all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
users manual | Users Manual | 1.86 MiB | July 07 2003 / March 07 2003 | |||
1 | Cover Letter(s) | July 07 2003 / March 07 2003 | ||||||
1 | Cover Letter(s) | July 07 2003 / March 07 2003 | ||||||
1 | External Photos | July 07 2003 / March 07 2003 | ||||||
1 | Internal Photos | July 07 2003 / March 07 2003 | ||||||
1 | ID Label/Location Info | July 07 2003 / March 07 2003 | ||||||
1 | ID Label/Location Info | July 07 2003 / March 07 2003 | ||||||
1 | Test Report | July 07 2003 / March 07 2003 | ||||||
1 | Test Setup Photos | July 07 2003 / March 07 2003 |
1 | users manual | Users Manual | 1.86 MiB | July 07 2003 / March 07 2003 |
Installation and Operating Guide | Warranty Model Number | XBS344 | DVD/CD/VCR Receiver Home Theater System Copyright 2003, Zenith Electronics Corporation Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: TO REDUCE THE RISK OF FIRE OR ELEC-
TRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR VITER LES CHOC LECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQUAU FOND. WARNING: Do not install this equipment in a confined space such as a bookcase or similar unit. NOTE TO CABLE/TV INSTALLER: This reminder is provided to call the cable TV system installers attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. CAUTION:
This DVD/CD/VCR Receiver employs a Laser System. To ensure proper use of this product, please read this owners manual carefully and retain for future reference. Should the unit require maintenance, contact an authorized service location. Use of controls, adjustments, or the performance of proce-
dures other than those specified herein may result in haz-
ardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. 2 CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifi-
cations are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. REGULATORY INFORMATION: FCC Part 15 This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the product is operated in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the product and receiver.
Connect the product into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. FCC COMPLIANCE: The responsible party for this products compliance is:
Zenith Electronics Corporation, 2000 Millbrook Drive, Lincolnshire, IL 60069, USA Phone: 1-847-941-8000. NOTES ON COPYRIGHTS:
It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs on a VCR, picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection tech-
nology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. SERIAL NUMBER: The serial number is found on the back of this unit. This number is unique to this unit and not available to others. You should record requested information here and retain this guide as a permanent record of your purchase. Model No. ___________________________________ Serial No. ___________________________________ I N O T C U D O R T N I IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNERS MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following proce-
dures for installation, use, and servicing. This product does not contain any parts that can be repaired by the user. DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the product. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with apparatus. When a cart is used, use caution when moving the cart/product combination to avoid injury from tip-over. 13. Unplug this product during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the product has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the product, the product has been exposed to rain or moisture, does not operate normally, or has been dropped. 1. Read these instructions. - All these safety and oper-
ating instructions should be read before the product is operated. 2. Keep these instructions. - The safety, operating and use instructions should be retained for future refer-
ence. 3. Heed all warnings. - All warnings on the product and in the operating instructions should be adhered to. 4. Follow all instructions. - All operating and use instructions should be followed. 5. Do not use this product near water. For example:
near a bath tub, wash bowl, kitchen sink, laundry tub, in a wet basement; or near a swimming pool; and other areas located near water. 6. Clean only with dry cloth. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners. 7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. -
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over-heating. The open-
ings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This prod-
uct should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is pro-
vided or the manufacturers instructions have been adhered to. 8. Do not install near any heat sources such as radi-
ators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A ground-
ing type plug has two blades and a third ground-
ing prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 3 Table of Contents Introduction Safety Precautions. 2 IMPORTANT SAFETY INSTRUCTIONS . 3 Table of Contents. 4 Before Use . 5-6 Playable Discs . 5 Precautions . 6 Notes on Discs. 6 About Symbols. 6 Front Panel. 7 Display Window . 8 Remote Control . 9 Rear Panel . 10 Preparation Connections . 11-14 Connecting Antenna/Cable TV to a DVD/CD/VCR Receiver . 11 Basic TV Connections . 12 Optional TV Connections . 12 Speaker System Connections. 13 Speaker Positioning . 13 Radio Antenna Connections . 14 Accessory Audio/Video (A/V) Connections to DVD/CD/VCR Receiver . 14 Digital Device Connections. 14 Selecting the Input Source . 15 Before Operation - Sound Mode Descriptions. 16-18 Mini Glossary for Audio Stream & Surround Mode . 16 Sound Mode . 16 VCR Operation Setup . 17-19 On-Screen Display(OSD) . 17 On-Screen Menus Setup . 17 Using the VCR Setup Menu . 18 Channel Selection . 18 Setting the Clock . 19 DVD Operation Setup . 20-22 General Explanation. 20 On-Screen Display . 20 Initial Settings . 21-22
General Operation . 21
Language . 21
Picture . 21
Progressive Scan. 21
Speaker Setup . 22
Others(DRC/Vocal/PBC/AutoPlay) . 22
Parental Control. 23 Operation VCR Operation . 24-28 Normal Playback . 24 Special Effect Playbacks . 24
Search. 24
Still Picture and Frame-by-Frame Playback . 24
Slow Motion . 24
CM SKIP (Commercial Skip) . 24
EZ(EASY) Review . 24 Normal Recording . 25 Timer Recording . 25-26 Instant Timer Recording . 27 Dubbing and Editing. 27 Copying from DVD to VCR . 27 VHS Hi-Fi Stereo System/MTS Broadcast . 28 Tape Counter Memory Feature . 29 Additional Information. 29 DVD Operation . 30-31 Playing DVD . 30 General Features . 30-32
Selecting Other TITLEs . 30
Selecting Other CHAPTERs/TRACKs. 30
Slow Motion . 30
Still Picture and Frame-by-Frame Playback . 30 4
Search. 31
Random. 31
Repeat. 31
Repeat A-B . 31
Time Search . 31
3D Surround . 31
Zoom . 31
Marker Search . 32
Changing Video Mode . 32 Special DVD Features . 32
Checking the contents of DVD Video discs: Menus . 32
Title Menu . 32
Disc Menu . 32
Camera Angle . 32
Changing the Audio Language . 32
Subtitle . 32
Screen Saver. 32 Audio CD and MP3/WMA Disc Operation . 33 Playing Audio CDs and MP3/WMA Discs . 33 MP3/WMA Recording Notes . 33
Pause . 34
Selecting another Tracks . 34
Repeat Track/ All/ Off. 34
Search. 34
Random . 34
Repeat A-B . 34
3D Surround . 34
Changing the Audio Channel . 34 JPEG File Operation . 35 Viewing JPEG Files on a Disc . 35
Selecting other Files . 35
Still Picture . 35
To flip the picture . 35
To rotate picture. 35 Notes on JPEG Files . 35 Programmed Playback. 36 Programmed Playback with Audio CDs and MP3/WMA Discs . 36 Programmed Playback with Video CDs . 36
Repeat Programmed Tracks . 36
Erasing a Track from Program List . 36
Erasing the whole Program List . 36 Speaker Setup . 37 Radio Operation. 38 Presetting the Radio Stations . 38 Listening to the Radio . 38 To Clear the Stored Radio Stations. 38 Tuning into a Station Manually . 39 Tuning into a Station Automatically . 39 Mute . 39 Reference Troubleshooting . 40-42 Language Code List. 43 Country Code List . 44 Specifications . 45-46 Warranty . Rear Cover About the symbols for instructions Indicates hazards likely to cause harm to the unit itself or other material damage. Indicates special operating features of this unit. Indicates tips and hints for making the task easier. I N O T C U D O R T N I Before Use Playable Discs DVD
(8 cm / 12 cm disc) Video CD (VCD)
(8 cm / 12 cm disc) Audio CD
(8 cm / 12 cm disc) In addition, this unit can play a DVD-R/RW, SVCD, Kodak PICTURE CD and CD-R or CD-RW that contains audio titles, MP3, WMA or JPEG files. otes Depending on the conditions of the recording equip-
ment or the CD-R/RW (or DVD-R/RW) disc itself, some CD-R/RW (or DVD-R/RW) discs cannot be played on the unit. Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc. Do not use irregularly shaped CDs (e.g., heart-
shaped or octagonal). It may result in malfunctions. otes on DVDs and Video CDs Some playback operations of DVDs and Video CDs may be intentionally fixed by software manufacturers. As this unit plays DVDs and Video CDs according to disc content designed by the software manufacturer, some playback features of the unit may not be available or other functions may be added. Make sure to also refer to the instructions supplied with the DVDs and Video CDs. Some DVDs made for busi-
ness purposes may not be able to be played on the unit. 1 Regional code of the DVD/CD/VCR Receiver and DVDs This DVD/CD/VCR Receiver is designed and manufactured for playback of region 1 encoded DVD software. The region code on the labels of some DVDs indicates which type of player can play those discs. This unit can only play DVDs labelled 1 or ALL. If you try to play any other discs, the message Check Regional Code will appear on the TV screen. Some DVDs that have no region code label may still be subject to area restrictions and therefore not playable. Disc-related terms Title (DVD only) The main film content or accompanying feature content or additional feature content, or music album. Each title is assigned a title reference number enabling you to locate it easily. Chapter (DVD only) Sections of a picture or a musical piece that are smaller than titles. A title is composed of one or several chap-
ters. Each chapter is assigned a chapter number, enabling you to locate the chapter you want. Depending on the disc, chapters may not be recorded. Track (Video CD and audio CD only) Sections of a picture or a musical piece on a video CD or an audio CD. Each track is assigned a track number, enabling you to locate the track you want. Scene On a video CD with PBC (Playback control) functions, moving pictures and still pictures are divided into sec-
tions called Scenes. Each scene is displayed in the menu screen and assigned a scene number, enabling you to locate the scene you want. A scene is composed of one or several tracks. Types of video CDs There are two types of video CDs:
Video CDs equipped with PBC (Version 2.0) PBC (Playback control) functions allow you to interact with the system via menus, search functions, or other typical computer-like operations. Moreover, still pictures of high resolution can be played if they are included in the disc. Video CDs not equipped with PBC (Version 1.1) Operated in the same way as audio CDs, these discs allow playback of video pictures as well as sound, but they are not equipped with PBC. IMPORTANT NOTE:
SPENT OR DISCHARGED BATTERIES MUST BE RECY-
CLED OR DISPOSED OF IN A SAFE MANNER IN COM-
PLIANCE WITH ALL APPLICABLE LAWS. FOR DETAILED INFORMATION, CONTACT YOUR LOCAL COUNTY SOLID WASTE AUTHORITY. 5 Before Use (Continued) Precautions Handling the unit When shipping the unit The original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packaged at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. In this case, position the unit away from the TV, VCR, or radio, or turn off the unit after removing the disc. To keep the surface clean Do not use volatile liquids, such as insecticide spray, near the unit. Do not leave rubber or plastic products in contact with the unit for a long period of time. They will leave marks on the surface. Cleaning the unit To clean the cabinet Use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit. To obtain a clear picture The DVD/CD/VCR Receiver is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality will be poor. Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your nearest dealer. Notes on Discs Handling discs Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints will not get on the surface. Do not stick paper or tape on the disc. Cleaning discs Fingerprints and dust on the disc can cause poor pic-
ture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the cen-
ter out. Yes No Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records. About Symbols About the symbol display may appear on the TV screen during operation. This icon means the function explained in this owners manual is not available at that moment or with that spe-
cific DVD. About the disc symbols for instructions A section whose title has one of the following symbols are applicable only to those discs represented by the symbol. DVD CD VCD2.0 VCD1.1 DVD Audio CDs. Video CDs with the PBC (playback control) function. Video CDs without the PBC (playback control) function. MP3 Discs. WMA Discs. JPEG Files. MP3 WMA JPEG Selecting the Viewing Source You must select one of your output sources (DVD or VCR) to view on the TV screen. Press DVD on the remote or DVD/VCR on the front panel until DVD indicator in the display window lights and output source of DVD deck is viewed on the TV screen. Press VCR on the remote or DVD/VCR on the front panel until VCR indicator in the display window lights and output source of VCR deck is viewed on the TV screen. If you want to view DVD deck output source:
If you want to view VCR deck output source:
Storing discs After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sun-
light, as there may be a considerable temperature increase inside the car. otes If you insert a disc while the DVD/CD/VCR Receiver is in the VCR mode, the DVD/CD/VCR Receiver will switch to DVD mode automatically. If you insert a cassette tape without an erasure pre-
vention tab intact while the DVD/CD/VCR Receiver is in the DVD mode, the DVD/CD/VCR Receiver will switch to VCR mode automatically. 6 I N O T C U D O R T N I Front Panel POWER Switches the DVD/CD/VCR Receiver ON and OFF. LINE2 (VIDEO IN/AUDIO IN (Left/Right)) Connect the audio/video output of an external source (Audio system, TV/ Monitor, another VCR). EJECT Ejects the tape in the VCR deck. VOLUME Adjusts sound level of speakers. PLAY (N) To play back a recorded tape. Disc Tray (DVD deck) Insert a disc here. CH/PRESET (v/V) Scans up or down through memorized channels or radio frequencies (stations). TUNING (v/V) Scans available channels in the area. PAUSE/STEP (X/C) Pause playback or recording temporarily/press repeatedly for frame-by-frame playback. STOP (x) Stops playback or recording. REC/ITR (z) To record normally or to activate Instant Timer Recording. Video Cassette Compartment
(VCR deck) Insert a video cassette here. COPY/MEMORY Press to copy a DVD in the DVD deck to a VCR tape in the VCR deck. Memorizes currently tuned Radio frequency (station). FM/AM Selects Radio operation mode. Remote Sensor Point the DVD/CD/VCR Receiver remote control here. Display window Shows the current sta-
tus of the DVD/CD/VCR Receiver. OPEN/CLOSE Opens or closes the disc tray. DVD/VCR Toggles control between the DVD deck and the VCR deck. BACKWARD (./m) DVD: Go to beginning of current chapter/track or to previous chapter/track. Press and hold for a fast reverse search. VCR: Rewinds the tape from STOP mode or for fast reverse picture search. FORWARD (M/>) DVD: Go to NEXT chapter/track. Press and hold for two seconds for a fast forward search. VCR: Advances the tape from STOP mode or for fast forward picture search. 7 Display Window RAND RANDOM playback active Indicates repeat mode ANGLE active SP SLP Displays the recording and playback speed. A cassette is in the VCR deck. PROG. Programmed playback active. Indicates encoding format of the current disc. HI-FI Indicates the unit is playing back a tape recorded in Hi-Fi. COPY DVD to VCR copy is in progress. OPT AUX Indicates source of DVD/CD/VCR Receiver is DIGITAL AUDIO IN. Indicates sound mode is PROLOGIC II. REC DVD/CD/VCR Receiver is Recording. TIMER DVD/CD/VCR Receiver is in timer record-
ing or a timer recording is programmed. VCR VCR deck is selected. Indicates clock, total playing time, elapsed time, remaining time, title number, chapter/track number, channel, radio frequency, level, volume, channel or current deck status (Playback, Pause, Mode, etc). STEREO Indicates a stereo broadcast is being received. SAP Indicates when a SAP BILINGUAL broadcast is being received. DVD DVD inserted. VCD Video CD inserted. CD Audio CD inserted. MP3 MP3 disc inserted 8 I N O T C U D O R T N I Remote Control POWER Switches DVD/CD/VCR Receiver ON and OFF. AUX/DVD/VCR/FM/AM select buttons Select the output source (DVD,VCR, AUX or FM/AM) to view on the TV screen. 0-9 numerical buttons Selects numbered options in a menu. INPUT Selects the VCR decks source
(Tuner, LINE 1, or LINE 2). TV/VCR To view channels selected by the VCR tuner or by the TV tuner. TUNING v/V Selects FM and AM band. MARKER Marks any point during playback. SEARCH Displays MARKER SEARCH menu. DISPLAY, CLK/CNT Accesses On-Screen display. Switches among the clock, tape counter and tape remaining modes on the display. b/B/v/V (left/right/up/down)
- Selects an option in the menu.
- CH/TRK (v/V): Selects VCR channels. Manually adjusts the tapes picture onscreen. SETUP, MENU Accesses or removes DVD Setup menu and VCR menu. PAUSE/STEP (XX) Pause playback or recording temporarily/press repeatedly for frame-by-frame playback. STOP (xx) Stops playback. REC/ITR (zz) Records normally or activates Instant Timer Recording. REPEAT, EZ review Repeat chapter, track, title, all. Replays the specified segment twice. A-B, SP/SLP
- Repeats sequence.
- Selects recording speed. RANDOM, CM Skip
- Plays tracks in random order.
- Fast forwards picture search through 30 seconds of recording. TITLE Displays the discs Title menu, if available. open/close open/close eject eject power power auxaux dvddvd vcrvcr fm /amam program program clear clear input input tv/vcr tv/vcr display display clkclk / cntcnt tuning tuning volume volume mutemute marker marker search search sound mode sound mode discdisc menumenu chch / trktrk memory memory enter enter chch / trktrk setup setup
/ menumenu return return pause pause / stepstep stopstop recrec / itritr backward backward playplay forward forward repeat repeat a-ba-b random random title EZ review EZ review zoomzoom spsp / slpslp angle angle cm skip cm skip audio subtitle audio subtitle OPEN/CLOSE, EJECT (ZZ)
- Opens and closes the disc tray.
- Ejects the tape in the VCR deck. PROGRAM Accesses or removes Program menu. CLEAR Removes a track number on the program menu or a mark on the MARKER SEARCH menu. VOLUME (+/) Adjusts volume of speaker. MUTE Turns off sound from speaker connec-
tors, AUDIO OUT and RF OUT jacks. SOUND MODE Selects sound mode between BYPASS, PRO LOGIC, PRO LOGICII (MOVIE, MUSIC, MATRIX) and 3D SURROUND. DISC MENU Accesses menu on a DVD disc. MEMORY/ENTER
- Acknowledges menu selection.
- Displays functions on the TV screen. RETURN Removes the Setup menu.
BACKWARD (..) DVD: Search backward*/go to beginning of current chapter or track or go to previ-
ous chapter or track. VCR: Rewinds the tape in STOP mode or for fast reverse picture search.
* Press and hold button for about two seconds.
PLAY (NN) Starts playback.
FORWARD (>>) DVD: Search forward*/go to next chapter or track. VCR: Advances the tape in STOP mode or for fast forward picture search.
* Press and hold button for about two seconds. ZOOM Enlarges DVD video image. ANGLE Selects a DVD camera angle if available. AUDIO Selects an audio language (DVD) or an audio channel (CD). SUBTITLE Selects a subtitle language. ote This remote control uses the same buttons for VCR and DVD functions
(ex. PLAY). To use the VCR, first press the VCR button. To use the DVD, first press the DVD button. 9 Rear Panel VCR IN LINE 1 (VIDEO IN/AUDIO IN (Left/Right)) Connect the audio/video output of an external source (Audio system, TV/Monitor, Another VCR). RF OUT (DVD/VCR OUT) Connect to a TV with RF coaxial inputs. ANT.IN Connect the VHF/UHF/CATV antenna to this terminal. DVD/VCR OUT (VIDEO/AUDIO (Left/Right)) Connect to a TV with video and audio inputs. COMPONENT/PROGRESSIVE SCAN VIDEO OUT
(Y Pb Pr) (DVD OUT) Connect to a TV with Y Pb Pr inputs. FOR DVD VIEW-
ING ONLY. AC Power Cord Plug into the power source. S-VIDEO OUT (DVD OUT) Connect to a S-Video Input on TV. FOR DVD VIEWING ONLY. SPEAKER Connectors Connect the six supplied speakers to these terminals. DIGITAL AUDIO IN (OPTICAL) Connect to a digital audio output on a digital device. AM Antenna Connectors Connect the AM antenna to this terminal. FM Antenna Connectors Connect the FM antenna to this terminal. Remote Control Operation Range Point the remote control at the remote sensor and press the buttons.
Distance: About 6m (20ft) from the front of the remote sensor
Angle: About 30 in each direction of the front of the remote sensor Remote control battery installation Detach the battery cover on the rear of the remote control, and insert two R03
(size AAA) batteries with aligned correctly. and A A A A A A Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). Dust Protection Cap Remove the dust protection cap from the OPTICAL DIG-
ITAL IN jack and connect the optical digital cable (not supplied) securely so that the configurations of both the cable and the connector match. Keep the dust protection cap and always reattach the cap when not using the connector to protect against dust intrusion. Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. 10 Connections ips
Depending on your TV and other equipment you wish to connect, there are various ways you could connect the DVD/CD/VCR Receiver. Use connections described on pages 11-14.
Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections. Caution
Make sure the DVD/CD/VCR Receiver is connected directly to the TV. Tune the TV to the correct video input channel.
Do not connect the DVD/CD/VCR Receivers DVD/VCR AUDIO OUT jack to the phono in jack (record deck) of your audio system.
Do not connect your DVD/CD/VCR Receiver via your VCR. The DVD image could be distorted by the copy protection system. TV. Connecting Antenna/Cable TV to DVD/CD/VCR Receiver 11 Disconnect the antenna leads from the rear of the 22 Identify the type of cable from your antenna. If it is a round cable as illustrated, it is a 75 ohm coaxial antenna cable. This cable will connect directly to the jack marked ANT.IN on your DVD/CD/VCR Receiver. ip If your antenna lead wire is a flat type antenna cable, connect it to an Antenna Adaptor (300-ohm to 75-ohm)
(not supplied) and slip the Adaptor onto the ANT.IN jack. The Adaptor does not screw on to the DVD/CD/VCR Receiver, it just slips over the jack. Antenna Antenna Cable TV Wall Jack Without Cable Box If your cable wire is connected to your TV without a converter or descrambler box, unscrew the wire from your TV and attach it to the ANT.IN jack on the DVD/CD/VCR Receiver. Use the supplied round coaxial cable to connect between the DVD/CD/VCR Receivers RF.OUT jack and the 75 ohm anten-
na input jack on the TV. With this connection, you can receive all midband, super band, and hyperband channels. With Cable Box If a converter is required in your cable system, follow the instruction below:
The cable hookup permits both TV and DVD/CD/VCR Receiver operation. To view or record a CATV channel 1 Tune the TV to the DVD/CD/VCR Receiver output channel
(CH 3 or 4). 2 Set the DVD/CD/VCR Receiver channel selector to the out-
put channel of the Cable Converter box using CH/TRK (v/V) or number (0-9) of your DVD/CD/VCR Receiver. (Example:
CH3) 3 Select the channel to view at the Cable Converter Box. I N O T A R A P E R P otes
With this connection, you CANNOT record one program while viewing another.
If you are using a cable box to tune channels, it is not nec-
essary to do Auto Channel Programming, (Auto Channel Search) as indicated on page 18. Cable TV Wall Jack Back Panel of Typical Cable Box Flat Wire
(300 ohm) 300/75 ohm Adaptor
(Not supplied) OR OR Rear of DVD/CD/VCR Receiver Rear of DVD/CD/VCR Receiver 11 Connections (Continued) Basic TV Connections
Make one of the following connections, depending on the capabilities of your TV. RF coaxial connection Connect the RF.OUT jack on the DVD/CD/VCR Receiver to the antenna in jack on the TV using the 75-ohm Coaxial Cable supplied (R). ote If you use this connection, tune the TV to the DVD/CD/VCR Receivers RF output channel
(CH 3 or 4). How to set the DVD/CD/VCR Receivers RF output channel When the DVD/CD/VCR Receiver is turned off, press and hold CH/PRESET (v/V) on the front panel for about five seconds to change the RF output channel
(CH 03 or CH 04). RF 03 or RF 04 appears in the display window. Audio/Video connection 11 Connect the DVD/VCR VIDEO OUT jack on the DVD/CD/VCR Receiver to the video in jack on the TV using the supplied video cable (V). 22 Connect the Left and Right DVD/VCR AUDIO OUT jacks on the DVD/CD/VCR Receiver to the audio left/right in jacks on the TV (A) using the supplied audio cables. ote If you use this connection, set the TVs source selector to VIDEO. Rear of TV ANTENNA INPUT AUDIO INPUT VIDEO INPUT COMPONENT/PROGRESSIVE SCAN VIDEO INPUT S-VIDEO INPUT L R L Pr Pb Y R A V C S Rear of DVD/CD/VCR Receiver 12 Optional TV Connections otes
DVD playback can ONLY be done using the S-VIDEO OUT and COMPONENT/PROGRESSIVE SCAN VIDEO OUT connection options below. The tuner and VCR will still output through the RF.OUT (R) or DVD/VCR OUT (A, V) jack. (See left) S-Video Connection 11 Connect the S-VIDEO OUT jack on the DVD/CD/VCR Receiver to the S-Video in jack on the TV using the supplied S-Video cable (S). 22 Connect the Left and Right AUDIO OUT jacks on the DVD/CD/VCR Receiver to the audio left/right in jacks on the TV using the supplied audio cables
(A). Component Video (Color Stream) connection 11 Connect the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on the DVD/CD/VCR Receiver to the corresponding in jacks on the TV using user-
supplied Y Pb Pr cables (C). 22 Connect the Left and Right AUDIO OUT jacks of the DVD/CD/VCR Receiver to the audio left/right in jacks on the TV (A) using the supplied audio cables. Progressive Scan (ColorStream pro) connection
If your television is a high-definition or digital ready television, you may take advantage of the DVD/CD/VCR Receivers progressive scan output for the highest video resolution possible.
If your TV does not accept the Progressive Scan for-
mat, the picture will appear scrambled if you try Progressive Scan on the DVD/CD/VCR Receiver. 11 Connect the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on the DVD/CD/VCR Receiver to the corresponding in jacks on the TV using an optional Y Pb Pr cable (C). 22 Connect the Left and Right AUDIO OUT jacks of the DVD/CD/VCR Receiver to the audio left/right in jacks on the TV (A) using the supplied audio cables. otes Set the Progressive Scan to On on the DVD setup menu for progressive signal, see page 21. Progressive scan does not work with the analog video connections (yellow VIDEO OUT jack). Connections (Continued) Speaker System Connections Connect the speakers using the supplied speaker cords by matching the colors of the terminals and those of the cords. To obtain the best possible surround sound, adjust the speaker parameters (distance, level, etc.). otes
Be sure to match the speaker cord to the appropriate terminal on the components: 3 to 3 and # to #. If the cords are reversed, the sound will be distorted and lack bass.
If you use front speakers with low maximum input rat-
ing, adjust the volume carefully to avoid excessive volume output to the speakers.
Do not disassemble the front covers of supplied speakers. Center Speaker Front Speaker
(Right) Front Speaker
(Left) Speaker Positioning For a normal setup use 6 speakers (2 front speakers, center speaker, 2 rear speakers and subwoofer). Front Speakers Based on your listening position, set up the speakers at equal distance. And by hearing position, set up an interval between speakers of 45 degree. Center Speaker It is ideal that the center speakers and front speakers are same height. But normally place it above or below the television as shown below. I N O T A R A P E R P Rear Speakers Place the rear surround speakers to the left and right behind the primary listening area. These speakers recreate sound motion and atmosphere required for surround playback. For best results, do not install the rear speakers too far behind the listening position, install them at or above the level of the listeners ears. It is also effective to direct the rear speakers towards a wall or ceiling to further disperse the sound. In the case of a smaller room size, if the audience is near to the rear wall set the rear speakers opposite each other, and set the rear speakers 60 - 90 cm above the listeners ears. Subwoofer This can be placed in any front position. Center Speaker Subwoofer Front Speaker
(Left) Rear Speaker
(Left) Front Speaker
(Right) Rear Speaker
(Right) Rear speaker
(Right surround) Rear speaker
(Left surround) Subwoofer Speaker Positioning Example 13 Digital Device Connections Connect the DIGITAL AUDIO IN (OPTICAL) jacks on the DVD/CD/VCR Receiver to the digital audio out (opti-
cal) jacks on your digital device (DVD Player, Game device, etc.), using optional optical audio cable. To select source of DVD/CD/VCR Receiver to OPTICAL IN, press AUX on the remote control. otes
If the audio format of the digital output does not match the capabilities of your DVD/CD/VCR Receiver, the DVD/CD/VCR Receiver will produce a strong, dis-
torted sound or no sound at all.
The Optical input function is available only when the other units Sampling Frequency is 32 - 48kHz. Game Device HDTV Receiver OR Rear of DVD/CD/VCR Receiver Connections (Continued) Radio Antenna Connections Connect the supplied FM/AM antennas for radio listen-
ing. connectors. 11 Connect the AM loop antenna to the AM antenna 22 Connect the FM wire antenna to the FM antenna connectors. otes
To prevent noise pickup, keep the AM loop antenna away from the DVD/CD/VCR Receiver and other components.
Be sure to fully extend the FM wire antenna.
After connecting the FM wire antenna, keep it as hori-
zontal as possible. FM wire antenna (supplied) AM loop antenna (supplied) Rear of DVD/CD/VCR Receiver Accessory Audio/Video (A/V) Connections to DVD/CD/VCR Receiver Connect the VCR IN LINE1 or LINE2 jacks on the DVD/CD/VCR Receiver to the audio/video out jacks on your accessory component, using optional audio/video cables. Jack Panel of Accessory Component
(VCR, Camcorder, etc.) AUDIO OUTPUT R L VIDEO OUTPUT OR Rear of DVD/CD/VCR Receiver Front of DVD/CD/VCR Receiver 14 Selecting the Input Source AUX DVD VCR FM/AM open/close open/close eject eject power power auxaux dvddvd vcrvcr fm /amam program program clear clear INPUT input input tv/vcr tv/vcr display display clkclk / cntcnt tuning tuning volume volume mutemute marker marker search search sound mode sound mode discdisc menumenu chch / trk memory memory enter enter chch / trk setup setup
/ menumenu return return pause pause / stepstep stopstop recrec / itr backward backward playplay forward forward repeat repeat a-ba-b random random title EZ review EZ review zoomzoom spsp / slpslp angle angle cm skip cm skip audio subtitle audio subtitle I N O T A R A P E R P Follow these guidelines to select and switch among the various DVD/CD/VCR Receiver input and output sources:
DVD To view output from the DVD deck:
Press DVD on the remote or DVD/VCR on the front panel until the DVD indicator on the front panel lights and output from the DVD deck is viewed on the TV screen. VCR To view output from the VCR deck:
Press VCR on the remote or DVD/VCR on the front panel until the VCR indicator on the front panel lights and output from the VCR deck is viewed on the TV screen. FM/AM(RADIO) To listen to AM/FM radio broadcasts:
Press RADIO on the remote to toggle between AM and FM radio. The selected frequency appears on the front panel display. AUX To listen to an audio source connected to the DIGITAL AUDIO IN (OPTICAL) jack with video from LINE 1:
Press AUX on the remote control once. DIGITAL AUDIO IN will appear and the OPT/AUX indicator will light on the front panel display. Audio will come from an external source connected to the DIGITAL AUDIO IN (OPTICAL) jack and video will come from an external source connected to the VIDEO IN jack of LINE 1 (for rear panel). To listen to an audio source connected to the AUDIO IN jack of LINE1 with video from LINE 1:
Press AUX on the remote control a second time. ANALOG AUDIO IN will appear and the OPT/AUX indicator will turn off on the front panel display. Audio will come from an external source connected to the AUDIO IN jacks of LINE1 (for rear panel) and video will come from an external source connected to the VIDEO IN jack of LINE 1 (for rear panel). 15 Before Operation - Sound Mode Descriptions Sound Mode You can enjoy surround sound simply by selecting one of the pre-programmed sound fields according to the program you want to listen to. Press SOUND MODE repeatedly until the sound mode you want appears in the display window as below. Each time you press SOUND MODE button, the sound mode is changed in the following order;
BYPASS PRO LOGIC MOVIE MUSIC MATRIX 3D SURROUND When DVD is inserted. You can change the sound mode of DVD (Dolby Digital, DTS, PRO LOGIC, etc) by pressing the AUDIO button on the remote during playback. Although the DVD contents differ from disc to disc, the follow-
ing explains the basic operation when this feature is used. Each time you press AUDIO button, the sound mode of DVD is changed as the following order;
For your reference The DVD/CD/VCR Receiver memorizes the last mode settings for each source individually. You can identify the encoding format of program software by looking at its packaging.
- Dolby Digital discs are labelled with the
- Dolby Surround encoded programs are labelled with logo. the logo.
- DTS Digital Surround discs are marked with DTS. ote
When you play sound tracks with 96kHz sampling frequency, the output signals will be converted to 48kHz (sampling frequency). Mini Glossary for Audio Stream &
Surround mode Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio from DTS program sources such as discs, DVD and compact discs, etc.bearing the trademark. DTS Digital Surround delivers up to 6 channels of transparent audio(which means identical to the original masters) and results in excep-
tional clarity throughout a true 360 degree sound field. The term DTS is a trademark of DTS Technology, LLC. Manufactured under license from DTS Technology, LLC. The Dolby Digital surround format lets you enjoy up to 5.1 channels of digital surround sound from a Dolby Digital pro-
gram source. If you play DVDs with enjoy even better sound quality, greater spatial accuracy, and improved dynamic range. mark, you can Use this mode when playing movie or Dolby Digital 2 channel which carries the mark. This mode provides the effect of being in a movie theatre or live concert house-an effect with an intensity which can only be obtained through DOLBY PRO LOGIC SURROUND. The effect of the front/back/left/right movement of the sound image, as well as the sense of fixed position in the sound image, is much clearer and more dynam-
ic than before.
(II) Dolby Pro Logic II creates five full-bandwidth output channels from two-channel sources. This is done using an advanced, high-purity matrix surround decoder that extracts the spatial properties of the original recording without adding any new sounds or tonal colorations. MOVIE mode:
The Movie mode is for use with stereo television shows and all programs encoded in Dolby Surround. The result is enhanced soundfield directionality that approaches the quality of discrete 5.1-channel sound. MUSIC mode:
The Music mode is for use with any stereo music recordings, and provides a wide and deep sound space. The Music mode includes controls that allow the sound to be tailored to individual listening tastes. MATRIX mode:
The Matrix mode is the same as the Music mode except that the directional enhancement logic is turned off. It may be used to enhance mono signals by making them seem larger. The Matrix mode may also find use in auto systems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals from a logic decoder. The ultimate cure for poor FM stereo reception may be simply to force the audio to mono. 3D SURROUND This unit can produce a 3D Surround effect, using 3D Surround Sound technology, which simulates multi-channel audio play-
back from two conventional stereo speakers instead of the five or more speakers normally required to listen to multi-channel audio from a home theatre. This feature works with DVD discs encoded with Dolby Pro Logic and Dolby Digital audio tracks. BYPASS Software with multichannel surround audio signals is played according to the way it was recorded. 16 VCR Operation Setup On-Screen Display (OSD) Some of these functions appear during VCR operated. PLAY SP HI-FI CH 4 STEREO JUL 5 , SAT 2:15 PM TAPE SPEED DISPLAY Shows the current tape speed. FUNCTION DISPLAY Indicates the function in progress. HI-FI DISPLAY Indicates the unit is playing back tape recorded in Hi-Fi. CHANNEL DISPLAY Indicates the selected channel (or LINE1(L1), LINE2(L2)). STEREO/SAP DISPLAY (MONO is not displayed) Shows the type of audio signal received by the VCR tuner. DATE DISPLAY Shows the current date. (Month/Date/Day of the week format) CLOCK/COUNT/REMAIN DISPLAY EASY INFORMATION If the Extended Data Service (XDS) signals are provided along with normal TV signal in your area or during play-
back of a tape recorded with Extended Data Service
(XDS) signals, the station ID, program title, and program details are shown on the TV screen. When viewing a channel with Extended Data Service (XDS) signals, press MEMORY/ENTER and the station ID will appear on the TV screen. Press MEMORY/ENTER again and the program details will appear on the TV screen. When viewing a tape recorded with Extended Data Service (XDS) signals, press MEMORY/ENTER twice and the program title and program details will appear on the TV screen. PROGRAM DETAILS LENGTH: Indicates the run length of a program. TIME REMAINING: Indicates the remaining time of a program. RATING: Indicates the rating of the current program
(N/A, G, PG, PG-13, R, NC-17, X and Not Rated). The rating N/A means that the motion picture ratings are not applicable to this program. I N O T A R A P E R P CH 4 WABC STEREO SP Home video JUL 5 , SAT 2:15 PM PROGRAM DETAILS Home video LENGTH 01:00 TIME REMAINING 00:26 RATING N/A Shows the current time, the tape counter and remaining time on the tape. Easy Information Screen
(Station ID) Easy Information Screen
(Program details) Each press of the MEMORY/ENTER changes the TV on-screen displays in the following sequence. STOP SP CH 4 STEREO JUL 5 , SAT 2:15 PM 2:15 PM 0:35:40 REM 1:58 otes
The function displays remain on the TV screen for 5 seconds.
The clock (or tape counter, tape remaining) mode will remain on the screen until you press MEMORY/ENTER.
The tape counter and the remaining tape length indicator appear only when a cassette is inserted. Also, the remaining tape length indicator appears after any tape operation. On-Screen Menus Setup The SETUP, clock setting (CLOCK), and timer recordings (PROGRAM) are accessed conveniently with the on-screen menus, that lead you through each step. The following pages describe the on-screen menu selections available. Menu Selection Your VCR allows remote control adjustment of several features. 11 Press MENU and the MAIN menu will appear. 22 Select the desired menu with v/V button and then press MEMORY/ENTER. ote Menus remain on-screen for 3 minutes. MAIN MENU CLOCK SET (page 19) PROGRAM (page 25) TUNING (page 18) SETUP (page 18) 33Press MENU when finished. 17 VCR Operation Setup (Continued) Using the VCR Setup Menu 11 Press MENU and the MAIN menu will appear. 22 Use vv/VV to select the SETUP menu, then press MEMORY/ENTER. The SETUP menu will appear. 33Use vv/VV to choose a desired option on the SETUP menu. Then use bb/BB to choose a desired setting. FUNCTION OSD The on-screen display of this DVD/CD/VCR Receiver can be turned on or off.
FUNCTION OSD can be switched between ON and OFF using b/B. LANGUAGE SELECT The on-screen programming of this DVD/CD/VCR Receiver can be displayed in either English, Spanish, or French.
LANGUAGE SELECT can be switched between ENGLISH, SPANISH and FRENCH using b/B. AUDIO MODE The DVD/CD/VCR Receiver has two separate audio playback systems, the high quality VHS Hi-Fi system and standard NORMAL mono system. The same audio is generally recorded on both systems. The VHS Hi-Fi system plays on separate (left and right) channels, and the NORMAL system plays monaural sound. The normal track is always played so the cassette can be played on a DVD/CD/VCR Receiver that does not have VHS Hi-Fi.
AUDIO MODE can be switched between HI-FI and NORMAL using b/B. BROADCAST TYPE (STEREO/SAP/MONO) Multichannel Television Sound (MTS) carries stereo and/or Second Audio Program (SAP) bilingual signals. Set this display to the desired position when both MTS stereo and SAP signals are received. When only one of the MTS signal is received, the DVD/CD/VCR Receiver automatically selects the corresponding receiving mode (Stereo or SAP) regardless of the selected posi-
tion. For normal operation, the display should be in the STEREO position. The DVD/CD/VCR Receiver will then record a STEREO pro-
gram when available, and record a mono program IF the program is NOT IN STEREO. For weak STEREO and/or SAP broadcasts, changing the dis-
play to mono may give clearer sound.
BROADCAST TYPE can be switched between STEREO, SAP, and MONO using b/B. AUDIO OUTPUT (STEREO/LEFT/RIGHT) Used during playback [when AUDIO MODE (HI-FI/NORMAL) is in HI-FI position] for selecting the audio output signals from the AUDIO OUT terminals (L ch and R ch), and RF.OUT. This display setting should normally be left in the stereo posi-
tion, so that when a stereo tape is played, the stereo sound will be heard through the left and right channels. If a mono tape is played and the audio output is set to stereo, the same mono sound will be heard from both left and right channels.
AUDIO OUTPUT can be switched between STEREO, LEFT, and RIGHT using b/B. 44 Press MENU when finished. 18 Channel Selection This DVD/CD/VCR Receiver is equipped with a frequency synthesized tuner capable of receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and CATV channels 1-125. Preparation:
Connect the DVD/CD/VCR Receiver to the desired type of antenna or cable TV system, as shown in Connecting Antenna/Cable TV to DVD/CD/VCR Receiver on page 11. AUTO CHANNEL PROGRAMMING 11 Press MENU and the MAIN menu will appear. 22 Use vv/VV to select the TUNING menu, then press MEMORY/ENTER. The TUNING menu will appear. 33Use VV to choose the SOURCE SELECT option, then use bb/BB to select TUNER. Press b/B repeatedly to switch between TUNER, LINE1(L1) and LINE2(L2). 44 Use vv/VV to choose the AUTO CHANNEL SET option, then use bb/BB to search for channels. The tuner will automatically cycle through all available channels in the area and place them in the tuners memory. 55After the AUTO CHANNEL SET PROCEEDING is complete, make sure the TUNING BAND is set appropriately (TV or CATV) using vv/VV and choosing the correct TUNING BAND (TV or CATV) by using bb/BB while in the TUNING menu. Remember, TV is for the air antenna reception, CATV is for cable or wireless cable connection. 66Press MENU to return to the TV screen. 77 Use CH/TRK (vv/VV) or CH (vv/VV) on the front panel to cycle the DVD/CD/VCR Receiver through the channels in memory. TO ADD OR ERASE CHANNELS FROM MEMORY This feature allows you to add or erase channels in memory manually. 1 Use VV to choose the CH. ADD/DEL option on the TUNING menu. Use b/B to select a channel to add or erase. 2 Use MEMORY/ENTER to add or erase the channel. Repeat steps 1 and 2 to add or erase channels. 3 Press MENU to return to the TV screen. VCR Operation Setup (Continued) Setting the Clock The DVD/CD/VCR Receiver gives you two ways to set the time and date: the Auto Clock Feature or manually. The Auto Clock feature enables the DVD/CD/VCR Receiver to set up the clock while the DVD/CD/VCR Receiver is turned off. Things to know before starting
The clock uses the 12-hour system. (Be sure to set AM and PM correctly.) (AM does not appear.)
The initial Clock Setting is JANUARY 1, 2003, 12:00 AM. Auto Clock Set The Auto Clock Set feature is set to ON at the factory. In the ON setting, the DVD/CD/VCR Receiver looks for a channel carrying XDS (Extended Data Services) information. XDS updates the clock using the Coordinated Universal Time. The Auto Clock feature enables the DVD/CD/VCR Receiver to set up the clock while the DVD/CD/VCR Receiver is turned off. 11 Press MENU and the MAIN menu will appear. 22 Use vv/VV to choose the CLOCK menu. Press MEMORY/ENTER and the CLOCK menu will appear. ote There are cases where the TV station does not send or sends the wrong time. Therefore, the incorrect time will be set. If this happens we recommend that you set the clock manually. Manual Clock Set 11 Press MENU and the MAIN menu will appear. 22 Use vv/VV to choose the CLOCK menu. Press MEMORY/ENTER and the CLOCK menu will appear. I N O T A R A P E R P Use bb/BB to choose the date. The day of the week will display automatically. 33Use bb/BB to choose the month. 44 Use VV to choose the DAY option. 55Use VV to choose the YEAR option. 66Use VV to choose the TIME option. Use bb/BB to choose the time. Press and hold b/B to advance clock continuously. Use bb/BB to choose the year. 33Use VV to choose the AUTO CLOCK SET option. Use bb/BB to choose ON. The Auto Clock Set feature is set to ON at the factory. In the ON setting, the DVD/CD/VCR Receiver looks for a channel carrying XDS (Extended Data Services) information. XDS updates the clock using the Coordinated Universal Time. 44 Use EE to choose the DAYLIGHT SAVINGS option. Use FF or GG to choose AUTO, ON, or OFF. If you choose AUTO, the VCR sets the clock using the DST information broadcast in the signal (channel). If you choose ON, the VCR adjusts the clock for Daylight Saving Time automatically. 55Use EE to choose the TIME ZONE option. Use FF or GG to choose the correct time zone
(AUTO, EASTERN, CENTRAL, MOUNTAIN, PACIFIC, ALASKA or HAWAII). If AUTO is selected as the time zone, the VCR sets the clock using the first Coordinated Universal Time informa-
tion it finds in a broadcast signal. 66Press MENU when finished. 77 Turn off the DVD/CD/VCR Receiver and the auto clock set feature sets the time. 77 Use EE to choose the DAYLIGHT SAVINGS option. Use FF or GG to choose AUTO, ON, or OFF. If you choose AUTO, the VCR sets the clock using the DST information broadcast in the signal (channel). If you choose ON, the VCR adjusts the clock for Daylight Saving Time automatically. 88Press MENU when finished. ote If setting the clock manually, AUTO CLOCK SET must set to OFF. If set to ON, an incorrect date and/or time will be entered again when the DVD/CD/VCR Receiver is turned off. 19 DVD Operation Setup General Explanation This manual gives basic instructions for operating the DVD/CD/VCR Receiver. Some DVDs require specific operation or allow only limited operation during play-
back. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the DVD/CD/VCR Receiver or is not available on the disc. On-Screen Display General playback status can be displayed on the TV screen. Some items can be changed on the menu. On-screen display operation 11 Press DISPLAY during playback. 22 Press 33/44 to select an item. The selected item will be highlighted. 33Press 11/22 to change the setting of an item. The number buttons can be also be used for setting numbers (e.g., title number). For some functions, press ENTER to execute the setting. Temporary Feedback Field Icons TITLE CHAPT TRACK ALL A B OFF Repeat Title Repeat Chapter Repeat Track (non-PBC Video CDs only) Repeat All Tracks (non-PBC Video CDs only) Repeat A-B Repeat Off Resume play from this point Action prohibited or not available otes
Some discs may not provide all of the features on the on-screen display example shown below.
If no button is pressed for 10 seconds, the on-screen display disappears. DVD Items Title Number Chapter Number Time search Audio language and Digital Audio Output mode Subtitle language Angle Sound VCD2.0 VCD1.1 Items Track Number Time Audio Channel Sound 20 Function (Press 33/44 to select desired item) Shows the current title number and total number of titles, and skips to the desired title number. Shows the current chapter number and total number of chapters, and skips to the desired chapter number. Shows the elapsed playing time, and searches the point directly from the elapsed time. Shows the current audio soundtrack language, encoding method, and channel number, and changes the setting. Shows the current subtitles language, and changes the setting. Shows the current angle number and total number of angles, and changes the angle number. Shows the current sound mode, and changes the setting. Function (Press 33/44 to select desired item) Shows the current track number, total number of tracks and PBC On mode, and skips to the desired track number. Shows the elapsed playing time (Display only) Shows the audio channel, and changes the audio channel. 1 /3 1 /12 0:20:09 1 ENG D 5.1 CH ABC OFF 1 /1 BYPASS 1 /4 0:20:09 STER. BYPASS Shows the current sound mode, and changes the setting. Selection Method 11 / 22, or Numbers, ENTER 11 / 22, or Numbers, ENTER Numbers, ENTER 11 / 22, or AUDIO 11 / 22, or SUBTILE 11 / 22, or ANGLE 11 / 22, or SOUND MODE Selection Method 11 / 22, or Numbers, ENTER 11 / 22, or AUDIO 11 / 22, or SOUND MODE DVD Operation Setup (Continued) Initial Settings You can set your personal preferences on the DVD+VCR. General Operation 11 Press SETUP. The Setup menu appears. Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect Menu Language Progressive Scan 5.1 Speaker Setup 5.1 Speaker Setup Others Original English French German Spanish Italian Chinese Polish Hungarian Other then vv/VV to select the desired setting. tion. Some options require additional steps. The screen will show the current setting for the selected option, as well as alternate setting(s). 22 Use vv/VV to select the desired option. 33 While the desired option is selected, press BB, 44 Press MEMORY/ENTER to confirm your selec-
55Press SETUP, RETURN, or PLAY ( B) to exit the Language Disc Language Select a language for the discs Menu, Audio, and Subtitle features. Original : The original language set for the disc is selected. Other : To select another language, use number buttons to enter the corresponding 4-digit number according to the language code list on page 43. If you enter the wrong language code, press CLEAR. setup menu. DVD ote Disc Language selection may not work for some DVDs. Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect Menu Language Progressive Scan 5.1 Speaker Setup 5.1 Speaker Setup Others Original English French German Spanish Italian Chinese Polish Hungarian Other Menu Language Select a language for the Setup menu. This is the menu you see when you press SETUP. English Spanish French Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect Menu Language Progressive Scan I N O T A R A P E R P DVD Picture TV Aspect 4:3 Letterbox: Select when a standard 4:3 TV is con-
nected. Displays pictures with masking bars above and below the picture. 4:3 Panscan: Select when a standard 4:3 TV is con-
nected. Displays pictures cropped to fill your TV screen. Both sides of the picture are cut off. 16:9 Wide: Select when a 16:9 wide TV is connected. 4:3 Letterbox 4:3 Panscan 16:9 Wide Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect Menu Language Progressive Scan 5.1 Speaker Setup 5.1 Speaker Setup Others DVD Progressive Scan Progressive Scan Video provides the highest resolution pictures with less flicker and line structure. If you are using the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks, but are connecting the DVD+VCR to a standard (analog) television, set Progressive Scan to Off. If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On. Off On Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect Menu Language Progressive Scan 5.1 Speaker Setup 5.1 Speaker Setup Others Caution Once the setting for progressive scan output is entered, an image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan to On in error, you must reset the unit. Pointing the remote at the player, press the STOP (x) key to stop any disc that is playing. Next, press the STOP (x) key again and hold it for five seconds before releasing it. The video output will be restored to the standard setting, and a picture will once again be visible on a conventional analog TV or monitor. 21 Auto Play DVD You can set up the DVD/CD/VCR receiver so a DVD disc automatically starts playing whenever the DVD is inserted. DRC Vocal PBC Auto Play On On On Off Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect Menu Language Progressive Scan 5.1 Speaker Setup 5.1 Speaker Setup Others If Auto Play mode is set to On, this DVD/CD/VCR receiver will search a title that playback time is longest and then play back the title automatically. On: Auto Play function is activated. Off: Auto Play function is not activated. ote The Auto Play function may not work for some DVDs. DVD Operation Setup (Continued) Speaker setup 5.1 Speaker settings DVD Select speaker settings, including volume balance and delay time, or test the speaker settings. Speaker settings are only active on the Analog Multi-
Channel Output. (See Speaker Setup, page 37.) Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect Menu Language Progressive Scan 5.1 Speaker Setup Others R R Front L Volume 0 dB Size Small Distance 1 ft Test Return Others The DRC, Vocal, PBC and Auto Play settings can be changed.
Press 33/44 to select the desired item and press ENTER. The setting of the selected item is changed between On and Off. Dynamic Range Control (DRC) With the DVD format, you can hear a programs sound-
track in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Then, you may listen to a movie at a lower volume without losing clarity of sound. Set DRC to On for this effect. Vocal Set Vocal to On only when a multi-channel karaoke DVD is playing. The karaoke channels on the disc will mix into normal stereo sound. PBC Set Playback Control (PBC) to On or Off. On: Video CDs with PBC are played according to the PBC. Off: Video CDs with PBC are played the same way as Audio CDs. 22 DVD Operation Setup (Continued) Parental Control Country Code DVD DVD Rating Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain scenes on the disc. These scenes are rated from 1 to 8, and alternatively, more suitable scenes are available for selection on some discs. Ratings are country dependent. The Parental Control feature allows you to prevent discs from being played by your children or to have certain discs played with alternative scenes. Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect Menu Language Progressive Scan Digital Audio Output 5.1 Speaker Setup Others 8 7 6 5 4 3 2 1 Unlock Change buttons. 11 Select Rating on the Setup menu using vv/VV 22 While Rating is selected, press BB. 33When you have not entered a password yet. Enter a 4-digit password using the numbered but-
tons to create a personal 4-digit security password, then press MEMORY/ENTER. Enter the 4-digit password again and press MEMORY/ENTER to verify. When you have already entered a password;
Enter a 4-digit password using the numerical buttons to confirm the personal 4-digit security password, then press MEMORY/ENTER. If you make a mistake before pressing MEMORY/ENTER, press CLEAR and enter 4-digit security password again. 44 Select a rating from 1 to 8 using vv/VV buttons. One (1) has the least playback restrictions. Eight (8) has the most playback restrictions. Unlock: If you select Unlock, Parental Control is not active. The disc will play in full. Ratings 1 to 8: Some discs contain scenes not suitable for children. If you set a rating for the DVD+VCR, all disc scenes with the same rating or lower will be played. Higher rated scenes will not be played unless an alternative scene is available on the disc. The alternative must have the same rating or a lower one. If no suitable alternative is found, playback will stop. You must enter the 4-digit pass-
word or change the rating level in order to play the disc. 55Press MEMORY/ENTER to confirm your rating selection, then press SETUP to exit the menu. Enter the code of a country whose standards were used to rate the DVD video disc, referring to the list (See Country Code List, page 44.). Code Set U S Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect Menu Language Progressive Scan Digital Audio Output 5.1 Speaker Setup Others I N O T A R E P O buttons on the setup menu. 11 Select the Country Code option using the v/V 22 While Country Code is selected, press B. 33Follow step 3 of Rating on left. 44 Select the first character using the v/V buttons. 55Press 2 to shift to second character and select 66Press MEMORY/ENTER to confirm your Country Code selection, then press SETUP to exit the menu. the second character using v/V buttons. ote Confirmation of the 4-digit password is necessary when the password is changed (see Changing the 4-digit password below ). Changing the 4-digit password 1 Follow Steps 1-2 as shown above to the left (Rating). 2 Enter the old password, then press MEMORY/ENTER. 3 Select Change using v/V buttons then press MEMO-
RY/ENTER. 4 Enter the new 4-digit password, then press MEMO-
RY/ENTER. 5 Enter exactly the same password a second time and verify by pressing MEMORY/ENTER. 6 Press SETUP to exit the menu. If you forget your 4-digit password If you forget your password, to clear the current pass-
word follow the procedure below. 1 Press SETUP to display the setup menu. 2 Enter the 6-digit number 210499 and then press MEMORY/ENTER. The 4-digit password is cleared. 3 Enter a new password as shown above to the left
(Rating). 23 VCR Operation Normal Playback Preparation:
Turn on the TV.
Tune the TV to the DVD/CD/VCR Receiver output channel
(CH 3 or 4) or set the TVs source selector to VIDEO.
If a direct VIDEO/AUDIO connection is made between the DVD/CD/VCR Receiver and the TV, set the TVs source selec-
tor to VIDEO.
Set the Output Source to VCR as shown in Selecting the Viewing Source on page 6. 11 Insert a prerecorded video cassette. indicator will light and the DVD/CD/VCR The Receiver will power-up automatically.
Make sure that the TIMER indicator in the display window is not lighted. If it is, press POWER once.
If a tape without a safety tab is inserted, the unit will start playback automatically. 22 Press PLAY (NN) once. PLAY appears on the TV screen .
It is not necessary to select the tape speed for playback. It will be automatically selected by the DVD/CD/VCR Receiver.
In playback, the TV/VCR selector switches to VCR mode automatically. 33 Press STOP (xx) to stop playback. STOP appears on the TV screen.
If the tape reaches the end before STOP (x) is pressed, the DVD/CD/VCR Receiver will automatically stop, rewind and eject the tape, and it will turn itself off. Tracking Control Auto Tracking The automatic tracking function adjusts the picture to remove snow or streaks. The AUTO TRACKING function works in the following cases:
A tape is played back for the first time.
Tape speed (SP, LP, SLP) changes.
Streaks or snow appear because of scratches on the tape. Manual Tracking If noise appears on the screen during playback, press either CH/TRK vv/VV on the remote control or CH (vv/VV) on the front panel until the noise on the screen is reduced.
If vertical jitter is present, adjust tracking controls very carefully.
Tracking is automatically reset to normal when the tape is ejected or the power cord is unplugged for more than 3 seconds. Special Effect Playbacks Special effects playback notes
Horizontal lines (noise bars) will appear on the TV screen. This is normal.
The audio is automatically muted during special effect modes, so there is no sound during search.
During high-speed picture search mode, a short period is needed to stabilize tape speed when re-entering the PLAY mode. Slight interference may be observed during this period. 24 Search This function lets you quickly and visually search for a desired tape section in either direction: forward or reverse. 1 Press BACKWARD (.) or FORWARD (>) during playback. The DVD/CD/VCR Receiver will be activated in the SEARCH mode.
If the DVD/CD/VCR Receiver is left in the SEARCH mode for more than 3 minutes, the DVD/CD/VCR Receiver will automatically enter the PLAY mode, to protect the tape and video heads. 2 To return to playback, press PLAY (NN). Still Picture and Frame-by-Frame Playback 1 Press PAUSE/STEP (X) during playback. Still picture will appear on the TV screen.
If a still picture vibrates vertically, stabilize it using v/V on the remote control.
If the DVD/CD/VCR Receiver is left in the STILL mode for more than 5 minutes, the DVD/CD/VCR Receiver will automatically enter the STOP mode to protect the tape and video heads. 2 Press PAUSE/STEP (X) repeatedly to advance the video picture one frame at a time while viewing a still picture. 3 To return to playback, press PLAY (NN). Slow Motion 1 While in still mode, press FORWARD (>). The tape will be played back at a speed 1/19 times slower than the normal speed.
During slow playback, use v/V on the Remote Control to minimize noise bands.
If slow motion mode continues for more than 3 minutes, the DVD/CD/VCR Receiver will automatically change to playback mode. 2 To return to playback, press PLAY (NN). CM Skip (Commercial Skip) This is useful for skipping commercials or short program segments. 1 Press CM Skip during playback. The tape will fast forward picture search through 30 seconds of recording.
Skipping time can be extended by pressing CM Skip repeatedly.
Subsequent presses result in advancing the fast forward picture search time by 30-second increments (maximum 3 minutes). 2 When the search is complete, the DVD/CD/VCR Receiver will go into playback mode automatically. EZ (EASY) Review You can replay a specified segment twice. 11 During playback, press and hold EZ REVIEW for 22 Release EZ REVIEW at the beginning of the more than 3 seconds at the end of the segment and your VCR will start reverse search. segment. The segment is replayed twice automatically. To return to normal play, press PLAY (NN) during easy review playback. VCR Operation (Continued) Normal Recording Preparation:
Turn on the power of both the DVD/CD/VCR Receiver and TV.
Tune the TV to the DVD/CD/VCR Receiver output channel
(CH 3 or 4) or set the TVs source selector to VIDEO.
If a direct VIDEO/AUDIO connection is made between the DVD/CD/VCR Receiver and the TV, set the TVs source selector to VIDEO. 11 Insert a video cassette with the safety tab intact. 22 Select the desired channel with CH/TRK(vv/VV).
If you are recording from another source via audio/video input jacks (at the Rear or Front panel), select LINE1(L1) or LINE2(L2) with INPUT. 33Set the desired recording speed (SP or SLP) with the SP/SLP button.
This DVD/CD/VCR Receiver is not designed to record in LP mode. 44 Set the MTS mode as desired (See page 18, 26). 55Press REC/ITR (zz) once. Recording will start. (The REC indicator will light in the display window.)
REC indicator appears only when the Output Source is set to VCR.
If a cassette with no safety tab is loaded, the cassette will be ejected automatically. 66Within 5 second, press STOP (xx) twice to stop recording. If the tape reaches the end before STOP (x) is pressed, the DVD/CD/VCR Receiver will automatically stop, rewind, eject the tape and turn itself off. To pause recording 1 Press PAUSE/STEP (X) to pause the tape during recording. The REC indicator will flash in the display window. 2 When you want to continue recording, press PAUSE/STEP (X) or REC/ITR (zz).
After 5 minutes in Pause mode, the tape will be stopped automatically to protect the tape and the video heads. To record one TV program while watching another 1 Use TV/VCR to select the TV mode during recording. TV MODE appears in the display window. 2 Using the TV, select the channel to be viewed. ips Always use PAUSE/STEP (X) for best results when making changes during recording. For example: To change channels during recording, first press PAUSE/STEP (X) to put the unit in pause mode. Select the desired channel on the DVD/CD/VCR Receiver, then press PAUSE/STEP (X) again to resume recording. Timer Recording This DVD/CD/VCR Receiver can be programmed to record up to 8 programs within a period of 1 year. For unattended recording, the timer needs to know the chan-
nels to be recorded and the starting and ending times. Things to know before starting
If you try to set the program timer before setting the clock, PLEASE SET THE CLOCK appears for a moment and then CLOCK menu appears on the TV screen. Set the time and date before proceeding.
Make sure a tape is in the DVD/CD/VCR Receiver and the safety tab is in place or the tape will be automatically ejected. I N O T A R E P O Preparation:
Turn on the power of both the DVD/CD/VCR Receiver and the TV.
Be sure the TV is set to the DVD/CD/VCR Receiver output channel (3 or 4).
Make sure the TUNING BAND in the TUNING menu is set appropriately (TV or CATV). 11 Press MENU and the MAIN menu will appear. 22 Use vv/VV to choose the PROGRAM menu. 33Press MEMORY/ENTER to go to the PROGRAM menu. The PROGRAM menu will appear.
If all 8 programs have been entered, FULLY PROGRAMMED message will appear for a moment and then PROGRAM 1 will appear on the TV screen. Use bb/BB to choose the desired day. Use bb/BB to choose the desired month. 44 Use bb/BB to choose the PROGRAM No. (1-8). 55Use VV to choose the MONTH option. 66Use VV to choose the DAY option. 77 Use VV to choose the START option. 88Use VV to choose the STOP option. 99Use VV to choose the CHANNEL option. Use bb/BB to choose the desired start time. Use bb/BB to choose the desired stop time. Use bb/BB to choose the desired channel
(Channel, LINE1(L1) or LINE2(L2)). Cable Users: If you have CABLE TV and used Cable Box in Connecting Antenna/Cable TV to DVD/CD/VCR Receiver (page 11), using a cable box converter, you must set the channel in this step to match the cable box output channel (usually CH 3 or 4). Change channels on the cable box instead of with the DVD/CD/VCR Receiver. 25 otes If the power fails or the DVD/CD/VCR Receiver is unplugged from the AC outlet, the correct clock time and timer settings are kept in memory for approximately 3 seconds. After 3 seconds, the clock and program timer must be reset when power is restored. Reset the clock according to instructions. After setting up a timer recording, recording will start if no other timer recordings are scheduled to occur at the same time (see Program Priority at right). Checking (Erasing) Timer Record Programming Programming can be checked whenever the DVD/CD/VCR Receiver is turned on. 1 Press MENU and the MAIN menu will appear. 2 Use v/V to choose the PROGRAM menu. Press MEMORY/ENTER and the PROGRAM menu will appear. 3 Use b/B to select a program you want to check or erase. If you want to erase the program, press CLEAR. 4 Press MENU to return to the TV screen. Program Priority If the starting and ending times of two or more timer recordings overlap on the same day, priority is given to the earliest recording. For example, in the diagram at left Program number 2 will not be recorded until Program number 1 is fin-
ished. The first part of Program number 2 will not be recorded. Likewise, Program number 3 will not be recorded until Program number 2 is finished, and so on. VCR Operation (Continued) 1100 Use VV to choose the SPEED option. Use bb/BB to choose the desired recording speed (AUTO, SP or SLP).
AUTO mode determines how much tape is left and switches speed from SP to SLP, if necessary, to complete recording the program. There will be some picture and sound distortion at the point of the speed change. 1111 Use VV to choose the REPEAT option. Use bb/BB to choose the desired repeat (ONCE, WEEKLY or DAILY). ONCE event....for recording up to 8 programs on a single day or over the days within a period of 1 year. WEEKLY event....for recording up to 8 programs on a certain day of every week. DAILY event....for recording up to 8 programs at the same time(s) Monday through Friday. ip If the input data is wrong, use vv to select the data and correct it using bb/BB. 1122 Press MENU, the program will be memorized by the DVD/CD/VCR Receiver.
TIMER indicator lights in the display window.
If the program preset time has past, the PAST TIME PROGRAMMED message will appear on the TV screen. Return to the incorrect program and program it with the correct time.
If you had entered a past date, timer recording will be performed on that date of the next year.
Additional programs may be entered by repeating steps 1-12. Cable Users: If your cable hookup is via a TV converter box, you can program multiple recordings only on the converter box output channel. This is because the converter determines what channel you view through your DVD/CD/VCR Receiver. ip If you are finished programming and you want to set the DVD/CD/VCR Receiver to record the programs you have entered, MAKE SURE YOU HAVE INSERTED A TAPE INTO THE DVD/CD/VCR Receiver. The DVD/CD/VCR Receiver is now set to record the preset programs. 26 I N O T A R E P O VCR Operation (Continued) Instant Timer Recording Instant Timer Recording allows you to make a recording easily of a preset length without using the programma-
ble timer. Preparation:
Turn on the power of both the DVD/CD/VCR Receiver and the TV.
Be sure the TV is tuned to the DVD/CD/VCR Receiver output Dubbing and Editing If you wish to edit or dub your camcorder (or another VCR) recordings to this DVD/CD/VCR Receiver, the rear (or Front) panel mounted Audio and Video (A/V) input jacks make the connections quick and easy. These direct A/V jacks will also provide better picture results than using the RF jack on the rear panel. channel (3 or 4).
If a direct VIDEO/AUDIO connection is made between the DVD/CD/VCR Receiver and the TV, set the TVs source selector to VIDEO. 11 Insert a video cassette with the safety tab intact. 22 Select the desired channel with vv/VV or number
(0-9). The channel number appears on the TV screen.
If you are recording from another source via audio/video input jacks (at the Rear or Front panel), select LINE1(L1) or LINE2(L2). with the SP/SLP button. The tape speed will appear on the TV screen. 33Select the desired recording speed (SP or SLP) 44 Press REC/ITR (zz) twice. 55Press REC/ITR (zz) repeatedly to select the The menu as illustrated, will appear on the TV screen.
Recording will start. (The TIMER indicator will light) recording time length. At the end of the recording, the DVD/CD/VCR Receiver will stop recording and shut off.
During Instant Timer Recording, changing the channel on the DVD/CD/VCR Receiver will not be possible.
You can stop the recording by pressing STOP (x) twice, within 5 seconds. INSTANT TIMER RECORD MENU INSTANT TIMER RECORD 0H30M ..... 9H00M 0H00M CHANNEL SPEED 2 SP START LENGTH NOW 0H30M Length Display
(each additional press of REC/ITR (zz) increases recording time 30 minutes) Checking the Recording Time Press REC/ITR (z) once to check the recording time. The recalled setting will automatically return to the TV screen after 6 seconds. To extend the Recording Time The recording time can be extended anytime by press-
ing REC/ITR (z). Subsequent presses result in advancing the recording time by 30-minute increments. otes
If you press PAUSE/STEP (X) during instant timer record-
ing, the DVD/CD/VCR Receiver will enter the recording pause mode. Instant timer recording is cancelled.
If the DVD/CD/VCR Receiver is set to 0H00M, the DVD/CD/VCR Receiver goes to normal recording mode. outputs to your DVD/CD/VCR Receiver as illustrated on page 12. 11 Connect the camcorders (or another VCRs) A/V 22 Select the input channel LINE2. (Use INPUT to select LINE2.)
If you have connected your DVD/CD/VCR Receiver to the A/V input jacks on the rear of DVD/CD/VCR Receiver, you should select the input channel LINE1(L1) by pressing INPUT twice. 33Play the tape in the camcorder (or another VCR). If you have a TV attached to your DVD/CD/VCR Receiver, you can see the video playing. 44 When you desire the recording to begin, press DVD/CD/VCR Receivers REC/ITR (zz) once to start. ote Before recording, please confirm the recording start position. Copying from DVD to VCR This unit is capable of copying the contents of a DVD to a VHS tape. ote If the DVD you are attempting to copy is copy protected, you will not be able to copy the disc. It is not permitted to copy Macrovision encoded DVDs. LOCK is displayed in the display window. Insert the disc you wish to copy in the DVD deck and close the disc tray. 11 Insert Disc 22 Insert VHS Tape 3Press COPY button on the unit front panel or Insert a blank VHS video tape into the VCR deck. press REC/ITR button on the remote control. The DVD will go into Play mode and the VCR will go into Record mode.
If the DVD disc menu appears, you may need to press PLAY PLAY (NN) manually to begin copying.
COPY indicator will light. 44 Stopping the Copy Process When the DVD is finished playing, press the VCR button on the remote control and then press STOP (x) twice to end copying within 5 seconds. You must stop the Copy process manually when the DVD movie ends, or the unit may replay and record over and over again. ote When you stop the DVD playback during copying, VCR recording mode also stops automatically. You must set Progressive Scan to Off to copy process. VCR Operation (Continued) VHS Hi-Fi Stereo System/
MTS Broadcast This DVD/CD/VCR Receiver is equipped with the VHS Hi-Fi audio sound system for recording and playback. The information below gives a brief description of Hi-Fi audio and how to record and play a tape in the Hi-Fi audio mode. Playback with Hi-Fi Stereo Audio Sound A stereo TV with AUDIO/VIDEO input jacks or a stereo audio system is required for true stereo playback. To experience the full and rich stereo sound available with Hi-Fi recorded tapes, we recommend the connection of this unit to a home stereo audio system. 11 Set the AUDIO MODE option to HI-FI on the SETUP menu . 22 Set the AUDIO OUTPUT option to STEREO position.
(STEREO) POSITION: The left channel sound (L) is heard from the left speaker and the right channel sound
(R) is heard from the right speaker.
(LEFT) POSITION: The left channel sound (L) is heard from both speakers.
(RIGHT) POSITION: The right channel sound (R) is heard from both speakers. 33Press MENU. 44 Insert a cassette and press PLAY (NN). Adjust volume at your stereo system. 28 MTS (Multi-Channel TV Sound) This DVD/CD/VCR Receiver will decode MTS stereo and bilingual (SAP) off-the-air broadcast sound signals. It also decodes stereo TV sound from local cable com-
panies, as long as they operate on assigned cable fre-
quencies and use the EIA-recommended MTS stereo/bilingual TV sound system. Multichannel TV Sound Indicator (MTS) Shows onscreen as illustrated below when MEMORY/ENTER is pressed.
One or both of the indicators will light, depending on the MTS broadcast. TV screen CH 4 STEREO/SAP STEREO Lights up when a stereo broadcast is being received. SAP Lights up when a SAP BILINGUAL broadcast is being received. If only STEREO appears on the TV screen. The DVD/CD/VCR Receiver can record in stereo onto the VHS Hi-Fi audio tracks when the BROADCAST TYPE option is in the STEREO position. The DVD/CD/VCR Receiver will also record mono audio onto the mono audio track. If only SAP appears on the TV screen. Set the BROADCAST TYPE option to SAP. If STEREO/SAP appears on the TV screen Use the BROADCAST TYPE option to select the desired recording mode (STEREO or SAP). SAP (Second Audio Program) Recording Some stations transmit a Second Audio Program, which is used for a second language or additional information. When the station broadcasts a Second Audio Program, follow the procedure below to record the SAP. 11 Insert a video cassette with the safety tab intact. 22 Set the BROADCAST TYPE option to SAP
(SETUP menu). Do this if only the SAP appears on the TV screen or you know the program will use the SAP. with the SP/SLP button. 33Press MENU. 44 Select the desired recording speed (SP or SLP) 55Select the desired channel. SAP should appear 66Press REC/ITR (zz) once 77 Within 5 seconds, press STOP (xx) twice to stop You are now recording the program you see and hear on the TV. on the TV screen. recording. VCR Operation (Continued) Tape Counter Memory Feature Real-Time Counter Shows length of tape run in hours, minutes, and seconds. Press CLK/CNT to select the real-time counter display. Every press of CLK/CNT changes the TV screen as illustrated below. 2:15 AM 0:05:25 CLOCK COUNTER REM 1:07 REMAINING TIME
Counter changes to 0:00:00 when the cassette is ejected.
The real-time counter does not operate if nothing is recorded on the tape.
The real-time counter will not work unless a tape is inserted. Counter Memory Feature This is useful if there is a section of tape you want to view immediately after recording or if you want to return to the same point several times. real-time counter on the TV screen. the real-time counter to 0:00:00 by pressing CLEAR. 11 Begin recording or playing a tape. 22 Press CLK/CNT repeatedly to display the 33At the point that you want to locate later, reset 44 Continue to play or record. 55Press STOP (xx) when recording or playback 66Press BACKWARD (..). The tape automatically stops when the tape counter returns to about 0:00:00. finishes. Tape Remaining This function shows the remaining time on the tape during recording or playback. Press CLK/CNT repeatedly until the REM indicator appears on the TV screen during recording or playback. ote The remaining tape length indicator may not be displayed correctly depending on the condition of the tape and the kind of the tape (T-140, T-160, or T-210 etc) Additional Information
In manual recording, Timer recording, Instant Timer Recording, playback, or fast forward modes, the DVD/CD/VCR Receiver automatically starts rewinding the tape at the end of the tape. The cassette will stop at the beginning of the tape and be ejected, and the DVD/CD/VCR Receiver will turn itself off.
After you have finished using the DVD/CD/VCR Receiver, rewind, eject, and remove the cassette. Place the cassette in its protective sleeve to protect it from dust. It is not nec-
essary to rewind the cassette before removing it, but if you do, it will be ready to play or record the next time you use it.
Be sure the DVD/CD/VCR Receiver Channel Selector is on the correct channel you wish to record. The channel that is being recorded can always be checked by tuning the televi-
sion to the DVD/CD/VCR Receiver channel (3 or 4) and pressing the TV/VCR button to set the DVD/CD/VCR Receiver to VCR mode (VCR MODE appears in the display window).
Do not attempt to hook up more than one television set to the DVD/CD/VCR Receiver for either recording or playback. I N O T A R E P O Auto Play System This DVD/CD/VCR Receiver features automatic play-
back. Load a cassette (with the safety tab removed).
The Output Source is changed to VCR mode automatically.
The power turns on automatically and playback begins.
At the end of the tape, the DVD/CD/VCR Receiver stops and rewinds the tape.
The cassette is ejected after rewinding and the VCR turns itself off automatically. AUTO PLAY AUTO REWIND AUTO EJECT AUTO POWER OFF LOAD TAPE ote Auto power off does not function during regular DVD play mode. (DVD/CD/VCR Receiver power stays on.) S-VHS Quasi Playback (SQPB)
This DVD/CD/VCR Receiver can play back S-VHS recorded tapes, however, it cannot make recordings using S-VHS format tapes.
SQPB is an abbreviation for S-VHS Quasi Playback. 29 DVD and Video CD Operation Playing DVDs and Video CD General Features Playback Setup DVD VCD2.0 VCD1.1
Turn on the TV and select the video input source con-
nected to the DVD/CD/VCR Receiver.
Audio system: Turn on the audio system and select the input source connected to the DVD/CD/VCR Receiver.
Set the Output Source to DVD as shown in Selecting the Viewing Source on page 6. 11 Press OPEN/CLOSE (ZZ) to open the disc tray. 22 Load your chosen disc in the tray, with the label facing up. When a double-sided DVD is inserted, make sure the side you want to play is facing down. 33Press OPEN/CLOSE (ZZ) to close the tray. READING appears in the display window, and playback starts automatically. If playback does not start, press PLAY (NN). In some cases, the disc menu might appear instead. If a menu screen is displayed A menu screen may appear automatically after loading a DVD. DVD Use b/B/v/V buttons to select the title/chapter you want to view, then press MEMORY/ENTER to start playback. Press TITLE or DISC MENU to return to the menu screen. VCD2.0
Use the number buttons to select the track you want to view. Press RETURN to return to the menu screen.
Menu setting and the exact operating procedures for using the menu may differ depending on the disc. Follow the instructions on the each menu screen. You also may set PBC to Off under setup. See page 22. otes
If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit password must be entered and/or the disc must be authorized
(see Parental Control, on page 23).
DVDs may have a Region Code.
Your DVD/CD/VCR Receiver will not play discs that have a Region Code different from your DVD/CD/VCR Receiver. The Region Code for this DVD/CD/VCR Receiver is 1 (one).
Do not keep a fixed image displayed on the screen for a long time. 30 ote Unless stated otherwise, all operations described use the remote control. Some features may also be available on the Setup menu. Selecting Other TITLEs If a disc has more than one title, you can select another title as follows:
Press DISPLAY in Stop mode, then press the DVD 1 /3 appropriate number buttons (0-9) then use MEMO-
RY/ENTER to select a title number. Selecting Other CHAPTERs/TRACKs DVD VCD2.0 VCD1.1 1 /12 1 /3 If a title on a disc has more than one chapter or a disc has more than one track, you can move to another chapter/track as follows:
Press BACKWARD (.) or FORWARD (>) briefly during playback to return to the beginning of the current chapter/track or to select the next chapter/track.
Press BACKWARD (.) twice briefly to step back to the previous chapter/track.
To go directly to any chapter during playback, press DISPLAY. Use vv/VV to select Chapter/track icon. Then, enter the chapter/track number with the number buttons (0-9). Then, press MEMORY/ENTER. Note For two-digit numbers, press the numbered buttons
(0-9)in rapid succession. Slow Motion 1 Press PAUSE/STEP (X) during playback. VCD1.1 VCD2.0 DVD The DVD/CD/VCR Receiver will now go into PAUSE mode. 2 Press BACKWARD (.) or FORWARD (>) during pause mode. The DVD/CD/VCR Receiver will enter SLOW mode. 3 Use BACKWARD (.) or FORWARD (>) to select the required speed: t 1/16, t 1/8, t 1/4, t 1/2 (backward), or T 1/16, T 1/8, T 1/4, T 1/2
(forward). 4 To return to playback, press PLAY (NN). Note Slow motion playback in reverse is not applicable for Video CD. Still Picture and Frame-by-Frame Playback DVD VCD1.1 VCD2.0 1 Press PAUSE/STEP (X) during playback. The DVD/CD/VCR Receiver will go into PAUSE mode. 2 With a DVD, you can advance the picture frame by frame by pressing PAUSE/STEP (X) repeatedly on the remote control. 3 To return to playback, press PLAY (NN). DVD Operation (Continued) General Features (Continued) Search 1 Press and hold BACKWARD (.) or FORWARD (>) VCD1.1 VCD2.0 DVD for about two seconds during playback. The DVD/CD/VCR Receiver will now go into SEARCH mode. 2 Press and hold BACKWARD (.) or FORWARD (>) repeatedly to select the required speed: mX2, mX4, mX16, mX100 (backward) or MX2, MX4, MX16, MX100 (forward). With a Video CD, the Search speed changes: mX2, mX4, mX8, (backward) or MX2, MX4, MX8,
(forward). 3 To return to playback, press PLAY (NN). Random 1 Press RANDOM during playback or in Stop mode. Karaoke DVD VCD1.1 VCD2.0 The unit automatically begins Random Playback and RANDOM appears on the TV screen. 2 To return to normal playback, press RANDOM until NORMAL appears on the TV screen. ips By pressing BACKWARD (.) or FORWARD (>) during Random playback, the unit selects another title
(track) and resumes Random playback. ote
This function only works with DVD Karaoke discs.
On a Video CD with PBC, you must set PBC to Off on the setup menu to use the Random function. See page 22. Repeat VCD1.1 VCD2.0 DVD CHAPT TITLE TRACK ALL OFF DVD Video Discs - Repeat Chapter/Title/Off 1 To repeat the currently playing chapter, press REPEAT. The Repeat Chapter icon appears on the TV screen. 2 To repeat the title currently playing, press REPEAT a second time. The Repeat Title icon appears on the TV screen. 3 To exit Repeat mode, press REPEAT a third time. The Repeat Off icon appears on the TV screen. Video CDs - Repeat Track/All/Off 1 To repeat the track currently playing, press REPEAT. The Repeat Track icon appears on the TV screen. 2 To repeat the disc currently playing, press REPEAT a second time. The Repeat All icon appears on the TV screen. 3 To exit Repeat mode, press REPEAT a third time. The Repeat Off icon appears on the TV screen. Note On a Video CD with PBC, you must set PBC to Off on the setup menu to use the Repeat function. See page 22. Repeat A-B To repeat a sequence in a title:
1 Press A-B at your chosen start point. DVD A B A *
OFF I N O T A R E P O A * appears briefly on the TV screen. 2 Press A-B again at your chosen end point. A B appears briefly on the TV screen, and the repeat sequence begins. 3 To cancel the sequence, press A-B. DVD Time Search The Time Search function allows you to start playing at any chosen time on the disc. 1 Press DISPLAY during playback. The on-screen dis-
0:16:57
play appears on the screen. The Time Search box shows the elapsed playing time of the current disc. 2 Within 10 seconds, use vv/VV to select the Time Search icon in the on-screen display. The -:--:-- appears in the Time Search box. 3 Within 10 seconds, use the numbered buttons to enter the required start time. Enter hours, minutes and seconds from left to right in the box. If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then enter the correct numbers. 4 Within 10 seconds, press MEMORY/ENTER. Playback starts from the selected time on the disc. If you enter an invalid time, playback will continue from the current point. 3D Surround DVD VCD2.0 VCD1.1 BYPASS 3D SUR This unit can produce a 3D Surround effect, which simulates multi-channel audio playback from two conventional stereo speakers, instead of the five or more speakers normally required to listen to multi-
channel audio from a home theater system. 1 Press SOUND MODE to select 3D SUR during playback. 2 To turn off the 3D Surround effect, press SOUND MODE again to select BYPASS. DVD VCD2.0 Zoom The Zoom function allows you to enlarge the video image and to move through the enlarged image. 1 Press ZOOM during playback or still playback to acti-
VCD1.1 vate the Zoom function. If you press ZOOM repeatedly, the magnification level increases up to six steps. 2 Use b/B/v/V buttons to move through the zoomed picture. 3 Press CLEAR to resume normal playback or return to the paused image. otes
The Zoom function may not work with some DVDs.
The Zoom function may not work with some multi-angle scenes. 31 DVD Operation (Continued) General Features (Continued) Marker Search VCD1.1 VCD2.0 DVD 1/9 MARKER SEARCH You can start playback from a memorized point. Up to nine points can be memorized. To enter a mark, follow these steps. 1 During disc playback, press MARKER when playback reaches the spot that you want to memorize. The Marker icon will appear on the TV screen briefly. 2 Repeat step 1 to enter up to nine Marker points on a disc. To Recall a Marked Scene 1 During disc playback, press SEARCH. 2 Within 10 seconds, use 1/2 or number button to select a Marker number that you want to recall. The Marker Search menu will appear on the screen. 3 Press MEMORY/ENTER. Playback will start from the Marked scene. 4 To remove the MARKER SEARCH menu, press SEARCH. To Clear a Marked Scene 1 During disc playback, press SEARCH. The Marker Search menu will appear on the screen. 2 Within 10 seconds, use 1/2 or number button to select a Marker number that you want to erase. 3 Press CLEAR. The Marker number will be erased from the list. 4 Repeat steps 2 and 3 to erase additional Marker numbers. 5 To remove the MARKER SEARCH menu, press SEARCH.
All markers are erased when the disc is ejected. Changing Video Mode
With certain discs, the playback picture may be flick-
DVD ering or Dot Crawl is shown on straight lines. That means Vertical interpolation or De-interlace is not perfectly matched with the disc. In this case, the picture quality may be improved by changing the video mode.
To change the video mode, press and hold DISPLAY about 3 seconds during disc playback. The new video mode number selected is displayed on the TV screen. Check whether the video quality has improved. If not, repeat the above procedure until pic-
ture quality is improved.
Video mode sequence:
MODE1 MODE2 MODE3 MODE1
If you turn off the power, the video mode will return to initial default state (MODE1). Detailed Description of each Video Mode MODE1 : The source material of the DVD video (film materi-
al or video material) is determined from disc information. MODE2 : Suitable for playing film based content or video based material recorded by the progressive scan method. MODE3 : Suitable for playing video based content with comparatively little motion. 32 ote The video mode setting only works when the Progressive Scan mode is set to On in the Setup menu. Special DVD Features Checking the contents of DVD Video discs: Menus DVDs may contain menus that allow you to access spe-
cial features. To use the disc menu, press DISC MENU. Then, press the appropriate number button to select an option. Or, use b/B/v/V buttons to highlight your selec-
tion, then press MEMORY/ENTER. Title Menu 1 Press TITLE. DVD If the current title has a menu, the menu will appear on the screen. Otherwise, the disc menu may appear. 2 The menu can list camera angles, spoken language and subtitle options, and chapters for the title. 3 To remove the title menu, press TITLE again. Disc Menu DVD 1 Press DISC MENU. The disc menu is displayed. 2 To remove the disc menu, press DISC MENU again. DVD Camera Angle If the disc contains sequences recorded from different camera angles, the angle icon blinks on the TV screen. You can then change the camera angle if you wish.
Press ANGLE repeatedly during playback to select a 1 /1 desired angle. The number of the current angle appears on the display. Changing the Audio Language DVD 1 ENG D 5.1 CH Press AUDIO repeatedly during playback to hear a different audio language or audio track. DVD Subtitles Press SUBTITLE repeatedly during playback to see the different subtitle languages. 1 ENG ABC ote appears, the feature at that moment or with that If specific DVD. Screen Saver The screen saver picture appears when you leave the DVD/CD/VCR Receiver in Stop mode for about five minutes. Audio CD and MP3/WMA Disc Operation Playing Audio CDs and MP3/WMA Discs CD MP3 WMA The DVD/CD/VCR Receiver can play MP3/WMA format-
ted recordings on CD-ROM, CD-R or CD-RW discs. Before playing MP3/WMA recordings, read the notes on MP3/WMA Recordings on right. 11 Insert a disc and close the tray. Audio CD: Audio CD menu appears on the TV screen go to step 4. MP3/WMA disc: The MP3/WMA-JPEG choice menu appears on the TV screen. Go to step 2 MP3 WMA JPEG 22 Use 33/44 to select the MP3/WMA then press MEMORY/ENTER. The MP3/WMA menu appears on the TV screen. Press RETURN to move to the MP3/WMA-JPEG choice menu. MP3 WMA Program Folder1 Folder2 Folder3 Folder4 Folder5 Folder6 Folder7 Folder8 00:00 Clear All OFF A list of files in the folder appears. 33 Use 33/44 to select a folder, and MEMORY/ENTER. 44 Use 33/44 to select a track then press PLAY (NN) or MEMORY/ENTER. Playback starts. During playback, the current tracks elapsed playing time will appear on the display window and menu. Playback will stop at the end of the disc. Press TITLE to move to the next page. Press DISC MENU to move to the previous page. CD Program MP3 WMA Program TRACK01 TRACK02 TRACK03 TRACK04 TRACK05 TRACK06 TRACK07 TRACK08 FILE 1 FILE 2 FILE 3 FILE 4 FILE 5 FILE 6 FILE 7 FILE 8 Clear All Clear All 0: 56: 18 STER. BYPASS 00:00 1 OFF Audio CD Menu MP3/WMA Menu ip If you are in a file list and want to return to the Folder list, use the 33/44 to highlight MEMORY/ENTER to return to the previous menu screen. and press 55 To stop playback at any other time, press STOP (xx). MP3/WMA Recording Notes About MP3
An MP3 file is audio data compressed by using the MPEG1 audio layer-3 file-coding scheme. We call files that have the .mp3 file extension MP3 files.
The player can not read an MP3 file that has a file extension other than .mp3. About WMA (Window Media Audio) Files
An WMA file is a Microsoft audio compression technology.
WMA(Windows Media Audio) offers double the audio compression of the MP3 format. I N O T A R E P O MP3/WMA Disc compatibility with this player is limited as follows:
1. Sampling Frequency / only at 44.1kHz (MP3), 22.05 - 44.1kHz (WMA) 2. Bit rate / within 32 - 320kbps (MP3), 32 - 128kbps (WMA) 3. CD-R physical format should be ISO 9660 4. If you record MP3/WMA files using the software which cannot create a FILE SYSTEM, for example Direct-CD etc., it is impossible to playback MP3/WMA files. We recommend that you use Easy-
CD Creator, which creates an ISO9660 file system. 5. A single session disc requires MP3/WMA files in the first track. If there is no MP3/WMA file in the 1st track, it cannot playback MP3/WMA files. If you wish to playback MP3/WMA files, format all the data in the disc or use a new one. 6. File names should be named using 8 letters or less and must incorporate .mp3 or .wma extension e.g. ********.MP3 or ********.WMA. 7. Do not use special letters such as / : * ? < > etc. 8. Total number of files on the disc should be less than 650. This DVD/CD/VCR Receiver requires discs/recordings to meet certain technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are auto-
matically set to these standards. There are many differ-
ent types of recordable disc formats (including CD-R containing MP3 or WMA files). That require certain pre-
existing conditions (see above) to insure compatible playback. Customers should also note that permission is required in order to download MP3/WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner. 33 Audio CD and MP3/WMA Disc Operation (Continued) CD Repeat A-B To repeat a sequence. 1 During disc playback, press A-B at your chosen start-
ing point. The Repeat icon and A * appears on the menu screen. 2 Press A-B again at your chosen end point. The Repeat icon and A B appears on the menu screen, and the sequence begins to play repeatedly. 3 To exit the sequence and return to normal play, press A-B again. The Repeat icon and OFF appears on the menu screen. CD 3D Surround This unit can produce a 3D Surround effect, which simulates multi-channel audio playback from two conventional stereo speakers, instead of the five or more speakers normally required to listen to multi-
channel audio from a home theater system. 1 Press SOUND MODE to select 3D SUR during playback. 2 To turn off the 3D Surround effect, press SOUND MODE again to select BYPASS. Changing the Audio Channel Press AUDIO repeatedly during playback to hear a different audio channel (STER., LEFT, or RIGHT). CD CD MP3 Pause 1 Press PAUSE/STEP (X) during playback. 2 To return to playback, press PLAY (NN) or press WMA PAUSE/STEP (X) again. Selecting other Tracks
Press BACKWARD . or FORWARD > briefly WMA MP3 CD during playback to go to the next track or to return to the beginning of the current track.
Press BACKWARD . twice briefly to step back to the previous track.
On Audio CDs, to go directly to any track, enter the track number using the numbered buttons (0-9) dur-
ing playback. Repeat Track/All/Off 1 To repeat the track currently playing, press REPEAT. WMA MP3 CD The Repeat icon and TRACK appears on the menu screen. 2 To repeat all tracks on a disc, press REPEAT a sec-
ond time. The Repeat icon and ALL appears on the menu screen. 3 To cancel Repeat mode, press REPEAT a third time. The Repeat icon and OFF appears on the menu screen. Search 1 Press and hold BACKWARD . or FORWARD >
WMA MP3 CD for about two seconds during playback. The player will now go into SEARCH mode. 2 Press and hold BACKWARD . or FORWARD >
repeatedly to select the required speed: mX2, mX4, mX8 (backward) or MX2, MX4, MX8
(forward). Search speed and direction are indicated on the menu screen. 3 To exit SEARCH mode, press PLAY (NN). Random 1 Press RANDOM during playback or in Stop mode. WMA MP3 CD The unit automatically begins Random Playback and RANDOM or RAND. appears on the display window and menu screen. 2 To return to normal playback, press RANDOM repeat-
edly until RANDOM or RAND. disappears from the display window and menu screen. 34 JPEG File Operation Viewing JPEG Files on a Disc This DVD/CD/VCR Receiver can play discs with JPEG files. Before playing JPEG files, read the notes on JPEG Files on right. JPEG 1 Insert a disc and close the tray. The MP3/WMA-JPEG choice menu appears on the TV screen. MP3 WMA JPEG 22 Use 33/44 to select the JPEG then press MEMO-
RY/ENTER. The JPEG menu appears on the TV screen. JPEG Folder1 Folder2 Folder3 Folder4 Folder5 Folder6 Folder7 Folder8 Slide Speed Off 33 Use 33/44 to select a folder, and MEMORY/ENTER. A list of files in the folder appears. Press RETURN to move to the MP3/WMA-JPEG choice menu. ip If you are in a file list and want to return to the Folder list, use the 34 buttons on the remote to highlight and press MEMORY/ENTER to return to the previous menu screen. 44 If you want to view a particular file, use 33/44 to highlight the file and press MEMORY/ENTER or PLAY (NN). Viewing the file function starts. While viewing a file, press RETURN to move to the previous menu (JPEG menu). Press TITLE to move to the next page. Press DISC MENU to move to the previous page. JPEG Folder1 Picture1 Picture2 Picture3 Picture4 Picture5 Picture6 Picture7 5/32 1024X768 Slide Speed Off 5/32 1024X768 Picture5.jpg ip There are three viewing Slide Speed options: Fast, Normal, Slow, and Off. Use 1/2 to highlight the Slide Speed then use 3/4 to select the option you want to use, and press MEMORY/ENTER. 55To stop viewing at any other time, press STOP (xx). The JPEG menu appears. Selecting other Files Press BACKWARD . or FORWARD > once while viewing a picture to advance to the next file or to the previous file. Still Picture 1 Press PAUSE/STEP (X) during slide show. The player will now go into PAUSE mode. 2 To return to the slide show, press PLAY (NN) or press PAUSE/STEP (X) again. I N O T A R E P O To flip the picture Press 33/44 while showing a picture to flip the picture horizontally or a vertically. To rotate picture Press 1/2 while showing a picture to rotate the picture clockwise or counter clockwise. Notes on JPEG Files
Depending upon the size and number of the JPEG files, it could take a long time for the DVD player to read the discs contents. If you dont see an on-
screen display after several minutes, some of the files are too big reduce the resolution of the JPEG files to less than 2 mega pixels and burn another disc.
Total number of files and folders on the disc should be less than 650.
Some disc may be incompatible due to different recording format or condition of disc.
When you are using software such as Easy CD Creator to burn the jpeg files into the CD-R, ensure that all the selected files have the .jpg extensions when copying into the CD layout.
If the files have .jpe or .jpeg extensions, please rename them as .jpg files.
File names without .jpg extension will not be able to be read by this DVD/CD/VCR Receiver, even though the files are shown as JPEG image files in windows explorer. 35 Programmed Playback CD VCD2.0 VCD1.1 MP3 WMA Programmed Playback with Audio CDs and MP3/WMA Discs The Program function enables you to store your favourite tracks from any disc in the player memory. Program can contain 30 tracks. Programmed Playback with Video CDs ote On a Video CD with PBC, you must set PBC to Off on the setup menu to use the Program function. See page 22. 11 Press PROGRAM during playback or in the stop mode to enter the Program Edit mode. The mark will appear to the right of the word Program on the right side of the menu screen. E ote Press PROGRAM to exit the Program Edit mode;
the mark will disappear. E selected track on the Program list. 22 Select a track, then press ENTER to place the 33Repeat step 2 to place additional tracks on the Program list. Audio CD menu MP3/WMA menu CD Program E MP3 WMA Program E TRACK 1 TRACK 2 TRACK 3 TRACK 4 TRACK 5 TRACK 6 TRACK 7 TRACK 8 TRACK 12 TRACK 8 TRACK 10 TRACK 3 Clear All FILE 1 FILE 2 FILE 3 FILE 4 FILE 5 FILE 6 FILE 7 FILE 8 FILE 8 FILE 2 FILE 4 FILE 3 Clear All 0: 56: 18 STER. BYPASS 00:00 3 OFF The programmed track you selected last is highlighted on the program list. 44 Press 2. 55Press 33/44 to select the track you want to start playing. Press TITLE to move to the next page. Press DISC MENU to move to the previous page. 66Press PLAY or ENTER to start. Playback begins in the order in which you programmed the tracks and PROG. appears on the menu screen. Playback stops after all of the tracks on the Program list have played once. 77 To resume normal playback from programmed playback, press PROGRAM. Select a track of CD (or MP3/WMA) list and then press ENTER or PLAY. PROG. indicator disappears in the display window. 36 11 Insert Video CD and close the tray. 22 Press PROGRAM while playback is stopped. The VCD Program menu will appear. VCD Program E TRACK 1 TRACK 2 TRACK 3 TRACK 4 TRACK 5 TRACK 6 TRACK 7 TRACK 8 Clear All ote Press RETURN, PROGRAM or PLAY to exit the Program menu. Audio CD and MP3/WMA disc on left. 33Follow steps 2-6 of Programmed Playback with 44 To resume normal playback from programmed playback, press PROGRAM. PROG. indicator disappears in the display window. Repeat Programmed Tracks
To repeat the track currently playing, press REPEAT. The Repeat icon and TRACK appears on the menu screen.
To repeat all tracks on the program list, press REPEAT a second time. The Repeat icon and ALL appears on the menu screen.
To cancel Repeat mode, press REPEAT a third time. The Repeat icon and OFF appears on the menu screen. Erasing a Track from Program List 1 Press PROGRAM during playback (Audio CD and MP3/WMA disc only) or stop to enter the Program Edit mode. The mark will appear. 2 Press 2 to move to the Program list. 3 Use 33/44 to select the track that you wish to erase E from the Program list. 4 Press CLEAR. The track will be erased from the Program list. Erasing the whole Program List 1 Follow steps 1-2 of Erasing a Track from Program List as above. 2 Use 33/44 to select Clear All, then press ENTER. The complete Program for the disc will be erased. The programs are also cleared when the disc is removed. Speaker Setup Adjust the following settings for the built-in 5.1 channel surround decoder. Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect Menu Language Progressive Scan 5.1 Speaker Setup Others R R Front L Volume 0 dB Size Small Distance 1 ft Test Return button. buttons on the setup menu. 11 Select 5.1 Speaker Setup using the 33/44 22 While 5.1 Speaker Setup is selected, press 2 33Press 22 buttons to select the desired speaker. 44 Adjust options by using 334411 22 buttons. Speaker selection Select a speaker that you want to adjust. ((Front speak-
ers (Left), Front speakers (Right), Centre Speaker, Rear speakers (Left), Rear speakers (Right), or Subwoofer)) ote Certain speaker settings are prohibited by the Dolby Digital licensing agreement. Volume Press 11 / 22 to adjust the output level of the selected speaker. (-6dB ~ 6dB) Size Since the speaker settings are fixed, you cannot change the settings.
Subwoofers size is fixed Large and the other speakers size are fixed small. Distance If you connected speakers to your DVD/CD receiver , setting the Distance lets the speakers know how far the sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the listener at the same time. (1 ft = 30.48 cm) ote You can not set the distance of subwoofer speaker. Test Press MEMORY/ENTER to test the signals of each speaker. Adjust the volume to match the volume of test signals memorized in the system.
Front Left (L) Front Right (R) Centre Rear Left (L) Rear Right (R) Subwoofer Return Press MEMORY/ENTER to return to the previous menu. I N O T A R E P O 37 Radio Operation Presetting the Radio Stations You can preset 30 stations for FM and AM. Before tun-
ing, make sure that you have turned down the volume. 11 Press FM/AM on the remote control or on the front panel until the frequency band appears on the display and TV screen.
- - - - - - - RADIO - - - - - - - 1/6. FM 87 . 7MHz FM 108 . 0MHz FM 90 . 7MHz FM 106 . 7MHz FM 98 . 7MHz FM/AM MEMORY/CLEAR TUNING 22 Press 33/44 on the remote control to find your desired station.
- - - - - - - RADIO - - - - - - - 2/6. FM 87 . 7MHz FM/AM TUNING Listening to the Radio Preset radio stations in the DVD/CD/VCR Receiver memory first (see Presetting Radio Stations on the left). 11 Press FM/AM on the remote control or on the front panel until the frequency band appears on the display and TV screen. The last received station is tuned in. 22 Press 33/44 on the remote control repeatedly to select the preset station you want. Each time you press the button, the DVD/CD/VCR Receiver tunes in one preset station at a time. 33Adjust the volume by rotating VOLUME on the front panel or by pressing VOLUME + or - on the remote control repeatedly. To Clear the Stored Radio Stations 11 Press FM/AM on the remote control or on the front panel until the frequency band appears on the display and TV screen. front panel to select the desired band. 33Press FM/AM on the remote control or on the 44 Hold down 44 TUNING 33 on the front panel or hold down 44 TUNING 33 on the remote control for 1 or 2 seconds, and a station is searched for automatically.
- - - - - - - RADIO - - - - - - - 1/6. FM 87 . 7MHz FM 108 . 0MHz FM 90 . 7MHz FM 106 . 7MHz FM 98 . 7MHz FM/AM MEMORY/CLEAR TUNING
- - - - - - - RADIO - - - - - - - 2/6. FM 87 . 7MHz FM 108 . 0MHz FM/AM MEMORY/CLEAR TUNING 5Press MEMORY/ENTER on the remote control. 66Repeat steps 2 to 5 to store other stations. 22 Press 33/44 on the remote control to select your desired station.
- - - - - - - RADIO - - - - - - - 2/6. FM 87 . 7MHz FM 108 . 0MHz FM/AM MEMORY/CLEAR TUNING 33Press CLEAR the remote control to clear the stored radio station.
- - - - - - - RADIO - - - - - - - 2/6. FM 87 . 7MHz FM/AM TUNING ote
While record or record pause mode, the CLEAR function may not be operated. 38 Operation with Radio (Continued) Tuning into a Station Manually 11 Press FM/AM on the remote control or on the front panel until the frequency band appears on the display and TV screen. front panel to select the desired band. 22 Press FM/AM on the remote control or on the 33Press 44 TUNING 33 on the front panel or press 44 TUNING 33 on the remote control to tune in the desired station. For your reference To turn off the radio Press POWER to turn the DVD/CD/VCR Receiver off or select another function mode (DVD, VCR, or AUX). To improve reception Realign the antenna. Tuning into a Station Automatically Hold down 4 TUNING 3 on the front panel or hold down 4 TUNING 3 on the remote control for 1 or 2 seconds, and a station is searched for automatically. ote
The search may not stop at a station with a very weak signal. Mute Press MUTE to mute your unit. You can mute your unit in order, for example, to answer the telephone, MUTING indicator in the display win-
dow. I N O T A R E P O 39 Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Symptom Cause No power.
The power cord is disconnected. The power is on, but the DVD/CD/VCR Receiver does not work. No picture.
No disc is inserted.
No tape is inserted.
The TV is not set to receive DVD/CD/VCR Receiver signal output.
TV/VCR mode for DVD/CD/VCR Receiver is set to TV.
The video cable is not connected securely. Solution
Plug the power cord into the wall outlet securely.
Insert a disc or tape. (Check that the disc or tape indicator in the display window is lit.)
Select the appropriate video input mode on the TV so the picture from the DVD/CD/VCR Receiver appears on the TV screen.
Press the TV/VCR button on the remote control repeatedly to choose VCR mode. VCR indicator light appears in the display window.
Connect the video cable securely. No sound.
The connected TV power is turned off.
The equipment connected with the audio cable is not set to receive DVD/CD/VCR Receiver signal output.
Turn on the TV.
Select the correct input mode on the audio receiver so you can listen to the sound from the DVD/CD/VCR Receiver.
The audio cables are not connected securely.
Connect the audio cable securely.
The power of the equipment connected with the audio cable is turned off.
Turn on the equipment connected with the audio cable. The playback picture is poor.
The audio connecting cord is damaged.
The disc is dirty.
Tape heads are dirty.
Tape is a rental or was recorded on another VCR. The DVD/CD/VCR Receiver does not start playback.
No disc is inserted.
No tape is inserted.
Replace it with new one.
Clean the disc.
Clean video heads.
Use CH/TRK (v/V) for manual tracking adjustment while tape is playing.
Insert a disc or tape. (Check that the disc or tape indicator in the display window is lit.)
An unplayable disc is inserted.
The disc is placed upside down.
The disc is not placed within the guide.
Insert a playable disc. (Check the disc type, color system, and Regional code.)
Place the disc with the playback side down.
Place the disc on the disc tray correctly inside the guide.
The disc is dirty.
The Rating level is set.
Clean the disc.
Cancel the Rating function or change the rating level. 40 Troubleshooting (Continued) Symptom Some channels are skipped over when using CH/TRK (v/V) Picture and sound of broadcasting channel are weak or missing. Camcorder image is not shown. Camcorder image via A/V input to DVD/CD/VCR Receiver is not shown on TV screen. Timer recording is not possible. Stereo Audio Record and/or Playback is not present. Cause Solution
Those channels were deleted with the CH. ADD/DEL option.
Use CH. ADD/DEL to restore channels. See Channel Selection on page 18.
Antenna or cables are loose.
Tighten connections or replace cable.
Wrong CHANNEL SOURCE option is being used.
Camcorder is off.
Try all CHANNEL SOURCE options. See Channel Selection on page 18 for details.
Turn camcorder on and operate properly.
DVD/CD/VCR Receiver INPUT SELECT is not set to LINE1(L1) or LINE2(L2).
Use INPUT to select LINE input channel
(LINE1(L1) or LINE2(L2)). E C N E R E F E R
Clock in DVD/CD/VCR Receiver is not set to correct time.
Set clock to correct time. See Setting the Clock on page 19.
Timer has been programmed incorrectly.
Reprogram Timer. See Timer Recording on pages 25 and 26.
TIMER indicator light does not appear after programming timer.
Reprogram Timer and turn DVD/CD/VCR Receiver off to enable timer.
TV is not Stereo-compatible.
Broadcast program is not in stereo for-
mat.
DVD/CD/VCR Receiver A/V Out jacks are not connected to TV A/V In jacks.
DVD/CD/VCR Receiver Audio/Video Out is not selected for viewing at the TV.
DVD/CD/VCR Receiver BROADCAST TYPE mode is set to SAP or MONO.
No action is possible.
No action is possible.
Make A/V connections. Stereo is available only via A/V output from DVD/CD/VCR Receiver.
Select AUX or A/V source as TV input.
Set BROADCAST TYPE mode to STEREO. See Using the VCR Setup Menu on page 18. 41 Troubleshooting (Continued) Symptom Severe hum or noise is heard. Cause Correction
The plugs and jacks are dirty.
The disc is dirty.
The speakers and components are connected poorly.
Wipe them with a cloth slightly mois-
tened with alcohol.
Clean the disc.
Connect the speakers and components securely.
The DVD/CD/VCR Receiver is located too close to the TV.
Move your TV away from the audio components. Radio stations cannot be tuned in.
The antenna is positioned or connected poorly.
Connect the antenna securely. No sound from DIGITAL AUDIO IN (OPTICAL). The remote control does not work properly.
The signal strength of the stations is too weak (when tuning in with automatic tuning).
No stations have been preset or preset stations have been cleared (when tuning by scanning preset stations).
DVD/CD/VCR Receiver source is not set to DIGITAL AUDIO IN (OPTICAL).
The remote control is not pointed at the remote sensor of the DVD/CD/VCR Receiver.
The remote control is too far from the DVD/CD/VCR Receiver.
There is an obstacle in the path of the remote control and the DVD/CD/VCR Receiver.
The batteries in the remote control are exhausted.
This remote control uses same buttons for VCR and DVD (ex. PLAY).
Adjust the antennas and connect an external antenna if necessary.
Tune in the station manually.
Preset the stations (page 37).
Select OPTICAL by pressing AUX.
Point the remote control at the remote sensor of the DVD/CD/VCR Receiver.
Operate the remote control within 23 ft
(7 m).
Remove the obstacle.
Replace the batteries with new ones.
When using a VCR, first press the VCR button. When using a DVD, first press the DVD button. Moisture Condensation Moisture condensation can occur:
When the DVD/CD/VCR Receiver is moved from a cold place to a warm place. Under extremely humid conditions. In locations where moisture condensation may occur:
Keep the DVD/CD/VCR Receiver plugged into an AC power outlet with POWER On. This will help prevent condensation. When condensation has occurred, wait a few hours for the DVD/CD/VCR Receiver to dry before using it. 42 Language Code List Enter the appropriate code number for the initial settings Disc Audio, Disc Subtitle and/or Disc Menu
(See page 21). Code Language Code Language Code Language Code Language 6566 6565 6570 8381 6577 6582 7289 6583 6588 6590 6665 6985 6678 6890 6672 6682 6671 7789 6669 7577 6765 9072 6779 7282 6783 6865 7876 6978 6979 6984 7079 Abkhazian Afar Afrikaans Albanian Amharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali; Bangla Bhutani Bihari Breton Bulgarian Burmese Byelorussian Cambodian Catalan Chinese Corsican Croatian Czech Danish Dutch English Esperanto Estonian Faeroese 7074 7073 7082 7089 7176 7565 6869 6976 7576 7178 7185 7265 7387 7273 7285 7383 7378 7365 7165 7384 7465 7487 7578 7583 7575 7589 7579 7585 7679 7665 7686 Fiji Finnish French Frisian Galician Georgian German Greek Greenlandic Guarani Gujarati Hausa Hebrew Hindi Hungarian Icelandic Indonesian Interlingua Irish Italian Japanese Javanese Kannada Kashmiri Kazakh Kirghiz Korean Kurdish Laothian Latin Latvian, Lettish 7678 7684 7775 7771 7783 7776 7784 7773 7782 7779 7778 7865 7869 7879 7982 8065 8083 7065 8076 8084 8185 8277 8279 8285 8377 8365 7168 8382 8372 8378 8368 Lingala Lithuanian Macedonian Malagasy Malay Malayalam Maltese Maori Marathi Moldavian Mongolian Nauru Nepali Norwegian Oriya Panjabi Pashto, Pushto Persian Polish Portuguese Quechua Rhaeto-Romance Romanian Russian Samoan Sanskrit Scots Gaelic Serbian Serbo-Croatian Shona Sindhi 8373 8375 8376 8379 6983 8385 8387 8386 8476 8471 8465 8484 8469 8472 6679 8473 8479 8482 8475 8487 8575 8582 8590 8673 8679 Singhalese Slovak Slovenian Somali Spanish Sudanese Swahili Swedish Tagalog Tajik Tamil Tatar Telugu Thai Tibetan Tigrinya Tonga Turkish Turkmen Twi Ukrainian Urdu Uzbek Vietnamese Volapk 6789 Welsh 8779 Wolof 8872 7473 8979 9085 Xhosa Yiddish Yoruba Zulu E C N E R E F E R 43 Country Code List Enter the appropriate code number for the initial setting Country Code (See page 23). Azerbaidjan Bosnia-Herzegovina Barbados Bangladesh Belgium Burkina Faso Bulgaria Bahrain Burundi Benin Bermuda Brunei Darussalam Bolivia Brazil Bahamas Bhutan Bouvet Island Code Country Andorra AD United Arab Emirates AE Afghanistan AF Antigua and Barbuda AG AI Anguilla Albania AL Armenia AM Netherlands Antilles AN Angola AO AQ Antarctica Argentina AR American Samoa AS Austria AT AU Australia AW Aruba AZ BA BB BD BE BF BG BH BI BJ BM BN BO BR BS BT BV BW Botswana BY BZ CA CC CF CG CH CI CK CL CM CN CO CR CS CU CV CX CY CZ DE DJ DK DM DO DZ EC EE EG EH Western Sahara Belarus Belize Canada Cocos (Keeling) Islands Central African Republic Congo Switzerland Ivory Coast Cook Islands Chile Cameroon China Colombia Costa Rica Former Czechoslovakia Cuba Cape Verde Christmas Island Cyprus Czech Republic Germany Djibouti Denmark Dominica Dominican Republic Algeria Ecuador Estonia Egypt 44 Code Country ER ES ET FI FJ FK FM FO FR FX Eritrea Spain Ethiopia Finland Fiji Falkland Islands Micronesia Faroe Islands France France (European Territory) Gabon Great Britain Grenada Georgia French Guyana Ghana Gibraltar Greenland GA GB GD GE GF GH GI GL GM Gambia Guinea GN Guadeloupe (French) GP Equatorial Guinea GQ Greece GR S. Georgia & S. Sandwich GS Isls. Guatemala Guam (USA) GT GU GW Guinea Bissau GY HK HM Guyana Hong Kong Heard and McDonald Islands Honduras Croatia Haiti Hungary Indonesia Ireland Israel India British Indian Ocean Territory Iraq Iran Iceland Italy Jamaica Jordan Japan Kenya Kyrgyzstan Cambodia6 Kiribati Comoros Saint Kitts & Nevis Anguilla North Korea South Korea Cayman Islands Kazakhstan Laos Lebanon IQ IR IS IT JM JO JP KE KG KH KI KM KN KP KR KW Kuwait KY KZ LA LB HN HR HT HU ID IE IL IN IO Northern Mariana Islands Marshall Islands Macedonia Mali Mauritania Montserrat Malta Mauritius Maldives Saint Lucia Liechtenstein Sri Lanka Liberia Lesotho Lithuania Luxembourg Latvia Libya Morocco Monaco Moldavia Code Country LC LI LK LR LS LT LU LV LY MA MC MD MG Madagascar MH MK ML MM Myanmar MN Mongolia MO Macau MP MQ Martinique (French) MR MS MT MU MV MW Malawi Mexico MX Malaysia MY Mozambique MZ NA Namibia New Caledonia (French) NC Niger NE Norfolk Island NF Nigeria NG NI Nicaragua Netherlands NL Norway NO Nepal NP Nauru NR NU Niue NZ New Zealand OM Oman PA PE PF PG PH PK PL PM PN PR PT PW Palau PY QA RE RO RU RW Rwanda SA SB Panama Peru Polynesia (French) Papua New Guinea Philippines Pakistan Poland Saint Pierre and Miquelon Pitcairn Island Puerto Rico Portugal Paraguay Qatar Reunion (French) Romania Russian Federation Saudi Arabia Solomon Islands SK SL SM SN SO SR ST SU SV SY SZ TC TD TF Code Country SC SD SE SG SH SI SJ Seychelles Sudan Sweden Singapore Saint Helena Slovenia Svalbard and Jan Mayen Islands Slovak Republic Sierra Leone San Marino Senegal Somalia Suriname Saint Tome and Principe Former USSR El Salvador Syria Swaziland Turks and Caicos Islands Chad French Southern Territories Togo TG Thailand TH Tadjikistan TJ Tokelau TK Turkmenistan TM Tunisia TN Tonga TO East Timor TP Turkey TR Trinidad and Tobago TT TV Tuvalu TW Taiwan TZ UA UG UK UM Tanzania Ukraine Uganda United Kingdom USA Minor Outlying Islands United States Uruguay Uzbekistan Vatican City State Saint Vincent &
Grenadines Venezuela Virgin Islands (British) Virgin Islands (USA) Vietnam Vanuatu VE VG VI VN VU WF Wallis and Futuna Islands WS YE YT YU ZA ZM ZR ZW Zimbabwe Samoa Yemen Mayotte Yugoslavia South Africa Zambia Zaire US UY UZ VA VC Specifications General Power requirements Power consumption Dimensions (approx.) Mass (approx.) Operating temperature Operating humidity Signal system AC 120V, 60 Hz 80W 430 X 97.5 X 360 mm (16.9 x 3.9 x 14.2 inches) (w x h x d) 7 kg (15.4 lbs) 5C to 35C (41F to 95F) 5 % to 90 %
NTSC Inputs Outputs ANTENNA IN VCR VIDEO IN VCR AUDIO IN FM ANTENNA IN AM ANTENNA IN DIGITAL AUDIO IN Antenna or CATV input, 75 ohms 1 Vp-p 75 ohms, sync negative, RCA jack x 1
-6.0 dBm more than 47 kohms, RCA jack (L, R) x 1 FM antenna input, 300 ohms AM antenna input, 300 ohms 5 V (p-p), 75 , Optical connector x 1 VIDEO OUT S-VIDEO OUT COMPONENT VIDEO OUT
(PROGRESSIVE SCAN) Audio output (analog audio) RF OUT 1 Vp-p 75 ohms, sync negative
(Y) 1.0 V (p-p), 75 ohms, negative sync, Mini DIN 4-pin x 1
(C) 0.286 V (p-p) 75 ohms
(Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 ohms, RCA jack x 2 2.0 Vrms (1 KHz, 0 dB), 330 ohms, RCA jack (L, R) x 1 Channel 3 or 4 (Switchable) VCR Specifications Head system Timer Tape speed Tape width Maximum recording time Rewind time Antenna Channel coverage Frequency range Signal-to-noise ratio Dynamic range Channel separation Four head helical scan azimuth system 12-hour display type with AM, PM SP: 33.35 mm/sec, LP: 16.67 mm/sec, SLP: 11.12 mm/sec 12.7 mm SP: 2 HOURS (T-120), SLP: 6 HOURS (T-120)/8 HOURS (T-160) About 150 seconds (T-120) 75 ohms (VHF/UHF) VHF: 2-13, UHF: 14-69, CATV: 1-125 (4A, A-W, W+1 - W+84, A-5 - A-1) 20Hz to 20kHz More than 43dB More than 85 dB (AUDIO OUT jacks) More than 55 dB (AUDIO OUT jacks) DVD Specifications Laser system Frequency response Signal-to-noise ratio Harmonic distortion Dynamic range Semiconductor laser, wavelength 650 nm DVD (PCM 48 kHz): 8 Hz to 22 kHz, CD: 8 Hz to 20 kHz More than 75 dB (AUDIO OUT jacks) Less than 0.4%
More than 85 dB (AUDIO OUT jacks) E C N E R E F E R 45 Specifications (Continued) FM Tuner Tuning Range Intermediate Frequency Signal-to-Noise Ratio Frequency Response 87.5 - 108.0 MHz 10.7 MHz 60 dB 150 - 10,000 Hz AM Tuner Tuning Range Intermediate Frequency 530 - 1,720 kHz 450 kHz Amplifier Stereo mode Surround mode Inputs Speakers Type Impedance Frequency Response Sound Pressure Level Rated Input Power Max. Input Power Net Dimensions (W x H x D) Net Weight 35W + 35W (4 at 1 kHz, THD 10 %) Front: 35W + 35W (THD 10 %) Center*: 35W Surround*: 35W + 35W (4 at 1 kHz, THD 10 %) Subwoofer*: 50W (4 at 30 Hz, THD 10 %)
*Depending on the sound mode settings and the source, there may be no sound output. LINE 1, LINE 2, OPTICAL IN Satellite Speaker 2 Way 2 Speaker 8 110 - 40,000 Hz 83 dB/W (1m) 50W 100 W 100 x 147 x 127.5 mm
(3.9 x 5.8 x 5.0 inches) 0.92 kg (2.0 lbs) Passive Subwoofer 1 Way 1 Speaker 4 40 - 1,500 Hz 82 dB/W (1m) 100 W 200 W 200 x 425 x 381 mm
(7.9 x 16.7 x 15 inches) 7.06kg (15.6 lbs) Accessory:
Video cable . 1 Audio cable . 1 RF 75-ohm Coaxial Cable . 1 Speakers . 6 Speaker cables . 5 AM loop antenna . 1 FM antenna . 1 Remote control . 1 Batteries . 2
Design and specifications are subject to change without notice. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved. DTS and DTS Digital Surround are registered trademarks of Digital Theater Systems, Inc. 46 Notes E C N E R E F E R 47 ZENITH ELECTRONICS CORPORATION DVD/CD/VCR Receiver XBV344 LIMITED WARRANTY-USA Zenith will repair or replace your product, at Zeniths option, if it proves to be defective in material or workmanship under nor-
mal use, during the warranty period (Warranty Period) listed below, effective from the date (Date of Purchase) of original consumer purchase of the product. This warranty is good only to the original purchaser of the product and effective only when used in the United States, excluding U.S. Territories. WARRANTY PERIOD:
LABOR: 90 DAYS from the Date of Purchase. PARTS: ONE YEAR from the Date of Purchase. Repaired or Replacement Units are warranted for the remaining period of the original warranty. HOW SERVICE IS HANDLED:
Call 1-800-984-9349 for instructions on getting the defec-
tive unit repaired or replaced. Please retain dated sales receipt and your box to return the unit to Zenith for repair or replacement. Both ways shipping charges will be borne by Zenith during the Warranty Period. After the Warranty Period, you pay in-
bound shipping charges and Zenith pays return shipping charges. THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. ZENITH WILL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INDI-
RECT, OR INCIDENTAL DAMAGES OF ANY KIND, INCLUDING LOST REVENUES OR PROFITS, IN CONNEC-
TION WITH THE PRODUCT. SOME STATES DO NOT ALLOW LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS LIMITED WARRANTY DOES NOT APPLY TO:
1. Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration, maintenance or failure to maintain, or separate system components; and 2. Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside environmental specifications or contrary to the requirements or precautions in the Operating Guide, accident, lightning strikes or other nat-
ural causes, unauthorized modification or alteration, incorrect electrical current or voltage, software errors that do not dis-
able functionality, operating software protocols adopted after the date of manufacture or for outside the U.S., institutional or commercial use, or other causes not arising out of defect in material or workmanship. 3. Therefore, the cost of repair or replacement of such a defective product shall be borne by the consumer. CUSTOMER INTER-ACTIVE CENTER NUMBERS:
For Warranty Service Call 1-800-984-9349 (Monday ~ Friday, 7 AM ~ 7 PM CT) Retain your dated sales receipt to prove the Date of Purchase as well as your box for shipping the unit to Zenith, for warranty service. Legible copy of your sales receipt must be submitted with the unit at the time the unit is returned for warranty service. For Post Warranty Repair For repair or replacement after the Warranty Period has expired, Call 1-800-984-9349 (Monday ~ Friday, 7 AM ~ 7 PM CT) For Where-to buy, Product Assistance, or Customer Assistance Call 1-877-9 Zenith (1-877-993-6484) (Monday ~ Friday, 7 AM ~ 8 PM CT and Saturday, 8 AM ~ 5 PM CT) and select an appropriate option from the menu. Or visit our website at http://www.zenithservice.com FOR WARRANTY SERVICE:
You must call 1-800-984-9349 (Monday ~ Friday, 7 AM to 8 PM CT) and select appropriate option from the menu to confirm the product is defective and to obtain Return Authorization (RA). During the Warranty Period, Zenith will send you a return-
shipping label. After you obtain RA for return, please box your unit with a copy of the sales receipt and enough packing materi-
al to ensure undamaged delivery of your product. When you receive the label, place it on the box and call the 800 # in the instruction for pick-up. When your unit is received, Zenith will repair or replace your unit in accordance with this Limited Warranty. ADVANCE SHIPMENT. If replacement unit is available and you want second day delivery, our service representative will ask for your credit card number. Zenith requires a reserved deposit by credit card as surety for such advance shipment. Your credit card will not be charged if you return the defective unit in 10 business days. For advance shipment, the return label will come with the replacement unit sent to you. Please follow boxing and shipping instructions above. ZENITH ELECTRONICS CORPORATION 2000 MILLBROOK DRIVE LINCOLNSHIRE, IL 60069 Zenith Part No. 206-3870 GS# 3834RM0058K Printed in China Issue O
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2003-07-03 | 67.25 ~ 71.75 | HID - Part 15 TV Interface Device | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2003-07-03
|
||||
1 | Applicant's complete, legal business name |
LG Electronics USA
|
||||
1 | FCC Registration Number (FRN) |
0020917688
|
||||
1 | Physical Address |
1000 Sylvan Avenue
|
||||
1 |
Englewood Cliffs, New Jersey 07632
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
t******@metlabs.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
BEJ
|
||||
1 | Equipment Product Code |
9QKE40340
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
K****** H****
|
||||
1 | Title |
Director, Standards & Compliance
|
||||
1 | Telephone Number |
201-4********
|
||||
1 | Fax Number |
201-8********
|
||||
1 |
k******@lge.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | HID - Part 15 TV Interface Device | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | VCR/DVD Receiver/AmplifierCombination | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | This device is authorized with the RF Modulator from LG Innotek Co., Ltd. Model TADM-H102F. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
LG Electronics Inc. Digital Media Standards Lab
|
||||
1 | Name |
M**** L******
|
||||
1 | Telephone Number |
82-31********
|
||||
1 | Fax Number |
82-31********
|
||||
1 |
e******@lge.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B | 05 | 61.25 | 65.75 | ||||||||||||||||||||||||||||||||||||
1 | 2 | 15B | 05 | 67.25 | 71.75 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC