FCC ID: 2AJ9O-HG06618 QI Dual charging adapter

Distributed by / Distribuido por:

LIDL US, LLC, Arlington, VA 22202 Model No. / Modelo Nm.:

HG06618A-US/ HG06618B-US Version / Versin: 07/2020 Made in / Hecho en: China QI DUAL WIRELESS CHARGING PAD/

ALMOHADILLA DE CARGA INALMBRICA DOBLE QI SDQWC A2 QI DUAL WIRELESS CHARGING PAD Operation and Safety Notes ALMOHADILLA DE CARGA INALMBRICA DOBLE QI Instrucciones de utilizacin y de seguridad IAN 351292_2001 IAN 351292_2001 US-EN Operation and Safety Notes US-ES Instrucciones de utilizacin y de seguridad Page 3 Pgina 27 Description of signal words .......... Page 4 Customer service ............................... Page 5 Introduction ......................................... Page 5 Intended use ........................................ Page 6 Trademark notices ............................ Page 6 Important safety instructions...... Page 7 Description of parts ......................... Page 14 Technical data .................................... Page 14 Scope of delivery .............................. Page 17 Before use ............................................ Page 17 Operation ............................................. Page 17 Troubleshooting ................................. Page 21 Storage when not in use ................ Page 22 Cleaning ................................................ Page 22 Disposal ................................................. Page 23 Three year limited warranty ........ Page 23 US-EN 3 DESCRIPTION OF SIGNAL WORDS WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury. CAUTION indicates a hazardous situation that, if not avoided, could result in minor or moderate injury. NOTICE indicates information considered important, but not hazard related (e.g. messages related to property damage). 4 US-EN CUSTOMER SERVICE Call customer service at 1 (844) 543-5872 Visit the Website Customer Service Platform at www.lidl.com/contact-us Visit a LIDL store for further assistance. Please have your IAN number ready. IAN 351292_2001 QI DUAL WIRELESS CHARGING PAD P Introduction Congratulations on your purchase. You have selected a quality product. The instructions for use are a part of the product. They contain important information about the safety, use and disposal of the product. Before using the product, please learn about all the safety information and usage instructions. Only use the product as described and for the specified applications. If you lend the product to someone else, please also give all the instructions. US-EN 5 P Intended use The QI DUAL WIRELESS CHARGING PAD

(hereinafter referred to as the Product) is an information electronics device. This product is only for charging mobile devices that use Qi technology. Other devices cannot be charged with the product. The product is intended for private use only and not for commercial use. The manufacturer accepts no liability for damage resulting from unauthorised modifications or improper use. P Trademark notices USB is a registered trademark of USB Implementers Forum, Inc. Qi and the Qi logo mark are trademark of the Wireless Power Consortium (WPC). The SilverCrest trademark and trade name is the property of their respective owners. Any other names and products are trademarks or registered trademarks of their respective owners. 6 US-EN IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS. KEEP FOR FUTURE REFERENCE. INCLUDE ALL DOCUMENTATION WHEN PASSING THIS PRODUCT ON TO OTHERS. DANGER TO LIFE AND RISK OF ACCIDENT FOR INFANTS AND CHILDREN!

Risk of suffocation!

Never leave children unsupervised with the packaging material. The packaging materials pose a suffocation hazard. Children frequently underestimate the dangers. The packaging materials are not a toy. This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety. Children should be US-EN 7 supervised to ensure that they do not play with the product. Risk of property damage This product does not contain any parts which can be serviced by the user. Keep the product away from moisture, dripping and splashing water!

Do not place burning candles or other open fire on or next to the product. Check the product before every use!

Discontinue use if any damage to the product or the charging cable is detected!

If you notice smoke or an unusual noise or odor, unplug the product immediately and remove the USB cable. Sudden temperature changes may cause condensation inside the product. In this case, allow the product to acclimatise for some time before using it again to prevent short circuits!

Do not operate the product near heat sources, e.g. radiators or other devices emitting heat!

8 US-EN Do not try to open the product! It has no internal parts requiring maintenance. Radio interference Never use the product on airplanes, in hospitals, service rooms, or near medical electronic systems. The wireless signals transmitted could impact the functionality of sensitive electronics. Keep the product at least 0.65 ft / 20 cm from pacemakers or implantable cardioverter-

defibrillators, as the electromagnetic radiation may impair the functionality of pacemakers. The radio waves transmitted could cause interference in hearing aids. Do not place the product near flammable gases or potentially explosive areas (e.g. paint shops) with the wireless components on, as the radio waves emitted can cause explosions and fire. The range of the radio waves varies by environmental conditions. In the event of wireless data transmission, unauthorized third parties receiving the data cannot be excluded. US-EN 9 Lidl US, LLC is not responsible for interference with radios or televisions due to unauthorized modification of the product. Lidl US, LLC further assumes no liability for using or replacing cables and products not distributed by Lidl US/

LLC. The user of the product id fully responsible for correcting interference caused by such unauthorized modification to the product, as well as replacement of such products. Ensure that:

no direct heat sources (e.g. heating) can affect the product is not exposed to bright artificial the product light any contact with splashed and dripping water and corrosive liquids is avoided and the product are not operated in the vicinity of water. In particular, the product should never be submerged in liquid; do not place any vessels filled with liquid, for example, vases or drinks, on or near the product the product is not used in the immediate vicinity of magnetic fields (e.g. speakers) no fire sources (e.g.burning candles) are placed on or near the product 10 US-EN no foreign objects penetrate the product the product is never subjected to extreme temperature fluctuations as this could result in condensation and electrical short circuits. If the product were subjected to extreme temperature fluctuations, however, wait (2 hours) until the product has reached ambient temperature before use the product is never subjected to excessive shocks and vibrations the connected cables are always laid in such a manner that nobody can step on or trip over them. There is a risk of injury no objects are placed on a connected cable and cables are not connected over sharp edges because this could otherwise damage the functionality of sensitive electronics. Changes or modification to this product not expressly approved by the party responsible for compliance could void the users authority to operate the product. US-EN 11 This product has been tested and complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product causes harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the product and receiver. Connect the equipment to an outlet on a different circuit than the one the receiver is connected to. Consult the dealer or an experienced radio /

TV technician for help. 12 US-EN This product complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This product may not cause harmful interference, and (2) this product must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. SAVE THESE INSTRUCTIONS US-EN 13 P Description of parts 1 Qi Charging area 1 2 LED indicator 1 3 LED indicator 2 4 Qi Charging area 2 5 USB type C input socket 6 USB type A plug 7 USB charging cable 8 USB type C plug 9 Instructions for use P Technical data Dimensions:

7.09 in x 3.35 in x 0.32 in

(180 mm x 85 mm x 8 mm) Weight:

4.59 oz/ 0.29 lb (130 g) Operating temperature: 41 95 F (5 35 C) Storage temperature: 32 113 F (0 45 C) Humidity

(no condensation):

USB charging cable length:

3.28 ft. (1 m) 10 70 %

14 US-EN 1 2 3 4 5 6 7 8 9 US-EN 15 Input:

Output:

OR Input:

Output:

Total power:

Frequency band:

Transmitted maximum radio frequency power

(H-field):

Wireless charging distance:

/ 3 A 5 V 2 x 5W max. 3 A /

9 V 2.25 A /

12 V 2 A 15 V 2 x 10 W max. 20 W max.*

111.38-128.21 kHz

-0.66 dBuA/m at 10m distance 0.2 in ( 5 mm) Please use a USB charging cable type C to type C and a charger with 30 W output for 20 W output power. Both accessories are not included. (Only USB charging cable type A to type C is included.) The specification and design may be changed without notification. 16 US-EN P Scope of delivery 1 Qi dual wireless charging pad 1 USB charging cable 1 Instructions for use P Before use Before use, verify the package contents are complete and undamaged!

All parts have to be unpacked and the packaging material has to be removed completely. If you notice any damage or missing parts, contact the dealer who sold this product. P Operation ATTENTION! The product must not be charged at a PC or notebook due to the high power consumption. The product only supports devices with Qi wireless technology. US-EN 17 Charge your device 1. Plug the USB type A plug 6 of the USB charging cable 7 into the USB port on a suitable USB adapter (not included) and plug the USB type C plug 8 into USB type C input socket 5 of the product. 2. Plug the USB adapter (not included) into an easily accessible mains socket. 3. Place the mobile device on the Qi charging surface 1 1 or 2 4 . Make sure the center of the device is aligned over the center of the Qi charging surface. Charging will begin on contact. The LED indicator 1 2 lights up blue 18 US-EN when charging is active on Qi charging surface 1 1 . The LED indicator 2 3 lights up blue when charging is active on Qi charging surface 2 4 . You can charge up to two Qi enabled mobile devices at the same time. Place your mobile devices on the Qi charging surfaces as shown in the sketch, the maximum wireless charging power is 10 W each. Protective covers that protect the mobile device may interfere with the charging process. In this case, the mobile device must be removed from the protective cover. US-EN 19 The user may not see LEDs 2 / 3 during the charging process depending on the used mobile device. Please use a USB charging cable type C to type C and a charger with 30 W output for 20 W output power. Both accessories are not included. (Only USB charging cable type A to type C is included.) LED indicators 2 / 3 status The product has two LEDs that indicates its operational status:

Status Starting process

(Boot phase) /

Standby Off Charging Fault condition Full Charge LED indicator White light LED off Blue light Blue light flashing Green light 20 US-EN P Troubleshooting What should I do if the LED indicator of the product is not lit during starting process (Boot phase)?

Check the USB cable connection between USB adapter (not included) and the product. The USB cable must be firmly connected. Check the connection between the mains socket and the USB adapter (not included). Alternatively, the user must try another mains socket. What should I do if the mobile device does not get charging ?

Check that the mobile device have Qi wireless charging technology. Check the mobile device is placed horizontally on the center position of the charging pad. Check that no foreign object blocking the charging. Check whether the mobile device is removed from the protective cover. What should I do if the LED indicator flashes blue?

This indicates a fault condition occurred. US-EN 21 Disconnect the USB connection immediately. Check that no foreign object blocking the charging. Let the product cool down for a while and try to use it again. P Storage when not in use Store the product in a dry interior, away from direct sunlight, preferably in its original packaging. P Cleaning This product has no internal parts requiring maintenance. Moisture entering the product may result in damage. Ensure no moisture enters the product during cleaning to prevent damaging the product beyond repair. Do not use abrasive, solvent-based or aggressive cleaners. These can damage the surface of the product. Only clean the product with a slightly damp cloth and mild washing-up liquid. 22 US-EN P Disposal Dispose of the packaging through your local recycling facilities and in compliance with all federal, state and local regulations. b a Please note the package markings regarding waste separation, indicated by abbreviations (a) and numbers (b), meaning: 17: plastics / 2022: paper and cardboard / 8098: composite materials. Contact your local waste management authority for additional information on how to dispose of the used product. To help protect the environment, please dispose of the product properly when it has reached the end of its useful life, do not throw in the garbage. Information on collection sites and their opening hours is available from your local authority. P Three year limited warranty What does this warranty cover?

The warranty covers:

Damage, breakage or inoperability due to defect. Damage not caused by normal wear and tear or failure to follow the safety and maintenance instructions provided in the user manual. US-EN 23 What is not covered by the warranty?

The warranty does not cover damage caused by:

Normal wear and tear of the product, including fragile parts (such as switches, glass, etc.);

Improper use or transport;

Disregarding safety and maintenance Accidents or acts of nature (e.g. lightning, fire, Tampering with the product (such as removing instructions;

water, etc.);

cover, unscrewing screws etc.) Consequential and incidental damages are also not covered under this warranty. However, some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation or exclusion may not apply to you. What is the period of coverage and warranty resolution?

The warranty is for 3 years from the date of purchase. At our discretion, product will either be refunded or replaced. 24 US-EN What will we not do?

We will not:

Start a new warranty period upon product exchange;

Repair product. How to process the warranty?

To initiate, please:

Call customer service at 1 (844) 543-5872 Visit the Website Customer Service Platform at www.lidl.com/contact-us or Visit a LIDL store for further assistance To ensure the quickest warranty return process, please have the following available:

The original sales receipt that includes the date purchased;

The product and manual in the original package;

A statement of the problem. What must you do to keep the warranty in effect?

Retain the original receipt;

Follow all product instructions;

Do not repair or modify the product. US-EN 25 How does state law relate to this warranty?

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. All implied warranties are limited by the duration and terms of this warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. 26 US-EN Descripcin de las palabras de advertencia ............................... Pgina 28 Servicio al cliente .......................... Pgina 29 Introduccin ..................................... Pgina 29 Uso previsto ..................................... Pgina 30 Avisos de marcas comerciales ...................................... Pgina 30 Instrucciones importantes de seguridad ................................... Pgina 31 Descripcin de las partes .......... Pgina 38 Datos tcnicos ................................. Pgina 38 Contenido ......................................... Pgina 41 Antes del uso ................................... Pgina 41 Funcionamiento .............................. Pgina 41 Resolucin de problemas ........... Pgina 45 Almacenamiento cuando no est en uso ................................. Pgina 46 Limpieza ............................................ Pgina 46 Eliminacin ....................................... Pgina 47 Garanta limitada de 3 aos .... Pgina 48 US-ES 27 DESCRIPCIN DE LAS PALABRAS DE ADVERTENCIA ADVERTENCIA indica una situacin peligrosa, que puede provocar la muerte o lesiones graves si no se evita. PRECAUCIN indica una situacin peligrosa, que puede provocar lesiones leves o moderadas si no se evita. AVISO indica informacin que se considera importante, pero que no implica un peligro

(p. ej. mensajes relacionados con daos materiales). 28 US-ES SERVICIO AL CLIENTE Comunquese con el servicio de atencin al cliente a 1 (844) 543-5872 Visite el portal de atencin al cliente en www.lidl.com/contact-us Visite una de nuestras tiendas LIDL en caso de cualquier inquietud. Por favor tenga su nmero IAN a la mano IAN 351292_2001 ALMOHADILLA DE CARGA INALMBRICA DOBLE QI P Introduccin Felicidades por la compra de su nuevo producto. Usted ha seleccionado un producto de calidad. Las instrucciones de uso son parte del producto. Contienen informacin importante respecto a la seguridad, el uso y la eliminacin. Antes de usar el producto, familiarcese con toda la informacin de seguridad y las instrucciones de uso. Utilice la unidad nicamente como se describe y para las aplicaciones indicadas. Si traspasa el producto a alguien ms, por favor asegrese de incluir toda la documentacin con l. US-ES 29 P Uso previsto Este ALMOHADILLA DE CARGA INALMBRICA DOBLE QI (en adelante, denominado producto) es un dispositivo electrnico de informacin. Este producto solo puede utilizarse para cargar dispositivos mviles que cuenten con tecnologa Qi. No se puede cargar otros tipos de dispositivos con este producto. Este producto est diseado solo para el uso domstico privado y no para fines comerciales. El fabricante rechaza toda responsabilidad por daos derivados de modificaciones no autorizadas o del uso inapropiado. P Avisos de marcas comerciales USB es una marca comercial registrada de USB Implementers Forum, Inc. Qi y el logotipo de Qi son marcas comerciales del Wireless Power Consortium

(WPC). La marca comercial y el nombre comercial de SilverCrest es propiedad de sus respectivos dueos. Cualquier otro nombre y producto podra ser una marca comercial o marca comercial registrada de sus respectivos dueos. 30 US-ES INSTRUCCIONES IMPORTANTES DE SEGURIDAD LEA TODAS LAS INSTRUCCIONES. CONSERVE PARA FUTURAS REFERENCIAS. AL CEDER ESTE PRODUCTO A TERCEROS, ASEGRESE DE INCLUIR TODA SU DOCUMENTACIN. PELIGRO DE MUERTE O ACCIDENTE PARA BEBS Y NIOS!

Riesgo de asfixia!

Nunca deje a un nio sin supervisin con el material de embalaje. El material de embalaje representa un peligro de asfixia. Con frecuencia, los nios subestiman los peligros. El material de embalaje no es un juguete. Este producto no est diseado para ser usado por personas (incluyendo nios) con capacidades fsicas, sensoriales o mentales reducidas o con falta de experiencia y conocimiento, a menos de que sean supervisadas o instruidas respecto al uso del producto por una persona responsable por su seguridad. Siempre se US-ES 31 deber supervisar a los nios para asegurarse de que no jueguen con el producto. Riesgo de daos materiales Este producto no contiene ninguna pieza que el usuario pueda reparar. Mantenga el producto alejado de la humedad, de goteras y de salpicaduras de agua!

No coloque velas encendidas u otra llama expuesta sobre o cerca del producto. Inspeccione cuidadosamente el producto antes de cada uso. Deje de utilizar el producto si se detecta algn dao al producto o al cable de conexin. Si advierte la presencia de humo o percibe un ruido o un olor inusual, desconecte de inmediato la conexin USB. Los cambios repentinos de temperatura pueden provocar condensacin en el interior del producto. En este caso, espere a que el producto se aclimate durante un tiempo prudencial antes de utilizarlo. De esta forma, se evitarn cortocircuitos. No utilice el producto cerca de fuentes de calor, como radiadores u otros productos que emanen calor. 32 US-ES No intente abrir el producto! No existen piezas internas que requieran mantenimiento. Interferencia de radio Nunca utilice el producto en el interior de aviones, de hospitales, de salas de servicios mdicos o cerca de sistemas mdicos electrnicos. Las seales inalmbricas transmitidas podran afectar la funcionalidad de componentes electrnicos sensibles. Mantenga el producto a como mnimo 0.65 ft / 20 cm de marcapasos o desfibriladores cardioversores implantables, ya que la radiacin electromagntica podra afectar el funcionamiento de los marcapasos. Las ondas de radio transmitidas podran provocar interferencias en aparatos auditivos. No coloque el producto cerca de gases inflamables o reas potencialmente explosivas

(por ejemplo, pintureras) con los componentes inalmbricos activados, ya que las ondas de radio emitidas podran provocar explosiones e incendios. US-ES 33 El rango de las ondas de radio vara segn las condiciones ambientales. En el caso de la transmisin de datos inalmbrica, no se puede excluir la recepcin de datos por parte de terceros no autorizados. Lidl US, LLC no es responsable de interferencias con radios o televisores debido a una modificacin no autorizada del producto. Lidl US, LLC no asume ninguna responsabilidad por el uso o reemplazo de cables y productos no distribuidos por Lidl US, LLC. El usuario del producto es totalmente responsable de corregir la interferencia causada por dicha modificacin no autorizada del producto, as como del reemplazo de dichos productos. Asegrese de que:

ninguna fuente de calor directa (por ejemplo, calefaccin) pueda afectar al producto el producto no est expuesto a luz artificial brillante se evite cualquier contado con salpicaduras y goteos de agua y con lquidos corrosivos y que el producto no se utilice cerca de agua. En particular, nunca se deber sumergir el 34 US-ES producto en lquidos; no coloque ningn recipiente con lquido, como jarrones o vasos, sobre o cerca del producto el producto no se utilice cerca de campos magnticos (por ejemplo, altavoces) no se coloque fuentes de calor (por ejemplo, velas encendidas) sobre o cerca del producto ningn objeto extrao penetre el producto el producto nunca se someta a fluctuaciones extremas de temperatura ya que esto podra resultar en condensacin y cortocircuitos elctricos. Sin embargo, si el producto se somete a fluctuaciones extremas de temperatura, espere (2horas) antes de usarlo, hasta que el producto haya alcanzado la temperatura ambiente el producto nunca se someta a vibraciones o impactos excesivos los cables conectados siempre se coloquen de tal manera que ninguna persona pueda pisarlos o tropezar con ellos. Existe el riesgo de sufrir lesiones no se coloquen objetos sobre un cable conectado y que los cables no se conecten sobre bordes filosos, ya que esto podra daar la funcionalidad de los delicados componentes electrnicos. US-ES 35 Los cambios o las modificaciones a este producto que no sean expresamente aprobados por la parte responsable del cumplimiento podran anular la autoridad del usuario a operar el producto. Este producto ha sido probado y cumple con los lmites para un dispositivo digital clase B, de acuerdo con el apartado 15 de las normas de la FCC. Estos lmites estn diseados para proveer proteccin razonable contra interferencias perjudiciales en una instalacin residencial. Este producto genera, usa y puede emitir energa de radiofrecuencia y en caso de no ser instalado y utilizado de acuerdo a las instrucciones puede causar interferencias perjudiciales a las radiocomunicaciones. Sin embargo, no existe ninguna garanta de que no se produzcan interferencias en una instalacin en particular. Si este producto causa una interferencia daina a la recepcin de radio o televisin, la cual puede ser determinada encendiendo y apagando el producto, se alienta al usuario a intentar corregir las interferencias 36 US-ES siguiendo las siguientes medidas:

Oriente o localice de nuevo la antena receptora. Aumente la separacin ente el producto y el receptor. Conecte el producto a la toma de corriente en un circuito distinto de aquel al que est conectado el receptor. Consulte a su proveedor o a algn tcnico experto de radio / TV. Este producto cumple con la parte 15 del reglamento FCC. La operacin est sujeta a las siguientes dos condiciones: (1) Este dispositivo puede que no cause interferencia daina, y

(2) este dispositivo debe aceptar cualquier interferencia recibida, incluyendo interferencia que pueda causar una operacin no deseada. Este equipo cumple con los lmites de exposicin de la FCC establecidos para un entorno sin control. Se deber instalar y utilizar el equipo a una distancia de20 cm como mnimo entre el radiador y el cuerpo. No se deber colocar ni utilizar este transmisor junto con cualquier otra antena o transmisor. GUARDE ESTAS INSTRUCCIONES US-ES 37 P Descripcin de las partes 1 Superficie de carga Qi 1 2 Indicador LED 1 3 Indicador LED 2 4 Superficie de carga Qi 2 5 Toma de entrada de USB tipoC 6 Conector USB tipo A 7 Cable de carga USB 8 Conector USB tipoC 9 Instrucciones de uso P Datos tcnicos Dimensiones:

Peso:

Temperatura de funcionamiento:

Temperatura de almacenamiento:

Humedad

(sin condensacin):

Longitud del cable de carga USB:

38 US-ES 7.09 in x 3.35 in x 0.32 in

(180 mm x 85 mm x 8 mm) 4.59 oz/ 0.29 lb (130 g) 41 95 F (5 35 C) 32 113 F (0 45 C) 10 70 %

3.28 ft. (1 m) 1 2 3 4 5 6 7 8 9 US-ES 39

/ 3 A 5 V mx. 2 x 5W 3 A /

9 V 2.25 A /

12 V 2 A 15 V mx. 2 x 10 W mx. 20 W*

111.38-128.21kHz Entrada:

Salida:

o Entrada:

Salida:

Consumo total:

Potencia de carga inalmbrica:

Potencia de la frecuencia (campo H) de radio mxima transmitida:

-0.66 dBuA/m a una distancia de 10m Distancia de carga inalmbrica:

0.2 in ( 5 mm) Debe utilizar un cable de carga USB tipo C para tipoC y un cargador con 30 W de salida para una potencia de salida de 20 W. No se incluye ninguno de los dos accesorios. (Solo se incluye un cable de carga USB tipoA para un tipoC). 40 US-ES Las especificaciones y el diseo pueden variar sin previo aviso. P Contenido 1 Almohadilla de carga inalmbrica doble Qi 1 Cable de carga USB 1 Conjunto de instrucciones de funcionamiento P Antes del uso Antes del uso, verifique el contenido de embalaje est completo y sin daos. Se debern desembalar todas las piezas y se deber extraer por completo el material de embalaje. Si advierte algn dao o pieza faltante, comunquese con el distribuidor que le vendi el producto. P Funcionamiento ATENCIN! No debe cargar el producto en una PC o computadora porttil debido al alto consumo de energa. US-ES 41 Este producto soporta solo los dispositivos que cuentan con tecnologa Qi inalmbrica. Cargue su dispositivo 1. Conecte el conector USB tipoA 6 del cable de carga USB 7 en el puerto USB en un adaptador USB adecuado (no incluido) y conecte el conector USB tipoC 8 en la toma de entrada de USB tipoC 5 del producto. 2. Inserte el adaptador USB (no incluido) en un tomacorriente de acceso simple. 3. Coloque el dispositivo mvil en la superficie de carga Qi1 1 o 2 4 . Asegrese de que el centro del dispositivo se encuentre alineado 42 US-ES sobre el centro de la superficie de carga Qi. La carga iniciar cuando ambos entren en contacto. El indicador LED 1 2 emite una luz azul cuando se est cargando en la superficie de carga Qi 1 1 . El indicador LED 2 3 emite una luz azul cuando se est cargando en la superficie de carga Qi 2 4 . Puede cargar hasta dos dispositivos mviles habilitados para Qi al mismo tiempo. Coloque los dispositivos mviles en las superficies de carga Qi como se muestra en el dibujo; la potencia de carga inalmbrica mxima es de 10 W para cada uno. US-ES 43 Las fundas que protegen los dispositivos mviles pueden interferir con el proceso de carga. En ese caso, deber quitar la funda protectora del dispositivo. Dependiendo del dispositivo mvil que se emplee, es posible que el usuario no pueda ver el indicador LED 2 / 3 durante el proceso de carga. Debe utilizar un cable de carga USB tipo C para tipoC y un cargador con 30 W de salida para una potencia de salida de 20 W. No se incluye ninguno de los dos accesorios. (Solo se incluye un cable de carga USB tipoA para un tipoC). Estado de los indicadores LED 2 / 3 Este producto cuenta con dos luces LED que indican su estado operativo:

Indicador LED Estado Luz blanca Proceso de inicio

(fase de arranque)/

Espera LED apagado Apagada 44 US-ES Indicador LED Luz azul Estado Cargando Luz azul parpadeante Situacin de falla Luz verde Carga completa P Resolucin de problemas Qu debo hacer si el indicador LED del producto no se enciende durante el proceso de inicio (fase de arranque)?

Verifique la conexin del cable USB entre el adaptador USB (no incluido) y el producto. El cable USB debe estar firmemente conectado. Verifique la conexin entre el tomacorriente elctrico y el adaptador USB (no incluido). Otra opcin es que el usuario pruebe otro tomacorriente. Qu debo hacer si el dispositivo mvil no se carga?

Verifique que el dispositivo mvil cuente con tecnologa de carga Qi inalmbrica. Verifique que el dispositivo mvil se encuentre en posicin horizontal sobre el centro de la superficie de carga. US-ES 45 Verifique que no haya ningn objeto extrao bloqueando la carga. Verifique que se haya retirado la funda protectora del dispositivo mvil. Qu debo hacer si el indicador LED parpadea con luz azul?

Esto indica que ocurri una falla. Desconecte la conexin USB inmediatamente. Verifique que no haya ningn objeto extrao bloqueando la carga. Deje que el producto se enfre por un rato e intente utilizarlo nuevamente. P Almacenamiento cuando no est en uso Almacene el producto en un lugar interior seco y protegido de la luz solar directa, preferiblemente en su embalaje original. P Limpieza Este producto no posee piezas internas que requieran mantenimiento. El ingreso de humedad en el producto puede provocar daos. 46 US-ES Asegrese de que no ingrese humedad en el producto durante la limpieza a fin de evitar que se produzcan daos irreparables al producto. No utilice limpiadores abrasivos, a base de disolventes o agresivos. Estos limpiadores pueden daar la superficie del producto. Solo realice la limpieza del producto con un pao ligeramente humedecido y detergente lquido neutro. P Eliminacin Deshgase del empaque mediante sus instalaciones de reciclaje locales y de acuerdo con las regulaciones federales, estatales y locales. b a Observe las seales del material de empaque para la separacin de residuos, los cuales estn sealados con abreviaturas (a) y nmeros (b) que significan lo siguiente: 17: plsticos / 2022:

papel y tablero de fibra / 8098: materiales mixtos. Contacte a las autoridades locales correspondientes para la eliminacin de desechos para mayor informacin sobre cmo desechar su producto desgastado. US-ES 47 Para ayudar a proteger el medio ambiente, elimine el producto adecuadamente al final de su vida til, no lo tire en la basura normal. Puede obtener informacin de sus autoridades locales sobre los puntos de recoleccin y horarios de atencin. La eliminacin inadecuada de las bateras puede causar daos ambientales!

Las bateras no deben ser eliminadas con los desechos del hogar. stas pueden contener metales pesados txicos y requieren ser tratadas como desechos especiales. Los smbolos qumicos de los metales pesados son: Cd = Cadmio, HG = Mercurio, Pb = Plomo. Por esta razn es importante eliminar las bateras usadas en un punto de recoleccin local. P Garanta limitada de 3 aos Lo que cubre la presente garanta La garanta incluye:

Daos, quebraduras o incapacidad para funcionar debido a defectos. Daos que no hayan sido causados por el desgaste propio del uso o por no seguir las instrucciones de seguridad y mantencin incluidas en el manual para el usuario. 48 US-ES Lo que no cubre esta garanta La garanta no cubre daos causados por:

El desgaste propio del uso del producto, incluidas las partes frgiles (como interruptores, piezas de vidrio, etc.). Uso o transporte no indicado del producto. Desatencin a las instrucciones de seguridad y mantencin. Accidentes o causas de fuerza mayor (e.g. relmpagos, incendio, inundacin, etc.). Manipulacin mal intencionada del producto

(retirar la cubierta, tornillos, etc.). La presente garanta tampoco cubre daos indirectos o emergentes. Sin embargo algunos estados no permiten la exclusin o limitacin de daos indirectos o emergentes, por lo que dicha exclusin o limitacin pudiera no aplicarse en su caso. Perodo de cobertura y resolucin de la garanta La garanta es vlida por 3 aos a partir de la fecha de compra. La empresa, segn lo estime conveniente, devolver el dinero o repondr el producto. US-ES 49 La empresa no:

Dar inicio a un nuevo perodo de garanta al hacerse el cambio del producto. Reparar el producto. Cmo se tramita la garanta?

Recomendamos que primero usted:

Llame al Servicio de atencin al cliente al 1

(844) 543-5872. Visite el Portal de atencin al cliente en www. lidl.com/contact-us Visite una de nuestras tiendas LIDL en caso de cualquier inquietud. A fin de acelerar el trmite de la garanta, tenga a bien contar con lo siguiente:

Recibo de venta original que incluya la fecha de compra. Producto y manual en su empaque original. Descripcin del problema. Qu debe hacer usted para mantener la garanta vigente?

Guardar el recibo original. 50 US-ES Seguir todas las instrucciones para el uso del No realizar ninguna reparacin ni alteracin al producto. producto. De qu manera influyen las leyes estatales con esta garanta?

La presente garanta le otorga derechos legales especficos, y pudiera usted contar con otros derechos los cuales varan de un estado a otro. Todas las garantas implcitas se encuentran limitadas a la duracin y trminos de la presente garanta. Algunos estados no permiten limitaciones al perodo de tiempo y trminos de la garanta implcita, por lo que dichas limitaciones pudieran no aplicarse en su caso. US-ES 51

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name LIDL US LLC 3500 S Clark Street, ARLINGTON VA 22202, USA Address Grantee Code FCC ID Contact Email Contact Phone Authorized Contact Name 2AJ9O 2AJ9O-HG06618 Mr. Maxwell Hand maxwell.hand@lidl.us

+1 (703) 819 3936 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature:

Print Name:

Title:

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Date:

a) b) c) d) e) f) g) Applicant Declaration Rev:0.0

LIDL US LLC TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Confidentiality Request regarding application for FCC ID: 2AJ9O-HG06618 Regarding:

LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Maxwell Hand Signature:

On behalf of Company: Lidl US, LLC Telephone: 703-819-3936 E-mail: Maxwell.hand@lidl.us Elizabeth Sullivan QA Manager 6/23/2020 Title: Sr QA Mgr

LIDL US LLC Cover Letter-Wireless Charger Approval Date: 2020-06-12 Gentlemen:

Theres a QI Dual charging adapter that would like to have your authorization as an Inductive wireless power transfer applications approval. The specific product as below, QI Dual charging adapter, with its designed features and specified description, meets special requirements for KDB 680106 D01 section 5.2 requirements. Company:

Product Name:

Model Number:

FCC ID:

KDB 680106 D01 Section 5.2 Requirements a) Power transfer frequency is less that 1 MHz Product Technical Specification 111.38kHz to 128.21kHz HG06618A-US,HG06618B-US QI Dual charging adapter 2AJ9O-HG06618 LIDL US LLC 5W; 7.5W; 10W b) Output power from each primary coil is less than or equal to 15 watts. c) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils d) Client device is placed directly in contact with the transmitter. e) Mobile exposure conditions only f) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Sincerely, Print Name: Maxwell Hand Signature:

On behalf of Company:

Telephone:

E-mail:

Elizabeth Sullivan QA Manager 6/23/2020 For inductive applications where the primary does not physically attach to the client, and it is intended for desktop use, the desktop guidance in KDB 680106 D01 may be applied Please refer to RF exposure report Title: Sr QA Mgr, Lidl US, LLC Result Complied Complied Complied Complied Complied Complied

LIDL US LLC Date: 12-Jun, 2020 TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: 2AJ9O-HG06618 To whom it may concern:

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Keny Xu in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with LIDL US LLC This authorization is valid until further written notice from the applicant. Print Name: Maxwell Hand Signature:

On behalf of Company: Lidl US, LLC Telephone: 703-819-3936 E-mail: maxwell.hand@lidl.us Elizabeth Sullivan QA Manager 6/23/2020 Title: Sr QA Mgr