FCC ID: 2AMW3-697A TOY CAR

WARNING 1.Do not operate the model in the vicinity of another model using the same frequency. 2.Otherwise,radio signals may interfere with each other and the model cars may become out of control,causing accidents 3.Use alkaline battery and rechargeable battery correctly. 4.Always turn off power of the model car and the remote controller in sequence after use. 5.If this model is to be stored for a long time,all batteries in the model car and the remote controller should be removed to avoid battery leakage. Consumer should read!

1.Please take care not damaging any furniture or glass as indoor play. 2.Do not play it among crowd or public road to avoid some accident, please choose a safe outdoor site to play. 3.Stop playing it immediately when thundering as outdoor play. 4.Do not play this car on a wet site or sand lot to avoid some electronic circuit problems. 5.Do not fold the antenna rudely, since a broken antenna may cause personal injury. 6.Do not drag or pull the wire on car body, since a broken wire will lose car function. 7.Do not touch the car wheel with finger or hand to avoid accident. 8.Do not run this car toward people. 9.This car cannot be thrown or impacted rudely. 10.When keeping this car, please keep it away from fire and high temperature. 11.A great number of electronic elements and circuits have been adopted inside this car, please do not attempt to dismantle or modify such circuit board. 12.When the car or controller lacks enough power, an obvious slowdown or out of control condition will happen, please replace the batteries. 13.If this car is idle for a long time, please take out the batteries, so its durability will be extended.

ID Label & Label Location 45mm(L)10mm(W) FCCID: 2AMW3-697A 90mm(L) 35mm(W) This device complies with Parth 15 of the FCC Rules.Opertion is The label stamped to the equipment by permanent adhesive. subject to the foiiowing two conditions: (1) this device may not cause harmful interference ,and(2)this device must accept any interference received,including interfeience that may cause undesired operation. The label stamped to the equipment by permanent adhesive.

LI XIONG SHENG TOYS FACTORY Date: 11/07/2022 TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AMW3-697A To whom it may concern:

We, the undersigned, hereby authorize Compliance Certification Services (Kunshan) Inc to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with LI XIONG SHENG TOYS FACTORY This authorization is valid until further written notice from the applicant. Sincerely, Print Name: ZHUANG SEHNG CHEN Title: manager Signature:

On behalf of Company: LI XIONG SHENG TOYS FACTORY Telephone: 0754-85167568 E-mail: 694631874@qq.com

LI XIONG SHENG TOYS FACTORY To:

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Regarding:

Confidentiality Request regarding application for FCC ID: 2AMW3-697A LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Print Name: ZHUANG SEHNG CHEN Title: manager Signature:

On behalf of Company: LI XIONG SHENG TOYS FACTORY Telephone: 0754-85167568 E-mail: 694631874@qq.com

SGS North America Inc. j i i Re eee re Applicant Declaration SUITE 100 Suwanee, Georgia 30024 United States LI XIONG SHENG TOYS FACTORY BEIWAN INDUSTRIAL AREA,LIANXIA TOWN,CHENGHAI DISTRICT,SHANTOU CITY,GUANGDONG PROVINCE,CHINA 2AMW3

|, the undersigned, certify that | am an authorized signatory for the Applicant and therefore declare;

Address Grantee Code Authorized Contact Name Contact Email Contact Phone a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

(1) labeling the equipment with the exact FCC ID as specified in this application,

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, c) _ if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing.

(2) the Applicant shal! make provisions to always have a production sample available upon request by SGS, FCC and/or ISED.

(3) the Applicant shail, upon request by SGS, at the Applicant's expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https: /Avww. icc. gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-requiations-title-47 Link to KDBs: https /apps. fcc. gov/oetef/kdb/index.cim Link to RSP-100: httos:/Avww.ic ge. cafeic/site/smt-ast nsffeng/sf01130.htmt Link to the Covered List: Covered List

& [LI XIONG SHENG TOYS FACTORY] ("the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules.

& [LI XIONG SHENG TOYS FACTORY] (the applicant) certifies that, as of the date of the filing of the application, the applicant [is not]

identified on the Covered list, established pursuant to 1.50002, as an entity producing covered equipment. Applicant Signature:

DNVANG GUA, OA ZHUANG SHENG CHEN

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Date: 03/03/2023 Print Name:

QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021

UNITED STATES DESIGNATED AGENT LETTER Date: 17/03/2023 TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant Company Name:

Grantee Code:

Contact Name:

Address:

Telephone:

Email:

LI XIONG SHENG TOYS FACTORY 2AMW3 ZHUANG SEHNG CHEN BEIWAN INDUSTRIAL AREA,LIANXIA TOWN,CHENGHAI DISTRICT,SHANTOU CITY,GUANGDONG PROVINCE,CHINA 0754-85167568 694631874@qq.com Applicable Equipment: FCC ID: 2AMW3-697A ATTN: Director of Certification:

U.S. designated agent Company Name:

FRN:

Contact Name:

Address:

United Consulting Technology Services Co., Ltd. 0033495714 David Wu 17800 CASTLETON ST STE 665 CITY OF INDUSTRY CA 91748 United States Telephone:

Email:

(626) 217-4022 David@uc-ts.com We, < LI XIONG SHENG TOYS FACTORY and < United Consulting Technology Services Co., Ltd.>

understand and acknowledge the applicants consent and the designated agent s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, < LI XIONG SHENG TOYS FACTORY > and < United Consulting Technology Services Co., Ltd.>

acknowledge the applicants acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year af ter either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name (Printed): ZHUANG SEHNG CHEN Name (Printed): David Wu Title: manager Signature:

Title: General Manager Signature: