all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
User Manual | Users Manual | 5.62 MiB | October 04 2013 | |||
1 2 3 | Cover Letter(s) | October 04 2013 | ||||||
1 2 3 | Cover Letter(s) | October 04 2013 | ||||||
1 2 3 | ID Label/Location Info | October 04 2013 | ||||||
1 2 3 | External Photos | October 04 2013 | ||||||
1 2 3 | Internal Photos | October 04 2013 | ||||||
1 2 3 | Test Setup Photos | October 04 2013 | ||||||
1 2 3 | Test Setup Photos | October 04 2013 | ||||||
1 2 3 | RF Exposure Info | October 04 2013 | ||||||
1 2 3 | RF Exposure Info | October 04 2013 | ||||||
1 2 3 | RF Exposure Info | October 04 2013 | ||||||
1 2 3 | RF Exposure Info | October 04 2013 | ||||||
1 2 3 | Test Report | October 04 2013 | ||||||
1 2 3 | Test Setup Photos | October 04 2013 | ||||||
1 2 3 | Test Setup Photos | October 04 2013 | ||||||
1 2 3 | Test Setup Photos | October 04 2013 | ||||||
1 2 3 | Test Report | October 04 2013 | ||||||
1 2 3 | Test Report | October 04 2013 |
1 2 3 | User Manual | Users Manual | 5.62 MiB | October 04 2013 |
ENGLISH www.lg.com User Guide CR820 MFL67846801 (1.0) ENGLISH CR820 User Guide Contents Supplied Accessories .....................................3 Precautions....................................................4 Before Using this Terminal .............................8 Setting Up ....................................................34 Connecting to the Internet ...........................45 Settings .......................................................46 Overseas Use ...............................................80 Troubleshooting ...........................................82 Guidelines for safe and efficient use ............96 2 Supplied Accessories CR820 Terminal
(including the warranty) CR820 INSTRUCTION MANUAL Back Cover Battery Pack Data cable Travel Adapter IMEI Label
*351876050000001*
351876050000001 SSID: CR820_EF31C1E0 Security Key: B83A3F60 3 Precautions Technical data Ambient temperatures Max: +35C (discharging), +45C (charging) Min: 0C 4 Battery information and care You do not need to completely discharge the battery before recharging. Unlike other battery systems, there is no memory effect that could compromise the battery's performance. Use only LG batteries and chargers. LG chargers are designed to maximise the battery life. Do not disassemble or short-circuit the battery. Keep the metal contacts of the battery clean. Replace the battery when it no longer provides acceptable performance. The battery pack may be recharged hundreds of times before it needs replacing. Recharge the battery if it has not been used for a long time to maximise usability. Do not expose the battery charger to direct sunlight or use it in high humidity, such as in the bathroom. Do not leave the battery in hot or cold places, as this may deteriorate battery performance. There is risk of explosion if the battery is replaced with an incorrect type. Dispose of used batteries according to the manufacturer's instructions. Please recycle when possible. Do not dispose as household waste. If you need to replace the battery, take it to the nearest authorised LG Electronics service point or dealer for assistance. Always unplug the charger from the wall socket after the phone is fully charged to save unnecessary power consumption of the charger. 5 Precautions Actual battery life will depend on network configuration, product settings, usage patterns, battery and environmental conditions. Make sure that no sharp-edged items such as animals teeth or nails, come into contact with the battery. This could cause a fire. Adapter Charge the battery pack in a place with an ambient temperature between 0C and 45C. Do not charge the battery pack in the following areas.
- In areas of excessive humidity, dust or vibration
- Near land-line phones, TVs or radios It is normal for the adapters to become warm while using or charging the terminal. You can continue to use it. Use the DC adapter only when the car engine is running.
- Otherwise, the car battery may be exhausted. Do not give a strong impact to the adapter. Also, do not deform the charging terminals. Malfunction may result. 6 Micro USIM Do not put excessive force on the Micro USIM when inserting or removing it into this terminal. Do not insert and use the Micro USIM with another IC card reader/writer. Please note that you are wholly liable for any damage or malfunction as a result of such action. Always keep the IC portion of the Micro USIM clean. Be sure to keep a separate note of the information registered to this terminal. Claro assumes no responsibility for the loss of any of your data. Visit service center to return the expended Micro USIM for the environmental purpose. Do not scratch, touch carelessly or short circuit the IC portion. Data loss or malfunction may result. Do not drop or give shock to the Micro Clean the Micro USIM with a soft, dry cloth (Lens cleaning cloth). USIM. Malfunction may result. 7 Before Using this Terminal Names of Parts and Functions Display Power button: Hold down the button for over 2 seconds to turn on or off. 8 Wi-Fi button: Hold down the button for over 2 seconds to set/cancel power saving mode. During power saving mode, wireless LAN function and network communication function are off. When the display has gone off, press the Power button to lighten the display, then press the Wi-Fi button. WPS button: Hold down the button for over 2 seconds to connect the other wireless LAN device to the wireless LAN of this terminal using WPS function (Unavailable when WEP is set). When the display has gone off, press the Power button to lighten the display, then press the WPS button. Back cover: Removing the back cover, the Micro USIM slot guide is under the battery pack. External connector: This connects to AC Adapter or microUSB Connection Cable. NOTE: When this terminal is put on the metal objects such as a steel desk or table, the performance of the antenna is affected and the communication speed may become lower. 9 Before Using this Terminal Display Overview The signs (icons) that appear on the display indicate these states (press the power button to display the icons):
10 Levels of radio wave reception Strong Weak Types of networks available during connection LTE 3G (HSDPA/HSUPA, W-CDMA) Internet connection is unavailable when an icon shows not connected appears on the display of this terminal. Activating global roaming States of network connection Connected Not connected Pending state of connection WPS function available Wi-Fi auto off function set Battery level High Low Blinking: The battery is almost exhausted. Charge the battery. Wireless LAN function ON It disappears when wireless LAN function is OFF. Number of connecting terminals to wireless LAN Network data usage The amount of data communication is displayed. Data communication in overseas is not be added to this amount. Also, the amount of data communication within the international roaming area is not displayed. 11 Before Using this Terminal Indicators The display shows the charging state of battery pack, wireless LAN states, name of the connecting network, etc.
(Examples are shown below.) Battery is exhausted Activating Wi-Fi Charging Activating WPS function Disconnecting Wi-Fi 12 Using Micro USIM A Micro USIM is an IC card that stores personal information such as your phone number. Without the Micro USIM installed in this terminal, you cannot use data communication. For details on handling the Micro USIM, refer to the Micro USIM manual. Only the Micro USIM can be used in this terminal. Inserting the Micro USIM When inserting the Micro USIM, hold this terminal with both hands. Turn the power off and remove the battery pack before attaching the Micro USIM. 1 With the IC chip side down, insert a Micro USIM under the Micro USIM slot guide in the direction of arrow. 13 Before Using this Terminal Notch IC
(gold) Micro USIM slot guide Notch Turn the power off and remove the battery pack before removing the Micro USIM. 1 Slide the Micro USIM in the direction of arrow to remove. Removing the Micro USIM When removing the Micro USIM, hold this terminal with both hands. 14 Security Codes A Micro USIM has PIN1 (Personal Identification Number) code. The PIN1 code is a 4 to 8-digit security code to be entered every time this terminal is turned on for user verification to prevent any unauthorized use by others. NOTE Do not lose the removed Micro USIM. Check both sides of the Micro USIM. IC Be careful not to touch or scratch the Micro USIM IC. Inserting a Micro USIM in the reverse direction may cause malfunction. Inserting or removing the Micro USIM with an excessive force 15 If you improperly enter the PIN1 code for 3 times in a row, further entry is locked automatically (PIN1 Lock), so be sure to keep a separate note of the numbers you set.
- Changing the Security Code (Modify PIN code) Before Using this Terminal If your Micro USIM is set to require a PIN1 code, data communication cannot be performed until the PIN1 code is entered. Use the Micro USIM before verifying the PIN1 code, or set the Micro USIM not to verify the PIN1 code in advance. Changing PIN1 Code You can change the PIN1 code to any number. To prevent any unauthorized use by third parties, change it to your original number. 16 Unblocking PIN Code The unblocking PIN code is the number in 8 digits used to unblock the PIN1 code. Details are written in the application of the contract (a duplicate copy) during the subscription. You cannot change the unblocking PIN code. If you improperly enter the unblocking PIN code for 10 times in a row, the Micro USIM locks automatically. Caution Do not set PIN1 code to numbers that can be easily guessed, such as birth date, part of your phone number, numbers from address or room number, 1111, 1234, etc. Also, make a note of your PIN1 code and keep it well. Keep your PIN1 code away from being known by other people. Claro assumes no responsibility for the loss of any of your data results from abuse of PIN1 code. 17 Before Using this Terminal Logging-in to MOBILE ROUTER CR820 PIN1 code Verification screen appears Enter PIN1 Code Incorrect entry 3 times in a row Enter Unblocking PIN Code OK Incorrect entry 10 times in a row Available to set a new PIN1 code Contact a service center 18 Attaching and Detaching the Battery Pack Use the Battery Pack for this terminal. NOTE: Always turn off this terminal before removing the battery pack. If the battery pack is removed while the power is on, this terminal may not work correctly. Attaching the Battery Pack When attaching the battery pack, hold this terminal with both hands. 1 Insert a fingernail into the groove at the bottom of this terminal, and pull up in the direction of arrow in the direction of arrow the back cover. to remove while pressing Do not remove the back cover as described below. Do not remove the back cover by inserting a fingernail into a part other than the groove. Back cover Groove 19 Before Using this Terminal Do not slide the back cover. 1 Align the metal contacts of both the battery pack and this terminal, attach the battery pack in the direction
. then push it down in the direction Fit the depressions of the battery pack into the projections of this terminal.
, and Projections 20 2 Check the direction of the back cover and attach it to the terminal. Press each tab to close it firmly. Detaching the Battery Pack When attaching the battery pack, hold this terminal with both hands. 1 Insert a fingernail into the groove at the bottom of this terminal, and pull up in the direction of arrow in the direction of arrow the back cover. to remove while pressing 21 Before Using this Terminal 2 Put your fingertip at the concave part of this terminal, press in the direction
, and then
.
, lift it in the direction remove it in the direction Projections Back cover Groove 22 3 Check the direction of the back cover and attach it to the terminal. Press each tab to close it firmly. Charging Battery pack life The battery pack is a consumable item. The usable time decreases every time the battery pack is recharged. When the usable time after each recharging shortens by approximately half compared to a new battery pack, it is recommended that the battery pack be replaced with a new one as soon as possible. The battery pack may swell as the battery life is near its end depending on the battery pack condition, but it is not a malfunction. 23 Before Using this Terminal If you make communication while the battery pack is being charged, the battery life may be shortened. Charging To use an AC adapter overseas, the compatible conversion plug adapter is required. Do not charge the battery pack with a transformer designed for overseas trips. 24 To charge the battery pack with the AC or DC adapter, make sure that the battery pack is inserted into this terminal. Plug or unplug the connector slowly and securely avoiding excessive force. If you start charging the fully drained battery pack, this terminal may not be turned on for a while. If you make communication while charging, the inside of this terminal may become hot and charging may stop. In this case, end the functions in use and wait until this terminal becomes cool down, and then try charging again. Depending on the usage condition, charging may stop before the battery level becomes 100%. In this case, remove the battery pack and attach it again to continue charging. Do not remove the battery pack while charging. If the battery pack is removed, the power does not correctly turn on or the battery is not correctly charged. In that case, remove the battery pack and all cables from this terminal, and reconnect them. Approximate battery pack usage &
charging time The usage time may vary depending on the operating environment and the battery pack deterioration. Continuous communication time LTE 3G (HSDPA/
HSUPA, W-CDMA) Approx. 4 hours Approx. 5 hours 25 Before Using this Terminal Continuous stand-by time LTE 3G (HSDPA/
HSUPA, W-CDMA) AC Adapter USB Battery pack charging time Approx. 160 hours Approx. 320 hours Approx. 200 minutes Approx. 270 minutes 26 Continuous communication time is the approximate usage time when you can normally send and receive radio waves. Continuous stand-by time is approximate usage time when moving with normal radio wave reception level. Communication time or operating time may be reduced by half depending on the battery level, set functions, operating environment such as ambient temperature, or radio wave reception level (poor or weak radio wave reception level). Depending on network conditions in the country you stay, usage time may become shorter than the described values. The estimated charging time is the duration of time to charge a fully drained battery pack with this terminal turned off. The charging time becomes longer with this terminal turned on. Turning Power On/Off Turning Power On 1 When this terminal is turned off, hold down the power button for over 2 seconds. 27 Before Using this Terminal Turning Power Off 1 When this terminal is turned on, hold down the power button for over 2 seconds. Available Communications Basic Usage You can perform data communication at a speed of up to 100Mbps* for receiving data and up to 50Mbps* for sending data by connecting up to 10 Wi-Fi devices compatible with wireless LAN function. 28
*
Communication speed is theoretical values when sending and receiving data which does not show the actual ones. The actual communication speed depends on communication environment and network congestion. Wireless LAN Network PC, game console, etc. CR820 Wireless LAN You can connect up to 10 Wi-Fi devices compatible with wireless LAN (IEEE 802.11 b/g/n) simultaneously. This terminal supports WPS function. When your wireless LAN terminal supports WPS function, you can set up the wireless LAN connection easily. This terminal cannot connect to a wireless LAN access point. NOTE:
Note that high communication fees are charged when performing communications with large amount of data such as browsing websites with many graphics or downloading data. Data communication may take more time or become difficult to connect depending on the network congestion. For customers who use a large amount of data communication, it may have difficulties in sending and receiving data on time. Also, data communication may get disconnected when a large amount 29 Before Using this Terminal of data communication occurs at a time or within a certain period of time, when being connected for a long time or when connecting several times in a row within a certain period of time. This terminal does not support Remote Wakeup. This terminal does not support FAX communication. Usage Notes User authentication to access networks The ID and password will be provided by the network administrator of your ISP or the access point. For details, contact your provider or access point network administrator. Internet connection is unavailable when Not connected icon appears on the display of this terminal. 30 Requirements for communication The following conditions must be met to perform communications using this terminal. However, a connection may not be established if traffic is heavy at the base station or if radio waves are weak.
- This terminal must be in service area.
- The access point corresponds to the data communication. Attaching and Detaching this Terminal to/from a PC Attach this terminal to a PC to charge this terminal with microUSB Connection Cable. Attaching to a PC USB connector microUSB connector
(with the inscribed B side up) 31 Before Using this Terminal 1 Turn on a PC. 2 With the inscribed B side up, insert the microUSB connector of the microUSB Connection Cable straight to the external connector of this terminal. 3 Insert the other connector of microUSB Connection Cable to the USB port of the PC. For the first time connection after purchasing, the CR820 driver setup screen appears by zero-install function only for Windows version. Follow the onscreen instructions to install the driver.*
32 The driver is necessary only when updating software. After installation, the shortcut of Connection Manager is created on the desktop screen. Depending on the OS settings, Auto start screen may appear. When the screen appears, select LGERouter_ ModemDriver and choose Setup Language either "English" or "Polish" and click "Next". Do not cancel the driver installation halfway or remove this terminal. Without the driver, Software update cannot be performed.
*
Detaching from a PC Remove microUSB Connection Cable. 33 Setting Up Setting Up Before using this terminal, make settings to connect your wireless LAN terminal to this terminal's wireless LAN. You can also change the wireless LAN and other settings according to your environment. Operating Environments Use this terminal under the following operating environments. 34 Item Requirement PC Main Unit OS*1 PC/AT compatible computer and Mac More than 800 600 dots for display resolution and High Color 16 bits are recommended Windows XP SP3 Windows Vista SP2 Windows 7 SP1 Mac OS X 10.6.8/10.7.3*3 Item Requirement Windows XP: 256MB or more Windows Vista: 512MB or more Windows 7: 1GB or more (32bit), 2GB or more (64bit) Mac OS X 10.6.8: 1GB or more Mac OS X 10.7.3: 2GB or more 100MB or more free disk space Required Memory*2 Hard Disk Space*2
*1 Claro does not guarantee the operation under the environment of OS which is upgraded, added or modified.
*2
*3 Required memory or available hard disk space may vary depending on the system environment of a PC. This is only for Mac with Intel CPU. NOTE: The software may not work depending on your operating system environment and type of device. Claro does not guarantee any inquiry or operation other than the operation environment described in this manual. 35 Setting Up Flow of Setup Setup is made in the following procedure. Connect your wireless LAN terminal to this terminal's wireless LAN Setting the Internet connection For Claro, this setting is not necessary. For setting procedures, see Registering the Access Point Settings (Profile). NOTE:
To change this terminal's setting, connect this terminal to a PC, change the setting, and then connect the other wireless LAN terminal.
* You can change this terminal's setting with the console other than a PC, which is equipped with a browser. However, some menus and some browser types may be unavailable. 36 Connecting to a Wireless LAN Terminal Setting procedures vary depending on the wireless LAN you use. The procedures for the following terminals are described here. Windows PC (For Windows 7/Windows Vista) Windows PC (For Windows XP) Mac iPad iPod touch Nintendo DS PSP WPS compatible wireless LAN terminal NOTE:
Make one of these settings when you connect this terminal to each terminal for the first time. Once you have set, the terminal connects to it automatically only by turning power on. To connect to a wireless LAN without WPS function, entering SSID and Security key (WPA/WPA2 shared key) set to this terminal is required. Confirm it in advance. This terminal can connect up to 10 wireless LAN terminals simultaneously. 37 Setting Up For Windows PC and Mac, you need to login with the user account which has administrative right beforehand. SSID and Security key (WPA/WPA2 shared key) printed area Check SSID and Security key (WPA/WPA2 shared key) on the included Wireless LAN Initialization Sticker. Also, SSID and Security key (WPA/WPA2 shared key) is printed on the sticker inside of this terminal. Remove the battery pack to see it. 38 SECURITY KEY Connecting to Windows PC The setting procedure when security mode of this terminal is set to WPA2-PSK/AES is described here. For Windows 7/ Windows Vista 1 Hold down the power button of this terminal for over 2 seconds. This terminal turns on, and the wireless LAN function turns on. 2 Turn on the wireless LAN function of a PC. 3
(Start) Click Control panel Network and
"Network and Internet sharing center). Network and sharing center window appears. 4 Click Connect to a network. 5 Click the item which shows SSID
(Default: CR820_XXXXXXXX) set to this terminal, and click Connect. 6 In Security key or pass phrase, enter Security key (WPA/WPA2 shared key) set to this terminal, and click OK. Click Connect for Windows Vista. 7 Select Save this network and Start this connection automatically, and then click Close. For Windows 7, skip procedure 7. 39 Setting Up For Windows XP 1 Hold down the power button of this terminal for over 2 seconds. This terminal turns on, and the wireless LAN function turns on. 2 Turn on the wireless LAN function of a PC. 3 Click Start Control panel Network and Internet Network connection. 4 Double-click "Wireless network connection". Wireless network connection window appears. 5 Click the item which shows SSID
(Default: CR820_XXXXXXXX) set to this terminal, and click Connect". 6 In Network key and Confirmation of Network key, enter Security key (WPA/
WPA2 shared key) set to this terminal, and click Connect. 40 Connecting to WPS Compatible Wireless LAN Terminal NOTE:
Setting procedures vary depending on the wireless LAN terminal. Refer to the instruction manual of your wireless LAN terminal. When the PIN code of WPS function is specified to your wireless LAN terminal, you need to select WPS PIN in WPS type, and set the specified PIN code to WPS PIN in advance. When the security mode of this terminal is set to WEP, WPS function is not available. When SSID Broadcast is Disable, the WPS function is not activated. When WPS type is Push button 1 Hold down the power button of this terminal for over 2 seconds. This terminal turns on, and the wireless LAN function turns on. 41 Setting Up 2 Set the wireless LAN function of the target terminal to ON, and make the WPS function setting as required. The operation varies depending on the terminal. 3 Perform the connecting operation of the WPS function on the target terminal. The operation varies depending on the terminal. 4 Press the WPS button of this terminal for over 2 seconds. 42 5 Follow the onscreen instructions of the target terminal to on. The operation varies depending on the terminal. When WPS type is WPS PIN 1 Hold down the power button of this terminal for over 2 seconds. This terminal turns on, and the wireless LAN function turns on. 2 Start the web browser on PC which is connected with the wireless LAN, and login to the setting page (MOBILE ROUTER CR820). 3 Set the wireless LAN function of the target terminal to ON, and select WPSPIN access. Enter the 8-digit WPS PIN on the wireless LAN terminal. 4 Enter the 8-digit WPS PIN displayed on the wireless LAN terminal in WPS PIN field of WPS setting page on MOBILE ROUTER CR820 setting page, and click
[Apply]. When WPS OK is displayed, you could access to WPS. Making Other Settings You can change the settings of this terminal according to your environment by starting Web browser on the PC connected via wireless LAN and displaying the setting page of this terminal.
* You can change this terminal's setting with the console other than a PC, which is equipped with a browser. However, some menus and some browser types may be unavailable. For details, see Settings. 43 Setting Up Setting Wireless LAN You can change the settings of wireless LAN and the basic settings of LAN. Setting Network You can change the settings of access point and Micro USIM. Setting Security Functions You can set the firewall function of this terminal. Managing the system You can use management functions of this terminal, such as saving the settings, confirmation of firmware version, etc. 44 Connecting to the Internet Internet Connection To connect to the Internet with this terminal, the subscription to the Internet service provider compatible with the service and data communication is required. Register the settings for connection with the Internet service provider to Profile of this terminal. For details on the setting method, refer to Registering the Access Point Settings
(Profile). Up to 10 profiles can be registered. When connecting this terminal to Claro, this setting is not necessary. Connecting to the Internet You can use the Internet by turning on this terminal to connect automatically to the access point set to the Profile. Check if your wireless LAN terminal is connected to the Internet. For selection method of access point when multiple Profiles are registered, refer to Searching network. 45 Settings Logging-in to MOBILE ROUTER CR820 You can make various settings by starting Web browser on a PC connected via wireless LAN and displaying the setting page (MOBILE ROUTER CR820). NOTE:
You can change this terminal's setting with the console other than a PC, which is equipped with a browser. However, some menus and some browser types may be unavailable. 46 The setting page of this terminal supports the following Web browsers. Windows: Microsoft Internet Explorer 6, 7, 8, 9, Firefox, Google Chrome, Opera Mac OS X: Safari 5.0
* Depending on the browser, some screens and items may not be displayed.
* Enable cookies on your browser (save and accept). 1 Hold down the power button of this terminal for over 2 seconds. This terminal turns on, and the wireless LAN function turns on. 2 Turn on a PC and the wireless LAN function. This terminal is connected to the PC via wireless LAN. When connecting for the first time, wireless LAN setup is required. For setting up, refer to Connecting to a Wireless LAN Terminal. 3 Double click the shortcut of MOBILE ROUTER CR820 on the desktop screen, or start a Web browser and enter http://192.168.2.1/ in the address entry field, then press Enter key. Login screen appears. 192.168.2.1 is the default setting of the private IP address of this terminal. When the setting has been changed, enter the private IP address you set. 4 Enter Admin in [Username] field, enter the log-in password (default: 1234) in
[Password] field, and then click [Login]. In [Language] field, you can select a language on the setting page. 47 Click [OK] when a message of PIN1 unlock appears. Status screen appears. If there is latest version, a message from web page is displayed on Status screen. For updating procedure, see Updating Software. Settings When PIN1 code is set, PIN1 code verification screen appears. 5 When PIN1 code verification screen appears, enter PIN1 code in [PIN1 code]
field, and then click [Apply]. For details on PIN1 code, see Security Codes. 48 NOTE: For your security, it is recommended to change the default setting of log-in password. For details, see Changing Login Password (Modify password). The Setting Page Screen Top menu Click a menu item to switch the setting page. You can select the following items. STATUS WLAN NETWORK SECURITY SYSTEM The submenu appears for some items, and you can switch the setting screen.
[Logout]
Click to log out from the setting page. 49 Confirming Connection/Setting Conditions of this Terminal 1 Click [STATUS] in the top menu. Status screen appears. Click [Refresh] to refresh the information. Settings Setting screen The setting items for the function selected from the menu items appear. Click to edit the setting. Click to refresh the information on the Status screen. 50 Network selection*: The connecting band is displayed. Network name*: The connecting network name is displayed. Signal strength* : The current level of radio wave reception is displayed. Wi-Fi status: The status of the wireless LAN function is displayed. Connected clients: The number of currently connected terminals via wireless LAN is displayed. Wi-Fi auto off: The setting status of the Wi-Fi auto off function is displayed. WPS: The operating status of the WPS function is displayed. USIM card: Phone number of Micro USIM is displayed. Network data usage*: The current amount of data communication is displayed. Data communication in overseas is not be added to this amount.
* When the Micro USIM is not inserted, the items do not appear. On the Status screen, USIM card has not been inserted properly or is invalid appears. 51 Settings Setting Wireless LAN NOTE: When using wireless LAN overseas, check the available frequency band, laws, regulations or other conditions of the country beforehand. Setting Basic Functions of Wireless LAN 1 In the top menu, click [WLAN]. 2 In the submenu, click [Basic Setting]. 3 On the setting screen, set the required items. 52 SSID (Default: CR820_XXXXXXXX) Set the network name (SSID) of the wireless LAN. You can enter up to 32 letters with one-byte alphanumeric, -(hyphen) and _(under bar). Country (Default: CHILE) Select a country name where this terminal is used. (This field specifies the range of Wlan channel.) Channel (Default: Auto) Select a channel of wireless LAN. IEEE802.11 Mode: (Default: 802.11b/g/n) Select an operation mode of wireless LAN.
- 802.11b/g/n
- 802.11b/g
- Only 802.11b
- Only 802.11g
- Only 802.11n
(When the security mode is set to WEP, or when the mode is set to WPA-PSK or WPA2-PSK and TKIP is selected, Only 802.11n or 802.11b/g/n cannot be selected.) SSID Broadcast (Default: Enable) Select whether to display SSID on the wireless LAN terminal.
- Enable: SSID is displayed
- Disable: SSID is not displayed Privacy separator (Default: Disable) Select whether to prohibit communication between wireless LAN terminals.
- Enable: Communication is prohibited
- Disable: Communication is not prohibited 4 Click [Apply] to save the setting. 53 Settings Setting Wi-Fi auto off Function 1 In the top menu, click [WLAN]. 2 In the submenu, click [Wi-Fi auto off]. 3 On the setting screen, set the required items. 54 Wi-Fi auto off (Default: Enable) Select whether to set the wireless LAN function to off automatically and power saving mode when no client connection is made in a certain period.
- Enable: The wireless LAN function is set to off
- Disable: The wireless LAN function is not set to off When Enable is set Wi-Fi off time (min) (Default: 10) When Enable is set to Wi-Fi auto off, select the time (minutes) to set automatically to off.
- 10
- 30
- 60 4 Click [Apply] to save the setting. Setting Security Mode of Wireless LAN 1 In the top menu, click [WLAN]. 2 In the submenu, click [Security]. 3 On the setting screen, set the required items. Security mode (Default: WPA/WPA2-PSK mixed) Select the security mode of wireless LAN.
- Open
- WEP
- WPA-PSK 55 Settings
- WPA2-PSK
- WPA/WPA2-PSK mixed Depending on the Security mode setting, the following setting items are different. When Open is set Limitation of clients (Default: 1) The number of terminals which can be connected is displayed (it cannot be changed.). When WEP is set WEP key1-4 (Default: XXXXX) Enter WEP key. You can enter 5, 10, 13 or 26 letters with one-byte alphanumeric. 56 For 5-letter or 13-letter key, use a key with one-byte alphanumeric (0-9, a-z, A-Z). For 10-letter or 26-letter key, use hexadecimal numbers (0-9, A-F). Only the specified number of WEP key in Current WEP key is judged for letter type to enter. Current WEP key (Default: 1) Select the number of WEP key to use. For Wireless LAN terminal which cannot specify the index of WEP key (iPod touch and IPad, etc.), WEP key 2-4 cannot be used. Limitation of clients (Default: 10) The number of terminals which can be connected is displayed. When WPA-PSK is set Encryption type (Default: TKIP) Select the encryption type.
- AES
- TKIP When WPA2-PSK is set Encryption type (Default: AES) Select an encryption type.
- AES
- TKIP WPA shared key (Default: XXXXXXXX) Enter Security key of WPA. You can enter 8-64 letters with one-byte alphanumeric. For 64-letter key, use hexadecimal numbers
(0-9, A-F). Limitation of clients (Default: 10) The number of terminals which can be connected is displayed. WPA2 shared key (Default: XXXXXXXX) Enter Security key of WPA2. You can enter 8-64 letters with one-byte alphanumeric. For 64-letter key, use hexadecimal numbers
(0-9, A-F). Limitation of clients (Default: 10) The number of terminals which can be connected is displayed. 57 1 In the top menu, click [WLAN]. 2 In the submenu, click [WPS]. 3 On the setting screen, set the required items. Settings When WPA/WPA2-PSK mixed is set WPA/
WPA2 shared key (Default: P40) Enter Security key of WPA/WPA2. You can enter 8-64 letters with one-byte alphanumeric. For 64-letter key, use hexadecimal numbers (0-9, A-F). Limitation of clients (Default: 10) The number of terminals which can be connected is displayed. 4 Click [Apply] to save the setting. Setting WPS Function NOTE: WPS Function cannot be used when WEP is set for Security. 58 WPS (Default: Enable) Select whether to use WPS function.
- Enable: WPS function is used
- Disable: WPS function is not used When Enable is set WPS type (Default: Push button) Select a type of WPS function.
- Enable only: When connect with WPS type after pressing the WPS button of this terminal (WPS function is not activated if you press [Apply] button.)
- Push button: When you use the WPS button or connect with WPS type after clicking
[Apply] button
- WPS PIN: When you connect by entering the PIN code (8-digit number) for WPS WPS PIN Enter the specified PIN code. 4 Click [Apply] to save the selected WPS setting. The saved WPS setting is valid even after restarting of this terminal. Setting MAC Address Filter 1 In the top menu, click [WLAN]. 2 In the submenu, click [MAC address filter]. 3 On the setting screen, set the required items. 59 Settings Restrict mode (Default: Disable) Select an operation mode of MAC address filter function.
- Disable: MAC address filter is not used
- Allow: Allows the connection only to this terminal with the specified MAC address 60
- Deny: Prohibits the connection to this terminal with the specified MAC address When Allow or Deny is set Mac addresses entry field appears. Enter the specified terminal's MAC address. You can specify up to 10 MAC addresses. 4 Click [Apply] to save the setting. Setting DHCP Function 1 In the top menu, click [WLAN]. 2 In the submenu, click [DHCP]. 3 On the setting screen, set the required items.
- Enable: DHCP function is used
- Disable: DHCP function is not used When Enable is set Start IP address (Default: 192.168.2.2) Set the minimum IP address assigned to this terminal. End IP address (Default: 192.168.2.99) Set the maximum IP address assigned to this terminal. Primary DNS (Default: 192.168.2.1) Set IP address of primary DNS server. Secondary DNS (Default: 0.0.0.0) Set IP address of secondary DNS server. 4 Click [Apply] to save the setting. 61 IP address (Default: 192.168.2.1) Set private IP address of this terminal. Subnet mask (Default: 255.255.255.0) Set subnet mask of LAN. DHCP server (Default: Enable) Select whether to use DHCP function. 1 In the top menu, click [WLAN]. 2 In the submenu, click [UPnP]. 3 On the setting screen, set the required items. Settings Confirming Connected Clients 1 In the top menu, click [WLAN]. 2 In the submenu, click [Connected clients]. 3 The connected terminal's information appears. Click [Refresh] to refresh the information. 4 To disconnect, click Disconnect field. in the Setting UPnP Function To use the application using the UPnP function, set to Enable the UPnP function. 62 UPnP (Default: Disable) Select whether to use the UPnP function.
- Enable: UPnP function is used
- Disable: UPnP function is not used 4 Click [Apply] to save the setting. Setting Network Setting Network mode Function 1 In the top menu, click [NETWORK]. 2 In the submenu, click [Network mode]. 3 On the setting screen, set the required items. Band (Default: Auto)
- Auto: Connect the LTE network or the 3G network automatically.
- LTE only: Connect the LTE network only.
- 3G only: Connect the 3G network only. 63 Settings 4 Click [Apply] to save the setting. Selecting a network You can specify the network. 1 In the top menu, click [NETWORK]. 2 In the submenu, click [Searching network]. 3 On the setting screen, set the required items. 64 Mode (Default: Auto) Select whether to specify the network.
- Auto: The network to connect is automatically selected.
- Manual: Select when you specify the network. Click [Apply] to search the available network and register it to [Operators]. 1 In the top menu, click [NETWORK]. 2 In the submenu, click [Profile]. 3 To register a new access point, click
[Add New]. When Manual is set Operators (Default: none) Select a network to connect. 4 Click [Apply] to save the setting. Registering the Access Point Settings Register, edit or delete the access point settings. You can register up to 10 access points. By default, the setting for Claro is registered and you cannot delete it. When using Claro, the following setting is not necessary. 65 Settings To edit an existing access point In [Current profile], select an access point to edit. Follow Procedure 4. Follow Procedure 6. To delete an existing access point In [Current profile], select an access point to delete. Click [Delete]. Click [OK]. 4 On the setting screen, set the required items. 66 Profile name (Default: clarochile) Enter an access point name. You can enter up to 15 letters with one-byte alphanumeric. APN (Default: bam.clarochile.cl) Enter APN. You can enter up to 99 letters with one-byte alphanumeric, - (hyphen), @ (at mark), . (period) and _ (under bar). Username (Default: None) Enter the user name specified by the provider. You can enter up to 64 letters with one-byte alphanumeric, - (hyphen), @ (at mark), .
(period) and _ (under bar). Password (Default: None) Enter the password specified by the provider. You can enter up to 32 letters with one-byte alphanumeric, - (hyphen), @ (at mark), .
(period) and _ (under bar). Authentication (Default: CHAP) Select the authentication method of the access point.
- None
- PAP
- CHAP 5 To register a new access point, click
[Save]. 6 Click [Apply] to save the setting. Protecting the Terminal with the Security Code When this function is set, network communication is locked and entering the security code (PIN1 code) is required when logging in to the setting page. 1 In the top menu, click [NETWORK]. 2 In the submenu, click [PIN1 lock]. 3 On the setting screen, set the required items. 67 Settings PIN1 lock status The current setting condition is displayed.
- Enable: PIN1 lock is set
- Disable: PIN1 lock is canceled 68 When Enable is set PIN1 code to disable Enter PIN1 code set to the Micro USIM card. When Disable is set PIN1 code to enable Enter PIN1 code set to the Micro USIM card. 4 Click [Apply]. 5 When Enabled is set, hold down the power button for over 2 seconds to turn the power off, and then turn on again. Unlocking PIN Lock If you improperly enter the PIN1 code for 3 times in a row, further entry is locked automatically. In this case, enter Unblocking PIN Code to unlock. 1 Enter the unblocking PIN code in [PUK code] field. 2 Enter the new PIN1 code in the [New PIN1 code] field. 3 In [Confirm PIN1 code] field, enter the same PIN1 code as [New PIN1 code] for confirmation. 4 Click [Apply]. Changing the Security Code You can change the security code (PIN1 code). Changing security code (PIN1 code) is available only when PIN1 lock is set to Enabled. 1 In the top menu, click [NETWORK]. 2 In the submenu, click [Modify PIN1 code]. 3 On the setting screen, set the required items. 69 Settings Current PIN1 code Enter PIN1 code set to the Micro USIM card. New PIN1 code Enter the new PIN1 code. Confirm PIN1 code Enter the same code as [New PIN1 code] for confirmation. 70 4 Click [Apply]. PIN1 code is changed. Displaying Network data usage The amount of data communication is displayed. Data communication in overseas is not be added to this amount. Also, the amount of data communication in the international roaming area is not displayed. 1 In the top menu, click [NETWORK]. 2 In the submenu, click [Network data usage]. 3 On the setting screen, set the required items. Current data usage Click [Refresh] to see the latest information. Click [Reset] to reset the information of usage.
*
The usage is automatically reset in the following cases.
- When the Micro USIM is replaced Maximum data size (Default: Disable) Select from KB, MB and GB, and enter the valid value*.
*
Valid value: Positive integer from 1 to 1024 Not available: Negative number, 0, decimal point and anything other than the valid value Even if maximum data size is set, data communication will not stop when data usage is over the maximum data size. It is only for your reference. 71 1 In the top menu, click [SECURITY]. 2 In the submenu, click [Firewall]. 3 On the setting screen, set the required items. Settings Display on modem (Default: Enable) Enable: The amount of data communication is displayed on the display of this terminal. Disable: The amount of data communication is not displayed on the display of this terminal. 4 Click [Apply] to save the setting. Setting Security Functions Using Firewall Function Unauthorized access via the Internet can be blocked by using the Firewall function. Also, you can set IP filter. 72 Firewall (Default: Disable) Set whether to activate the Firewall function.
- Enable: Firewall function is activated. You can set IP filter.
- Disable: Firewall function is deactivated. When Enable is set You can set IP filter. IP address When registering IP filter, enter source or destination IP address. Direction (Default: Source) Specify the direction of communication to interrupt.
- Source: Interrupt the access from the specified IP address.
- Destination: Interrupt the access to the specified IP address. IP address filter list List of registered IP filter appears.
-
: Delete registered IP filter. 4 Click [Apply]. Discarding WAN Ping You can discard the Ping request to access from WAN to prevent answering and block the IP information leakage from this terminal and LAN terminals. 73 Settings 1 In the top menu, click [SECURITY]. 2 In the submenu, click [WAN Ping blocking]. 3 On the setting screen, set the required items. 74 WAN Ping blocking (Default: Disable) Set whether to activate the WAN Ping blocking function.
- Enable: Activate the WAN Ping blocking function.
- Disable: Deactivate the WAN Ping blocking function. 4 Click [Apply]. Managing the System Changing Log-in Password You can change the log-in password of the setting page. You can enter only a 4-digit number as a password. 1 In the top menu, click [SYSTEM]. 2 In the submenu, click [Modify password]. 3 On the setting screen, set the required items. Current password Enter the current password. New password Enter the new password. Confirm password Enter the same password as [New password]
for confirmation. 4 Click [Apply]. The message Password is changed successfully appears. 5 Click [OK]. 75 Settings Saving/Restoring the Setting Data All setting data can be saved to a PC on which the setting page is opened. Also, saved setting data can be restored in this terminal. 1 In the top menu, click [SYSTEM]. 2 In the submenu, click [Backup &
Restore]. 3 In the setting screen, make the following procedures. 76 Backup to file Click [Backup], specify the file name (Default:
webcm_config.cfg) and save the current setting.
*
Depending on the browser, the file name cannot be specified. Restore from file Click [Refer to...] and specify the file to restore. 4 Click [Apply]. Resetting the Settings You can reset all settings of the setting page to default. However, the amount of data communication which is displayed on the display cannot be reset. For resetting the amount of data communication, see Displaying Network data usage. You can also reset the settings by pressing the buttons on this terminal. 1 In the top menu, click [SYSTEM]. 2 In the submenu, click [Reset]. 3 Click [Reset]. 4 Click [OK]. Log out from the setting page and the communication is disconnected. 77 Settings Confirming the Version Information 1 In the top menu, click [SYSTEM]. 2 In the submenu, click [Version]. The version information of firmware and this terminal appears. 3 Make setting for Software Update. Automatically check new S/W (Default:
ON)
- ON: Check the update file automatically.
- OFF: Check the update file manually. When ON is set The confirmation message for software update appears each time you log in. To make the message not to appear, set to OFF. When OFF is set Click [Check now] to check if you have any update files, and a message appears when a new file exists. For update procedure, see Updating Software. 4 When you have changed software update setting, click [Apply]. 78 Displaying the Inquiries 1 In the top menu, click [SYSTEM]. 2 In the submenu, click [Help]. The information of the inquiry website, phone number and the URL of Instruction Manual
(PDF) appears. 79 2 Click [NETWORK] in the top menu. 3 Click [Searching network] in submenu, and set each items. Overseas Use Setting the Searching Methods for Available Networks and Access Point Set an available network (communication operator) at your current location manually
(Manual setting is possible only for using overseas). You can make settings related to network by logging-in to the setting page. 1 Log in to the setting page. For details, see Logging-in to MOBILE ROUTER CR820. 80 NOTE:
While using overseas
- Some communication services may not be available depending on the overseas carrier or network. Mode*
Select whether to specify the access point network.
- Auto: Network that can be connected is automatically selected.
- Manual: Select to specify the network. Click
[Apply] to search the available access point and register it to [Operators]. 4 Click [Apply] to save the setting contents. 5 Click [Logout]. 81 Troubleshooting Troubleshooting Power source and charging problems Symptom Power does not turn on Check Check if the battery pack is inserted correctly. Check if the battery pack is exhausted. 82 Symptom Cannot charge Check Check the following. Check if the battery pack is inserted correctly. Check if the adapter's power plug is inserted to the outlet correctly. Check if AC Adapter is connected to this terminal correctly. Check if AC Adapter connector is connected to microUSB Connection Cable correctly. Check if the PC turns on when using microUSB Connection Cable. Operation problems Symptom This terminal becomes hot while operating or charging Check This terminal, battery pack or adapter may become hot while operating or charging. There is no problem about safety. Continue to use it. Symptom The usage time provided by the battery is short Check Check the following. Check if this terminal is left for a long time under the state out of the service area. When it is out of service area, more powers is consumed to search available radio waves. The usage time provided by the battery pack varies by the operation environment and battery pack's deterioration. The battery pack is a consumable part. Each time it is charged, the usage time with each charging reduces. Even in the full charge state, when the usage time is too short, purchase a new battery pack of the specified type. 83 Troubleshooting Check This terminal is not recognized If the jack of battery pack is dirty, the contact may become poor and the power may shut off. If it is dirty, clean with a dry cloth or cotton swab. Check if the Micro USIM is inserted in the correct direction. Check Check if this terminal is correctly connected to the PC with microUSB Connection Cable. Remove microUSB Connection Cable from the PC, restart the PC and reconnect. Symptom This terminal is not recognized by the PC connected with microUSB Connection Cable Symptom The power turns off or restarts automatically The Micro USIM is not recognized 84 Symptom This terminal is not recognized by the PC connected with microUSB Connection Cable Check Uninstall CR820 driver and reconnect. To uninstall the driver For Windows 7 Control
(Start) Program Click panel Program and function.
- Uninstall or modify program window appears. Select LG Router Driver and click Uninstall. Click OK. Click OK. Symptom This terminal is not recognized by the PC connected with microUSB Connection Cable Check For Windows Vista Click
(Start) Control panel Program and function. Settings Program
- Uninstall or modify program window appears. Select LG Router Driver and click Uninstall. Click Continue. Click OK. Click OK. 85 Troubleshooting Symptom This terminal is not recognized by the PC connected with microUSB Connection Cable Check For Windows XP Click Start Control panel Add or delete program.
- Add or delete program window appears. Select LG Router Driver and click Delete. Click OK. Confirm that W-TCP (Cancel optimization of W-TCP function
(Recommended)) has selected, and click Complete. 86 Problems with wireless LAN Symptom Cannot connect the wireless LAN terminal Check Check if the wireless LAN functions of this terminal and the wireless LAN terminal are turned on. Check if the correct Security key is set to the wireless LAN terminal. If you forget the Security key set to this terminal, see Setting Security Mode of Wireless LAN (Security) to reset Security key and make connecting operation again. Symptom Cannot connect the wireless LAN terminal Check If the security mode other than WEP2-PSK is set to this terminal, you need to make the same settings for the target wireless LAN terminal. For details, refer to the instruction manual of your wireless LAN terminal. Example: Security mode is WEP
(Start) Control panel) Network and Sharing For Windows 7 Click Network and Internet Center Manage Wireless Networks Right click the name of this terminal and Properties
- Security Type: no authentication
- Encryption Type: WEP
- Network Security Key: WEP key of this terminal whose number is selected in Key index Security tab Set following:
Symptom Cannot connect the wireless LAN terminal Check Example: Security mode is WEP
[System
[ [Network]
For Mac OS 10.7
[Apple] menu Preferences...]
Select [Wi-Fi] on the left screen
[ + ]
[Edit network] on [Network]
Enter any name in [Untitled]
[OK]
Check [Display Wi-Fi status on menu bar]
Select [Wi-Fi] on tab located in the upper of screen
[ + ]
[WEP] in [Security]
1 of this terminal in [Password]
[OK]
the status is [OFF], and [Apply]
Check [Wi-Fi ON] if Select Enter WEP key Enter network name
[Details]
[OK]
87 Troubleshooting Symptom Cannot connect the wireless LAN terminal Check Communication problems If the connection cannot be made with the WPS function, refer to the instruction manual of your wireless LAN terminal, check the setting of the WPS function, and then make connecting operation again. When connecting the wireless LAN terminal to which PIN code from WPS is specified, check if WPS PIN is selected in WPS function settings of this terminal and the correct PIN code is set. Symptom Communications are not possible Check Check if signals are received in the service area. If a security code is set to the Micro USIM, log in to the setting page and enter PIN1 code. Check the settings of this terminal and the APN registration. Depending on the radio wave condition, the Internet connection may not be available. In that case, turn this terminal off and turn it on again. 88 Symptom Communications are not possible Check Overseas use problems When connecting to the Internet with this terminal, check that other communication devices are disconnected. Internet connection is unavailable when an icon shows not connected appears on the display of this terminal.
- Hold down the Wi-Fi button for more than 2 seconds to turn on the Wi-Fi function.
- Top menu of MOBILE ROUTER CR820 Click NETWORK Profile, confirm that the settings are correct. Symptom Cannot perform communication overseas
(when out of service area is displayed) Check Change the network settings or the setting of overseas communication operator.
- Set Searching network to Manual.
- Confirm Profile settings. It may recover by turning this terminal's power off and on. 89 Troubleshooting Symptom Communication becomes unavailable suddenly while using overseas Check Check if the usage charge has exceeded the limit. If the charge has exceeded the limit, pay the cumulative price. Symptom Internet connection speed decreased suddenly Other problems Check Check that the Micro USIM is properly inserted to this terminal. Symptom This terminal stopped working suddenly 90 Back Cover is deviated Check Speed may be decreased in unsteady areas such as LTE/W-CDMA/HSDPA/HSUPA service environment. Move it to another place and connect again. To perform communication with Windows XP, the optimization of PC communication setting is necessary. Connect this terminal and a PC with USB Extension Cable and install the driver. Confirm that W-TCP (Use W-TCP function (Recommended)) is selected. Fit Back Cover to this terminal, and press each tab to close it firmly. Error Messages The following messages may appear when using the setting page (MOBILE ROUTER CR820). Error Messages The password you entered is not correct. The PIN1 code you entered is not correct. Description An incorrect password is entered for log-in. Click [OK] and enter the correct password. An incorrect PIN1 code is entered. Click [OK] and enter the correct PIN1 code. Error Messages PIN1 code is blocked. The PUK code you entered is not correct. Description PIN1 code is locked because PIN1 code has been improperly entered 3 times in a row. Click
[OK], enter unblocking PIN code in [PUK code] and new PIN1 code in [New PIN1 code] and [Confirm PIN1 code]. Click [Apply]. An incorrect unblocking PIN1 code is entered. Click [OK] and enter the correct unblocking PIN code. 91 Troubleshooting Error Messages PUK code is blocked. Your Micro USIM card is not valid any more. Description Micro USIM is locked because unblocking PIN1 code has been improperly entered 10 times in a row. Please contact service center. Warranty and After-Sales Service Warranty A written warranty is provided with every terminal. Make sure that you receive it. 92 Store the warranty in a safe place after you read it and verified that it contains the Shop name/date you purchased the product. If the written warranty does not contain the necessary information, contact the shop where you purchased the product. The warranty is valid for a period of one year from the date of purchase. This product and all accessories are subject to change, in part or whole, for the sake of improvement without prior notice. Resetting this Terminal To reset the terminal to the default settings, make the following procedures. However, the displayed Network data usage will not be reset. For the details about resetting Network data usage, see "Displaying Network data usage". 1 Press both the WPS button and Wi-Fi button at the same time for approximate 15 seconds. RESET appears on this terminal's screen, and the terminal is reset. 93 Troubleshooting Main Specifications Terminal CR820 Approx. 90mm Approx. 62mm Approx. 12.6 (thick part: 12.9) mm Approx. 83.5g
(with battery pack installed) Model name Dimensions
(HWD) Weight 94 Continuous communication time Display Charging time LTE 3G (HSDPA/
HSUPA, W-CDMA) LTE 3G (HSDPA/
HSUPA, W-CDMA) Approx. 4 hours Approx. 5 hours Approx. 160 hours Approx. 320 hours AC Adapter: Approx. 200minutes USB: Approx. 270minutes Battery pack Model name Battery type Nominal voltage Nominal capacity Battery Pack Lithiumion battery 3.8V 1,700mAh Display Type Size Pixels Communication method Communication speed Organic EL Approx. 1.2 inches 128 dots (Horizontal) 96 dots (Vertical) WAN: LTE/HSDPA/
HSUPA/W-CDMA Wireless LAN:
IEEE802.11b/g/n Packet communication:
Up to 100Mbps for receiving data Up to 50Mbps for sending data 95 Guidelines for safe and efficient use Body-worn Operation This Mobile Broadband USB Modem, model CR820, is approved for use in normal size laptop computers only (typically with 12 or larger display screens). To comply with FCC RF exposure requirements, this modem should not be used in configurations that cannot maintain at least 0.5cm (approximately 0.2inches) from your body. Also, when using the USB extension cable, place the USB modem away from your body or any other transmitter of the laptop or PC. This USB modem has been tested for compliance with FCC/IC RF exposure limits in the laptop computers configurations with horizontal and vertical USB slots and can be used in laptop computers with substantially similar physical dimensions, construction and electrical and RF characteristics. 96 When using this USB modem in your computer, it must not be co-located or simultaneously transmit with any other radio (forexample, Bluetooth or WiFi radios) in the computer. Part 15.21 statement Change or modifications that are not expressly approved by the manufacturer could void the users authority to operate the equipment. FCC Part 15 Class B Compliance This device and its accessories comply with part15 of FCC rules. Operation is subject to the following two conditions:
(1) This device and its accessories may not cause harmful interference.
(2) This device and its accessories must accept any interference received, including interference that causes undesired operation. 97 Guidelines for safe and efficient use Part 15.105 statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no 98 guarantee that interference will not occur in a particular installation. If you experience interference with reception (e.g., television), determine if this equipment is causing the harmful interference by turning the equipment off and then back on to see if the interference is affected. If necessary, try correcting the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Consumer Information on SAR
(Specific Absorption Rate) This device meets the government's requirements for exposure to radio waves. Your wireless device is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to Radio Frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. 99 Guidelines for safe and efficient use The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions specified by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. Because the device is designed to operate at multiple power levels to use only the power required to reach the network, in general, the closer you are to a wireless base station antenna, the lower the power output. Before a device is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests 100 found on the Cellular Telecommunications Industry Association (CTIA) website at http://www.ctia.org/. are performed in positions and locations
(e.g., at the ear and worn on the body) as required by the FCC for each model. The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of http://
www.fcc.gov/oet/fccid after searching on FCC ID ZNFCR820. Additional information on Specific Absorption Rates (SAR) can be 101
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2013-04-10 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
2 | JBP - Part 15 Class B Computing Device Peripheral | |||
3 | 2514 ~ 2527 | PCB - PCS Licensed Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2013-04-10
|
||||
1 2 3 | Applicant's complete, legal business name |
LG Electronics USA, Inc.
|
||||
1 2 3 | FCC Registration Number (FRN) |
0020917688
|
||||
1 2 3 | Physical Address |
1000 Sylvan Ave.
|
||||
1 2 3 |
Englewood Cliffs, New Jersey 07632
|
|||||
1 2 3 |
United States
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
L******@ul.com
|
||||
1 2 3 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 3 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
1 2 3 |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
ZNF
|
||||
1 2 3 | Equipment Product Code |
CR820
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
K****** H******
|
||||
1 2 3 | Title |
Director, Standards & Compliance
|
||||
1 2 3 | Telephone Number |
201-2********
|
||||
1 2 3 | Fax Number |
201-8********
|
||||
1 2 3 |
k******@lge.com
|
|||||
app s | Technical Contact | |||||
1 2 3 | Firm Name |
Sporton International Inc.
|
||||
1 2 3 | Name |
J**** T****
|
||||
1 2 3 | Physical Address |
No.52, HwaYa 1st Rd., Kwei-Shan Hsiang
|
||||
1 2 3 |
Taoyuan Hsien, 94538
|
|||||
1 2 3 |
Taoyuan Hsien
|
|||||
1 2 3 |
Taiwan
|
|||||
1 2 3 | Telephone Number |
886-3******** Extension:
|
||||
1 2 3 | Fax Number |
886-3********
|
||||
1 2 3 |
E******@Sporton.com.tw,IreneChung@Sporton.com.tw
|
|||||
app s | Non Technical Contact | |||||
1 2 3 | Firm Name |
Sporton International Inc.
|
||||
1 2 3 | Name |
J**** T********
|
||||
1 2 3 | Physical Address |
No.52, HwaYa 1st Rd., Kwei-Shan Hsiang
|
||||
1 2 3 |
Taoyuan Hsien, 333
|
|||||
1 2 3 |
Taiwan
|
|||||
1 2 3 | Telephone Number |
886-3********
|
||||
1 2 3 | Fax Number |
886-3********
|
||||
1 2 3 |
E******@Sporton.com.tw,IreneChung@Sporton.com.tw
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 09/25/2013 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 3 | JBP - Part 15 Class B Computing Device Peripheral | |||||
1 2 3 | PCB - PCS Licensed Transmitter | |||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | WCDMA & LTE Wireless Router with WLAN | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Original Equipment | ||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | Output power is conducted. This device is approved for use in the handset described in the filing. SAR compliance for body-worn operation is based on a separation distance of 1.0 cm between the unit and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR values for body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions are 0.20 W/kg, 0.20 W/kg, and 1.46 W/kg respectively. | ||||
1 2 3 | Output power is ERP below 1GHz and EIRP above 1GHz. SAR compliance for body-worn operation is based on a separation distance of 1.0 cm between the unit and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR values for body-worn accessory, product specific (wireless router) and simultaneous transmission conditions are 1.28 W/kg, 1.28 W/kg and 1.46 W/kg respectively. This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. | |||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
Sporton International Inc.
|
||||
1 2 3 |
SPORTON International Inc.
|
|||||
1 2 3 | Name |
A******** C********
|
||||
1 2 3 | Telephone Number |
886-3******** Extension:
|
||||
1 2 3 |
886-2******** Extension:
|
|||||
1 2 3 | Fax Number |
886-3********
|
||||
1 2 3 |
886-2********
|
|||||
1 2 3 |
a******@sporton.com.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2412.00000000 | 2462.00000000 | 0.1489000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15B | |||||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 22H | 826.4 | 846.6 | 0.0855 | 0.01 ppm | 4M16F9W | ||||||||||||||||||||||||||||||||||
3 | 2 | 24E | 1852.4 | 1907.6 | 0.2924 | 0.01 ppm | 4M18F9W | ||||||||||||||||||||||||||||||||||
3 | 3 | 27 | 2506.5 | 2567.5 | 0.3381 | 0.005 ppm | 4M50G7D | ||||||||||||||||||||||||||||||||||
3 | 4 | 27 | 2506.5 | 2567.5 | 0.2704 | 0.013 ppm | 4M50D7W | ||||||||||||||||||||||||||||||||||
3 | 5 | 27 | 2509 | 2565 | 0.3802 | 0.004 ppm | 9M10G7D | ||||||||||||||||||||||||||||||||||
3 | 6 | 27 | 2509 | 2565 | 0.2858 | 0.006 ppm | 9M10D7W | ||||||||||||||||||||||||||||||||||
3 | 7 | 27 | 2514 | 2527 | 0.3221 | 0.008 ppm | 18M7G7D | ||||||||||||||||||||||||||||||||||
3 | 8 | 27 | 2514 | 2527 | 0.2793 | 0.006 ppm | 18M8D7W |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC