|
app
s
|
Applicant Information
|
|
|
1 2 3 4 5 6
|
Effective |
2019-04-30
|
|
1 2 3 4 5 6
|
Applicant's complete, legal business name |
LG Electronics USA, Inc.
|
|
1 2 3 4 5 6
|
FCC Registration Number (FRN) |
0020917688
|
|
1 2 3 4 5 6
|
Physical Address |
1000 Sylvan Ave.
|
|
1 2 3 4 5 6
|
Englewood Cliffs, New Jersey 07632
|
|
1 2 3 4 5 6
|
United States
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4 5 6
|
TCB Application Email Address |
t******@pctest.com
|
|
1 2 3 4 5 6
|
TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
1 2 3 4 5 6
|
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
1 2 3 4 5 6
|
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4 5 6
|
Grantee Code |
ZNF
|
|
1 2 3 4 5 6
|
Equipment Product Code |
X525EAW
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4 5 6
|
Name |
K**** H****
|
|
1 2 3 4 5 6
|
Title |
Director, Standards & Compliance
|
|
1 2 3 4 5 6
|
Telephone Number |
201-2********
|
|
1 2 3 4 5 6
|
Fax Number |
201-8********
|
|
1 2 3 4 5 6
|
E-mail |
k******@lge.com
|
|
|
app
s
|
Technical Contact
|
|
1 2 3 4 5 6
|
Firm Name |
PCTEST Engineering Laboratory, Inc.
|
|
1 2 3 4 5 6
|
Name |
R******** O******
|
|
1 2 3 4 5 6
|
Physical Address |
7185 Oakland Mills Road
|
|
1 2 3 4 5 6
|
Columbia, Maryland 21046
|
|
1 2 3 4 5 6
|
United States
|
|
1 2 3 4 5 6
|
Telephone Number |
410-2********
|
|
1 2 3 4 5 6
|
Fax Number |
410-2********
|
|
1 2 3 4 5 6
|
E-mail |
t******@pctest.com
|
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 5 6 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 5 6 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 5 6 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 10/27/2019 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 5 6 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 5 6 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter |
| 1 2 3 4 5 6 | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 4 5 6 | PCE - PCS Licensed Transmitter held to ear |
| 1 2 3 4 5 6 | DTS - Digital Transmission System |
| 1 2 3 4 5 6 | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 4 5 6 | JBP - Part 15 Class B Computing Device Peripheral |
| 1 2 3 4 5 6 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Portable Handset |
| 1 2 3 4 5 6 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 4 5 6 | Modular Equipment Type | Does not apply |
| 1 2 3 4 5 6 | Purpose / Application is for | Original Equipment |
| 1 2 3 4 5 6 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 4 5 6 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 5 6 | Grant Comments | Power output is conducted. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
This device supports 20, 40, and 80 MHz BW modes.
The highest reported SAR for head, body-worn accessory, product specific (wireless router), simultaneous transmission, and product specific (phablet) use conditions is 0.54 W/kg, 0.47 W/kg, 0.47 W/kg, 1.31 W/kg, and 1.03 W/kg respectively. |
| 1 2 3 4 5 6 | Power output listed is ERP for frequencies below 1 GHz and EIRP for frequencies above 1 GHz. SAR compliance for body-worn operations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.38 W/kg, 0.82 W/kg, 0.82 W/kg, and 1.31 W/kg, respectively.
This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. |
| 1 2 3 4 5 6 | Power output is peak conducted. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.56 W/kg, 0.16 W/kg, 0.16 W/kg, and 1.31 W/kg, respectively. |
| 1 2 3 4 5 6 | Power output is conducted. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.13 W/kg, <0.1W/kg, <0.1 W/kg, and 1.31 W/kg, respectively. |
| 1 2 3 4 5 6 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 5 6 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4 5 6
|
Firm Name |
DT&C Co., Ltd.
|
|
1 2 3 4 5 6
|
Name |
L******** S******
|
|
1 2 3 4 5 6
|
Telephone Number |
82-31********
|
|
1 2 3 4 5 6
|
Fax Number |
82-31********
|
|
1 2 3 4 5 6
|
E-mail |
g******@dtnc.net
|
|