all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual 20171106 v1 - user manual | Users Manual | 2.09 MiB | ||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Internal Photos | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | User Manual 20171106 v1 - user manual | Users Manual | 2.09 MiB |
Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . 3 Information about these operating instructions . . 3 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Warning types . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Basic safety guidelines . . . . . . . . . . . . . . . . . . . . 5 Descriptions of components . . . . . . . . 10 Operation . . . . . . . . . . . . . . . . . . . . . . 11 Check the package contents . . . . . . . . . . . . . . 11 Disposal of packaging materials . . . . . . . . . . . . 12 Power supply receiver . . . . . . . . . . . . . . . . . . . . 12 Inserting/replacing the batteries . . . . . . . . . . . . 12 Handling and operation . . . . . . . . . . . 14 Selecting the signal type . . . . . . . . . . . . . . . . . . 14 Adjusting the signal sound volume . . . . . . . . . . 15 Selecting the doorbell melody . . . . . . . . . . . . . 15 Synchronizing the transmitter and receiver . . . 16 Mounting the transmitter . . . . . . . . . . . . . . . . . 17 Maintenance . . . . . . . . . . . . . . . . . . . . 18 Troubleshooting . . . . . . . . . . . . . . . . . 19 US - EN1 IB_289974_SFSS2B2_LB9.indb 1 25.08.17 09:30 SFS 52 B2 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . 20 Storage when not in use . . . . . . . . . . . 20 Disposal . . . . . . . . . . . . . . . . . . . . . . . . 21 Disposal of device . . . . . . . . . . . . . . . . . . . . . . . 21 Disposal of batteries . . . . . . . . . . . . . . . . . . . . . 21 Appendix . . . . . . . . . . . . . . . . . . . . . . . 22 Technical specifications . . . . . . . . . . . . . . . . . . . 22 FCC Compliance Statement . . . . . . . . . . . . . . . 23 3 year limited warranty . . . . . . . . . . . . . . . . . . . 25 Distributor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 2US - EN IB_289974_SFSS2B2_LB9.indb 2 25.08.17 09:30 SFS 52 B2 Introduction Information about these operating instructions READ ALL INSTRUCTIONS BEFORE USE . The operating instructions are part of this product . They contain important information about safety, usage, and disposal . Before using the product, please familiarize yourself with all operating and safety instructions . Use the product only as described and for the specified range of applications . Keep these operating instructions as a refe-
rence and store them near the product . Please pass on all documentation incl . these operating instructions to any future owner(s), if you sell this product or give it away . US - EN3 IB_289974_SFSS2B2_LB9.indb 3 25.08.17 09:30 SFS 52 B2 Intended use This appliance serves as a wireless doorbell system to announce visitors, allowing for the operation of a door bell without any wiring . The appliance is not intended for any other purpose, nor for use beyond the scope described . The appliance is not intended for use in commer-
cial or industrial environments . The manufacturer accepts no responsibility for damage caused by failure to observe these instructions, improper use or repairs, unauthorized modifications, or the use of unapproved replacement parts . The risk shall be borne solely by the user . Warning types The following types of warning are used in these operating instructions:
WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury . 4US - EN IB_289974_SFSS2B2_LB9.indb 4 25.08.17 09:30 SFS 52 B2 NOTICE indicates information that is considered important, but not hazardous (e . g . messages related to property damage) . A tip provides additional information that will assist you in using the device. Safety This section contains important safety instructions for using the appliance . This appliance complies with statutory safety regulations . Improper use may result in personal injury and property damage . Basic safety guidelines This appliance may be used by children who are 8 years of age or older and by persons with limited physical, sensory or mental capa-
bilities, or lack of experience and knowledge, provided that they are under supervision or have been told how to use the appliance safely and are aware of the potential risks . US - EN5 IB_289974_SFSS2B2_LB9.indb 5 25.08.17 09:30 SFS 52 B2 Children must not use the appliance as a toy . Cleaning and user maintenance tasks may not be carried out by children unless they are supervised . Do not allow children to play with the packaging materials!
Keep all packaging materials away from children . Risk of suffocation!
The plug is used as a separator from the electricity grid and must always be readily accessible . Risk of explosion if the battery is replaced incorrectly . Replace only with the same or equivalent type . Do not place any sources of open flames, such as lighted candles, on the appliance . Check the appliance for visible external damage before use . Do not operate an appliance that has been damaged or dropped . Do not expose the appliance to direct sunlight or high temperatures . Otherwise it may overheat and be irreparably damaged . 6US - EN IB_289974_SFSS2B2_LB9.indb 6 25.08.17 09:30 SFS 52 B2 Do not expose the receiver to spraying or dripping water and do not place liquid-filled objects, such as vases or open drink containers, on or near the receiver . Electric voltage!
Never open the housing of the receiver . There are no serviceable or replaceable components inside the appliance . Do not make any unauthorized modifica-
tions or alterations to the appliance . Repairs should only be carried out by authorized service providers or by the customer service department . Improper repairs may put the user at risk . It will also invalidate any warranty claims . Unplug the appliance immediately if you smell burning or notice smoke . Have the appliance checked by a qualified specialist before using it again . US - EN7 IB_289974_SFSS2B2_LB9.indb 7 25.08.17 09:30 SFS 52 B2 Mishandling the batteries can cause fires, explosions, leakages, or other hazards!
In order to handle batteries safely, please observe the following safety instructions:
Do not throw the batteries into a fire and do not subject them to high temperatures . Do not open, deform, or short-circuit batteries, since this can lead to chemical leakage . Do not attempt to recharge the batteries . Check the condition of the batteries at regular intervals . Leaking chemicals can cause perma-
nent damage to the appliance . Take particular care when handling damaged or leaking batteries . Risk of acid burns! Wear protective gloves . Chemicals that leak from a battery can cause skin irritation . In the event of contact with the skin, rinse with plenty of water . If the chemicals come into contact with your eyes, rinse them thoroughly with water, and do not rub them . Consult a physician immediately . 8US - EN IB_289974_SFSS2B2_LB9.indb 8 25.08.17 09:30 SFS 52 B2 Keep batteries out of the reach of children . Children might put batteries into their mouth and swallow them . If a battery has been swal-
lowed, seek medical assistance immediately . Always insert the batteries the right way
(observe correct polarity); otherwise there is a risk that they could explode . If you do not intend to use the appliance for a long time, remove the batteries . Do not ingest the battery there is a risk of chemical burns!
This product contains a button cell battery . Swallowing the button cell battery can cause severe internal burns in just 2 hours and can lead to death . Keep new and old batteries away from children . If the battery compartment does not close securely, stop using the product and keep it away from children . US - EN9 IB_289974_SFSS2B2_LB9.indb 9 25.08.17 09:30 SFS 52 B2 Descriptions of components
(See fold-out page for illustrations) Receiver (Fig . A) 1 Speaker 2 Signal display 3 Signal type switch (optical/acoustic) 4 Volume button (VOL) 5 Melody selection button 6 Synchronization button Transmitter (Fig . B) 7 Name plate cover 8 Doorbell button 9 Battery compartment 0 Battery compartment cover q Mounting plate Accessories (Fig . C) w Double-sided adhesive tape e Name plate r Anchor t Screw z 3V battery, type CR2032 10US - EN IB_289974_SFSS2B2_LB9.indb 10 25.08.17 09:30 SFS 52 B2 Operation Check the package contents
(See fold-out page for illustrations) The scope of delivery includes the following components:
1 x receiver 1 x transmitter 1 x 3V battery, type CR2032 5 x name plates 2 x wall plugs with screws for sender assembly 1 x double-sided adhesive tape These operating instructions Remove all parts of the appliance from the packaging and remove all packaging materials . Check the package for completeness and for signs of visible damage . If the delivery is incomplete or damage has occurred as a result of defective packaging or during transport, contact the customer service hotline (see section about 3 year limited warranty) . US - EN11 IB_289974_SFSS2B2_LB9.indb 11 25.08.17 09:30 SFS 52 B2 Disposal of packaging materials The packaging protects the appliance from damage during transport . The packaging materials have been selected for their environ-
mental friendliness and ease of disposal, and are therefore recyclable . Returning the packaging into the material cycle conserves raw materials and reduces the amount of waste generated . Dispose of packaging materials that are no longer needed in accordance with applicable local regulations . Power supply receiver The receiver must be plugged into a properly installed power socket and does not require batteries . Inserting/replacing the batteries Open the battery compartment 9 by inserting a coin into the slot and turning the battery compartment cover 0 counterclock-
wise . The arrow on the lid must point to the open lock symbol
(see Fig . 1) . 12US - EN IB_289974_SFSS2B2_LB9.indb 12 25.08.17 09:30 SFS 52 B2 Insert a CR2032 battery into the battery compartment 9 . The positive pole must point upwards (see Fig . 2) . Place the battery compartment cover 0 back on the battery compartment 9 and lock it by turning the battery compartment cover 0 clockwise . The arrow on the lid must point to the closed lock symbol Otherwise, the IP protection is not guaranteed . Fig . 1 Fig . 2 US - EN13 IB_289974_SFSS2B2_LB9.indb 13 25.08.17 09:30 SFS 52 B2 If the performance of the appliance deteriorates or completely stops, it means the battery is depleted. Replace the used battery with a new one of the same type. Handling and operation Selecting the signal type The receiver can indicate the reception of a door-ring signal either optically, acoustically, or both optically and acoustically . To select, move the signal type switch 3 to the desired position:
acoustic doorbell signal only, the selected melody will be played optical doorbell signal only, the signal display flashes optical and acoustic doorbell signal 14US - EN IB_289974_SFSS2B2_LB9.indb 14 25.08.17 09:30 SFS 52 B2 Adjusting the signal sound volume Press the VOL button 4 repeatedly until the desired volume is set . Loud Medium Quiet Selecting the doorbell melody There are 52 different doorbell melodies stored in the appliance . Press the melody select button Stop the selection when you hear the 5 . desired melody . The appliance will use the last-played melody . If you remove the receiver from the power socket, the set melody remains saved for approximately 40 seconds. After this time, you need to set your desired melody anew. US - EN15 IB_289974_SFSS2B2_LB9.indb 15 25.08.17 09:30 SFS 52 B2 Synchronizing the transmitter and receiver The transmitter and receiver of this wireless doorbell system can communicate with each other via a number of different codings . This means that you can operate up to 5 transmit-
ters with one receiver . In addition, you can expand the wireless doorbell system with any number of receivers . However, this is only possible if the transmitter and receiver within a system are working on the same frequency . For this, you must synchronize the devices as follows:
Press the synchronization button 6 on the receiver . Now press the doorbell button 8 on the transmitter . If the synchronization is successful, the receiver notifies you of the programmed call signal . Should the receiver not react as described, repeat the synchronization . 16US - EN IB_289974_SFSS2B2_LB9.indb 16 25.08.17 09:30 SFS 52 B2 To cancel the synchronization between transmitter and receiver, press and hold the synchronization button 6 on the receiv-
er for about 5 seconds. Pull the receiver out of the power socket and wait for about 10 seconds to clear all connections between the transmitter and the receiver. Mounting the transmitter Select a suitable position for the transmitter, close to your front door . Mark the positions for the required drill holes with the help of the mounting plate q and drill the holes for the supplied anchors r
(5mm (3/16") drill) . Push the anchors into the drill holes and screw the mounting plate q onto the wall using the screws t . Push the transmitter onto the mounting plate q until it clicks audibly into place . US - EN17 IB_289974_SFSS2B2_LB9.indb 17 25.08.17 09:30 SFS 52 B2 Alternatively, you can mount the transmitter onto a suitable surface using the double-sided adhesive tape w. Label one of the supplied name plates e . If you label the name plate by hand, make sure you use a waterproof pen . Remove the name plate cover 7 from the transmitter and insert your name plate into the recess on the transmitter . Put the name plate cover 7 back on the transmitter . Maintenance The appliance is maintenance-free . No form of maintenance, neither on nor inside the appliance, is intended to be carried out by the user . In the event of malfunction or apparent damage, contact the customer service department . If the appliance is not going to be used for an extended period, remove the batteries . 18US - EN IB_289974_SFSS2B2_LB9.indb 18 25.08.17 09:30 SFS 52 B2 Troubleshooting There is no ring when pressing the doorbell button Check whether there is a battery (type CR2032) in the transmitter . Check whether the power outlet being used for the receiver is working properly . It is possible that the transmitter is not synchronized with the receiver . Repeat the synchronization steps . Ensure that the signal type switch is set to or the position
. The range is reduced A weak battery will reduce the range . Change the battery every 1218 months . Metal constructions, walls, ceilings or other appliances that use the same frequency can affect the range . Try to avoid mounting the transmitter in the immediate vicinity of any metal parts . US - EN19 IB_289974_SFSS2B2_LB9.indb 19 25.08.17 09:30 SFS 52 B2 If you cannot solve the problem with the aforementioned methods, please contact the customer service department (see section on 3 year limited warranty). Cleaning There are no serviceable parts or parts requir-
ing cleaning inside the appliance . Moisture can cause damage to the appliance . Do not use caustic, abrasive or solvent-based cleaning materials . They can damage the surface of the appliance . Clean the surface of the appliance housing with a lightly damp cloth and a mild detergent . Storage when not in use Store the appliance in a clean, dry, dust-free place, away from direct sunlight . 20US - EN IB_289974_SFSS2B2_LB9.indb 20 25.08.17 09:30 SFS 52 B2 Disposal Disposal of device Electrical devices may not be thrown away as part of normal household trash . If you can no longer use your electrical device, dispose of it in accordance with the legal provisions applicable in your state . This will ensure that old electrical devices are recycled and environ-
mental pollution is kept to a minimum . Further information about disposal is available on the Internet at www .epa .gov . Disposal of batteries Some batteries contain heavy metals such as mercury, lead, cadmium, and nickel; therefore, many communities do not allow them to be thrown away with your regular trash . Recycling is always the best option for disposing of used batteries . Dry-Cell Batteries are used in a variety of elec-
tronics and include alkaline and carbon zinc
(9-volt, D, C, AA, AAA), mercuric-oxide (button, some cylindrical and rectangular), silver-oxide and zinc-air (button), and lithium (9-volt, C, AA, coin, button, rechargeable) batteries . Look for in-store recycling bins or community collection events to dispose of these batteries . US - EN21 IB_289974_SFSS2B2_LB9.indb 21 25.08.17 09:30 SFS 52 B2 Appendix Technical specifications Power supply:
receiver Power consumption of the receiver Protection class of the receiver Power supply:
transmitter Transmitting frequency Transmission output Range Number of doorbell tones Protection class:
transmitter 22US - EN 110240V alterna-
ting current, 50/60 Hz Operation: 0 .03 A Standby: 1 .3 mA II /
1 x 3V battery, type CR2032, direct current 433.92 MHz max . 18 dBm approx . 328 ft (100 m)
(free field) 52 IPX4 IB_289974_SFSS2B2_LB9.indb 22 25.08.17 09:30 SFS 52 B2 FCC Compliance Statement This device complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions:
(1) This device may not cause harmful inter-
ference, and (2) this device must accept any interference received, including interference that may cause undesired operation . CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment . NOTE: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to part 15 of the FCC rules . These limits are designed to provide reasonable protection against harmful inter-
ference in a residential installation . This equip-
ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications . However, there is no guarantee that interfer-
ence will not occur in a particular installation . US - EN23 IB_289974_SFSS2B2_LB9.indb 23 25.08.17 09:30 SFS 52 B2 If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna .
- Increase the separation between the equip-
ment and the receiver .
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected .
- Consult the dealer or an experienced radio/
TV technician for help . 24US - EN IB_289974_SFSS2B2_LB9.indb 24 25.08.17 09:30 SFS 52 B2 3 year limited warranty What does this warranty cover?
The warranty covers:
Damage, breakage or inoperability due to defect . Damage not caused by normal wear and tear or failure to follow the safety and maintenance instructions provided in the user manual . What is not covered by the warranty?
The warranty does not cover damage caused by:
Normal wear and tear of the product, including fragile parts (such as switches, glass, etc .);
Improper use or transport;
Disregarding safety and maintenance instructions;
Accidents or acts of nature (e .g . lightning, fire, water, etc .);
Tampering with the product (such as remov-
ing cover, unscrewing screws etc .) US - EN25 IB_289974_SFSS2B2_LB9.indb 25 25.08.17 09:30 SFS 52 B2 Consequential and incidental damages are also not covered under this warranty . However, some states do not allow the exclusion or limita-
tion of incidental or consequential damages, so this limitation or exclusion may not apply to you . What is the period of coverage and warranty resolution?
The warranty is for 3 years from the date of purchase . At our discretion, product will either be refunded or replaced . What will we not do?
We will not:
Start a new warranty period upon product exchange;
Repair product . 26US - EN IB_289974_SFSS2B2_LB9.indb 26 25.08.17 09:30 SFS 52 B2 How to process the warranty?
To initiate, please:
Call customer service at 1 (844) 543-5872 Visit the Website Customer Service Platform at www .lidl .com/contact-us or Visit a LIDL store for further assistance To ensure the quickest warranty return process, please have the following available:
The original sales receipt that includes the date purchased;
The product and manual in the original package;
A statement of the problem . What must you do to keep the warranty in effect?
Retain the original receipt;
Follow all product instructions;
Do not repair or modify the product . US - EN27 IB_289974_SFSS2B2_LB9.indb 27 25.08.17 09:30 SFS 52 B2 How does state law relate to this warranty?
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state . All implied warranties are limited by the duration and terms of this warranty . Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you . Distributor LIDL US LLC . ARLINGTON VA 22202 28US - EN IB_289974_SFSS2B2_LB9.indb 28 25.08.17 09:30 SFS 52 B2 Tabla de contenido Introduccin . . . . . . . . . . . . . . . . . . . . . 31 Informacin sobre este instructivo de uso . . . . . 31 Uso previsto . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Tipos de advertencias . . . . . . . . . . . . . . . . . . . . 32 Seguridad . . . . . . . . . . . . . . . . . . . . . . 33 Gua bsica de seguridad . . . . . . . . . . . . . . . . 33 Descripcin de los componentes . . . . 38 Operacin . . . . . . . . . . . . . . . . . . . . . . 39 Revisin del contenido del paquete . . . . . . . . . 39 Eliminacin de materiales de empaque . . . . . . 40 Fuente de alimentacin receptor . . . . . . . . . . . . 40 Insercin y reemplazo de la batera . . . . . . . . . 40 Manejo y operacin . . . . . . . . . . . . . . 42 Seleccin del tipo de sealizacin . . . . . . . . . . 42 Ajuste del volumen de la sealizacin sonora . 43 Seleccin de la meloda de timbre . . . . . . . . . . 43 Sincronizacin del transmisor y receptor . . . . . 44 Montaje del transmisor . . . . . . . . . . . . . . . . . . 45 Mantenimiento . . . . . . . . . . . . . . . . . . 46 Solucin de problemas . . . . . . . . . . . . 47 US - ES29 IB_289974_SFSS2B2_LB9.indb 29 25.08.17 09:30 SFS 52 B2 Limpieza . . . . . . . . . . . . . . . . . . . . . . . . 48 Almacenamiento cuando no se usa . . 49 Eliminacin . . . . . . . . . . . . . . . . . . . . . . 49 Eliminacin del aparato . . . . . . . . . . . . . . . . . . 49 Eliminacin de bateras . . . . . . . . . . . . . . . . . . . 50 Apndice . . . . . . . . . . . . . . . . . . . . . . . 51 Especificaciones tcnicas . . . . . . . . . . . . . . . . . 51 Declaracin de conformidad de la FCC . . . . . . 52 Garanta limitada de 3 aos . . . . . . . . . . . . . . . 54 Importador . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 30US - ES IB_289974_SFSS2B2_LB9.indb 30 25.08.17 09:30 SFS 52 B2 Introduccin Informacin sobre este instructivo de uso LEA TODAS LAS INSTRUCCIONES ANTES DEL USO . El instructivo de uso es parte de este pro-
ducto . Contiene informacin importante sobre seguridad, uso y eliminacin . Antes de usar el producto, familiarcese con todas las instrucciones de uso y seguridad . Use el producto solamente como se des-
cribe y para la variedad de aplicaciones especificada . Conserve este instructivo de operacin como referencia y mantngalo cerca del producto . Entregue toda la documentacin, inclu-
yendo este instructivo de operacin, a cualquier propietario futuro si vende este producto o lo regala . US - ES31 IB_289974_SFSS2B2_LB9.indb 31 25.08.17 09:30 SFS 52 B2 Uso previsto Este dispositivo sirve como sistema de timbre inalmbrico para anunciar la llegada de visitas;
el funcionamiento del timbre se lleva a cabo de manera inalmbrica . Este dispositivo no est diseado para ningn otro propsito ni para usarse fuera del uso descrito . Este dispositivo no est diseado para usarse en ambientes comerciales ni industriales . El fabricante no acepta ninguna responsabili-
dad por daos causados por el incumplimien-
to de estas instrucciones, uso inadecuado, reparaciones, modificaciones no autorizadas o por el uso de refacciones no aprobadas . El usuario ser la nica persona que asuma el riesgo . Tipos de advertencias Los siguientes tipos de advertencias se usan en este instructivo de operacin:
ADVERTENCIA indica una situacin peligrosa que, si no se evita, podra provocar la muerte o lesiones graves . 32US - ES IB_289974_SFSS2B2_LB9.indb 32 25.08.17 09:30 SFS 52 B2 AVISO indica informacin que se considera importante, pero no est relacionada con peligro (por ejemplo, mensajes relacionados con daos materiales) . Una sugerencia contiene informacin adi-
cional que le ayudar a usar el dispositivo. Seguridad Esta seccin contiene instrucciones de seguridad importantes para el uso del dispositivo . Este dispositivo cumple con las normas de segu-
ridad legales . El uso inadecuado puede provo-
car lesiones personales y daos materiales . Gua bsica de seguridad Este dispositivo puede ser usado por nios con 8 aos de edad y mayores, y por per-
sonas con capacidades fsicas, sensoriales o mentales limitadas o falta de experiencia o conocimiento, con la condicin de que sean supervisadas o se les haya explicado US - ES33 IB_289974_SFSS2B2_LB9.indb 33 25.08.17 09:30 SFS 52 B2 cmo usar el dispositivo en forma segura y estn conscientes de los riesgos potenciales . Los nios no deben usar el dispositivo como un juguete . Las tareas de limpieza y mante-
nimiento del usuario no pueden ser llevadas a cabo por nios, a menos que sean super-
visados . No permita que los nios jueguen con el material de empaque!
Mantenga todos los materiales de empaque lejos de los nios . Existe el riesgo de asfixia!
La clavija sirve como separador de la red elctrica y debe estar siempre accesible . Existir el riesgo de explosin si se reemplaza la batera incorrectamente . Reemplcelas slo con el mismo tipo u otro equivalente . No coloque fuentes de flamas expuestas, como velas encendidas, sobre el dispositivo . Verifique si el dispositivo muestra dao externo visible antes de usarlo . No opere un dispositivo que haya sido daado o se haya cado . No exponga el dispositivo a la luz del sol directa o a altas temperaturas . De lo contrario, pue-
de sobrecalentarse y sufrir daos irreparables . 34US - ES IB_289974_SFSS2B2_LB9.indb 34 25.08.17 09:30 SFS 52 B2 No exponga el receptor al roco de agua o agua goteando, y no coloque objetos llenos de lquido como floreros o recipientes de bebidas abiertos sobre el dispositivo o cerca de este . Voltaje elctrico!
Nunca abra la carcasa del receptor . El dis-
positivo no tiene componentes a los que el usuario pueda dar servicio ni que puedan reemplazarse . No haga ninguna modificacin o alteracin que no est autorizada al dispositivo . nicamente los proveedores de servicios de reparacin autorizados o el departamento de Servicio al Cliente debern realizar re-
paraciones . Las reparaciones inadecuadas pueden poner en riesgo al usuario . Tambin invalidarn cualquier reclamacin de garanta . Desconecte el dispositivo inmediatamente si huele a quemado o si ve humo . Solicite a un especialista calificado que revise el dispositivo antes de volver a usarlo . US - ES35 IB_289974_SFSS2B2_LB9.indb 35 25.08.17 09:30 SFS 52 B2 El manejo inadecuado de las bateras puede provocar incendios, explosiones, derrames u otros riesgos!
A fin de realizar un manejo adecuado de las bateras, siga las siguientes instrucciones de seguridad:
No arroje las bateras al fuego ni las someta a altas temperaturas . No abra, deforme ni cortocircuite las bateras;
esto puede ocasionar derrames qumicos . No intente recargar las bateras . Revise regularmente la condicin de las bate-
ras . Las bateras con fugas pueden causar dao permanente al dispositivo . Tenga especial cuidado cuando maneje bateras daadas o con fugas . Existe el riesgo de quemaduras por cido! Use guantes de proteccin . La fuga del qumicos de la batera puede cau-
sar irritacin en la piel . En caso de contacto con la piel, enjuague con abundante agua . Si los qumicos entran en contacto con los ojos, 36US - ES IB_289974_SFSS2B2_LB9.indb 36 25.08.17 09:30 SFS 52 B2 enjuguelos con agua abundante y no los frote . Consulte a un mdico de inmediato . Mantenga las bateras fuera del alcance de los nios . Los nios podran llevarse las bateras a la boca e ingerirlas . Si se ha inge-
rido una batera, solicite asistencia mdica inmediatamente . Inserte siempre las bateras correctamente
(observe la polaridad correcta); de no ser as, existe el riesgo de que exploten . Retire la batera si no va a usar el dispositivo durante un tiempo prolongado . No ingiera la batera, existe el riesgo de quemaduras por contacto con qumicos!
Este producto contiene una batera de celda tipo botn . Si se traga la batera de celda tipo botn puede haber quemaduras internas en tan slo 2 horas y esto puede ocasionar la muerte . Mantenga las bateras nuevas y usadas alejadas de los nios . Si el compartimiento de la batera no se cierra en forma segura, deje de usar el pro-
ducto y mantngalo alejado de los nios . US - ES37 IB_289974_SFSS2B2_LB9.indb 37 25.08.17 09:30 SFS 52 B2 Descripcin de los componentes
(Vea las imgenes en la pgina desplegable) Receptor (Fig . A) 1 Bocina 2 Pantalla de sealizacin 3 Interruptor del tipo de sealizacin
(visual / sonora) 4 Botn de volumen (VOL) 5 Botn de seleccin de meloda 6 Botn de sincronizacin Transmisor (Fig . B) 7 Tapa de la placa para nombre 8 Botn del timbre 9 Compartimento de batera 0 Tapa del compartimiento de batera q Placa de montaje Accesorios (Fig . C) w Cinta adhesiva de doble lado e Placa para nombre r Taco t Tornillo z Batera de 3 V, tipo CR2032 38US - ES IB_289974_SFSS2B2_LB9.indb 38 25.08.17 09:30 SFS 52 B2 Operacin Revisin del contenido del paquete
(Vea las imgenes en la pgina desplegable) El alcance de la entrega incluye los siguientes componentes:
1 x receptor 1 x transmisor 1 x batera de 3 V , tipo CR2032 5 x placas para nombre 2 x tacos con tornillos para montaje del transmisor 1 x cinta adhesiva de doble lado Este instructivo de operacin Retire todas las partes del dispositivo del paque-
te y saque todos los materiales de empaque . Verifique que el paquete est completo y no muestre signos visibles de dao . Si la entrega est incompleta o si ha ocurrido dao debido al empaque defectuoso o duran-
te el transporte, pngase en contacto con la lnea directa de Servicio al Cliente (vea la seccin Garanta limitada de 3 aos) . US - ES39 IB_289974_SFSS2B2_LB9.indb 39 25.08.17 09:30 SFS 52 B2 Eliminacin de materiales de empaque El empaque protege el dispositivo contra daos durante el transporte . Los materiales de empa-
que han sido seleccionados por su compatibili-
dad ambiental y facilidad de eliminacin y, por lo tanto, son reciclables . La devolucin del empaque al ciclo de materiales conserva las materias primas y reduce la cantidad de dese-
chos que se generan . Elimine los materiales de empaque que ya no necesite de conformidad con las normas loca-
les aplicables . Fuente de alimentacin receptor El receptor debe estar conectado a una clavija instalada adecuadamente y no requiere bateras . Insercin y reemplazo de la batera Abra el compartimento de batera 9 intro-
duciendo una moneda en la ranura y girando la tapa del compartimento de la batera 0 hacia la izquierda . La flecha en la tapa debe apuntar hacia el smbolo de candado abier-
to
(ver Fig . 1) . 40US - ES IB_289974_SFSS2B2_LB9.indb 40 25.08.17 09:30 SFS 52 B2 Inserte una batera tipo CR2032 en el com-
partimiento de la batera 9 . El polo positivo debe apuntar hacia arriba (ver Fig . 2) . Coloque de nuevo la tapa del compartimien-
to de la batera 0 en el compartimento de la batera 9 y bloquela girando la tapa del compartimiento de la batera 0 hacia la derecha . La flecha en la tapa debe apuntar hacia el smbolo de candado cerrado
. De lo contrario, la proteccin IP no est garantizada . Fig . 1 Fig . 2 US - ES41 IB_289974_SFSS2B2_LB9.indb 41 25.08.17 09:30 SFS 52 B2 Si el funcionamiento del dispositivo empeora, o si deja de funcionar, significa que la ba-
tera se ha agotado. Reemplace la batera usada con una nueva del mismo tipo. Manejo y operacin Seleccin del tipo de sealizacin El receptor puede indicar la recepcin de una seal del timbre, ya sea de manera visual o sonora, o ambas . Para seleccionar una opcin, mueva el interruptor del tipo de sealizacin 3 a la posicin deseada:
slo sealizacin acstica de timbre, se reproducir la meloda seleccionada slo sealizacin ptica de timbre, se iluminar intermitentemente la pantalla de sealizacin sealizacin ptica y acstica de timbre 42US - ES IB_289974_SFSS2B2_LB9.indb 42 25.08.17 09:30 SFS 52 B2 Ajuste del volumen de la sealizacin sonora Presione el botn VOL 4 varias veces hasta ajustar el volumen deseado . Alto Medio Bajo Seleccin de la meloda de timbre El dispositivo ofrece 52 melodas de timbre diferentes . Presione el botn de seleccin de meloda 5 . Detenga la seleccin cuando escuche la meloda deseada . El dispositivo utilizar la ltima meloda reproducida . Si desconecta el receptor de la toma de corriente, la meloda seleccionada se guarda durante 40 segundos aproxima-
damente. Despus de este periodo, tendr que seleccionar nuevamente la meloda deseada. US - ES43 IB_289974_SFSS2B2_LB9.indb 43 25.08.17 09:30 SFS 52 B2 Sincronizacin del transmisor y receptor El transmisor y receptor de este sistema de timbre inalmbrico pueden comunicarse entre s mediante una variedad de diferentes cdigos . Esto significa que puede operar hasta 5 trans-
misores con un receptor . Asimismo, puede ampliar el sistema de timbre inalmbrico con un nmero ilimitado de receptores . Sin embar-
go, esto slo es posible si el transmisor y el receptor en un sistema utilizan la misma fre-
cuencia . Para utilizar esta configuracin, debe sincronizar los dispositivos como se indica a continuacin:
Presione el botn de sincronizacin 6 en el receptor . Ahora presione el botn del timbre 8 en el transmisor . Si la sincronizacin se completa exitosamente, el receptor le notifica con una sealizacin de timbre . Si el receptor no reacciona de tal manera, repita el proceso de sincronizacin . 44US - ES IB_289974_SFSS2B2_LB9.indb 44 25.08.17 09:30 SFS 52 B2 Para cancelar la sincronizacin entre el trans-
misor y el receptor, mantenga presionado el botn de sincronizacin 6 en el receptor durante aproximadamente 5 segundos. Desconecte el receptor de la toma de corrien-
te y espere aproximadamente 10 segundos para que se elimine cualquier conexin entre el transmisor y el receptor. Montaje del transmisor Seleccione una posicin adecuada para el transmisor, cerca de su puerta de entrada principal . Use la placa de montaje q para marcar las posiciones donde deber taladrar los agujeros, y luego utilice los tacos incluidos r
(taladro de 5mm (3/16)) . Empuje los tacos hacia el interior de los agujeros y atornille la placa de montaje q con los tornillos t incluidos . Empuje el transmisor sobre la placa de montaje q hasta que escuche un clic que indica la fijacin . US - ES45 IB_289974_SFSS2B2_LB9.indb 45 25.08.17 09:30 SFS 52 B2 De forma alternativa, puede montar el trans-
misor sobre una superficie adecuada utili-
zando la cinta adhesiva de doble lado w. Etiquete una de las placas para nombre e incluidas . Si escribe el nombre a mano en la placa para nombre, asegrese de usar un bolgrafo con tinta resistente al agua . Retire la tapa de la placa para nombre 7 del transmisor e inserte su placa para nom-
bre en el hueco del transmisor . Coloque la tapa de la placa para nombre 7 nuevamente en el transmisor . Mantenimiento El dispositivo no requiere mantenimiento . El usuario no debe realizar ningn tipo de mantenimiento, ya sea en el interior o exterior del dispositivo . En caso de fallas o dao evi-
dente, comunquese con el departamento de Servicio al Cliente . 46US - ES IB_289974_SFSS2B2_LB9.indb 46 25.08.17 09:30 SFS 52 B2 Si no va a utilizar el dispositivo durante un periodo prolongado, retire la batera . Solucin de problemas No se escucha el timbre cuando se presiona el botn de timbre Revise si el transmisor tiene una batera
(tipo CR2032) . Revise si la toma de corriente que est utili-
zando funciona correctamente . Es posible que el transmisor no est sincro-
nizado con el receptor . Repita el proceso de sincronizacin . Asegrese de que el interruptor del tipo de sealizacin indique El rango es reducido Una batera con poco carga reduce el rango . o
. Cambie la batera cada 12-18 meses . Las construcciones de metal, muros, techos y otros dispositivos que utilizan la misma frecuencia pueden afectar el rango . Evite montar el transmisor muy cerca de partes de metal . US - ES47 IB_289974_SFSS2B2_LB9.indb 47 25.08.17 09:30 SFS 52 B2 Si no puede resolver el problema con los mtodos descritos anteriormente, pngase en contacto con el departamento de Servicio al Cliente (consulte la seccin Garanta limitada de 3 aos). Limpieza No hay partes que requieran servicio o partes que requieran limpieza dentro del dispositivo . La humedad puede causar dao al dispositivo . No use materiales de limpieza custicos, abrasivos ni a base de solventes . Estos pueden daar la superficie del dispositivo . Limpie la superficie del dispositivo con una tela ligeramente humedecida y con deter-
gente suave . 48US - ES IB_289974_SFSS2B2_LB9.indb 48 25.08.17 09:30 SFS 52 B2 Almacenamiento cuando no se usa Guarde el dispositivo en un lugar limpio, seco, sin polvo y alejado de la luz solar directa . Eliminacin Eliminacin del aparato Los aparatos elctricos no deben ser des-
echados como parte de la basura domstica normal . Si ya no puede usar su dispositivo elctrico, elimnelo de conformidad con las disposiciones legales aplicables en su estado . Esto asegura que los dispositivos elctricos usados sean reciclados y la contaminacin ambiental se mantenga a un nivel mnimo . Puede encontrar ms informacin sobre la eliminacin de desechos en Internet en www .epa .gov . US - ES49 IB_289974_SFSS2B2_LB9.indb 49 25.08.17 09:30 SFS 52 B2 Eliminacin de bateras Algunas bateras contienen metales pesados como mercurio, plomo, cadmio y nquel; por ello, muchas comunidades no permiten que se desechen con la basura normal . El reciclaje es siempre la mejor opcin para eliminar las bate-
ras usadas . Las bateras de celda seca se usan en una gran variedad de aparatos electrnicos, e incluyen bateras alcalinas y de carbono-zinc (de 9 voltios, D, C, AA, AAA), de xido de mercurio (de botn, algunas cilndricas y rectangulares), de xido de plata y de zinc aire (de botn) y de litio
(de 9 volts, C, AA, de tipo moneda, de botn, recargables) . Busque los depsitos de reciclaje en las tiendas, o los eventos de recopila cin de la comunidad para desechar estas bateras . 50US - ES IB_289974_SFSS2B2_LB9.indb 50 25.08.17 09:30 SFS 52 B2 Apndice Especificaciones tcnicas Fuente de alimenta-
cin: receptor Consumo de energa del receptor Clase de proteccin del receptor Fuente de alimentacin:
transmisor Frecuencia de transmisin Potencia de transmisin Rango Tonos de timbre disponibles Clase de proteccin:
transmisor 110240V
(corriente alterna), 50/60Hz Operacin: 0 .03A Modo "En espera":
1 .3 mA II /
1 batera de 3 V, tipo CR2032, corriente directa 433.92 MHz mx . 18 dBm aprox . 328 ft (100 m)
(sin obstrucciones) 52 IPX4 US - ES51 IB_289974_SFSS2B2_LB9.indb 51 25.08.17 09:30 SFS 52 B2 Declaracin de conformidad de la FCC Este dispositivo cumple con la parte 15 del Reglamento de la FCC . La operacin est sujeta a las dos siguientes condiciones:
(1) Este dispositivo no puede causar interferen-
cia daina y (2) este dispositivo debe aceptar cualquier interferencia recibida, incluyendo interferencia que pueda causar operacin no deseable . PRECAUCIN: Los cambios o modificaciones no aprobados expresamente por la parte responsa-
ble del cumplimiento normativo podran invalidar la autorizacin al usuario para operar el equipo . NOTA: Este equipo se ha probado y se ha determinado que cumple con los lmites de los dispositivo digitales Clase B, de conformidad con la parte 15 del reglamento de la FCC . Estos lmites estn diseados para proporcionar proteccin razonable contra interferencia dai-
na en una instalacin residencial . Este equipo genera, usa y puede emitir energa de radio-
frecuencia y, si no se instala y usa de acuerdo con las instrucciones, puede causar interferencia daina a las comunicaciones de radio . 52US - ES IB_289974_SFSS2B2_LB9.indb 52 25.08.17 09:30 SFS 52 B2 Sin embargo, no hay garanta de que ocurrir interferencia en una instalacin en particular . Si este equipo causa interferencia daina a la recepcin de radio o televisin, lo cual puede determinarse al apagar y encender el equipo, se aconseja al usuario intentar corregir la inter-
ferencia mediante una o ms de las siguientes medidas:
- Reoriente o reubique la antena receptora .
- Incremente la distancia entre el equipo y el receptor .
- Conecte el equipo en una toma de un circuito elctrico diferente a la que est conectado el receptor .
- Consulte al distribuidor o a un tcnico expe-
rimentado en radio o televisin para solicitar ayuda . US - ES53 IB_289974_SFSS2B2_LB9.indb 53 25.08.17 09:30 SFS 52 B2 Garanta limitada de 3 aos Lo que cubre la presente garanta La garanta incluye:
Daos, quebraduras o incapacidad para funcionar debido a defectos . Daos que no hayan sido causados por el desgaste propio del uso o por no seguir las instrucciones de seguridad y mantencin incluidas en el manual para el usuario . Lo que no cubre esta garanta La garanta no cubre daos causados por:
El desgaste propio del uso del producto, incluidas las partes frgiles (como interrup-
tores, piezas de vidrio, etc .) . Uso o transporte no indicado del producto . Desatencin a las instrucciones de seguri-
dad y mantencin . Accidentes o causas de fuerza mayor (e .g . relmpagos, incendio, inundacin, etc .) . Manipulacin mal intencionada del producto
(retirar la cubierta, tornillos, etc .) . 54US - ES IB_289974_SFSS2B2_LB9.indb 54 25.08.17 09:30 SFS 52 B2 La presente garanta tampoco cubre daos indirectos o emergentes . Sin embargo algunos estados no permiten la exclusin o limitacin de daos indirectos o emergentes, por lo que dicha exclusin o limitacin pudiera no aplicarse en su caso . Perodo de cobertura y resolucin de la garanta La garanta es vlida por 3 aos a partir de la fecha de compra . La empresa, segn lo estime conveniente, devolver el dinero o repondr el producto . La empresa no:
Dar inicio a un nuevo perodo de garanta al hacerse el cambio del producto . Reparar el producto . US - ES55 IB_289974_SFSS2B2_LB9.indb 55 25.08.17 09:30 SFS 52 B2 Cmo se tramita la garanta?
Recomendamos que primero usted:
Llame al Servicio de atencin al cliente al 1 (844) 543-5872 . Visite el Portal de atencin al cliente en www .lidl .com/contact-us Visite una de nuestras tiendas LIDL en caso de cualquier inquietud . A fin de acelerar el trmite de la garanta, tenga a bien contar con lo siguiente:
Recibo de venta original que incluya la fecha de compra . Producto y manual en su empaque original . Descripcin del problema . Qu debe hacer usted para mantener la garanta vigente?
Guardar el recibo original . Seguir todas las instrucciones para el uso del producto . No realizar ninguna reparacin ni altera-
cin al producto . 56US - ES IB_289974_SFSS2B2_LB9.indb 56 25.08.17 09:30 SFS 52 B2 De qu manera influyen las leyes estata-
les con esta garanta?
La presente garanta le otorga derechos legales especficos, y pudiera usted contar con otros derechos los cuales varan de un estado a otro . Todas las garantas implcitas se encuentran limitadas a la duracin y trminos de la presente garanta . Algunos estados no permiten limitaciones al perodo de tiempo y trminos de la garanta implcita, por lo que dichas limitaciones pudieran no aplicarse en su caso . Importador LIDL US LLC . ARLINGTON VA 22202 US - ES57 IB_289974_SFSS2B2_LB9.indb 57 25.08.17 09:30 SFS 52 B2 58US - ES IB_289974_SFSS2B2_LB9.indb 58 25.08.17 09:30 SFS 52 B2
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2017-11-15 | 433.92 ~ 433.92 | DSC - Part 15 Security/Remote Control Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2017-11-15
|
||||
1 | Applicant's complete, legal business name |
Lidl US, LLC
|
||||
1 | FCC Registration Number (FRN) |
0027341197
|
||||
1 | Physical Address |
3500 S. Clark Street
|
||||
1 |
Arlington, Virginia 22202
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
L******@ul.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2AJ9O
|
||||
1 | Equipment Product Code |
SFS52B2
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
M**** H****
|
||||
1 | Title |
Sr. Manager Quality Assurance
|
||||
1 | Telephone Number |
703-5********
|
||||
1 | Fax Number |
703-8********
|
||||
1 |
m******@lidl.us
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
UL Verification Services (Guangzhou) Co., Ltd,
|
||||
1 | Name |
S****** L******
|
||||
1 | Physical Address |
Building 10, Innovation Technology Park
|
||||
1 |
Dongguan, 523808
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
0769-********
|
||||
1 |
s******@ul.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSC - Part 15 Security/Remote Control Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless doorbell for socket | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
UL Verification Services (Guangzhou) Co., Ltd.
|
||||
1 | Name |
S****** G****
|
||||
1 | Telephone Number |
+86 0********
|
||||
1 |
S******@ul.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15.231 | 433.92000000 | 433.92000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC