FCC ID: LM6-LF10WQWC Life Fitness 10W Wireless Charger

Life Fitness 10W Wireless Charger User Manual V1.1 9525 BRYN MAWR AVENUE ROSEMONT IL 60018 | 847.288. 3300 | LIFEFITNESS.COM For your safety, please read this manual carefully before using and integrating this product. 1. Overview Life Fitness 10W Wireless Charger is a universal wireless charging module that can be easily integrated to the various equipment host embedded board. The equipment installed with the module allow user to simply place their mobile phone on its surface to charge wirelessly. Wireless Charging Surface LED Indicator Power Connector Regulatory Labeling Location 10W Wireless Charger User Manual V1.1 2 2. Specification Product Name: Life Fitness 10W Wireless Charger Model No: 1011883-0001 Input: 12V/1.5A (powered via host wire cable 1014289-0001) Output Power: 10W Max Operating Frequency: 120KHz ~ 130KHz Module Dimension: 120mm (L) x 65mm (W) x 10.6mm(H) Operating Temperature: 0 C ~ 40 C 3. Installation and Integration Instruction 1. Install the wireless charger with coil facing toward the charging surface of the equipment and secure the wireless charger through the four 3.5mm mounting hole. 10W Wireless Charger User Manual V1.1 3 2. Plug one end of the power wire cable (P/N: 1014289-0001) to the power connector and the other end to the host embedded board. 3. The wireless charger blue LED indicator should come on for 1s when power is supplied to the module. 4. Place a mobile device that is compliant to WPC (Wireless Power Consortium) standard on the wireless charging surface to start charging automatically. 5. When the charger is in normal state and start charging, the blue LED indicator should be constantly on. Initialization Standby Charging Error/Fault Wireless Charger State Blue LED1 Blue LED 2 On (for 1s) On (Constant) Off Off 10W Wireless Charger User Manual V1.1 4 4. Precautions Do not attempt to disassemble or repair this product. It can cause electric shock and damage to the circuit. The product should be kept in dry and ventilated environment, do not store in an area of high humidity and high temperature. Do not use the wireless charger in severely hot, humid or corrosive conditions. Do not place cards equipped with a magnetic strip or chip (such as ATM and credit cards) on the charging surface when charging to avoid possible card reading failures. This wireless charger is specifically designed for Life Fitness equipment integration used, so use this module as it original purpose only. 5. Regulatory Compliance Notices FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is Subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not explicitly approved by the party responsible for compliance could void the user's authority to operate this equipment. Note: this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. 10W Wireless Charger User Manual V1.1 5 These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and candidate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected. RSS Compliance Statement This device complies with Industry Canadas license-exempt RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the device This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 10 cm surrounding the device and 10 cm above the top surface of the device must be respected. 10W Wireless Charger User Manual V1.1 6 Cet quipement est conforme Canada limites d'exposition aux radiations dans un environnement non contrl. Au cours de l'opration de l'appareil sur une distance de 10 cm autour de l'appareil et de 10 cm au - dessus de la surface suprieure de l'appareil doit tre respect. 10W Wireless Charger User Manual V1.1 7

FAMILY OF BRANDS Ot-LA tstii, FCC ID: LM6-LF10WQWC IC: 23315-LF1OWQWC ANATEL: HHHHH-AA-FFFFF 1011883-0001 Life Fitness 10W Wireless Charger C 0) ronan R00 Py

DATE : 2020/12/16 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: LM6-LF10WQWC Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:

Schematics Block diagram Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this By:

Margaret Wang 2020/12/16 Signature Title: Regulatory Compliance Manager On behalf of :

Life Fitness Printed

Cover Letter- Wireless Charger Approval Date: 2020/12/16 To whom it may concern:

We have declared below featured for FCC equipment authorization as an Inductive wireless power transfer applications approval ( KDB 680106 D01v03 section 5,b). Device FCC ID: LM6-LF10WQWC, IC: 23315-LF10WQWC Requirements

(1) Power transfer frequency is less than 1 MHz.

(2) Output power from each primary coil is less than or equal to 15 watts.

(3) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils. Pass,

(4) Client device is placed directly in contact with the transmitter.

(5) Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion).

(6) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Result Pass, The Device operates at a frequency range is 120KHz ~ 130KHz Pass, The primary coil is 10watts

- The transfer system includes charging systems with multiple primary coils.

- They are able to detect one coil, but the device does not allow 3 coils to charging at same time. Pass, Client device is placed directly in contact with the transmitter. Pass, Mobile exposure conditions only Pass, H-field strengths at 15cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50%

of the MPE limit. Dated this 2020/12/16 By:

Margaret Wang Signature Title: Regulatory Compliance Manager Printed On behalf of :

Life Fitness

DATE 2020/12/16 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification (FCC ID: LM6-LF10WQWC ) Authority to Act as Agent On our behalf, I appoint Chenz Ker (MRT Technology (Taiwan) Co., Ltd./ No.38 Fuxing 2nd Road, Guishan Dist., Taoyuan City, Taiwan 33377). to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commissions regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with Life Fitness /

10601 W. Belmont, Franklin Park, Illinois 60131, United States Dated this Agency agreement expiration date:

By:

2021/5/15 Margaret Wang 2020/12/16 Signature Title: Regulatory Compliance Manager On behalf of :

Life Fitness Printed