FCC ID: 2AJ9O-HG3329 Wireless surveillance camera outdoor IP 66USA

Wireless APP Camera Installation and Operating Instructions Model: WAPP-MS Version 1.0 PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT AND KEEP THIS MANUAL FOR FUTURE REFERENCE. The state of art WAPP camera is capable of deliver high quality Digital High Definition (HD) video to your smart-mobile device(s), which would require higher internet bandwidth. Due to your local internet environment condition, your mobile device(s) may display black-screen or temporary disconnect to the WAPP camera.

* Make sure the WAPP camera is operating with sufficient internet bandwidth, 1Mbps (upload/

download speed) is suggested.

* For best performance, the smart-mobile device(s) need to be on Wi-Fi or 4G mobile network in order to receive maximum download speed.

* When the internet transmission is low, your WAPP APP will automatically switch to Relay Mode:

By adjusting to Better Streaming in the system setting section may improve the WAPP APP performance.

* Your internet bandwidth is limited. For best performance, try to avoid more than two users connecting to the WAPP camera simultaneously.

* Make sure your smart-mobile device(s) is equipped with up-to-date technology, 1.5GHz dual core processor or equivalent is suggested.

* If the signal strength of your Wi-Fi router is weak, there are several ways to improve transmission:

Change router/camera relative position to receive better signal. Use wire Ethernet cable on the WAPP camera to establish connection between WAPP camera and your router. Use Wi-Fi repeater/extender to maximize the service range of your Wi-Fi route. Switch your router to 11b/11g mode in order to improve router service range. Purchase extension cable or high gain antenna for your camera from the WAPP vendor.

* Please make sure the memory card used is CLASS10 rated. CONTENTS Introduction .................................................................................................... 2 Wireless Devices Operating Range ..........................................................................2 Important Safety Precautios .....................................................................................2 Kit Content ...................................................................................................... 4 Safety and Installation Tips ........................................................................... 5 Camera Overview ........................................................................................... 6 Setup Your Camera ......................................................................................... 7 Install Your Camera ........................................................................................ 9 APP Introduction ......................................................................................... 10 Live View / Snapshop / Recording .............................................................. 14 Viewing Your Snapshots .............................................................................. 15 Playback Your Videos .................................................................................. 15 Advanced Setting ......................................................................................... 19 Admin Password .....................................................................................................20 Email Alert ..............................................................................................................20 Time Zone ..............................................................................................................21 Daylight Saving .......................................................................................................24 Device Security Code .............................................................................................24 Video Settings ........................................................................................................24 Wi-Fi Settings .........................................................................................................25 Sensitivity Setting ...................................................................................................26 Email Setting ..........................................................................................................26 SD Card Setting ......................................................................................................27 Overwrite SD Card ..................................................................................................27 Profile Setting .........................................................................................................27 Device Information ..................................................................................................27 Trouble Shooting .......................................................................................... 28 Product Specification .................................................................................. 31 Storage Media Management ........................................................................ 32 Appendix: Compatible List .......................................................................... 33 1 INTRODUCTION PLEASE READ BEFORE YOU START Always use discretion when installing CCTV equipment, especially when there is perceived policy. Enquire relevant local regulations applicable to the lawful installation of video recording/

surveillance. Third party consent may be required. WIRELESS DEVICES OPERATING RANGE Ensure the signal reception viewed from the wireless camera(s) is the best possible reception between the camera(s) and the Wi-Fi router. If necessary, reduce the distance between the camera(s) and the Wi-Fi router to improve overall system performance. Wireless Color Camera Recordable CCTV Kit operating on a secure digital 2.4GHz frequency which could greatly reduce interference from product such as wireless routers, cordless phones or microwave ovens. I IMPORTANT SAFETY PRECAUTIONS Damages caused by non-compliance with this operating manual will void the warranty! We will not assume any liability for damages to items or persons caused by improper handling or non-

compliance with the safety notices! Any warranty claim will be null and void in such cases. 1. Do not drop, puncture or disassemble the camera; otherwise the warranty will be voided. 2. Avoid all contact with water, and dry hands before using. 3. Never tug on the power cords. Use the plug to unplug it from the wall outlet. 4. Do not expose the camera to high temperature or leave it in direct sunlight. Doing so may damage the camera or cause camera temporary malfunction. 5. Use the devices with care. Avoid pressing hard on the camera body. 6. For your own safety, avoid using the camera or power off the camera when there is a storm or lightning. 7. Remove the power adapter during long periods between usages. 8. Use only the accessories and power adapters supplied by the manufacturer. 9. To meet the regulations pertaining to parental responsibility, keep the devices out of the reach of infants. 10. Check power cables, do not get crushed or damaged by sharp edges whenever the devices are in operation. 2 FCC Compliance Statement: This device complies with Part 15 of the FCC rules. Operation is subjected to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The distance between user and products should be no less than 20cm Products with CE Marking comply with EMC Directive (2014/30/EU);

Low Voltage Directive (2014/35/

EU); RED (2014/53/EU); ROHS Directive (2011/65/EU) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Norms:

EMC: EN 301 489 LVD: EN 60950 Radio: EN 300 328 FCC/CE WARNING This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of the FCC rules and ETSI(EN) 300328. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does interference to radio or television equipment reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Move the equipment away from the receiver. Plug the equipment into an outlet on a circuit different from that to which the receiver is Consult the dealer or an experienced radio/television technician for additional suggestions. connected. You are cautioned that any change or modifications to the equipment not expressly approved by the party responsible for compliance could void your authority to operate such equipment. DISPOSAL If the camera system no longer functions or can no longer be repaired, it must be disposed of according to the valid statutory regulations. Disposal of spent batteries/accumulators:

You are required by law (Battery Ordinance) to return all spent batteries and accumulators. Disposing of spent batteries/accumulators with common household waste is prohibited! Batteries/accumulators that contain hazardous substances are marked with the symbols on the side. These symbols indicate that it is prohibited to dispose of these batteries/accumulators in the household waste. The abbreviations for the respective heavy metals are: Cd=cadmium, Hg=mercury, Pb=lead. You can return spent batteries and accumulators that can no longer be charged to the designated collection points in your community, outlets or wherever batteries or accumulators are sold. Following these instructions will allow you to fulfill the legal requirements and contribute to the protection of our environment!

3 KIT CONTENT Wireless App Camera Splitter Cable Camera Antenna Screw Pack Mounting Template x 1 x 1 x 1 x 1 Power Adapter Quick Start Guide x 1 x 1 x 1 Tools Required:

Electric drill 5mm masonry drill bit 15mm masonry drill bit No. 2 Philips screwdriver For best system performance:

- iOS: iPhone5 / iPad2 / Mini iPad with iOS 7.0 or above.

- Android: 1.5G dual core processor dual core procesor with 1G Ram or above.

- Storage: Class 10 memory card.

- Bandwidth: 1Mbps or above upload/download speed suggested. 4 SAFETY AND INSTALLATION TIPS Do not attempt to open the units with the power adaptor plug connected to avoid any risk of personal injury. When installing CCTV camera(s), always follow manufacturer's advice when using power tools, steps, ladders, etc. and wear suitable protective equipment (e.g. safety goggles) when drilling holes. Before drilling holes through walls, check for hidden electricity cables and water pipes. The use of cable/pipe detector is advisable. It is also advisable to avoid exposing any cameras to extreme weather conditions (e.g., under a gutter which is prone to any water leaks). When installing any cameras with this unit, it is advisable to use cable conduit to protect any video/power extension cables from being exposed externally and to prevent/reduce the chances of the cables being tampered with. After drilling any hole though an external wall for a cable, ensure the hole is sealed up around the cable using a sealant to prevent drafts. To prevent a fire or electrical shock hazard, do not attempt to open the housing while the unit is exposed to rain, water or wet conditions. There are no user serviceable parts inside. Refer servicing to qualified service personnel. Avoid pointing the camera(s) directly at the sun or any bushes, tree branches or moving objects that might unnecessarily cause the camera to record. 5 CAMERA OVERVIEW Light Sensor LENS SD Card Slot Reset Button Antenna RJ45 Cable Note:

Press and hold the reset button on the power cable for 5 seconds and the system will start the reset process. The system will restore to factory default and you may start the Wi-Fi setup. 6 SETUP YOUR CAMERA Follow the instructions below to help configure your camera for initial use. 1. APP download Download and install the "OMGuard HD" app from Google PlayTM ot the App Store. Then launch the app. For iOS For Android 2. Power up the camera Connect your smartphone to your home netwotk. Connect camera to the Wi-Fi router using Ethernet cable. Power on the camera, which will take 40 seconds to connect to the router. When its done, green LED will stay ON. After power up the camera, wait about 1 minute until the camera restart. Tap next when you see the LED blinks 1 long and 2 shorts blinks constantly. Ethernet Cable Router Power Cable Power Adapter 7 3. Add a new camera 1. Tap "+" to add a new camera. 2. Tap "search" button to search available camera(s) which connecting to the Wi-Fi router, or scan the QR code label on the back of the camera to bring up the DID information. 3. Name your camera and enter the default password 123456. Later, app will request you to modify default password to private password.

(iOS)

(Android) 4.Wi-Fi Setting setup In the Wi-Fi setting section, enter default password:123456. Choose the appropriate Wi-Fi router on your local network. The Camera will offline for around 40 seconds to reboot for Wifi connection. When camera connects to Wi-Fi router correctly, the Green LED will stay ON. 8 INSTALL YOUR CAMERA 1. The best location is close to proximity of power outlet that the power cord can reach. 2. Stick the mounting template onto the wall, eave or roof. For concrete, brick or plywood siding, use 6.3mm (1/4") drill bit to drill 3 pilot holes and insert anchors. 3. Use 16~20mm (5/8") drill bit to drill cable hole through the wall. If the wall is thick, you may need to drill another hole in the interior. 4. Feed the camera cable into the hole and pull it out from the interior, use fish rap to pull cable through the wall if needed. caulk the hole properly to avoid water damage. 5. Connect camera cable to spliter (single way side). Connect Entheret cable and power cprd to splitter (2 way side). 6. Connect Ethernet cable to wifi router and plug in camera powe supply. 7. After 1 minute, you can watch video form app now. Note:

Before mounting the camera, install the memeory card if you prefer recording video to local storage. 9 APP INTRODUCTION Main Page The MAIN PAGE section offers user an overview for all registered camera(s), including camera status (connected/disconnected). User can quickly access the camera(s) in the list. When multiple cameras are registered, scroll down to locate the registered camera for access.

(iOS)

(Android) The ADD CAMERA icon allows you to register additional camera(s) to the system. The system supports up to 3 concurrent user connections. In the CAMERA SETTING section you will allow to (1) configure system setting,

(2) unregister camera from the APP and (3) enter event list for recorded video file(s) playback. Tap the CAMERA SETTING icon to enter/exit CAMERA SETTING. 10 Tap the CAMERA SETTING icon. The following icons appear on the panel.

(iOS)

(Android) Tap the ADVANCED SETTING icon to setup camera configuration. (Please refer to

"Advanced Setting" for detail). Tap the DELETE icon to remove the camera connection. Tap the EVENT LIST icon to check or playback the recorded events. (Please refer to

"Playback Your Video" for detail). The INFORMATION icon allows you to enable PIN lock, push notification function and check the App information. 11 SETUP PIN LOCK

(iOS)

(Android) If you enable PIN Lock, the user will be asked to enter the PIN code when you launch the APP. 1. Enable the Enable lock when starting function. Then enter your PIN code. 2. Confirm your PIN code again. Note:

If you forgot your PIN code, please uninstall the APP and reinstall it on the mobile device. NOTIFY (PUSH NOTIFICATION) The WAPP camera supports motion detection function. When any event is detected in the camera site, youll receive push notification on the mobile devices for the event recognized by the camera. For iOS If you want to enable/disable it, please follow the steps on your iOS mobile device:

1. Launch Settings from your Home screen. 2. Tap Notifications. 3. Scroll down to find OMGuard HD APP and tap on it. 4. Switch the toggle to ON/OFF in Notification Center. Note:

It takes time for the changes to take effect in iOS, normally within 2 hours. 12 Note:

The internet connection and wireless network interference may influence the performance of push notification service.

(iOS)

(Android) 13 LIVE VIEW / SNAPSHOT / RECORDING Tap to take snapshot image(s) of the video. The captured snapshots will be stored in your mobile device. Tap to turn ON/OFF the volume. Tap to Start/Stop recording. The recorded video file will be stored in the memory card of your camera. Tap to return to the main page. The APP allows users to have access to live video. User can take snapshot image(s) and record the live video. If youre using the indoor model, you can also choose the color tone according to the lighting condition. By default, the APP applies the indoor option with warm-yellow color tone for the indoor models. You can also choose the outdoor option in the advanced setting for cool-white color tone if it best fits your viewing environment. It is not necessary to change this setting for outdoor models. 14 VIEWING YOUR SNAPSHOTS For iOS You snapshots will be named with the time stamp and saved into the Camera Roll location of your mobile device. For Android You snapshots will be named with the time stamp and saved into the Photo Gallery > snapshot folder on your mobile device. PLAYBACK YOUR VIDEOS The recorded video file(s) on your camera is automatically saved to the memory card inserted in your camera. You can remotely access the file(s) for playback via your mobile device. Tap the CAMERA SETTING icon on the main page.

(iOS)

(Android) 15 Tap EVENT LIST icon and the Date-Time filter would appear. User may define the period for system to display all available recorded file(s) for playback. During the playback, tap the PAUSE icon to pause / resume the video. MUTE to deactivate/

activate the audio function and tap the BACK icon to return to the event list section. You may also review recorded video file(s) with your PC. For best performance, please use Free Video Converter from http://www.freemake.com/free_video_converter/, or Video LAN from http://www.videolan.org/. The video is using FFmpeg codes and is H.264 compression method. Users local network environment condition (example: upload/download speed) may cause improper video playback (black screen). When it happens, please leave the playback mode and try again at later time. APP layout may vary depending on the display panel size of your mobile devices. Please refer to the release note from the APP Store/Google Play for more details. 16 To Download / Delete the video file(s) in the EVENT LIST section, please follow the steps below:

DOWNLOAD Long press the video clip to download the file onto your movbile device. Note:

During the download process, the system will stop both the live view and recording functions. APP will automatically inform any user accessing the camera that the system is busy and the connection has been terminated. 17 This function helps user to easily withdraw the recorded file(s) from the memory card. It is strongly suggested to download the file(s) at your home Wi-Fi network (WLAN), meaning the mobile device(s) is connecting to the same Wi-Fi router as the camera. Minimum bandwidth requirment is 1Mbps (upload/

download). Download process may be force stopped if the bandwidth becomes too slow and cannot continue. Note:

For iOS system, please use "Oplayer Lite" APP for playback downloaded video files(s). You can find "Oplayer Lite" from App Store (free of charge) Note:

For Android system, please use "MX Player" APP for playback downloaded video file(s). You can find "MX Player" from Google Play (free of charge). If you are experiencing scattering video image, please switch the decoder function of the MX Player to "S/W Decoder". DELETE First select the file(s) by tapping the file name, following by taping on the Trashcan icon to delete selected file(s) Multiple files can be selected for delete. Check the video clip Then tap the trash can icon 18 ADVANCED SETTING This chapter explains the advanced settings for administrator. Administrator is the one who owns the administration password and has the full control to the WAPP camera. The administrator can access all WAPP functions and settings, while general users can receive the surveillance images for live view/screen capture/video recording and may not manage the camera settings. Email Alert Admin Password The security code required to enter Advanced Setting for system setting management. Enable / Disable receiving E-Mail alert (after system detecting motion) on your mobile divice. Please make sure you have setup the E-Mail Setting correctly and have activated Motion Detection function. Setup the appropriate time zone . Time Zone Daylight saving Turn ON/OFF the daylight saving function. Device Security Code The password required for remote access. Video Setting Wi-Fi Setting Sensitivity Setting Email Setting SD Card Format Profile Setting Configure the video quality and local power frequency. Manage your Wi-Fi Network. Setup the camera sensitivity for motion detection. Setup your email account for E-mail alert . Format/Setup the SD card. Save the current camera settings and apply the settings to other cameras. Check the App and API Kernel version. Device Information Note:

It may take more than one minute for some routers to update the registered devices. When you complete advanced settings and return to device list, please wait for a while allowing your router to finish the camera registration. 19 ADMIN PASSWORD The Admin Password is a specific security code for administrator to change the advanced settings. The default admin password is 123456. Please use this function to change the default admin password into your personal admin password. For the protection of your system configuration, every time you change the advanced settings, you need to enter the admin password. Please change the admin password periodically. Note:

If you forgot your admin password, please long press the reset button on the camera DC jack for 5 seconds to restore the password into factory default value 123456 (please refer to the Camera Overview section). All settings will be restored to factory default. You will need to configure your camera from the start. EMAIL ALERT The camera supports the motion detection function, which is capable of detecting movements within the camera view, following with notifying user the sudden event with push notification and/or email alert, system can also begin recording. When motion detection is enabled and system detects movement:

- System will begin recording.

- With Push Notification enabled, system will send out notification message to users mobile device.

- With Email Alert enabled, system will send out Email to alert user the event. Function Email Alert Setting ON Push Notification ON Detection OFF Action (when movement is detected) Camera: Start video recording Email account: Email alert Camera: Start video recording Mobile Device: Text notificationMotion Camera: Manual Recording Email account: No action Mobile Device: No action Note:

By default, the system has been limited to send out the email alert every 1 minutes to prevent overloading users email account. 20 TIME ZONE The drop-down list shows the world time zone. Select the time zone that will work the best for you. If your date/time is during the daylight saving time period, please check the Daylight Saving box to adjust the system time properly. DAYLIGHT SAVING Activate/Deactivate the daylight saving function. DEVICE SECURITY CODE The Device Security Code is a specific security code to access the camera. The default password of the camera is 123456. Please use this function to change the default password into your personal security code. 1. Type in the old password. 2. Type in the new password and confirm the new password again. 3. Tap OK to save the setting. Note:

1. Change password in system information page accordingly. 2. If you forget the Device Security Code, please hold down the reset button (P.8) for 5seconds to reset the system to factory default. All settings will be restored to factory default. You will need to configure your camera from the start. VIDEO SETTINGS This section allows you to configure the video quality and environment mode. Video Quality The Video Quality setting section allows you to adjust the quality of the video streaming. By selecting better video image will allow you to view high resolution image. By selecting better streaming will allow the video to display more smoothly (quality depend on local internet environment). Only select better image when you have sufficient bandwidth and updated mobile device(s). Please refer to P.4 for system requirment. 21 Envir onment Mode The Environment Mode settings allows you to select the power line frequency used at the location of WAPP camera. The power line frequency varies depending on geographic region. It may cause image flicker if wrong frequency is selected. Please check with local authorities for proper setting. There are two type video color tone, user can change the video color tone between warm-

yellow(indoor) and cool-white (outdoor) Low Light Enhancement The Low Light Enhancement Mode is for improving the night view video image by providing 5 levels to select from (5 = brightest). WI-FI SETTING The Wi-Fi setting allows you to choose the wireless connection and setup the Wi-Fi environment. When you tap the Manage Wi-Fi network button, the system automatically scans the nearby network and shows the available Wi-Fi routers in the drop-down list. Choose the appropriate Wi-Fi router and enter the Wi-Fi router password if necessary. Due to security concerns, it is suggested to use the WPA/WPA2/ WPA2-PSK protocol for Wi-Fi network. Note:

1. When the Wi-Fi connection is completed and you unplug the Ethernet cable, the camera will reboot and it will take several minutes to establish the connection. Please re-launch the APP when you see the green signal indicator lights up. 2. The WAPP camera is designed to work with the legal Wi-Fi channels in your region. Please refer to your Wi-Fi router manual to choose an appropriate channel for WAPP camera. 3. If camera fails to connect to the Wi-Fi router, please hold down reset button for 2 seconds to reset the system and repeat register process again. 22 SENSITIVITY SETTING This defines the camera parameter for motion detection. Detection Mode PIR is hardware-based biomass detection. SOFTWARE use advance software analysis to trigger motion alarm. In general, the performance of any PIR depends on the environment, specially the temperature. At low temperature the accuracy of PIR may suffer. If you are experiencing such, please switch to the built-in software motion detection to improve the situation. Motion Detection (available for Software Mode ONLY) HIGH Suitable for detecting smaller object(s) within 5 to 6 meters LOW Suitable for detecting larger object(s) within 3 to 5 meters Note:

The HIGH/LOW setting for Motion Detection only takes effect when user chooses SOFTWARE in detection Mode. EMAIL SETTING The email setting allows you to configure the email environment, email account and password. Gmail account is suggested. Click the Use SSL check box will transmit the data in encryption. This setting requires the Simple Mail Transfer Protocol (SMTP) configuration. Most ISPs use the SMTP method to transfer outbound mail via the internet. Only use the SMTP that supports SSL. Gmail Setting (suggested) SMTP Server SMTP Port Username Password Email to smtp.gmail.com 465 XXX@gmail.com XXXXXXXX XXX@gmail.com Enter the gmail SMTP server Enter the SMTP port 465 Enter your email address Enter the password for this gmail account Enter the email address for the recipient who receives the email alert. 23 SD CARD SETTING Formatting your memory card will ERASE all the data from it and you will not be able to get the data back. Please back up your video files BEFORE formatting the memory card. Note:

The system is optimized to Class 10 memory card. Memory card with lower specification will decrease the recording and playback function efficiency. During format process, all recording & viewing will stop until format process completes. OVERWRITE SD CARD This function will overwrite the oldest files when the micro memory card is full. Turning on this function will enable the system to start overwriting the old files when the available memory card capacity is not enough. This ensures the most up to date video recordings can be saved so that you wont miss any important information. Note:

You will want to reformat the memory card from time to time to ensure the condition of the storage device. Your camera system will not work properly if the memory card become corrupted. PROFILE SETTING This function allows you to save the following customized settings of camera. This is useful if you want to apply the same settings to another WAPP camera quickly. You wont have to make all settings for each camera manually. Time zone Vido setting Sensitivity setting Email setting Overwrite Setting DEVICE INFORMATION This section shows the device information about the camera, including device version, total size and available size of the memory card. 24 TROUBLE SHOOTING IF SOLUTION The APP cannotfound the camera Make sure your network supports the DHCP protocol. Make sure the camera and your mobile device connect to the Wi-Fi router is not shown in the drop down list same Wi-Fi router for the first setting. Make sure the Wi-Fi router is activated. Make sure the camera is properly powered on. Use the ADD CAMERA function to manually add the camera. Make sure SSID broadcasting function is enabled in the Wi-

Fi router. Consult your Wi-Fi router manufacturer for the settings if necessary. Change the wireless security protocol of your Wi-Fi router into WPA/WPA2/WPA2-PSK. Due to security concerns, WEP protocol is not suggested for some Wi-Fi routers. Note:

WPA/WPA2/WPA2-PSK encryption protocols are newer and more effective security standards for wireless networks than the older and less-secure WEP protocol. No image appears Make sure the power adaptor is not damaged or defective and Low wireless signal Poor image quality Motion detection is not working or over-react plugged into an electrical outlet with power. Relocate the camera to obtain the best reception of wireless signals. Make sure the camera is properly configured in App. Make sure the mobile device is connected to 3G/4G/Wi-Fi properly. Wireless devices such as wireless home stereo system may reduce the signal strength. Leave as much space as possible between the camera/mobile device and these wireless devices. Clean the camera lens using lens cleaning cloth. Spots or dust on the lens can also cause image quality problems. Make sure the sensitivity setting is turned ON (please refer to the Sensitivity Setting section). In motion detection mode, a moving object within the camera viewing angle is necessary to trigger the motion sensor for recording 25 The APP cannot record any video clips Make sure the SD card has been correctly inserted Make sure the motion detection function has been enabled. (please Email alert is not working Bright white spots appear at night time refer to the Sensitivity Setting section). Please format the SD card when it is used for the first time (please refer to the SD Card Format section) Make sure you are using Class 10 rated memory card. Make sure the email alert function is enabled (please refer to the Email Alert section). Gmail account is suggested for the email alert function. Make sure you have setup the system configuration as suggested in the Email Alert section. Make sure the email address is has been correctly entered. The camera's infrared LEDs produce invisible light that reflects off surfaces such as glass.Install the camera on the other side of windows or place the lens flush against the surface to improve the night vision. It is suggested toinstall camera(s) under well-lit area. Note:

Please check the environment rating (Ingress) of the camera(s) before installing outdoors. Memory card error Make sure the memory card is correctly inserted and formatted. Use the provided memory card within the package to ensure proper operation. Make sure your are using Class 10 rated memory card. Note:

Please backup the data before formatting. Format function will erase all the data on the memory card. 26 Wrong data and time are shown Wrong date and/or time will result in unexpected record schedule. Make sure youve selected the correct time zone (please refer to the Time Zone section). Confirm the system date/time of the mobile device to ensure correct operation. System will clock itself when connect to the internet. Make sure the system is connected properly to the internet. You may use your mobile device to access the system to see if remote view is f unctioning properly. 27 PRODUCTION SPECIFICATION IEEE 802.11 b/g/n Ethernet (10/100 Base-T/Base -TX); Wi-Fi TCP/IP, UDP, SMTP, NTP, DHCP, ARP 3 concurrent sessions WPA /WPA2/WPA2-PSK (TKIP, 128 bit AES) Mega pixel CMOS 3dBi Dipole Weather resistance metal IP66 Indoor (50Hz); Indoor (60Hz) Memory card, Max. 128GB (not included in the package) H:110, V: 60 4.0mm 1~8 lux 6 IR LEDs with IR switcher 15 meters H.264 HD 1920x1280 1080P@30 FPS Networking Parameter Wireless Technology Network Connection Network Protocols Simultaneous Viewers Security Camera Parameter Image Sensor Antenna Housing Environment Rating (Ingress) Light Source Environment Local Storage Viewing angle Lens Min. Illumination Number of LEDs IR Distance Video Audio Parameter Image Compression Image Resolution Recording Frame Rate Supported Mobile Device iOS requirement Android requirement Hardware requirement iPhone 5 / iPad Mini / iPad 2 with iOS 7.0 or above Android 4.4X or above 1.5GHz dual core or above 1GB or above internal memory General Parameter Power Requirements Operating Temperature 100~240V switching power supply DC 5V 1.5A

-10C~+50C 28 STORAGE MEDIA MANAGEMENT Micro SD Card Capacity

(Class 10) 8G 32G 64G 128G Event 400 1600 3200 6400 Minutes 180 320 760 1440 29 APPENDIX: COMPATIBLE LIST WiFi Compatible Router List Brand ASUS BUFFALO BUFFALO Cisco D-Link Huawei INTELBRAS NETGEAR NETGEAR Tenda TP-link Product Name RT-N53 WIR-HP-C300NH2 WZR-HP-G450 ERT120 DIR-816L WSR20 WRN300 Wndr3700v4 WGR614 FS395 TL-WR941N 30