all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 1.15 MiB | April 18 2019 | |||
1 |
|
Internal Photos | Internal Photos | 238.98 KiB | April 18 2019 | |||
1 |
|
External Photos | External Photos | 149.29 KiB | April 18 2019 | |||
1 |
|
Label and Label Location | ID Label/Location Info | 578.32 KiB | April 18 2019 | |||
1 |
|
Authorization Letter | Cover Letter(s) | 1.61 MiB | April 18 2019 | |||
1 | Block Diagram | Block Diagram | April 18 2019 | confidential | ||||
1 | Circuit diagram | Schematics | April 18 2019 | confidential | ||||
1 |
|
Confidentiality Letter | Cover Letter(s) | 630.24 KiB | April 18 2019 | |||
1 |
|
Declaration Letter for Model different | Cover Letter(s) | 560.43 KiB | April 18 2019 | |||
1 | Operational Description | Operational Description | April 18 2019 | confidential | ||||
1 |
|
Power of Attorney Letter | Cover Letter(s) | 41.86 KiB | April 18 2019 | |||
1 | Test Setup Photos | April 18 2019 | ||||||
1 | Test Report | April 18 2019 |
1 | User Manual | Users Manual | 1.15 MiB | April 18 2019 |
Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 About these operating instructions . . . . . . . . . . . . . . . . . . . . . . . 3 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Used Warning types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety instructions for batteries . . . . . . . . . . . . . . . . . . . . . . . . . 6 Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Description of parts . . . . . . . . . . . . . . . . . . . . . . . . . . 9 First use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Requirements at the setup location . . . . . . . . . . . . . . . . . . . . . 10 Using the outdoor sensor for the first time . . . . . . . . . . . . . . . . 11 Using the weather station for the first time . . . . . . . . . . . . . . . . 11 Handling and operation . . . . . . . . . . . . . . . . . . . . 14 Displays in basic mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Basic settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Displaying the maximum/minimum temperature/humidity . . . 19 Changing the temperature unit on the outdoor sensor . . . . . . 19 Background lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Battery replacement indicator . . . . . . . . . . . . . . . . . . . . . . . . . 20 Switching the channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 US - EN1 IB_314696_AHFL433B2_WeatherStation_LB9.indb 1 26.03.19 14:40 AHFL 433 B2 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Disposal of device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Disposal of batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Disposal of the packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Technical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 FCC Compliance Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 3 year limited warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Distributor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 2US - EN IB_314696_AHFL433B2_WeatherStation_LB9.indb 2 26.03.19 14:40 AHFL 433 B2 Introduction About these operating instructions Congratulations on purchasing your new device . You have selected a high-quality product . The operating instruc-
tions are part of this product . They contain important information about the safety, usage and disposal of the product . Before using the product, please familiarize yourself with all operating and safety information . Use the product only as described and for the specified range of applications . Keep these operating instructions in a safe location . In addition, please pass these documents on, together with the product, to any future owner . Intended use The wireless weather station shows you the inside and outside temperature in degrees Fahrenheit (F) or degrees Celsius (C), as well as the minimum and maximum temperatures . The inside and outside humidity (%), as well as the minimum and maximum values, are also shown . Further indications include recommended ventilation time, indoor climate rating, indoor climate changes, and a radio-controlled time display in 12- or 24-hour format . The product is intended exclusively for private households, and is not recommended for commercial use . Any use other than the intended use is considered to be improper . The manufacturer accepts no responsibility for damage caused by improper use or repairs, unauthorized modifications, or the use of unapproved replacement parts . The risk is borne solely by the user . US - EN3 IB_314696_AHFL433B2_WeatherStation_LB9.indb 3 26.03.19 14:40 AHFL 433 B2 Used Warning types The following types of warning are used in these operating instructions:
WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury . NOTICE indicates information that is considered important, but not hazardous (e . g . messages related to property damage) . A tip provides additional information that will assist you in using the device. 4US - EN IB_314696_AHFL433B2_WeatherStation_LB9.indb 4 26.03.19 14:40 AHFL 433 B2 Safety This section contains important safety instructions for handling the device . Improper use may result in personal injury and/or property damage . IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE!
SAVE THESE INSTRUCTIONS This device may only be used by children aged 8 years and above and by persons with limited physical, sensory or mental capabilities or lack of experience and knowledge, if it is provided that they are being supervised or have been instructed on how to use the device safely and are aware of the potential risks . Children must not play with the device . Cleaning and user maintenance tasks may not be carried out by children unless they are supervised . Before using the product for the first time, make sure it is not damaged! Do not operate devices that are damaged . Only use the weather station in dry indoor areas . Make sure the weather station is not exposed to humidity or direct sunlight . US - EN5 IB_314696_AHFL433B2_WeatherStation_LB9.indb 5 26.03.19 14:40 AHFL 433 B2 Safety instructions for batteries Mishandling the batteries can cause fires, explosions, leakages, or other hazards! In order to handle batteries safely, please observe the following safety instructions:
Do not throw the batteries into a fire and do not subject them to high temperatures . Do not open, deform, or short-circuit batteries, since this can lead to chemical leakage . Do not attempt to recharge the batteries . Do not charge batteries unless they are explicitly labeled as "rechargeable" . There is a risk of explosion!
Never heat batteries in order to revive them . Check the condition of the batteries at regular intervals . Leaking chemicals can cause permanent damage to the device . Take particular care when handling damaged or leaking batteries . Risk of acid burns! Wear protective gloves . Chemicals that leak from a battery can cause skin irritation . In the event of contact with the skin, rinse with plenty of water . If the chemicals come into contact with your eyes, rinse them thoroughly with water, and do not rub them . Consult a physician immediately . Keep batteries out of the reach of children . Children might put batteries into their mouth and swallow them . If a battery has been swallowed, seek medical assistance immediately . Also, contact your local poison control center . 6US - EN IB_314696_AHFL433B2_WeatherStation_LB9.indb 6 26.03.19 14:40 AHFL 433 B2 Do not mix alkaline, carbon-zinc (standard), Ni-Cd (recharge-
able) or other types of batteries . Use only the correct type and size of battery indicated . Always insert the batteries the right way (observe correct polarity); otherwise there is a risk that they could explode . Clean the battery contacts and also those of the device prior to battery installation . If you do not intend to use the device for a long time, remove the batteries . Remove discharged batteries from equipment promptly to avoid possible damage from leakage . Always replace the whole set of batteries at one time, taking care not to mix old and new ones . If the battery compartment does not close securely, stop using the product and keep it away from children . US - EN7 IB_314696_AHFL433B2_WeatherStation_LB9.indb 7 26.03.19 14:40 AHFL 433 B2 Package contents The scope of delivery consists of the following components:
1 wireless weather station 1 outdoor sensor 5 batteries, type AAA 3 wall plugs 3 screws Operating instructions Check the package for completeness and signs of visible dam-
age. If the delivery is incomplete or damage has occurred as a result of defective packaging or during transport, contact the service hotline. Remove all parts from the packaging and remove all pack-
aging material . Do not allow children to play with the packaging materials!
Keep all packaging materials away from children . Risk of suffocation!
8US - EN IB_314696_AHFL433B2_WeatherStation_LB9.indb 8 26.03.19 14:40 AHFL 433 B2 Description of parts See foldout page for illustrations Figure A Display 1 Indoor climate change display 2 Time display 3 Display field for outdoors 4 Control surface 5 Control surface 6 Control surface 7 Display field for indoors Weather station 8 LIGHT button 9 Fixing lugs 0 Battery compartment q Stand w Battery compartment cover US - EN9 IB_314696_AHFL433B2_WeatherStation_LB9.indb 9 26.03.19 14:40 AHFL 433 B2 Figure B Outdoor sensor e Display r Indicator LED t Fixing lugs z TX button u C/F button i Channel switch o Battery compartment p Battery compartment cover a Stand First use Before use, insert a battery first into the outdoor sensor and then into the weather station. Requirements at the setup location When selecting the setup location, make sure the devices are not exposed to direct sunlight, vibration, dust, heat, cold or humidity . Do not set up the device near sources of heat, e .g . heaters . Mount the outdoor sensor within a maximum radius of 164 ft to the weather station . Make sure there are no interfering ob-
stacles between the outdoor sensor and the weather station . Otherwise, there could be transmission interference . 10US - EN IB_314696_AHFL433B2_WeatherStation_LB9.indb 10 26.03.19 14:40 AHFL 433 B2 Both the weather station and the outdoor sensor can be hung up using the fixing lugs 9/t . Alternatively, the stands q and a of the weather station and the outdoor sensor can be folded out for placement on an even, level surface . Using the outdoor sensor for the first time Open the battery compartment o on the back of the device by sliding the battery compartment cover p in the direction of the arrow . Insert two type AAA batteries as indicated in the battery compartment o . Then, close the battery compartment o . The indicator LED r lights up briefly, and the current temperature, humidity and selected channel (e .g . CH 1) are shown on the display e . The indicator LED r then lights up once per minute, indi-
cating wireless transmission . Using the weather station for the first time Open the battery compartment 0 on the back of the device by removing the battery compartment cover w . Insert three type AAA batteries as indicated in the battery compartment 0 . Then, close the battery compartment 0 . After a power supply has been connected, the display lights up and quickly checks all display elements . The weather station will now attempt to connect to the outdoor sensor . On the display field for outdoors 3, the reception icon above the channel display blinks . US - EN11 IB_314696_AHFL433B2_WeatherStation_LB9.indb 11 26.03.19 14:40 AHFL 433 B2 If no outside temperature or humidity is shown within approx. 3 minutes, the weather station stops searching for a signal. The reception icon shows and to structural conditions or because the sensor is too far away. turns off and the display field for outdoors 3
. The system likely cannot detect a signal due If the device is unable to connect to the outdoor sensor automati-
cally, you can establish a connection manually:
Press and hold the control surface 4 until the reception icon on the display field for outdoors 3 blinks . Press the TX button z to manually start the wireless signal for the outdoor sensor . The weather station automatically starts to receive the WWVB signal after 3minutes, regardless of whether the outdoor sensor reception search has been successful or not . The reception icon flashes on the time display2 . If the recep-
tion icon is not flashing completely (
) on the display, it means that the reception of the WWVB signal is too weak and the time cannot be synchronized . Try to find a set-up location where the reception icon flashes completely (
If the WWVB signal is being received correctly, the current Eastern standard time (EST) is shown on the time display2 . In addition, is permanently shown on the time display2 . the reception icon
) on the display . 12US - EN IB_314696_AHFL433B2_WeatherStation_LB9.indb 12 26.03.19 14:40 AHFL 433 B2 The default time zone of the weather station is Eastern Standard Time (EST). To change the time zone please refer to Basic settings section. If the device is unable to synchronize with the WWVB signal, you can also set the time manually (see Basic settings section) or you can attempt automatic reception again . Briefly press control surface 5 to attempt the reception search again . The reception icon display2 . flashes on the time The WWVB signal WWVB is a National Institute of Standards and Technology
(NIST) time signal radio station near Fort Collins, Colorado . The 70 kW ERP signal transmitted from WWVB is a continuous 60 kHz carrier wave, the frequency of which is derived from a set of atomic clocks located at the transmitter site, yielding a frequency uncertainty of less than 1 part in one trillion . Under ideal conditions, the weather station can receive the signal up to a distance of approximately 2000 miles from the transmitter . Reception of the WWVB signal normally takes between 3 and 5 minutes . If reception of the WWVB signal fails, the weather station will stop trying to establish reception after approximately 7 minutes . Reception can be considerably restricted by obstacles
(e .g . concrete walls) or interference sources (e .g . other electronic devices) . If reception problems persist, you should change the location of the weather station (e .g . put it by a window) . US - EN13 IB_314696_AHFL433B2_WeatherStation_LB9.indb 13 26.03.19 14:40 AHFL 433 B2 Handling and operation Displays in basic mode After the weather station has received the signal from the outdoor sensor and the WWVB signal, the device enters basic mode . In basic mode, the weather station shows the following informa-
tion on the display:
The time display 2 By default, the time is shown in 12-hour format . In the time from 12:00 noon to
(Latin for "post meridi-
11:59 p .m ., em" = afternoon) will appear before the time . In the time from 12:00 midnight to 11:59 a .m .,
"ante meridiem" = morning) will appear before the time . During
(daylight saving time) is displayed . This display is summer, only shown if the WWVB signal is being received . If you live in an area that does not recognize daylight saving time (i .e . parts of Arizona and Indiana), you must turn off this function (see Basic settings section) .
(Latin for 14US - EN IB_314696_AHFL433B2_WeatherStation_LB9.indb 14 26.03.19 14:40 AHFL 433 B2 The display field for indoors 7 The inside temperature measured by the weather station is shown with a precision of a
(for tenth of a degree . The temperature unit degrees Fahrenheit) appears on the right . You can also switch the temperature unit to
(degrees Celsius) . appears, the station has detected a temperature below the If measurement range of 14 F to 122 F (-9 .9 C to 50 C);
indicates this range has been exceeded . The relative humidity
(RH) measured by the weather station is shown in % above the temperature display . When the relative humidity is higher than 85% or lower than 30%, the humidity warning icon appear . A recommended ventilation time is shown next to the temperature and the indoor climate rating is shown below the temperature . will Recommended ventilation time Based on the temperature and humidity values inside and out-
side, the weather station provides a recommendation to open
) the window to improve the indoor climate .
(
) or close (
US - EN15 IB_314696_AHFL433B2_WeatherStation_LB9.indb 15 26.03.19 14:40 AHFL 433 B2 Indoor climate rating Based on the humidity value indoors, the weather station catego-
rizes the current indoor climate into five levels:
Humidity 85% . Humidity between 66% and 84% . Humidity between 45% and 65% . Humidity between 30% and 44% . Humidity 29% . In addition, the bar graph graphically displays the measured humidity levels from 0, 3, 6, 9, and 12 hours ago . Indoor climate change display 1 Using the recorded measurements (inside and outside), the weather station calculates the change to the indoor climate that can be expected . The symbols indicate how ventilating the room would affect the indoor climate:
The expected increase in humidity is 5% or higher . The expected increase or decrease in humidity is 4%
or less . The expected decrease in humidity is 5% or higher . 16US - EN IB_314696_AHFL433B2_WeatherStation_LB9.indb 16 26.03.19 14:40 AHFL 433 B2 The display field for outdoors 3 The outside temperature is shown with a precision of a tenth of a degree . The temperature unit
(for degrees Fahrenheit) appears on the right . You can also switch the temperature unit to
(degrees Celsius) . If the outside temperature drops to 37 .4 F, the frost warning icon appears, the station has detected a temperature below the If measurement range of 40 F to 140 F (40 C to 60 C);
appears . indicates this range has been exceeded . The relative humidity
(RH) measured by the outdoor sensor is shown in % above the temperature display . In addition, the channel used by the connected outdoor sensor is shown (e .g . Basic settings Press and hold the control surface
) . 5 for about 3 seconds . The hour indicator in the time display 2 blinks . Press the control surface 4 or control surface 6 to set the desired value . Press the control surface 5 to confirm your input . The minute indicator in the time display 2 blinks . 4 or control surface Press the control surface 6 to set the desired value . Press the control surface In the time display 2, 5 to confirm your input . blinks . 4 or control surface Press the control surface 6 to select the desired time format (24-hour or 12-hour format) . US - EN17 IB_314696_AHFL433B2_WeatherStation_LB9.indb 17 26.03.19 14:40 AHFL 433 B2 Press control surface 5 to confirm your input . In the time display 2, flashes (indicator for temperature unit) . Press control surface select the desired temperature unit (
4 or control surface
) . or 6 to Press control surface 5 to confirm your input . The cur-
rent time zone setting flashes in the time display 2 . Press control surface 4 or control surface 6 to set the desired time zone:
#
0 1 2 3 Time zone Pacific Standard Time (PST) Mountain Standard Time (MST) Central Standard Time (CST) Eastern Standard Time (EST) Press control surface 5 to confirm your input . In the time display 2, flashes (current DST setting) . If desired, press control surface 4 or control surface 6 to select the setting to deactivate the DST function . Press the control surface 5 to confirm your input . The display switches to basic mode . 18US - EN IB_314696_AHFL433B2_WeatherStation_LB9.indb 18 26.03.19 14:40 AHFL 433 B2 Displaying the maximum/minimum temperature/humidity After connection to the power supply and the outdoor sensor has been established, the maximum and minimum values for temperature and humidity are automatically captured and stored by the weather station . In basic mode, press the control surface 6 once . In both display fields (3 and 7), the to the humidity and the highest measured value for both inside and outside is shown . icon appears next If you press the control surface 6 in basic mode, the icon appears and the lowest measured value for both inside and outside is shown . After about 5 seconds, the current values for inside and outside are automatically shown once more . Press and hold the control surface 6 for about 3 seconds to delete the stored values . Changing the temperature unit on the outdoor sensor Upon delivery, the temperature unit is set to degrees Fahrenheit
(
) by default . Open the battery compartment o on the back of the device by removing the battery compartment cover p . Press the C/F button u to change the temperature unit on the outdoor sensor display e . Close the battery compartment o . US - EN19 IB_314696_AHFL433B2_WeatherStation_LB9.indb 19 26.03.19 14:40 AHFL 433 B2 Background lighting The background lighting on the display turns off after about 5 seconds to save battery power . Press the LIGHT button 8 to turn on the display back-
ground lighting for about 5 seconds . Battery replacement indicator When the battery icon appears in the display field for inside 7, you should replace the batteries in the weather station as soon as possible (see also the chapter Using the weather station for the first time) . When the battery icon appears in the display field for outside 3 or in the display e of the outdoor sensor, you should replace the batteries in the outdoor sensor as soon as possible (see also the chapter on Using the outdoor sensor for the first time) . 20US - EN IB_314696_AHFL433B2_WeatherStation_LB9.indb 20 26.03.19 14:40 AHFL 433 B2 Switching the channel Switching the channel on the outdoor sensor You can choose between 3 different channels . Channel 1 is set by default . Open the battery compartment o on the back of the device by removing the battery compartment cover p . Choose a channel by moving the channel switch i to CH 1, CH 2 or CH 3 . Press and hold the control surface 4 until the reception icon on the display field for outdoors 3 blinks . Press the TX button z to manually start the wireless signal for the outdoor sensor . After the signal is received, the temperature and humidity are shown in the display field for outdoors 3 on the new channel . Close the battery compartment o . US - EN21 IB_314696_AHFL433B2_WeatherStation_LB9.indb 21 26.03.19 14:40 AHFL 433 B2 Switching the channel display on the weather station When the weather station has received the signal from the out-
door sensor, it automatically shows the corresponding channel . However, you can also manually set the display of the different channels . Press the control surface 4 repeatedly to switch between displays show channel 2),
(rotate between all channels in a loop) .
(only show channel 1),
(only show channel 3) and
(only Only the values from outdoor sensors that are connected to the weather station are shown. If you use multiple outdoor sensors, choose a different channel for each outdoor sensor. 22US - EN IB_314696_AHFL433B2_WeatherStation_LB9.indb 22 26.03.19 14:40 AHFL 433 B2 Troubleshooting Unable to connect to the outdoor sensor . There are interfering obstacles or other sources of interference, such as concrete walls or other wireless transmission devices between the weather station and the outdoor sensor . Move the device to another location and try again . The outdoor sensor is too far away from the weather station . Move the two components closer together . "Visual contact"
between the outdoor sensor and weather station often improves transmission . The batteries in the weather station or outdoor sensor are dead . Replace the batteries . Synchronization with WWVB signal not possible Disruptive obstacles or other interference sources, such as concrete walls or other radio transmission devices, are interfering with WWVB signal reception . Change the installation location (e .g . near a window) and try again . The batteries of the weather station are dead . Replace the batteries . US - EN23 IB_314696_AHFL433B2_WeatherStation_LB9.indb 23 26.03.19 14:40 AHFL 433 B2 Cleaning Ensure that no moisture penetrates into the device during cleaning to avoid irreparable damage to the device . Do not use caustic, abrasive or solvent-based cleaners . They can attack the surfaces of the device . Clean the surfaces of the device with a soft, dry cloth . For stubborn dirt, use a slightly damp cloth with a mild cleaning agent . Storage If you plan on not using the product for a long period, remove the batteries and store it in a clean, dry place away from direct sunlight . Disposal Disposal of device Electrical devices may not be thrown away as part of normal household trash . If you can no longer use your electrical device, dispose of it in accordance with the legal provisions applicable in your state . This will ensure that old electrical devices are re-
cycled and environmental pollution is kept to a minimum . Further information about disposal is available on the Internet at www .epa .gov . 24US - EN IB_314696_AHFL433B2_WeatherStation_LB9.indb 24 26.03.19 14:40 AHFL 433 B2 Disposal of batteries Some batteries contain heavy metals such as mercury, lead, cadmium, and nickel; therefore, many communities do not allow them to be thrown away with your regular trash . Recycling is always the best option for disposing of used batteries . Dry-Cell Batteries are used in a variety of electronics and include alkaline and carbon zinc (9-volt, D, C, AA, AAA), mercuric-oxide
(button, some cylindrical and rectangular), silver-oxide and zinc-
air (button), and lithium (9-volt, C, AA, coin, button, rechargeable) batteries . Look for in-store recycling bins or community collection events to dispose of these batteries . Disposal of the packaging The packaging materials have been selected for their environmental friendliness and ease of disposal, and are therefore recyclable . Dispose of packaging materials that are no longer needed in accordance with applicable local regulations . Note the marking on the different packaging materi-
als and separate them as necessary . The packaging materials are marked with abbreviations (a) and numbers (b) with the following meanings:
17: Plastics, 2022: Paper and cardboard, 8098: Composites . US - EN25 IB_314696_AHFL433B2_WeatherStation_LB9.indb 25 26.03.19 14:40 AHFL 433 B2 Appendix Technical specifications Weather station Voltage supply Temperature measurement range Temperature resolution Measuring range of humidity Humidity resolution Radio clock signal Outdoor sensor Voltage supply Temperature measurement range Measuring range of humidity Humidity resolution Transmission frequency Transmission strength Range Protection class 26US - EN
(DC) 3 x 1 .5 V
(Type AAA/LR03) 14 F to +122 F
(9 .9 C to +50 C) 0 .1 F (0 .1 C) 20 to 95%
1%
WWVB
(DC) 2 x 1 .5 V
(Type AAA/LR03) 40 F to +140 F
(40 C to +60 C) 20 to 95%
1%
433 MHz
< 10 dBm Max . 164 ft
(area free of obstructions) IPX4 (splash-proof) IB_314696_AHFL433B2_WeatherStation_LB9.indb 26 26.03.19 14:40 AHFL 433 B2 FCC Compliance Statement This device complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interfer-
ence that may cause undesired operation . CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment . NOTE: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to part 15 of the FCC rules . These limits are designed to provide reasonable protection against harmful interference in a residential installation . This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communi-
cations . However, there is no guarantee that interference will not occur in a particular installation . If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna .
- Increase the separation between the equipment and the receiver .
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected .
- Consult the dealer or an experienced radio/TV technician for help . US - EN27 IB_314696_AHFL433B2_WeatherStation_LB9.indb 27 26.03.19 14:40 AHFL 433 B2 3 year limited warranty What does this warranty cover?
The warranty covers:
Damage, breakage or inoperability due to defect . Damage not caused by normal wear and tear or failure to follow the safety and maintenance instructions provided in the user manual . What is not covered by the warranty?
The warranty does not cover damage caused by:
Normal wear and tear of the product, including fragile parts
(such as switches, glass, etc .);
Improper use or transport;
Disregarding safety and maintenance instructions;
Accidents or acts of nature (e .g . lightning, fire, water, etc .);
Tampering with the product (such as removing cover, unscrewing screws, etc .) Consequential and incidental damages are also not covered under this warranty . However, some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation or exclusion may not apply to you . 28US - EN IB_314696_AHFL433B2_WeatherStation_LB9.indb 28 26.03.19 14:40 AHFL 433 B2 What is the coverage period and warranty resolution?
The warranty is for 3 years from the date of purchase . At our discretion, the product will either be refunded or replaced . What will we not do?
We will not:
Start a new warranty period upon product exchange;
Repair the product . How to process the warranty?
To initiate, please:
Call customer service at 1 (844) 543-5872 Visit the customer service website at www .lidl .com/contact-us or Visit a LIDL store for further assistance To ensure the quickest warranty return process, please have the following available:
The original sales receipt that includes the purchase date;
The product and manual in the original package;
A statement of the problem . What must you do to keep the warranty in effect?
Retain the original receipt;
Follow all product instructions;
Do not repair or modify the product . US - EN29 IB_314696_AHFL433B2_WeatherStation_LB9.indb 29 26.03.19 14:40 AHFL 433 B2 How does state law relate to this warranty?
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state . All implied warranties are limited by the duration and terms of this warranty . Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you . Distributor LIDL US LLC . ARLINGTON VA 22202 FCC Suppliers Declaration of Conformity Hygrometer with ventilation recommendation -USA/
AHFL 433 B2,MBO-314696 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Suppliers Name: Lidl US, LLC Suppliers Address: 3500 S. Clark Street Arlington Virginia United States Internet contact information: www.lidl.com 30US - EN IB_314696_AHFL433B2_WeatherStation_LB9.indb 30 26.03.19 14:40 AHFL 433 B2
1 | Internal Photos | Internal Photos | 238.98 KiB | April 18 2019 |
Appendix Internal Photographs Internal View of EUT-1 Internal View of EUT-2 Page 2 of 3 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-4 Antenna Internal View of EUT-5 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. Page 3 of 3
1 | External Photos | External Photos | 149.29 KiB | April 18 2019 |
Appendix I External Photographs View of EUT-1 View of EUT-2 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. Page 2 of 2
1 | Label and Label Location | ID Label/Location Info | 578.32 KiB | April 18 2019 |
A H F L 4 3 3 B 2 I A N
:
3 1 4 6 9 6 M a n u f a c t u r e d
:
2 0 1 9
-
0 5 F C C I D
:
2 A J 9 O
-
A H F L 4 3 3 B 2 W a r n n g
:
i i n c l u d n g i i n t e r f e r e n c e t h a t m a y c a u s e u n d e s i r e d o p e r a t i o n
. T h i s d e v i c e c o m p l i e s w i t h P a r t 1 5 o f t h e F C C R u l e s
. O p e r a t i o n j i s s u b e c t t o t h e f o l l o w n g t i w o c o n d i t i o n s
:
(
1
) t h i s d e v i c e m a y n o t c a u s e h a r m f u l i n t e r f e r e n c e
, a n d
(
2
) t h i s d e v i c e m u s t a c c e p t a n y i n t e r f e r e n c e r e c e i v e d
, AHFL 433 B2 FCC ID: 2AJ9O-AHFL433B2 Manufactured: 2019-05 IAN: 314696 8 mm Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 8 mm 68 mm SIZE: 68 x 8 mm 68 mm SIZE: 68 x 8 mm
1 | Authorization Letter | Cover Letter(s) | 1.61 MiB | April 18 2019 |
Putian Yijia Electronic Co., Ltd. Date: 2019/2/26 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern:
I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to:
a) comply with the relevant provisions of the certification program;
b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;
Cc) make claims regarding certification only in respect of the scope for which certification has been granted;
d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;
e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;
f) use certification only to indicate the products are certified as being in conformity with specified standards;
g) h) j) k) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;
ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;
keep a record of all complaints made known to us relating to the products compliance with requirements of the relevant standard and to make these records available to the when requested;
take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;
document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Contact Rene! oe y Title of Person : QA manager Address: The west of Lihan Avenue Hanjiang District,Putian,Fujian,China
1 | Confidentiality Letter | Cover Letter(s) | 630.24 KiB | April 18 2019 |
Putian Yijia Electronic Co., Ltd. Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID:2AJ90-AHFL433B2 To Whom It May Concern:
Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Company NamedPytian e Contact Name: QirtsZheng(Maggie Title of Person: QA manager Address: The west of Lihan Avenue Hanjiang District,Putian,Fujian,China Date: April 10, 2019
1 | Declaration Letter for Model different | Cover Letter(s) | 560.43 KiB | April 18 2019 |
Putian Yijia Electronic Co., Ltd. Address: The west of Lihan Avenue Hanjiang District,Putian,Fujian,China Confirmation Letter We, Lid! US, LLC The product: Hygrometer with ventilation recommendation -USA And model No.: AHFL 433 B2 MBO-314696 have the same technical construction including circuit diagram, PCB Layout, components and component layout, all electrical construction and mechanical construction with AHFL 433 B2.The difference lies only the model number.
1 | Power of Attorney Letter | Cover Letter(s) | 41.86 KiB | April 18 2019 |
Lidl US, LLC Lidl US IAN: 314696 Date: 2019/4/16 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject:
Authorization of Handling FCC Application for FCC ID: 2AJ90-AHFL433B2 To Whom It May Concern:
I, Maxwell my behalf Hand of Lidl us, LLC hereby on the related appoint used for application of documents
:
Qing Zheng of Putian Yijia Electronic Co., Ltd. to sign on FCC ID :2AJ90-AHFL433B2. Best Regards, Company Name: Lidl us, LLC Contact Name: Maxwell Hand Title of Person : Senior QA Manager Address:
3500S Cla Street, Arlington, VA 22202 United States
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2019-04-18 | 433.92 ~ 433.92 | DSC - Part 15 Security/Remote Control Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2019-04-18
|
||||
1 | Applicant's complete, legal business name |
Lidl US, LLC
|
||||
1 | FCC Registration Number (FRN) |
0026005694
|
||||
1 | Physical Address |
3500 S. Clark Street
|
||||
1 |
Arlington, Virginia 22202
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
L******@ul.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2AJ9O
|
||||
1 | Equipment Product Code |
AHFL433B2
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
M**** H********
|
||||
1 | Title |
Sr. Manager Quality Assurance
|
||||
1 | Telephone Number |
703-5********
|
||||
1 | Fax Number |
703-8********
|
||||
1 |
m******@lidl.us
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSC - Part 15 Security/Remote Control Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Hygrometer with ventilation recommendation -USA | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
UL Verification Services (Guangzhou) Co., Ltd.
|
||||
1 | Name |
S******** G********
|
||||
1 | Telephone Number |
+86 0********
|
||||
1 |
S******@ul.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15.231 | 433.92000000 | 433.92000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC