FCC ID: 2AJ9O-HG07781 Qi & USB Charging station

QI & USB CHARGING STATION /

XXXXXXXX TWC 3 A2 QI & USB CHARGING STATION Operation and Safety Notes XXXXXXXXXXXX Instrucciones de utilizacin y de seguridad Distributed by / Distribuido por:

LIDL US, LLC, Arlington, VA 22202 Model No. / Modelo Nm.:

HG07781A-US, HG07781B-US Version / Versin: 07/2022 Made in / Hecho en: China IAN 420488_2201 IAN 420488_2201 US-EN Operation and Safety Notes US-ES Instrucciones de utilizacin y de seguridad Page 3 Pgina 21 Description of signal words ............................ Page Customer service ................................................. Page Introduction ........................................................... Page Intended use .......................................................... Page Trademark notices .............................................. Page Important safety instructions........................ Page Description of parts ........................................... Page Technical data ...................................................... Page Scope of delivery ................................................ Page Before use .............................................................. Page Operation ............................................................... Page Troubleshooting ................................................... Page Storage when not in use .................................. Page Cleaning .................................................................. Page Disposal ................................................................... Page Three year limited warranty .......................... Page 4 4 5 5 6 6 11 13 14 14 14 16 17 17 18 18 US-EN 3 DESCRIPTION OF SIGNAL WORDS WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury. CAUTION indicates a hazardous situation that, if not avoided, could result in minor or moderate injury. NOTICE indicates information considered important, but not hazard related (e.g. messages related to property damage). 4 US-EN CUSTOMER SERVICE Call customer service at 1 (844) 543-5872 Visit the Website Customer Service Platform at www.lidl.com/contact-us Visit a LIDL store for further assistance. Please have your IAN number ready. IAN 420488_2201 QI & USB CHARGING STATION P Introduction Congratulations on your purchase. You have selected a quality product. The instructions for use are a part of the product. They contain important information about the safety, use and disposal of the product. Before using the product, please learn about all the safety information and usage instructions. Only use the product as described and for the specified applications. If you lend the product to someone else, please also give all the instructions. US-EN 5 P Intended use The QI & USB CHARGING STATION (hereinafter referred to as the Product) is an information electronics device. This product is only for charging mobile devices that use Qi technology. Other devices cannot be charged with the product. The product is intended for private use only and not for commercial use. The manufacturer accepts no liability for damage resulting from unauthorised modifications or improper use. P Trademark notices USB is a registered trademark of USB Implementers Forum, Inc. Qi and the Qi logo mark are trademark of the Wireless Power Consortium (WPC). The TRONIC trademark and trade name is the property of their respective owners. Any other names and products are trademarks or registered trademarks of their respective owners. 6 US-EN IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS. KEEP FOR FUTURE REFERENCE. INCLUDE ALL DOCUMENTATION WHEN PASSING THIS PRODUCT ON TO OTHERS. DANGER TO LIFE AND RISK OF ACCIDENT FOR INFANTS AND CHILDREN!

Risk of suffocation!

Never leave children unsupervised with the packaging material. The packaging materials pose a suffocation hazard. Children frequently underestimate the dangers. The packaging materials are not toys. This product is not intended for use by persons

(including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety. Children should be supervised to ensure that they do not play with the product. US-EN 7 Risk of property damage This product does not contain any parts which can be serviced by the user. Keep the product away from moisture, dripping and splashing water!

Do not place burning candles or other open fire on or next to the product. Check the product before every use! Discontinue use if any damage to the product or the charging cable is detected!

If you notice smoke or an unusual noise or odor, unplug the product immediately and remove the USB cable. Sudden temperature changes may cause condensation inside the product. In this case, allow the product to acclimatise for some time before using it again to prevent short circuits!

Do not operate the product near heat sources, e.g. radiators or other devices emitting heat!

Do not try to open the product! It has no internal parts requiring maintenance. 8 US-EN Radio interference Never use the product on airplanes, in hospitals, service rooms, or near medical electronic systems. The wireless signals transmitted could impact the functionality of sensitive electronics. Keep the product at least 0.65 ft / 20 cm from pacemakers or implantable cardioverter-defibrillators, as the electromagnetic radiation may impair the functionality of pacemakers. The radio waves transmitted could cause interference in hearing aids. Do not place the product near flammable gases or potentially explosive areas (e.g. paint shops) with the wireless components on, as the radio waves emitted can cause explosions and fire. The range of the radio waves varies by environmental conditions. In the event of wireless data transmission, unauthorized third parties receiving the data cannot be excluded. Lidl US, LLC is not responsible for interference with radios or televisions due to unauthorized modification of the product. Lidl US, LLC further assumes no liability for using US-EN 9 or replacing cables and products not distributed by Lidl US, LLC. The user of the product id fully responsible for correcting interference caused by such unauthorized modification to the product, as well as replacement of such products. Ensure that:

no direct heat sources (e.g. heating) can affect the product. the product is not exposed to bright artificial light. any contact with splashed and dripping water and corrosive liquids is avoided and the product are not operated in the vicinity of water. In particular, the product should never be submerged in liquid; do not place any vessels filled with liquid, for example, vases or drinks, on or near the product. the product is not used in the immediate vicinity of magnetic fields (e.g. speakers). no fire sources (e.g.burning candles) are placed on or near the product. no foreign objects penetrate the product. the product is never subjected to extreme temperature fluctuations as this could result in condensation and electrical short circuits. If the product were subjected to extreme temperature fluctuations, however, wait (2 hours) until the 10 US-EN product has reached ambient temperature before use. the product is never subjected to excessive shocks and vibrations. the connected cables are always laid in such a manner that nobody can step on or trip over them. There is a risk of injury. no objects are placed on a connected cable and cables are not connected over sharp edges because this could otherwise damage the functionality of sensitive electronics. Changes or modification to this product not expressly approved by the party responsible for compliance could void the users authority to operate the product. This product has been tested and complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that US-EN 11 interference will not occur in a particular installation. If this product causes harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the product and receiver. Connect the equipment to an outlet on a different circuit than the one the receiver is connected to. Consult the dealer or an experienced radio / TV technician for help. This product complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This product may not cause harmful interference, and (2) this product must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-

located or operating in conjunction with any other antenna or transmitter. 12 US-EN SAVE THESE INSTRUCTIONS

Description of parts 1 Qi Charging surface 2 LED indicator 3 USB type A output 4 USB type C input socket 5 USB type A plug 6 USB charging cable 7 USB type C plug 8 Instructions for use 9 USB type A output US-EN 13 9 5 6 7 1 2 3 4 8 14 US-EN

Technical data Dimensions:

71/16 x 35/16 x 35/16 in

(180 x 84 x 84 mm) 6.7 oz (190 g) 41 95F (5 35C) 32 113F (0 45C) Weight:

Operating temperature:

Storage temperature:

Humidity(no condensation): 10 70 %

USB charging cable length: 3.2 ft (1 m) Input volage / current:

Output power for Qi Charging surface 1 :

USB type A 3 output:

USB type A 9 output:

10 W max*. 5 V 9 V 5 V

, 3 A

, 1 A max.**

, 1 A max.**

Frequency band:

Transmitted maximum radio frequency power (H-eld): -20.55 dBuA/m at 114.6-144.2 kHz 10m distance Maximum distance between charger and mobile device:

0.2 in ( 5 mm) US-EN 15

To achieve the maximum output power of 10 W, you must use a USB adapter with output power of at least 27 W. Such USB adapter is not included in delivery. (Only USB charging cable type A to type C is included.)

output 9 total output current 1 A Max if both output in operated. USB type A output 3 and USB type A The specication and design may be changed without notication.

Scope of delivery 1 Qi & USB charging station 1 USB charging cable 1 Instructions for use

Before use Before use, verify the package contents are complete and undamaged!

All parts have to be unpacked and the packaging material has to be removed completely. 16 US-EN If you notice any damage or missing parts, contact the dealer who sold this product. P Operation The product must not be charged at a PC or notebook due to the high power consumption. The product only supports devices with Qi wireless technology. Charge your device with Qi Charging surface 1 1. Plug the USB type A plug 5 of the USB charging cable 6 into the USB port on a suitable USB adapter (not included) and plug the USB type C plug 7 into USB type C input socket 4 of the product. 2. Plug the USB adapter (not included) into an easily accessible mains socket. 3. LED indicator 2 will light up blue for approx. two seconds when the product is under standby mode and there is no mobile device on the Qi charging surface 1 . US-EN 17 4. Place the mobile device on the Qi charging surface 1 . Make sure the center of the device is aligned over the center of the Qi charging surface. Charging will begin on contact. The LED indicator 2 lights up blue when charging is active on Qi charging surface 1 . Protective covers that protect the mobile device may interfere with the charging process. In this case, the mobile device must be removed from the protective cover.

depending on the power adapter used. The charging power is up to 10 W, LED indicator 2 status The product uses an LED indicator to show the operating status:

LED indicator Status Blue lights up for 2 seconds Starting process (Boot phase) /

Standby Blue lights up Red is flashing Red lights up 18 US-EN Charging / Full Charge Metal obstruction Incompatible adapter or cable connected Using USB type A output 3 The charger has two USB type A outputs ( 3 and 9). When used simultaneously, the total current consumption of the connected devices must not exceed 1 A. 9 3 US-EN 19 P Troubleshooting What should I do if the LED indicator of the product is not lit during starting process (Boot phase)?

Check the USB cable connection between USB adapter (not included) and the product. The USB cable must be firmly connected. Check the connection between the mains socket and the USB adapter (not included). Alternatively, the user must try another mains socket. What should I do if the mobile device does not get charging ?

Check that the mobile device have Qi wireless charging technology. Check the mobile device is placed horizontally on the center position of the charging pad. Check that no foreign object blocking the charging. 20 US-EN Check whether the mobile device is removed from the protective cover. What should I do if the LED indicator flashes red?

This indicates a metal obstruction occurred. Disconnect the USB connection immediately. Check that no foreign object blocking the charging. Let the product cool down for a while and try to use it again What should I do if the LED indicator lights up red?

This indicates an incompatible adapter or cable is connected. Disconnect the connection immediately. Choose the appropriate adapter, cross-check the adapter manual and ensure it can be used with this product. Use the provided USB cable to connect with the product. P Storage when not in use Store the product in a dry interior, away from direct sunlight, preferably in its original packaging. US-EN 21 P Cleaning This product has no internal parts requiring maintenance. Moisture entering the product may result in damage. Ensure no moisture enters the product during cleaning to prevent damaging the product beyond repair. Do not use abrasive, solvent-based or aggressive cleaners. These can damage the surface of the product. Only clean the product with a slightly damp cloth and mild washing-up liquid. P Disposal Dispose of the packaging through your local recycling facilities and in compliance with all federal, state and local regulations. Please note the package markings regarding waste separation, indicated by abbreviations (a) and numbers (b), meaning: 17: plastics / 2022: paper and cardboard / 8098: composite materials. Contact your local waste management authority for additional information on how to dispose of the used product. To help protect the environment, please dispose of the product properly when it has reached the end of its useful life, do not 22 US-EN throw in the garbage. Information on collection sites and their opening hours is available from your local authority. P Three year limited warranty What does this warranty cover?

The warranty covers:

Damage, breakage or inoperability due to defect. Damage not caused by normal wear and tear or failure to follow the safety and maintenance instructions provided in the user manual. What is not covered by the warranty?

The warranty does not cover damage caused by:

Normal wear and tear of the product, including fragile parts

(such as switches, glass, etc.);

Improper use or transport;

Disregarding safety and maintenance instructions;

Accidents or acts of nature (e.g. lightning, fire, water, etc.);

Tampering with the product (such as removing cover, unscrewing screws etc.) Consequential and incidental damages are also not covered under this warranty. However, some states do not allow the exclusion or limitation of incidental or consequential damages, US-EN 23 so this limitation or exclusion may not apply to you. What is the period of coverage and warranty resolution?

The warranty is for 3 years from the date of purchase. At our discretion, product will either be refunded or replaced. What will we not do?

We will not:

Start a new warranty period upon product exchange;

Repair product. How to process the warranty?

To initiate, please:

Call customer service at 1 (844) 543-5872 Visit the Website Customer Service Platform at www.lidl.com/

contact-us or Visit a LIDL store for further assistance To ensure the quickest warranty return process, please have the following available:

The original sales receipt that includes the date The product and manual in the original package;

purchased;

24 US-EN A statement of the problem. What must you do to keep the warranty in effect?

Retain the original receipt;

Follow all product instructions;

Do not repair or modify the product. How does state law relate to this warranty?

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. All implied warranties are limited by the duration and terms of this warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. US-EN 25

420488_2201 size: 47.25 x 36.4 mm Model A TWC 3 A2 IAN 420488_2201 QI & USB CHARGING STATION/ XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Model No./ N. de modelo : HG07781A-US Input/ Entrada : 9V 3A Wireless output/Salida inalmbrica: 10W Max./ mx. USB output/ Salida USB: 5V 1A Max. USB output/ Salida USB (Watch holder): 5V 1A Max./ mx. All USB output/ XXXXXXXXXXXXX (total) : 1 A Max This product complies with part 15 of the FCC following two conditions: (1) This product may not cause harmful interference, and

(2) this product must accept any interference received, including interference that may cause undesired operation./ Este producto cumple con la parte 15 del reglamento FCC. La operacin est sujeta a las siguientes dos condiciones: (1) Este dispositivo puede que no cause interferencia daina, y (2) este dispositivo debe aceptar cualquier interferencia recibida, incluyendo interferencia que pueda causar una operacin no deseada. FCC ID: 2AJ9O-HG07781 Rules. Operation is subject to the Made in/ Hecho en: China Distributed by/ Distribuido por Lidl US, LLC, Arlington, VA 22202 Version/Versin : 07/2022 Model B TWC 3 A2 IAN 420488_2201 QI & USB CHARGING STATION/ XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Model No./ N. de modelo : HG07781B-US Input/ Entrada : 9V 3A Wireless output/Salida inalmbrica: 10W Max./ mx. USB output/ Salida USB: 5V 1A Max. USB output/ Salida USB (Watch holder): 5V 1A Max./ mx. All USB output/ XXXXXXXXXXXXX (total) : 1 A Max This product complies with part 15 of the FCC following two conditions: (1) This product may not cause harmful interference, and

(2) this product must accept any interference received, including interference that may cause undesired operation./ Este producto cumple con la parte 15 del reglamento FCC. La operacin est sujeta a las siguientes dos condiciones: (1) Este dispositivo puede que no cause interferencia daina, y (2) este dispositivo debe aceptar cualquier interferencia recibida, incluyendo interferencia que pueda causar una operacin no deseada. FCC ID: 2AJ9O-HG07781 Rules. Operation is subject to the Made in/ Hecho en: China Distributed by/ Distribuido por Lidl US, LLC, Arlington, VA 22202 Version/Versin : 07/2022 m m 0 4

. 6 3 m m 0 5

. 1 3 47.25 mm 44.00 mm

Lidl US, LLC TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Confidentiality Request regarding application for FCC ID: 2AJ9O-HG07781 Regarding:

LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITYRemark045,90180 Additionally, the applicant requests the following documents be held confidential until the device is marketed or 0 days from the grant date, whichever is less. If the device is marketed within 0 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. Delete any document that is NOT included in your application External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Meagan McNamee Signature:

On behalf of Company: Lidl US, LLC Telephone: 703-772-8173 E-mail: meagan.mcnamee@lidl.us Title: Director Quality Assurance

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Lidl US, LLC 3500 S Clark Street, ARLINGTON VA 22202, USA Address Grantee Code FCC ID Contact Email Contact Phone Authorized Contact Name 2AJ9O 2AJ9O-HG07781 Meagan McNamee meagan.mcnamee@lidl.us 703-772-8173 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature:

Print Name: Meagan McNamee Title:

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Director Quality Assurance Date: 2022-03-24 a) b) c) d) e) f) g) Applicant Declaration Rev:0.0

Lidl US, LLC TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Date: 2022-03-24 Regarding: FCC ID: 2AJ9O-HG07781 To whom it may concern:

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou Branch and Kobe Jian in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Lidl US, LLC. This authorization is valid until further written notice from the applicant. Print Name: Meagan McNamee Signature:

On behalf of Company: Lidl US, LLC Telephone: 703-772-8173 E-mail: meagan.mcnamee@lidl.us Title: Director Quality Assurance

Lidl US, LLC Cover Letter-Wireless Charger Approval Date: 2022-03-24 Gentlemen:

Theres a Qi & USB Charging station that would like to have your authorization as an Inductive wireless power transfer applications approval. The specific product as below, Qi & USB Charging station, with its designed features and specified description, meets special requirements for KDB 680106 D01 section 5.2 requirements. Company:

Product Name:

Model Number:

FCC ID:

KDB 680106 D01 Section 5.2 Requirements a) Power transfer frequency is less that 1 MHz Product Technical Specification 114.54-144.07 kHz Lidl US, LLC Qi & USB Charging station HG07781A-US,HG07781B-US 2AJ9O-HG07781 5W, 7.5W, 10W b) Output power from each primary coil is less than or equal to 15 watts. c) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils d) Client device is placed directly in contact with the transmitter. e) Mobile exposure conditions only Result Complied Complied Complied Complied Complied Complied For inductive applications where the primary does not physically attach to the client, and it is intended for desktop use, the desktop guidance in KDB 680106 D01 may be applied Please refer to RF exposure report Title: Director Quality Assurance f) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Sincerely, Print Name: Meagan McNamee Signature:

On behalf of Company: Lidl US, LLC Telephone: 703-772-8173 E-mail: meagan.mcnamee@lidl.us