Sleep Timer : Off Auto Sleep : Off FF GG Off Close Select TT II MM EE. Select SSlleeeepp TTiimmeerr. Select OO ff ff, 11 00, 22 00, 33 00, 66 00, 99 00, 11 22 00, 11 88 00, or 22 44 00 minutes. I You can also adjust SSlleeeepp TTiimmeerr in the QQ--MMeennuu. Return to the previous menu. Return to TV viewing. 1 MENU 2 3 ENTER ENTER 4RETURN MENU I T M E S E T T I N G 98 AUTO SHUT-OFF SETTING TV will be automatically turned off, in case of no signal for 10 minutes. TIME Move Enter

: Feb/21/2008 2:10 AM Clock

: Off Off Time

: Off On Time Sleep Timer : Off Auto Sleep : Off TIME Move Enter

: Feb/21/2008 2:10 AM Clock

: Off Off Time

: Off On Time Sleep Timer : Off Auto Sleep : On Off On TV will be automatically turned off, in case of No Signal for 10 minutes. 1 MENU 2 3 ENTER ENTER 4RETURN MENU Select TT II MM EE. Select AAuuttoo SSlleeeepp. Select OO nn or OO ff ff. Return to the previous menu. Return to TV viewing. I T M E S E T T I N G 99 PARENTAL CONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broad-

casting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. It is also possible to block all program viewing for a time period. To use this function, the following must be done :

1. Set ratings and categories to be blocked. 2. Specify a password 3. Enable the lock V-Chip rating and categories Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be blocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to-

video movies use the Movie Rating System (MPAA) only. Ratings for Television programs including made-for-TV movies :

I TV-G (General audience) I TV-PG (Parental guidance suggested) I TV-14 (Parents strongly cautioned) I TV-MA (Mature audience only) I TV-Y I TV-Y7 (Children 7 years older)

(All children) SET PASSWORD & LOCK SYSTEM Setting up Your Password Set up blocking schemes to block specific channels, ratings, and external viewing sources. A password is required to gain access to this menu. For USA For Canada LOCK Move Enter LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block Enter Password

Close 1 MENU 2 1 4 7 3 6 9 2 5 8 0 ENTER Select LL OO CC KK. Input the password. I Enter the password as requested. I The TV is set up with the initial pass-

word 0-0-0-0. P A R E N T A L C O N T R O L

R A T I N G 100 Lock System Enables or disables the blocking scheme you set up previously. LOCK Move Enter LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Off On Lock System : On Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block 1 MENU 3 6 9 2 5 8 0 2 1 4 7 3 4 ENTER 5RETURN MENU ENTER Select LL OO CC KK. Input the password. Select LLoocckk SSyysstteemm. Select OO nn or OO ff ff. I When you select OO nn, the Lock System is enable. Return to the previous menu. Return to TV viewing. P A R E N T A L C O N T R O L

R A T I N G 101 PARENTAL CONTROL / RATINGS Set Password Change the password by inputting a new password twice. LOCK Move Enter LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block New

Confirm *

Close Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block ENTER Select LL OO CC KK. Input the password. Select SSeett ppaasssswwoorrdd. 3 6 9 1 4 7 2 5 8 0 Choose any 4 digits for your new password. As soon as the 4 digits are entered, re-enter the same 4 digits on the CCoonnffiirrmm. Return to the previous menu. Return to TV viewing. 1 MENU 3 6 9 2 5 8 0 2 1 4 7 3 4 ENTER 5RETURN MENU P A R E N T A L C O N T R O L

R A T I N G 102 CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. Block/Unblock Move CH Move Page MENU Previous RETURN Exit LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block 1 MENU ENTER Select LL OO CC KK. 2 1 4 7 3 4 5 3 6 9 2 5 8 0 Input the password. Select BBlloocckk CChhaannnneell. ENTER Select a channel to block or unblock. ENTER Block or unblock a channel. 6 MENU RETURN Return to the previous menu. Return to TV viewing. P A R E N T A L C O N T R O L

R A T I N G 103 PARENTAL CONTROL / RATINGS MOVIE & TV RATING Movie Rating (MPAA) - For USA only Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas. LOCK Move Enter LOCK Move Enter Blocking off : Permits all programs Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block G PG PG-13 R NC-17 X Blocking Off 1 MENU 2 1 4 7 3 4 3 6 9 2 5 8 0 ENTER 5RETURN MENU ENTER Select LL OO CC KK. Input the password. Select MMoovviiee RRaattiinngg. Select GG, PP GG, PPGG--1133, RR, NNCC--1177, XX, or BBlloocckkiinngg OOffff. Return to the previous menu. Return to TV viewing. I G (General audience) I PG (Parental guidance suggested) I PG-13 (Parents strongly cautioned) I R (Restricted) I NC-17 (No one 17 and under admitted) I X (Adult only) I Blocking Off (Permits all programs) GG If you set PG-13: G and PG movies will be available, PG-13, R, NC-17 and X will be blocked. P A R E N T A L C O N T R O L

R A T I N G 104 TV Rating Children - For USA only Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audi-

ences in the TV Rating - sub menu, your children can view those programs. LOCK Move Enter LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Age Fantasy Violence Close 1 MENU 2 1 4 7 3 4 5 3 6 9 2 5 8 0 ENTER ENTER 6RETURN MENU ENTER Select LL OO CC KK. Input the password. Select TTVV RRaattiinngg--CChhiillddrreenn. Select AA gg ee or FFaannttaassyy VViioolleennccee. I Age (applies to TV-Y, TV-Y7) I Fantasy Violence (applies to TV-Y7) Select block options. Return to the previous menu. Return to TV viewing. P A R E N T A L C O N T R O L

R A T I N G 105 PARENTAL CONTROL / RATINGS TV Rating General - For USA only Based on the ratings, blocks certain TV programs that you and your family do not want to view. LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Age Dialogue Language Sex Violence Close LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block ENTER Select LL OO CC KK. Input the password. Select TTVV RRaattiinngg--GGeenneerraall. Select AA gg ee, DDiiaalloogguuee, LLaanngguuaaggee, SS ee xx or VViioolleennccee. Select block options. Return to the previous menu. Return to TV viewing. I Age (applies to TV-G,TV-PG,TV-14,TV-

MA). I Dialogue-sexual dialogue (applies to TV-PG,TV-14). I Language-adult language (applies to TV-PG, TV-14, TV-MA). I Sex-sexual situations (applies to TV-PG, TV-14, TV-MA). I Violence (applies to TV-PG, TV-14, TV-

MA). 1 MENU 3 6 9 2 5 8 0 2 1 4 7 3 4 ENTER 5 ENTER 6RETURN MENU P A R E N T A L C O N T R O L

R A T I N G 106 TV Rating English - For CANADA only Selecting canadian english language rating system. LOCK Move Enter LOCK Move Enter Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block Blocking off : Permits all programs E C C8+

G PG 14+

18+

Blocking Off 1 MENU 3 6 9 2 5 8 0 2 1 4 7 3 4 ENTER 5RETURN MENU ENTER Select LL OO CC KK. Input the password. Select TTVV RRaattiinngg--EEnngglliisshh. Select EE, CC, CC88++, GG, PP GG, 1144++, 1188++, or BBlloocckkiinngg OOffff. Return to the previous menu. Return to TV viewing. I E (Exempt) I C (Children) I C8+ (Children eight years and older) I G (General programming, suitable for all audiences) I PG (Parental Guidance) I 14+ (Viewers 14 years and older) I 18+ (Adult programming) I Blocking Off (Permits all programs) P A R E N T A L C O N T R O L

R A T I N G 107 PARENTAL CONTROL / RATINGS TV Rating French - For CANADA only Selecting canadian french language rating system. LOCK Move Enter LOCK Move Enter Blocking off : Permits all programs Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block E G 8ans+

13ans+

16ans+

18ans+

Blocking Off 1 MENU 3 6 9 2 5 8 0 2 1 4 7 3 4 ENTER 5RETURN MENU ENTER Select LL OO CC KK. Input the password. Select TTVV RRaattiinngg--FFrreenncchh. Select EE, GG, 88aannss++, 1133aannss++, 1166aannss++, 1188aannss++, or BBlloocckkiinngg ooffff. Return to the previous menu. Return to TV viewing. I E (Exempt) I G (General) I 8ans+ (General-Not convenient for lit-

tle children) I 13ans+ (Not convenient for children of 13 years and younger) I 16ans+ (Not convenient for children of 16 years and younger) I 18ans+ (This programs is only for adults) I Blocking off (Permits all programs) P A R E N T A L C O N T R O L

R A T I N G 108 DOWNLOADABLE RATING This function may become available in the future and will be available only for digital channels. This function operates only when TV has received Region5 Rating data. LOCK Move Enter LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block E Humor Sport Cruelty Language Sadness Genre Age E Close I Based on rating table, your TV's OSD

(On Screen Display) may differ slightly from what is shown in this manual. 1 MENU 2 1 4 7 3 6 9 2 5 8 0 3 4 5 ENTER ENTER 6RETURN MENU ENTER Select LL OO CC KK. Input the password. Select DDoowwnnllooaaddaabbllee RRaattiinngg. Select desired DDoowwnnllooaaddaabbllee RRaattiinngg option. Select desired option and block it. Return to the previous menu. Return to TV viewing. P A R E N T A L C O N T R O L

R A T I N G 109 PARENTAL CONTROL / RATINGS EXTERNAL INPUT BLOCKING Enables you to block an input. LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block AV1 AV2 Component1 Component2 RGB-PC HDMI1 HDMI2 FF Off GG Off Off Off Off Off Off Close 32/37/42LG30DC, 47/52LG50DC AV1 AV2 Component1 Component2 RGB-PC HDMI1 HDMI2 HDMI3 HDMI4 FF Off GG Off Off Off Off Off Off Off Off Close Plasma TV 1 MENU ENTER Select LL OO CC KK. 2 1 4 7 3 4 5 3 6 9 2 5 8 0 Input the password. Select IInnppuutt BBlloocckk. ENTER Select input source. Select OO nn or OO ff ff. 6RETURN MENU Return to the previous menu. Return to TV viewing. P A R E N T A L C O N T R O L

R A T I N G 110 KEY LOCK The TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off. OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Move Enter

: English

: On

: Off

: Off

: Normal

: Level 0

: 1 OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Move Enter

: English Off On

: On

: On

: Off

: Normal

: Level 0

: 1 E E 1 MENU 2 3 ENTER ENTER 4RETURN MENU Select OOPPTTIIOONN. Select KKeeyy LLoocckk. Select OO nn or OO ff ff. Return to the previous menu. Return to TV viewing. I In KKeeyy LLoocckk OO nn, if the TV is turned off, press the rr / I, INPUT, CH ((DDEE or

)) button on the TV or POWER, INPUT, CH on the remote control. or NUMBER buttons I With the KKeeyy LLoocckk OOnn, the display

KKeeyy LLoocckk appears on the screen if any button on the front panel is pressed while viewing the TV. P A R E N T A L C O N T R O L

R A T I N G 111 APPENDIX TROUBLESHOOTING TThhee ooppeerraattiioonn ddooeess nnoott wwoorrkk nnoorrmmaallllyy.. The remote control doesnt work I Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. I Ensure that the batteries are installed with correct polarity (+ to +, - to -). I Ensure that the correct remote operating mode is set: TV, VCR etc. I Install new batteries. Power is suddenly turned off I Is the sleep timer set?

I Check the power control settings. Power interrupted. TThhee vviiddeeoo ffuunnccttiioonn ddooeess nnoott wwoorrkk.. No picture &No sound I Check whether the product is turned on. I Try another channel. The problem may be with the broadcast. I Is the power cord inserted into wall power outlet?

I Check your antenna direction and/or location. I Test the wall power outlet, plug another products power cord into the outlet where the products power cord was plugged in. Picture appears slowly after switching on I This is normal, the image is muted during the product startup process. Please contact your service center, if the picture has not appeared after five minutes. A P P E N D I X No or poor color or poor picture Horizontal/vertical bars or picture shaking I Adjust Color in menu option. I Keep a sufficient distance between the product and the VCR. I Try another channel. The problem may be with the broadcast. I Are the video cables installed properly?

I Activate any function to restore the brightness of the picture. I Check for local interference such as an electrical appliance or power tool. Poor reception on some channels I Station or cable product experiencing problems, tune to another station. I Station signal is weak, reorient antenna to receive weaker station. I Check for sources of possible interference. Lines or streaks in pictures No picture when connecting HDMI 112 I Check antenna (Change the direction of the antenna). I Check HDMI cable over version 1.3. The HDMI cables dont support HDMI version 1.3, it cause flickers or no screen display. In this case use the latest cables that support HDMI version 1.3. TThhee aauuddiioo ffuunnccttiioonn ddooeess nnoott wwoorrkk.. Picture OK & No sound I Press the VOL or VOLUME button. I Sound muted? Press MUTE button. I Try another channel. The problem may be with the broadcast. I Are the audio cables installed properly?

No output from one of the speakers I Adjust Balance in menu option. Unusual sound from inside the product I A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product. No sound when connecting HDMI/USB I Check HDMI cable over version 1.3. I Check USB cable over version 2.0. I Use normal MP3 file. TThheerree iiss aa pprroobblleemm iinn PPCC mmooddee.. ((OOnnllyy PPCC mmooddee aapppplliieedd)) The signal is out of range I Adjust resolution, horizontal frequency, or vertical frequency. I Check the input source. Vertical bar or stripe on background &

Horizontal Noise &

Incorrect position I Work the Auto configure or adjust clock, phase, or H/V position. (Option) Screen color is unstable or single color I Check the signal cable. I Reinstall the PC video card. A P P E N D I X 113 APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 2 Heres a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until its almost dry, and then use it to wipe the screen. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV. Cleaning the Cabinet I To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. I Please be sure not to use a wet cloth. Extended Absence CAUTION GG If you expect to leave your TV dormant for a long time (such as a vacation), its a good idea to unplug the power cord to protect against possible damage from lightning or power surges. A P P E N D I X 114 PRODUCT SPECIFICATIONS MODELS 32LG30DC

(32LG30DC-UA) 37LG30DC

(37LG30DC-UA) 42LG30DC

(42LG30DC-UA) Dimensions

(Width x Height x Depth) With stand Without stand 31.5 x 23.7 x 8.9 inches 801.8 x 604.2 x 227.3 mm 31.5 x 21.4 x 3.1 inches 801.8 x 544.1 x 79.0 mm 36.2 x 26.8 x 11.5 inches 919.6 x 682.3 x 293.8 mm 36.2 x 24.0 x 3.5 inches 919.6 x 610.3 x 89.0 mm 40.6 x 29.2 x 11.5 inches 1032.8 x 742.3 x 293.8 mm 40.6 x 26.3 x 4.5 inches 1032.8 x 670.1 x 115.1.0 mm Weight With stand Without stand 29.5 pounds / 13.4 kg 26.2 pounds / 11.9 kg 41.4 pounds / 18.8 kg 35.7 pounds / 16.2 kg 52.0 pounds / 23.6 kg 46.2 pounds / 21.0 kg MODELS 47LG50DC

(47LG50DC-UA) 52LG50DC

(52LG50DC-UA) 42PG60C

(42PG60C-UA) Dimensions

(Width x Height x Depth) With stand Without stand 45.5 x 32.0 x 13.5 inches 1156.2 x 813.1 x 342.9 mm 50.8 x 35.1 x 13.5 inches 1291.7 x 892.2 x 342.9 mm 41.1 x 28.9 x 12.1 inches 1044.4 x 735.4 x 308.0 mm 45.5 x 29.1 x 4.9 inches 1156.2 x 739.2 x 126.0 mm 50.8 x 32.1 x 5.4 inches 1291.7 x 817.0 x 139.3 mm 41.1 x 26.7 x 3.1 inches 1044.4 x 680.6 x 79.6 mm Weight With stand Without stand 64.3 pounds / 29.2 kg 54.2 pounds / 24.6 kg 87.0 pounds / 39.5 kg 76.9 pounds / 34.9 kg 61.7 pounds / 28.0 kg 55.1 pounds / 25.0 kg Power requirement Television System Program Coverage External Antenna Impedance Environment condition Operating Temperature Operating Humidity Storage Temperature Storage Humidity AC100-240V ~ 50/60Hz NTSC-M, ATSC, 64 & 256 QAM VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135 75 ohm 32 ~ 104F (0 ~ 40C) Less than 80%

-4 ~ 140F (-20 ~ 60C) Less than 85%

I The specifications shown above may be changed without prior notice for quality improvement. A P P E N D I X 115 APPENDIX PROGRAMMING THE REMOTE CONTROL The provided universal remote control can be programmed to operate most remote-controllable devices. Note that the remote may not control all models of other brands. Programming a code into a remote mode 1 2 3 4 5 6 Testing your remote control. To find out whether your remote control can operate other components without programming, turn on a component such as a STB and press the corresponding mode button (such as a SS TT BB) on the remote con-

trol, while pointing at the component. Test the PPOOWWEERR and CC HH buttons to see if the component responds correctly. If the component does not operate correctly, the remote control requires programming to operate the device. Turn on the component to be programmed, then press the corresponding mode button (such as SS TT BB) on the remote control. The remote control button of the desired device is illuminated. Press the MMEENNUU and MMUUTTEE buttons simultaneously, and the remote control is ready to be programmed with the code. Enter a code number using the number buttons on the remote control. Programming code numbers for the corresponding component can be found on the following pages. If the code is correct, the device will turn off. Press the MMEENNUU button to store the code. Test the remote control functions to see if the component responds correctly. If not, repeat from step 2. A P P E N D I X 116 Codes Brand Codes Brand Codes Remote Control Code VCR Brand AIWA AKAI 034 016 043 046 124 125 146 072 031 033 103 AMPRO ANAM AUDIO DYNAMICS 012 023 039 043 035 037 129 BROKSONIC 028 031 033 CANON 108 CAPEHART CRAIG 003 040 135 CURTIS MATHES 031 033 041 DAEWOO 005 007 010 064 065 108 110 111 112 116 117 119 108 012 023 039 043 034 053 059 006 017 025 027 029 031 034 035 036 037 046 101 129 131 138 153 003 008 009 010 034 031 033 063 072 107 109 144 147 132 136 012 045 004 018 026 034 043 063 137 150 DAYTRON DBX DYNATECH ELECTROHOME EMERSON FISHER FUNAI GE GO VIDEO HARMAN KARDON HITACHI INSTANTREPLAY 031 033 031 033 JCL 012 013 015 033 JCPENNY 040 066 101 043 012 031 033 043 048 050 055 060 130 150 152 014 034 039 043 047 048 JENSEN JVC KENWOOD LG (GOLDSTAR) 001 012 013 020 101 106 114 123 034 003 009 013 014 017 034 101 106 040 LLOYD LXI MAGIN MAGNAVOX MARANTZ MARTA MATSUI MEI MEMOREX MGA MINOLTA MITSUBISHI MTC MULTITECH NEC NORDMENDE OPTONICA PANASONIC PENTAX PHILCO PHILIPS PILOT PIONEER PORTLAND PULSAR QUARTZ QUASAR RCA REALISTIC RICO RUNCO SALORA 031 033 034 041 067 068 012 031 033 067 069 101 027 030 031 033 003 010 014 031 033 034 053 072 101 102 134 139 045 046 059 013 020 013 020 045 046 049 051 059 061 151 034 040 024 034 012 023 039 043 048 043 053 054 066 070 074 083 133 140 145 013 020 031 033 063 031 034 067 031 033 034 054 067 071 101 101 013 021 048 108 072 011 014 033 066 075 145 013 020 033 034 040 041 062 063 107 109 140 144 145 147 003 008 010 014 031 033 034 040 053 054 101 058 148 014 SEARS SCOTT SAMSUNG SANSUI SANYO SHARP SHINTOM SONY SOUNDESIGN STS SYLVANIA 032 040 102 104 105 107 109 112 113 115 120 122 125 022 043 048 135 003 007 010 014 102 134 017 037 112 129 131 003 008 009 010 013 014 017 020 031 042 073 081 101 031 054 149 024 003 009 031 052 056 057 058 076 077 078 149 034 013 031 033 034 059 067 034 010 034 039 043 034 039 043 031 033 070 019 031 033 034 101 034 006 008 013 042 047 059 082 112 131 040 101 TOTEVISION UNITECH 040 VECTOR RESEARCH 012 VICTOR 048 VIDEO CONCEPTS 012 034 046 VIDEOSONIC WARDS SYMPHONIC TANDY TATUNG TEAC TECHNICS TEKNIKA THOMAS TMK TOSHIBA 040 003 013 017 024 031 033 034 040 053 054 131 012 034 039 043 034 048 056 058 072 080 101 YAMAHA ZENITH A P P E N D I X 117 APPENDIX HDSTB Brand Codes Brand Codes Brand Codes HOUSTON TRACKER 033 037 039 051 HUGHES JANIEL JERROLD KATHREIN LEGEND LG LUTRON LUXOR MACOM 057 104 068 060 147 061 108 057 001 132 062 144 010 059 063 064 065 057 028 124 125 069 070 MEMOREX NEXTWAVE NORSAT PACE SKY SATELLITE 143 060 142 PANASONIC PANSAT 121 PERSONAL CABLE 117 PHILIPS 071 105 PICO 019 102 PRESIDENT PRIMESTAR 030 110 111 PROSAT RCA REALISTIC SAMSUNG SATELLITE SERVICE CO 028 035 047 057 072 066 106 043 074 123 085 SCIENTIFIC ATLANTA 032 138 SONY STARCAST SUPER GUIDE TEECOM 103 041 020 124 125 023 026 075 087 088 090 107 130 137 002 127 016 025 042 043 044 045 048 049 078 079 080 086 101 135 136 115 128 146 081 082 083 084 091 120 TOSHIBA UNIDEN VIEWSTAR WINEGARD ZENITH Brand MITSUBISHI NAD ONKYO PANASONIC PHILIPS PIONEER PROCEED PROSCAN Codes 002 023 008 017 003 009 013 004 026 021 005 006 Brand Codes RCA SAMSUNG SONY THOMPSON TOSHIBA YAMAHA ZENITH 005 006 011 015 007 005 006 019 008 009 018 010 016 025 ALPHASTAR DSR 123 AMPLICA 050 BIRDVIEW 051 126 129 CHANNEL MASTER 013 014 015 018 036 055 008 009 012 077 054 CHAPARRAL CITOH CURTIS MATHES 050 145 DRAKE DX ANTENNA ECHOSTAR 005 006 007 010 011 052 112 116 141 024 046 056 076 038 040 057 058 093 094 095 096 097 098 099 100 122 ELECTRO HOME 089 114 EUROPLUS 017 021 022 027 FUJITSU 133 134 GENERAL INSTRUMENT 003 004 016 029 HITACHI 031 059 101 139 140 DVD Brand Codes 022 020 014 005 006 027 APEX DIGITAL DENON GE HARMAN KARDON JVC LG MAGNAVOX MARANTZ 012 001 010 016 025 013 024 A P P E N D I X 118 IR CODES 1. How to Connect I Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes I Output waveform Single pulse, modulated with 37.917KHz signal at 455KHz Tc T1 Carrier frequency FCAR = 1/TC = fOSC/12 Duty ratio = T1/TC = 1/3 I Configuration of frame 1st frame Lead code Low custom code High custom code Data code Data code C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7 Repeat frame I Lead code I Repeat code I BBiitt ddeessccrriippttiioonn Bit 0 Repeat code Tf 9 ms 4.5 ms 9 ms 2.25 ms 0.55 ms Bit 1 A P P E N D I X 0.56 ms 1.12 ms 0.56 ms 2.24 ms I FFrraammee iinntteerrvvaall:: TTff The waveform is transmitted as long as a key is depressed. Tf Tf Tf=108ms @455KHz 119 APPENDIX Code

(Hexa) Function Note Code

(Hexa) Function Note 08 45 43 0B POWER Q.MENU MENU INPUT Remote control Button (Power On/Off) D6 TV Discrete IR Code Remote control Button

(TV Input Selection) Remote control Button C4 POWER ON Discrete IR Code Remote control Button

(Only Power On) 10-19 Number Key 0-9 Remote control Button C5 POWER OFF Discrete IR Code 4C 1A 09 02 03 00 01 1E 40 41 07 06 44 5B 7E 30 B0 BA B1 BD 8F 8E

- (Dash) FLASHBK MUTE VOL +

VOL -

CH CH FAV ENTER RETURN SIMPLINK AV MODE PLAY PAUSE STOP REC REW FF Remote control Button Remote control Button 5A AV1 Remote control Button

(Only Power Off) Discrete IR Code

(AV1 Input Selection) Remote control Button D0 AV2 Discrete IR Code Remote control Button

(AV2 Input Selection) Remote control Button BF COMPONENT1 Discrete IR Code Remote control Button

(Component1 Input Selection) Remote control Button D4 COMPONENT2 Discrete IR Code Remote control Button

(Component2 Input Selection) Remote control Button D5 RGB-PC Discrete IR Code Remote control Button

(RGB-PC Input Selection) Remote control Button CE HDMI1 Discrete IR Code Remote control Button

(HDMI1 Input Selection) Remote control Button CC HDMI2 Discrete IR Code Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button E9 DA 76 77 AF

(HDMI2 Input Selection) HDMI3 Discrete IR Code

(HDMI3 Input Selection) HDMI4 Discrete IR Code

(HDMI4 Input Selection) Ratio 4:3 Discrete IR Code

(Only 4:3 Mode) Ratio 16:9 Discrete IR Code

(Only 16:9 Mode) Ratio Zoom Discrete IR Code

(Only Zoom1 Mode)

* Use this feature depending on your model. A P P E N D I X 120 EXTERNAL CONTROL THROUGH RS-232C The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the TVs functions externally. I Note: RS-232C on this unit is intended to be used with third party RS-232C control hardware and software. The instructions below are provided to help with programming software or to test functionality using telenet software. RS-232C Setup i.e) REMOTE CONTROL IN VI) DIGITAL AUDIO OUT OPTICAL COAXIAL RS-232C IN

(CONTROL & SERVICE) AUDIO OUT R UDIO 1 N I V A S-VIDEO VIDEO L

(MONO) AUDIO R PC Type of Connector; D-Sub 9-Pin Male Communication Parameters I Baud rate : 9600 bps (UART) I Data length : 8 bits I Parity : None I Stop bit : 1 bit I Communication code : ASCII code I Use a crossed (reverse) cable.

NOTE GG This product has command echo back in the RS-232C Command. No. Pin Name 1 2 3 4 5 6 7 8 9 No connection RXD (Receive data) TXD (Transmit data) DTR (DTE side ready) GND DSR (DCE side ready) RTS (Ready to send) CTS (Clear to send) No Connection 1 6 5 9 A P P E N D I X 121 APPENDIX RS-232C Configurations Either cable below can be used. 7-Wire Configuration

(Serial female-female NULL modem cable) PC TV RXD TXD GND DTR DSR RTS CTS 2 3 5 4 6 7 8 3 2 5 6 4 8 7 TXD RXD GND DSR DTR CTS RTS 3-Wire Configurations

(Not standard) PC TV RXD TXD GND DTR DSR RTS CTS 2 3 5 4 6 7 8 3 2 5 6 4 7 8 TXD RXD GND DTR DSR RTS CTS D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9 OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Move Enter

: English

: On

: Off

: Off

: Level 0

: 1 FF 1 EE GG Close Set ID Use this function to specify a TV ID number. Refer to Real Data Mapping1. GG pp..112255. OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Move Enter

: English

: On

: Off

: Off

: Level 0

: 1 EE Select OOPPTTIIOONN. Select SSeett IIDD. Choose the desired TV ID number. The adjustment range of Set ID is 1~99. Return to the previous menu. Return to TV viewing. A P P E N D I X 122 1 MENU 2 3 ENTER ENTER 4RETURN MENU Command Reference List CCOOMMMMAANNDD11 CCOOMMMMAANNDD22 DATA

(Hexadecimal) CCOOMMMMAANNDD11 CCOOMMMMAANNDD22 DATA

(Hexadecimal) 01. Power 02. Input Select 03. Aspect Ratio 04. Screen Mute 05. Volume Mute 06. Volume Control 07. Contrast 08. Brightness 09. Color 10. Tint 11. Sharpness 12. OSD Select 13. Remote Control Lock Mode k x k k k k k k k k k k k a b c d e f g h i j k l m 00 ~ 01

(GG p.124)

(GG p.124) 00 ~ 01 00 ~ 01 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 01 00 ~ 01 14. Treble 15. Bass 16. Balance 17. Color Temperature 18. ISM Method 19. Power Saving 20. Auto Configuration 22. Channel Add/Del 23. Key 24. Backlight k k k k j j j m m m Only Plasma TV Model r s t u p q u b c g 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 02

(GG p.126) 00 ~ 01

(GG p.126) 00 ~ 01

(GG p.127) 00 ~ 64 Only LCD TV Model CCOOMMMMAANNDD11 CCOOMMMMAANNDD22 DATA00 DATA01 DATA02 DATA03 DATA04 DATA05

(Hexadecimal)

(Hexadecimal)

(Hexadecimal)

(Hexadecimal)

(Hexadecimal)

(Hexadecimal) 21. Channel Tuning m a physical major major low minor high minor low attribute program high program low Transmission / Receiving Protocol TTrraannssmmiissssiioonn

[[CCoommmmaanndd11]][[CCoommmmaanndd22]][[ ]][[SSeett IIDD]][[ ]][[DDaattaa]][[CCrr]]

[Command 1] : First command to control the set.(j, k, m or x)

[Command 2] : Second command to control the set.

[Set ID] : You can adjust the set ID to choose desired TV ID number in Setup menu. Adjustment range is 1~ 99. When selecting Set ID 0, every connected the TV is controlled. Set ID is indicated as decimal (1~ 99) on menu and as Hexa decimal (0x0~ 0x63) on transmission

/receiving protocol.

[DATA] : To transmit the command data. Transmit the FF data to read status of command.

[Cr] : Carriage Return ASCII code 0x0D

[ ] : ASCII code space (0x20)

* In this model, TV will not send the status during the standby mode. OOKK AAcckknnoowwlleeddggeemmeenntt

[[CCoommmmaanndd22]][[ ]][[SSeett IIDD]][[ ]][[OOKK]][[DDaattaa]][[xx]]

The TV transmits ACK (acknowledgement) based on this for-

mat when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer.

* In this model, TV will not send the status during the standby mode.

* Data Format

[Command 2] : Use as command.

[Set ID] : Use the small character, if set ID is 10, it will send the 0, a.

[DATA] : Use the small character, if data is 0 x ab, it will send the a, b.

[OK] : Use the large character. EErrrroorr AAcckknnoowwlleeddggeemmeenntt

[[CCoommmmaanndd22]][[ ]][[SSeett IIDD]][[ ]][[NNGG]][[DDaattaa]][[xx]]

The TV transmits ACK (acknowledgement) based on this for-

mat when receiving abnormal data from non-viable functions or communication errors. Data1: Illegal Code Data2: Not supported function Data3: Wait more time

* In this model, TV will not send the status during the standby mode.

* Data Format

[Command 2] : Use as command.

[Set ID] : Use the small character, if set ID is 10, it will send the 0, a.

[DATA] : Use the small character, if data is 0 x ab, it will send the a, b.

[NG] : Use the large character A P P E N D I X 123 0055.. VVoolluummee MMuuttee ((CCoommmmaanndd:: kk ee)) To control volume mute on/off. You can also adjust mute using the MUTE button on remote control. Transmission [k][e][ ][Set ID][ ][Data][Cr]

Data 00: Volume mute on (Volume off) Data 01: Volume mute off (Volume on) Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]

0066.. VVoolluummee CCoonnttrrooll ((CCoommmmaanndd:: kk ff)) To adjust volume. You can also adjust volume with the volume buttons on remote control. Transmission [k][f][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to Real data mapping. See page 125. Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]

0077.. CCoonnttrraasstt ((CCoommmmaanndd:: kk gg)) To adjust screen contrast. You can also adjust contrast in the PICTURE menu. Transmission [k][g][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to Real data mapping. See page 125. Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]

0088.. BBrriigghhttnneessss ((CCoommmmaanndd:: kk hh)) To adjust screen brightness. You can also adjust brightness in the PICTURE menu. Transmission [k][h][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to Real data mapping. See page 125. Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]

APPENDIX 0011.. PPoowweerr ((CCoommmmaanndd:: kk aa)) To control Power On/Off of the TV. Transmission [k][a][ ][Set ID][ ][Data][Cr]

Data 00: Power Off Data 01: Power On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]

* In a like manner, if other functions transmit FF data based on this format, Acknowledgement data feedback presents status about each function.

* Note: In this model, TV will send the Acknowledge after power on processing completion. There might be a time delay between command and acknowledge. 0022.. IInnppuutt SSeelleecctt ((CCoommmmaanndd:: xx bb)) To select input source for TV. Transmission [x][b][ ][Set ID][ ][Data][Cr]

Data 00: DTV (Antenna) Data 01: DTV (Cable) Data 10: Analog (Antenna) Data 11: Analog (Cable) Data 20: AV1 Data 21: AV2 Data 40: Component 1 Data 41: Component 2 Data 60: RGB-PC Data 90: HDMI1 Data 91: HDMI2 Data 92: HDMI3 Data 93: HDMI4 Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]

* Use the feature depending on your model. 0033.. AAssppeecctt RRaattiioo ((CCoommmmaanndd:: kk cc)) To adjust the screen format. Transmission [k][c][ ][Set ID][ ][Data][Cr]

Data 01: 4:3 05: Zoom 2 02: 16:9 06: Set by program 04: Zoom 1 09: Just scan A P P E N D I X Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]

Reserved 0044.. SSccrreeeenn MMuuttee ((CCoommmmaanndd:: kk dd)) To select screen mute on/off. Transmission [k][d][ ][Set ID][ ][Data][Cr]

Data 00: Screen mute off (Picture on) Data 01: Screen mute on (Picture off) Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]

124 0099.. CCoolloorr ((CCoommmmaanndd:: kk ii)) To adjust screen color. 1144.. TTrreebbllee ((CCoommmmaanndd:: kk rr)) To adjust treble. You can also adjust color in the PICTURE menu. You can also adjust treble in the AUDIO menu. Transmission [k][i][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to Real data mapping as shown below. Transmission [k][r][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to Real data mapping as shown. Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]

Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]

1100.. TTiinntt ((CCoommmmaanndd:: kk jj)) To adjust screen tint. 1155.. BBaassss ((CCoommmmaanndd:: kk ss)) To adjust bass. You can also adjust tint in the PICTURE menu. You can also adjust bass in the AUDIO menu. Transmission [k][j][ ][Set ID][ ][Data][Cr]

Data Red: 00 ~ Green: 64 (*transmit by Hexadecimal code)

*Refer to Real data mapping as shown below. Transmission [k][s][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to Real data mapping as shown below. Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]

Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]

1111.. SShhaarrppnneessss ((CCoommmmaanndd:: kk kk)) To adjust screen sharpness. 1166.. BBaallaannccee ((CCoommmmaanndd:: kk tt)) To adjust balance. You can also adjust sharpness in the PICTURE menu. You can also adjust balance in the AUDIO menu. Transmission [k][k][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to Real data mapping as shown below. Transmission [k][t][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to Real data mapping as shown below. Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]

Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]

1122.. OOSSDD SSeelleecctt ((CCoommmmaanndd:: kk ll)) 1177.. CCoolloorr TTeemmppeerraattuurree ((CCoommmmaanndd:: kk uu)) To select OSD (On Screen Display) on/off. Transmission [k][l][ ][Set ID][ ][Data][Cr]

To adjust color temperature. You can also adjust color temperature in the PICTURE menu. Data 00: OSD off Data 01: OSD on Transmission [k][u][ ][Set ID][ ][Data][Cr]

Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]

Data 00: Medium 01: Cool 02: Warm Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]

1133.. RReemmoottee CCoonnttrrooll LLoocckk MMooddee ((CCoommmmaanndd:: kk mm)) To lock the remote control and the front panel controls on the set. Transmission [k][m][ ][Set ID][ ][Data][Cr]

Data 00: Lock off Data 01: Lock on Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]

If youre not using the remote control and front panel controls on the TV, use this mode. When main power is on/off, remote control lock is released.

*Real data mapping 0 : Step 0 A : Step 10 (SET ID 10) F : Step 15 (SET ID 15) 10 : Step 16 (SET ID 16) 63 : Step 99 (SET ID 99) 64 : Step 100 A P P E N D I X 125 APPENDIX 1188.. IISSMM MMeetthhoodd ((CCoommmmaanndd:: jj pp))

(Only Plasma TV model) To avoid having a fixed image remain on screen. Transmission [ j ][p][ ][Set ID][ ][Data][Cr]

Data 01: Inversion 02: Orbiter 04: White Wash 08: Normal Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x]

1199.. PPoowweerr ssaavviinngg ((CCoommmmaanndd:: jj qq))

(Only Plasma TV model) To control the power saving function on/off. Transmission [ j ][q][ ][Set ID][ ][Data][Cr]

Data 00: Power saving off (Power Saving Level 0) 01: Power saving on (Power Saving Level 4) Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]

2200.. AAuuttoo CCoonnffiigguurraattiioonn ((CCoommmmaanndd:: jj uu)) To adjust picture position and minimize image shaking automatically. Auto configuration only works in RGB-PC mode. Transmission [ j ][u][ ][Set ID][ ][Data][Cr]

Data 1: To set Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]

2211.. CChhaannnneell TTuunniinngg ((CCoommmmaanndd:: mm aa)) To tune channel to following physical/major/minor number. Transmission [m][a][ ][Set ID][ ][Data00][ ][Data01]

[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]

Digital channels have a Physical, Major, and Minor channel number. The Physical number is the actual digital channel number, the Major is the number that the channel should be mapped to, and the Minor is the sub-channel. Since the ATSC tuner automatically maps the channel to the Major number, the Physical number is not required when sending a command. Data 00: Physical Channel Number NTSC air: 02~45, NTSC cable: 01, 0E~7D ATSC air: 01~45, ATSC cable: 01~87 Data 01 & 02: Major Channel Number Data 01: High byte Data 02: Low byte Two bytes are available for the Major and Minor, nor-

mally only the second byte is used. Data 03 & 04: Minor Channel Number Not needed for NTSC. A P P E N D I X 126 Data05:

7 0 1 Main/Sub Picture Main Sub 6 0 1 Two/One Part Channel Two One 5 0 1 Using Physical Channel 4 Reserved Use No Use x x x x x x x x x x 3 0 0 0 0 0 0 0 0 x 1 2 0 0 0 0 1 1 1 1 x 1 1 0 0 1 1 0 0 1 1 x 1 0 0 1 0 1 0 1 0 1 x 1 Step NTSC Air NTSC Cable ATSC Air ATSC Cable_std ATSC Cable_hrc ATSC Cable_irc ATSC cable_auto Reserved

... Reserved 2222.. CChhaannnneell AAdddd//DDeell ((CCoommmmaanndd:: mm bb)) To add and delete the channels Transmission [m][b][ ][Set ID][ ][Data][Cr]

Data 00: Channel Delete Data 01: Channel Add Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]

2233.. KKeeyy ((CCoommmmaanndd:: mm cc)) To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr]

Data Key code: Refer to page 120. Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]

2244.. BBaacckklliigghhtt ((CCoommmmaanndd:: mm gg))

(Only LCD TV model) To adjust screen backlight. Transmission [m][g][ ][Set ID][ ][Data][Cr]

Data Min:00 ~ Max:64 (*transmit by Hexadecimal code)

*Refer to Real data mapping. See page 125. Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]

The table above lists the binary code which must be converted to Hexadecimal before sending. For example:

The binary code to tune the sub source to an NTSC cable channel is 1000 0001, which translates to 81 in Hex.

* 7th bit : For which source do you want to change the channel.

* 6th bit: Use a two part or one part channel. Most cases just use 0 since its ignored when using NTSC.

* 5th bit: Use 0 with NTSC since it can only use the phys-

ical channel number. Normally use 1 for ATSC since most times it doesnt matter what the physical number is.

* 4th bit: Set to 0.

* 3-0 bits: Choose signal type.

* Tune Command Examples:

1. Tune to the analog (NTSC) cable channel 35. Data 00 = Physical of 35 = 23 Data 01 & 02 = No Major = 00 00 Data 03 & 04 = No Minor = 00 00 Data 05 = 0000 0001 in binary = 01 Total = ma 00 23 00 00 00 00 01 2. Tune to the digital (ATSC) local channel 30-3. Data 00 = Dont know Physical = 00 Data 01 & 02 = Major is 30 = 00 1E Data 03 & 04 = Minor is 3 = 00 03 Data 05 = 0010 0010 in binary = 22 Total = ma 00 00 00 1E 00 03 22 Acknowledgement[a][ ][Set ID][ ][OK][Data00][Data01]

[Data02][Data03][Data04][x][a][ ][Set ID]

[ ][NG][Data00][x]

A P P E N D I X 127