| submitted | available | document details (if available) | source link |
|---|---|---|---|
| December 06 2008 | Zenith.book Kenny.Hu Acrobat Distiller 6.0 (Windows) |
| various | User Manual 2 | Users Manual | 5.64 MiB | December 06 2008 |
Zenith.book Page 39 Wednesday, April 2, 2008 11:46 AM KEY LOCK The TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off. Press the MENU button and then use to select the OPTION menu. or button Press the select Key Lock. button and then use or button to Press the select On or Off. button and then use or button to Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. Language Input Label Key Lock Caption Set ID
: English
: Off
: Off
: 1 Language Input Label Key Lock Caption Set ID Off On I W A T C H N G T V
/
C H A N N E L C O N T R O L 39 Zenith.book Page 40 Wednesday, April 2, 2008 11:46 AM PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV.
RGB-PC input source use 4:3 or 16:9 aspect ratio. NOTE
!
If a fixed image is displayed on the screen for a long time, the image could become imprinted on the screen and remain visible. This phenomenon is common to all manufacturers and is not covered by warranty. Although, after watching video that did not fill the screen, any afterimage from the black bars will normally dissipate after a few minutes. I P C T U R E C O N T R O L Press the RATIO button repeatedly to select the desired picture format.
You can also adjust Aspect Ratio in the PICTURE menu. Set by program Selects the proper picture proportion to match the sources image.
(4:3 4:3)
(16:9 16:9) Zoom 1 Set by program Set by program 4:3 Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio. Zoom 2 Choose Zoom 2 when you want the picture to be altered, both vertically extended and cropped. The picture taking a halfway trade off between alteration and screen coverage. 4:3 16:9 Adjust the picture horizontally, in a linear pro-portion to fill the entire screen. Set By Program 16:9 Zoom 1 Choose Zoom 1 when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped. 40 Zoom 2 Just Scan Following selection will lead you to view the picture of best quality without loss of original picture in high resolution image. Notes:If there are noise in original picture, you can see the noise at the edge. Just Scan operates only in DTV/CADTV
(720p/1080i/1080p), HDMI-DTV, DVI-DTV input source. Just Scan Zenith.book Page 41 Wednesday, April 2, 2008 11:46 AM PRESET PICTURE SETTINGS Picture Mode - Preset There are factory presets for picture settings available in the user menus. You can use a preset, change each setting manually, or use the Intelligent Sensor. Dynamic, Standard, Mild Settings are preset for the optimum picture quality at the factory and are not adjustable. In the User1 and User2 modes only, user can directly adjust the contrast, brightness, color, sharpness, tint, backlight. Press the PICTURE button repeatedly to select the picture appearance setup option as below :
Dynamic, Standard, Mild, User1 (your own settings), and User2 (your own settings). Press the RETURN button to save and return to TV viewing.
You can also use the PICTURE menu to adjust Picture Mode. I P C T U R E C O N T R O L Picture Mode Color Temperature
: User1
: Cool DB Advanced Aspect Ratio Picture Reset Screen
: 16:9 Picture Mode Color Temperature DB Advanced Aspect Ratio Picture Reset Screen Dynamic Standard Mild User1 User2 41 Zenith.book Page 42 Wednesday, April 2, 2008 11:46 AM PICTURE CONTROL Color Tone - Preset Choose one of three automatic color adjustments. Set to Warm to enhance hotter colors such as red, or set to Cool to see less intense colors with more blue. When selecting Picture Mode options (Dynamic, Standard and Mild), Color Temperature is automatically changed. When selecting Picture Mode options (User1 and User2), you can choose the Color Temperature. Press the MENU button and then use to select the PICTURE menu. or button Press the select Color Temperature. button and then use or button to Press the select either Cool, Medium, Warm or User. button and then use or button to I P C T U R E C O N T R O L Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. 42 Picture Mode Color Temperature
: User1
: Cool DB Advanced Aspect Ratio Picture Reset Screen
: 16:9 Picture Mode Color Temperature DB Advanced Aspect Ratio Picture Reset Screen Cool Medium Warm User Zenith.book Page 43 Wednesday, April 2, 2008 11:46 AM MANUAL PICTURE ADJUSTMENT Picture Mode - User Mode Adjust the picture appearance to suit your preference and viewing situations. Press the MENU button and then use to select the PICTURE menu. or button Press the select Picture Mode. button and then use or button to Press the select User1 or User2. button and then use or button to button and then use or the desired picture option Press the select Brightness, Color, Sharpness, Tint, or Back Light). button to
(Contrast,
Back Light To control the brightness of the screen, adjust the brightness of LCD panel. Press the make appropriate adjustments. button and then use or button to Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. Picture Mode Color Temperature
: User1
: Cool DB Advanced Aspect Ratio Picture Reset Screen
: 16:9 Picture Mode Color Temperature DB Advanced Aspect Ratio Picture Reset Screen Dynamic Standard Mild User1 User2 Selection ( or
) leads you to the detailed setting screen. User1 Contrast Brightness Color Sharpness Tint 85 50 50 50 0 Back Light 100 Press MENU to confirm. Contrast 85 I P C T U R E C O N T R O L 43 Zenith.book Page 44 Wednesday, April 2, 2008 11:46 AM PICTURE CONTROL Color Tone - User Mode You can also adjust the detailed settings (Red, Green, Blue) by selecting the Color Temperature-User menu. When selecting Picture Mode options (User1 and User2), you can choose the Color Temperature. Press the MENU button and then use to select the PICTURE menu. or button Press the select Color Temperature. button and then use or button to Press the select User. button and then use or button to Press the select Red, Green, or Blue. button and then use or button to Press the appropriate adjustments. button and then use or button to make
The adjustment range of Red, Green, or Blue is
-20~ +20. Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. Picture Mode Color Temperature
: User1
: Cool DB Advanced Aspect Ratio Picture Reset Screen
: 16:9 Picture Mode Color Temperature DB Advanced Aspect Ratio Picture Reset Screen Cool Medium Warm User Selection ( or
) leads you to the detailed setting screen. User Red Green Blue 0 0 0 Press MENU to confirm. Red 0 I P C T U R E C O N T R O L 44 Zenith.book Page 45 Wednesday, April 2, 2008 11:46 AM DB - PICTURE IMPROVEMENT TECHNOLOGY DB is Zeniths unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. When selecting Picture Mode options (Dynamic, Standard, and Mild), DB is automatically changed to Auto. When selecting Picture Mode options (User1 and User2), you can choose the Auto / Manual. When selecting the Manual, you can adjust the DB Contrast, DB Color and DB Noise. Its not available to use this function in RGB-PC input source. Press the MENU button and then use to select the PICTURE menu. or button Press the select DB. button and then use or button to Press the select either Auto or Manual. button and then use or button to Selecting the Manual 1. Press the button and then use or button to select DB Contrast, DB Color or DB Noise.
DB Contrast: Optimizing the contrast automatically according to the brightness of the reflection.
DB Color: Adjusting the colors of the reflection automatically to reproduce as closely as possible to the natural colors.
DB Noise: Removing the noise up to the point where it does not damage the original picture. 2. Use the or button to select On or Off. Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. Picture Mode Color Temperature
: User1
: Cool DB Advanced Aspect Ratio Picture Reset Screen
: 16:9 Picture Mode Color Temperature DB Advanced Aspect Ratio Picture Reset Screen Manual DB Contrast DB Color DB Noise On On On I P C T U R E C O N T R O L 45 Zenith.book Page 46 Wednesday, April 2, 2008 11:46 AM PICTURE CONTROL ADVANCED - CINEMA 3:2 PULL DOWN MODE Set up the TV for the best picture appearance for viewing movies. When you operate Cinema 3:2 Mode (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will adjust 24 fps video from movies to 30 fps video for display. This feature operates only in TV (Analog TV/CATV, Digital DTV/CADTV), AV1, AV2, Component 480i/1080i, and HDMI 1080i mode. Press the MENU button and then use to select the PICTURE menu. or button Press the select Advanced. button and then use or button to Press the select Cinema 3:2 Mode. button and then use or button to Use or button to select On or Off. Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. Picture Mode Color Temperature
: User1
: Cool DB Advanced Aspect Ratio Picture Reset Screen
: 16:9 Picture Mode Color Temperature DB Advanced Aspect Ratio Picture Reset Screen Cinema 3:2 Mode Off Black Level Low I P C T U R E C O N T R O L 46 Zenith.book Page 47 Wednesday, April 2, 2008 11:46 AM ADVANCED - BLACK (DARKNESS) LEVEL Adjusting the contrast and the brightness of the screen using the black level of the screen. This feature operates only in AV 1, AV 2, HDMI1, or HDMI2 mode. Press the MENU button and then use to select the PICTURE menu. or button Press the select Advanced. button and then use or button to Press the select Black Level. button and then use or button to Use or button to select Low or High.
Low The screen gets darker.
High The screen gets brighter. Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. Picture Mode Color Temperature
: User1
: Cool DB Advanced Aspect Ratio Picture Reset Screen
: 16:9 Picture Mode Color Temperature DB Advanced Aspect Ratio Picture Reset Screen Cinema 3:2 Mode Off Black Level Low I P C T U R E C O N T R O L 47 Zenith.book Page 48 Wednesday, April 2, 2008 11:46 AM PICTURE CONTROL PICTURE RESET Use to quickly reset all the Picture menu options to their original factory preset values. Press the MENU button and then use to select the PICTURE menu. or button Press the select Picture Reset. button and then use or button to Press the options to original values. button to reset the PICTURE menu Picture Mode Color Temperature
: User1
: Cool DB Advanced Aspect Ratio Picture Reset Screen
: 16:9 Picture Mode Color Temperature DB Advanced Aspect Ratio Picture Reset Screen Selection ( or
) resets to the factory settings(defaults). I P C T U R E C O N T R O L 48 Zenith.book Page 49 Wednesday, April 2, 2008 11:46 AM SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER (AUTO VOLUME) Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. Press the MENU button and then use to select the AUDIO menu. or button Sound Mode Auto Volume Balance TV Speaker
: Standard
: On
: 0
: On Press the select Auto Volume. button and then use or button to Press the select On or Off. button and then use or button to Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. Sound Mode Auto Volume Balance TV Speaker Off On S O U N D
&
L A N G U A G E C O N T R O L 49 Zenith.book Page 50 Wednesday, April 2, 2008 11:46 AM SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS (SOUND MODE) Sound Mode lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound options based on the program content. Standard, Music, Movie, and Sports are preset for good sound quality at the factory and are not adjustable. Press the SOUND button repeatedly to select the appropriate sound setup as below:
Standard, Music, Movie, Sports, and User (your own settings). Press RETURN button to return to TV viewing.
You can also adjust Sound Mode in the AUDIO menu. Sound Mode Auto Volume Balance TV Speaker
: Standard
: On
: 0
: On Sound Mode Auto Volume Balance TV Speaker Standard Music Movie Sports User S O U N D
&
L A N G U A G E C O N T R O L 50 Zenith.book Page 51 Wednesday, April 2, 2008 11:46 AM SOUND SETTING ADJUSTMENT - USER MODE Adjust the sound to suit your taste and room situations. Press the MENU button and then use to select the AUDIO menu. or button Sound Mode Auto Volume Balance TV Speaker
: Standard
: On
: 0
: On Press the select Sound Mode. button and then use or button to Press the select User. button and then use or button to button and then use Press the button to select the desired sound option (Treble, Bass, or Front Surround). or Press the appropriate adjustments. button and then use or button to make Selecting the Front Surround Press the button to select Off, 3D EchoSound System or SRS (Sound Retrieval System) TruSurround XT. button and then use or Sound Mode Auto Volume Balance TV Speaker Standard Music Movie Sports User
) leads you Selection ( or to the detailed setting screen. User Treble Bass 50 50 Front Surround Off S O U N D
&
L A N G U A G E C O N T R O L Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. Press MENU to confirm. SRS TruSurround XT Takes advantage of any multi-channel format without needing to add extra speakers or equipment. Dialog clarity, bass enrichment, and the addition of stereo audio enhancement produces an immersive sound experience from standard stereo material. 3D EchoSound System Creates a stunning simulated stereo effect from any mono sound and a realistic three-dimensional sound with a very wide and deep sound stage. Front Surround 3D EchoSound System 51 Zenith.book Page 52 Wednesday, April 2, 2008 11:46 AM SOUND & LANGUAGE CONTROL BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. Press the MENU button and then use to select the AUDIO menu. or button Sound Mode Auto Volume Balance TV Speaker
: Standard
: On
: 0
: On Press the select Balance. button and then use or button to Press the appropriate adjustments. button and then use or button to make Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. Sound Mode Auto Volume Balance TV Speaker 0 Balance 0 S O U N D
&
L A N G U A G E C O N T R O L 52 Zenith.book Page 53 Wednesday, April 2, 2008 11:46 AM TV SPEAKERS ON/OFF SETUP Turn the TV speakers off if using external audio equipment. Press the MENU button and then use to select the AUDIO menu. or button Sound Mode Auto Volume Balance TV Speaker
: Standard
: On
: 0
: On Press the select TV Speaker. button and then use or button to Press the select On or Off. button and then use or button to Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. Sound Mode Auto Volume Balance TV Speaker Off On S O U N D
&
L A N G U A G E C O N T R O L 53 Zenith.book Page 54 Wednesday, April 2, 2008 11:46 AM SOUND & LANGUAGE CONTROL STEREO/SAP BROADCASTS SETUP For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used if the broadcast is only in Mono. Use the SAP button to select your desired MTS mode in analog signal. Each time you press the SAP button, Mono, Stereo, or SAP appear in turn.
If other languages available on the digital signal, select them with the SAP button. Press RETURN button to save and return to TV viewing. S O U N D
&
L A N G U A G E C O N T R O L 54 Zenith.book Page 55 Wednesday, April 2, 2008 11:46 AM AUDIO LANGUAGE Other languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV/CADTV mode. Press the MENU button and then use to select the OPTION menu. or button Press the select Language. button and then use or button to Press the select Audio. button and then use or button to or Use French. button to select: English , Spanish, or Press RETURN button to return to TV viewing or press MENU button to return to the previous menu.
: English
: Off
: Off
: Off
: Orbiter
: Off
: 1 Menu Audio English English Menu Audio English English Language Input Label Key Lock Caption Set ID Language Input Label Key Lock Caption Set ID Language Input Label Key Lock Caption Set ID S O U N D
&
L A N G U A G E C O N T R O L 55 Zenith.book Page 56 Wednesday, April 2, 2008 11:46 AM SOUND & LANGUAGE CONTROL ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. First select your language. Press the MENU button and then use to select the OPTION menu. or button Press the select Language. button and then use or button to Press the select Menu. button and then use or button to or Use button to select your desired language. From this point on, the on-screen menus will be shown in the selected language. Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. Language Input Label Key Lock Caption Set ID
: English
: Off
: Off
: 1 Language Input Label Key Lock Caption Set ID Language Input Label Key Lock Caption Set ID Menu Audio English English Menu Audio English English S O U N D
&
L A N G U A G E C O N T R O L 56 Zenith.book Page 57 Wednesday, April 2, 2008 11:46 AM CAPTION MODE Caption must be provided to help people with hearing loss watch TV. Use the CC button to select Caption On or Off.
When selecting Off, Sub-menus for Analog, Digital, and Digital Option become disabled. Press RETURN to save and return to TV viewing.
You can also adjust Caption in the OPTION menu. Language Input Label Key Lock Caption Set ID
: English
: Off
: Off
: 1 Language Input Label Key Lock Caption Set ID Mode On Analog Text1 Digital Service3 Digital Option S O U N D
&
L A N G U A G E C O N T R O L 57 Zenith.book Page 58 Wednesday, April 2, 2008 11:46 AM SOUND & LANGUAGE CONTROL Analog Broadcasting System Captions Caption must be provided to help people with hearing loss watch TV. Select a caption mode for displaying captioning information if provided on a program. Analog caption displays information at any position on the screen and is usually the program's dialog. Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable. This TV is programmed to memorize the caption/text mode which was last set when you turned the power off. This function is only available when Caption Mode is set On. Press the MENU button and then use to select the OPTION menu. or button Press the select Caption. button and then use or button to Press the select Analog. button and then use or button to or Use Text1, Text2, Text3 or Text4. button to select CC1, CC2, CC3, CC4, S O U N D
&
L A N G U A G E C O N T R O L
CAPTION The term for the words that scroll across the bottom of the TV screen; usually the audio portion of the program provided for the hearing impaired.
TEXT The term for the words that appear in a large black frame and almost cover the entire screen; usually messages provided by the broadcaster. Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. 58 Language Input Label Key Lock Caption Set ID
: English
: Off
: Off
: 1 Language Input Label Key Lock Caption Set ID Mode Analog Digital On Text1 Service3 Digital Option
This product uses the FCC Data API but is not endorsed or certified by the FCC