|
app
s
|
Applicant Information
|
|
|
various
|
Effective |
2021-02-01
|
|
various
|
2020-09-29
|
|
various
|
2020-09-21
|
|
various
|
Applicant's complete, legal business name |
LG Electronics USA, Inc.
|
|
various
|
FCC Registration Number (FRN) |
0020917688
|
|
various
|
Physical Address |
111 Sylvan Ave North Building
|
|
various
|
111 Sylvan Ave
|
|
various
|
Englewood Cliffs, NJ
|
|
various
|
United States
|
|
|
app
s
|
TCB Information
|
|
various
|
TCB Application Email Address |
t******@pctest.com
|
|
various
|
TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
various
|
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
various
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
various
|
B4: Microwave, Millimeter Wave Band and Citizens Broadband Radio Services equipment in 47 CFR Parts 25, 30, 74, 90, 95, 96, 97, 101 (all above 3 GHz)
|
|
various
|
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
|
|
app
s
|
FCC ID
|
|
various
|
Grantee Code |
ZNF
|
|
various
|
Equipment Product Code |
F100VM
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
various
|
Name |
D**** K********
|
|
various
|
K**** H******
|
|
various
|
Title |
Director, Regulatory and Environmental Affairs
|
|
various
|
Director, Standards & Compliance
|
|
various
|
Telephone Number |
201-2********
|
|
various
|
201-4********
|
|
various
|
Fax Number |
201-8********
|
|
various
|
E-mail |
d******@lge.com
|
|
various
|
k******@lge.com
|
|
|
app
s
|
Technical Contact
|
|
various
|
Firm Name |
PCTEST Engineering Laboratory, LLC
|
|
various
|
Name |
R******** O******
|
|
various
|
Physical Address |
7185 Oakland Mills Road
|
|
various
|
Columbia, Maryland 21046
|
|
various
|
United States
|
|
various
|
Telephone Number |
410-2********
|
|
various
|
Fax Number |
410-2********
|
|
various
|
E-mail |
t******@pctest.com
|
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
| various | Yes |
| various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 03/28/2021 |
| various | 03/20/2021 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| various |
Is this application for software defined/cognitive radio authorization? | No |
| various | Equipment Class | PCE - PCS Licensed Transmitter held to ear |
| various | DSS - Part 15 Spread Spectrum Transmitter |
| various | DXX - Part 15 Low Power Communication Device Transmitter |
| various | JBP - Part 15 Class B Computing Device Peripheral |
| various | NII - Unlicensed National Information Infrastructure TX |
| various | DTS - Digital Transmission System |
| various | 5GM - Part 30 Mobile Transmitter |
| various | CBE - Citizens Band End User Devices |
| various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Portable Handset |
| various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
| various | No |
| various | Modular Equipment Type | Does not apply |
| various | Purpose / Application is for | Class II Permissive Change |
| various | Original Equipment |
| various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| various | Grant Comments | Class II Permissive Change
Output power listed is ERP for Part 22, 27, and 90R for frequencies below 1 GHz, and EIRP for Part 24 and 27 for frequencies above 1 GHz. SAR compliance for body-worn operations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure.
This device supports bandwidths of 1.4/3/5/10 MHz for LTE Bands 5/12, bandwidths of 5/10 MHz for LTE Bands 13/14/30, bandwidths of 1.4/3/5/10/15/20 MHz for LTE Bands 4/66/2, bandwidths of 5/10/15/20 MHz for LTE Band 41.
This device supports bandwidths of 5/10/15/20 MHz for NR band n66, n2 and n5. This device supports bandwidths of 20/40/50/60/80/90/100 MHz for NR band n77.
The highest reported SAR for head, body-worn accessory, product specific (wireless router), simultaneous transmission and product specific (phablet) use conditions is 1.11 W/kg, 0.82 W/kg, 1.06 W/kg, 1.59 W/kg, and 3.65 W/kg, respectively.
HAC Rating: M4 T4 - 2011
T-coil 5G sub 6 bands appraised as equivalent LTE connections.
This device also contains functions that are not operational in US Territories. This filing is only applicable for US operations.
Certification for 3GPP 5G NR band n77 operations is limited to the 3.7 GHz segment under §27.5(m). |
| various | Class II Permissive Change
Output power listed is ERP for Part 22, 27, and 90R for frequencies below 1 GHz, and EIRP for Part 24 and 27 for frequencies above 1 GHz. SAR compliance for body-worn operations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure.
This device supports bandwidths of 1.4/3/5/10 MHz for LTE Bands 5/12, bandwidths of 5/10 MHz for LTE Bands 13/14/30, bandwidths of 1.4/3/5/10/15/20 MHz for LTE Bands 4/66/2, bandwidths of 5/10/15/20 MHz for LTE Band 41.
This device supports bandwidths of 5/10/15/20 MHz for NR band n66, n2 and n5
The highest reported SAR for head, body-worn accessory, product specific (wireless router), simultaneous transmission and product specific (phablet) use conditions is 0.19 W/kg, 0.82 W/kg, 1.06 W/kg, 1.59 W/kg, and 3.65 W/kg, respectively.
HAC Rating: M4 T4 - 2011
T-coil 5G sub 6 bands appraised as equivalent LTE connections
This device also contains functions that are not operational in US Territories. This filing is only applicable for US operations. |
| various | Class II Permissive Change
Output power listed is conducted. SAR compliance for body-worn operations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure.
The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.27 W/kg, < 0.10 W/kg, 0.11 W/kg, and 1.59 W/kg, respectively. |
| various | Class II Permissive Change |
| various | Class II Permissive Change
Output power listed is conducted. SAR compliance for body-worn operations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure.
Device is a 2 x 2 MIMO configuration, enabled for 5 GHz operations as described in this filing.
This device supports 20, 40, and 80 MHz BW modes.
The highest reported SAR for head, body-worn accessory, product specific (wireless router), simultaneous transmission and product specific (phablet) use conditions is 0.35 W/kg, 0.23 W/kg, 0.22 W/kg, 1.59 W/kg, and 3.65 W/kg, respectively.
HAC Rating: M4 T4 - 2011 |
| various | Class II Permissive Change
Output power listed is peak conducted. SAR compliance for body-worn operations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure.
Device is a 2 x 2 MIMO configuration, enabled for 2.4 GHz operations as described in this filing.
The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 1.13 W/kg, 0.23 W/kg, 0.44 W/kg, and 1.59 W/kg, respectively.
HAC Rating: M4 T4 - 2011 |
| various | Class II Permissive Change
Output power listed is EIRP. This device supports bandwidths of 50 and 100 MHz for NR bands n261/n260.
RF Exposure compliance for body-worn operations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure. |
| various | Class II Permissive Change
Output power listed is EIRP. SAR compliance for body-worn operations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure.
This device supports bandwidths of 5/10/15/20 MHz for LTE Band 48.
The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.93 W/kg, 0.20 W/kg, 0.41 W/kg, and 1.59 W/kg, respectively.
HAC Rating: M4 T4 - 2011 |
| various | Output power listed is peak conducted. SAR compliance for body-worn operations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure.
Device is a 2 x 2 MIMO configuration, enabled for 2.4 GHz operations as described in this filing.
The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.83 W/kg, 0.23 W/kg, 0.44 W/kg, and 1.59 W/kg, respectively.
HAC Rating: M4 T4 - 2011 |
| various | Output power listed is ERP for Part 22, 27, and 90R for frequencies below 1 GHz, and EIRP for Part 24 and 27 for frequencies above 1 GHz. SAR compliance for body-worn operations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure.
This device supports bandwidths of 1.4/3/5/10 MHz for LTE Bands 5/12, bandwidths of 5/10 MHz for LTE Bands 13/14/30, bandwidths of 1.4/3/5/10/15/20 MHz for LTE Bands 4/66/2, bandwidths of 5/10/15/20 MHz for LTE Band 41.
This device supports bandwidths of 5/10/15/20 MHz for NR band n66, n2 and n5
The highest reported SAR for head, body-worn accessory, product specific (wireless router), simultaneous transmission and product specific (phablet) use conditions is 0.19 W/kg, 0.82 W/kg, 1.06 W/kg, 1.59 W/kg, and 3.58 W/kg, respectively.
HAC Rating: M4 T4 - 2011
T-coil 5G sub 6 bands appraised as equivalent LTE connections
This device also contains functions that are not operational in US Territories. This filing is only applicable for US operations. |
| various | Output power listed is conducted. SAR compliance for body-worn operations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure.
The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.18 W/kg, < 0.10 W/kg, 0.11 W/kg, and 1.59 W/kg, respectively. |
| various | Output power listed is conducted. SAR compliance for body-worn operations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure.
Device is a 2 x 2 MIMO configuration, enabled for 5 GHz operations as described in this filing.
This device supports 20, 40, and 80 MHz BW modes.
The highest reported SAR for head, body-worn accessory, product specific (wireless router), simultaneous transmission and product specific (phablet) use conditions is 0.35 W/kg, 0.19 W/kg, 0.19 W/kg, 1.59 W/kg, and 3.58 W/kg, respectively.
HAC Rating: M4 T4 - 2011 |
| various | Output power listed is EIRP. SAR compliance for body-worn operations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure.
This device supports bandwidths of 5/10/15/20 MHz for LTE Band 48.
The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.89 W/kg, 0.19 W/kg, 0.35 W/kg, and 1.59 W/kg, respectively.
HAC Rating: M4 T4 - 2011 |
| various | Output power listed is EIRP. This device supports bandwidths of 50 and 100 MHz for NR bands n261/n260.
RF Exposure compliance for body-worn operations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure. |
| various | Is there an equipment authorization waiver associated with this application? | No |
| various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
various
|
Firm Name |
PCTEST Engineering Laboratory, LLC
|
|
various
|
HCT Co., Ltd.
|
|
various
|
Name |
R**** O******
|
|
various
|
L******** Y******
|
|
various
|
Telephone Number |
410-2********
|
|
various
|
82-31********
|
|
various
|
Fax Number |
410 2********
|
|
various
|
82-31********
|
|
various
|
E-mail |
r******@pctestlab.com
|
|
various
|
y******@hct.co.kr
|
|