LG . This part should not contain any hazardous substances which are specified in LG Eco-Standard. APPROVAL Arcadyan Part No : WN7111BW-HF-19 LGE Part No : EBR858719 Model Name : LCW-008 Date
: 2019. 09. 26
(APPROVED BY) Drawn by Checked by Issued by JH Park KJ Hwang Bill Chang 2019. 09. 26. Please return 1 copy after your receipt. Arcadyan Technology Corporation No.8, Sec.2, Guangfu Rd.,Hsinchu City 30071, Taiwan, R.O.C. TEL : 886-3-578-7000 FAX : 886-3-563-7326 REG. DATE : 2019.09.26 S P E C I F I C A T I O N REV.NO : 2.0 REV. DATE : 2019.09.26 MODEL NAME : LCW-008 7. Electrical Specifications 1. Introduction WN7111BW-HF-19 is IEEE 802.11n compliant while maintaining full backwards Compatibility with the IEEE802.11b and 802.11g standards. It utilizes advanced SISO
(Single Input Single Output) technology to deliver incredible Speed and range. The wireless Network adapter provide better performance than existing 802.11g technology. Upgrading to wireless 11n network provides an excellent solution for Sharing an Internet connection and file such as video, music, photos and documents. WN7111BW-HF-19 is based on Realtek RTL8711AM solution. IEEE 802.11 b/g/n_HT20_HT40 compliant Wireless speed up to 150Mbps Size : 48.0mm x 20.0mm x 11.4 mm Antenna type : PCB Printed antenna Host Interface : UART RoHS Compliant 2. Ordering Information Model WN7111BW-HF-19 LCW-008 3. Hardware Description Description 802.11 b/g/n_HT20_HT40 Single Band 1T1R The WN7111BW-HF-19 adapter provides 150Mbps connections. It is fully compliant with the specification of the IEEE802.11b/g/n standards. Top view Bottom view Copyright. 2016. All Rights Reserved. REG. DATE : 2019.09.26 S P E C I F I C A T I O N REV.NO : 2.0 MODEL NAME : LCW-008 REV. DATE : 2019.09.26 4. Block Diagram 5. Absolute Maximum Ratings Caution : The specifications in Table 1 define levels at which permanent damage to the device can occur. Function operation is not guaranteed under these conditions. Operating at absolute maximum conditions for extend periods can adversely affect the long-term reliability of the device. Parameter Storage Temperature Storage Humidity (40)
. Other conditions Min
-20
< Table 1 >
Max
+80 90 Unit
1) Do not use or store modules in the corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are contained. Also, avoid exposure to moisture. 2) Store the modules where the temperature and relative humidity do not exceed 5 to 40 and 20 to 60%. 3) Assemble the modules within 6 months. Check the soldering ability in case of 6 months over. Copyright. 2016. All Rights Reserved. REG. DATE : 2019.09.26 S P E C I F I C A T I O N REV.NO : 2.0 REV. DATE : 2019.09.26 MODEL NAME : LCW-008 6. Operating Conditions Parameter Min Typ Max Ambient Temperature Ambient Humidity (40) Supply Voltage Supply Voltage 0
4.5 10.8
5 60 85 5.5 12 13.2 Unit
Vdc Vdc 7. Standard Test Conditions The Test for electrical specification shall be performed under the following condition Otherwise this following conditions, not guaranteed this performance. 7-1. Ambient condition 7-2. Power supply voltages Temperature Humidity Input power VDD_5V VDD_12V 25 5 65 5%
Supply Voltage 4.5 ~ 5.5V 10.8 ~ 13.2V 7-3. Current consumption Current Consumption Min. Typ. Max. TX Mode RX Mode (MCS7 HT20) Note 1 : This figure is the RMS(root mean square) Value. Current Consumption TX Mode Note 2 : This figure is the Peak Value. 7-4. ESD Information
Min. 220 60 Typ. 280 270 100 Max. 450 Human Body Model (HBM) Min. Max. 2 10
Contact Air Note 1 : IEC 61000-4-2 (150pF, 330R) Copyright. 2016. All Rights Reserved. Unit mA Unit mA Unit kV REG. DATE : 2019.09.26 S P E C I F I C A T I O N REV.NO : 2.0 REV. DATE : 2019.09.26 MODEL NAME : LCW-008 9. Pin Description Pin No. Pin Name I/O Pin Description 1 2 3 4 5 6 VDD UART RX N.C N.C GND I I
I Power Supply 5V or 12V UART Serial Input Not connected Not connected Ground UART TX O UART Serial Output Copyright. 2016. All Rights Reserved. REV. DATE : 2019.09.26 S P E C I F I C A T I O N REV.NO : 2.0 REV. DATE : 2019.09.26 MODEL NAME : LCW-008 10. Mechanical Characteristics 1) Outline view Item Test Conditions Assembly No defects of wiring, soldering and assembling Appearance No dirt, rust, corrosion or foreign material 2) Appearance structure Item Test Conditions Dimension As assembly drawing Mounting As assembly drawing Weight 4.5g Copyright. 2016. All Rights Reserved. REV. DATE : 2019.09.26 S P E C I F I C A T I O N REV.NO : 2.0 REV. DATE : 2019.09.26 MODEL NAME : LCW-008 FCC/ISED statement
<FCC Rule 15.19>
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
<FCC Rule 15.105>
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
<FCC Rule 15.21>
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment..
*OEM integrators should provide the statement <FCC Rule 15.19> and <FCC Rule 15.21> to end users in their end-product manuals. Copyright. 2016. All Rights Reserved. REV. DATE : 2019.09.26 S P E C I F I C A T I O N REV.NO : 2.0 REV. DATE : 2019.09.26 MODEL NAME : LCW-008 Regulatory notice to host manufacturer according to KDB 996369 D03 OEM Manual>
List of applicable FCC rules This module has been granted modular approval as below listed FCC rule parts.
- FCC Rule parts 15C(15.247) Summarize the specific operational use conditions The OEM integrator should use equivalent antennas which is the same type and equal or less gain then an antenna listed in this instruction manual. RF exposure considerations The module has been certified for integration into products only by OEM integrators under the following condition:
- The antenna(s) must be installed such that a minimum separation distance of at least 20 cm is maintained between the radiator (antenna) and all persons at all times.
- The transmitter module must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures.
- Mobile use As long as the three conditions above are met, further transmitter testing will not be required. OEM integrators should provide the minimum separation distance to end users in their end-product manuals. Antennas list This module is certified with the following integrated antenna.
- Type: PCB Printed Antenna (Peak gain (dBi): 2.5 dBi) Any new antenna type, higher gain than listed antenna should be met the requirements of FCC rule 15.203 and 2.1043 as permissive change procedure. Label and compliance information End Product Labeling The module is labeled with its own FCC ID and IC Certification Number. If the FCC ID and IC Certification Number are not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. In that case, the final end product must be labeled in a visible area with the following:
Contains FCC ID: BEJ-LCW008 Contains IC: 2703N-LCW008 Information on test modes and additional testing requirements OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, additional transmitter in the host, etc.). Additional testing, Part 15 Subpart B disclaimer The final host product also requires Part 15 subpart B compliance testing with the modular transmitter installed to be properly authorized for operation as a Part 15 digital device. Copyright. 2016. All Rights Reserved. REV. DATE : 2019.09.26 S P E C I F I C A T I O N REV.NO : 2.0 REV. DATE : 2019.09.26 MODEL NAME : LCW-008 tiquetage du produit final (IC) Le module LCW-008 est tiquet avec sa propre identification FCC et son propre numro de certification IC. Si lidentification FCC et le numro de certification IC ne sont pas visibles lorsque le module est install lintrieur dun autre dispositif, la partie externe du dispositif dans lequel le module est install devra galement prsenter une tiquette faisant rfrence au module inclus. Dans ce cas, le produit final devra tre tiquet sur une zone visible avec les informations suivantes :
- Contient module metteur identification FCC ID: BEJ-LCW008
- Contient module metteur IC : 2703N-LCW008 This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the antenna and your body. Lantenne (ou les antennes) doit tre installe de faon maintenir tout instant une distance minimum de au moins 20 cm entre la source de radiation (lantenne) et toute personne physique. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIPMENT. NOTA: EL FABRICANTE NO ES RESPONSABLE DE NINGUNA INTERFERENCIA DE RADIO O TV CAUSADA POR MODIFICACIONES NO AUTORIZADAS A ESTE EQUIPO. DICHAS MODIFICACIONES PODRAN ANULAR LA AUTORIDAD DEL USUARIO PARA OPERAR EL EQUIPO. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) lappareil ne doit pas produire de brouillage, et
(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Copyright. 2016. All Rights Reserved.