all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 4 5 6 |
|
Users Manual | Users Manual | 2.11 MiB | ||||
1 2 3 4 5 6 | Cover Letter(s) | |||||||
1 2 3 4 5 6 | External Photos | |||||||
1 2 3 4 5 6 | ID Label/Location Info | |||||||
1 2 3 4 5 6 | Internal Photos | |||||||
1 2 3 4 5 6 | Test Report | |||||||
1 2 3 4 5 6 | Test Setup Photos | |||||||
1 2 3 4 5 6 | Test Report | |||||||
1 2 3 4 5 6 | RF Exposure Info | |||||||
1 2 3 4 5 6 | Test Setup Photos | |||||||
1 2 3 4 5 6 | Test Report | |||||||
1 2 3 4 5 6 | Test Report | |||||||
1 2 3 4 5 6 | Test Report | |||||||
1 2 3 4 5 6 | Test Report |
1 2 3 4 5 6 | Users Manual | Users Manual | 2.11 MiB |
ENGLISH LG-P880 User Guide This guide helps you to get started using your phone. Some of the contents of this manual may not apply to your phone, depending on the software and your service provider. This handset is not suitable for people who have a visual impairment due to the touch screen keyboard. Copyright 2012 LG Electronics, Inc. All rights reserved. LG and the LG logo are registered trademarks of LG Group and its related entities. All other trademarks are the property of their respective owners. Google, Google Maps, Gmail, YouTube, Google Talk and Play Store are trademarks of Google, Inc. Part 15.21 statement
" Change or Modifications that are not expressly approved by the manufacturer could void the user's authority to operate the equipment. Part 15.105 statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. FCC Part 15 Class B Compliance This device and its accessories comply with part 15 of FCC rules and ICES-003 Class B digital apparatus requirements for Industry Canada. Operation is subject to the following two conditions:(1) This device and its accessories may not cause harmful interference, and (2) this device and its accessories must accept any interference received, including interference that may cause undesired operation. Body-worn Operation This device was tested for typical body-worn operations with the back of the phone kept 1.0cm (0.39 inches) between the users body and the back of the phone. To comply with FCC RF exposure requirements, a minimum separation distance of 1.0cm (0.39 inches) must be maintained between the user's body and the back of the phone. Third-party belt-clips, holsters, and similar accessories containing metallic components may not be used. Body-worn accessories that cannot maintain 1.0cm (0.39 inches) separation distance between the user's body and the back of the phone, and have not been tested for typical body-
worn operations may not comply with FCC RF exposure limits and should be avoided. Conformit aux normes FCC Part 15 Class B Cet appareil et ses accessoires sont conformes aux normes FCC Part 15 Class B de la Federal Communications Commission et aux exigences pour appareils numriques ICES-003 Class B dIndustrie Canada.Son fonctionnement est sujet aux deux conditions suivantes :(1) Cet appareil et ses accessoires ne doivent pas provoquer de brouillage prjudiciable, et (2) cet appareil et ses accessoires doivent accepter toutes les interfrences reues, y compris celles pouvant causer un fonctionnement indsirable. Utilisation comme appareil portatif Ce tlphone a t test en vue dune utilisation type comme appareil portatif, avec une distance de 1.0cm (0,39 pouces) entre larrire de lappareil et le corps de lutilisateur. Pour satisfaire aux exigences de la FCC en matire dexposition aux radiofrquences, une distance dau moins 1.0cm (0,39 pouces) doit tre maintenue entre le corps de lutilisateur et larrire du tlphone. Les pinces de ceinture, les tuis et autres accessoires semblables dautres marques et contenant des composantes mtalliques ne doivent pas tre utiliss.Les accessoires portatifs empchant le maintien dune distance de 1.0 cm (0,39 pouces) entre le corps de lutilisateur et larrire du tlphone et qui nont pas t tests en vue dune utilisation type comme accessoires portatifs peuvent ne pas satisfaire aux limites dexposition aux radiofrquences stipules par la FCC et, par consquent, ne doivent pas tre utiliss. Getting to know your phone Before you start using the phone, please read this!
Please check to see whether any problems you encountered with your phone are described in this section before taking the phone in for service or calling a service representative. 1. Phone memory When there is less than 10% of space available in your phone memory, your phone cannot receive new messages. You need to check your phone memory and delete some data, such as applications or messages, to make more memory available. To uninstall applications:
1
> Apps tab > Settings >
Touch Apps from the DEVICE category. Once all applications appear, scroll to and select the application you want to uninstall. Touch Uninstall. 2 3 15 Getting to know your phone 2. Optimising battery life Extend your battery's life between charges by turning off features that you don't need to having running constantly in the background. You can monitor how applications and system resources consume battery power. Extending your phone's battery life:
Turn off radio communications you are not using. If you are not using Wi-Fi, Bluetooth or GPS, turn them off. Reduce screen brightness and set a shorter screen timeout. 16 Turn off automatic syncing for Google Mail, Calendar, Contacts and other applications. Some applications you have downloaded may reduce battery power. To check the battery power level:
> Apps tab > Settings >
Touch About phone from the SYSTEM > Status The battery status (charging or not charging) and level (percentage charged) is displayed at the top of the screen. To monitor and control how battery power is being used:
> Apps tab > Settings >
Touch Power saver from the DEVICE > Battery use from the BATTERY INFORMATION Battery usage time is displayed at the top of the screen. It tells you how long it has been since you last connected your phone to a power source or, if currently connected, how long the phone was last running on battery power. The screen shows the applications or services using battery power, listed in order from the greatest to smallest amount used. 3. Using folders You can combine several app icons in a folder. Drop one app icon over another on a home screen, and the two icons will be combined. NOTE: To see a smaller collection of frequently used apps, touch the Google Apps folder near the bottom of the screen. As with any folder, you can customize its contents. 17 Getting to know your phone NOTE: After you open an app, you can usually adjust its settings by choosing items from its Menu icon near the top or bottom of the screen. 4. Before installing an open source application and OS WARNING If you install and use an OS other than the one provided by the manufacturer it may cause your phone to malfunction. In addition, your phone will no longer be covered by the warranty. 18 WARNING To protect your phone and personal data, only download applications from trusted sources, such as Play Store. If there are improperly installed applications on your phone, it may not work normally or a serious error may occur. You must uninstall those applications and all associated data and settings from the phone. 5. Using the hard reset
(Factory reset) If your phone needs to be restored to its original condition, use hard reset to reboot your phone. 1 When the phone is switched off, press and hold the Volume down key +
Power key with your left hand. When the LED on the bottom of the phone lights up, touch and hold the Menu key with your right hand. You need to do this immediately, before the screen displays the LG logo. Make sure 2 19 Getting to know your phone your left hand is still holding the Volume down and Power keys. Then release the power key at vibration time. When the LG logo is displayed on the screen, continue to hold the keys for around 2 seconds, and then release all them at the same time, before the LG logo disappears. 3 Leave your phone for at least a minute while the hard reset is carried out. You will then be able to switch your phone back on. Caution: If you perform a hard reset, all user applications and user data will be deleted. This cannot be reversed. 20 Remember to back up any important data before performing a hard reset. 6. Opening and switching applications Multitasking is easy with Android because you can keep more than one application running at the same time. There's no need to quit an application before opening another. Use and switch between several open applications. Android manages each application, stopping and starting them as needed to ensure that idle applications don't consume resources unnecessarily. To return to view list recently used applications:
Simply press and hold the Home key. To stop applications:
1
> Apps tab > Settings >
Touch Apps > Running from the DEVICE Scroll and touch the desired application and touch Stop to stop it. 2 7. Installing PC Software
(LG PC Suite)
"LG PC Suite" PC Application is a program that helps you connect your device to a PC via a USB cable and Wi-Fi. Once connected, you can use the functions of your device from your PC. With your "LG PC Suite" PC Application, You Can... Manage and play your media contents
(music, movie, pictures) on your PC. Send multimedia contents to your device. 21 Getting to know your phone Synchronises data (schedules, contacts, bookmarks) in your device and PC. Backup the applications in your device. Update the softwares in your device. Backup and restore the device. Play multimedia contents of your PC from other device. NOTE: You can use the Help menu from the application to find out how to use your "LG PC Suite" PC application. 22 Installing "LG PC Suite" PC Application
"LG PC Suite" PC application can be downloaded from the webpage of LG. 1 Go to www.lg.com and select a country of your choice. Go to Support > Mobile Phone Sup-
port > Select the Model (LG-P880). Click PC Sync from Download, and click WINDOW PC Sync Download to download "LG PC Suite" PC software. 2 3 System Requirements for "LG PC Suite"
PC software OS: Windows XP 32 bit(Service pack 2), Windows Vista 32 bit/64 bit, Windows 7 32 bit/64 bit CPU: 1 GHz or higher processors Memory: 512 MB or higher RAMs Graphic card: 1024 x 768 resolution, 32 bit color or higher HDD: 100 MB or more free hard disk space (More free hard disk space may be needed depending on the volume of data stored.) Required software: LG integrated drivers, Windows Media Player 10 or later NOTE: LG Integrated USB Driver LG integrated USB driver is required to connect an LG device and PC and installed automatically when you install
"LG PC Suite" PC software. 23 Getting to know your phone 8. Synchronising your phone to a Computer Data from your device and PC can be synchronised easily with "LG PC Suite"
PC application for your convenience. Contacts, schedules, and bookmarks can be synchronised. The procedure is as follows:
1 Connect your device to PC. (Use a USB cable or Wi-Fi connection.) After connection, run the program and select the device section from the cat-
egory on the left side of the screen. 2 24 3 4 Click [Personal information] to select. Select the checkbox of contents to synchronise and click the Sync button. 9. Synchronising your phone to a computer via USB NOTE: To synchronise your phone with your PC using the USB cable, you need to install LG PC Suite onto your PC. Please refer to previous pages to install LG PC Suite. 1 2 3 4
> Apps tab > Settings >
Touch Storage from the DEVICE to check out the storage media. (If you want to trans-
fer les from or to a memory card, insert a memory card into the phone.) Connect the phone to your PC using the USB cable. USB connection mode list will appear, and select Media sync (MTP) option. Open the removable memory folder on your PC. You can view the mass storage content on your PC and transfer the les. 5 6 Copy the les from your PC to the drive folder. Select Charge only option to disconnect the phone. TIP! To use the microSD card on your phone again, you need to open the notification drawer and touch
> Charge only. 25 Getting to know your phone To disconnect your phone from the computer:
Open the notification drawer and touch
> Charge only to disconnect your phone from the computer safely. 10. Hold your phone upright Hold your mobile phone vertically, as you would a regular phone. The LG-E610 has an internal antenna. Be careful not to scratch or damage the back of the phone, as this may affect performance. While making/receiving calls or sending/
receiving data, avoid holding the lower part 26 of the phone where the antenna is located. Doing so may affect call quality. 11. When the screen freezes If the screen freezes or the phone does not respond when you try to operate it:
Remove the battery, reinsert it, then turn the phone on. OR Press and hold the Power/Lock key for 10 seconds to turn it off. If it still does not work, please contact the service centre. Device components Earpiece Proximity sensor Camera lens Home key Return to the home screen from any screen. Back key Return to the previous screen. Power/Lock key Switch your phone on/off by pressing and holding this key. Short press to lock/unlock the screen. Menu key Check what options are available. Go to Google Search by pressing and holding this key. 27 Getting to know your phone NOTE: Proximity sensor When receiving and making calls, the proximity sensor automatically turns the backlight off and locks the touch screen by sensing when the phone is near your ear. This extends battery life and prevents you from unintentionally activating the touch screen during calls. WARNING Placing a heavy object on the phone or sitting on it can damage the LCD and touch screen functions. Do not cover the LCD proximity sensor with protective film. This could cause the sensor to malfunction. 28 Volume keys In the home screen: Control ringer volume. During a call: Control your earpiece volume. When playing a track: Control volume continuously. Power/Lock key Earphone Jack Charger/USB port/MHL port Camera lens SIM card slot Battery cover Tip! Once press the volume up and down keys simultaneously, you can use Quick clip function. microSD Card slot Battery Speaker 29 Getting to know your phone Quick Clip You can access Quick clip to memo immediately during using your device. Select whether using background screen or not. Select the pen type and the color. Delete the memo what you made. Share the memo via Memo, Bluetooth, E-mail, Gmail, Google+, Messaging, Picasa or Socail+. Save the memo to the gallary. Set an area to save memo. 30 Installing the SIM card and battery Before you can start exploring your new phone, you'll need to set it up. To insert the SIM card and battery:
1 To remove the battery cover, hold the phone rmly in one hand. With your other hand, lift off the battery cover with your thumbnail as shown in gure. NOTE: Put your thumbnail into the USB port hole and lift off the battery cover. 31 Getting to know your phone 2 Slide the SIM card into the SIM card slot. Make sure the gold contact area on the card is facing downwards. 3 Insert the battery into place by aligning the gold contacts on the phone and the battery (1) and pressing it down until it clicks into place (2). 32 4 Align the battery cover over the battery compartment (1) and press it down until it clicks into place (2). Charging your phone The charger connector is at the bottom of the phone. Insert the charger and plug it into an electrical outlet. 33 Getting to know your phone NOTE The battery must be fully charged initially to improve battery lifetime. Do not open the battery cover during the charging your phone. Using the memory card To insert a memory card:
Insert the memory card into the slot. Make sure the gold contact area is facing downwards. To remove the memory card safely:
> Apps tab > Settings >
Touch Storage from the DEVICE > Unmount SD card > OK. 34 NOTE: The LG-P880 supports memory cards up to 64 GB. WARNING Do not insert or remove the memory card when the phone is on. Doing so may damage the memory card as well as your phone, and the data stored on the memory card may get corrupted. 35 Getting to know your phone To format the memory card:
Your memory card may already be formatted. If it isn't, you must format it before you can use it. NOTE: All files on your memory card are deleted when it is formatted. 1 2 3
> Apps On the home screen, touch tab to open the menu. Scroll and touch Settings > Storage. Touch Unmount SD card and touch OK to con rm it. 36 4 5 Touch Erase SD card > Erase SD card
> Erase everything, then con rm your choice. If you have set a pattern lock, input the pattern lock then select Erase everything. NOTE: If there is content on your memory card, the folder structure may be different after formatting as all the files will be deleted. Locking and unlocking the screen If you do not use the phone for a while, the screen is turned off and locked automatically. This helps to prevent accidental touches and saves battery power. When you are not using the LG-P880, press the Power/Lock key phone. to lock your If there are any programs running when you set lock screen, they may be still running in Lock mode. It is recommended that you exit all programs before entering Lock mode to avoid unnecessary charges (e.g. phone calls, web access and data communications). To wake up your phone, press the Power/
Lock key appear. Touch and slide the lock screen in any direction to unlock your home screen. The last screen you viewed will open. The lock screen will 37 Getting to know your phone Secure your lock screen You can lock your screen so that only you can unlock it to access your phone. To set an Unlock Pattern, PIN or Password for the first time:
Touch screen > Select screen lock > None, Swipe, Face Unlock, Pattern, PIN or Password
> Apps tab > Settings > Lock NOTE:
Precautions to take when using pattern lock. It is very important to remember the unlock pattern you set. You will not be able to access your phone if you use an incorrect pattern 5 times. You have 5 opportunities to enter your unlock pattern, PIN or password. If you have used all 5 opportunities, you can try again after 30 seconds. 38 When you cannot recall your unlock pattern:
If you logged in to your Google account on the phone but failed to enter the correct pattern 5 times, tap the Forgot pattern button. You are then required to log in with your Google account to unlock your phone. If you have not created a Google account on the phone or you forgot it, you have to perform a hard reset. 39 Your Home screen Touch screen tips Here are some tips on how to navigate around your phone. Touch To choose a menu/option or open an application, touch it. Touch and hold To open an options menu or grab an object you want to move, touch and hold it. Drag To scroll through a list or move slowly, drag across the touch screen. Flick To scroll through a list or move quickly, flick across the touch screen (drag quickly and release). NOTE:
To select an item, touch the centre of the icon. Do not press too hard; the touch screen is sensitive enough to pick up a light, firm touch. Use the tip of your finger to touch the option you want. Be careful not to touch any other keys. 40 Home Simply swipe your finger to the left or right to view the panels. You can customise each panel with Apps, Downloads, Widgets and wallpapers. NOTE: Some screen images may be different depending on your phone provider. On your home screen, you can view menu icons at the bottom of the screen. Menu icons provide easy, one-touch access to the functions you use the most. Touch the Phone icon to bring up the touch screen dialpad to make a call. Touch the Contacts icon to open your contacts. Touch the Messaging icon to access the messaging menu. This is where you can create a new message. Touch the Apps icon at the bottom of the screen. You can then view all your installed applications. To open any application, simply touch the icon in the applications list. 41 Your Home screen Customising the Home screen You can customise your home screen by adding Apps, Downloads, Widgets or Wallpapers. For more convenience using your phone, add your favourite apps and widgets to the home screen. To add items on your home screen:
1 Touch and hold the empty part of the home screen. Or touch at the top of the right side. In the Add Mode menu, select items you want to add. You will then see added items on the home screen. 2 42 3 Drag it to the location you want and lift your nger. To remove an item from the home screen:
Home screen > touch and hold the icon you want to remove > drag it to TIP! To add an application icon to the home screen from the Apps menu, touch and hold the application you want to add. Returning to recently-used applications 1 Touch and hold the Home key. The screen displays a pop-up with icons of applications you used recently. Touch an icon to open the application. Or touch the Back key to return to your current application. 2 Notification drawer The notification drawer runs across the top of your screen. 43
>
Your Home screen Touch and slide the notification drawer down with your finger. Touch Notifications. Here you can check and manage Sound profile, Wi-Fi, Bluetooth, GPS, Accounts & sync, Airplane mode, Auto-rotate screen, Brightness, Data enabled, NFC or Portable Wi-fi Hotspot. to manage the Viewing the status bar The status bar uses different icons to display phone information such as signal strength, new messages, battery life, active Bluetooth and data connections. 44 Below is a table explaining the meaning of icons you're likely to see in the status bar. Icon Description Icon Description No SIM card No signal Airplane mode Connected to a Wi-Fi network Wired headset Call in progress Call hold Speakerphone Power saver is on Phone microphone is muted 45 Your Home screen Icon Description Missed call Bluetooth is on System warning Alarm is set New voicemail Ringer is silenced 46 Icon Description NFC is on Vibrate mode Battery fully charged Battery is charging Phone is connected to PC via USB cable Downloading data Icon Description Icon Description Uploading data GPS is acquiring Receiving location data from GPS Data is syncing New Gmail New Google Talk message New message Song is playing FM radio turned on in the background USB tethering is active Portable Wi-Fi hotspot is active 47 Your Home screen Icon Description Both USB tethering and portable hotspot are active Onscreen keyboard You can enter text using the onscreen keyboard. The onscreen keyboard appears automatically on the screen when you need to enter text. To manually display the keyboard, simply touch a text field where you want to enter text. 48 Using the keypad & entering text Tap once to capitalise the next letter you type. Double-tap for all caps. Tap to switch to the numbers and symbols keyboard. You can also touch and hold this tab to view the Settings menu. Tap to enter a space. Tap to create a new line in the message field. Tap to delete the previous character. Entering accented letters When you select French or Spanish as the text entry language, you can enter special French or Spanish characters (e.g. ""). For example, to input "", touch and hold the "a" key until the zoom-in key grows bigger and displays characters from different languages. Then select the special character you want. 49 Google account set up When you first turn on your phone, you have the opportunity to activate the network, to sign into your Google Account and how you want to use some Google services. To set up your Google account:
Sign into a Google Account from the prompted set up screen. OR
> Apps tab > select a Google Touch application, such as Gmail > select New to create a new account. If you have a Google account, touch Existing, enter your email address and 50 password, then touch Sign in. Once you have set up your Google account on your phone, your phone automatically synchronises with your Google account on the web. Your contacts, Gmail messages, Calendar events and other information from these applications and services on the web are synchronised with your phone. (This depends on your synchronisation settings.) After signing in, you can use Gmail and take advantage of Google services on your phone. Connecting to Networks and Devices Wi-Fi With Wi-Fi, you can use high-speed Internet access within the coverage of the wireless access point (AP). Enjoy wireless Internet using Wi-Fi, without extra charges. Connecting to Wi-Fi networks To use Wi-Fi on your phone, you need to access a wireless access point or "hotspot". Some access points are open and you can simply connect to them. Others are hidden or use security features; you must configure your phone to be able to connect to them. 2 Turn off Wi-Fi when you're not using it to extend the life of your battery. NOTE: If you are out of the Wi-Fi zone or set Wi-Fi to OFF, additional charges may be applied by your mobile operator for mobile data use. Turning Wi-Fi on and connecting to a Wi-Fi network 1 Touch Fi from the WIRELESS & NETWORKS Set Wi-Fi to ON to turn it on and start scanning for available Wi-Fi networks.
> Apps tab > Settings > Wi-
51 Bluetooth You can use Bluetooth to send data by running a corresponding application as on most other mobile phones. Connecting to Networks and Devices 3 Tap Wi-Fi menu again to see a list of active and in-range Wi-Fi networks. Secured networks are indicated by a lock icon. Touch a network to connect to it. If the network is secured, you are prompted to enter a password or other credentials. (Ask your network administrator for details) The status bar displays icon that indicate Wi-Fi status. 4 5 52 TIP! With LG-P880, you can enjoy Bluetooth high speed. If the device you want to share files with also supports high speed Bluetooth, the files will automatically be transferred via the high-speed network. To use Bluetooth high speed data transfer, please make sure the Wi-Fi is OFF on your devices before use. The settings for Bluetooth high speed may be different depends on the device. Please check the device's settings with their service provider. Turning on Bluetooth and pairing up your phone with a Bluetooth device You must pair your device with another device before you connect to it. 1
> Apps tab > Settings > Set Touch Bluetooth to ON from the WIRELESS &
NETWORKS Tap Bluetooth menu again. Your phone will scan for and display the IDs of all available Bluetooth in-range devices. If the device you want to pair with isnt on the list, make sure the target device is set to be discoverable, then tap Search for devices again. 2 53 Connecting to Networks and Devices 3 Choose the device you want to pair up with from the list. Once the paring is successful, your device will connect to the device. Sending pictures using Bluetooth 1 2 Select a Picture >
Check whether Bluetooth is ON, then select Search for devices. Choose the device you want to send data to from the list.
> Bluetooth 3 54 Sharing your phone's data connection USB tethering and portable Wi-Fi hotspot are great features when there are no wireless connections available. You can share your phone's mobile data connection with a single computer via a USB cable (USB tethering). You can also share your phone's data connection with more than a single device at a time by turning your phone into a portable Wi-Fi hotspot. When your phone is sharing its data connection, an icon appears in the status bar and as an ongoing notification in the notifications drawer. For the latest information about tethering and portable hotspots, including supported operating systems and other details, visit http://www.android.com/tether. To change Portable Wi-Fi hotspot settings:
Touch from the WIRELESS & NETWORKS >
Portable Wi-Fi hotspot > Choose options that you want to adjust
> Apps tab > Settings > More TIP!
If your computer is running Windows 7 or a recent distribution of some flavours of Linux (such as Ubuntu), you don't usually need to prepare your computer for tethering. But if you're running an earlier version of Windows or another operating system, you may need to prepare your computer to establish a network connection via USB. For the most current information about which operating systems support USB tethering and how to configure them, visit http://www.android.com/tether. 55 Connecting to Networks and Devices To rename or secure your portable hotspot You can change the name of your phone's Wi-Fi network name (SSID) and secure its Wi-Fi network. 1
> Apps On the home screen, touch tab > Settings Touch More from the WIRELESS &
NETWORKS and select Portable Wi-Fi hotspot. Ensure Portable Wi-Fi hotspot is ticked. Touch Con gure Wi-Fi hotspot. The Configure Wi-Fi hotspot dialog box will open. You can change the network SSID (name) that other computers see when scanning for Wi-Fi networks. You can also touch the Security menu to configure the network with Wi-Fi Protected Access 2 (WPA2) security using a pre-
shared key (PSK). 2 3 4 56 If you touch the WPA2 PSK security option, a password field is added to the Configure Wi-Fi hotspot dialog. If you enter a password, you will need to enter that password when you connect to the phone's hotspot with a computer or other device. You can set Open in the Security menu to remove security from your Wi-Fi network. Touch Save. 5 ATTENTION!
If you set the security option as Open, you cannot prevent unauthorised usage of online services by other people and additional charges can be incurred. To avoid unauthorised usage, you are advised to keep the security option active. 57 3 Connecting to Networks and Devices Using the Wi-Fi Cast You can share your music, picture and video content between users who use Android Phones connected via the same Wi-Fi & Wi-
Fi Directed network. Check your Wi-Fi & Wi-Fi Directed network in advance and make sure the users are connected to the same network. 1
> Apps tab > Settings >
Touch More from the WIRELESS & NETWORKS
> Wi-Fi Direct Touch the Wi-Fi Direct checkbox to turn on. Select a device to connect from the scanned device list. Touch Connect. 4 Enabling Wi-Fi Direct to share through SmartShare Wi-Fi Direct automatically scans nearby Wi-
Fi Direct devices and the searched devices are listed as they are found and you can select a specific device to share multimedia data through SmartShare. Wi-Fi Direct cannot be enabled while using other Wi-Fi functions. 2 58 1 2
> Apps tab > Settings >
Touch More from the WIRELESS & NETWORKS
> Wi-Fi Direct Select a device to connect from the scanned device list. CREATE GROUP Touch to activate group owner mode, which enables the legacy Wi-Fi devices to connect by scanning your phone. In this case you must enter the password that is set in Password. NOTE: When your phone becomes a group owner, it will consume more battery power than when it is a client. Wi-Fi Direct connection does not provide Internet service. Additional costs may be incurred when connecting and using online services. Check data charges with your network provider. 59 Connecting to Networks and Devices Using SmartShare SmartShare uses DLNA (Digital Living Network Alliance) technology to share digital content through a Wi-Fi network. Both devices must be DLNA certified to support this feature. To turn SmartShare on and allow sharing contents 1 Touch 2 Press 3 Touch Discoverable checkbox to turn off.
> Apps tab > SmartShare and select Settings. Touch Always accept request to turn on if you would like to automatically accept sharing requests from other devices. Touch Receive files to turn on if you would like to automatically allow upload files to my phone from other devices. Under the Sharing contents section, touch to checkmark the types of content you would like to share. Choose from Pictures, Videos and Music. SmartShare is now activated and ready to share contents. 1 2 60 Connecting to Networks and Devices To share contents from remote content library to other devices Let your renderer device (e.g. TV) play multimedia contents from your remote content library (e.g. PC). 3 4 You can browse the content library. Touch a content thumbnail or press the Menu key and select Play button. To share contents from your phone to your renderer device(e.g. TV) NOTE: Make sure that the DLNA functionality of your devices is properly configured (e.g. TV and PC). 1 2 Touch the top right button to or select the device from renderer lists. Touch the top left button and select the device of the remote content library. NOTE: Make sure that your renderer device is properly configured. 1 While browsing your pictures or videos using the Gallery application, touch to select les. Then you will be able to select multiple les to be shared. 61 Connecting to Networks and Devices 2 Touch Share on the menu and select the SmartShare. SmartShare is automatically launched with the selected les. Select the device from renderer lists to play the les. 3 4 NOTE: Follow the similar steps to use the Music Player, Camera and Video player to share contents. 62 Notice: Check that your device is connected with your home network using Wi-Fi connection to use this application. Some DLNA enabled devices (e.g. TV) support only the DMP feature of DLNA and will not appear in the renderer device list. Your device might not be able to play some contents. To download contents from remote content library 1 2 Touch Touch the top left button and select the device of the remote content library.
> Apps tab > SmartShare 3 4 You can browse the content library. Touch and hold a content thumbnail then touch Download menu key. Notice: A few types of contents are not supported. To upload contents from my phone to remote content library NOTE: Mare sure that SD card is correctly mounted and the Receive files in settings menu is checked. 1 2 3 4 5
> Apps tab > SmartShare Touch Touch the top left button and select My phone. You can browse the content library. Touch and hold a content thumbnail and then touch the Upload menu key. Select a device of remote content library to be uploaded. Notice: Some DLNA enabled devices do not support DMS upload functionality and will not be uploaded. A few types of contents are not supported. 63 Calls Making a call 1 2 to open the keypad. Touch Enter the number using the keypad. To delete a digit, touch the Touch To end a call, touch the End icon
. to make a call. 3 4 TIP! To enter "+" to make international calls, touch and hold
. 64 Calling your contacts 1 2 to open your contacts. Touch Scroll through the contact list or enter the rst few letters of the contact you want to call by touching Search contacts. In the list, touch the contact you want to call. 3 Answering and rejecting a call When you receive a call in Lock state, hold to Answer incoming call. and slide the Hold and slide the incoming call. to Decline an Hold and slide the Quick msg icon from the bottom if you want to send one. TIP! Quick msg You can send a message quickly using this function. This is useful if you need to reply the message during a meeting. Adjusting call volume To adjust the in-call volume during a call, use the Volume up and down keys on the left-hand side of the phone. Making a second call 1 to make the call. During your rst call, touch Menu >
Add call and dial the number. Also, you can go recent dialled list by touching or can search contacts by touching and select the number you want to call. Touch Both calls are displayed on the call screen. Your initial call is locked and put on hold. Touch the displayed number to toggle between calls. Or touch to make a conference call. Merge call 2 3 4 65 Calls 5 To end active calls, touch End or press Home Key and slide the noti cation bar down and select End call icon
. NOTE: You are charged for each call you make. Viewing your call logs On the home screen, touch the Call logs tab View a complete list of all dialled, received and missed voice calls. and choose
. TIP! Touch any call log entry to view the date, time and duration of the call. TIP! Press the Menu key, then touch Delete all to delete all the recorded items. Call settings You can configure phone call settings such as call forwarding and other special features offered by your carrier. 66 1 2 3
. On the home screen, touch Touch menu. Tap Call settings and choose the op-
tions that you want to adjust. Fixed dialing numbers To turn on and compile a list of numbers that can be called from your phone. Youll need your PIN2, which is available from your operator. Only numbers within the fixed dial list can be called from your phone. Voicemail service Allows you to select your carriers voicemail service. Voicemail settings If you are using your carriers voicemail service, this option allows you to enter the phone number to use for listening to and managing your voicemail. Save unknown numbers Add unknown numbers to contacts after a call. Call reject Allows you to set the call reject function. Choose from Disabled, Reject calls on list or Reject all calls. Quick messages When you want to reject a call, you can send a quick message using this function. This is useful if you need to reject a call during a meeting. 67 Calls Call forwarding Choose whether to divert all calls, when the line is busy, when there is no answer or when you have no signal. Call barring Select when you would like calls to be barred. Enter the call barring password. Please check with your network operator about this service. Call duration View the duration of calls including all calls, dialled calls, received calls and last call. Call costs View the charges applied to your calls. (This service is network 68 dependent; some operators do not support this function) Additional settings This lets you change the following settings:
Caller ID: Choose whether to display your number on an outgoing call. Call waiting: If call waiting is activated, the handset will notify you of an incoming call while you are on the phone
(depending on your network provider). Contacts Add contacts to your phone and synchronise them with the contacts in your Google account or other accounts that support contact syncing. Searching for a contact In the home screen 1 2 Touch Touch Search contacts and enter the contact name using the keyboard. to open your contacts. Adding a new contact 1
, enter the new contact's num-
Touch ber, then press the Menu key. Touch Add to Contacts > Create new contact. If you want to add a picture to the new contact, touch the image area. Choose from Take photo or Select from Gallery. Select the contact type by touching
. Touch a category of contact information and enter the details about your contact. Touch Save. 2 3 4 5 69 Contacts Favourite contacts You can classify frequently called contacts as favourites. Adding a contact to your favourites 1 2 3 Touch Touch a contact to view their details. Touch the star to the right of the contact's name. The star turns colorful. to open your contacts. 70 to open your contacts. Removing a contact from your favourites list 1 2 Touch tab, select Favourites at Touch the the top of the list and choose a contact to view its details. Touch the colorful star to the right of the contact's name. The star turns grey and the contact is removed from your favourites. 3 Moving contacts from your Old Device to your New Device Export your contacts as a CSV file from your old phone to your PC using a PC sync program. 1 Install LG PC Suite on the PC rst. Run the program and connect your Android mobile phone to the PC using a USB cable. On the top menu, select Device >
Import to device > Import contacts. A popup window to select the le type and a le to import will appear. 2 3 4 5 6 7 8 9 On the popup, click the Select a le and Windows Explorer will appear. Select the contacts le to import in Windows Explorer and click the Open. Click OK. A Field mapping popup to link the contacts in your device and new contacts data will appear. If there is a con ict between the data in your PC contacts and device contacts, make the necessary selections or modi -
cations in LG PC Suite. Click OK. 71 Messaging Your LG-P880 combines SMS and MMS into one intuitive, easy-to-use menu. Sending a message 1 on the home screen, and to open a blank message. Touch touch Enter a contact name or contact number in the To eld. As you enter the contact name, matching contacts appear. You can touch a suggested recipient. You can add multiple contacts. 2 72 NOTE: You will be charged for a text message for every person you send the message to. 1 2 3 Touch Enter message eld and start to compose your message. Press Choose from Add subject, Discard, At-
tach, Insert smiley and All messages. Touch Send to send your message. to open the Options menu. 4 The message screen opens, with your message after Recipient Name/Number. Responses appear on the screen. As you view and send additional messages, a message thread is created. WARNING: The 160-character limit may vary from country to country depending on the language and how the SMS is coded. WARNING: If an image, video or audio file is added to an SMS message, it is automatically converted into an MMS message and you are charged accordingly. Threaded box Messages (SMS, MMS) exchanged with another party can be displayed in chronological order so that you can conveniently see an overview of your conversation. 73 Messaging Using Smilies Liven up your messages using Smilies. When writing a new message, press the Menu key, then choose Insert smiley. Changing your message settings Your LG-P880 message settings are predefined, so you can send messages immediately. You can change the settings based on your preferences. 74 E-mail You can use the Email application to read emails from services other than Google Mail. The Email application supports the following account types: POP3, IMAP and Exchange. Your service provider or system administrator can provide the account settings you need. Managing an email account The first time you open the E-mail application, a setup wizard opens to help you to set up an email account. To add another email account:
> Apps tab > E-mail > in
> Add Touch the account screen, touch account After the initial setup, Email displays the contents of your inbox. If you have added more than one account, you can switch among accounts. To change an email account's setting:
> Apps tab > E-mail > in the Touch account screen, touch
> Settings 75 E-mail To delete an email account:
> Apps tab > E-mail > in the Touch account screen, touch account > touch an account you want to delete > Delete
> Remove Email account screen You can touch an account to view its Inbox. The account from which you send email by default is indicated with a tick. Touch the folder icon to open the account folders. 76 Only the most recent emails in your account are downloaded to your phone. Working with account folders Each account has an Inbox, Outbox, Sent and Drafts folder. Depending on the features supported by your account's service provider, you may have additional folders. Composing and sending email To compose and send a message 1 While in the E-mail application, touch the
. connected to a network again. If it con-
tains any pending messages, the Outbox is displayed on the Accounts screen. TIP! When a new email arrives in the inbox, you will receive a notification by sound or vibration. Tap the email notification to stop notifications. 2 3 4 5 Enter an address for the message's intended recipient. As you enter text, matching addresses are offered from your Contacts. Separate multiple ad-
dresses with semicolon. Add Cc/Bcc and add attachment les if required. Enter the text of the message. Touch the If you aren't connected to a network, for example, if you're working in airplane mode, the messages that you send are stored in your Outbox folder until you're
. 77 Camera Getting to know the viewfinder Switch lenses Switch between the rearfacing camera lens and the frontfacing camera lens. Zoom Zoom in or zoom out. Alternatively you can use the zoom in or out by pinching in or out. Time machine shot Touch this icon to capture the missing moment before pressing the shutter. Shot mode Choose from Normal, HDR, Panorama or Continuous shot. Settings Touch this icon to open the Settings menu. Video mode Touch this icon to switch to video mode. Taking a photo Gallery Touch to view the last photo you captured. This enables you to access your gallery and view saved photos within camera mode. 78 Taking a quick photo 1 2 Open the Camera application. Hold the phone, point the lens towards the subject you want to photograph. Touch the screen and a focus box will appear in the view nder screen. When the focus box turns green, the camera has focused on your subject. Click on the to capture the photo. 3 4 5 Once you've taken the photo Touch captured. to view the last photo you Touch to share your photo using Bluetooth, E-mail, Gmail, Google+, Memo, Messanging, Picasa, SmartShare and Social+. TIP! If you have an SNS account and set it up on your phone, you can share your photo with the SNS community. 79 Camera Touch to delete the image. to open the options. Touch Set image as Touch to use the image as a Contact photo, Lockscreen Wallpaper or Wallpaper. Move Touch to move the image to other place. Rename Touch to edit the name of the selected picture. Rotate left/right To rotate left or right. Crop Crop your photo. Move your finger across the screen to select the area. Edit View and edit the picture. 80 Select the image resolution. If you choose the high resolution, the file size will increase, which means you will be able to store fewer photos in the memory. lighting conditions. pictures. Applies artistic effects to the pictures. Applies the additional options for Improves colour qualities in different Slideshow Auto review automatically shows you the picture you just recorded. Details Show the picture information. Using the advanced settings In the viewfinder, touch to open all advanced options. Allows you to turn on the flash when taking a photo in dark conditions. This defines and controls the amount of sunlight entering the image. Focuses on the specific spot. Select the image resolution. If you choose the high resolution, the file size will increase, which means you will be able to store fewer photos in the memory. Finds the color and light settings appropriate for the current environment. Choose from Normal, Portrait, Landscape, Sports, Sunset or Night. The ISO rating determines the sensitivity of the camera's light sensor. The higher the ISO, the more sensitive the camera is. This is useful in darker conditions when you cannot use the flash. Improves colour qualities in different lighting conditions. 81 Camera Applies artistic effects to the pictures. Set a delay after the capture button is pressed. This is ideal if you want to be in the photo. Activate to use your phone's location-
based services. Take pictures wherever you are and tag them with the location. If you upload tagged pictures to a blog that supports geotagging, you can see the pictures displayed on a map. NOTE: This function is only available when GPS is active. Select one of some shutter sounds. It automatically shows you the picture you just took. Select storage to save images. Restore all camera default settings. Touch whenever you want to know how this function operates. This provides you with a quick guide. 82 TIP! When you exit the camera, some settings return to their defaults, such as white balance, colour tone, timer and scene mode. Check these before you take your next photo. TIP! The Settings menu is superimposed over the viewfinder so, when you change elements of the image colour or quality, you see a preview of the image change behind the Settings menu. 83 Video camera Getting to know the viewfinder Switch lenses Switch between the rearfacing camera lens and the front-facing camera lens. Zoom Zoom in or zoom out. Alternatively you can use the zoom in or out by pinching in or out. Brightness This defines and controls the amount of sunlight entering the video. Live effect Live effect provides various visual effects when taking a video. Settings Touch this icon to open the settings menu. Camera mode Touch this icon to switch to camera mode. Start recording Gallery Touch to view the last video you recorded. This enables you to access your gallery and view your saved videos from within video mode. 84 Shooting a quick video 1 2 Touch the Camera mode button. The video camera view nder appears on the screen. Holding the phone, point the lens towards the subject you want to capture in your video. Press the Record recording. A red light appears at the top corner of the view nder with a timer showing the length of the video. button once to start 3 4 5 Tip!
Touch to capture image during recording a video. 6 Touch ing. on the screen to stop record-
After shooting a video Your captured video will appear on the Gallery. Touch captured. to view the last video you Touch to play the video. Touch to share the video Bluetooth, 85 Video camera E-mail, Gmail, Messanging, SmartShare or YouTube. Touch to delete the video you just made. to open the options. Confirm by touching OK. The viewfinder reappears. Touch Move Touch to move the video to other place. Rename Tap to edit the name of the selected video. Details Tap to see a detailed information, such as the name, date, time, size and type. 86 Using the advanced settings Using the viewfinder, touch the advanced options. to open all Allows you to turn on the flash when recording a video in dark conditions. Touch to set the size (in pixels) of the video you are recording. Improves colour qualities in different lighting conditions. Choose a colour tone to use for your new view. Activate to use your phone's location-
based services. Adjusting the volume when viewing a video To adjust the volume of a video while it is playing, use the volume keys on the left-
hand side of the phone. Choose Off to record a video without sound. Auto review automatically shows you the video you just recorded. Select storage to save videos. Restore all video camera default settings. Touch if you want to know how this function operates. This provides you with a quick guide. 87 Multimedia You can store multimedia files on a memory card for easy access to all your multimedia files. Video Player Your LG-P880 has a built-in video player that lets you play all your favourite videos. To access the video player, Touch tab > Video Player.
> Apps 88 Playing a video 1 In the home screen, touch tab > Video Player. Select the video you want to play. 2
> Apps Touch to pause playback a video. Touch to resume playback a video. Touch to go 10 seconds forward. Touch to go 10 seconds backward. Touch to manage the video volume. Touch to set Dolby audio effect when connected with headset jack. Touch Speed controller icon and drag the progress bar to control playback speed. Touch Preview frame icon and drag the handler of seek bar to explore the content with a preview screen. Touch to lock a video screen. Touch the direct list icon to see the list of videos. To change the volume while listening to music, press the up and down volume keys on the left-hand side of the phone. Touch and hold any song in the list. It displays SmartShare, Delete and Details as options. Gallery
> Apps tab > Gallery. Open Touch a list of catalogue bars that store all your multimedia files. 89 Multimedia Music Player Your LG-P880 has a built-in music player that lets you play all your favourite tracks. To
> Apps access the music player, Touch tab > Music Player. Transferring music files using USB mass storage devices 1 Connect the LG-P880 to a PC using a USB cable. If you haven't installed LG Android Platform Driver on your PC, you need to change the settings manually. Choose 2 90 Settings > Connectivity > USB Con-
nection type, then select Media sync
(MTP). You can view the mass storage content on your PC and transfer the les. 3 Playing a song 1 In the Home screen, touch tab > Music Player. Touch Songs. Select the song you want to play. 2 3
> Apps Touch to pause playback. Touch to resume playback. Touch to skip to the next track in the album, playlist. Touch to go back to the beginning of the song. Touch twice to return to the previous song. Touch to manage the music volume. Touch to set repeat mode. Touch to set shuffle mode. Touch to see the current playlist. Touch to see lyrics. This option is on only if the song includes the lyrics. To change the volume while listening to music, press the up and down volume keys on the left-hand side of the phone. Touch and hold any song in the list. It displays Play, Add to playlist, Set as ringtone, Delete, Share, Search and Details as options. 91 Multimedia NOTE: Music file copyrights may be protected by international treaties and national copyright laws. Therefore, it may be necessary to obtain permission or a licence to reproduce or copy music. In some countries, national laws prohibit private copying of copyrighted material. Before downloading or copying the file, check the national laws of the relevant country concerning the use of such material. FM Radio Your LG-P880 has a built-in FM Radio so you can tune in to your favourite stations and listen on the go. NOTE: You need to use your headphones to listen to the radio. Insert it into the headphone jack. Searching for stations You can tune in to radio stations by searching for them manually or automatically. They are then saved to 92 specific channel numbers, so you don't have to find them again. You can store up to 48 channels on your phone. Tuning in automatically 1
, then select Auto scan. In the home screen, touch tab > FM Radio. Touch During auto scanning, touch Stop if you want to stop scanning. Only scanned channels are saved before you stop scanning.
> Apps 2 3 NOTE: You can also manually tune in to a station using the on-screen wheel. TIP! To improve radio reception, extend the headset cord as this also functions as the radio antenna. If you connect a headset not specifically made for radio reception, radio reception may be poor. 93 Multimedia LG Tag+
What is LG Tag+
LG Tag+ allows easy saving and loading to NFC tag, which can be customized to suit certain environments. Using Tag+ writing 1 2 Touch Select the desired mode (Car/Of ce/
Sleep/User mode settings) and tap Write on tag. Touch the back of your device to a tag or a device to share, then launching
> Apps tab > LG Tag+. 3 94 application and changing settings can be set. Using Tag+ reading When touching the set tag or a device, mode will be activated right away. Media Home Using media home 1 2 Touch Select the desired funcion among of videos, photos, music.
> Apps tab > Media Home Setting media home 1
> Apps tab > Media Home Touch
> Settings You can change the settings based on your preferences. 2 Tip!
Once you connect your device to a TV or monitor via a MHL cable, media home apps will be launch automatically. 2 3 Using dual display You can use the dual-display fuction using a MHL cable. 1 Touch the Home key during playing video by the video player or the media home, after you connect your device to a TV or a monitor via a MHL cable. Select the dual-display mode on the Then you can use your device during displaying contents via a TV or a monitor at the same time. 95 Multimedia NOTE:
MHL(Mobile High-definition Link) is a mobile audio/video interface standard for connecting portable electronics devices to high-definition TV or monitor. Any contents may not be displayed on the TV or monitor due to the H/W performance, memory limits, screen resolution, etc. 96 LG SmartWorld LG SmartWorld offers an assortment of exciting content - games, applications, wallpaper and ringtones - giving LG phone users the chance to enjoy richer "Mobile Life" experiences. How to Get to LG SmartWorld from Your Phone 1 icon to access LG Smart-
Tap the World. Tap Sign in and enter ID/PW for LG SmartWorld. If you have not yet signed up, tap Register and get a LG Smart-
World membership. 2 3 Download the content you want. icon?
NOTE: What if there is no 1 Using a mobile Web browser, access LG SmartWorld (www. lgworld.com) and select your country. 2 Download LG SmartWorld App. 3 Execute and install the downloaded file. 4 Access LG SmartWorld by tapping the icon. 97 LG SmartWorld How to use LG SmartWorld Participate in monthly LG SmartWorld promotions. Try the easy "Menu" buttons to find what youre looking for fast. Categories Find contents by category
(e.g. Education, Entertainment, Games, etc). Search Search Content. Apps for you Recommended content based on your previous choices. 98 My apps List of downloaded/to-be updated contents. Settings Set Profile and Display. Sign in Set your ID and Password. Try other useful functions as well. (Content Detail screen) NOTE: LG SmartWorld may not be available in all carriers or countries. Utilities Setting your alarm 1 2 3
> Apps tab > Alarm/Clock Touch
>
After you set the time, the LG-P880 lets you know how much time is left before the alarm will sound. Set Repeat, Snooze duration, Vibra-
tion, Alarm tone, Puzzle lock and Memo. Touch Save. Using your calculator 1 2
> Apps tab > Calculator Touch Touch the number keys to enter numbers. For simple calculations, touch the function you want (+, , x or ) followed by =. For more complex calculations, touch
, select the Advanced panel, then 3 4 choose sin, cos, tan, log and so on. 99 Utilities Adding an event to your calendar 1 2
> Apps tab > Calendar Touch On the middle of the screen, you can nd the different view types of the Calendar
(Day, Week, Agenda). Tap on the date you want to add event on and touch Or Drag the view screen upwards and tap on the time slot you want to add event in. Touch Event name then enter the event name. 3 4 100 5 6 7 8 Touch Location and enter the location. Check the date and enter the time you want your event to start and nish. If you want to add a note to your event, touch Description and enter the details. If you want to repeat the alarm, set REPEAT, and set REMINDERS, if necessary. Touch Save to save the event in the calendar. Polaris Office Polaris Office is a professional mobile office solution that lets users conveniently view various types of office documents, including Word, Excel and PowerPoint files, anywhere, anytime, using their mobile devices. Touch Managing files Polaris Office provides mobile users with convenient file management features, including copying, moving and pasting, and deleting files and folders right on the device.
> Apps tab > Polaris Office. Viewing files Mobile users can now easily view a wide variety of file types, including Microsoft Office documents and Adobe PDF, right on their mobile devices. When viewing documents using Polaris Office, the objects and layout remain the same as in their original documents. 101 Utilities Backup About backing up and restoring smart phone data It recommends that you regularly create and save a backup file on the Storage card, especially before you update any software. Maintaining a current backup file on Storage memory might allow you to recover smart phone data if your smart phone is lost, stolen, or corrupted by an unforeseen issue. This Backup application support between LG smart phones, other S/W version or OS. And so, when you buy the new LG smart phone, you can back up the current LG-P880 smart phone data on your new one. If you have preloaded application Backup &
Restore on your smart phone, you can back up and restore most of your smart phone data, Applications including unprotected applications, their settings, Applications
(Downloaded), Applications (Pre-
installed), Bookmarks, Calendar, Call log, Contacts, Home screen, Messages, and System settings using this application. To perform a manual backup of your smart phone data. 102 To schedule automatic backups of your smart phone data. To restore your smart phone data. Back up your smart phone data 1 Insert to the memory card into the slot and check out the storage status. Touch the Apps tab
, and then select Backup > Backup > Storage Card or Internal Memory. Touch the Add new to enter a name for your backup le, and then select Continue. 2 3 4 5 Select the check box next to the item you want to back up, and then select Continue to back up. When all selected les backed up, you will see the message Done and select Continue to nish backing up data. Scheduling automatic backups You can also enable automatic backups of the data on your smart phone according to your schedule setting. To do this, complete the following steps:
103 3 2
, and then select Utilities 1 Insert to the memory card into the slot and check out the storage status. Touch the Apps tab Backup > Schedule. On the Scheduled Backup Location screen, touch Storage Card or Internal Memory. From the list, select how often you want to back up your device data and settings, and select Continue. Select the check box next to the data you want to back up, and then select Continue to nish the schedule set. 4 5 Restoring smart phone data To restore data that is in your on-board device memory, mass storage mode must be turned off. NOTE: All files that are stored on your smart phone are deleted before the backup file is restored. 1 2 Insert to the memory card into the slot and check out the storage status. Touch the Apps tab
, and then select Backup > Restore > Storage Card or Internal Memory. 104 3 4 On the Restore screen, select a backup le that contains the data you want to restore. Select the check box next to the item you want to restore, and then select Continue to restore to phone. NOTE: Please note that your phone data will be overwritten with the contents of your backup. 1 If the backup le is encrypted, type the password that you set to encrypt. 2 When all selected les restored, you will see the message Done and select Yes to restart the phone. NOTE:
While in Mass storage mode, this Back & Restore Application cannot be functioned. Select Charge only option when the USB cable is connected. You can set Enable encryption to encrypt your backup files for extra protection. 105 from the Backup Utilities Press the Menu screen, and select Settings > Security and select the check box. And after enabling encryption, To restore synchronised organizer data, you must have an activation password. NOTE:
You can also enable automatic delete old backups and only keep the most recent backup. Press the Menu from the Backup screen, and select Settings > Scheduled backup >
Auto delete old backups to select the number of scheduled backups to keep. 106 The web Internet Browser gives you a fast, full-colour world of games, music, news, sport, entertainment and much more, right on your mobile phone. Wherever you are and whatever you enjoy. NOTE: Additional charges apply when connecting to these services and downloading content. Check data charges with your network provider. Using the web toolbar Touch to go back a page. Touch to go forwards a page, to the page you connected to after the current one. This is the opposite of what happens when you press the Back key, which goes to the previous page. While holding down the icon, tilt the device toward body to zoom in or reverse to zoom out. Touch to add a new window. Touch to access bookmarks. 107 Save for offline reading Save current page to read it during offline. Brightness Modify viewing brightness for comfortable web browsing. Settings Displays Browser settings. Exit Exit from the menu list. to view options. The web Using options Press Refresh Update the current web page. Save to bookmarks Add the current web page as bookmark. Go to Homepage Allow you to go to a homepage. Share page Allows you to share the web page with others. Find on page Allows you to find letters or words on the current web page. Request desktop site Allows you to view the web page as desktop. 108
> Apps tab Settings In the home screen, touch
> Settings. WIRELESS & NETWORKS Here, you can manage Wi-Fi and Bluetooth. You can also set up mobile networks and switch to airplane mode.
< Wi-Fi >
Wi-Fi Turns on Wi-Fi to connect to available Wi-Fi networks. Wi-Fi settings Allows you to set up and manage wireless access points. Set network notification or add a Wi-Fi network. The advanced Wi-Fi settings screen is accessed from the Wi-Fi settings screen. Press the and touch Advanced. TIP! How to obtain the MAC address To set up a connection in some wireless networks with MAC filters, you may need to enter the MAC address of your LG-P880 into the router. You can find the MAC address in the following user interface: Touch Apps tab > Settings > Wi-Fi >
Advanced > MAC address.
>
109 Settings
< Bluetooth >
Turns on Bluetooth to connect to Bluetooth devices.
< Data usage >
Displays the data usage and set mobile data limit.
< Call >
You can configure phone call settings such as call forwarding and other special features offered by your carrier.
< More >
Airplane mode After switching to airplane mode, all wireless connections are disabled. Wi-Fi Direct You can turn on or off. Portable Wi-Fi hotspot You can configure the portable Wi-Fi hotspot settings. NFC Your LG-P880 is NFC-enabled mobile phone. NFC (Near Field Communication) is a wireless connectivity technology that enables two-way communication between electronic devices. It operates over a distance of a few centimeters. You can share your contents with a NFC tag or another device via simple 110 touch with your device. If you touch a NFC tag with your device, it will display the tag contents on your device. NOTE: Be careful not to scratch or damage the inside of the battery cover as this is the NFC antenna. To switch NFC on or off: From the home screen, touch and slide the notification drawer down with your finger, then select the NFC icon to turn it on. NOTE: When the Airplane mode is activated, NFC application can be used. Using NFC: To use NFC, make sure your device is switched on and activate the NFC setting, if disabled. Android Beam You can beam a web page, a video, or other content from your screen to another device by bringing the devices together (typically back to back). 111 Settings NOTE: Make sure both devices are unlocked, support Near Field Communication (NFC), and have both NFC and Android Beam turned on. VPN settings Displays the list of Virtual Private Networks (VPNs) that you've previously configured. Allows you to add different types of VPN. Mobile networks Set options for data roaming, network mode & operators, access point names (APNs) and so on. 112 NOTE: You must set a lock screen PIN or password before you can use credential storage. DEVICE
< Sound >
Sound profile You can choose the Sound, Vibrate only or Silent. Volumes You can manage the volume of music, video, games, other media, Ringtone
& notifications. Touch feedback & system. Phone ringtone Allows you to set your default incoming call ringtone. Notification sound Allows you to set your default notification ringtone. Ringtone with vibration Vibration feedback for calls and notifications. Quiet time Set times to turn off all sounds except alarm and media. Dial pad touch tones Allows you to set the phone to play tones when using the dialpad to dial numbers. Touch sounds Allows you to set your phone to play a sound when you touch buttons, icons and other onscreen items that react to your touch. Screen lock sound Allows you to set your phone to play a sound when locking and unlocking the screen. Vibrate on touch Allows you to set the vibration feedback for phone screen touch.
< Display >
Brightness Adjust the screen brightness. Auto-rotate screen Set to switch orientation automatically when you rotate the phone. Screen timeout Set the time for screen timeout. 113 Settings Font type Change the type of the display. Font size Change the size of the display font. Front key light Set the front key LED time. Motion sensor calibration Improve the accuracy of the tilt and speed of the sensor.
< Home screen >
Set the Theme, Animation, Screen effect or Wallpaper. 114
< Lock screen >
Select screen lock Set a screen lock type to secure your phone. Opens a set of screens that guide you through drawing a screen unlock pattern. You can set among of None, Swipe, Face Unlock, Pattern, PIN, Password. When you turn on your phone or wake up the screen, you're asked to draw your unlock pattern to unlock the screen. Wallpaper You can select the wallpaper lock from Wallpapers or Gallery. Owner info Show owner info on lock screen.
< Gesture >
Move home screen items - Press and hold item and hold item within home screens or applications. Tilt sensitivity Test and adjust sensitivity of tilt sensor for home screen and applications. Pending incoming calls Flip device to mute incoming call. Snooze or stop alarm Flip device to snooze or stop alarm. Pause video Flip device to pause playing video. Help Help for gesture functions.
< Storage >
INTERNAL STORAGE View the internal storage usage. SD CARD Check total available SD card space. Touch Unmount SD card for safe removal. Erase SD card if you want to delete all data from the SD card.
< Power saver >
Here, you can manage the battery and check the power saving items. Also, you can check the battery use. 115 Settings
< Apps >
You can view and manage the applications. PERSONAL
< Accounts & sync >
Permits applications to synchronise data in the background, whether or not you are actively working in them. Deselecting this setting can save battery power and lowers
(but does not eliminate) data usage. 116
< Location services >
Google's location service If you select Google's location service, your phone determines your approximate location using Wi-Fi and mobile networks. When you select this option, you're asked whether you consent to allowing Google to use your location when providing these services. GPS satellites If you select GPS satellites, your phone determines your location to street level accuracy. Location & Google search If you select google use your location to improve search results and other services.
< Security >
Set up SIM card lock Set up SIM card lock or change the SIM PIN. Make passwords visible Show password as you type. Device administrators View or deactivate device administrators. Unknown sources Default setting to install non-Market applications. Trusted credentials Display trusted CA certificates. Install from storage Choose to install encrypted certificates from your SD card. Clear credentials Remoce all certificates.
< Language & input >
Use the Language & input settings to select the language for the text on your phone and for configuring the on-screen keyboard, including words you've added to its dictionary.
< Backup & reset >
Change the settings for managing your settings and data. Back up my data Set to back up your settings and application data to the Google server. 117 Settings Backup account Set to back up your account. Automatic restore Set to restore your settings and application data when the applications are reinstalled on your device. Factory data reset Reset your settings to the factory default values and delete all your data. If you reset the phone in this way, you are prompted to reenter the same information as when you first started Android. SYSTEM
< Date & time >
Use Date & time settings to set how dates are displayed. You can also use these settings to set your own time and time zone rather than obtaining the current time from the mobile network.
< Accessibility >
Use the Accessibility settings to configure accessibility plug-ins you have installed on your phone. 118 NOTE: Requires additional plug-ins.
< Connectivity >
USB connection type You can set the desired mode (Charge only, Media sync
(MTP), USB tethering or LG software). Ask on connection Ask USB connection mode when connecting to a computer. Help Help for connectivity. On-Screen Phone settings Displaying screen and controlling phone from PC are available through USB, Bluetooth or Wi-Fi connection. PC Suite Wi-Fi connection Check mark this to use LG PC Suite with Wi-Fi connection. Please note that Wi-Fi network should be connected for LG PC Suite via Wi-
Fi connection from the WIRELESS &
NETWORKS.
< About phone >
View legal information and check phone status and software version. 119 Settings Phone software update LG Mobile phone software update from the Internet For more information about using this function, please visit http://update.lgmobile. com or http://www.lg.com/common/index. jsp select country and language. This feature allows you to update the firmware on your phone to a newer version conveniently from the Internet without needing to visit a service centre. This feature will only be available if and when LG makes 120 a newer firmware version available for your device. As the mobile phone firmware update requires the user's full attention for the duration of the update process, please make sure you check all instructions and notes that appear at each step before proceeding. Please note that removing the USB data cable or battery during the upgrade may seriously damage your mobile phone. NOTE: LG reserves the right to make firmware updates available only for selected models at its own discretion and does not guarantee the availability of the newer version of the firmware for all handset models. LG Mobile Phone software update via Over-the-Air (OTA) This feature allows you to update your phone's software to a newer version conveniently via OTA, without connecting with a USB data cable. This feature will only be available if and when LG makes a newer firmware version available for your device. First, you can check the software version on your mobile phone: Settings > About phone > Software update > Check now for update. You can also delay the update by 1 hour, 4 hours, 8 hours or One day. In this case, the application will notify you to update when the time is up. You can also rearrange an update manually. 121 Settings NOTE: This feature is dependent on your network service provider, region and country. DivX Mobile ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified device must be registered in order to play purchased DivX Video-
on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. DivX Certified to play DivX video up to HD 720p, including premium content 122 DivX, DivX Certified and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license. 123
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2012-05-17 | 13.56 ~ 13.56 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
2 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
3 | JBP - Part 15 Class B Computing Device Peripheral | |||
4 | 5500 ~ 5700 | NII - Unlicensed National Information Infrastructure TX | ||
5 | 5745 ~ 5825 | DTS - Digital Transmission System | ||
6 | 1852.4 ~ 1907.6 | PCE - PCS Licensed Transmitter held to ear |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 4 5 6 | Effective |
2012-05-17
|
||||
1 2 3 4 5 6 | Applicant's complete, legal business name |
LG Electronics USA, Inc.
|
||||
1 2 3 4 5 6 | FCC Registration Number (FRN) |
0020917688
|
||||
1 2 3 4 5 6 | Physical Address |
1000 Sylvan Ave.
|
||||
1 2 3 4 5 6 |
Englewood Cliffs, New Jersey 07632
|
|||||
1 2 3 4 5 6 |
United States
|
|||||
app s | TCB Information | |||||
1 2 3 4 5 6 | TCB Application Email Address |
t******@pctestlab.com
|
||||
1 2 3 4 5 6 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
1 2 3 4 5 6 |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
1 2 3 4 5 6 |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|||||
app s | FCC ID | |||||
1 2 3 4 5 6 | Grantee Code |
ZNF
|
||||
1 2 3 4 5 6 | Equipment Product Code |
P880
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 4 5 6 | Name |
K****** H******
|
||||
1 2 3 4 5 6 | Title |
Director, Standards & Compliance
|
||||
1 2 3 4 5 6 | Telephone Number |
201-2********
|
||||
1 2 3 4 5 6 | Fax Number |
201-8********
|
||||
1 2 3 4 5 6 |
k******@lge.com
|
|||||
app s | Technical Contact | |||||
1 2 3 4 5 6 | Firm Name |
PCTEST Engineering Laboratory, Inc.
|
||||
1 2 3 4 5 6 | Name |
R****** O******
|
||||
1 2 3 4 5 6 | Physical Address |
6660-B Dobbin Road
|
||||
1 2 3 4 5 6 |
Columbia, Maryland 21045
|
|||||
1 2 3 4 5 6 |
United States
|
|||||
1 2 3 4 5 6 | Telephone Number |
410-2********
|
||||
1 2 3 4 5 6 | Fax Number |
410-2********
|
||||
1 2 3 4 5 6 |
t******@pctestlab.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 4 5 6 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 4 5 6 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 4 5 6 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 05/29/2012 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 4 5 6 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 4 5 6 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 2 3 4 5 6 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 3 4 5 6 | JBP - Part 15 Class B Computing Device Peripheral | |||||
1 2 3 4 5 6 | NII - Unlicensed National Information Infrastructure TX | |||||
1 2 3 4 5 6 | DTS - Digital Transmission System | |||||
1 2 3 4 5 6 | PCE - PCS Licensed Transmitter held to ear | |||||
1 2 3 4 5 6 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Cellular/PCS GSM/EDGE/WCDMA Phone with WLAN, Bluetooth and RFID | ||||
1 2 3 4 5 6 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 4 5 6 | Modular Equipment Type | Does not apply | ||||
1 2 3 4 5 6 | Purpose / Application is for | Original Equipment | ||||
1 2 3 4 5 6 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 4 5 6 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 4 5 6 | Grant Comments | This device is approved for use in the handset described in this filing. | ||||
1 2 3 4 5 6 | Power output is peak conducted. This device is authorized to operate with the specific handset described in this filing. | |||||
1 2 3 4 5 6 | Power output is conducted. This device is authorized to operate with the specific handset described in this filing, and must not operate in conjunction with any other antenna or transmitter except as documented in filings under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. End-users must be provided with operating conditions for satisfying RF exposure compliance. This device is restricted to indoor-only use for the 5150.0 - 5250.0 MHz band. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 06-96 as a Client only without Radar Detection. | |||||
1 2 3 4 5 6 | Power output is peak conducted. This device is authorized to operate with the specific handset described in this filing. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted the specific belt-clips / holsters / accessories tested for this filing, and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.15 W/kg, <0.10 W/kg, <0.10 W/kg, and 0.76 W/kg, respectively. | |||||
1 2 3 4 5 6 | Power output listed is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted the specific belt-clips / holsters / accessories tested for this filing, and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.51 W/kg, 0.74 W/kg, 0.74 W/kg, and 0.76 W/kg, respectively. This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. | |||||
1 2 3 4 5 6 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 4 5 6 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 4 5 6 | Firm Name |
HCT Co., LTD
|
||||
1 2 3 4 5 6 | Name |
S**** L******
|
||||
1 2 3 4 5 6 | Telephone Number |
82-31********
|
||||
1 2 3 4 5 6 | Fax Number |
82-31********
|
||||
1 2 3 4 5 6 |
s******@HCT.co.kr
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 13.56000000 | 13.56000000 | 0.0100000000 % | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0080000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15B | 16 CC | ||||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15E | CC | 5180 | 5240 | 0.004 | |||||||||||||||||||||||||||||||||||
4 | 2 | 15E | CC | 5260 | 5320 | 0.004 | |||||||||||||||||||||||||||||||||||
4 | 3 | 15E | CC | 5500 | 5700 | 0.004 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
5 | 1 | 15C | CC | 2412 | 2462 | 0.137 | |||||||||||||||||||||||||||||||||||
5 | 2 | 15C | CC | 5745 | 5825 | 0.051 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
6 | 1 | 22H | 824.2 | 848.8 | 1.124 | 2.5 ppm | 248KGXW | ||||||||||||||||||||||||||||||||||
6 | 2 | 22H | 824.2 | 848.8 | 0.565 | 2.5 ppm | 251KG7W | ||||||||||||||||||||||||||||||||||
6 | 3 | 22H | 826.4 | 846.6 | 0.271 | 2.5 ppm | 4M08F9W | ||||||||||||||||||||||||||||||||||
6 | 4 | 24E | 1850.2 | 1909.8 | 1.102 | 2.5 ppm | 246KGXW | ||||||||||||||||||||||||||||||||||
6 | 5 | 24E | 1850.2 | 1909.8 | 0.815 | 2.5 ppm | 249KG7W | ||||||||||||||||||||||||||||||||||
6 | 6 | 24E | 1852.4 | 1907.6 | 0.302 | 2.5 ppm | 4M08F9W |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC