all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 4 5 6 |
|
Users Manual | Users Manual | 429.63 KiB | April 12 2014 | |||
1 2 3 4 5 6 | Attestation Statements | |||||||
1 2 3 4 5 6 | Cover Letter(s) | |||||||
1 2 3 4 5 6 | External Photos | |||||||
1 2 3 4 5 6 | ID Label/Location Info | |||||||
1 2 3 4 5 6 | Internal Photos | March 12 2014 | ||||||
1 2 3 4 5 6 | Test Report | |||||||
1 2 3 4 5 6 | RF Exposure Info | |||||||
1 2 3 4 5 6 | RF Exposure Info | |||||||
1 2 3 4 5 6 | Test Setup Photos | |||||||
1 2 3 4 5 6 | Test Setup Photos | |||||||
1 2 3 4 5 6 | Test Report | |||||||
1 2 3 4 5 6 | Test Report | |||||||
1 2 3 4 5 6 | Test Report | |||||||
1 2 3 4 5 6 | Test Report |
1 2 3 4 5 6 | Users Manual | Users Manual | 429.63 KiB | April 12 2014 |
Explanationofinstructions This symbol indicates "the potential and imminent danger of death or serious injury*1 to a person". This symbol indicates "the possibility of death or serious injury to a person". This symbol indicates "the possibility of personal minor injury*2 to a person or physical damage*3". Not liquids No wet hands Do not splash with water or other liquids. Also, never use in places subject to direct splashing with water or pet urine, etc. or in humid places such as bath areas, or use with wet hands. Doing so might cause electric shock, malfunction from short-circuiting, or corrosion of electronic circuits. In the event that the product is splashed with liquid, immediately disconnect the power plug of the charging equipment (sold separately). Malfunctions caused by wetting with water or humidity are not covered by the warranty and charges will be incurred for repair. When removing the back cover, do not exert extra force. The battery pack might jump out and cause injury or malfunction. Do Do
*1 Serious injury : This refers to loss of sight, injury, burns (high- and low-temperature), electric shock, broken bones, injuries with residual aftereffects from poisoning, etc., and injuries requiring hospital admission for treatment or long term hospital attendance as an outpatient.
*2 Minor injury: This refers to injuries, burns (high- and low-temperature), electric shock, etc. that do not require hospital admission for treatment or long-term hospital attendance as an outpatient.
*3 Physical damage: This refers to extended damage to buildings, furniture, livestock, or pets. Explanationofgraphicsymbols Indicatesanactionthatis notallowed. Indicatesthathandlingwith wethandsisnotallowed. Indicatesthatdisassembly isnotallowed. Dont No wet hands Not disassembly Indicatesthatuseinaplace wheretheproductislikelyto getwetorallowingtheproduct togetwetisnotallowed. Indicatesanactionthatmust bedone. Indicatesthatthepowerplug mustbedisconnectedfromthe poweroutlet. Not liquids Do Unplug Precautionscommontothemainunit,batterypack,chargingequipment,au MicroICCard(LTE),peripheraldevices Besuretoreadthefollowinghazardsbeforeuse. Be sure to use only the specified peripheral devices. Use of other devices might cause overheating, ignition, rupture, malfunction, or leakage of liquid. Do not use, store or leave the product in hot places (e.g. by the fire, near a heater, under a kotatsu, in direct sunlight, in a car in the hot sun). Doing so might cause ignition, rupture, malfunction, fire or injury. Before entering an area where flammable gas is generated such as a gas station, be sure to turn off this product. Do not charge the battery. Failure to do so might cause the gas to catch fire. Do not put the product in a cooking apparatus such as a microwave oven or a pressure vessel. Doing so might cause ignition, rupture, malfunction, fire or injury. Do not throw the product into a fire or heat it. Doing so might cause ignition, rupture or fire. Do not short-circuit the external connection terminal, earphone jack, etc. Do not allow conductive foreign objects (metal fragments, pencil leads, etc.) to come into contact with or get inside the connection terminal, earphone jack, etc. Doing so might cause fire, malfunction or burns due to overheating. When using metal accessories, etc., do not let the metal part come in contact with the connection terminal or power outlet while charging. Doing so might cause electric shock, ignition, injury or malfunction. Do not expose the camera lens directly to sunlight for an extended period. Doing so might cause ignition, rupture or fire by the light-collecting mechanism of the lens. The customer is not allowed to disassemble, modify or repair the product. Doing so might cause malfunction, ignition, electric shock, or injury. The Company is not liable even in the event of any non-conformities arising on the product or peripheral devices as a result of modification, etc. Modification of cell phones is in violation of the Wireless Telegraphy Act. Besuretoreadthefollowingwarningsbeforeuse. Do not drop or subject to strong impact, such as throwing. Doing so might cause rupture, overheating, ignition, leakage of liquid or malfunction. Do not use outside when you hear thunder. Doing so might cause lightning strikes or electric shock. Do not let your hands, fingers and other parts of the body touch the external connection terminal or earphone jack. Doing so might cause electric shock, injury or malfunction. If the product is damaged because it is dropped, and its display is cracked or internal parts are exposed, do not touch the cracked display or exposed parts with your hands. Doing so might cause electric shock or injury from damaged parts. Contact au shop or Keitai Guarantee Service Center. If this product or charging equipment (sold separately) are wet, charging may cause electric shock, short-circuiting or corrosion of electronic circuits, resulting in fire from overheating, malfunction or burns. Do Dont Do Dont Dont Dont Dont Dont Not disassembly Dont Dont Dont Dont Not liquids No wet hands Exemptions The Company is not liable for any damages arising from earthquakes, lightning, storms, floods or other natural disasters, as well as fires, actions by third parties, other accidents, intentional or mistaken misoperation by the customer, or use under other unusual conditions outside the responsibility of the Company. The Company is not liable for any incidental damages (change/disappearance of described content, loss of business income, disruption of business, etc.) arising from use or inability to use the product. The Company is not liable for any damages arising from failure to observe the described content of the "Instruction Manual". The Company is not liable for any damages arising, for example, from malfunction caused by combination with connected devices or software not related to the Company. Captured image data or downloaded data may sometimes be altered or lost due to malfunctions, repair or other handling of the product. The Company is not liable for any damage or lost income resulting from recovery of these data. It is recommended you keep a copy of important data on your PC's hard disk, etc. Whatever the cause of the defect or malfunction may be, the Company assumes no responsibility for alteration or loss of saved data.
* "The Company" as appears in this manual refers to the following companies:
Sold by: KDDI CORPORATION, OKINAWA CELLULAR TELEPHONE COMPANY Imported by: LG Electronics Japan, Inc. Manufactured by: LG Electronics Inc. memo Reproduction of the content of this manual in part or in whole is prohibited. The content of this manual is subject to change without notice. Every effort has been made in the preparation of this manual. Should you notice any unclear points, omissions, etc., feel free to contact us. Safety Precautions (Observe Strictly) Beforeusingtheproduct,thoroughlyreadthesesafetyprecautionsforproper use.Afterreading,storetheprecautionsinasafeplace. These "Safety Precautions" describe instructions that should be observed to prevent damage to property or injury to the customer or others using the product. These instructions are divided into the following categories. Dont Dont Dont Dont Dont Dont Dont Dont Dont Dont Dont Dont Dont Do Do Do Do Do Do not operate the product while driving a car or motorbike, riding a bicycle, or walking. Doing so might compromise traffic safety and cause an accident. If charging is not completed after the specified charging time, stop charging. Failure to do so might cause leakage of liquid, overheating, rupture or ignition. Do not leave the product in places where small children can reach. Small children might swallow small parts, etc. by mistake and choke on them, or might drop them by mistake and cause accidents or injury. Besuretoreadthefollowingcautionsbeforeuse. Do not store the product in places subject to direct sunlight (e.g. in cars), places that get hot or get extremely cold, or in humid or dusty places. Doing so might cause overheating, ignition, deformation or malfunction. Do not place the product on unstable places such as rocky stands or tilting surfaces. Dropping the product might cause injury or damage. Pay sufficient attention while vibrator is on. Also, pay sufficient attention to impact, etc. Do not cover or wrap this product with bedding, etc. while using or charging the product. Doing so might cause fire, malfunction or injury. Do not touch the main unit or the specified charging equipment (sold separately) for a long time while power is being supplied from an external source. Doing so might cause low-temperature burns. Be careful when using this product in a high temperature place for a long time. It might become hot. Using it with your skin touching the product for a long time might cause low-temperature burns. Do not use power outlets or wiring apparatus beyond its rating. Also, exceeding rating, for example, by connecting multiple devices to a single power strip might cause fire due to overheating. Do not use the product with the back cover removed. Do not place the product near corrosive chemicals or in places where corrosive gas is generated. Doing so might cause malfunction or loss of internal data. Do not place or store the product with the back cover removed from the main unit. Doing so might allow dust or other foreign objects to get inside and cause malfunction. Stop using the product if there is smoke, abnormal odor or noise, excessive overheating, or other abnormalities. If an abnormality occurs, disconnect the specified charging equipment (sold separately) from the power outlet or cigarette lighter socket, make sure that the product is not overheating before turning the power off, and remove the battery and contact an au shop or Keitai Guarantee Service Center. Also, if you have dropped or damaged the product, do not continue to use it in that state, and contact an au shop or Keitai Guarantee Service Center. When inserting an earphone, etc. into the product, adjust the volume to the proper level. Setting too loud a volume or using the earphone continuously for a long period of time might adversely affect your ears. Also, raising the volume too high might prevent you from hearing sounds around you, which might in turn lead to a traffic accident at a railroad crossing or pedestrian crossing. When adjusting the volume with an earphone, etc. inserted into the product, raise the volume a little at a time. If you raise the volume too much from the outset, sudden loud noise from the earphone, etc. might adversely affect your ears. When using a charging equipment or an external device, insert/remove the connector straight to/from the terminal. Failure to insert correctly might cause damage or malfunction. If a child uses this product, ensure that a guardian instructs the child on proper use of this equipment to prevent any danger. Also, ensure that the child is using the product as per instructions. Failure to do so might cause injury. Mainunit Besuretoreadthefollowingwarningsbeforeuse. Dont Do Do not use a cell phone while driving a car or riding a motorbike or bicycle. It might cause a traffic accident. Use of a cell phone while driving a car or motorbike is prohibited by law. Use of a cell phone while riding a bicycle may be punishable by some regulations. When using the terminal in a medical facility, follow the instructions of the facility. Turn the terminal off in areas where use is prohibited. Failure to do so might cause electronic equipment or electronic medical equipment a malfunction. When the product is set to power on automatically, disable the setting. When boarding an airplane, turn this product off or turn airplane mode on. As there are usage restrictions in an airplane, follow the instructions from the airline. When the product is set to power on automatically, disable the setting. Failure to do so might cause airplane electronic equipment a malfunction. If you commit any prohibited acts, such as using the phone in an airplane, you will be punished in accordance with the law. When using the product near an implanted pacemaker, implanted cardioverter-
defibrillator or other electronic medical device, radio waves might affect these units and devices. So, please observe the following. 1. Those with an implanted pacemaker or implanted cardioverter-defibrillator should carry or use the product at least 15 cm away from the pacemaker or cardioverter-defibrillator applied part. 2. Set the product to airplane mode or turn off the power in advance in places where you cannot move freely or where you cannot secure a distance of more than 15 cm with one another, since there may be people with a implanted cardiac pacemaker or implanted cardioverter-defibrillator nearby. 3. Pay attention to the following points when using the product inside medical institutions. Do not bring the product into operating theaters, intensive-care units (ICU) and coronary care units (CCU). Turn the product off in hospital wards. Even if you are in a lobby, etc., be sure to turn the product off when there are electronic medical devices nearby. When a medical institution has laid down designated areas where use of the product is prohibited or is not allowed to be brought in, abide by the instructions of that medical institution. 4. When using electronic medical devices other than an implanted pacemaker and implanted cardioverter-defibrillator outside a medical institution (e.g. home medical treatment), check individually with the manufacturer of the electronic medical device regarding the influence of radio waves. Stay alert to your surroundings when calling, messaging, browsing the Internet, taking photos, playing games or listening to music. Failure to do so might cause falling down or traffic accident. When using the product with the flash on, do not preform in front of a person's eyes. Do not gaze at the light emitting part during flash. Doing so might cause impairment of eyesight, etc. Be especially careful not to take pictures of small children from a very close distance. Do not lighten flash toward a person who drives an automobile, a motorbike or a bicycle. If dazzled by the light, the driver might become unable to drive and cause an accident. Sometimes, very rarely some people demonstrate symptoms such as temporary muscle spasms, loss of consciousness, etc. by watching repeatedly flickering screens. Those with a past history of this should consult with a physician beforehand. Do Dont Dont Do Besuretoreadthefollowingcautionsbeforeuse. Use of the product in an automobile sometimes affects on-vehicle electronic devices, though this rarely happens. If this happens, stop using since this might compromise safe travel. If you feel any abnormality with your skin, immediately consult a dermatologist. Itching, rashes, eczema, etc. sometimes occurs depending on your physical constitution and condition. The materials of parts used on the product are as follows. Dont Do Part Material Surfacetreatment Glass Display External case (Display side frame) PC Back cover PC PC Volume key PC Power key Acryl Home key Stainless steel Earpiece Glass Camera lens Camera lens decoration AL PC Flash External connection terminal Stainless steel Coating Coating Coating Coating Coating
-
Coating Coating Anodic oxide
-
NI Plating Do not bring the product close to magnetized objects such as cash cards, floppy disks, credit cards, and prepaid cards. Doing so might cause loss of recorded information. Do not let liquids, metal objects, burnable items, or other foreign matter to get inside of au Micro IC Card (LTE) slot or microSD memory card slot. Doing so might cause fire, electric shock, malfunction or injury. Do not swing the product around by holding earphones, etc. Doing so might cause an accident or damage. Be careful when setting vibrator (vibration) or ringtone volume if your heart is weak. Doing so might cause bad effect to heart. Pay attention to items stuck to the main unit. The speaker uses magnets, so thumbtacks and pins, craft knife blades, staples, and other metal objects sometimes become stuck to the main unit, and cause unexpected injury. Before using the product, be sure to check that there are no foreign objects on the speaker or other parts. Do not place the product directly on the sand beach, etc. Sand or other small particles might get inside the speaker, external connection terminal, or earphone jack and cause the volume to drop. If sand gets inside this product's main unit, it might cause overheating or malfunction. Dont Dont Dont Do Do Dont When using the product for calling or data communication, be careful not to keep the product in direct contact with your skin for a prolonged period, or not to cover the product with paper, cloth, bedding, etc. The main unit might get hot and cause fire, injure, burns or malfunction. Dont Batterypack
(The battery pack of the product is a lithium-ion battery.) When you purchase your cell phone, it is not fully charged. Charge the battery before using the product. Li-ion00 Besuretoreadthefollowinghazardsbeforeuse. Do not short-circuit the positive (+) and negative (-) terminals of the battery pack. Connect the battery pack to the product in the correct orientation. Connecting in an incorrect orientation might cause rupture, fire or overheating. Do not try to forcibly connect the battery pack, instead thoroughly check the connection terminals carefully before connection. Do not puncture the battery pack with a nail, hit it with a hammer or step on it. Doing so might cause ignition or damage. Do not let metal objects (such as necklaces and hairpins) to come in contact with the connection terminals when carrying or storing the battery pack. Doing so might cause overheating, ignition, fire, leakage of liquid, or malfunction due to a short circuit. Do not disassemble, modify or directly solder the battery pack. Doing so might cause spilling of the liquid inside the battery pack resulting in an accident such as loss of eyesight if it gets into the eyes, or cause overheating, ignition, rupture or injury. Do not use a battery pack that has been dropped, stepped on, damaged, or leaking battery liquid. Doing so might cause overheating, ignition, leakage of liquids, rupture, malfunction or injury. Immediately move the battery pack away from fire if you notice leakage of liquid or unusual odor. Failure to do so might cause the leaked liquid to catch fire resulting in ignition or rupture. Do not wet the battery pack with water, seawater, pet urine, etc. A wet battery pack might cause overheating, rupture, ignition, malfunction or injury. If you drop the product into the water by mistake, immediately turn off the power, remove the battery pack, and contact an au shop or Keitai Guarantee Service Center. Never charge the wet battery pack. If the leaked liquid gets on your skin or clothes, immediately rinse it off with water to avoid injury. If the liquid gets into your eyes, do not rub, but after wash your eyes with water, and immediately consult a doctor to avoid the risk of losing your eyesight. If the liquid gets on a device, wipe it off without touching the liquid. The battery pack is a consumable item. If the performance of a battery pack does not recover (e.g. the usable time after each charge has become extremely short), the battery pack is at the end of service life, so stop using and buy a new one of the specified type. Failure to do so might cause overheating, ignition, rupture or leakage of liquid. Note that the length of service life varies depending on the usage condition, etc. Be careful not to have the battery pack bitten by your pet. It might cause leakage of liquid, overheating, rupture, ignition, fire or injury. Dont Dont Dont Dont Not disassembly Dont Not liquids Do Do Do Chargingequipment Besuretoreadthefollowingwarningsbeforeuse. Dont Do not use at other voltages than the specified power supply voltage. Doing so might cause ignition, fire, overheating, electric shock or injury. AC adapter (sold separately): 100 VAC to 240 VAC DC adapter (sold separately): 12/24 VDC (for negative grounded vehicles only)
* Use the specified charging equipment (sold separately). Firmly insert the plug of the specified charging equipment (sold separately) into the power outlet or cigarette lighter socket down to the base of its pins. Incomplete insertion of the power plug might cause electric shock, overheating, ignition, fire or injury. Do not use the specified charging equipment when it is broken, or when the insertion connector of power outlet or cigarette lighter socket gets loose. If the fuse in the common DC adapter 03 (sold separately) blows, replace it with a fuse of the specified type (250 V, 1A). Replacing with a different type of fuse might cause overheating or ignition. (For information about fuse replacement, carefully read the manual for the common DC adapter 03 (sold separately).) Do not damage, modify, twist, pull, or place a heavy object on the power cord of the specified charging equipment (sold separately). Do not use a damaged cord. Doing so might cause electric shock, short circuit, fire or injury. Do Do Dont Dont Dont Do not let your hands, fingers or other parts of your body touch the connection terminals. Doing so might cause electric shock, injury or malfunction. Not liquids If you hear thunder, do not touch the specified charging equipment (sold separately). Doing so might cause electric shock as a result of a lightning strike. Before cleaning the specified charging equipment (sold separately), unplug its power plug from the outlet or cigarette lighter socket. If the plug remains plugged in when you clean the equipment, it might cause fire, malfunction, or injury from electric shock or short circuit. Unplug Wipe off the dust on the power plug. Failure to do so might cause fire, burns or electric shock. Do Install and position in-car devices where they do not hinder driving or safety equipment such as airbags. Failure to do so might cause a traffic accident. Follow the manuals for in-car devices to install them. Do When the specified charging equipment (sold separately) is not to be used for a long time, disconnect the power plug of the specified charging equipment (sold separately) from the power outlet or cigarette lighter socket. Failure to do so might cause a fire or malfunction. Unplug Not liquids Do not use in places subject to direct splashing with water or pet urine, etc. or in humid places such as bath areas. Doing so might cause malfunctions or injury resulting from overheating, fire, electric shock, or short-circuiting of electronic circuits. In the event that the product is splashed with liquid, immediately disconnect the power plug. Besuretoreadthefollowingwarningsbeforeuse. Do not use in humid places such as bath areas, or connect/disconnect the specified charging equipment (sold separately) with wet hands. Doing so might cause electric shock, malfunction or injury. Not liquids No wet hands Do Do Dont Do Charge the battery in a stable place. If placed on an inclined surface or wobbly stand, the product might fall and cause injury or damage. Pay careful attention while vibrator is set. In addition, do not cover or wrap the product with a cloth or bedding. Doing so might cause fire, malfunction or injury. When unplugging the plug of the specified charging equipment (sold separately) from the power outlet, hold and pull the power plug. Pulling on the cable might cause damage. Do not use the common DC adapter 03 (sold separately) with the car engine stopped. Doing so might cause draining of the car battery. Do not leave the specified charging equipment (sold separately) connected to the main unit with the battery pack removed. Doing so might cause ignition, electric shock or injury. auMicroICCard(LTE) Besuretoreadthefollowingwarningsbeforeuse. Do not put the au Micro IC Card (LTE) in a cooking apparatus such as a microwave oven or a pressure vessel. Doing so might cause melting, overheating, fuming, loss of data or malfunction. Dont Besuretoreadthefollowingcautionsbeforeuse. Be careful when attaching/removing the au Micro IC Card (LTE). Doing so might injure your hands or fingers. Use only the devices specified by the Company to insert the au Micro IC Card (LTE) in. Using a device not specified by the Company might cause loss of data or malfunction. For the specified devices, contact an au shop or Customer Service Center. Do not disassemble or modify the au Micro IC Card (LTE). Doing so might cause loss of data or malfunction. Do not use or leave the au Micro IC Card (LTE) in hot places such as by the fire or a heater. Doing so might cause melting, overheating, fuming, loss of data or malfunction. Do not throw the au Micro IC Card (LTE) into a fire or heat it. Doing so might cause melting, overheating, fuming, loss of data or malfunction. Do not touch the IC (metal) part of the au Micro IC Card (LTE) or short-circuit it. Doing so might cause loss of data or malfunction. Handling Precautions Theseprecautionsareprovidedtoensurethatperformancecanbefully demonstrated.Thoroughlyreadtheseprecautionstoensurecorrectuse. Precautionscommontothemainunit,batterypack,chargingequipment,au MicroICCard(LTE)andperipheraldevices Do not apply excessive force to the product during use. Be sure not to put the product into a tightly packed bag or place a heavy object on the product in a bag. Putting the product in your pocket and sitting on it might damage the display or internal circuit board resulting in a malfunction. It might cause connector damage or a malfunction when connecting an external device to the external connection terminal of the product or the earphone jack of the product. Such damage and malfunction are not covered by the warranty, even if there is no external damage. Do not use the product in extremely hot, cold or humid places. (Use within an ambient temperature range of 5 to 35 and humidity range of 35% to 85%.) Do not use in places subject to lots of dust or vibration. Clean the connection terminals and earphone jack with dry cotton swabs, etc. every now and then. Soiled terminals might cause poor connection. Do not exert a strong force which can result in deformation. Clean the product with a dry soft cloth (such as the type used for eyeglasses). Forceful rubbing with a dry cloth may scratch the display. The display may be stained if splash or smear is left attached to the surface. Wiping the product using alcohol, thinner, benzene, detergent, etc. might erase the printing on the outer casing or cause discoloration. Use as far away as possible from land-line phones, TVs, and radios. Use nearby might affect them. The product may become warm while charging etc., depending on the situations, but this is not abnormal. When the product is used by a child, parents or guardians should thoroughly read
"Instruction Manual" and teach the child how to use it. Turn off the power before removing the battery pack. If you remove the battery pack with the power on, saved data might be altered or lost. Mainunit Do not forcefully press, tap, or intentionally subject the display to strong impact. Doing so might cause scratching or damage. Do not forcefully press your fingernails, sharp objects, or hard objects against keys or display surface. Doing so might cause scratching or damage. The touch panel is designed to be lightly touched by fingers. Do not apply strong pressure with your fingers or sharp-pointed objects (such as fingernails, ballpoint pens, and pins) on the touch panel. In the following cases, the touch panel may not work even if you touch it. Note that it may cause false operations. Operation with fingernails Operation with a foreign object placed on the touch panel Operation with a protective sheet or sticker on the touch panel Operation with water drops left or frozen on the surface Operation with wet or sweaty fingers Do not remove the stickers that display the "Technical Conformity Mark
" printed with IMEI (International Mobile Equipment Identity) which can be seen when the battery pack is removed. These stickers prove that the product and the communication module you are using comply with the Wireless Telegraphy Act and Telecommunications Operations Act. Never use modified au cell phones. Use of a modified device violates the Radio Law. The product has acquired the certification of conformity with technical regulations for the specified radio station based on the Radio Law, and the "Technical Conformity Mark If the product's main unit is modified by removing the screw to disassemble, technical standard compliance becomes invalid. Never use the product without the valid certification. Doing so violates the Radio Law.
" is printed on the nameplate of the product's main unit as a certificate. To prevent unlawful modification, the product has been designed so that it cannot be easily disassembled. Modifying the product is prohibited by the Radio Law. Contents saved in the product, such as contacts, mails and bookmarks, might be altered or lost in an accident, malfunction, repair or mishandling. Be sure to keep a copy of important contents. Note that the Company assumes no responsibility for any damages or lost profits resulting from altered or lost contents. Do not drop the au Micro IC Card (LTE) or subject it to strong impact. Doing so may cause malfunction. Note that contents (both charged or free content) saved in the product cannot be returned to the customer when it is replaced for repair of malfunction, for example. Do not fold, bend or place a heavy object on the au Micro IC Card (LTE). Doing so may cause malfunction. Do not wet the au Micro IC Card (LTE). Doing so may cause malfunction. Do not scratch the IC (metal) part of the au Micro IC Card (LTE). Doing so may cause malfunction. Do not store the au Micro IC Card (LTE) in dusty places. Doing so may cause malfunction. Do not store the au Micro IC Card (LTE) in places exposed to direct sunlight or hot and humid places. Doing so may cause malfunction. Store the au Micro IC Card (LTE) out of reach of small children. Accidental swallow might cause suffocation, injury, etc. The product uses liquid crystal for its display. The display response speed may become slow when the ambient temperature is low, which is due to the property of liquid crystal and not a malfunction. The display response speed will return to normal at room temperature. Although the display used on the product is made using high-precision technology, some pixels (dots) might be lit or out at all times. Note that this is not a malfunction. Take care not to inconvenience people around you when you use the product in a public place. You are recommended to store copies of individual data such as photos you took, still images/videos and music on your PC by sending each file as mail attachment, etc. Note, however, that you may not be able to make copies of any copyrighted data even by the above mentioned means. Take care not to place magnetized items such as magnetic cards, speakers or TV sets near the product, as it might cause malfunction. Putting a strong magnetism close to the product might cause false operations. When you put the product in your pocket or bag, take care so that the display does not come in contact with metal objects or other hard objects. Doing so might cause scratching or damage. Do Do Not disassembly Dont Dont Dont Dont Dont Dont Dont Dont Do
"Messages (MMS/SMS) Setting Guide", "Basic Manual", "Notes on Usage", etc. are collectively referred to as "Instruction Manual". In this manual, LGL25 is usually referred to as the "product" or "main unit". In this manual, "microSD memory card", "microSDHC memory card" and "microSDXC memory card" are abbreviated as "microSD memory card" or "microSD".LGL25Notes on UsageMFL68687301December 2014, 1st EditionSold by:KDDI CORPORATION,OKINAWA CELLULAR TELEPHONE COMPANYImported by: LG Electronics Japan Inc.Manufactured by: LG Electronics Inc.For inquiries, call:Customer Service CenterIn case above numbers are not available, call numbers below. (toll free)0077-7-1111570077-7-113113For general, charge, operations (toll free)Business hours 9:00-20:00 (7 days a week)For service canceling procedure in case of loss or theft (toll free)Business hours 24-hour (7 days a week)From xed-line phones:PRESSING ZERO WILL CONNECT YOU TO AN OPERATORAFTER CALLING 157 ON YOUR au CELL PHONEFrom au cell phones:From xed-line phones:From au cell phones:area code not requiredarea code not required(except Okinawa)(Okinawa)0120-977-0330120-977-699Business hours 9:00-21:00 (7 days a week)Keitai Guarantee Service Center0120-925-919For loss, theft or damage(toll free)From xed-line phones/au cell phones,Cell phone and PHS operators collect and recycle unused telephones, batteries and battery chargers at stores bearing the logo regardless of brand and manufacturer to protect the environment and reuse valuable resources. When suddenly brought into a warm place from a cold place, or when used in a humid location, or where temperature suddenly changes such as near the air discharge port of an air conditioner, water droplets (i.e. condensation) sometimes form inside the product. Note that when used under conditions such as this, the humidity might cause corrosion or malfunction. When wiping the display, wipe with a dry soft cloth. Use of a moistened cloth, glass cleaner or other similar liquid might cause malfunction. When connecting an external device to an external connection terminal or an earphone jack, make sure that the connector of external device is straight with the external connection terminal or the earphone jack. Note that applying excessive force with an external device connected to the external connection terminal or the earphone jack might cause damage. Do not discard this product together with regular trash. Please cooperate in the collection of au phone when it is no longer needed to protect the environment and effectively use resources. Old au phones are collected at au shops and other places. Do not insert a card other than microSD memory card into the microSD memory card slot on this product. Do not exert excessive force when attaching/removing a microSD memory card. Doing so might injure your hands or fingers. While writing/reading data to/from a microSD memory card, do not subject the product to vibration or impact, remove the battery pack or turn off the power. Doing so might cause loss of data or malfunction. When hearing the other party's voice, make sure that the earpiece is placed at the center of your ear. If the earpiece (audio output port) is closed by the ear lobe, it may be hard to hear the voice. Even if you cover the microphone to make your voice inaudible to the other party, the other party can hear your voice. Sound from speaker may be very loud when you use hands-free calling. Keep it away from your ears when using it. Do not cover microphone with your fingers, etc. It may make your voice inaudible to the other party and sound difficult to be recorded or detected. When you put a sticker, etc. on the proximity sensor, the sensor will malfunction and indications on the display will turn off at all times while receiving or making a call. In this case, note that you may not be able to operate the product. TouchPanel Use your finger to operate the touch panel. Do not use ballpoint pens, pencils, or other sharp-pointed objects. Using such objects does not only hinder correct operations on the touch panel, but also might cause scratching or damage to the display. Do not put stickers or sheets (e.g. commercially available protective films, peep prevention sheets) on the display. Doing so might cause improper reaction of touch panel. Do not operate the touch panel with fingernails. Doing so might cause split nails or jammed fingers. If the display surface is dirty or wet with sweat or water, it might cause false operations. In such case, wipe the display surface with a dry soft cloth. When carrying the product in your pocket or bag, take care not to put the touch panel close to metals or other conductive materials, as it might cause false operations on the touch panel. Batterypack Use in very hot or cold environments, for example, when left in a car with the windows closed in summer, will cause the battery pack capacity to drop and shorten the available battery usage time. This will also shorten the battery pack service life. Try to use the built-in battery as far as possible at room temperature. When the battery pack is not to be used for a long time, remove the battery pack from the main unit, and store it away from hot and humid places. Charge the battery before using the product for the first time after purchase, or when you have not used the product for a long time. The battery pack is a consumable item. If the performance of a battery pack does not recover after charge, the battery pack is at the end of service life, so buy a new one of the specified type. Note that the length of service life varies depending on the usage conditions, etc. Do not discard battery packs together with regular trash. Please cooperate in the collection of used battery packs to protect the environment and effectively use resources. au shops and other retailers collect used battery packs. The battery pack sometimes swell up as they approach the end of their service life. This is due to the properties of lithium-ion batteries, and is not a problem in terms of safety. Chargingequipment When not using the specified charging equipment (sold separately), remove the plug from the power outlet or cigarette lighter socket. Do not loop the power cord of the specified charging equipment (sold separately) around the charging equipment. Doing so might cause electric shock, overheating, fire, malfunction or injury. Do not forcibly bend the plug of the specified charging equipment (sold separately) or the connection part between the connector and power cord. Doing so might cause electric shock, overheating, fire, malfunction or injury. auMicroICCard(LTE) The au Micro IC Card (LTE) is lent to you by au. In case of loss or damage, the card will be replaced at your expense. When a malfunction is suspected, or in case of theft or loss, contact an au shop or PiPit. Do not forcibly remove or insert the au Micro IC Card (LTE). Be careful not to exert excessive force when inserting the card into your au cell phone. You are responsible for any damage caused by inserting your au Micro IC Card (LTE) into some other IC card reader/writer, etc. Keep the IC (metal) part of your au Micro IC Card (LTE) clean. Wipe the card with a dry soft cloth (such as for cleaning eyeglasses) for cleaning. Do not put stickers, etc. on the au Micro IC Card (LTE). Do not insert the IC card to which a conversion adapter is attached. Doing so might cause malfunction. Camera When using the camera, follow the common etiquette regarding camera use. Image data might be altered or lost due to malfunction, repair or mishandling of the product. The Company takes no responsibility for the recovery of altered or lost data, the damages resulting from altered or lost data, and lost profits. When photographing important occasions (such as a wedding), take a trial shot and check the shot image to make sure it is correctly shot. Do not use the camera for recording commercially available books or information of which photographing is not allowed. Do not leave the camera lens exposed to direct sunlight. Imaging elements might be discolored or burnt. Music/videofunction Do not listen to music or watch videos while driving a car or motorbike, or riding a bicycle. Use of cell phones while driving a car or motorbike is prohibited by law. (Use of cell phones while riding a bicycle may also be punishable by law.) In addition, stay alert to the traffic around you even when walking. Surrounding sounds may not be heard clearly, and gazing at the screen might distract your attention causing a traffic accident. Be especially careful at railroad crossings, on a platform, and at pedestrian crossings. Take care not to listen at ear-splitting volume for a long time, as it might affect hearing. Be careful of sound leakage from earphones in trains or other places with many people around you. Copyrightsandrightsofportrait You are not allowed to copy, distribute, publish, modify or edit the data you shot, recorded or downloaded using the product without the consent of the copyright holder, except for personal use, under the copyright law. In addition, do not use or modify portraits or names of other individuals without their consent, as it might infringe on rights of portrait. Note that shooting and recording may be restricted at some live performances, shows and exhibitions even for personal use. Be careful about the copyright and portrait right when posting images you shot, etc. on Internet homepages. Backupcontentontheproduct Please back up* important content recorded or downloaded for the product to an outside source. Content recorded to memory on the product sometimes disappears or is altered by unexpected factors, such as static electricity or malfunction, repair, mishandling, etc.
* How to make backups: Store important data such as contacts data, music, shot photos and videos on microSD memory cards. You can also send files as mail attachment or transfer to your PC. Note, however, that some data cannot be copied by using these means. Please be forewarned. PUKcode In case the PIN code is locked, you can unlock it by entering the PUK code. PUK code is an eight-digit number given at the time of purchase, which is printed on the back side of the plastic card on which your au Micro IC Card (LTE) is attached. After entering the PUK code, you need to set a new PIN code. If the PUK code is incorrectly entered 10 times in a row, contact an au shop, PiPit or Customer Service Center.
"PIN code" is not reset by initializing the product. Bluetooth/Wireless LAN (Wi-Fi) Function Bluetooth function and wireless LAN (Wi-Fi) function of this product conform to the domestic standards of Japan, FCC standards, and EC directives, and have been certified. Use the wireless LAN (Wi-Fi) function in the 5 GHz band in Japan. The 5 GHz band wireless LAN (Wi-Fi) function of this product conforms to domestic wireless standards in Japan, and has been certified. Use overseas may be subject to punishment by law. The 2.4 GHz band used by wireless LAN (Wi-Fi) and Bluetooth devices is shared by various other devices. For this reason, the communication speed and connectable range may be decreased, or disconnection may occur, due to interference from other devices. Do not use this product in places near electric products, AV and OA equipment, or other magnetized devices or where electromagnetic waves are generated. Subjecting this product to magnetic or electrical noise might increase noise and prevent it from performing communications. (This product is particularly susceptible to noise when it used near a microwave oven.) Using this product near a TV, radio or similar appliance might cause reception interference and disrupt TV images. The searching might not be successful if there are multiple wireless LAN (Wi-Fi) access points near to the product or the same channel is being used. As there are usage restrictions in an airplane, follow the instructions of the airline. The communication speed and connectable range vary depending on the distance between communication devices, obstacles and the devices to connect. 2.4GHzFrequencyBandPrecautions The frequencies used by the Bluetooth and/or wireless LAN (Wi-Fi) function of this product are in the 2.4 GHz band. In this frequency band, other similar wireless stations, in-plant wireless stations for mobile unit identification that require a license to use, such as factory production lines, specific small power wireless stations that do not require licenses, amateur wireless stations (collectively called "other wireless stations" from here on) are operated in addition to home electrical appliances such as microwave ovens, devices for industrial, scientific and medical devices. 1. Before using the product, make sure that "other wireless stations" are not in operation nearby. 2. In the event that instances of radio wave interference have occurred between this product and "other wireless stations", immediately either relocate this product or stop operation of the device (stop the emission of radio waves). 3. If you are unclear on any points or are troubled by anything, contact an au shop or Customer Service Center. AvailableSecurityCodes The product has various security codes that you can use. The available security codes are as follows. Do not forget the security codes you set as they are necessary for operations and contracts. Security code Exampleof usage a Todoremoteoperationofvoicemailandcallforwarding servicesfromalandlinephone b TouseCustomerServiceCenterandtodoinquiries, applications,andmodificationsontheauhomepage Initialvalue A four digit number chosen by the customer and noted on the application form PIN code Exampleof usage Initialvalue 1234 To prevent unauthorized use of the au Micro IC Card (LTE) by third parties PrivacyProtectedFunction The function shown below is installed in the product to protect the privacy of the saved data. Function Screen lock Set Password to secure data when turning on the phone or when unlocking the screen. Description PINCode PINcode To prevent unauthorized use of the au Micro IC Card (LTE) by a third party, you can set the product to require PIN code entry every time the power is turned on. You also need to enter PIN code when setting whether the PIN code entry is required. If the PIN code is incorrectly entered three times in a row, the PIN code will be locked. You can unlock the PIN code using PUK code. PIN code is "1234" and PIN code entry was set to not be required at the time of purchase. You can change PIN code to any four- to eight-digit number, and set the PIN code entry to be required as necessary. memo The connections between this product and all other Bluetooth and wireless LAN (Wi-
Fi) devices have not been confirmed. Therefore, connections with all Bluetooth and wireless LAN (Wi-Fi) devices have not been guaranteed. This product supports security features for wireless communications that are compliant with the Bluetooth and wireless LAN (Wi-Fi) standard specifications, but the security may not be sufficient depending on the usage environment and configuration. Be careful when making data communication using Bluetooth or wireless LAN (Wi-Fi) function. Wireless LAN (Wi-Fi) has the advantage that it can be freely connected anywhere within the radio wave range, as it uses radio waves for exchanging information. At the same time, there is a risk that a malicious third party may obtain unauthorized access if security settings have not been configured. You are recommended to configure security settings before using wireless LAN at your decision and responsibility. The Company assumes no responsibility for leakage of data and information that may occur during Bluetooth/wireless LAN (Wi-Fi) communication. Since Bluetooth and wireless LAN (Wi-Fi) functions use the same frequency band, using the both functions at the same may cause radio wave interference resulting in decreased communication speed or disconnection from the network. If connection fails, stop using either of Bluetooth or wireless LAN (Wi-Fi) functions. Bluetooth and wireless LAN (Wi-Fi) functions of this product use frequencies in the 2.4 GHz band. 2.4FH1/DS4/OF4 Bluetooth function: 2.4FH1 This product uses the 2.4 GHz band. FH-SS is used as the modulation scheme. The interference distance is about 10 m or less. Wireless LAN (Wi-Fi) function: 2.4DS/OF4 This product uses the 2.4 GHz band. DS-SS and OFDM are used as the modulation schemes. The interference distance is about 40 m or less. Bandwidth to use: Full band This means that full band can be used, and that band of mobile unit identification devices can be avoided. Available channels differ depending on the country. For use in an airplane, check with the airline company in advance. IEEE802.11 b/g/n IEEE802.11 a/n W52 W53 W56 5GHzFrequencyBandPrecautions Wireless LAN (Wi-Fi) function of this product uses 5 GHz band. Using the 5.2 GHz band and 5.3 GHz band outdoors is prohibited by the Radio Law. The channels used on the product are as follows. HT20 W52 (5.2 GHz band/36, 40, 44, 48 ch) W53 (5.3 GHz band/52, 56, 60, 64 ch) W56 (5.6 GHz band/100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 ch) HT40 W52 (5.2 GHz band/38, 46 ch) W53 (5.3 GHz band/54, 62 ch) W56 (5.6 GHz band/102, 110, 118, 126, 134 ch) Notes on Packet Communication Charge Since a constant Internet connection is possible with the product, packet communication may be performed automatically by some applications, resulting in high packet communication charges. Therefore, subscription to a packet communication flat late plan/discount service is recommended. On the product to browse websites, download applications, communicate using applications, send/receive e-mails, and configure various settings, connection to the Internet is required, to which packet communication charge applies.
* Packet communication charge does not apply to wireless LAN (Wi-Fi) connection. Applications Be sure to check the security of the application, then install it at your own risk. Some applications might cause virus infection, damage various data, and send out your location information, usage history or personal information stored in your cell phone via the Internet. The Company assumes no responsibility for any operation problems that might be caused by the applications you have installed. In such case, you may be charged a repair fee even during the warranty period. The Company assumes no responsibility for any disadvantage brought to you or any third party by applications you have installed. Depending on applications, microSD memory card is required when using the application. Some applications prohibit the product from entering sleep mode while they are active, or rapidly drain the battery while running in the background. Operational procedures and screen appearances of the applications preinstalled in the product and those installed by you are subject to change without notice as a result of version upgrade. In addition, operating procedures described in this manual may differ from the actual procedures. Specific Absorption Rate (SAR) of Cell Phones This model "LGL25" mobile phone complies with Japanese technical regulations and international guidelines regarding exposure to radio waves. This mobile phone was designed in observance of Japanese technical regulations regarding exposure to radio waves* and limits to exposure to radio waves recommended by a set of equivalent international guidelines. These international guidelines were set out by the International Commission on Non-Ionizing Radiation Protection (ICNIRP), which is in collaboration with the World Health Organization (WHO), and the permissible limits include a substantial safety margin designed to assure the safety of all persons, regardless of age and health condition. The Japanese technical regulations and international guidelines define the limits using a unit of measurement known as the Specific Absorption Rate (SAR), which represents the average amount of radio frequency energy absorbed by the human. The SAR limit for mobile phones is 2.0 W/kg. The highest SAR value for this mobile phone when tested for use at the ear is 0.492 W/kg. The highest SAR value for this mobile phone when tested for use on the body is 0.906 W/kg. There may be slight differences in SAR levels among individual products, but they all satisfy the limit. The actual SAR of this mobile phone while talking on the phone can be well below that indicated above. This is due to automatic changes in the power level of the mobile phone to ensure it only outputs the minimum power required to communicate with a base station. Therefore in general, the closer you are to a base station, the lower the power output of the mobile phone. This mobile phone can be used in positions other than against your ear. Use an accessory such as a carrying case, etc. so that you can hold the product at least 1.5 cm away from your body and also do not contain metal parts between the product and your body. By doing this, this mobile phone complies with Japanese technical regulations and international guidelines regarding exposure to radio waves. The World Health Organization has stated that present scientific information does not indicate that use of mobile devices has any harmful effects on the human body. They recommend that if you are still worried about your exposure then you can limit your talk time or use a handsfree kit to keep the mobile phone away from your head and body. If you would like to know more detailed information, please refer to the WHO website. http://www.who.int/docstore/peh-emf/publications/facts_press/fact_english.htm Please refer to the websites listed below if you would like to know more detailed information regarding SAR. MinistryofInternalAffairsandCommunicationsWebsite:
http://www.tele.soumu.go.jp/j/ele/index.htm AssociationofRadioIndustriesandBusinessesWebsite:
http://www.arib-emf.org/index02.html(inJapaneseonly) auWebsite:
http://www.au.kddi.com/
LGElectronicsInc.Website:
Referto"Specifications"pageofthisproduct. http://www.lg.com/jp/mobile-phone(inJapaneseonly)
(URLaresubjecttochangewithoutnotice.)
* Technical regulations are defined by the Ministerial Ordinance Related to Radio Law
(Article 14-2 of Radio Equipment Regulations). Declaration of Conformity The product "LGL25" is declared to conform with the essential requirements of European Union Directive 1999/5/EC Radio and Telecommunications Terminal Equipment Directive 3.1(a), 3.1(b) and 3.2. This mobile phone complies with the EU requirements for exposure to radio waves. Your mobile phone is a radio transceiver, designed and manufactured not to exceed the SAR* limits** for exposure to radio-frequency (RF) energy, which SAR* value, when tested for compliance against the standard was 0.379 W/kg at the ear, and 0.808 W/kg when worn on the body. To comply with the RF Exposure limits a distance of greater than 1.5 cm must be maintained from the user's body. While there may be differences between the SAR* levels of various phones and at various positions, they all meet*** the EU requirements for RF exposure.
* The exposure standard for mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR.
** The SAR limit for mobile phones used by the public is 2.0 watts/kilogram (W/kg) averaged over ten grams of tissue, recommended by The Council of the European Union. The limit incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.
*** Tests for SAR have been conducted using standard operating positions with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a base station antenna, the lower the power output. European Union Directives Conformance Statement Hereby, LG Electronics Inc. declares that this product is in compliance with:
The essential requirements and other relevant provisions of Directive 1999/5/EC All other relevant EU Directives The above gives an example of a typical Product Approval Number. Wi-Fi(WLAN) This device is intended for sale in Japan only. This equipment may be operated in all European countries. The 5150 - 5350 MHz band is restricted to indoor use only. Important Safety Information AIRCRAFT Switch off your wireless device when boarding an aircraft or whenever you are instructed to do so by airline staff. If your device offers a 'flight mode' or similar feature consult airline staff as to whether it can be used on board. DRIVING Full attention should be given to driving at all times and local laws and regulations restricting the use of wireless devices while driving must be observed. HOSPITALS Mobile phones should be switched off wherever you are requested to do so in hospitals, clinics or health care facilities. These requests are designed to prevent possible interference with sensitive medical equipment. PETROLSTATIONS Obey all posted signs with respect to the use of wireless devices or other radio equipment in locations with flammable material and chemicals. Switch off your wireless device whenever you are instructed to do so by authorized staff. INTERFERENCE Care must be taken when using the phone in close proximity to personal medical devices, such as pacemakers and hearing aids. Pacemakers Pacemaker manufacturers recommend that a minimum separation of 15 cm be maintained between a mobile phone and a pacemaker to avoid potential interference with the pacemaker. To achieve this use the phone on the opposite ear to your pacemaker and do not carry it in a breast pocket. HearingAids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives. NOTE:
Excessive sound pressure from earphones and headphones can cause hearing loss. To prevent possible hearing damage, do not listen at high volume levels for long periods. FCC Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help and for additional suggestions. Warning The user is cautioned that changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. FCC RF Exposure Information This model phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless handsets employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The SAR value for this model handset when tested for use at the ear is 1.00 W/kg and when worn on the body, as described in this user guide, is 1.02 W/kg. Body-worn Operation This phone was tested for typical body-worn operations with the back of the phone kept at a distance of 1.5 cm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 1.5 cm separation distance between your body and the back of the phone. The use of belt clips, holsters and similar accessories should not contain metallic components. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. The FCC has granted an Equipment Authorization for this model handset with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model handset is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/ea/fccid/ after searching on FCC ID ZNFLGL25. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications & Internet Association (CTIA) website at http://ctia.org/. Export Administration Regulations This product and its accessories may fall under the category of application of Japan Export Control Regulations ("Foreign Exchange and Foreign Trade Law" and relevant laws and regulations). U.S. Re-export Regulations (Export Administration Regulations) is applied to this product and its accessories. If you export or re-export this product or its accessories, please follow the necessary procedures at your own risk and expense. For details on the procedures, contact the Ministry of Economy, Trade and Industry or the U.S. Department of Commerce. Intellectual Property Right Trademarks Allcompanynamesandproductnamesinthismanualareeithertrademarksor registeredtrademarks. The microSD logo, microSDHC logo, and microSDXC logo are trademarks of SD-3C, LLC. OpenSSLLicense OpenSSLLicense Copyright1998-2011TheOpenSSLProject.Allrightsreserved. ThisproductincludessoftwaredevelopedbytheOpenSSLProjectforuseinthe OpenSSLToolkit.(http://www.openssl.org/) THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ''AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. OriginalSSLeayLicense Copyright1995-1998EricYoung(eay@cryptsoft.com)Allrightsreserved. This product includes cryptographic software written by Eric Young (eay@cryptsoft.com) THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. OpenSourceSoftwareNoticeInformation To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the product. Others Forsoftwareinstalledinthisproductorpartoftheinstalledsoftware,youare notallowedtochange,translateoradapt,reverse,engineering,decompile, reverseassemblethem,ordoanythingrelatedtotheabove. ThisproductislicensedcomplyingwiththeMPEG-4VisualPatentPortfolio License.Ifyouuseitforprivatepurposewithoutanyprofits,youareallowedto usethemonlywhen:
Recording videos that are compliant with the standard of MPEG-4 Visual (hereinafter referred to as MPEG-4 Video) Playing MPEG-4 Videos recorded personally by consumers not engaged in profit activities Playing MPEG-4 Video supplied from the provider licensed from MPEG-LA Forfurtherutilizingsuchaspromotion,in-houseuseorprofit-makingbusiness, pleasecontactMPEGLA,LLCinU.S. This product has been granted the licenses which code (i) AVC standard compliant video (hereinafter stated as AVC video) based upon the AVC Portfolio License for the individual use of customers, and non-commercial use, and/or the licenses which decode (ii) VC-1 video. (this is restricted to the AVC video that has been coded by customers who are not engaged in individual, and commercial activities, and/
or pertains to the provision of coded AVC video from video providers who have been granted the licenses). For any other purposes, licence is not permitted even for the implied usage. Additional information may be obtained from MPEG LA, LLC. Refer to http://www.mpegla.com This product has been granted the licenses which code (i) VC-1 standard compliant video (hereinafter stated as VC-1 video) based upon the VC-1 Patent Portfolio License for the individual use of customers, and non-commercial use, and/or the licenses which decode (ii) VC-1 video. (this is restricted to the VC-1 video that has been coded by customers who are not engaged in individual, and commercial activities, and/or pertains to the provision of coded VC-1 video from video providers who have been granted the licenses). For any other purposes, licence is not permitted even for the implied usage. Additional information may be obtained from MPEG LA, LLC. Refer to http://www.mpegla.com ForotherMedicalDevices:
Please consult your physician and the device manufacturer to determine if operation of your phone may interfere with the operation of your medical device. Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. LG Electronics Inc. have the rights of using the above trademarks. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. Wi-Fi is registered trademark of Wi-Fi Alliance. iWnn of OMRON SOFTWARE Co., Ltd. is used for conversion methods for Japanese language. iWnn OMRON SOFTWARE Co., Ltd. 2008-2014 All Rights Reserved. Facebook and Facebook logo are trade marks or registered of Facebook, Inc.
"NAVITIME" is a registered trademark of NAVITIME JAPAN Co., Ltd. Firefox, Firefox OS and Firefox logo are trademarks of Mozilla Foundation in U.S.A. The product includes pictograms licensed by NTT DOCOMO, INC. All other company names and product names are trademarks or registered trademarks of respective companies referred to in this manual.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2014-11-17 | 1850.2 ~ 1909.8 | PCE - PCS Licensed Transmitter held to ear | Original Equipment |
2 | 13.56 ~ 13.56 | DXX - Part 15 Low Power Communication Device Transmitter | ||
3 | 2412 ~ 2462 | DTS - Digital Transmission System | ||
4 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
5 | JBP - Part 15 Class B Computing Device Peripheral | |||
6 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 4 5 6 | Effective |
2014-11-17
|
||||
1 2 3 4 5 6 | Applicant's complete, legal business name |
LG Electronics USA, Inc.
|
||||
1 2 3 4 5 6 | FCC Registration Number (FRN) |
0020917688
|
||||
1 2 3 4 5 6 | Physical Address |
1000 Sylvan Ave.
|
||||
1 2 3 4 5 6 |
Englewood Cliffs, New Jersey 07632
|
|||||
1 2 3 4 5 6 |
United States
|
|||||
app s | TCB Information | |||||
1 2 3 4 5 6 | TCB Application Email Address |
t******@pctestlab.com
|
||||
1 2 3 4 5 6 | TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
||||
1 2 3 4 5 6 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
1 2 3 4 5 6 |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
app s | FCC ID | |||||
1 2 3 4 5 6 | Grantee Code |
ZNF
|
||||
1 2 3 4 5 6 | Equipment Product Code |
LGL25
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 4 5 6 | Name |
K******** H****
|
||||
1 2 3 4 5 6 | Title |
Director, Standards & Compliance
|
||||
1 2 3 4 5 6 | Telephone Number |
201-2********
|
||||
1 2 3 4 5 6 | Fax Number |
201-8********
|
||||
1 2 3 4 5 6 |
k******@lge.com
|
|||||
app s | Technical Contact | |||||
1 2 3 4 5 6 | Firm Name |
PCTEST Engineering Laboratory, Inc.
|
||||
1 2 3 4 5 6 | Name |
R****** O********
|
||||
1 2 3 4 5 6 | Physical Address |
6660-B Dobbin Road
|
||||
1 2 3 4 5 6 |
Columbia, Maryland 21045
|
|||||
1 2 3 4 5 6 |
United States
|
|||||
1 2 3 4 5 6 | Telephone Number |
410-2********
|
||||
1 2 3 4 5 6 | Fax Number |
410-2********
|
||||
1 2 3 4 5 6 |
t******@pctestlab.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 4 5 6 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 4 5 6 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 4 5 6 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 05/16/2015 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 4 5 6 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 4 5 6 | Equipment Class | PCE - PCS Licensed Transmitter held to ear | ||||
1 2 3 4 5 6 | DXX - Part 15 Low Power Communication Device Transmitter | |||||
1 2 3 4 5 6 | DTS - Digital Transmission System | |||||
1 2 3 4 5 6 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 3 4 5 6 | JBP - Part 15 Class B Computing Device Peripheral | |||||
1 2 3 4 5 6 | NII - Unlicensed National Information Infrastructure TX | |||||
1 2 3 4 5 6 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Cellular/PCS GSM/EDGE and Cellular WCDMA Phone with WLAN, Bluetooth and RFID | ||||
1 2 3 4 5 6 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 4 5 6 | Modular Equipment Type | Does not apply | ||||
1 2 3 4 5 6 | Purpose / Application is for | Original Equipment | ||||
1 2 3 4 5 6 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 4 5 6 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 4 5 6 | Grant Comments | Power output listed is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 1.00 W/kg, 1.02 W/kg, 1.29 W/kg, and 1.52 W/kg, respectively. This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. | ||||
1 2 3 4 5 6 | Power output is peak conducted. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.68 W/kg, 0.17 W/kg, 0.17 W/kg, and 1.52 W/kg, respectively. | |||||
1 2 3 4 5 6 | Output power is conducted. | |||||
1 2 3 4 5 6 | Power output is conducted. This device uses HT20 and HT40 data rates. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be provided with operating conditions for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.19 W/kg, 0.21 W/kg, <0.1 W/kg, and 1.52 W/kg, respectively. | |||||
1 2 3 4 5 6 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 4 5 6 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 4 5 6 | Firm Name |
SGS Korea Co., Ltd.
|
||||
1 2 3 4 5 6 | Name |
F****** L****
|
||||
1 2 3 4 5 6 | Telephone Number |
82(0)********
|
||||
1 2 3 4 5 6 | Fax Number |
82(0)********
|
||||
1 2 3 4 5 6 |
f******@sgs.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 22H | 824.2 | 848.8 | 2.08 | 2.5 ppm | 247KGXW | ||||||||||||||||||||||||||||||||||
1 | 2 | 22H | 824.2 | 848.8 | 1.915 | 2.5 ppm | 245KG7W | ||||||||||||||||||||||||||||||||||
1 | 3 | 22H | 826.4 | 846.6 | 0.2 | 2.5 ppm | 4M18F9W | ||||||||||||||||||||||||||||||||||
1 | 4 | 24E | 1850.2 | 1909.8 | 0.966 | 2.5 ppm | 247KGXW | ||||||||||||||||||||||||||||||||||
1 | 5 | 24E | 1850.2 | 1909.8 | 0.921 | 2.5 ppm | 246KG7W | ||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 13.56000000 | 13.56000000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC | 2412.00000000 | 2462.00000000 | 0.0920000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
5 | 1 | 15B | 16 CC | ||||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
6 | 1 | 15E | 38 CC | 5180 | 5240 | 0.02 | |||||||||||||||||||||||||||||||||||
6 | 2 | 15E | 38 CC | 5240 | 5320 | 0.018 | |||||||||||||||||||||||||||||||||||
6 | 3 | 15E | 38 CC | 5500 | 5600 | 0.015 | |||||||||||||||||||||||||||||||||||
6 | 4 | 15E | 38 CC | 5650 | 5700 | 0.016 | |||||||||||||||||||||||||||||||||||
6 | 5 | 15E | 38 CC | 5745 | 5825 | 0.017 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC