FCC ID: Q87-WPC600NV11 Dual Band Wireless-N Notebook Adapter

USER GUIDE Dual Band Wireless-N Notebook Adapter Model No: WPC600N About This Guide About This Guide Icon Descriptions While reading through the User Guide you may see various icons that call attention to specific items. Below is a description of these icons:

NOTE: This check mark indicates that there is a note of interest and is something that you should pay special attention to while using the product. WARNING: This exclamation point indicates that there is a caution or warning and it is something that could damage your property or product. WEB: This globe icon indicates a noteworthy website address or e-mail address. Online Resources Most web browsers allow you to enter the web address without adding the http:// in front of the address. This User Guide will refer to websites without including http://

in front of the address. Some older web browsers may require you to add it. Resource Linksys Website www.linksys.com Linksys International www.linksys.com/international Glossary www.linksys.com/glossary Network Security www.linksys.com/security Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright 2007 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders. Dual Band Wireless-N Notebook Adapter i Table of Contents

. LEDs . Chapter 3: Advanced Configuration Chapter 1: Product Overview

. 1

. 1

. 2 Chapter 2: Wireless Security Checklist

. 2

. General Network Security Guidelines . Additional Security Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3

. 3 Accessing the Wireless Network Monitor. Using the Wireless Network Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Link Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 13 Appendix A: Troubleshooting

. Appendix B: Specifications 14

. Appendix C: Windows XP Wireless Zero Configuration Appendix D: Warranty and Regulatory Information

. 15 Windows XP Wireless Zero Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 17 Limited Warranty. 17 FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 FCC Radiation Exposure Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Industry Canada Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

. Declaration dIndustrie Canada. 18

.18 Industry Canada Radiation Exposure Statement:. Safety Notices. 18 Wireless Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Avis de non-responsabilit concernant les appareils sans fil . . . . . . . . . . . . . . . . . .18 User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) . 19

. Dual Band Wireless-N Notebook Adapter ii Chapter 1 Product Overview Chapter 1:

Product Overview Thank you for choosing the Dual-Band Wireless-N Notebook Adapter. Setting up your network and your Dual Band Wireless-N Notebook Adapter is easier than ever. How does the Adapter do this? Like all wireless products, the Adapter allows for greater range and mobility within your wireless network, whether its using the Wireless-A

(802.11a), Wireless-G (802.11g) or Wireless-B (802.11b) standard. But with Wireless-N, it has even better range and speed. LEDs Power Power (Green) The Power LED lights up when the Adapter is powered on. Link/Act Link/Act (Green) The Link/Act LED lights up when the Adapter has an active connection. Dual Band Wireless-N Notebook Adapter 1 Chapter 2 Wireless Security Checklist Chapter 2:

Wireless Security Checklist Wireless networks are convenient and easy to install, so homes with high-speed Internet access are adopting them at a rapid pace. Because wireless networking operates by sending information over radio waves, it can be more vulnerable to intruders than a traditional wired network. Like signals from your cellular or cordless phones, signals from your wireless network can also be intercepted. Since you cannot physically prevent someone from connecting to your wireless network, you need to take some additional steps to keep your network secure. 1. Change the default wireless network name or SSID Wireless devices have a default wireless network name or Service Set Identifier (SSID) set by the factory. This is the name of your wireless network, and can be up to 32 characters in length. Linksys wireless products use linksys as the default wireless network name. You should change the wireless network name to something unique to distinguish your wireless network from other wireless networks that may exist around you, but do not use personal information (such as your Social Security number) because this information may be available for anyone to see when browsing for wireless networks. 2. Change the default password For wireless products such as access points and routers, you will be asked for a password when you want to change their settings. These devices have a default password set by the factory. The Linksys default password is admin. Hackers know these defaults and may try to use them to access your wireless device and change your network settings. To thwart any unauthorized changes, customize the devices password so it will be hard to guess. 3. Enable MAC address filtering Linksys routers give you the ability to enable Media Access Control (MAC) address filtering. The MAC address is a unique series of numbers and letters assigned to every networking device. With MAC address filtering enabled, wireless network access is provided solely for wireless devices with specific MAC addresses. For example, you can specify the MAC address of each computer in your home so that only those computers can access your wireless network. 4. Enable encryption Encryption protects data transmitted over a wireless network. Wi-Fi Protected Access (WPA/WPA2) and Wired Equivalency Privacy (WEP) offer different levels of security for wireless communication. A network encrypted with WPA/WPA2 is more secure than a network encrypted with WEP, because WPA/WPA2 uses dynamic key encryption. To protect the information as it passes over the airwaves, you should enable the highest level of encryption supported by your network equipment. WEP is an older encryption standard and may be the only option available on some older devices that do not support WPA. General Network Security Guidelines Wireless network security is useless if the underlying network is not secure. Password protect all computers on the network and individually password protect sensitive files. Change passwords on a regular basis. Install anti-virus software and personal software. Disable file sharing (peer-to-peer). Some applications may open file sharing without your consent and/or knowledge. firewall Additional Security Tips Keep wireless routers, access points, or gateways away from exterior walls and windows. Turn wireless routers, access points, or gateways off when they are not being used (at night, during vacations). Use strong passphrases that are at least eight characters in length. Combine letters and numbers to avoid using standard words that can be found in the dictionary. WEB: For more security, visit www.linksys.com/security information on wireless Dual Band Wireless-N Notebook Adapter 2 Chapter 3 Configuration Chapter 3:

Advanced Configuration link Advanced configuration is done through the Wireless Network Monitor (the Monitor). You can use the Monitor to check the information, search for available wireless networks, or create profiles that hold different configuration settings. Accessing the Wireless Network Monitor After installing the Adapter, the Wireless Network Monitor icon appears in the system tray of your computer. If the Wireless Network Monitor is enabled, the icon is green. If the Wireless Network Monitor is disabled or the Adapter is not connected, the icon is gray. Using the Wireless Network Monitor The opening screen of the Wireless Network Monitor is the Link Information screen. From this screen, you can find out how strong the current wireless signal is and how good the connections quality is. You can also click More Information to view additional status information about the current wireless connection. To search for available wireless networks, click the Connect tab. To perform configuration changes or create connection profiles, click the Profiles tab. Link Information The Link Information screen displays network mode, signal strength, and link quality information about the current connection. It also provides a More Information button to click for additional status information. Link Information Ad-Hoc Mode or Infrastructure Mode The screen indicates whether the Adapter is currently working in ad-

hoc or infrastructure mode. Signal Strength The Signal Strength bar indicates signal strength. Link Quality The Link Quality bar indicates the quality of the wireless network connection. Click More Information to view additional information about the wireless network connection on the Wireless Network Status screen. Wireless Network Status The Wireless Network Status screen provides information on your current network settings. Wireless Network Status Radio Band This is the radio band used on the network. Wireless Network Name This is the unique name (SSID) of the wireless network. Wireless Mode This is the mode of the wireless network currently in use. Wide Channel This is the Wireless-N primary channel used with a 40 MHz radio band network. Standard Channel This is the channel used by your wireless network. Security This is the status of the wireless security feature. Authentication This authentication method. Network Type This is the wireless network type. IP Address This is the IP Address of the Adapter. Subnet Mask This is the Adapters Subnet Mask. Default Gateway This is the Default Gateway address. DNS1 This is the DNS address of the Adapter. your wireless networks is Dual Band Wireless-N Notebook Adapter 3 Chapter 3 Configuration MAC Address This is the MAC address of the wireless networks access point or wireless router. Signal Strength The Signal Strength bar indicates the signal strength. Link Quality The Link Quality bar indicates the quality of the wireless network connection. Click Statistics to go to the Wireless Network Statistics screen. Click Back to return to the initial Link Information screen. Click Save to Profile to save the currently active connection settings to a profile. Wireless Network Statistics The Wireless Networks Statistics screen provides statistics on your current network settings. Wireless Network Statistics Transmit Rate This is the data transfer rate of the current connection. (In Auto mode, the Adapter dynamically shifts to the fastest data transfer rate at any given time.) Receive Rate This is the rate that the Adapter receives data. Packets Received This shows the packets that the Adapter receives, in real time, after connecting to the wireless network or after clicking Refresh Statistics. Packets Transmitted This shows the packets that the Adapter transmits, in real time, after connecting to the wireless network or after clicking Refresh Statistics. Bytes Received This shows the bytes that the Adapter receives, in real time, after connecting to the wireless network or after clicking Refresh Statistics. Bytes Transmitted This shows the bytes that the Adapter transmits, in real time, after connecting to the wireless network or after clicking Refresh Statistics. Driver Version This shows the Adapters driver version. Noise Level This shows the level of background noise that affects the wireless signal. A lower reading translates into a higher quality signal. Signal Strength This is the intensity of the wireless signal that the Adapter receives. Transmit Power This is the power output at which the Adapter transmits. Up Time This indicates the length of the most recent connection to a wireless network. Total Up Time This indicates the cumulative total of the Adapters connection time. Signal Strength The Signal Strength bar indicates the signal strength. Link Quality The Link Quality bar indicates the quality of the wireless network connection. Click Back to return to the initial Link Information screen. Click Status to go to the Wireless Network Status screen. Click Save to Profile to save the currently active connection settings to a profile. Click Refresh to reset the statistics. Connect The Connect screen displays a list of available networks in the table on the left. The table shows each networks wireless network name, channel, and the quality of the wireless signal the Adapter receives. You may click Wireless Network Name, CH (Channel), or Signal, to sort by that field. Connect Wireless Network Name This is the SSID or unique name of the wireless network. CH This is the channel that the network uses. Signal This is the percentage of signal strength, from 0 to 100%. Dual Band Wireless-N Notebook Adapter 4 Chapter 3 Configuration Site Information For each network selected, the following settings are listed:

Wireless Mode This is the mode of the wireless network currently in use. Network Type This is the network type used by your wireless network. Radio Band This is the radio band used by your wireless network. Security This is the status of the wireless security feature. MAC Address This is the MAC address of the wireless networks access point. Refresh Click Refresh to perform a new search for wireless devices. Connect To connect to one of the networks on the list, select the wireless network, and click Connect. If the networks wireless security is enabled, then one of these wireless security screen appears:

WEP If the network has the wireless security WEP encryption enabled, then you see the WEP Key Needed for Connection screen. Select the appropriate level of WEP encryption, 64-bit or 128-bit. Then enter the networks Passphrase or WEP Key. Click Connect. To cancel the connection, click Cancel. WPA-Personal Security WPA2 If the network has WPA2 Personal wireless security enabled, then you will see the WPA2 Personal Needed for Connection screen. Enter the networks Pre-shared Key in the Pre-shared Key field. To connect to the network, click Connect. To cancel the connection, click Cancel. WPA2-Personal Security Profiles The Profiles screen lets you save different configuration profiles for different network setups. The table on the left displays a list of available profiles with their profile names and wireless network names. WEP Security WPA If the network has the wireless security WPA Personal security enabled, then you see the WPA Personal Needed for Connection screen. Select the appropriate encryption type, TKIP or AES. Enter the networks Pre-shared Key in the Pre-shared Key field. Then click Connect. To cancel the connection, click Cancel. Dual Band Wireless-N Notebook Adapter Profiles 5 Chapter 3 Configuration Profile This is the name of the profile. Wireless Network Name This is the SSID or unique name of the wireless network. Profile Information For each profile selected, the following are listed:

Wireless Network This is the type of wireless network currently in use. Wireless Mode This is the mode of the wireless network currently in use. Standard Channel This displays the channel used by your wireless network. Security This is the status of the wireless security. Authentication This is the authentication setting for the network. Connect To connect to a wireless network using a specific profile, select the profile, and click Connect. New Click New to create a new profile. See the next section, Creating a New Profile, for instructions. Edit Select the profile you want to change and click Edit. Import Click Import to import a profile that is saved in another location. Select the appropriate file, and click Open. Export Select the profile you want to save in a different location, and click Export. Direct Windows to the appropriate folder, and click Save. Delete Select the profile you want to delete and click Delete. NOTE: If you want to export more than one profile, you must export them one at a time. Create a New Profile The next screen is the Available Wireless Networks screen. This screen provides two options for setting up the Adapter. Available Wireless Networks. (For most users.) Use this option if you already have a network set up. The networks available to this Adapter are listed on this screen. You can choose one of these networks and click Connect to connect to it. Click Refresh to update the Available Wireless Networks list. Advanced Setup. If your network is not listed on this screen, select Advanced Setup to set up the adapter manually. This method of setting up the Adapter is intended for Advanced Users only. The setup for each option is described, step by step, under the appropriate heading on the following pages. Click Exit to close the Setup Wizard and set up the Adapter later. Available Wireless Networks The available networks are listed in the table on the center of the screen by Wireless Network Name. Select the wireless network you wish to connect to and click Connect. (If you do not see your network listed, you can click Refresh to bring the list up again.) If the network utilizes wireless security, you will need to configure security on the Adapter. If not, you will be taken directly to the Congratulations screen. 1. If you have wireless security enabled on your network, continue to step 2. If you dont have wireless security enabled, continue to step 3. If your network has WEP, WPA Personal, or WPA2 Personal wireless security enabled, then that security screen appears. Continue to the screen for your wireless security. 2. WEP (Wired Equivalent Privacy) If you have WEP enabled, this screen appears. Select 64-bit or 128-bit. Then enter a passphrase or WEP key. Available Wireless Networks Dual Band Wireless-N Notebook Adapter WEP Security 6 Chapter 3 Configuration Passphrase Enter a passphrase in the Passphrase field, so a WEP key is automatically generated. The passphrase is case-sensitive and must be 16 or fewer alphanumeric characters. It must match the passphrase of your other wireless network devices and is compatible with Linksys wireless products only. (For non-Linksys wireless products, enter the WEP key manually.) WEP Key The WEP key must match the WEP key of your wireless network. For 64-bit encryption, enter exactly 10 hexadecimal characters (0 to 9 and A to F.) For 128-

bit encryption, enter exactly 26 hexadecimal characters. Click Connect and proceed to Step 3. WPA Personal (Wi-Fi Protected Access) If your network has the wireless security WPA Personal enabled, this screen appears. Pre-shared Key - Enter a Pre-shared Key of 8-63 characters in the Pre-shared Key field. Click Connect and proceed to Step 3. 3. After the profile installs, the Congratulations screen appears. Click Connect to Network to implement the new settings immediately and return to the Link Information screen. Click Return to Profiles screen to keep the current settings active and return to the Profiles screen. Congratulations Congratulations! The profile is successfully configured. Advanced Setup If your network is not listed with the available networks, you can use Advanced Setup. WPA Personal Security Encryption Select the type of algorithm you want to use, TKIP or AES, from the Encryption drop-down menu. Pre-shared Key Enter a Pre-shared Key of 8-63 characters in the Pre-shared Key field. Click Connect and proceed to Step 3. WPA2 Personal (Wi-Fi Protected Access 2) If your network has the wireless security WPA2 Personal enabled, this screen appears. Available Wireless Networks 1. 2. Click Advanced Setup on the Available Wireless Networks screen to set up the adapter manually. The Wireless Network Monitors Wireless Network screen appears. Choose a network mode. Select 5GHz

+ 2.4GHz to connect to both 802.11a and 802.11n networks. Select 5GHz to connect only to 802.11a networks. Select 2.4GHz to connect only to 802.11n or 802.11g networks. 7 WPA2 Security Dual Band Wireless-N Notebook Adapter Chapter 3 Configuration Select Ad-Hoc Mode if you want to connect to another wireless device directly without using a wireless router or access point. Enter the Wireless Network Name for your network. Wireless Mode Infrastructure Mode Use this mode if you want to connect to a wireless router or access point. Ad-Hoc Mode Use this mode if you want to connect to another wireless device directly without using a wireless router or access point. Wireless Network Name This is the wireless network name (SSID) that must be used for all the devices in your wireless network. It is case-

sensitive and should be a unique name to help prevent others from entering your network. Click Next to continue, or click Back to return to the previous screen. Wireless Network 3. The Network Settings screen appears. If your network has a router or other DHCP server, select Obtain network settings automatically (DHCP). If your network does not have a DHCP server or router, select Specify network settings. Enter an IP Address, Subnet Mask, Default Gateway, and DNS addresses appropriate for your network. You must specify the IP Address and Subnet Mask on this screen. If you are unsure about the Default Gateway and DNS addresses, leave these fields empty. IP Address This IP Address must be unique to your network. Subnet Mask The Adapters Subnet Mask must be the same as your wired networks Subnet Mask. Default Gateway Enter the IP address of your networks Gateway here. DNS 1 and DNS 2 Enter the DNS address of your wired Ethernet network here. Click Next to continue, or click the Back button to return to the previous screen. The Wireless Mode screen shows a choice of two wireless modes. Select Infrastructure Mode if you want to connect to a wireless router or access point. 4. Dual Band Wireless-N Notebook Adapter 8 Chapter 3 Configuration 6. If your wireless network has wireless security, select the method of security used: WEP, WPA Personal, WPA2 Personal, WPA Enterprise, WPA2 Enterprise, or RADIUS. WEP stands for Wired Equivalent Privacy, and WPA stands for Wi-Fi Protected Access. WPA2 stands for Wi-Fi Protected Access 2. WPA is a stronger security method than WEP. WPA2 is a stronger security method than WPA. RADIUS stands for Remote Authentication Dial-In User Service. Click Next to continue or the Back button to return to the previous screen. Proceed to the section for your security method. WEP Advanced Users TX Key The default transmit key number is 1. If your networks access point or wireless router uses transmit key number 2, 3, or 4, select the appropriate number from the TX Key drop-down box. Authentication The default is set to Auto, so it will auto-

detect for Shared Key or Open System authentication. For Shared Key authentication, both the sender and the recipient share a WEP key for authentication. For Open System authentication, the sender and the recipient do not share a WEP key for authentication. If you are not sure which authentication method to select, keep the default, Auto. Click Next to continue, or click Back to return to the previous screen. WPA Personal WPA Personal offers two encryption methods, TKIP and AES, with dynamic encryption keys. Select TKIP or AES for encryption. Then enter a Pre-shared Key that is 8-63 characters in length. WEP WPA Personal WEP Select 64-bit or 128-bit encryption. Passphrase Enter a passphrase in the Passphrase field, so a WEP key is automatically generated. It is case-

sensitive and should not be longer than 16 alphanumeric characters. This passphrase must match the passphrase of your other wireless network devices and is compatible with Linksys wireless products only. (If you have any non-

Linksys wireless products, enter the WEP key manually on those products.) WEP Key The WEP key you enter must match the WEP key of your wireless network. For 64-bit encryption, enter exactly 10 hexadecimal characters. For 128-bit encryption, enter exactly 26 hexadecimal characters. Valid hexadecimal characters are 0 to 9 and A to F. Encryption Select the type of algorithm you want to use, TKIP or AES, from the Encryption drop-down menu. Pre-shared Key Enter a Pre-shared Key of 8-63 characters in the Pre-shared Key field. Click Next to continue or Back to return to the previous screen. Dual Band Wireless-N Notebook Adapter 9 Chapter 3 WPA2 Personal Enter a Pre-shared Key that is 8-63 characters. Configuration the certificate you installed to authenticate you on your wireless network. Select the type of encryption, TKIP or AES, from the Encryption drop-down menu. Click Next to continue or Back to return to the previous screen. PEAP WPA2 Personal Pre-shared Key Enter a Pre-shared Key of 8-63 characters in the Pre-shared Key field. Click Next to continue or Back to return to the previous screen. WPA Enterprise WPA Enterprise features WPA security used in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to the Router.) WPA Enterprise offers two authentication methods, EAP-TLS and PEAP, as well as two encryption methods, TKIP and AES, with dynamic encryption keys. Authentication Select the authentication method your network is using, EAP-TLS or PEAP. EAP-TLS L WPA Enterprise - EAP-TLS If you selected EAP-TLS, enter the login name of your wireless network in the Login Name field. Enter the name of the authentication server in the Server Name field (this is optional). From the Certificate drop-down menu, select Dual Band Wireless-N Notebook Adapter WPA Enterprise - PEAP If you selected PEAP, enter the login name of your wireless network in the Login Name field. Enter the password of your wireless network in the Password field. Enter the name of the authentication server in the Server Name field

(this is optional). From the Certificate drop-down menu, select the certificate you have installed to authenticate you on your wireless network; if you want to use any certificate, keep the default setting, Trust Any. Then select the authentication method used inside the PEAP tunnel. Select the type of encryption, TKIP or AES, from the Encryption drop-down menu. Click Next to continue or Back to return to the previous screen. WPA2 Enterprise features WPA2 security used WPA2 Enterprise in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to the Router.) WPA2 Enterprise offers two authentication methods, EAP-

TLS and PEAP. Authentication Select the authentication method your network is using, EAP-TLS or EAP-TLS If you selected EAP-TLS, enter the login name of your wireless network in the Login Name field. Enter the name of the authentication server in the Server Name field (this is optional). From the Certificate drop-down menu, select the certificate you have installed to authenticate you on your wireless network. 10 Chapter 3 Configuration EAP-TLS WPA Enterprise - EAP-TLS Click Next to continue or Back to return to the previous screen. PEAP RADIUS - EAP-TLS If you selected EAP-TLS, enter the login name of your wireless network in the Login Name field. Enter the name of the authentication server in the Server Name field (this is optional). From the Certificate drop-down menu, select the certificate you have installed to authenticate you on your wireless network. Click Next to continue or Back to return to the previous screen. PEAP WPA2 Enterprise - PEAP If you selected PEAP, enter the login name of your wireless network in the Login Name field. Enter the password of your wireless network in the Password field. Enter the name of the authentication server in the Server Name field

(this is optional). From the Certificate drop-down menu, select the certificate you have installed to authenticate you on your wireless network; if you want to use any certificate, keep the default setting, Trust Any. Then select the authentication method used inside the PEAP tunnel. Click Next to continue or Back to return to the previous screen. RADIUS RADIUS features use of a RADIUS server. (This should only be used when a RADIUS server is connected to the Router.) RADIUS offers two authentication types: EAP-TLS and PEAP. Authentication - Select the authentication method your network is using, EAP-TLS or PEAP. RADIUS - PEAP If you selected PEAP, enter the login name of your wireless network in the Login Name field. Enter the password of your wireless network in the Password field. Enter the name of the authentication server in the Server Name field

(this is optional). From the Certificate drop-down menu, select the certificate you have installed to authenticate you on your wireless network; if you want to use any certificate, keep the default setting, Trust Any. Then select the authentication method used inside the PEAP tunnel. Click Next to continue or Back to return to the previous screen. Dual Band Wireless-N Notebook Adapter 11 Chapter 3 Configuration 7. The Confirm New Settings screen appears next and shows the new settings. Confirm New Settings To save the new settings, click Save. To edit the new settings, click Back. To exit the Advanced Setup through the Wireless Network Monitor, click Exit. The Congratulations screen appears next. Click Finish. 8. Congratulations!

Congratulations! The profile is successfully configured. Dual Band Wireless-N Notebook Adapter 12 Troubleshooting Appendix A Appendix A:

Troubleshooting My computer does not recognize the Dual Band Wireless-

N Notebook Adapter. Make sure that the Dual Band Wireless-N Notebook Adapter is properly inserted into the PC Card slot. The Dual Band Wireless-N Notebook Adapter does not work properly. Reinsert the Dual Band Wireless-N Notebook Adapter into the notebooks PC Card slot. I cannot communicate with the other computers linked via Ethernet in the Infrastructure configuration. 1. 2. Make sure that the notebook or desktop is powered on. Make sure that the Dual Band Wireless-N Notebook Adapter is configured with the same Wireless Network Name (SSID) and WEP settings as the other computers in the Infrastructure configuration. WEB: If your questions are not addressed here, refer to the Linksys website, www.linksys.com Dual Band Wireless-N Notebook Adapter 13 Appendix B Appendix B:

Specifications Specifications Standards LEDs

# of Antennas Detachable (y/n) Modulations RF Pwr in dBm Receive Sensitivity in dBm IEEE 802.11b, IEEE 802.11g, IEEE 802.11a, Draft IEEE 802.11n Power, Link/Act 3 Antennas No 802.11a: OFDM 802.11b: CCK, QPSK, BPSK 802.11g: OFDM Wireless-N: BPSK, QPSK, 16-QAM, 64-QAM 802.11b: 18.07dBm 802.11g: 21.52dBm 802.11a: 18.06dBm 802.11n: 19.12dBm @ 5GHz 802.11n: 22.10dBm @ 2.4GHz 802.11b: -76dBm@10% (Typical) 802.11g: -65dBm@10% (Typical) 802.11a: -65dBm@10% (Typical) 802.11n: -50dBm@10% for 5GHz

(Typical) 802.11n: -50dBm@10% for 2.4GHz (Typical) 2.7dBi@2.4GHz, 1.2dBi@5.0GHz 620+-10mA 890+-10mA Antenna Gain in dBi Power Consumption TX:

RX:

Standby:

WEP, WPA Personal, WPA2 Personal, WPA & WPA2 Enterprise Up to 128-bit encryption Security features 580+-10mA Security key bits Environmental Dimensions Certification Unit Weight Operating Temp. Storage Temp. Operating Humidity Storage Humidity 2.24 x 0.39 x 3.98 (57mm x 10mm x 101mm) FCC 1.02 oz (0.029 kg) 0C to 50C (32F to 122F)

-20C to 70C (-4F to 158F) 10% to 85% Non-Condensing 5% to 90% Non-Condensing Dual Band Wireless-N Notebook Adapter 14 Appendix C Windows XP Wireless Zero Configuration Appendix C: Windows XP Wireless Zero Configuration Windows XP Wireless Zero Configuration If your computer is running Windows XP, then this choice will be available. If you want to use Windows XP Wireless Zero Configuration to control the Adapter, instead of using the Wireless Network Monitor, then right-click on the Wireless Network Monitor and select . NOTE: If you have WPA2 Wireless Security, refer to Update for Windows XP (KB893357) on the microsoft.com website to be able to connect correctly. Wireless Network Monitor Use Windows XP Configuration If you want to switch back to the Wireless Network Monitor, right-click the Wireless Network Monitor icon, and select Use Linksys Wireless Network Monitor. Windows XP Wireless Zero Configuration Icon 2. The screen that appears will show any available wireless network. Select the network you want. Click Connect. If your network does not have wireless security enabled, go to step 3. If your network does have wireless security enabled, go to step 4. NOTE: Steps 2 and 3 are for Windows XP with Service Pack 2 installed. Available Wireless Network 3. If your network does not have wireless security enabled, click Connect Anyway to connect the Adapter to your network. Use Linksys Wireless Network Monitor NOTE: For more information on Windows XP Wireless Zero Configuration, refer to Windows Help. 1. After installing the Adapter, the Windows XP Wireless Zero Configuration icon appears in your computers system tray. Double-click the icon. No Wireless Security 4. If your network uses wireless security WEP, enter the WEP Key used into the Network Key and Confirm network key fields. If your network uses wireless security WPA Personal, enter the Passphrase used into the Network Key and Confirm network key fields. Click Connect. Dual Band Wireless-N Notebook Adapter 15 Appendix C Windows XP Wireless Zero Configuration Wireless Security NOTE: Windows XP Wireless Zero Configuration does not support the use of a passprase. Enter the exact WEP key used by your access point. 5. Your wireless network will appear as Connected when your connection is active. Wireless Network Connection For more information about wireless networking on a Windows XP computer, click Start>Help>Support. Enter the keyword wireless in the field provided, and press the Enter key. The installation of the Windows XP Wireless Configuration is complete. Dual Band Wireless-N Notebook Adapter 16 Appendix D Warranty and Regulatory Information Appendix D:

Warranty and Regulatory Information Limited Warranty Linksys warrants to You that, for a period of one year

(the "Warranty Period"), your Linksys Product will be substantially free of defects in materials and workmanship under normal use. Your exclusive remedy and Linksys entire liability under this warranty will be for Linksys at its option to repair or replace the Product or refund Your purchase price less any rebates. This limited warranty extends only to the original purchaser. If the Product proves defective during the Warranty Period call Linksys Technical Support in order to obtain a Return Authorization Number, if applicable. BE SURE TO HAVE YOUR PROOF OF PURCHASE ON HAND WHEN CALLING. If You are requested to return the Product, mark the Return Authorization Number clearly on the outside of the package and include a copy of your original proof of purchase. RETURN REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF PURCHASE. You are responsible for shipping defective Products to Linksys. Linksys pays for UPS Ground shipping from Linksys back to You only. Customers located outside of the United States of America and Canada are responsible for all shipping and handling charges. ALL IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THE WARRANTY PERIOD. ALL OTHER EXPRESS OR IMPLIED AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF NON-INFRINGEMENT, ARE DISCLAIMED. Some jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to You. This warranty gives You specific legal rights, and You may also have other rights which vary by jurisdiction. This warranty does not apply if the Product (a) has been altered, except by Linksys, (b) has not been installed, operated, repaired, or maintained in accordance with instructions supplied by Linksys, or (c) has been subjected to abnormal physical or electrical stress, misuse, negligence, or accident. In addition, due to the continual development of new techniques for intruding upon and attacking networks, Linksys does not warrant that the Product will be free of vulnerability to intrusion or attack. REPRESENTATIONS CONDITIONS, Dual Band Wireless-N Notebook Adapter TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT WILL LINKSYS BE LIABLE FOR ANY LOST DATA, REVENUE OR PROFIT, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, REGARDLESS OF THE THEORY OF LIABILITY (INCLUDING NEGLIGENCE), ARISING OUT OF OR RELATED TO THE USE OF OR INABILITY TO USE THE PRODUCT (INCLUDING ANY SOFTWARE), EVEN IF LINKSYS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL LINKSYS LIABILITY EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT. The foregoing limitations will apply even if any warranty or remedy provided under this Agreement fails of its essential purpose. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to You. Please direct all inquiries to: Linksys, P.O. Box 18558, Irvine, CA 92623. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna Increase the separation between the equipment or devices Connect the equipment to an outlet other than the receivers Consult a dealer or an experienced radio/TV technician for assistance FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For operation within 5.15 ~ 5.25GHz frequency range, it is restricted to indoor environment. 17 Appendix D Warranty and Regulatory Information Safety Notices WARNING: This product contains lead, known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. Caution: To reduce the risk of fire, use only No.26 AWG or larger telecommunication line cord. Do not use this product near water, for example, in a wet basement or near a swimming pool. Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 through 11. This equipment has been SAR-evaluated for use in notebooks with side slot configuration. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Industry Canada Statement Operation is subject to the following two conditions:

This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the Declaration dIndustrie Canada Le fonctionnement est soumis aux conditions suivantes:

Ce peripherique ne doit pas causer dinterferences Ce peripherique doit accepter doit accepter toutes les interferences recues, y compris celles qui risquent dentrainer un fonctionnement indesirable. Industry Canada Radiation Exposure Statement:

This equipment complies with Canada radiation exposure limits set forth for uncontrolled environments. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Avis dIndustrie Canada concernant radiofrquences :

Ce matriel est conforme aux limites tablies par IC en matire dexposition aux radiofrquences dans un environnement non contrl. Lmetteur ne doit pas tre plac prs dune autre antenne ou dun autre metteur, ou fonctionner avec une autre antenne ou un autre metteur. The WPC600N has disable the 5600-5650M band by S/W to avoid 5600-5650M band for IC certification. IC statement

(i) the device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems;

(ii) the maximum antenna gain 1.2 dBi permitted (for devices in the bands 5250-5350 MHz and 5470-5725 MHz) to comply with the e.i.r.p. limit; and

(iii) the maximum antenna gain 1.2 dBi permitted (for devices in the band 5725-5825 MHz) to comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate, as stated in section A9.2(3) In addition, users should also be cautioned to take note that high-power radars are allocated as primary users (meaning they have priority) of the bands 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices. Dual Band Wireless-N Notebook Adapter Wireless Disclaimer The maximum performance for wireless is derived from IEEE Standard 802.11 specifications. Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage. Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions. Avis de non-responsabilit concernant les appareils sans fil Les performances maximales pour les rseaux sans fil sont tires des spcifications de la norme IEEE 802.11. Les performances relles peuvent varier, notamment en fonction de la capacit du rseau sans fil, du dbit de la transmission de donnes, de la porte et de la couverture. Les performances dpendent de facteurs, conditions et variables multiples, en particulier de la distance par rapport au point daccs, du volume du trafic rseau, des matriaux utiliss dans le btiment et du type de construction, du systme dexploitation et de la combinaison de produits sans fil utiliss, des interfrences et de toute autre condition dfavorable. lexposition aux 18 Appendix D Warranty and Regulatory Information User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment

(WEEE) This document contains important information for users with regards to the proper disposal and recycling of Linksys products. Consumers are required to comply with this notice for all electronic products bearing the following symbol:

English - Environmental Information for Customers in the European Union European Directive 2002/96/EC requires that the equipment on the product and/or its packaging must bearing this symbol not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. For more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop where you purchased the product.

(Bulgarian)

2002/96/EC ,

, . Cetina (Czech) - Informace o ochran ivotnho prosted pro zkaznky v zemch Evropsk unie Evropsk smrnice 2002/96/ES zakazuje, aby zazen oznaen tmto symbolem na produktu anebo na obalu bylo likvidovno s netdnm komunlnm odpadem. Tento symbol udv, e dan produkt mus bt likvidovn oddlen od bnho komunlnho odpadu. Odpovdte za likvidaci tohoto produktu a dalch elektrickch a elektronickch zazen prostednictvm urench sbrnch mst stanovench vldou nebo mstnmi ady. Sprvn likvidace a recyklace pomh pedchzet potencilnm negativnm dopadm na ivotn prosted a lidsk zdrav. Podrobnj informace o likvidaci starho vybaven si laskav vydejte od mstnch ad, podniku zabvajcho se likvidac komunlnch odpad nebo obchodu, kde jste produkt zakoupili. Dansk (Danish) - Miljinformation for kunder i EU EU-direktiv 2002/96/EF krver, at udstyr der brer dette symbol p produktet og/eller emballagen ikke m bortskaffes som usorteret kommunalt affald. Symbolet betyder, at dette produkt skal bortskaffes adskilt fra det almindelige husholdningsaffald. Det er dit ansvar at bortskaffe dette og andet elektrisk og elektronisk udstyr via bestemte indsamlingssteder udpeget af staten eller de lokale myndigheder. Korrekt bortskaffelse og genvinding vil hjlpe med til at undg mulige skader for miljet og menneskers sundhed. Kontakt venligst de lokale myndigheder, renovationstjenesten eller den butik, hvor du har kbt produktet, angende mere detaljeret information om bortskaffelse af dit gamle udstyr. Deutsch (German) - Umweltinformation fr Kunden innerhalb der Europischen Union Die Europische Richtlinie 2002/96/EC verlangt, dass technische Ausrstung, die direkt am Gert und/oder an der Verpackung mit diesem Symbol versehen ist

, nicht zusammen mit unsortiertem Gemeindeabfall entsorgt werden darf. Das Symbol weist darauf hin, dass das Produkt von regulrem Haushaltmll getrennt entsorgt werden sollte. Es liegt in Ihrer Verantwortung, dieses Gert und andere elektrische und elektronische Gerte ber die dafr zustndigen und von der Regierung oder rtlichen Behrden dazu bestimmten Sammelstellen zu entsorgen. Ordnungsgemes Entsorgen und Recyceln trgt dazu bei, potentielle negative Folgen fr Umwelt und die menschliche Gesundheit zu vermeiden. Wenn Sie weitere Informationen zur Entsorgung Ihrer Altgerte bentigen, wenden Sie sich bitte an die rtlichen Behrden oder stdtischen Entsorgungsdienste oder an den Hndler, bei dem Sie das Produkt erworben haben. Dual Band Wireless-N Notebook Adapter 19 Appendix D Warranty and Regulatory Information informatsioon Eesti (Estonian) - Keskkonnaalane Euroopa Liidus asuvatele klientidele Euroopa Liidu direktiivi 2002/96/E nuete kohaselt on

, seadmeid, millel on tootel vi pakendil kesolev smbol keelatud krvaldada koos sorteerimata olmejtmetega. See smbol nitab, et toode tuleks krvaldada eraldi tavalistest olmejtmevoogudest. Olete kohustatud krvaldama kesoleva ja ka muud elektri- ja elektroonikaseadmed riigi vi kohalike ametiasutuste poolt ette nhtud kogumispunktide kaudu. Seadmete korrektne krvaldamine ja ringlussevtt aitab vltida vimalikke negatiivseid tagajrgi keskkonnale ning inimeste tervisele. Vanade seadmete krvaldamise kohta tpsema informatsiooni saamiseks vtke palun hendust kohalike ametiasutustega, jtmekitlusfirmaga vi kauplusega, kust te toote ostsite. Espaol (Spanish) - Informacin medioambiental para clientes de la Unin Europea La Directiva 2002/96/CE de la UE exige que los equipos que lleven este smbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El smbolo indica que el producto en cuestin debe separarse de los residuos domsticos convencionales con vistas a su eliminacin. Es responsabilidad suya desechar este y cualesquiera otros aparatos elctricos y electrnicos a travs de los puntos de recogida que ponen a su disposicin el gobierno y las autoridades locales. Al desechar y reciclar correctamente estos aparatos estar contribuyendo a evitar posibles consecuencias negativas para el medio ambiente y la salud de las personas. Si desea obtener informacin ms detallada sobre la eliminacin segura de su aparato usado, consulte a las autoridades locales, al servicio de recogida y eliminacin de residuos de su zona o pregunte en la tienda donde adquiri el producto.

(Greek)

2002/96/EC

. Franais (French) - Informations environnementales pour les clients de lUnion europenne La directive europenne 2002/96/CE exige que lquipement sur lequel est appos ce symbole sur le produit et/ou son emballage ne soit pas jet avec les autres ordures mnagres. Ce symbole indique que le produit doit tre limin dans un circuit distinct de celui pour les dchets des mnages. Il est de votre responsabilit de jeter ce matriel ainsi que tout autre matriel lectrique ou lectronique par les moyens de collecte indiqus par le gouvernement et les pouvoirs publics des collectivits territoriales. Llimination et le recyclage en bonne et due forme ont pour but de lutter contre limpact nfaste potentiel de ce type de produits sur lenvironnement et la sant publique. Pour plus dinformations sur le mode dlimination de votre ancien quipement, veuillez prendre contact avec les pouvoirs publics locaux, le service de traitement des dchets, ou lendroit o vous avez achet le produit. Italiano (Italian) - Informazioni relative allambiente per i clienti residenti nellUnione Europea La direttiva europea 2002/96/EC richiede che le apparecchiature contrassegnate con questo simbolo sul prodotto e/o sullimballaggio non siano smaltite insieme ai rifiuti urbani non differenziati. Il simbolo indica che questo prodotto non deve essere smaltito insieme ai normali rifiuti domestici. responsabilit del proprietario smaltire sia questi prodotti sia le altre apparecchiature elettriche ed elettroniche mediante le specifiche strutture di raccolta indicate dal governo o dagli enti pubblici locali. Il corretto smaltimento ed il riciclaggio aiuteranno a prevenire conseguenze potenzialmente negative per lambiente e per la salute dellessere umano. Per ricevere informazioni pi dettagliate circa lo smaltimento delle vecchie apparecchiature in Vostro possesso, Vi invitiamo a contattare gli enti pubblici di competenza, il servizio di smaltimento rifiuti o il negozio nel quale avete acquistato il prodotto. Latvieu valoda (Latvian) - Ekoloiska informcija klientiem Eiropas Savienbas jurisdikcij Direktv 2002/96/EK ir prasba, ka aprkojumu, kam pievienota uz paa izstrdjuma vai uz t iesaiojuma, nedrkst zme izmest neirot veid kop ar komunlajiem atkritumiem

(tiem, ko rada vietji iedzvotji un uzmumi). zme nozm to, ka ierce ir jizmet atkritumos t, lai t nenonktu kop ar parastiem mjsaimniecbas atkritumiem. Jsu pienkums ir o un citas elektriskas un elektroniskas ierces izmest atkritumos, izmantojot paus atkritumu savkanas veidus un ldzekus, ko nodroina valsts un pavaldbu iestdes. Ja izmeana atkritumos un prstrde tiek veikta pareizi, tad mazins iespjamais kaitjums dabai un cilvku veselbai. Skkas zias par novecojua aprkojuma izmeanu atkritumos js varat saemt vietj pavaldb, atkritumu savkanas dienest, k ar veikal, kur iegdjties o izstrdjumu. Dual Band Wireless-N Notebook Adapter 20 Appendix D Warranty and Regulatory Information Lietuvkai (Lithuanian) - Aplinkosaugos informacija, skirta Europos Sjungos vartotojams Europos direktyva 2002/96/EC numato, kad rangos, kuri ir kurios pakuot yra paymta iuo simboliu (veskite simbol), negalima alinti kartu su neriuotomis komunalinmis atliekomis. is simbolis rodo, kad gamin reikia alinti atskirai nuo bendro buitini atliek srauto. Js privalote utikrinti, kad i ir kita elektros ar elektronin ranga bt alinama per tam tikras nacionalins ar vietins valdios nustatytas atliek rinkimo sistemas. Tinkamai alinant ir perdirbant atliekas, bus ivengta galimos alos aplinkai ir moni sveikatai. Daugiau informacijos apie js senos rangos alinim gali pateikti vietins valdios institucijos, atliek alinimo tarnybos arba parduotuvs, kuriose sigijote t gamin. Malti (Maltese) - Informazzjoni Ambjentali gal Klijenti fl-Unjoni Ewropea Id-Direttiva Ewropea 2002/96/KE titlob li t-tagmir li jkun fih is-

simbolu fuq il-prodott u/jew fuq l-ippakkjar ma jistax jintrema ma skart muniipali li ma iex isseparat. Is-simbolu jindika li dan il-prodott gandu jintrema separatament minn ma l-

iskart domestiku regolari. Hija responsabbilt tiegek li tarmi dan it-tagmir u kull tagmir ieor ta l-elettriku u elettroniku permezz ta failitajiet ta bir appuntati apposta mill-gvern jew mill-awtoritajiet lokali. Ir-rimi bmod korrett u r-riikla jgin jipprevjeni konsegwenzi negattivi potenzjali gall-ambjent u gas-saa tal-bniedem. Gal aktar informazzjoni dettaljata dwar ir-rimi tat-tagmir antik tiegek, jekk jogbok ikkuntattja lill-awtoritajiet lokali tiegek, is-servizzi gar-rimi ta l-iskart, jew il-anut minn fejn xtrajt il-prodott. Magyar (Hungarian) - Krnyezetvdelmi informci az eurpai unis vsrlk szmra A 2002/96/EC szm eurpai unis irnyelv megkvnja, hogy azokat a termkeket, amelyeken, s/vagy amelyek csomagolsn az albbi cmke megjelenik, tilos a tbbi szelektlatlan lakossgi hulladkkal egytt kidobni. A cmke azt jelli, hogy az adott termk kidobsakor a szokvnyos hztartsi hulladkelszlltsi rendszerektl elklntett eljrst kell alkalmazni. Az n felelssge, hogy ezt, s ms elektromos s elektronikus berendezseit a kormnyzati vagy a helyi hatsgok ltal kijellt gyjtredszereken keresztl szmolja fel. A megfelel hulladkfeldolgozs segt a krnyezetre s az emberi egszsgre potencilisan rtalmas negatv hatsok megelzsben. Ha elavult berendezseinek felszmolshoz tovbbi rszletes informcira van szksge, krjk, lpjen kapcsolatba a helyi hatsgokkal, a hulladkfeldolgozsi szolglattal, vagy azzal zlettel, ahol a termket vsrolta. Nederlands (Dutch) - Milieu-informatie voor klanten in de Europese Unie De Europese Richtlijn 2002/96/EC schrijft voor dat apparatuur die is voorzien van dit symbool op het product of de verpakking, niet mag worden ingezameld met niet-gescheiden huishoudelijk afval. Dit symbool geeft aan dat het product apart moet worden ingezameld. U bent zelf verantwoordelijk voor de vernietiging van deze en andere elektrische en elektronische apparatuur via de daarvoor door de landelijke of plaatselijke overheid aangewezen inzamelingskanalen. De juiste vernietiging en recycling van deze apparatuur voorkomt mogelijke negatieve gevolgen voor het milieu en de gezondheid. Voor meer informatie over het vernietigen van uw oude apparatuur neemt u contact op met de plaatselijke autoriteiten of afvalverwerkingsdienst, of met de winkel waar u het product hebt aangeschaft. Norsk (Norwegian) - Miljinformasjon for kunder i EU EU-direktiv 2002/96/EF krever at utstyr med flgende symbol avbildet p produktet og/eller pakningen, ikke m kastes sammen med usortert avfall. Symbolet indikerer at dette produktet skal hndteres atskilt fra ordinr avfallsinnsamling for husholdningsavfall. Det er ditt ansvar kvitte deg med dette produktet og annet elektrisk og elektronisk avfall via egne innsamlingsordninger slik myndighetene eller kommunene bestemmer. Korrekt avfallshndtering og gjenvinning vil vre med p forhindre mulige negative konsekvenser for milj og helse. For nrmere informasjon om hndtering av det kasserte utstyret ditt, kan du ta kontakt med kommunen, en innsamlingsstasjon for avfall eller butikken der du kjpte produktet. Polski (Polish) - Informacja dla klientw w Unii Europejskiej o przepisach dotyczcych ochrony rodowiska Dyrektywa Europejska 2002/96/EC wymaga, aby sprzt oznaczony symbolem znajdujcym si na produkcie i/lub jego opakowaniu nie by wyrzucany razem z innymi niesortowanymi odpadami komunalnymi. Symbol ten wskazuje, e produkt nie powinien by usuwany razem ze zwykymi odpadami z gospodarstw domowych. Na Pastwu spoczywa obowizek wyrzucania innych urzdze elektrycznych oraz elektronicznych w punktach odbioru wyznaczonych przez wadze krajowe lub lokalne. Pozbywanie si sprztu we waciwy sposb i jego recykling pomog zapobiec potencjalnie negatywnym konsekwencjom dla rodowiska i zdrowia ludzkiego. W celu uzyskania szczegowych informacji o usuwaniu starego sprztu, prosimy zwrci si do lokalnych wadz, sub oczyszczania miasta lub sklepu, w ktrym produkt zosta nabyty. tego i Dual Band Wireless-N Notebook Adapter 21 Appendix D Warranty and Regulatory Information Portugus (Portuguese) - Informao ambiental para clientes da Unio Europeia A Directiva Europeia 2002/96/CE exige que o equipamento que exibe este smbolo no produto e/ou na sua embalagem no seja eliminado junto com os resduos municipais no separados. O smbolo indica que este produto deve ser eliminado separadamente dos resduos domsticos regulares. da sua responsabilidade eliminar este e qualquer outro equipamento elctrico e electrnico atravs das instalaes de recolha designadas pelas autoridades governamentais ou locais. A eliminao e reciclagem correctas ajudaro a prevenir as consequncias negativas para o ambiente e para a sade humana. Para obter informaes mais detalhadas sobre a forma de eliminar o seu equipamento antigo, contacte as autoridades locais, os servios de eliminao de resduos ou o estabelecimento comercial onde adquiriu o produto. Romn (Romanian) - Informaii de mediu pentru clienii din Uniunea European Directiva european 2002/96/CE impune ca echipamentele care pe produs i/sau pe ambalajul acestuia s prezint acest simbol nu fie casate mpreun cu gunoiul menajer municipal. Simbolul indic faptul c acest produs trebuie s fie casat separat de gunoiul menajer obinuit. Este responsabilitatea dvs. s casai acest produs i alte echipamente electrice i electronice prin intermediul unitilor de colectare special desemnate de guvern sau de autoritile locale. Casarea i reciclarea corecte vor ajuta la prevenirea potenialelor consecine negative asupra sntii mediului i a oamenilor. Pentru mai multe informaii detaliate cu privire la casarea acestui echipament vechi, contactai autoritile locale, serviciul de salubrizare sau magazinul de la care ai achiziionat produsul. Slovenina (Slovak) - Informcie o ochrane ivotnho prostredia pre zkaznkov v Eurpskej nii Poda eurpskej smernice 2002/96/ES zariadenie s tmto symbolom na produkte a/alebo jeho balen nesmie by likvidovan spolu s netriedenm komunlnym odpadom. Symbol znamen, e produkt by sa mal likvidova oddelene od benho odpadu z domcnost. Je vaou povinnosou likvidova toto i ostatn elektrick a elektronick zariadenia prostrednctvom pecializovanch zbernch zariaden urench vldou alebo miestnymi orgnmi. Sprvna likvidcia a recyklcia pome zabrni prpadnm negatvnym dopadom na ivotn prostredie a zdravie ud. Ak mte zujem o podrobnejie informcie o likvidcii starho zariadenia, obrte sa, prosm, na miestne orgny, organizcie zaoberajce sa likvidciou odpadov alebo obchod, v ktorom ste si produkt zakpili. Slovenina (Slovene) - Okoljske informacije za stranke v Evropski uniji Evropska direktiva 2002/96/EC prepoveduje odlaganje opreme, oznaene s tem simbolom na izdelku in/ali na embalai med obiajne, nerazvrene odpadke. Ta simbol opozarja, da je treba izdelek odvrei loeno od preostalih gospodinjskih odpadkov. Vaa odgovornost je, da to in preostalo elektrino in elektronsko opremo odnesete na posebna zbiralia, ki jih doloijo dravne ustanove ali lokalna uprava. S pravilnim odlaganjem in recikliranjem boste prepreili morebitne kodljive vplive na okolje in zdravje ljudi. e elite izvedeti ve o odlaganju stare opreme, se obrnite na lokalno upravo, odpad ali trgovino, kjer ste izdelek kupili. Suomi (Finnish) - Ymprist koskevia tietoja EU-

alueen asiakkaille EU-direktiivi 2002/96/EY edellytt, ett jos laitteistossa on tm symboli itse tuotteessa ja/tai sen pakkauksessa, laitteistoa ei saa hvitt lajittelemattoman yhdyskuntajtteen mukana. Symboli merkitsee sit, ett tm tuote on hvitettv erilln tavallisesta kotitalousjtteest. Sinun vastuullasi on hvitt tm elektroniikkatuote ja muut vastaavat elektroniikkatuotteet viemll tuote tuotteet viranomaisten mrmn keryspisteeseen. Laitteiston oikea hvittminen est mahdolliset kielteiset vaikutukset ympristn ja ihmisten terveyteen. Listietoja vanhan laitteiston oikeasta hvitystavasta saa paikallisilta viranomaisilta, jtteenhvityspalvelusta tai siit myymlst, josta ostit tuotteen. tai Svenska (Swedish) - Miljinformation fr kunder i Europeiska unionen Det europeiska direktivet 2002/96/EC krver att utrustning med denna symbol p produkten och/eller frpackningen inte fr kastas med osorterat kommunalt avfall. Symbolen visar att denna produkt br kastas efter att den avskiljts frn vanligt hushllsavfall. Det faller p ditt ansvar att kasta denna och annan elektrisk och elektronisk utrustning p faststllda insamlingsplatser utsedda av regeringen eller lokala myndigheter. Korrekt kassering och tervinning skyddar mot eventuella negativa konsekvenser fr miljn och personhlsa. Fr mer detaljerad information om kassering av din gamla utrustning kontaktar du dina lokala myndigheter, avfallshanteringen eller butiken dr du kpte produkten. WEB: For additional information, please visit www.linksys.com Dual Band Wireless-N Notebook Adapter 7012310NC-RR 22