FCC ID: WWE-2SKSK1845 SKDY KILO

MANUAL (US) FRONT PANEL KILO XT BOOMING BASS IN A PORTABLE PACKAGE CARABINER CLIP VOLUME DOWN /

PREVIOUS TRACK POWER ON / OFF, TWS PAIRING, BLUETOOTH PAIRING, PLAY / PAUSE VOLUME UP /

NEXT TRACK CONTOURED BUMPER LED BATTERY INDICATOR USB-C CHARGING PORT FUNCTIONS Power ON / OFF:

Press and hold the O button for 2s. If not connected to a BT device or connected but idle (not playing audio) speaker will turn OFF automatically after 15 min. Play / Pause:

Press the O button once to play or pause audio. Volume up:

Press + button to increase the volume. Volume Down:

Press - button to decrease the volume. Next Track:

Press and hold + button for 2s to skip track. Previous Track:

Press and hold - button for 2s to go to last track. True Wireless Stereo Pairing:

Press O button 3 times to pair any two SKDY Kilo speakers to play audio in stereo. Status LED blink cyan color while pairing. When paired Status LED will be ON cyan to indicate Right channel and ON yellow to indicate Left channel. Exit True Wireless Stereo Mode:

Press O button 3 times to exit TWS pairing. Bluetooth Pairing:

Press O button 4 times to enter BT pairing mode. Speaker will disconnect from any paired BT device and be available to pair to new devices. Speaker will stay in pairing mode for 60 sec, or until connected. Status LED will blink blue while in BT pairing mode. Check Battery Status:

The 4 LED indicators show the battery level. Press and hold + and - buttons together for 1s, for a more accurate battery level indication. A voice prompt will say the battery level. CHARGING Use the USB-C cable included to connect the speaker to an appropriate power source to begin charging. The LED indicators will show battery is charging. When all 4 LEDs are ON the battery is fully charged. Warning:

1. To avoid damage to the speaker and battery, it is important to only use a power source that matches the power requirements listed on the speakers rating label. 2. To avoid overheating, its recommended not to place the speaker in direct sunlight, especially while charging and playing music. Battery status indication (not charging):

0-5% - speaker is OFF 5-10% - 1st LED blinks RED, other LEDs are OFF 10-25% - 1st LED is ON, WHITE, other LEDs are OFF 25-50% - 1st + 2nd LEDs are ON, WHITE, other LEDs are OFF 50-75% - 1st + 2nd + 3rd LEDs are ON, WHITE, other LEDs are OFF 75-100% - All LEDs are ON, WHITE Battery status indication (while charging):

0-25% - 1st LED blinks WHITE, other LEDs are OFF 25-50% - 1st LED is ON, WHITE, 2nd LED is blinking. Other LEDs are OFF 50-75% - 1st + 2nd LEDs are ON, WHITE, 3rd LED is blinking. Other LEDs are OFF 75-99% - 1st + 2nd + 3rd LEDs are ON, WHITE, 4th LED is blinking. Other LEDs are OFF 100% - All 4 LEDs are ON, WHITE TROUBLE SHOOTING Factory Reset:

Press and hold "-" and "+" buttons for 10s to initiate factory reset. The speaker will revert to factory settings and all previously paired devices will be deleted. Status LED will blink alternating between blue and red while resetting. SPECIFICATIONS Bluetooth version5.3 Battery capacity: 1800mAh Charging input: USB-C 5V/1A Play time: Up to 10 hours Charging time: 3 hours Operating range: >10M Rated Power: 7W Connection Type: USB-C Battery Standby Time: 24 Months IPX Rating: IPX7 (water immersion of 1m, for up to 30 min) FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

* RF warning for Portable device:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. According to 15.247(e)(i) and 1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commissions guidelines. According to KDB 447498 (2)(a)(i) This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

1. Lappareil ne doit pas produire de brouillage;

2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Hereby declares that the SKDY Kilo, Model: 2SKSK1845 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Scan the QR code to download the full text of the EU declaration of conformity. hereby declares that the SKDY Kilo, Model: 2SKSK1845 is in compliance with Radio Equipment Regulations 2017 (S.I. 2017 No. 1206, as amended by S.I. 2019 No. 696). Scan the QR code to download the full text of the UK declaration of conformity. The product shall only be connected to a USB interface of version USB2.0 and that the connection to a power USB is allowed. CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. This product is intended for sale and application in a business environment. RED Article 10 2 -This product can be used across EU member states RED Article 10 10 -The product is class 1 product, No restrictions The RF distance between body and product is 0mm. Bluetooth:

Frequency Range: 2402-2480MHz Max. RF Output Power:

For the above information, the Working Temperature and Max. RF Output Power is for EU and UK only. MODEL: 2SKSK1845 1 YEAR WARRANTY Website: Skullcandy.com Support: 877-543-3540 Package include:

(1) Kilo Speaker

(1) Carabiner Clip

(1) Charging Cable

(1) User Manual SCAN FOR SUPPORT 2023 Skullcandy is a registered trademark Marketed and distributed by Lifeworks technology Group LLC., New York, NY 10018. USB Type-A, USB Type-C and USB-C are trademarks of USB Implementers Forum. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Lifeworks Technology Group LLC. is under license. All brands are registered trademarks of their respective companies. *Actual product may differ slightly from images. Made in China. STICKER PACK Double sided pritning - Accordian Style Booklet BACK PANEL

Reference No.: WTX22X11239454W001 Page 1 of 11 ANNEX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the devices expected lifetime. Proposed Label Location on EUT FCC ID Label Location Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn

LIFEWORKS TECHNOLOGY GROUP LLC. 530 7th Ave. 21st Fl., New York, NY 10018, United States Date: 2023-02-06 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911 (d)(5)(i) Filing SUBJECT: FCC Application for FCC ID: WWE-2SKSK1845 To Whom It May Concern:

LIFEWORKS TECHNOLOGY GROUPLLC. certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signatory

[Steve Lee, Director of Quality & Compliance]

LIFEWORKS TECHNOLOGY GROUP LLC. 530 7th Ave. 21st Fl., New York, NY 10018, United States Date: 2023-02-06 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911 (d)(5)(ii) Filing SUBJECT: FCC Application for FCC ID: WWE-2SKSK1845 To Whom It May Concern:

LIFEWORKS TECHNOLOGY GROUP LLC. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, Signatory

[Steve Lee, Director of Quality & Compliance]

LIFEWORKS TECHNOLOGY GROUP LLC. 530 7th Ave, 21st Fl., New York, NY 10018, United States Date: 2023-01-31 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: WWE-2SKSK1845 Confidentiality Request To whom it may concer, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. xX! Block Diagram Tune-Up Information Operational Description Security Information Schematics [1 Software Defined Radio (SDR) Information C) Parts List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

O_ External Photos Test Setup Photos

[1 Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. or For 180 days pursuant to KDB 726920 DO1. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signatory

[Steve Lee, Director of Quality & Compliance]

tp g LIFEWORKS TECHNOLOGY GROUP LLC. 530 7th Ave. 21st Fl., New York, NY 10018, United States h_ s://a_ s.fcec. ov/oetcf/eas/re orts/TestFirmSearch.cfm Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2023-01-31 SUBJECT: FCC Application for FCC ID: WWE-2SKSK1845 To Whom It May Concern:

I, the undersigned, hereby states this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, and will apply the Supplier's Declaration of Conformity procedure to the class B computer peripheral portion of this composite device. I understand the following FCC requirements:

1. Devices subject to the SDoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage: (Select the "accredited"

option to search for FCC recognized accredited test firms.) 2. Pt 2.1077 contains the list of information that must be included in the Supplier's Declaration of Conformity, which must be supplied with each product sold. The SDoC compliance info shall be included in the Users Manual or as a separate sheet. The info must contain the name address and hone number of theres onsible ar which must be located within the United States. According to 2.909(b), the responsible party is either the Manufacturer or ifthe roduct is im orted the Im orter. Sincerely, Signatory

[Steve Lee, Director of Quality & Compliance]

(FCC ID >: WWE-2SKSK1845) LIFEWORKS TECHNOLOGY GROUP LLC. 530 7th Ave. 21st Fl., New York, NY 1 United States DATE: 2023-01-31 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern:

We, the undersigned, hereby authorize Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, LIFEWORKS TECHNOLOGY GROUP LLC. are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Signatory

[Steve Lee, Director of Quality & Compliance]

POWER OF ATTORNEY