|
app
s
|
Applicant Information
|
|
|
various
|
Effective |
2012-08-02
|
|
various
|
2012-07-24
|
|
various
|
2012-06-19
|
|
various
|
Applicant's complete, legal business name |
LG Electronics USA, Inc.
|
|
various
|
FCC Registration Number (FRN) |
0020917688
|
|
various
|
Physical Address |
1000 Sylvan Ave.
|
|
various
|
Englewood Cliffs, New Jersey 07632
|
|
various
|
United States
|
|
|
app
s
|
TCB Information
|
|
various
|
TCB Application Email Address |
c******@ccsemc.com
|
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
various
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
various
|
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
|
app
s
|
FCC ID
|
|
various
|
Grantee Code |
ZNF
|
|
various
|
Equipment Product Code |
VS930
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
various
|
Name |
K******** H******
|
|
various
|
Title |
Director, Standards & Compliance
|
|
various
|
Telephone Number |
201-2********
|
|
various
|
Fax Number |
201-8********
|
|
various
|
E-mail |
k******@lge.com
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 11/14/2012 |
| various | 11/18/2012 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| various |
Is this application for software defined/cognitive radio authorization? | No |
| various | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| various | JBP - Part 15 Class B Computing Device Peripheral |
| various | PCE - PCS Licensed Transmitter held to ear |
| various | DTS - Digital Transmission System |
| various | DXX - Part 15 Low Power Communication Device Transmitter |
| various | NII - Unlicensed National Information Infrastructure TX |
| various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Cell Phone GSM/CDMA/WCDMA/LTE+BT+WLAN+NFC |
| various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| various | Yes |
| various | Modular Equipment Type | Does not apply |
| various | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
| various | Original Equipment |
| various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| various | Grant Comments | Class II Permissive Change. Output power is peak conducted. This device is approved for use in the handset described in the filing. |
| various | Class II Permissive Change. |
| various | Class II Permissive Change. Power output listed is ERP for Parts 22 and 27 and EIRP for Part 24. This device has SVDO and SVLTE capabilities. SAR compliance for body-worn operation is based on a separation distance of 1.0 cm between the unit and the body of the user. End-users must be provided with body-worn operating conditions for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR values for this FCC ID for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions are 0.81 W/kg, 1.04 W/kg, 1.04 W/kg, and 1.41 W/kg, respectively. HAC Rating: M3/T3-2007 |
| various | Class II Permissive Change. Power output is conducted. This device is authorized to operate with the specific handset described in this filing. SAR compliance for body-worn operation is based on a separation distance of 1.0 cm between the unit and the body of the user. End-users must be provided with body-worn operating conditions for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR values for this FCC ID for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions are 0.31 W/kg, 0.18 W/kg, 0.18 W/kg, and 1.41 W/kg, respectively. |
| various | Class II Permissive Change. Power output is conducted. This device is authorized to operate with the specific handset described in this filing and must not operate in conjunction with any other antenna or transmitter except as documented in filings under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. The 5GHz bands are not capable of simultaneous transmission hot-spot operation. SAR compliance for body-worn accessory operation is based on a separation distance of 1.0 cm between the unit and the body of the user. End-users must be provided with operating conditions for satisfying RF exposure compliance. The highest reported SAR values for this FCC ID for head, body-worn accessory and simultaneous transmission use conditions are 0.85 W/kg, 0.17 W/kg and 1.26 W/kg, respectively.
This device is restricted to indoor-only use for the 5150.0 - 5250.0 MHz band. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 06-96 as a Client only without Radar Detection. |
| various | Class II Permissive Change to allow simultaneous transmission with WWAN & 5GHz. Power output is conducted. This device is authorized to operate with the specific handset described in this filing and must not operate in conjunction with any other antenna or transmitter except as documented in filings under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. The 5GHz bands are not capable of simultaneous transmission hot-spot operation. SAR compliance for body-worn accessory operation is based on a separation distance of 1.0 cm between the unit and the body of the user. End-users must be provided with operating conditions for satisfying RF exposure compliance. The highest reported SAR values under this FCC ID for head, body-worn accessory and simultaneous transmission use conditions are 0.85 W/kg, 0.16 W/kg and 1.33 W/kg, respectively.
This device is restricted to indoor-only use for the 5150.0 - 5250.0 MHz band. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 06-96 as a Client only without Radar Detection. |
| various | Class II Permissive Change to allow simultaneous transmission with WWAN & 5GHz. Power output is conducted. This device is authorized to operate with the specific handset described in this filing. SAR compliance for body-worn operation is based on a separation distance of 1.0 cm between the unit and the body of the user. End-users must be provided with body-worn operating conditions for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR values under this FCC ID for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions are 0.31 W/kg, 0.18 W/kg, 0.18 W/kg, and 1.41 W/kg, respectively. |
| various | Class II Permissive Change to allow simultaneous transmission with WWAN & 5GHz. Power output listed is ERP for Parts 22 and 27 and EIRP for Part 24. This device has SVDO and SVLTE capabilities. SAR compliance for body-worn operation is based on a separation distance of 1.0 cm between the unit and the body of the user. End-users must be provided with body-worn operating conditions for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR values under this FCC ID for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions are 0.81 W/kg, 1.04 W/kg, 1.04 W/kg, and 1.41 W/kg, respectively. HAC Rating: M3/T3-2007 |
| various | Power output listed is ERP for Parts 22 and 27 and EIRP for Part 24. This device has SVDO and SVLTE capabilities. SAR compliance for body-worn operation is based on a separation distance of 1.0 cm between the unit and the body of the user. End-users must be provided with body-worn operating conditions for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR values for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions are 0.81 W/kg, 1.04 W/kg, 1.04 W/kg, and 1.41 W/kg, respectively. HAC Rating: M3/T3-2007 |
| various | Output power is peak conducted. This device is approved for use in the handset described in the filing. |
| various | Power output is conducted. This device is authorized to operate with the specific handset described in this filing. SAR compliance for body-worn operation is based on a separation distance of 1.0 cm between the unit and the body of the user. End-users must be provided with body-worn operating conditions for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR values for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions are 0.31 W/kg, 0.18 W/kg, 0.18 W/kg, and 1.41 W/kg, respectively. |
| various | Power output is conducted. This device is authorized to operate with the specific handset described in this filing and must not operate in conjunction with any other antenna or transmitter except as documented in filings under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. The 5GHz bands are not capable of simultaneous transmission hot-spot operation. SAR compliance for body-worn accessory operation is based on a separation distance of 1.0 cm between the unit and the body of the user. End-users must be provided with operating conditions for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory are 0.85 W/kg, 0.16 W/kg, respectively.
This device is restricted to indoor-only use for the 5150.0 - 5250.0 MHz band. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 06-96 as a Client only without Radar Detection. |
| various | This device is approved for use in the handset described in the filing. |
| various | Is there an equipment authorization waiver associated with this application? | No |
| various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
various
|
Firm Name |
Compliance Certification Services
|
|
various
|
HCT Co., LTD
|
|
various
|
Name |
T**** C****
|
|
various
|
S****** L****
|
|
various
|
Telephone Number |
510-7********
|
|
various
|
82-31********
|
|
various
|
Fax Number |
510-6********
|
|
various
|
82-31********
|
|
various
|
E-mail |
t******@ccsemc.com
|
|
various
|
s******@HCT.co.kr
|
|