FCC ID: UOB-G10TII Wireless Transmitter

RELAY G10TII / G10 / G10S PILOTS GUIDE MANUEL DE PILOTAGE PILOTENHANDBUCH MANUAL DEL PILOTO 40-00-0569 - A www.line6.com/manuals 2020 Yamaha Guitar Group, Inc. All rights reserved. Supplier's Declaration of Conformity 47 CFR 2.1077 Compliance Information Unique Identifiers: Line 6 Relay G10TII, Line 6 Relay G10, Line 6 Relay G10R, Line 6 Relay G10S, Line 6 Relay G10SR Responsible Party - U.S. Contact Information:

Yamaha Guitar Group, Inc. 26580 Agoura Road Calabasas, CA 91302-1921

(818) 575-3600 https://line6.com/

FCC Compliance Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2020 Yamaha Guitar Group, Inc. All rights reserved. Line 6, the Line 6 logo, Relay, Spider, and POD Go are trademarks or registered trademarks of Yamaha Guitar Group, Inc. in the U.S. and/or other jurisdictions. FCC ID: UOB-G10TII IC: 6768A-G10TII System Overview After changing WiFi or other 2.4GHz wireless channels, please dock the transmitter in the receiver for at least 10 seconds. Wireless freedom in any size venue, home, or office Easy to useno setup required Automatically chooses the best channel for true playing freedom Up to 8 hours of playing time per charge Optional manual channel selection for setups with multiple wireless units (Relay G10S only) Best in class sound quality provided by:

24-bit uncompressed digital transmission Best in class DAC and ADC provide super low noise transmission (better than 110dB dynamic range) Up to 50 feet (15 meters) for Relay G10, or up to 130 feet (40 meters) for Relay G10S, line-of-sight range 2.4GHz Wireless Since the Relay is a 2.4GHz wireless system, please avoid placing the receiver next to other RF transmitting equipment. We recommend that you install the G10 or G10S receiver at least 10 feet (3 meters) away from RF transmitters (e.g., WiFi routers). The Relay system automatically selects the best channel when the transmitter is docked (for the G10S receiver, its Channel Selector needs to be set to AUTO). 2 What's in the Box RELAY G10TII Relay G10TII Transmitter Pilot's Guide and End User License Agreement RELAY G10 Relay G10TII Transmitter (not included in G10R Receiver Separate) Relay G10 Receiver USB-A to Micro-USB cable Universal USB Power Supply international AC adapter kit. Pilot's Guide and End User License Agreement

(5V-1A) kit with RELAY G10S Relay G10TII Transmitter (not included in G10SR Receiver Separate) Relay G10SR Receiver 9V DC Power Supply USB-A to Micro USB-B Cable Pilot's Guide and End User License Agreement Getting Started 3. Insert the G10TII transmitter into your instrument. Using the Relay G10TII Transmitter with a Relay G10 or G10S Receiver 1. Insert the Relay G10TII transmitter all the way into the receiver dock to allow the battery to charge. A green steady LED on the transmitter indicates the transmitter is fully charged. 2. While the G10TII is docked in the receiver, the system scans the environment and automatically selects the optimal wireless channel. The G10S receiver's channel selector must be set to AUTO for this step. 4. Connect the receiver to a power source using the power adapter provided with your device. Connect the Relay G10 or G10S receiver's 1/4" Instrument Output into an amp or FX unit. Relay G10 Relay G10S Relay G10 Relay G10S 3 5. For use as a DI with bass and acoustic guitars, connect the Relay G10 or G10S receiver's XLR DI Out to a mixer or audio interface. 1. Insert the Relay G10TII transmitter into the INPUT jack (Spider V) or GUITAR IN jack (POD Go Wireless) and power your device on. VIEW ACTION PAGE PAGE WAH VOL EXP 1 EXP 2 W I R E L E S S C A D B MODE EDIT / EXIT TAP TUNER Relay G10 Relay G10S Using a Relay G10TII Transmitter with Relay-Ready Devices In addition to using a Line 6 wireless receiver, the Relay G10TII transmitter also works with a number of select Relay-Ready devices, such as select Line 6 Spider V amplifiers and the POD Go Wireless guitar processor (please also see https://line6. com/g10info/ for more info). The Relay-Ready device charges the G10TII transmitter, as well as scans the environment, and automatically selects the optimal wireless channel and frequency. 2. Once fully charged, insert the G10TII transmitter into your instrument. Please refer to your Spider V Pilot's Guide, POD Go Wireless Owner's Manual, or other Relay-Ready product's documentation for additional details. 4 Relay G10TII Transmitter Details 1 Sleep Mode - To extend battery life, sleep mode is activated after a period of 4 minutes where no audio input is detected. The transmitter wakes up automatically when the instrument is played. 3 2 1. Battery Status - This LED illuminates green when the transmitter is powered on and while more than 30 minutes of operating time remains. The LED flashes red when less than 30 minutes of operating time remainalso see "Important Information About the G10TII Transmitter" on page 6 for additional LED states. When the transmitter is plugged into the receiver for charging, a flashing red LED indicates less than 30 minutes of battery operation, a flashing green LED indicates more than 30 minutes of battery operation, and a steady green LED indicates a fully charged transmitter. 2. 1/4" Plug - Plugs into instrument. 3. Antenna - The calibrated internal antenna avoids damage or deformity in normal use. Avoid covering the antenna area with metallic fabrics or accessories, and avoid direct contact with parts of the performers body for best results. 5 Important Information About the G10TII Transmitter The recommended charging temperature range of the G10TII transmitter is specified as 50 F to 86 F (10 C to 30 C). The recommended operating temperature range of the G10TII transmitter is specified as 32 F to 122 F (0 C to 50 C). Line 6 recommends charging the G10TII transmitter at least every 6 months, based on best practices for lithium-ion batteries. LED State Condition G10TII Transmitter (docked in receiver)*

Red (slow flash) Green (slow flash) Green (solid) Dim Red/Pink, may turn off Red (three quick flashes) Orange (solid) Off Charging, less than 30 minutes battery time remaining Charging, more than 30 minutes battery time remaining Fully charged G10TII is not docked properlyTry un-docking and re-docking G10TII charging has stopped due to being outside the supported temperature rangeCharging will resume after 5 minutes at 50 F to 86 F (10 C to 30 C) Docked and connected to Mac or PC, firmware update in progress Receiver not powered (transmitter enters sleep mode after 4 minutes if receiver power is disconnected) 6 LED State Condition G10TII Transmitter (connected to instrument) Green (solid) Red (slow flash) Off Transmitting, more than 30 minutes battery time remaining Transmitting, less than 30 minutes battery time remaining Connected to an instrument but not enough remaining battery power to transmit or removed from instrument

* When the G10TII is docked in a receiver or Relay-Ready device, the G10TII LED initially indicates amber, red, or green, depending on its current battery state. This is followed by 4 flashes (red) as the device initializes. Once this completes, the G10TII LED proceeds to indicate its remaining battery time. All values stated for amount of battery time remaining are approximate, and the exact amount of battery time remaining when an LED state is indicated may vary slightly between charges. When the G10TII flashes red, it may have up to 60 minutes of battery time remaining. If the G10TII reaches a full charge (solid green) and remains docked, the G10TII LED may eventually flash green again. This is expected behavior as the G10TII may discharge slightly after reaching a full charge, and its LED may then flash green until it again reaches a full charge. If the lockout indication continues for over 10 minutes, please stop charging and try again in a cooler environment condition. When the G10TII has insufficient power to transmit, its LED may indicate a pattern of five quick red flashes when connected to an instrument and audio is detected. This is the expected behavior. 7 Relay G10 Receiver Details 1 3 2 4 5 1. Micro USB Use for primary DC (5VDC /1A) power and firmware updates. 2. Output A " unbalanced, full performance output intended to drive a guitar/bass amplifier, stomp box, or multi-effects input. 3. Output B XLR balanced, full performance output intended to connect to a mixing console, PA system, audio interface, or similar. 4. LED Halo Multicolor LED halo displays status for transmitter battery and radio. The halo illuminates white when receiving a good radio signal from a G10T or G10TII transmitter. The halo pulses red when the transmitter's battery is below 30 minutes of operating time. A white pulsing halo indicates that no signal is received from the transmitter.*

5. Transmitter Input Plug in the transmitter here for charging and channel selection.

*NOTE: Please also see "G10 Receiver Information" on page 9 for details regarding the system's LED states. 8 G10 Receiver Information LED State Condition G10 Receiver (G10T or G10TII transmitter docked) White (solid) White (flicker) Red (flash) Pink (pulse) Pink (solid) Off G10T or G10TII charging or fully charged System has auto-scanned and is changing its channel G10T or G10TII not docked properlyTry un-docking and re-docking Connected to Mac or PC, Line 6 Updater open Connected to Mac or PC, firmware update in progress No power to receiver G10 Receiver (G10T or G10TII transmitter un-docked) LED State Condition White (solid) Transmission received, more than 30 minutes of runtime Red (slow flash) Transmission received, less than 30 minutes of runtime White (pulse) White (flicker) Off Receiver on but no transmission received Transmission dropout (RF mute) No power to receiver 9 Relay G10S Receiver Details 3 2 1 5 4 7 6 7 1. Cable Tone - When an instrument is connected to a pedal or amp with a cable, the cable alters the sound, depending on the cable's length. Cable Tone adds a 10 feet or 30 feet cable emulation to the sound. 2. Micro USB - Use for firmware updates or optional power. 3. 9V DC Power - Use for primary DC (9VDC / 500mA) power. 4. Instrument Output - Connect to the input of a guitar pedal or amplifier. 5. XLR DI Output - Balanced XLR output for connection to a mixing desk, audio interface, powered speaker, or similar with DI level. 6. Channel Selector - With the G10T or G10TII transmitter docked in the receiver, set to AUTO for automatic channel selection. Or, with the transmitter docked in the receiver, set to a channel number to select a fixed channel. This is recommended when several wireless units are in use. 7. Antennas - Diversity antennas receive the RF signal from the transmitter. Please make sure that the antennas are not covered. 8. RF LEDs - 3 LEDs indicate the RF signal quality.*

9. Battery LEDs - 3 LEDs indicate the amount of battery life while the G10T or G10TII is docked or in use.*

*NOTE: Please see "G10S Receiver Information" on page 12 for details regarding the system's LED states. 10 8 9 11 10 10. Release Latch - Keeps the G10T or G10TII in a secure transport position. To remove the transmitter, push down on the latch while pulling the transmitter out. 11. G10T or G10TII Transmitter, Docked - With the G10T or G10TII transmitter docked, the battery is charged and the channel is set on the transmitter. 12. With the Channel Selector set to AUTO, the G10S receiver performs a scan and automatically sets the receiver and transmitter to the best available channel. To store and transport the Relay G10S system - Pull the G10T or G10TII transmitter out to the first click so that it is powered off and the battery cannot discharge. 11 G10S Receiver Information LED State Battery LEDs RF LEDs Battery LEDs Off RF LEDs On All LEDs Off G10S Receiver (G10T or G10TII transmitter docked) Condition Green (cycle 1-2-3) G10T or G10TII charging 3 Green LEDs (solid) G10T or G10TII fully charged 3 Red LEDs (solid) 2 Red LEDs (solid) 1 Red LED (solid) Battery LEDsOff RF LEDsRed (cycle 3-2-1) Battery LEDsOff RF LEDs3 Red LEDs (solid) More than 75% interference (not usable) 50% interference (usable, but only for short range) 25% interference (usable, also indicates G10S power on) G10T or G10TII not docked properlyTry un-docking and re-docking. Connected to Mac or PC, Line 6 Updater open No power to receiver 12 LED State Condition G10S Receiver (G10T or G10TII transmitter un-docked) 3 Green LEDs (solid) Transmission received, more than 4.5 hours of runtime 2 Green LEDs (solid) Transmission received, more than 3 hours of runtime Battery LEDs 1 Green LED (solid) Transmission received, more than 1.5 hours of runtime 1 Red LED (solid) Transmission received, more than 30 minutes of runtime 1 Red LED (flash) Transmission received, less than 30 minutes of runtime 3 Green LEDs (solid) Transmission received, good signal strength 2 Green LEDs (solid) Transmission received, average signal strength 1 Green LED (solid) Transmission received, poor signal strength RF LEDs 3 Red LEDs (solid) No transmission received, more than 75% interference (not usable) 2 Red LEDs (solid) No transmission received, 50% interference (usable, but only for short range) 1 Red LED (solid) Red (cycle 3-2-1) No transmission received, 25% interference (usable, also indicates G10S power on) G10S channel knob has been changed from its setting since G10T or G10TII was last docked All LEDs Off No power to receiver Serial No.: _____________________________

THIS PAGE FOR REFERNCE ONLY USE ARTWORK ON FOLLOWING PAGES SHOWNG AS PRINTED 4 UP: Score and fold at 159 mm IMPORTANT SAFETY INSTRUCTIONS SAFETY & COMPLIANCE MANUAL You should read these Important Safety Instructions. Keep these instructions in a safe place. Yamaha Guitar Group, Inc.:

26580 Agoura Road, Calabasas, CA 91302-1921 USA 2020 Yamaha Guitar Group, Inc. All rights reserved. Line 6 and the Line 6 logo are trademarks or registered trademarks of Yamaha Guitar Group, Inc. in the U.S. and/or other jurisdictions. MANUEL DE SCURIT ET DE CONFORMIT SICHERHEITS- UND KONFORMITTSHANDBUCH MANUAL DE SEGURIDAD Y CUMPLIMIENTO 40-00-0376 Rev M 2020 Yamaha Guitar Group, Inc. All rights reserved. 26580 Agoura Road Calabasas, CA 91302 USA voice (818) 575-3733 fax (818) 575-3601 Date:

Dec. 3, 2020 Line 6, Manual Safety & Compliance Standard Part #: 40-00-0376 Part Name/Number:

Prepared by:

Specifications / Notes:

Steve Fazio Use quality sheets. Use compliant ink only. Manual is 159mm x 83mm. Reference above shows example of 4 up layout , 2 pagers per side. REVISION M REVISIONS Jason Lynn 1/20/2016 First release for production. S.Fazio 4/10 /2017 S.Fazio 12/21/2017 Added new RFQ statement, all languages Added CAUTION statement for removing grille Added Energy label at end of Spanish manual Updated Japan segment. Jason Lynn 11/09/2016 Rewrite for entire Japan segment of manual. Updated portions of French and english to be verbatim. Jason Lynn 5/20/2016 Deleted content on page 6. Jason Lynn 9/19/2016 A B C D E F G H I J K L M Revised Eng and French - added new FCC rules pg 1.Revised Japan language New Japan version added to replace incorrect Japan version used in Rev H. No changes to other languages. Revised 3 bullet points in English and French - No changes to other languages. Added 3 bullet points end of last pg. for DC-3h power supply reqs., S.Fazio 03/24/2020 all languages. English + Big 5. Revised Eficiencia Energetica image from V to VI per requirement, S.Fazio 04/28/2020

(Spanish language only). Added new electircal, FCC warnings, all languages. Revised all legal, per Davd Kekst. New Japan version provided by YGG. only, added Compliance with harmonic currents statement. SFazio 12/3/2020 S.Fazio 12/21/2017 S.Fazio 07/29/2019 S.Fazio 8/30/2019 S.Fazio 11/07/2019 IMPORTANT SAFETY INSTRUCTIONSSAFETY & COMPLIANCE MANUALYou should read these Important Safety Instructions. Keep these instructions in a safe place.MANUEL DE SCURIT ET DE CONFORMIT SICHERHEITS- UND KONFORMITTSHANDBUCH MANUAL DE SEGURIDAD Y CUMPLIMIENTO 40-00-0376 Rev M 2020 Yamaha Guitar Group, Inc. All rights reserved. C AUT ION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of fire or electric shock, do not remove screws. No user-serviceable parts inside. Refer servicing to qualified service personnel. WARNING: To reduce the risk of fire or electric shock, do not expose the appliance to rain or moisture. WARNING: Changes or modifications not expressly approved in writing by Line 6 may void the users authority to operate this equipment. The lightning flash with arrowhead symbol within an equilateral triangle means electric shock hazard. It is intended to alert the user to the presence of uninsulated dangerous voltage within the product enclosure that may be of significant magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle means Warning/Caution! It is intended to alert the user of the presence of important operating and maintaining

(servicing) instructions in the literature accompanying the appliance. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003. RF Exposure Information This equipment complies with FCC/IC radiation exposure limits. The equipment should be installed and operated with a minimum separation distance of 15 mm between the equipment and a persons body. CAUTION: Changes or modifications to this device not expressly approved by Line 6 could void the users authority to operate the equipment under FCC rules. This apparatus does not exceed the Class A/Class B

(whichever is applicable) limits for radio noise emissions from digital apparatus, as set out in the radio interference regulations of the Canadian Department of Communications. Follow all instructions. Before using your product, carefully read the applicable items of these operating instructions and the safety suggestions. Read these instructions. Keep these instructions. Heed all warnings. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Minimum distance

(5 cm) around the apparatus for sufficient ventilation. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc. Install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. No naked flame sources, such as lighted candles, should be placed on the apparatus. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades, with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and at the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with the cart stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/

like. apparatus combination to avoid injury from tip-over. Unplug the apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as if the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. The use of apparatus is in tropical and/or moderate climates. TERMINALS marked with this symbol are HAZARDOUS LIVE and the external wiring connected to these TERMINALS requires installation by an INSTRUCTED PERSON or the use of ready-made leads or cords. WARNING: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. This apparatus shall be connected to a MAINS socket outlet with a protective earthing connection. WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. WARNING: Installed (battery pack/batteries) shall not be exposed to excessive heat, such as sunshine, fire, or the Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Where an all-pole mains switch is used as the disconnect device, the location on the apparatus and the function of the switch shall be described, and the switch shall remain readily operable. Even when the power switch is in standby status, electricity is still flowing to the apparatus at minimum level. When you are not using the apparatus for a long time, make sure you unplug the power cord from the wall AC outlet. CAUTION: To prevent electric shock hazard, do not connect to mains power supply while grille is removed. RF Exposure Statement: This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Line 6 Wireless Products operate between 2.400 2.484 GHz and operate at a transmit power of 10mW or less. A Declaration of Conformity can be found at:

https://line6.com/compliance/

For Products with Lithium Batteries, the Following Statements Apply:

CAUTION: Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type. Batteries shall not be exposed to excessive heat such as sunshine, fire, or the like. Disconnect power before fuse replacement. NOTE: For the DC-3h, the efficiency at 10% load is Replace only with certified/approved fuse of same type, size, and ratings as marked on product. 10% load is 72.96%

NOTE: For the Variax Battery Charger Kit, the efficiency at NOTE: For the DC-DL4, the efficiency at 10% load is 77.295%

72.96%

For Wireless Products, the Following Statements Apply:

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. WARNING: Changes or modifications not expressly approved in writing by Line 6 may void the users authority to operate this equipment. AT TE NT ION RISQUE DLECTROCUTIONNE PAS OUVRIR. AVERTISSEMENT: Pour rduire le risque dincendie ou dlectrocution, ne retirez aucune vis. Aucun lment interne nest rparable par lutilisateur. Pour toute rparation/entretien, consultez un technicien qualifi. ATTENTION: Protgez cet appareil de la pluie et de lhumidit afin dviter tout risque dincendie ou dlectrocution. AVERTISSEMENT: Toute modification non autorise expressment par crit par Line 6 peut annuler lhabilitation des utilisateurs manier ce matriel. Lclair flch dans un triangle quilatral indique un risque dlectrocution. Il avertit lutilisateur de la prsence de tension dangereuse non isole au sein du produit, susceptible de constituer un risque dlectrocution pour les personnes. Le point dexclamation dans un triangle quilatral signifie Prudence!. Il avertit lutilisateur de lexistence dinstructions importantes relatives au maniement et lentretien du dispositif dans la documentation qui laccompagne. Remarque: Cet appareil a fait lobjet de tests et a t dclar conforme aux normes des appareils numriques de classe B, conformment la partie 15 de la rglementation FCC. Ces limites sont conues pour offrir une protection raisonnable contre les interfrences nocives dans une installation rsidentielle. Ce matriel gnre, utilise et peut mettre de lnergie sous forme de frquences radio et, sil nest pas install et utilis conformment aux instructions, il peut gnrer des interfrences nocives pour les communications radio. Il est cependant impossible de garantir quil ny aura pas dinterfrences au sein dune installation particulire. Si ce matriel interfre avec la rception radio ou tlvisuelle, ce qui peut tre dtermin en mettant le matriel sous puis hors tension, lutilisateur est invit essayer de supprimer ces interfrences en prenant une ou plusieurs des mesures suivantes:

Rorientez ou dplacez lantenne de rception. Augmentez la distance sparant le matriel du rcepteur. Branchez le matriel une prise dpendant dun autre circuit que celui auquel le rcepteur est branch. Demandez de laide au revendeur ou un technicien radio/TV expriment. ATTENTION: Toute modification non autorise expressment par Line 6 peut annuler lhabilitation des utilisateurs manier ce matriel, conformment aux rgles FCC. Ce dispositif nexcde pas les limites de la classe A/classe B

(selon la classe applicable) concernant les interfrences radio mises par des dispositifs numriques, telles que dfinies dans la rglementation relative aux interfrences radio du Dpartement canadien de communications. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1. Lappareil ne doit pas produire de brouillage;

2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. Dclaration dexposition aux radiations Cet quipement est conforme aux limites dexposition FCC/

IC. Installez et oprez lappareil en veillant conserver une distance dau moins 15 mm entre lquipement et les personnes. Avant dutiliser votre produit, veuillez lire attentivement ce manuel et les conseils de scurit. Lisez ces instructions. Conservez ces instructions. Respectez toutes les mises en garde. Suivez toutes les instructions. Nutilisez pas le produit proximit deau. Nettoyez-le avec un chiffon sec uniquement. Distance minimale (5 centimtres) autour de lappareil pour une aration suffisante. Il convient que laration ne soit pas gne par lobstruction des ouvertures daration par des objets tels que journaux, nappes, rideaux, etc. Il convient de ne pas placer sur lappareil de sources de flammes nues, telles que des bougies allumes. Si lappareil est destin tre utilis sous un climat tempr et/ou tropical. Nobstruez pas les ouvertures daration. Installez le produit conformment aux consignes du fabricant. Ne linstallez pas proximit de sources de chaleur comme des radiateurs, des ouches dair chaud, des poles ou dautres appareils gnrateurs de chaleur

(amplificateurs compris). Ne supprimez pas la scurit offerte par la fiche polarise ou dote dune broche de terre. Une fiche polarise dispose de deux lames dont une plus large que lautre. Une fiche avec broche de terre dispose de trois broches dont une pour la terre. La lame plus large ou la troisime broche est conue pour votre scurit. Si la fiche fournie ne sadapte pas votre prise de courant, consultez un lectricien pour faire remplacer cette prise obsolte. Protgez le cordon dalimentation pour viter quil ne soit pitin ou abm notamment la hauteur des fiches, des rallonges et au point de connexion du produit. Utilisez exclusivement des fixations ou accessoires spcifis par le fabricant. Utilisez ce produit uniquement avec un chariot, stand, pied, support ou table du type spcifi par le constructeur ou livr avec le produit. Si vous utilisez un chariot, soyez prudent lors de son dplacement afin dviter que le produit ne bascule et ne blesse quelquun. Dbranchez le produit en cas dorage ou sil doit rester inutilis durant une priode assez longue. Pour tout dpannage ou entretien, veuillez consulter un service ou un technicien qualifi. Il est impratif de faire appel un technicien qualifi si lappareil a t endommag dune quelconque faon, notamment, si le cordon dalimentation ou la fiche est endommage, si du liquide sest renvers ou si des objets sont tombs dans lappareil, si lappareil a t expos la pluie ou lhumidit, sil ne fonctionne plus normalement ou sil est tomb. Les BORNES portant ce symbole prsentent un DANGER DLECTROCUTION. Toute connexion ces bornes ncessite lintervention dun TECHNICIEN ou lutilisation de cbles ou cordons fabriqus en usine. ATTENTION: Il y a risque dexplosion si une pile/batterie est mal remplace. Remplacez-la uniquement par une pile/batterie identique ou quivalente. Ce produit doit tre branch une prise secteur disposant dune connexion de scurit la terre. AVERTISSEMENT: Pour viter toute blessure, le produit doit tre convenablement fix au sol/mur, conformment aux instructions dinstallation. AVERTISSEMENT: La batterie ou les piles installes ne peuvent pas tre exposes une chaleur excessive

(soleil, feu etc.). Si la fiche secteur du produit ou dune rallonge sert le dbrancher du secteur, cette fiche secteur doit rester accessible tout instant. Quand un interrupteur sert dconnecter le produit du secteur, lemplacement et la fonction de cet interrupteur sont dcrits et linterrupteur doit rester accessible tout instant. Quand linterrupteur est en veille (standby), le produit reste aliment par un flux lectrique minime. Si vous navez pas lintention dutiliser le produit durant une priode prolonge, dbranchez le cordon dalimentation de la prise secteur. ATTENTION: Pour viter tout choc lectrique, ne branchez pas lappareil au secteur tant que la grille nest pas remonte. Dbranchez le cordon dalimentation avant de remplacer le fusible. Remplacez-le exclusivement par un fusible certifi/

autoris de type, taille et caractristiques identiques celles indiques sur le produit. Pour les produits sans fil, les points suivants sont dapplication:

CE DISPOSITIF EST CONFORME LA PARTIE 15 DE LA RGLEMENTATION FCC. Le fonctionnement de lappareil est soumis aux deux conditions suivantes: (1) lappareil ne peut pas causer dinterfrences nocives, et (2) lappareil doit accepter toute interfrence reue, mme des interfrences susceptibles dentraner un fonctionnement indsirable. AVERTISSEMENT: Toute modification non autorise expressment par crit par Line 6 peut annuler lhabilitation des utilisateurs manier ce matriel. Dclaration dexposition aux ondes radio: Cet metteur ne peut pas tre plac proximit ou utilis en mme temps quune autre antenne ou metteur. Les produits sans fil Line 6 fonctionnent sur une plage comprise entre 2,400 et 2,484GHz, une puissance de transmission de 10mW ou moins. La dclaration de conformit peut tre trouve sur:

www.line6.com/compliance. Pour les produits avec des piles au lithium, les points suivants sont dapplication:

ATTENTION: Il y a risque dexplosion si la pile est mal remplace. Remplacez-la uniquement par une pile identique ou quivalente. Les piles ne peuvent pas tre exposes une chaleur excessive (soleil, feu etc.). Remarque: Pour le DC-3h, lefficacit 10% de charge est Remarque: Pour le Variax Battery Charger Kit, lefficacit 10% de charge est 72,96%

Remarque: Pour le DC-DL4, lefficacit 10% de charge 77,295%

est 72,96%

VORS ICHT STROMSCHLAGGEFAHR! NICHT FFNEN. WARNUNG: Um Brand- und Stromschlaggefahr zu vermeiden, niemals die Schrauben entfernen. Das Produkt niemals selbst warten. berlassen Sie alle Wartungsarbeiten einem qualifi-

zierten Wartungstechniker. WARNUNG: Um Brand- und Stromschlaggefahr zu vermeiden, dieses Gert niemals Regen oder Feuchtigkeit aussetzen. WARNUNG: nderungen und Modifikationen, die von Line 6 nicht schriftlich genehmigt wurden, machen die Nutzungsbe-

fugnis fr dieses Gert hinfllig. Das Blitzsymbol mit einem Pfeilkopf in einem gleich-

schenkligen Dreieck weist auf Stromschlaggefahr hin. Es soll Anwender auf nicht isolierte gefhrliche Spannungen innerhalb des Produktgehuses aufmerksam machen, die so stark sein knnen, dass sie Stromschlge bei Menschen verur-

sachen knnen. Das Ausrufezeichen in einem gleichschenkligen Drei-

eck bedeutet Warnung/Vorsicht. Es soll Anwender auf wichtige Bedienungs- und Wartungshinweise in der dem Gert beiliegenden Dokumentation hinweisen. Anmerkung: Dieses Gert wurde getestet und erfllt die Gren-

zwerte eines Class B-Digitalgerts entsprechend Part 15 der FCC-Vorschriften. Diese Grenzwerte garantieren einen ausrei-

chenden Schutz vor schdlichen Interferenzen bei der Installa-

tion in einem Haus bzw. einer Wohnung. Dieses Gert erzeugt und verwendet Radiofrequenzenergie und kann diese auch abstrahlen und dadurch Funkverbindungen stren, wenn es nicht den Anweisungen entsprechend installiert und benutzt wird. Allerdings gibt es keine Garantie, dass bei bestimmten Installationen nicht trotzdem Interferenzen auftreten knnen. Wenn das Gert den Radio- oder Fernsehempfang strt, was man sehr leicht durch das Aus- und Einschalten berprfen kann, muss der Anwender diese Strungen auf eine der fol-

genden Arten beheben:

Durch die Aufstellung der Empfangsantenne an einem Vergrern Sie den Abstand zwischen dem Gert und ihrem anderen Ort. Empfnger. Schlieen Sie das Gert nicht an denselben Stromkreis an wie ihr Radio- oder Fernsehgert. Bitten Sie Ihren Fachhndler oder einen erfahrenen Radio-/

Fernsehtechniker um Hilfe. VORSICHT: Bei Modifikationen, die von der Line 6 nicht aus-

drcklich genehmigt werden, erlischt eventuell die Nutzungs-

erlaubnis der FCC. Dieses Gert erfllt die Grenzwerte der Klasse A/B (je nach-

dem, welche der beiden anwendbar ist) fr Funkstrungen durch digitale Gerte gem den Radio Interference Regula-

tions des kanadischen Ministeriums fr Kommunikation. Vor dem Einsatz dieses Produkts alle zutreffenden Punkte und Sicherheitshinweise durchlesen. Beachten Sie alle in dieser Anleitung erwhnten Warnungen. Verwenden Sie dieses Gert niemals in der Nhe von Wasser. Reinigen Sie das Produkt nur mit einem trockenen Tuch. Versperren Sie niemals die Lftungsschlitze. Stellen Sie das Gert immer den Anweisungen des Herstellers entspre-

chend auf. Stellen Sie das Produkt niemals in die Nhe einer Wrme-

quelle (Heizkrper, fen usw.) oder eines Gerts, das sehr hei wird (z.B. ein Verstrker). Versuchen Sie niemals, die Sicherheitsvorkehrung des pola-

risierten oder Erdungsstiftes zu umgehen. Ein polarisierter Stecker weist zwei Stifte mit unterschiedlicher Breite auf. Ein geerdeter Stecker enthlt zwei Stifte und eine Erdungs-

buchse. Der breitere Stift bzw. die Erdungsbuchse dient Ihrer Sicherheit. Wenn der beiliegende Stecker nicht in die Steckdose passt, mssen Sie einen Elektriker bitten, neue Steckdosen zu installieren. Verlegen Sie das Stromkabel so, dass man nicht darber stolpern kann. Das fhrt besonders in der Nhe der Buchse/

des Kabelaustritts am Gert zu Problemen. Verwenden Sie nur Halterungen/Zubehr, die/das vom Her-

steller ausdrcklich empfohlen wird/werden. Verwenden Sie nur Wagen, Stnder, Halterun-

gen und Unterlagen, die entweder vom Her-

steller empfohlen werden oder zum Lieferum-

fang gehren. Ein eventuell verwendeter Wagen darf beim Transport nicht umkippen, weil das zu schweren Verletzungen fhren kann. Lsen Sie im Falle eines Gewitters bzw. wenn Sie das Gert lngere Zeit nicht verwenden mchten, den Netzanschluss. berlassen Sie alle Wartungsarbeiten einer qualifizierten Kundendienststelle. Das Gert muss zur Wartung einge-

reicht werden, wenn es Schden aufweist, z.B. wenn das Netzkabel oder der Stecker beschdigt ist, wenn Wasser oder Fremdkrper in das Gerteinnere gelangt sind, wenn das Gert Feuchtigkeit oder Regen ausgesetzt war, wenn es sich nicht normal verhlt oder wenn seine Funktionstchtig-

keit merklich nachgelassen hat. Lsen Sie vor Austauschen der Sicherung die Netzver-

bindung. Fr Produkte mit Lithiumbatterien gelten folgende Erkl-

rungen:

VORSICHT: Bei einem falschen Austausch der Batterie besteht Explosionsgefahr. Ersetzen Sie sie durch ein Modell desselben oder eines gleichwertigen Typs. Batterien drfen nie extremer Hitze, z.B. einem Feuer oder direkter Sonneneinstrahlung, ausgesetzt werden. Hinweis: Die Effizienz des DC-3h bei 10% Last ist Hinweis: Die Effizienz des Variax Battery Charger Kit bei Hinweis: Die Effizienz des DC-DL4 bei 10% Last ist 77.295%

10% Last ist 72.96%

72.96%

Mit diesem Symbol gekennzeichnete ANSCHLSSE fhren eine GEFHRLICHE STROMSTRKE. Kabel, die man hier anschliet, mssen von einem FACHMANN isoliert werden bzw. ab Werk fr diese Verwendung geeignet sein. VORSICHT: Bei einem falschen Austausch der Batterie besteht Explosionsgefahr. Ersetzen Sie sie durch ein Modell desselben oder eines gleichwertigen Typs. Das Gert muss an einen geerdeten Stromkreis angeschlossen werden. WARNUNG: Um Verletzungen zu vermeiden, mssen Sie dieses Gert den Installationsanweisungen entsprechend am Fuboden/einer Wand befestigen. WARNUNG: Der Akku/die Batterien in diesem Gert darf/

drfen nie extremer Hitze, darunter Sonneneinstrahlung, Feuer usw., ausgesetzt werden. Wenn das Netzkabel bzw. der Koppler dieses Gerts zum Ausschalten verwendet wird, muss es/er allzeit gut erreich-

bar sein. Im Falle eines allpoligen Netzschalters mssen seine Plat-

zierung auf dem Gert sowie seine Funktion beschrieben werden. Der Schalter muss allzeit gut erreichbar sein. Selbst wenn sich der Netzschalter in der Bereitschaftsposi-

tion befindet, fliet noch ein wenig Strom durch das Gert. Wenn Sie das Gert lngere Zeit nicht verwenden mchten, sollten Sie die Verbindung mit der Netzsteckdose lsen. VORSICHT: Um Stromschlaggefahr zu vermeiden, darf das Gert niemals an eine Steckdose angeschlossen werden, nachdem der Grill entfernt wurde. Legen Sie ausschlielich eine zertifizierte/zugelassene Sicherung desselben Typs sowie derselben Gre und Spezifikation ein. Fr Funkgerte gelten folgende Erklrungen:

DIESES GERT ENTSPRICHT PART 15 DER FCC-VORSCHRIF-

TEN. Die Bedienung unterliegt folgenden beiden Bedingun-

gen: (1) Dieses Gert darf keine schdlichen Streinstreuun-

gen erzeugen, und (2) das Gert muss smtliche empfangenen Interferenzen akzeptieren, einschlielich jener, die einen uner-

wnschten Betrieb zur Folge haben knnten. WARNUNG: nderungen und Modifikationen, die von Line 6 nicht schriftlich genehmigt wurden, machen die Nutzungsbe-

fugnis fr dieses Gert hinfllig. Funkfrequenzerklrung: Dieser Sender darf niemals neben eine andere Antenne gestellt bzw. gemeinsam mit ihr oder einem anderen Sender betrieben werden. Line 6-Funkprodukte senden/empfangen auf dem Band zwi-

schen 2,400 und 2,484GHz mit einer Leistung von maximal 10mW. Die Konformittserklrung finden Sie unter:

www.line6.com/compliance. PR E CAU CI N RIESGO DE DESCARGA ELCTRICA, NO ABRIR. los tornillos. En el ATENCIN: Para reducir el riesgo de incendios o de des-

cargas elctricas, no retires inte-

rior no hay ningn componente reparable por el usuario. El mantenimiento debe realizarlo personal tcnico cualificado. ATENCIN: Para reducir el riesgo de incendio o de descar-

gas elctricas, no expongas el dispositivo a la lluvia ni a la humedad. ATENCIN: Los cambios o las modificaciones no aprobadas expresamente por escrito por Line 6 pueden anular la autoriza-

cin de los usuarios para utilizar este equipo. El smbolo de un relmpago con punta de flecha dentro de un tringulo equiltero significa peligro de des-

carga elctrica. Tiene la funcin de avisar al usuario de la pre-

sencia de tensin peligrosa no aislada dentro de la carcasa del producto, que puede tener la magnitud suficiente como para suponer un riesgo de descarga elctrica para las perso-

nas. El signo de exclamacin dentro de un tringulo significa Advertencia/Precaucin. Tiene la funcin de avisar al usuario de la presencia de instrucciones importantes de fun-

cionamiento y mantenimiento (servicio) en la documentacin que se adjunta con el producto. Nota: Este equipo ha sido probado y cumple con los lmites establecidos para los dispositivos digitales de Clase B, de acuerdo con la parte 15 de la normativa FCC. Estos lmites estn diseados para garantizar una proteccin razonable frente a interferencias perjudiciales en un entorno residen-

cial. Este equipo genera, utiliza y puede emitir energa de radio frecuencia, y si no se instala y se utiliza de acuerdo con las instrucciones, puede provocar interferencias perjudiciales para las comunicaciones de radio. No obstante, no puede garanti-

zarse que no se produzcan interferencias en alguna instala-

cin concreta. Si este equipo causa interferencias en la recep-

cin de radio o televisin, que pueden detectarse desactivando y activando el equipo, el usuario puede corregirlas realizando alguna de las siguientes acciones:

Reorientar o reubicar la antena receptora. Aumentar la separacin entre el equipo y el receptor. Conectar el equipo a una toma de corriente en un circuito diferente al que est conectado el receptor. Solicitar ayuda al distribuidor o a un tcnico de radio/TV experimentado. PRECAUCIN: Los cambios o modificaciones realizados en este dispositivo y no aprobados expresamente por Line 6 podran anular el derecho de uso del equipo por parte del usuario segn las normas de la FCC. Este equipo no supera los lmites de la Clase A/Clase B (segn corresponda) para las emisiones de ruido de radio provenien-

tes de equipos digitales, segn lo establecido en las normas sobre interferencias de radio del Departamento Canadiense de Comunicaciones. Antes de utilizar el producto, lee detenidamente las sec-

ciones correspondientes de estas instrucciones de funcio-

namiento, as como las recomendaciones de seguridad. Sigue todas las precauciones de este manual. No uses este equipo cerca del agua. No bloquees los orificios de ventilacin. Instlalo siguiendo Lmpialo nicamente con un pao seco. las instrucciones del fabricante. No lo instales cerca de fuentes de calor como radiadores, calefactores, estufas ni ningn otro tipo de aparato

(incluyendo amplificadores) que genere calor. Ten en cuenta los fines de seguridad del conector polarizado o con conexin a tierra. Un conector polarizado tiene dos contactos, uno de mayor tamao que el otro. Un conector con conexin a tierra tiene dos contactos, y el tercero es el de la toma de tierra. El contacto ancho o el tercer contacto se instalan con fines de seguridad. Si el conector del equipo no encaja en la toma de corriente disponible, debers acudir a un electricista para que sustituya la toma obsoleta. Procura evitar que el cable de alimentacin resulte pisado o quede atrapado, especialmente en la zona de los conectores y en el punto donde sale del equipo. Utiliza slo los complementos/accesorios especificados por el fabricante. Utiliza slo la mesilla con ruedas, el soporte, el trpode, la abrazadera o la mesa indicados por el fabricante o incluidos con el equipo. Si utilizas una mesilla con ruedas, ten cuidado al desplazar el conjunto de la mesilla y el equipo, ya que si se vuelca podra provocar lesiones. Desconecta el equipo de la toma de corriente en caso de tormentas elctricas, o si no vas a utilizarlo durante un periodo de tiempo prolongado. El mantenimiento debe realizarlo el personal tcnico cualificado. Es necesario reparar el equipo si ha sufrido algn tipo de dao, como por ejemplo daos en el cable de alimentacin, si se ha derramado algn lquido o se ha cado algn objeto en el interior del equipo, si ste ha estado expuesto a la lluvia o a la humedad, si no funciona con normalidad, o si se ha cado al suelo. Los terminales marcados con este smbolo indican CIRCUITOS BAJO TENSIN, y el cableado externo conectado a estos terminales debe instalarlo un TCNICO CUALIFICADO, o bien deben utilizarse cables o alambres prefabricados. PRECAUCIN: Si la batera se sustituye incorrectamente existe un riesgo de explosin. Sustityala nicamente por otra del mismo tipo o equivalente. Este dispositivo debera conectarse a una toma de corriente con conexin a tierra. ATENCIN: Para evitar lesiones, este equipo debe estar firmemente sujeto al suelo/la pared siguiendo las instrucciones de instalacin. ATENCIN: El grupo de bateras/las bateras instaladas no deben exponerse a un calor excesivo, como la luz directa del sol, el fuego o similares. Tanto si se utiliza el enchufe principal como un acoplador de equipo como dispositivo de desconexin, ste debe permanecer totalmente operativo. Si se utiliza un conmutador de alimentacin con todas las clavijas como dispositivo de desconexin, se indicarn la posicin en el aparato y la funcin del conmutador, y ste debe permanecer totalmente operativo. Aunque el conmutador de alimentacin se encuentre en estado de espera, el equipo sigue recibiendo un pequeo flujo de electricidad. Si no va a utilizar el equipo durante mucho tiempo, desconecte siempre el cable de alimentacin de la toma de pared. PRECAUCIN: Para evitar sufrir descargas elctricas, no lo conecte a la fuente de alimentacin si se ha retirado la rejilla. Desconecte la alimentacin antes de sustituir el fusible. Sustituya nicamente con fusibles certificados/aproba-

dos del mismo tipo, tamao y capacidad que los indica-

dos en el producto. Para los productos inalmbricos, se aplican las siguien-

tes declaraciones:

ESTE DISPOSITIVO CUMPLE CON LA PARTE 15 DE LA NORMA-

TIVA FCC. El funcionamiento est sujeto a las dos condiciones siguientes: (1) Este dispositivo no puede ocasionar interferen-

cias perjudiciales, y (2) este dispositivo debe aceptar cualquier interferencia recibida, incluyendo las que puedan causar un funcionamiento no deseado. ATENCIN: Los cambios o las modificaciones no aprobadas expresamente por escrito por Line 6 pueden anular la autoriza-

cin de los usuarios para utilizar este equipo. Declaracin de exposicin a radiofrecuencia: Este transmi-

sor no debe colocarse ni utilizarse junto a ninguna otra antena o transmisor. Los productos inalmbricos de Line 6 operan en una banda entre 2,400 y 2,484GHz, y con una potencia de transmisin mxima de 10mW. La Declaracin de Conformidad puede consultarse en:

www.line6.com/compliance. Para los productos que utilizan bateras de litio, se aplican las siguientes declaraciones:

PRECAUCIN: Si la batera se sustituye incorrectamente existe un riesgo de explosin. Sustityala nicamente por otra del mismo tipo o equivalente. Las bateras no deben exponerse a un calor excesivo, como la luz directa del sol, el fuego o similares. EFICIENCIA ENERGTICA Cumple con la NOM-029-ENER-2017 VI Nota: Para el DC-3h, la eficiencia con una carga de 10%

es 77.295%

Nota: Para el Variax Battery Charger Kit, la eficiencia con una carga de 10% es 72.96%

Nota: Para el DC-DL4, la eficiencia con una carga de 10%

es 72.96%

Yamaha Guitar Group, Inc.

100V 200V 30

DC-3h 10% 77.295%

Variax Battery Charger Kit 10% 72.96%

DC-DL4 10% 77.295%

JIS C 61000-3-2

JBRC http://www.jbrc.com

: Line 6

Line 6 FCC A/B

: FCC15B

FCC15

(1) , (2)

: Line 6

Line 6 2.400 2.484GHz 10mW https://line6.com/compliance/

10%DC-3h 77.295%

72.96%

10%Variax Battery Charger Kit 72.96%

10%DC-DL4 Yamaha Guitar Group, Inc.:

26580 Agoura Road, Calabasas, CA 91302-1921 USA 2020 Yamaha Guitar Group, Inc. All rights reserved. Line 6 and the Line 6 logo are trademarks or registered trademarks of Yamaha Guitar Group, Inc. in the U.S. and/or other jurisdictions.

Agent Authorization Calabasas, CA 91302 Company: Line 6 Digital Wireless Inc. Address: 26580 Agoura Rd Product Name: G10TII Model Number(s): G10TII Product Description: Wireless Transmitter To Whom it May Concern:

We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above-named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Date: November 2, 2020 Signature:

Name:

Michealle Coker Title:

Wireless Compliance & Project Manager Company: Line 6 Digital Wireless Inc.

November 2, 2020 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA RE: Confidentiality Request FCC ID: UOB-G10TII To Whom It May Concern:

Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematics Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Michealle Coker Wireless Compliance & Project Manager 26580 Agoura Rd. Calabasas, CA 91302 818-575-6000ph

November 2, 2020 Subject: Authorization Letter To Whom It May Concern, This letter is to authorize Michealle Coker to act on my behalf in all possible manners including the signing of all documents pertaining to the certification of below:

Product Description: Wireless Transmitter Model: G10TII FCC ID: U0B-G10TII IC: 6768A-G10TII Should you have any questions, please kindly contact me. Sincerely, Guy Coker Principal Wireless Product Developer gcoker@line6.com 26580 Agoura Rd. Calabasas, CA 91302 818-575-6000ph