submitted | available | document details (if available) | source link |
---|---|---|---|
various | Users Manual Part 3 | Users Manual | 1.35 MiB |
TV Guide On Screen System continued System continued TV Guide On Screen TV Guide On Screen System Change Default Options Change Default Options lets you change default settings in the following categories:
General Default Options Record Defaults Remind Defaults Highlight Change Default Options, and press ENTER.
<General Default Options>
General Default Options lets you set defaults for the following:
The initial Info Box size when the TV guide on screen system is entered. Choices are No, Small, Large, and Last Used
(Default = Last Used). The Info Box size rotation when the Info key is pressed while in the TV guide on screen system. Choices are No only, Small only, Large only, No & Small, No &
Large, Small & Large, All (Default = All) Automatic entry into the TV guide on screen system (Auto-Guide) when the TV is powered On. Choices are On and Off (Default = On). Highlight General Default Options, and press the Menu key to dis-
play the General Default Options menu. Highlight Go to Service Bar to close the menu, change no infor-
mation, and return to the Setup Service Bar. When finished, press ENTER to highlight Done. Press ENTER again to close the menu and accept the changes. Highlight Cancel to close the menu, change no information, and return to the highlighted option. Owners Manual 81 TV Guide On Screen System TV Guide On Screen System continued System continued TV Guide On Screen
< Record Defaults>
Record Default Options lets you set defaults for the following:
When to start the record event. Choices are 120 minutes early to 120 minutes late, to On time. (Default = On time) When to end the record event. Choices are 120 minutes early to 120 minutes late, to On time. (Default = On time) Recorder choice: Please choose the HDD only. This TV does not provide other devices with a recording feature. Highlight Record Defaults, and press the Menu key to display the Record Default Options menu. Highlight Go to Service Bar to close the menu, change no infor-
mation, and return to the Setup Service Bar.
< Remind Defaults>
Remind Default Options lets you set defaults for the following:
Power On the TV, if Off, when a Reminder is scheduled. Choices are Yes and No.
(Default = No) Automatically tune the TV to the channel (TV must be On), when a Reminder is scheduled. Choices are Yes and No.
(Default = No) When to display the reminder screen. Choices are 30 seconds to 15 minutes early, to 30 seconds to 15 minutes late, to On time.
(Default = 1 min early) Highlight Remind Defaults, and press the Menu key to display the Remind Default Options menu. Highlight Go to Service Bar to close the menu, change no information, and return to the Setup Service Bar. When finished, press ENTER to highlight Done. Press ENTER again to close the menu and accept the changes. Highlight Cancel to close the menu, change no information, and return to the highlighted option. 82 Plasma TV TV Guide On Screen System continued System continued TV Guide On Screen TV Guide On Screen System Record And Remind Features And Remind Features Record V < Record >
You can set a show to Record in Listings, Search, and Schedule or change Record settings for a show in Schedule. There are 3 ways to set a show to Record:
W Once records the show one time W Regularly records the show every time the show airs on the same channel and starts at the same 1) Using the Record Button on the Remote time Press the Record button on the remote to record the show Once with current default settings (Start and End recording On Time). Each time you press the Record button, you change the record frequency (but not the default settings) among Once (default), Regularly, Daily, Weekly and then Cancel. Note: The proper Record icon appears on the show tile, as the W Weekly records the show each time the show airs on the same day of the week, on the same channel and starts at the same time W Off (not cancel) keeps the show in the list but will not record this show until the frequency is changed Record button is pressed. W Cancel (no icon displayed)does not record 2) From a Panel Menu Highlight a show, and press Menu to display the Episode Options menu. Highlight Set Recording, and press ENTER to display the Record Options menu. Highlight the Frequency option, and use the left and right arrows to choose among Once, Regularly, Weekly, and Off, as previously described. Recorder choice: Please choose the HDD only. This TV does not provide other devices with a recording feature. Note: Video Window Lock is operated to on or off using PIP button in Listings mode. Owners Manual 83 TV Guide On Screen System TV Guide On Screen System continued System continued TV Guide On Screen When finished, press ENTER to highlight Schedule Recording. Press ENTER again to close the menu. You see a Record icon for the selected frequency next to the show title. Highlight Cancel to close the menu, change no information, and return to the highlighted show. 3) Manual Recording Highlight the Schedule Service label, and press Menu to display the Schedule Options menu. Use the D / E / F / G buttons to move through the options. Use the number or Use the D / E / F / G buttons to change the infor-
mation, as necessary. Highlight New Manual Recording and press ENTER to display the Record Options menu. Current information (i.e., date, start and end times, channel, input) is displayed. Recorder choice: Please choose the HDD only. This TV does not provide other devices with a recording feature. 84 Plasma TV TV Guide On Screen System continued System continued TV Guide On Screen TV Guide On Screen System Use the left and right arrows to choose between Once, Daily, Weekly, and Off, as follows. W Once records the time, channel, input, recorder combi-
nation one time. W Daily records the time, channel, input, recorder combi-
nation Monday through Friday. W Weekly records the time, channel, input, recorder com-
bination once a week on this selected day of the week W Off (not cancel) keeps the time, channel, input, recorder combination in the list without recording until the frequency is changed. When finished, press ENTER to highlight Schedule Recording. Press ENTER again to close the menu. You see a Record icon for the selected frequency next to the show title. Note: Manual recording is listed by channel number. Highlight Cancel to close the menu, change no informa-
tion, and return to the highlighted show. Before a recording begins, a notification screen appears if you are using a Cable box and your TV is On. At that time, you can choose to start or cancel recording. If the TV is not On, the recording occurs as scheduled. If there is no activity for 3 minutes, the notification screen auto-
matically closes and completes the highlighted item. Record Conflict A conflict message appears for the following reasons:
a show set to Record overlaps with any part of another show pre-
viously set to Record, a show set to Record overlaps with a show previously set to auto-
tune Select one of these options:
W record anyway - this show will override an existing show set to Record or auto-tune W don't record this show - cancel the Recording Owners Manual 85 TV Guide On Screen System TV Guide On Screen System continued System continued TV Guide On Screen V < Remind >
You can set a show Reminder in Listings, Search, and Schedule or change Reminder settings for a show in Schedule. There are 2 ways to set a show Reminder:
1) From a Panel Menu Highlight a show, and press Menu to display the Episode Options menu. Highlight Set Reminder, and press ENTER to display the Remind Options menu. Highlight the Frequency option, and use the left and right arrows to choose between:
W Once sets a show reminder one time W Regularly sets a show reminder every time the show airs on the same channel and starts at the same time W Weekly sets a show reminder each time the show airs on the same day of the week, on the same channel and starts at the same time W Off keeps the show in the list but will not remind until the frequency is changed Power On the TV, if Off, when a Reminder is scheduled. Choices are Yes and No. (Default = No) Automatically tune the TV to the channel (TV must be On), when a Reminder is scheduled. Choices are Yes and No. (Default =
No) When to display the reminder screen. Choices are 30 seconds to 15 minutes early, to 30 seconds to 15 minutes late, to On time.
(Default = 1 min early) When finished, press ENTER to highlight Schedule Reminder. Press ENTER again to close the menu. You see a Remind icon for the selected frequency next to the show title. Highlight Cancel to close the menu, change no information, and return to the highlighted show. 86 Plasma TV TV Guide On Screen System continued System continued TV Guide On Screen TV Guide On Screen System 2) Manual Reminder Highlight the Schedule Service label, and press the Menu key to display the Schedule Options menu. Use the D / E / F / G buttons to move through the options. Use the number or D / E / F / G buttons to change the information, as necessary. Highlight New Manual Reminder and press the ENTER key to display the Remind Options menu. Current information (i.e., date, start and end times, channel, input, frequency, etc.) is displayed. Highlight the Frequency option, and use the F / G buttons to choose among Once, Daily, Weekly, and Off, as follows. W Once sets a show reminder for the time, channel, input, recorder combination one time W Daily reminds for the time, channel, input, recorder combination Monday through Friday W Weekly sets a show reminder for the time, channel, input, recorder combination once a week on this selected day of the week W Off (not cancel) keeps the time, channel, input, desti-
nation combination in the list without reminding until the fre-
quency is changed Power On the TV, if Off, when a Reminder is scheduled. Choices are Yes and No (Default =No). Automatically tune the TV to the channel (TV must be On), when a Reminder is scheduled. Choices are Yes and No
(Default = No). When finished, press ENTER to highlight Schedule Reminder. Press ENTER again to close the menu. You see a Remind icon for the selected frequency next to the show title. Note: Manual reminder is listed by channel number. Highlight Cancel to close the menu, change no information, and return to the highlighted show. Owners Manual 87 TV Guide On Screen System TV Guide On Screen System continued System continued TV Guide On Screen Based on your option settings, a notification screen will appear, if your TV is On at the reminder time. You can then choose to hide the reminder, or highlight the show, and press ENTER to tune to the show. If there is no activ-
ity for 3 minutes, the notification screen automatically closes and completes item (hide reminders). the highlighted If you choose Hide Reminders, the window closes for the show or shows, but does not affect other Reminders you set. Note: If more than 2 reminders are set for the same time, arrows appear on the Reminder screen. Use the D / E buttons to view the shows. Remind Conflict A conflict message appears for the following reasons:
a show set with an Auto-Tune Reminder has the same start time as an existing Auto-Tune Reminder. If you are using a cable box, a show set with an Auto-
Tune Reminder overlaps with a Recording already scheduled. Select one of these options:
W auto-tune anyway - this show will override an exist-
ing show set to auto-tune W proceed, no auto-tune - set the show as a Reminder but do not auto-tune W don't set this reminder - cancel the Reminder 88 Plasma TV Schedule Functions Schedule Functions Schedule Schedule
- Schedule lets you review, edit, or delete Record and Remind events that you set previously.
- With Schedule highlighted, press the Info button to display a Help screen. Press the Info button again to close the screen.
- An icon identifies the event type:
Record W Once records the show one time W Regularly , Daily records the show every time the show airs on the same channel and starts at the same time W Weekly records the show each time the show airs on the same day of the week, on the same channel and starts at the same time W Off keeps the show in the list but will not record this show until the frequency is changed. Remind W Once sets a show reminder one time W Regularly , Daily sets a show reminder every time the show airs on the same channel and starts at the same time W Weekly sets a show reminder each time the show airs on the same day of the week, on the same channel and starts at the same time W Off keeps the show in the list but will not remind until the frequency is changed Highlight an event, and press the Menu key for options. Go to Service Bar - closes the menu, changes no information, and returns to the Schedule Service Bar. Tune to channel - exits the tv guide on screen system and tunes to the highlighted show. Delete Recording - removes the recording from the Schedule, after a Confirm screen. Edit Recording - opens a menu from which you can change existing recording information. Set Reminder - opens a menu from which you can set a Reminder for the show (Record is not cancelled). Cancel - closes the menu, changes no information, and returns to the highlighted show. Owners Manual 89 IEEE 1394 IEEE 1394 Functions IEEE 1394 Functions IEEE 1394 IEEE 1394
- It's available to communicate to either direction and you can give and take a image, sound, or each control command with one cable.
- Only use the DVHS and MicroMV Camcorder to work the 1394. How to connect the 1394 To work the 1394, this 3 methods can used. 1. When connecting the DVHS or the MicroMV Camcorder, as shown in the (a) or (b) figure, select the IEEE 1394 in HOME menu to show the control panel.
(a) TV DVHS
(b) TV MicroMV Camcorder
<Connect the IEEE1394 Cable>
<Connect the IEEE1394 Cable>
<DVHS>
<MicroMV Camcorder>
<TV>
<TV>
2. When connecting the DVHS and the MicroMV Camcorder, as shown in the (c) figure, select the IEEE 1394 in HOME menu to show the contents panel and then select the DVHS or the MicroMV Camcorder to show the control panel.
(c) TV DVHS + MicroMV Camcorder
<Connect the IEEE1394 Cable>
<DVHS>
<TV>
<MicroMV Camcorder>
<Connect the IEEE1394 Cable>
When connecting the 1394 and then playing, you must use the original DVHS tape. If not, it may be occurred the errors. 90 Plasma TV IEEE 1394 IEEE 1394 functions continued IEEE 1394 functions continued DVHS DVHS VHow to play the DVHS 1. Connect the IEEE 1394 jack of the TV to the IEEE 1394 jack of the DVHS with IEEE 1394 Cable. 2. When watching the TV, press the button to move the IEEE 1394 in HOME menu and then ENTER button.
<DVHS>
<TV>
2. Press the D / E buttons to select the DVHS and then use the ENTER button. Show the control panel of DVHS. The control panel of DVHS
-Depending on the connected equipment, marked control panel may differ. 3 4 5
* Supported DVHS List 6 7 8 9 1. DVHS Company 2. DVHS Model 3. Connected Equipment to the 1394 4. DVHS Operating Status 5. Power On/Off 6. DVHS Play Time 7. Tape Status Tape shape Icon - Tape in or not Lock shape Icon - Use or not use VICTOR(HM-DH35000U) JVC(HM-DH30000U) JVC(HM-DH40000U) MITSUBISHI(HS-HD1100U) MITSUBISHI(HS-HD2000U) Hitachi(DT-DR20000) Hitachi(DT-DRX100) PANASONIC(NV-DH1) PANASONIC(NV-DH2) PANASONIC(NV-DHE20) TOSHIBA(A-HD2000) 8. Initializing Play Time 9. DVHS Play, Pause, Stop, Search or Skip
(Notes:
Skip- This function is for a fast search. It searches the programs start point and then plays. On skipping, Search (GG, FF), Rec(") Pause ( ) and Play (G) are displayed on the Control Panel. In some models, its not available to operate the Skipping ( FF, GG ) function. Owners Manual 91 IEEE 1394 functions continued IEEE 1394 functions continued VHow to play the instant reecord to the DVHS 1. When watching the TV, press the button to move the IEEE 1394 in HOME menu and then ENTER button. 2. Press the D / E buttons to select the DVHS and then use the ENTER button. Show the control panel of DVHS. 3. Press the D / E / F / G buttons to move to " and then use the ENTER button. You can record the current program to the DVHS. 4. Press the D / E / F / G buttons to move to # and then use the ENTER button. Show the control panel of DVHS. The instant record function couldnt use copy-protected programs. 92 Plasma TV IEEE 1394 functions continued IEEE 1394 functions continued VHow to save the DVHS to the DVR 1. On playing the DVHS, press the D / E / F / G buttons to move to DVR $ and then use the ENTER button. Save the current screen to the DVR. 2. Press the D / E / F / G buttons to move to DVR # and then use the ENTER button to end a saving. When you save the program which is copy - protected to the PVR, This tape is copy-protected is display on the screen and dont save to the PVR. Owners Manual 93 IEEE 1394 functions continued IEEE 1394 functions continued VHow to save the DVR to the DVHS 1. When press the button, record list is dis-
played. You can select the wanted program by pressing the D / E / F / G buttons. And then press the ENTER button. 2. Select the DVHS Out by pressing the D / E / F / G buttons and then press the ENTER button. 3. Press the D / E buttons to select the wanted device and move to the Record 4. Press the D / E / F / G buttons to move to the START and then press the ENTER button to save to DVHS. 5. Press the F / G buttons to move to the STOP and then press the ENTER button to stop a saving. By pressing the RESUME button, you can con-
tiously save the recorded contents from a point of stopping time. The copy-protected contents couldnt save to the DVHS. 94 Plasma TV IEEE 1394 IEEE 1394 functions continued IEEE 1394 functions continued MicroMV Camcorder MicroMV Camcorder How to play the MicroMV Camcorder E.E. 1. Connect the IEEE 1394 jack of the TV to the IEEE 1394 jack of the MicroMV Camcorder with IEEE 1394 Cable. 2. When watching the TV, press the button to move the IEEE 1394 in HOME menu and then ENTER button.
<MicroMV Camcorder>
<TV>
2. Press the D / E buttons to select the Camcorder and then use the ENTER button. Show the control panel of DVHS. The control panel of MicroMV Camcorder
-Depending on the connected equipment, marked control panel may dif-
fer. 3 4 5 6 7 8 1. MicroMV Camcorder Company 2. MicroMV Camcorder Model 3. Connected Equipment to the 1394 4. MicroMV Camcorder Operating Status 5. MicroMV Camcorder Play Time 6. Tape Status Tape shape Icon - Tape in or not Lock shape Icon - Use or not use 7. MicroMV Camcorder Play, Search or Stop 8. Initializing Play Time
* Supported MicroMV Camcorder List SONY MICORMV IP-5 SONY MICORMV IP-45 SONY MICORMV IP-210 SONY MICORMV IP-7 SONY MICORMV IP-55 SONY MICORMV IP-220 Owners Manual 95 IEEE 1394 IEEE 1394 functions continued IEEE 1394 functions continued how to save the MicroMV Camcorder to the DVR 1. On playing the MicroMV Camcorder, press the D / E / F / G buttons to move to DVR $ and then use the ENTER button. Save the current screen to the DVR. 2. Press the D / E / F / G buttons to move to DVR # and then use the ENTER button to end a saving. 96 Plasma TV IEEE 1394 functions continued IEEE 1394 functions continued How to connect the 1394 When connecting these 3 methods, the 1394 will not work properly. IEEE 1394
(a) LOOP Connection VHow to save the DVHS to the DVR
<Connect the IEEE1394 Cable>
(b) Daisy Chain 1. On playing the DVHS, press the D / E / F / G buttons to move to " and then use the ENTER button.
<Connect the IEEE1394 Cable>
<Connect the IEEE139 4 Cable>
<DVHS>
<TV>
<TV>
<MicroMV Camcorder>
<Connect the IEEE1394 Cable>
<DVHS>
(c) MicroMV Camcorder Daisy Chain
<Connect the IEEE1394 Cable>
or
<DVHS>
<MicroMV Camcorder>
<Connect the IEEE1394 Cable>
<TV>
Owners Manual 97 98 Plasma TV Function CableCARD Function CableCARD
* In this manual, the OSD (On Screen Display) may be different from your TVs because it is just example to help Operation the TV operation. Cable menu options Cable menu options
- The Cable sub menu displays when inserting the CableCARDTM to the TV.
- The CableCARDTM type is Motorola, Scientific Atlanta (SA), or SCM etc. The OSD (On screen display) is different from your TV according to your CableCARDTM type. 1. Press the MENU button and then use D / E button to select the CABLE menu. 2. Press the G button and then use D / E button to select your desired item. 3. Press the G button. 4. Press EXIT button to return to TV viewing. In case of Scientific Atlanta CableCARD SETUP SA CableCARD Diag Screen G SA CableCARD/Host ID Screen VIDEO AUDIO TIME OPTION LOCK CABLE MENU i.e) CableCARD/ Host ID Screen CableCARD Message In order to start service for this device, please contact customer service at Ph#: 1-866-303-0422 CableCARD(tm): 0-010-405-698-001 HOST ID: 0-080-000-000-226 EXIT Exit
- As shown, the pairing number means your TV and CableCARDTM ID. For further information regarding cable TV ser-
vice, contact your local cable TV service provider(s). Scrambled channel Scrambled channel
Insert the CableCARDTM. If you do it at first, it takes about 1 minute to exchange the data between the TV and the CableCARDTM. Then, TV screen displays as shown right.
- Let your cable TV service provider know CableCARDTM ID and Host ID.
If your cable TV service provider is registered CableCARDTM ID and Host ID, you can watch the premium or high value channel. If you ever registered to the cable TV service provider, you can watch the pre-
mium or high value channel without a message.
CableCARD Message In order to start cable service for this device, please contact SuperVision Cable at 1-800-555-8888 POD ID: 7-561-034-449-009 Host ID: 0-100-331-784-018 EXIT Exit Please call your operator and report an invalid CableCARDTM.
If the certificate dont match between the TV and the CableCARDTM, the OSD (On screen display) displays as shown left. Owners Manual 99 Operation Cable Channel List Cable Channel List 1. 3. G Selection ( G or ) leads you to the channel edit screen. SETUP EZ Scan VIDEO Manual Scan Channel Edit DTV Signal AUDIO Channel Label TIME OPTION LOCK CABLE Main Input Sub Input Input Label Set ID MENU Previous 2. 4. 1. If you enter the Channel Edit after running the EZ Scan, you can see the cable channel list. 2. Inserting the CableCARDTM. Then, the TV receive a new cable channel list. At this time, it takes about 2~3 minutes.
(Occasionally more than that time). Note:
As data gathering of CableCARDTM, it may make a noise by fan in standby mode. Emergency Alert Message Alert Message Emergency
If an emergency situation occur during watching the TV, you can receive a message from cable TV service provider(s).
- When receiving an emergency message, the message is displayed on the screen as shown below or the channel is changed automatically to a channel that maintains the emergency message. The message automatically disap-
peared. Emergency Action Notification Hurricane will be coming!!!
100 Plasma TV Operation Remote Control Remote Control PIPPIP (Picture-In-Picture) / POP
(Picture-In-Picture) / POP / T/ Twin Picture win Picture
- PIP lets you view 2 different inputs (sources) on your TV screen at the same time. One source will be large, and the other source will show a smaller inset image.
- Twin Picture mode splits the screen into 2, allowing 2 picture sources to be shown on the TV screen at the same time. Each source is given half the screen. If you set the block/rating for Lock menu options in PIP/Twin Picture mode, Rating Blocked doesnt display on screen.
W W WWatching PIP/POP/T atching PIP/POP/Twin Picture win Picture Press the PIP button to access the sub picture. Each press of PIP changes the PIP options as shown below. PIP Mode POP Mode Twin Picture Mode F D E TV 2-0 TV 4-0 TV 6-0 PIP Off W W Selecting an Input Signal Source for PIP/T Selecting an Input Signal Source for PIP/Twin Picture win Picture Use the PIP INPUT button to select the input source for the sub picture. Each press of PIP INPUT button changes the PIP source. You can also select sources for the Sub Input in the SETUP menu. Main Picture Source Available Sub Picture Sources DTV Analog Analog, Video, and Front Video DTV, Analog, Video, and Front Video W W Swapping the PIP Swapping the PIP/T/Twin Picture win Picture Repeatedly, use the SWAP button to switch the main and sub pictures. Component 1, Component 2, RGB-PC (or RGB-DTV), HDMI1/DVI,HDMI2 input sources for the main picture cant be used to swap the main and sub pictures. Main Picture Sub Picture Main Picture Sub Picture TV Program selection for PIP W W TV Program selection for PIP 1. Press the PIP button. 2. Select the Antenna or Cable option on the Sub input menu or with the PIP INPUT button. Use the PIPCH+ /
PIPCH- button to select a channel for the sub picture.
(You cant select DTV for main and sub picture simultaneously). Owners Manual 101 Operation W W Moving the PIP Moving the PIP sub picture sub picture In PIP mode, press the D / E / F / G button to move the sub picture to a different location on the screen. W W Adjusting Main and Sub Picture Sizes for Adjusting Main and Sub Picture Sizes for TTwin Picture win Picture Use the D / E / F / G button to change main and sub picture sizes in Twin Picture mode. i.e) If screen is adjusted to the maximal size, the large screen is filled with entire screen vertically as shown. W W POPPOP (Picture-out-of-Picture: Channel Scan)
(Picture-out-of-Picture: Channel Scan)
- Use POP to search the programs of all the memorized channels one-by-one on the 3 PIP screen display,
(while the main picture source remains the current channel). The pictures of all the programmed channels are searched with the 3 POP screen.
- Notes:
Run EZ Scan channel search before using POP mode. When Sub pictures are changed from the TV/DTV to CATV/CADTV in POP mode, it may make a noise from the Tuner switch. 1. Press the PIP button to activate the POP mode while in PIP mode. Channel selection: Use F button to enlarge the selected channel being searched on the PIP screen to shift it for viewing on the Main screen. PIP selection: Use D / E button to select one of 3 PIP screen pictures in POP mode. When watching TV/CATV on Main picture, TV/CATV or DTV/CADTV on Sub pictures are in chan-
nel scanning. However, when watching DTV/CADTV on Main picture, only TV/CATV on Sub pic-
ture is in channel scanning. 2. Press the EXIT button to cancel POP mode. F D E TV 2-0 TV 4-0 TV 6-0 102 Plasma TV Operation Information Information Operation: Watching TV/DTV/CATV/CADTV Watching Video, Front Video Watching IEEE 1394 In Component1, Component2, RGB, HDMI1/DVI,HDMI2 modes, INFO button is not working. Function: Show the present screen information. On Watching with the upper Input signal, press the INFO button. Press the INFO button or EXIT button to exit. A: Banner information, Refer to the
<Channel Banner>. B: Program title C: Day, Month, Year D: Program start time E: Program finish time F: Show the prosessing rate G: Present time H: Added information. Refer to the icon explanation. I: Gemster information 4 : 3 16 : 9 Screen Ratio of Input Signal 4:3 Screen Ratio of Input Signal 16:9 480i 480p 720p 1080i Resolution of Input Signal 720x480i Resolution of Input Signal 720x480p Resolution of Input Signal 1280x720p Resolution of Input Signal 1920x1080i Multilingual : Input Signal have over two Audio infor-
mation. Press the SAP button to select wanted Audio. Caption: Input Signal have over one Close service. Press the CC button to select wanted Closed caption. CC Input Signal have rating information . Refer to the
<Lock Menu>. D (Dialogue), L (Language), S (Sex), V (Violence), FV
(Fantasy Violence) B C D F E Live Eden 1080I Sat, Dec 20, 2003 7:00PM 9:00PM H Multilingual CC Caption 16 : 9 Wide I G A TV 6-0 MONO STEREO CNBC Owners Manual 103 Operation EZ Mute EZ Mute
- Nothing to do with Caption on/Off using Mute button, the mode selected Caption/Text is to be displayed.
- When you repeatedly press the Mute button, the screen is displayed in turn. (Refer to the lower picture) Note:
EZ Mute only operates in DTV/Analog/Video/Front Video/IEEE1394. 104 Plasma TV External Control Device Setup External Control Device Setup External Control Device Setup
- Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) and control the Monitors functions externally.
- Connect the serial port of the control device to the RS-232C jack on the Monitor back panel.
- RS-232C connection cables are not supplied with the Monitor. RS-232C Setup RS-232C Setup RS-232C INPUT
(CONTROL/SERVICE) I E E E 1 3 9 4 HDMI 2 HDMI /DVI OUTPUT COMPONENT2 INPUT DVI INPUT DIGITAL AUDIO (OPTICAL) RGB INPUT AUDIO INPUT VIDEO INPUT AUDIO INPUT DVD
/DTV INPUT L R VIDEO L AUDIO R COMPONENT 2 COMPONENT 1 MONITOR OUTPUT A/V INPUT1
(MONO) S V I D E O PC TType of Connector; D-Sub 9-Pin Male ype of Connector; D-Sub 9-Pin Male No. Pin Name 1 2 3 4 5 6 7 8 9 No connection RXD (Receive data) TXD (Transmit data) DTR (DTE side ready) GND DSR (DCE side ready) RTS (Ready to send) CTS (Clear to send) No Connection RS-232C Configurations RS-232C Configurations 1 5 9 6 7-Wire Configurations
(Standard RS-232C cable) 3-Wire Configurations
(Not standard) PC 2 3 5 4 6 7 8 RXD TXD GND DTR DSR RTS CTS PDP 3 2 5 6 4 8 7 TXD RXD GND DSR DTR CTS RTS PC 2 3 5 4 6 7 8 RXD TXD GND DTR DSR RTS CTS PDP 3 2 5 4 6 7 8 TXD RXD GND DTR DSR RTS CTS D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9 Owners Manual 105 External Control Device Setup Set ID Set ID Use this function to specify a monitor ID number. Refer to Real Data Mapping. See page 82. 1. Press the MENU button and then use D / E button to select the SETUP menu. 2. Press the G button and then use D / E button to select SET ID. 3. Press the G button and then use D / E button to adjust SET ID to choose the desired monitor ID number. The adjustment range of SET ID is 1 ~ 99. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. SETUP EZ Scan VIDEO Manual Scan Channel Edit DTV Signal AUDIO Channel Label TIME OPTION LOCK CABLE Main Input Sub Input Input Label Set ID MENU Previous G 1 1 Communication Parameters Communication Parameters Baud rate : 9600 bps (UART) Data length : 8 bits Parity : None
* Use a crossed (reverse) cable. Stop bit : 1 bit Communication code : ASCII code TTransmission / Receiving Protocol ransmission / Receiving Protocol Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* [Command 1]: First command to control the set. (j or k)
* [Command 2]: Second command to control the set.
* [Set ID]: You can adjust the set ID to choose desired monitor ID number in Setup menu. Adjustment range is 1
~ 99. When selecting Set ID 0, every connected the TV is controlled. Set ID is indicated as decimal
(1~99) on menu and as Hexa decimal (0x0~0x63) on transmission/receiving protocol.
* [DATA]: To transmit command data. Transmit FF data to read status of command.
* [Cr]: Carriage Return ASCII code 0x0D
* [ ]: ASCII code space (0x20) OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The Monitor transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer. Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* The Monitor transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-viable functions or communication errors. Data 1: Illegal Code 2: Not supported function 3: Wait more time Command Reference List Command Reference List COMMAND 1 COMMAND 2 DATA
(Hexadecimal) k 01. Power k 02. Input Select k 03. Aspect Ratio k 04. Screen Mute k 05. Volume Mute k 06. Volume Control k 07. Contrast k 08. Brightness k 09. Color k 10. Tint k 11. Sharpness k 12. OSD Select 13. Remote Control Lock Mode k k 14. PIP/Twin k 15. PIP Position k 16. Treble 17. Bass k k 18. Balance k 19. Color Temperature k 20. PIP Input Source 21. ISM Method j j 22. Low Power j 23. Orbiter Time Setting 24. Orbiter Pixel Setting j a b c d e f g h i j k l m n q r s t u y p q r s 0 ~ 1 0 ~ 9
0 ~ 1 0 ~ 2 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 1 0 ~ 1 0,1,2,5 0 ~ 3 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 2 0 ~ 3
0 ~ 1 1 ~ FE 1 ~3 DATA 2 DATA 3 DATA 4 DATA 5
(Hexadecimal)
(Hexadecimal)
(Hexadecimal)
(Hexadecimal) 01 ~ 87 00 ~ FE 00 ~ FF 00 ~ FF 00 ~ FF
(Hexadecimal) DATA 1 DATA 0 COM-
MAND 1 COM-
MAND 2
(Hexadecimal) 25. Channel Tuning m a 26. Channel Add/Del m b m c *
27. Key 28. Input Select x b *
29. PIP Input Select x y *
106 Plasma TV 01 ~ 87 00 ~ 01 External Control Device Setup 01. Power (Command2:a) G To control Power On/Off of the Monitor. Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 0 : Power Off Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
1 : Power On 05. Volume Mute (Command2:e) G To control volume mute on/off. You can also adjust mute using the MUTE button on remote control. Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 0 : Volume mute off (Volume on) 1 : Volume mute on (Volume off)
* In a like manner, if other functions transmit FF data based on this format, Acknowledgement data feedback presents status about each function. Acknowledgement
[e][ ][Set ID][ ][OK][Data][x]
02. Input Select (Command2:b) (Main Picture Input) G To adjust volume. 06. Volume Control (Command2:f) G To select input source for the Monitor. Transmission
[k][b][ ][Set ID][ ][Data][Cr]
Data 0: DTV 1: Analog 2: Video1 3: Video2 4: Component 1 Acknowledgement
[b][ ][Set ID][ ][OK][Data][x]
5: Component 2 6: RGB-DTV 7: RGB-PC 8: HDMI1/DVI 9: HDMI2 03. Aspect Ratio (Command2:c) (Main picture format) G To adjust the screen format. You can also adjust the screen format using the RATIO button on remote control or in the Option menu. Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Date 1: 4:3 2: 16:9 3: Horizon 4: Zoom 1 5: Zoom 2 Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
6: Set by program 10: Cinema Zoom (1) 1F: Cinema Zoom (16) 04. Screen Mute (Command2:d) G To select screen mute on/off. Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 0 : Screen mute off (Picture on) 1 : Screen mute on (Picture off) Acknowledgement
[d][ ][Set ID][ ][OK][Data][x]
You can also adjust volume with the volume buttons on remote control. Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64 Refer to Real data mapping as shown below. Acknowledgement
[f][ ][Set ID][ ][OK][Data][x]
07. Contrast (Command2:g) G To adjust screen contrast. You can also adjust contrast in the Video menu. Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64 Refer to Real data mapping as shown below. Acknowledgement
[g][ ][Set ID][ ][OK][Data][x]
08. Brightness (Command2:h) G To adjust screen brightness. You can also adjust brightness in the Video menu. Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64 Refer to Real data mapping as shown below. Acknowledgement
[h][ ][Set ID][ ][OK][Data][x]
* Real data mapping 0 : Step 0 A : Step 10 (SET ID 10) F : Step 15 (SET ID 15) 10 : Step 16 (SET ID 16) 63 : Step 99 (SET ID 99) 64 : Step 100 Owners Manual 107 External Control Device Setup 09. Color (Command2:i) G To adjust the screen color. You can also adjust color in the Video menu. Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64 Refer to Real data mapping. See page 82. Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
10. Tint (Command2:j) G To adjust the screen tint. You can also adjust tint in the Video menu. Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data Red : 0 ~ Green : 64 Refer to Real data mapping. See page 82. Acknowledgement
[ j ][ ][Set ID][ ][OK][Data][x]
11. Sharpness (Command2:k) G To adjust the screen sharpness. You can also adjust sharpness in the Video menu. Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64 Refer to Real data mapping. See page 82. Acknowledgement
[k][ ][Set ID][ ][OK][Data][x]
12. OSD Select (Command2:l) G To select OSD (On Screen Display) on/off. Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 0: OSD off 1: OSD on Acknowledgement
[l][ ][Set ID][ ][OK][Data][x]
13. Remote Control Lock Mode (Command2:m) G To lock the remote control and the front panel controls on the set. Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 0: Lock off Acknowledgement
[m][ ][Set ID][ ][OK][Data][x]
1: Lock on 108 Plasma TV 14. PIP / POP / Twin Picture (Command2:n) G To control the PIP (Picture-in-Picture)/POP/Twin picture. You can also control the PIP/POP/Twin picture using the PIP button on the remote control. Transmission
[k][n][ ][Set ID][ ][Data][Cr]
Data 0: PIP off 1: PIP Acknowledgement
[n][ ][Set ID][ ][OK][Data][x]
2: POP 3: Twin Picture 15. PIP Position (Command2:q) G To select sub picture position for PIP. Transmission
[k][q][ ][Set ID][ ][Data][Cr]
Data 0: Right down on screen 1: Left down on screen 2: Left up on screen 3: Right up on screen Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
16. Treble (Command2:r) G To adjust treble. You can also adjust treble in the Audio menu. Transmission
[k][r][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64 Refer to Real data mapping. See page 82. Acknowledgement
[r][ ][Set ID][ ][OK][Data][x]
17. Bass (Command2:s) G To adjust bass. You can also adjust bass in the Audio menu. Transmission
[k][s][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64 Refer to Real data mapping. See page 82. Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
18. Balance (Command2:t) G To adjust balance. You can also adjust balance in the Audio menu. Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64 Refer to Real data mapping. See page 82. Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
19. Color Temperature (Command2:u) G To adjust color temperature. You can also adjust color temperature in the Video menu. Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 0: Cool 1: Medium 2: Warm Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
20. PIP Input Select (Command2:y) G To select input source for sub picture in PIP/Twin pic-
ture mode. Transmission
[k][y][ ][Set ID][ ][Data][Cr]
Data 0: DTV 1: Analog 2: Video1 3: Video2 Acknowledgement
[y][ ][Set ID][ ][OK][Data][x]
21. ISM Method (Command2:p) G To avoid having a fixed image remain on screen. Transmission
[ j ][p][ ][Set ID][ ][Data][Cr]
Data 1: Inversion 2: Orbiter 4: White Wash 8: Normal Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
22. Low Power (Command2:q) G To control the low power function on/off. Transmission
[ j ][q][ ][Set ID][ ][Data][Cr]
Data 0: low power off 1: low power on Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
23. Orbiter Time Setting (Command2:r) G To adjust orbiter operation time term. Transmission
[ j ][r][ ][Set ID][ ][Data][Cr]
Data Min: 1 ~ Max: FE Acknowledgement
[r][ ][Set ID][ ][OK][Data][x]
External Control Device Setup 24. Orbiter Pixel Setting (Command2:s) G To adjust pixel number in orbiter function. Transmission
[ j ][s][ ][Set ID][ ][Data][Cr]
Data Min: 1 ~ Max: 3 Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
25. Tune Command (Command: m a) G To tune channel to following physical/major/minor number Transmission
[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][ ][Data3][ ][Data4][ ][Data5][Cr]
Data 0: Physical channel number Min: 1~ Max: 0x87 Data 1, Data 2: Major Channel Number (two part)/ Channel Number (One part) (Data 1: High, Data 2: Low) Data 3, Data 4: Minor Channel Number (Data3: High, Data4: Low) Data 5:
Main/Sub Picture Main Sub 6 0 1 7 0 1 Two/One Part Channel Two One Using Physical Channel Use No Use 5 0 1 Reserv 4 ed x x x x x x x x x x 3 2 1 0 Step 0 0 0 0 0 0 0 0 x 1 0 0 0 0 1 1 1 1 x 1 0 0 1 1 0 0 1 1 x 1 0 1 0 1 0 1 0 1 x 1 NTSC Air NTSC Cable ATSC Air ATSC Cable_std ATSC Cable_hrc ATSC Cable_irc ATSC cable_auto Reserved
... Reserved
* All data are transmitted by Hexadecimal code
*Two/One part Channel: 6th bit This bit is used in a cable-ready system.
*Using physical channel: 5th bit If the channel band is NTSC air or NTSC cable, channel tun-
ing can be done by only physical channel. In this case, using physical channel bit must be low(0). But if the channel band is ATSC air or ATSC cable, there are two cases that physical channel enable or disable. If the physical channel sending is meaningful, you should set this bit low(0). If the physical channel sending is meaningless, you should set this bit high(1). Example) 1. Analog channel: NTSC cable, channel number(35), main picture Command: ma 00 23 xx xx xx xx 01 attribute(0x01):
main picture, two part(its not mandatory), using physical chan-
nel, NTSC cable xx data: dont care major and minor channel number in case analog channel tuning. 2. Digital channel: ATSC air, channel number(dont know phys-
ical channel, major(30), minor(3)), sub picture Command: ma 00 xx 00 1E 00 03 A2 attribute(0xA2): sub pic-
ture, two part, not using physical channel, ATSC air xx data:
dont care analog channel number in case digital channel tun-
ing. 3. Digital channel: ATSC air, channel number(physical(20),major(20), minor(3)), sub picture Command: ma 00 14 00 14 00 03 82 attribute(0x82): sub pic-
ture, two part, using physical channel, ATSC air. Acknowledgement
[a][ ][Set ID][ ][OK][Data0][Data1][Data2][Data3][Data4][x]
[a][ ][Set ID][ ][NG][Data0][x]
Owners Manual 109 26. Channel Add/Del (Command: m b) G To add and delete the channels Transmission 29. PIP Input Select(Command: x y) G To adjust input source for sub picture in PIP mode Transmission
[x][y][][Set ID][][Data][Cr]
Data Structure MSB LSB 0 0 0 0 0 0 0 0 External Input Input Number External Input Data Input Number Data 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 0 DTV Analog AV Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Acknowledgement
[y][][Set ID][][OK/NG][Data][x]
0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 Input1 Input2 Input3 Input4 Input5 Input6 Input7 Input8 Input9 Input10 Input11 Input12 Input13 Input14 Input15 Input16 Note:
In case Video/S-Video is selected automatically by TV, use only single Video input. In case Video/S-Video is selected by user manually, use sepa-
rate Video/S-Video inputs.
[m][b][ ][Set ID][ ][Data][Cr]
Data 0: Channel Delete 1: Channel Add Acknowledgement
[b][ ][Set ID][ ][OK][Data][x]
[b][ ][Set ID][ ][NG][Data][x]
27. Key (Command: m c) G To send IR remote key code Transmission
[m][c][ ][Set ID][ ][Data][ ][Cr]
Data Key code: Refer to page 86. Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
28. Input select(Command: x b) (Main Picture Input) G To select input source for TV. Transmission
[x][b][][Set ID][][Data][Cr]
Data Structure MSB LSB 0 0 0 0 0 0 0 0 External Input Input Number External Input Data Input Number Data 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 Input1 Input2 Input3 Input4 Input5 Input6 Input7 Input8 Input9 Input10 Input11 Input12 Input13 Input14 Input15 Input16 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 1 1 1 1 0 0 1 1 0 0 1 1 0 0 1 0 0 1 1 0 1 0 1 0 1 0 1 0 1 1 0 1 0 1 DTV Analog AV Reserved Component RGB_DTV RGB_PC Reserved Reserved HDMI1 Reserved Reserved Reserved Reserved Reserved Acknowledgement
[b][][Set ID][][OK/NG][Data][x]
110 Plasma TV IR Codes IR Codes IR Codes How to Connect How to Connect G Connect your wired remote control to the Remote Control port on the TV. Remote Control IR Codes Remote Control IR Codes G Output waveform Single pulse, modulated with 37.917KHz signal at 455KHz TC T1 Carrier frequency FCAR = 1/TC = fOSC/12 Duty ratio = T1/TC = 1/3 G Configuration of frame 1st frame Lead code Low custom code High custom code Data code Data code C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7 Repeat frame G Lead code Repeat code Tf 9 ms 4.5 ms G Repeat code 0.55 ms G Bit description Bit 0 9 ms 0.56 ms 1.12 ms 2.25 ms Bit 1 G Frame interval : Tf The waveform is transmitted as long as a key is depressed. Tf Tf Tf=108ms @455KHz 0.56 ms 2.24 ms Owners Manual 111 IR Codes Code (Hexa) Function Note 0B 08 C4 C5 79 0E 10 ~ 19 4C 1A 09 02 03 00 01 1E AA 39 40 41 07 06 44 43 52 4D 5B 60 72 71 61 63 65 0A CB D6 5A D0 BF D4 D5 D7 C6 CC 76 77 AF 70 87 B0 BA B1 BD 8F 8E B2 B3 A9 92 C4 80 C8 7D TV/VIDEO POWER POWER ON POWER OFF RATIO TIMER Number Key 0~ 9
- (Dash) FLASHBK MUTE VOL D VOLE CH D CH E FAV INFO CC D E F G ENTER MENU EZ SOUND EZ PIC EXIT PIP PIPCH -
PIPCH +
PIP INPUT SWAP FREEZE SAP ADJUST TV VIDEO Front Video COMPONENT 1 COMPONENT 2 RGB-PC RGB-DTV HDMI1/DVI HDMI2 Ratio 4:3 Ratio 16:9 Ratio Zoom POP 1394 PLAY PAUSE STOP REC REW FF GOTOPREV GOTONEXT TV GUIDE APM MC EJECT AUTO DEMO X STUDIO MARK R/C Button R/C Button (Power On/Off) Discrete IR Code (Only Power On) Discrete IR Code (Only Power Off) R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button Discrete IR Code (TV Input Selection) Discrete IR Code (Video Input Selection) Discrete IR Code (Front Video Input Selection) Discrete IR Code (Component1 Input Selection) Discrete IR Code (Component2 Input Selection) Discrete IR Code (RGB-PC Input Selection) Discrete IR Code (RGB-DTV Input Selection) Discrete IR Code (HDMI1/DVI Input Selection) Discrete IR Code (Only 4:3 Mode) Discrete IR Code (Only 16:9 Mode) Discrete IR Code (Only Zoom1 Mode) Discrete IR Code (Channel Search) R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button 112 Plasma TV Programming Codes Programming the Remote Programming the Remote G The remote control is a multi-brand or universal remote control. It can be programmed to operate most remote-controllable devices of other manufacturers. Note that the remote control may not control all models of other brands. Programming a code into a remote mode Programming a code into a remote mode 1. Test your remote control. To find out whether your remote control can operate the component without programming, turn on the component such as a VCR and press the corresponding the desired component button on the remote control, while illuminating at the selected component. Test the POWER and CH D/E buttons to see if the component responds properly. If not, the remote requires programming to oper-
ate the device. 2. Turn on the component to be programmed, then press the corresponding the desired component button on the remote control. 3. Press the MENU and MUTE buttons simultaneously, the remote control is ready to be programmed for the code. 4. There are two ways to find the right code for the component. A. If you press the CH D/E buttons repeatedly, the codes will change one at-a-time. Press the POWER button after each code change. If the right code is found, the device will turn off. B. Enter a code number using the number buttons on the remote. Programming code numbers for the corresponding component can be found on the following pages. Again, if the code is correct, the device will turn off. 5. Press the MENU button to store the code. 6. Test the remote control functions to see if the component responds properly. If not, repeat from step 2. Owners Manual 113 Programming the Remote Brand TATUNG TEAC TECHNICS TEKNIKA THOMAS TMK TOSHIBA TOTEVISION UNITECH VECTOR RESEARCH VICTOR VIDEO CONCEPTS VIDEOSONIC WARDS YAMAHA ZENITH Codes 039 043 034 039 043 031 033 070 019 031 033 034 101 034 006 008 013 042 047 059 082 112 131 040 101 040 012 048 012 034 046 040 003 013 017 024 031 033 034 040 053 054 131 012 034 039 043 034 048 056 058 072 080 101 Brand SL MARX SPRUCER STARCOM STARGATE SYLVANIA TADIRAN TAEKWANG TAIHAN TANDY TEXSCAN TOCOM TOSHIBA UNIKA UNITED CABLE UNIVERSAL VIEWSTAR ZENITH Codes 030 047 078 002 004 008 009 008 030 067 030 110 105 017 029 067 039 040 056 100 007 014 024 004 053 005 007 014 024 026 027 032 035 012 015 018 086 087 088 089 100 114 060 093 Programming Codes Programming Codes VCRs VCRs Brand AIWA AKAI AMPRO ANAM AUDIO DYNAMICS BROKSONIC CANON CAPEHART CRAIG CURTIS MATHES DAEWOO Codes 034 016 043 046 124 125 146 072 031 033 103 012 023 039 043 035 037 129 028 031 033 108 003 040 135 031 033 041 005 007 010 064 065 108 110 111 112 116 117 119 108 012 023 039 043 034 053 059 006 017 025 027 029 031 034 035 036 037 046 101 129 131 138 153 003 008 009 010 034 031 033 063 072 107 109 144 147 GO VIDEO 132 136 HARMAN KARDON 012 045 HITACHI DAYTRON DBX DYNATECH ELECTROHOME EMERSON FISHER FUNAI GE 004 018 026 034 043 063 137 150 031 033 031 033 012 013 015 033 040 066 101 043 012 031 033 043 048 050 055 060 130 150 152 Brand KENWOOD LG (GOLDSTAR) LLOYD LXI MAGIN MAGNAVOX MARANTZ MARTA MATSUI MEI MEMOREX MGA MINOLTA MITSUBISHI MTC MULTITECH NEC NORDMENDE OPTONICA PANASONIC PENTAX PHILCO PHILIPS PILOT PIONEER Codes 014 034 039 043 047 048 001 012 013 020 101 106 114 123 034 003 009 013 014 017 034 101 106 040 031 033 034 041 067 068 012 031 033 067 069 101 027 030 031 033 003 010 014 031 033 034 053 072 101 102 134 139 045 046 059 013 020 013 020 045 046 049 051 059 061 151 034 040 024 034 012 023 039 043 048 043 053 054 066 070 074 083 133 140 145 013 020 031 033 063 031 034 067 031 033 034 054 067 071 101 101 013 021 048 Brand PORTLAND PULSAR QUARTZ QUASAR RCA REALISTIC RICO RUNCO SALORA SAMSUNG SANSUI SANYO SCOTT SEARS 010 SHARP SHINTOM SONY SOUNDESIGN STS SYLVANIA SYMPHONIC TANDY Codes 108 072 011 014 033 066 075 145 013 020 033 034 040 041 062 063 107 109 140 144 145 147 003 008 010 014 031 033 034 040 053 054 101 058 148 014 032 040 102 104 105 107 109 112 113 115 120 122 125 022 043 048 135 003 007 010 014 102 134 017 037 112 129 131 003 00 013 014 017 020 031 042 073 081 101 031 054 149 024 003 009 031 052 056 057 058 076 077 078 149 034 013 031 033 034 059 067 034 010 034 009 Codes 003 004 039 042 046 052 053 112 014 005 007 014 024 026 092 007 007 065 090 080 081 019 030 023 020 030 040 057 062 066 032 072 008 022 025 054 052 074 Brand GOLDEN CHANNEL HAMLIN HITACHI HOSPITALITY JERROLD LG (GOLDSTAR) M-NET MACOM MAGNAVOX MEMOREX MOVIE TIME NSC OAK PANASONIC PARAGON PHILIPS Codes 030 049 050 055 052 055 070 077 002 003 004 008 009 010 052 069 074 001 106 101 005 037 033 010 012 064 079 100 028 032 015 028 038 071 073 016 031 037 053 044 047 100 006 012 013 020 Brand PIONEER Codes 065 085 090 034 051 052 063 076 POST NEWS WEEK 016 059 PRUCER 011 048 071 072 PTS 073 074 100 047 049 050 057 025 091 102 107 030 068 003 011 041 042 043 045 046 022 030 052 PULSAR RCA REGAL REGENCY REMBRANT RK SAMSUNG SCIENTIFIC ATLANTA SHERITECH SIGNAL SIGNATURE INSTANTREPLAY JCL JCPENNY JENSEN JVC CACATVTV Brand ABC AJIN ANTRONIK ARCHER CABLE STAR CENTURION CENTURY CITIZEN COLOUR VOICE COMBANO COMTRONICS DIAMOND EAGLE EASTERN ELECTRICORD GE GEMINI GI 114 Plasma TV Programming Codes HDSTB HDSTB Brand Codes ALPHASTAR DSR AMPLICA BIRDVIEW BSR CAPETRONICS CHANNEL MASTER 013 014 015 018 123 050 051 126 129 053 053 CHAPARRAL CITOH CURTIS MATHES DRAKE DX ANTENNA ECHOSTAR ELECTRO HOME 036 055 008 009 012 077 054 050 145 005 006 007 010 011 052 112 116 141 024 046 056 076 038 040 057 058 093 094 095 096 097 098 099 100 122 089 Codes Brand Codes Brand Codes Brand EUROPLUS FUJITSU 114 017 021 022 027 133 134 GENERAL INSTRUMENT 003 004 016 029 HITACHI HOUSTON TRACKER HUGHES HYTEK JANIEL JERROLD KATHREIN LEGEND LG LUTRON LUXOR MACOM 031 059 101 139 140 033 037 039 051 057 104 068 053 060 147 061 108 057 001 132 062 144 010 059 063 064 065 057 028 124 125 069 070 MEMOREX NEXTWAVE NORSAT PACE SKY SATELLITE 143 060 142 PANASONIC PANSAT 121 PERSONAL CABLE 117 071 PHILIPS 105 PICO PRESIDENT 019 102 030 110 111 PRIMESTAR 072 PROSAT 066 106 RCA 043 074 REALISTIC SAMSUNG 123 SATELLITE SERVICE CO 028 035 047 057 SCIENTIFIC ATLANTA SONY 085 032 138 103 STARCAST SUPER GUIDE TEECOM TOSHIBA UNIDEN UNIDEN VIEWSTAR WINEGARD ZENITH 041 020 124 125 023 026 075 087 088 090 107 130 137 002 127 016 025 042 043 044 045 048 049 078 079 080 086 101 135 136 115 128 146 081 082 083 084 091 120 Audio Audio Brand AIWA AKAI ANAM BURMECTER CARVER CLARION DAEWOO DENON FANTASIA FINEARTS FISHER LG(GOLDSTAR) HAITAI HARMAN/KARDON 068 INKEL Codes 014 028 070 096 125 129 139 229 230 163 003 014 017 023 059 106 189 216 217 235 236 252 086 199 027 053 060 084 102 148 198 221 015 075 130 143 071 022 089 099 001 021 024 029 087 107 108 110 190 191 192 210 211 212 239 034 035 188 222 037 058 062 069 078 079 095 121 122 149 150 151 152 153 154 155 157 158 159 160 189 207 222 224 225 226 227 243 247 Brand JVC KEC KENWOOD KOHEL NAD LOTTE LXI MAGNAVOX MARANTZ MCINTOSH MCS MEMOREX NAD ONKYO OPTIMUS PANASONIC PENNEY Codes 004 013 141 185 186 187 038 050 067 089 170 171 197 206 215 222 030 045 046 014 016 036 098 100 172 173 174 175 176 177 178 179 180 181 183 201 202 208 213 214 219 223 232 238 240 103 111 002 018 020 025 034 041 081 090 097 112 049 104 107 046 013 040 041 047 048 056 057 132 133 140 158 007 033 064 113 142 220 241 251 104 Brand PHILIPS PIONEER QUASAR RCA RCX REALISTIC SAMSUNG SANSUI SANYO SCOTT SHARP SHERWOOD SONY TAEKWANG TEAC TECHNICS Codes Brand Codes TOSHIBA THE VICTOR WARDS YAMAHA 147 218 137 061 088 131 089 054 055 066 092 199 026 112 143 253 039 042 043 063 065 091 093 094 115 123 127 250 113 080 092 103 106 124 145 146 182 193 194 195 203 204 244 245 246 011 135 138 144 019 083 234 106 186 031 032 051 052 072 082 117 119 156 184 199 200 206 209 005 006 158 044 045 109 114 118 126 248 249 012 020 073 074 076 077 105 161 162 163 164 165 166 167 168 169 205 231 233 242 254 010 085 106 136 185 187 237 101 113 128 134 DVDDVD Brand Codes 022 020 014 005 006 APEX DIGITAL DENON GE HARMAN KARDON 027 012 JVC LG 001 010 016 025 Brand MAGNAVOX MARANTZ MITSUBISHI NAD ONKYO PANASONIC Codes 013 024 002 023 008 017 003 009 Brand PHILIPS PIONEER PROCEED PROSCAN RCA SAMSUNG Codes 013 004 026 021 005 006 005 006 011 015 Brand SONY THOMPSON TOSHIBA YAMAHA ZENITH Codes 007 005 006 019 008 009 018 010 016 025 Owners Manual 115 TTroubleshooting Checklist roubleshooting Checklist Troubleshooting Checklist Check whether the TV is turned on. Is the power cord inserted into wall power outlet?
No picture &
No sound Test the wall power outlet, plug another products power cord into the outlet where the TVs power cord was plugged in. Picture OK &
No sound Press the VOLUME (G) button. Sound muted? Press MUTE button. Check to see if there is any object between the TV and the remote control causing obstruction. The remote control doesnt work Are batteries installed with correct polarity (+ to +, - to -)?
(Refer to p.10) Correct remote operating mode set: TV, VCR etc.?
Install new batteries. (Refer to p.10) Picture appears slowly after switching on This is normal, the image is muted during the TV startup process. Please contact your service center, if the picture has not appeared after five minutes. Select Color in the Video menu and press the VOLUME (G) button.
(Refer to p.61) No or poor color or poor picture Keep a sufficient distance between the TV and the VCR. Activate any function to restore the brightness of the picture.
(If still picture is on the screen for more than 5 minutes, the screen gets dark.) Horizontal/vertical bars or picture shaking Check for local interference such as an electrical appliance or power tool. No output from one of the speakers Adjust Balance in the AUDIO menu. (Refer to p.63) Unusual sound from inside the TV A change in ambient humidity or temperature may result in an unusual noise when the plasma display is turned on or off and does not indicate a fault with the TV. 116 Plasma TV Maintenance Maintenance Maintenance
- Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen Cleaning the Screen 1. Heres a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until its almost dry, and then use it to wipe the screen. 2. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV. Cleaning the Cabinet Cleaning the Cabinet To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure not to use a wet cloth. Extended Absence Absence Extended If you expect to leave your TV dormant for a long time (such as a vacation), its a good idea to unplug the power cord to protect against possible damage from lightning or power surges. Owners Manual 117 Product Specifications Product Specifications Specification MODELS TU-50PY22/TU-50PY2DR-UA TU-60PY22/TU-60PY2DR-UA Width (inches / mm) Height (inches / mm) Depth (inches / mm) Weight (pounds / kg) Resolution Power requirement Television System Program Coverage External Antenna Impedance Color Operating Temperature Range Operating Humidity Range Maximum Elevation 55.2 / 1402 31.4 / 798.5 11.9 / 302.5 122 / 55.3 67.24 / 1708 36.6 / 931 12.6 / 320.7 189.2 / 85.8 1366 x 768 (Dot) AC100-240V ~ 60Hz NTSC-M, ATSC VHF 2 ~ 13, UHF 14 ~ 69, CATV 1 ~ 135, CADTV 1 ~ 135. DTV 2 ~ 69 75 16,770,000 (256 steps of each R, G and B) 32 ~ 104F (0 ~ 40C) Less than 80%
6561 feet (2000m) The specifications shown above may be changed without prior notice for quality improvement. 118 Plasma TV LG ELECTRONICS, INC. PLASMA TV U.S. LIMITED WARRANTY Your LG Plasma TV will be repaired or replaced in accordance with the terms of this warranty, at LGEs option, if it proves to be defective in material or workmanship under normal use, during the warranty period (Warranty Period) listed below, effective from the date (Date of Purchase) of original consumer purchase of the product. This war-
ranty is good only to the original purchaser of the product and effective only when used in the United States, includ-
ing Alaska, Hawaii, and U.S. Territories. WARRANTY PERIOD:
HOW SERVICE IS HANDLED:
LABOR and PARTS: 2 YEARS from the Date of Purchase. Your unit will be repaired or replaced with a new, substitute model or factory reconditioned unit, at LGEs option. If repaired, parts used in the repair may be new or remanufac-
tured. Replacement Units and Repair Parts are warranted for the remaining portion of the original units warranty period. EFFECTIVE DATE OF WARRANTY: Your warranty period begins on the date of sale to the original consumer/end user. KEEP THE DEALERS DATED BILL OF SALE OR PROOF OF DELIVERY as evidence of the purchase date. You will be required to submit a legible copy of your bill of sale or proof of delivery when requesting warranty service. In-Home Service: Please retain dealers dated bill of sale or delivery ticket as evidence of the Date of Purchase for proof of warranty, and submit a copy of the bill of sale to the ser-
vice person at the time warranty service is pro-
vided. Please call 1-201-816-2000 to locate your nearest LGE Authorized Service Center. Visit our website at:
http://www.lgservice.com THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. NEITHER THE MANUFACTURER NOR ITS U.S. DISTRIBUTOR SHALL BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY NATURE, INCLUDING WITHOUT LIMITATION, LOST PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights that vary from state to state. CONCERNING PIXEL FUNCTIONALITY: Your Plasma TV contains about one million individual pixels. Plasma TV typically contain a small number of pixels that do not function normally. Your display has been inspected and is in compliance with manufacturers specifications, indicating that any pixel defects do not effect the operation or use of your display. IMPORTANT: Please fill out and mail in your Product Registration Card or go to www.lgservice.com to register your product online. This information will allow us to reach you promptly should we discover a safety or reliability prob-
lem that could affect you. THIS LIMITED WARRANTY DOES NOT APPLY TO:
G damage caused in shipping or transit G service required as a result of improper installation, including incorrect or insufficient AC supply (please consult the owners manual for power supply requirements) G installation or repair of antenna systems, cable con-
verters, cable company supplied equipment, or other components in a video system gence, improper maintenance or storage, or to acts of nature or other causes beyond our control.
(Causes beyond our control include but are not lim-
ited to lightning strike, power surges, power out-
ages and water damage.) G image burn-in G repair or replacement of warranted parts by other than LGE authorized service centers. G set-up or adjustment on consumer controls, or G units purchased or serviced outside of the coverage damage caused by improper adjustments area. G damage caused by other system components G any panel that has been modified or incorporated into any other product G replacement of batteries on the remote control. G damage (including cosmetic damage), failure, loss or personal injury due to misuse, abuse, negli-
G product where the original factory serial numbers have been removed, defaced or changed in any way. G product sold and labeled as as is, where is or sim-
ilar disclaimer. The cost of repair or replacement under these excluded circumstances shall be borne by the consumer. CUSTOMER INTERACTIVE CENTER NUMBERS:
To obtain customer assistance, product information or Dealer or Service locations Call 1-201-816-2000 24 hours a day, 365 days per year FOR SERVICE:
Before you call for warranty service, check your operating guide you may avoid a service call. For warranty service information, please contact the LGE Customer Interactive Center telephone number. When calling for service, please have your product model number, serial number and the date of pur-
chase or the date of original installation available. If a replacement unit is required, under some circumstances you may be asked to provide a reserve deposit to the LGE Service Center against a credit card number as surety for advanced shipment. Your credit card will not be charged if you return the defective unit within 10 working days. If a replacement unit is received, please use the carton and packaging from that unit in returning the defective unit to the LGBrand Service Center. Parts and service in accordance with the LGE warranty are LGEs responsibility and will be provided without charge. Other service requirements will be at the owners expense. If you have problems in obtaining satisfactory warranty service, write or call the LGE Customer Interactive Center. Service may be provided by independently owned and operated service organizations. To assure proper credit and avoid unnecessary charges, you must obtain an LGE Return Authorization before returning any product to the LGE Service Center. Contact the Customer Interactive Center for details. TO CONTACT THE LGE CUSTOMER SERVICE CENTER BY MAIL:
LGE Customer Interactive Center P.O. Box 240007 201 James Record Road Huntsville, Alabama 35824 http://www.lgservice.com P/NO : 3828VA0528A
This product uses the FCC Data API but is not endorsed or certified by the FCC