all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User Manual | Users Manual | 2.38 MiB | August 02 2012 | |||
1 2 | Attestation Statements | August 02 2012 | ||||||
1 2 | Cover Letter(s) | August 02 2012 | ||||||
1 2 | Cover Letter(s) | August 02 2012 | ||||||
1 2 | Cover Letter(s) | August 02 2012 | ||||||
1 2 | External Photos | August 02 2012 | ||||||
1 2 | Internal Photos | August 02 2012 | ||||||
1 2 | ID Label/Location Info | August 02 2012 | ||||||
1 2 | ID Label/Location Info | August 02 2012 | ||||||
1 2 | RF Exposure Info | August 02 2012 | ||||||
1 2 | Test Report | August 02 2012 | ||||||
1 2 | Test Report | August 02 2012 | ||||||
1 2 | Test Setup Photos | August 02 2012 |
1 2 | User Manual | Users Manual | 2.38 MiB | August 02 2012 |
User Guide Linksys EA-Series Linksys EA-Series Table of Contents Table of Contents Product overview EA2700/EA3500 1 1 1 EA4500 2 2 2 Back view Bottom view Top view Back view Setting Up Your EA-Series Router Where to find more help 3 How to set up your router 3 3 3 How to manually set up your router 3 How to start Cisco Connect Use Cisco Connect to manage your router Advanced Configuration How to open the browser-based utility 4 Setup > Basic Setup 5 5 5 Wireless > Wireless Settings 6 6 Language Internet Setup Wireless Settings Wireless Security Wireless > Wireless Security 7 7 7 7 Personal options Office options Option settings Troubleshooting How to run Cisco Connect after setup 10 Your router was not successfully set up 11 Get Windows XP Service Pack 3 message 11 Your Internet cable is not plugged in message 12 Cannot access your router message 13 Device not found message 14 Specifications Linksys EA2700 16 Linksys EA3500 17 Linksys EA4500 18 i i Linksys EA-Series Product overview EA2700/EA3500 Back view Product overview Power indicatorStays on steadily while power is connected and following a successful Wi-Fi Protected Setup connection Flashes slowly during bootup, during firmware upgrades, and during a Wi-Fi Protected Setup connection Flashes quickly when there is a Wi-Fi Protected Setup error PowerConnect the included AC power adapter to this port CAUTIon Use only the adapter that came with your router Power buttonPress | (on) to turn on the router Bottom view USB port (EA3500 only) Internet port Power indicator Ethernet ports Wi-Fi Protected Setup button Power port Your routers appearance may vary USB port (EA3500 only)To easily share disk storage with other users on your network or on the Internet, connect a USB drive to this port Ethernet portsConnect Ethernet cables (also called network cables) to these Gigabit (10/100/1000) ports, color coded blue, and to other wired Ethernet network devices on your network Internet portConnect an Ethernet cable (also called a network or Internet cable) to this port, color coded yellow, and to your modem Wi-Fi Protected Setup buttonPress this button to easily configure wireless security on Wi-Fi Protected Setup-enabled network devices For more information, see Wireless Security on page 8 Your routers appearance may vary Reset buttonPress and hold this button for 5-15 seconds (until the port lights flash at the same time) to reset the router to its factory defaults You can also restore the defaults using the browser-based utility 1 1 Linksys EA-Series EA4500 Top view Indicator light Indicator lightStays on steadily while power is connected and following a successful Wi-Fi Protected Setup connection Pulses slowly during bootup, during firmware upgrades, and during a Wi-Fi Protected Setup connection Flashes quickly when there is a Wi-Fi Protected Setup error Product overview Back view Ethernet ports Internet port Power port Wi-Fi Protected Setup button Reset button USB port Ethernet portsConnect Ethernet cables (also called network cables) to these Gigabit (10/100/1000) ports, color coded blue, and to other wired Ethernet network devices on your network Internet portConnect an Ethernet cable (also called a network or Internet cable) to this port, color coded yellow, and to your modem Wi-Fi Protected Setup buttonPress this button to easily configure wireless security on Wi-Fi Protected Setup-enabled network devices For more information, see Wireless Security on page 8 USB portTo easily share disk storage with other users on your network or on the Internet, connect a USB drive to this port Reset buttonPress and hold this button for 5-15 seconds (until the port lights flash at the same time) to reset the router to its factory defaults You can also restore the defaults using the browser-based utility PowerConnect the included AC power adapter to this port CAUTIon Use only the adapter that came with your router Power buttonPress | (on) to turn on the router 2 Linksys EA-Series Setting Up Your EA-Series Router Setting Up Your EA-Series Router Where to find more help In addition to this User Guide, you can find help at these locations:
Linksys.com/support (documentation, downloads, FAQs, technical support, live chat, forums) Cisco Connect help (run Cisco Connect, then click Learn More where available) Browser-based utility context-sensitive help (open the utility, then click Help in the right-side column ) How to set up your router The easiest and fastest way to set up your router is to run the Cisco Connect setup software How to start Cisco Connect When you run the setup CD, Cisco Connect (your routers setup software) is automatically installed onto your computer You can then use Cisco Connect to easily manage your router noTE:
If you lose your setup CD, you can download the software from Linksys.com/support To start Cisco Connect for the first time:
Insert the CD into your CD or DVD drive 1. 2. Click Set up your Linksys Router If you do not see this:
For Windows, click Start, Computer, then double-click the CD drive and the Setup icon For Mac, double-click the CD icon on your desktop, then double-click the Setup icon 3. Follow the on-screen instructions to complete your router setup Use Cisco Connect to manage your router After your router has been set up and Cisco Connect has been installed, you can use Cisco Connect to easily manage many of your routers settings such as:
Test your Internet connection speed Connect devices to your network Configure parental controls Change your routers name and password Set up guest access How to manually set up your router After setting up the router with the setup software (located on the CD), the router will be ready for use If you would like to change its advanced settings, or if the software does not run, use the routers browser-based utility You can access the utility with a web browser on a computer connected to the router For more information on using the utility, see How to open the browser-based utility on page 3 3 3 Linksys EA-Series Advanced Configuration Advanced Configuration How to open the browser-based utility To access some advanced settings, you need to open the browser-based utility To open the browser-based utility:
1. Run Cisco Connect, click Change under Router settings, click Advanced settings, then click oK or Open a web browser on a computer connected to your network, then go to 192.168.1.1 The router prompts you for a user name and password 2. Enter the user name and password, then click oK The utilitys main menu opens TIPS If you set up your router without using Cisco Connect, your routers default username and password is admin If you used Cisco Connect to set up your router, you can see your routers user name and password by running Cisco Connect, then clicking Router settings 4 4 Linksys EA-Series Advanced Configuration Setup > Basic Setup The first screen that appears is the Basic Setup screen This allows you to change the routers general settings Internet Setup The Internet Setup section configures the router to your Internet connection Most of this information can be obtained through your Internet Service Provider (ISP) Internet Connection Type Select the type of Internet connection your ISP provides from the drop-down menu The available types are:
PPPoE Static IP Automatic Configuration - DHCP Bridge Mode PPTP L2TP Language Select your language To use a different language, select one from the drop-
down menu The language of the browser-based utility will change five seconds after you select another language Automatic Configuration - DHCP The default Internet Connection Type is Automatic Configuration - DHCP
(Dynamic Host Configuration Protocol) Keep the default only if your ISP supports DHCP or if you connect using a dynamic IP address (This option usually applies to cable connections ) Static IP If you are required to use a fixed IP address to connect to the Internet, select Static IP PPPoE If you have a DSL connection, check whether your ISP uses Point-to-Point Protocol over Ethernet (PPPoE) If so, select PPPoE PPTP Point-to-Point Tunneling Protocol (PPTP) is a service that generally applies to connections in Europe If your PPTP connection supports DHCP or a dynamic IP address, then select obtain an IP Address Automatically If you are required to use a fixed IP address to connect to the Internet, then select Specify an IP Address and configure the options below 5 Linksys EA-Series Advanced Configuration L2TP Layer 2 Tunneling Protocol (L2TP) is a service that generally applies to connections in Israel Connect on Demand or Keep Alive The Connect on Demand and Keep Alive options let you choose whether the router connects to the Internet only as needed (useful if your ISP charges for connect time), or if the router should always be connected Select the appropriate option Wireless > Wireless Settings The settings for wireless networking are set on this screen noTE After you set up the wireless network(s), set up the wireless security settings Wireless Settings network Mode Select the wireless standards your network will support Mixed If you have Wireless-N (2 4 GHz), Wireless-G, and Wireless-B devices in your network, keep the default, Mixed Wireless-B/G only If you have both Wireless-B and Wireless-G (2 4 GHz) devices in your network, select Wireless-B/G only Wireless-B only If you have only Wireless-B devices, select Wireless-B only Wireless-G only If you have only Wireless-G devices, select Wireless-G only Wireless-n only If you have only Wireless-N (2 4 GHz) devices, select Wireless-n only Disabled If you have no Wireless-B, Wireless-G, and Wireless-N (2 4 GHz) devices in your network, select Disabled noTE If you have a dual-band router, you can select Mixed, Wireless-A Only, Wireless-N Only, or Disabled for the 5 GHz band If you are not sure which mode to use, keep the default, Mixed network name (SSID) The Service Set Identifier (SSID) is the network name shared by all devices in a wireless network It is case-sensitive and must not exceed 32 keyboard characters The default is Cisco followed by the last 5 digits of the routers serial number, which is found on the bottom of the router If you used the setup software for installation, then the default Network Name is changed to an easy-to-remember name noTE If you restore the routers factory default settings (by pressing the Reset button or using the Administration > Factory Defaults screen), the Network Name will return to its default value Change the Network Name back to its original name, or you will have to reconnect all devices on your wireless network to the new network name Channel Width For best performance in a network using Wireless-B, Wireless-G and Wireless-N (2 4 GHz) devices, select Auto (20 MHz or 40 MHz) For a channel width of 20 MHz, select 20 MHz only Channel Select the channel from the drop-down list for Wireless-B, Wireless-G, and Wireless-N (2 4 GHz) networking If you are not sure which channel to select, then keep the default, Auto SSID Broadcast When wireless clients survey the local area for wireless networks to associate with, they will detect the SSID broadcast by the router To broadcast the routers SSID, keep the default, Enabled If you do not want to broadcast the routers SSID, then select Disabled 6 Linksys EA-Series Wireless Security Wireless > Wireless Security The wireless security settings configure the security of your wireless network(s) The router supports the following wireless security options: WPA2/WPA Mixed Mode, WPA2 Personal, WPA Personal, WPA2/WPA Enterprise Mixed Mode, WPA2 Enterprise, WPA Enterprise, WEP, and RADIUS (WPA stands for Wi-Fi Protected Access WEP stands for Wireless Equivalent Privacy RADIUS stands for Remote Authentication Dial-In User Service ) Personal options Security option WPA2 Personal WPA2/WPA Mixed Mode WPA Personal WEP Strength Strongest WPA2: Strongest WPA: Strong Strong Basic Wireless Security Option settings WPA2/WPA Mixed Mode, WPA2 Personal, WPA Personal noTES If you select WPA2/WPA Mixed Mode as your Security Mode, each device in your wireless network MUST use WPA2/WPA and the same passphrase If you select WPA2 Personal as your Security Mode, each device in your wireless network MUST use WPA2 Personal and the same passphrase If you select WPA Personal as your Security Mode, each device in your wireless network MUST use WPA Personal and the same passphrase Office options The office options are available for networks that use a RADIUS server for authentication The office options are stronger than the personal options because WPA2 or WPA provides encryption while RADIUS provides authentication Passphrase Enter a passphrase of 8-63 characters The default is password If you used the setup software for installation, then the default is changed to a unique passphrase, which you can find by running Cisco Connect, then clicking Router settings Security option WPA2 Enterprise WPA2/WPA Enterprise Mixed Mode WPA Enterprise RADIUS Strength Strongest WPA2: Strongest WPA: Strong Strong Basic 7 7 Linksys EA-Series Wireless Security WPA2/WPA Enterprise Mixed Mode, WPA2 Enterprise, WPA Enterprise These option is used in coordination with a RADIUS server (These should only be used when a RADIUS server is connected to the router ) noTES If you select WPA2/WPA Enterprise Mixed Mode as your Security Mode, each device in your wireless network MUST use WPA2/WPA Enterprise and the same shared key If you select WPA2 Enterprise as your Security Mode, each device in your wireless network MUST use WPA2 Enterprise and the same shared key If you select WPA Enterprise as your Security Mode, each device in your wireless network MUST use WPA Enterprise and the same shared key RADIUS Server Enter the IP address of the RADIUS server RADIUS Port Enter the port number of the RADIUS server The default is 1812 Shared Key Enter the key shared between the router and the server WEP WEP is a basic encryption method, which is not as secure as WPA noTE:
If you select WEP as your Security Mode, each device in your wireless network MUST use WEP and the same encryption and shared key Encryption Select a level of WEP encryption, (40/64-bit 10 hex digits) or 104/128-bit (26 hex digits) The default is 40/64-bit (10 hex digits) Passphrase Enter a passphrase to automatically generate WEP keys Then click Generate Key 1-4 If you did not enter a passphrase, enter the WEP key(s) manually TX Key Select a default TX (Transmit) Key to use The default is 1 8 Linksys EA-Series Wireless Security RADIUS This option features WEP used in coordination with a RADIUS server (This should only be used when a RADIUS server is connected to the router ) noTE:
If you select RADIUS as your Security Mode, each device in your wireless network MUST use RADIUS and the same encryption and shared key Disabled If you choose to disable wireless security, you will be informed that wireless security is disabled when you first attempt to access the Internet You will given the option to enable wireless security, or confirm that you understand the risks but still wish to proceed without wireless security RADIUS Server Enter the IP address of the RADIUS server RADIUS Port Enter the port number of the RADIUS server The default is 1812 Shared Secret Enter the key shared between the router and the server Encryption Select a level of WEP encryption, (40/64-bit 10 hex digits) or 104/128-bit (26 hex digits) The default is 40/64-bit (10 hex digits) Passphrase Enter a passphrase to automatically generate WEP keys Then click Generate Key 1-4 If you did not enter a passphrase, enter the WEP key(s) manually TX Key Select a default TX (Transmit) Key to use The default is 1 9 Linksys EA-Series Troubleshooting Troubleshooting This chapter can help you solve common setup issues and connect to the Internet Your routers CD includes Cisco Connect, the router setup software that makes it easy to connect network devices, change router settings, control guest access, enable parental controls, and connect to the Internet Cisco Connect is also installed onto your computer during setup If Cisco Connect is prevented from completing the setup, this chapter will guide you through finding solutions How to run Cisco Connect after setup When you run the setup CD, Cisco Connect is automatically installed onto your computer You can then use Cisco Connect to easily manage your network To start Cisco Connect on a Windows computer:
1. Click Start, All Programs, then click Cisco Connect You can find more help from our award-winning customer support at linksys.com/support. The Cisco Connect main menu opens To start Cisco Connect on a Mac oS X computer:
1. Open Finder and click Applications in the left panel 2. Double-click the Cisco Connect icon The Cisco Connect main menu opens 10 10 Linksys EA-Series Troubleshooting Your router was not successfully set up If Cisco Connect did not complete the setup, you can try the following:
Press and hold the Reset button on your router with a paperclip or pin for 5-15 seconds, then run the Setup program again on the routers CD Temporarily disable your computers firewall (see the security softwares instructions for help), then run the Setup program again on the routers CD If you have another computer, use that computer to run the Setup program again on the routers CD Get Windows XP Service Pack 3 message On Windows XP computers, Cisco Connect requires Service Pack 3 in order to work If you receive a Get Windows Service Pack 3 message when setting up your router for the first time, follow these troubleshooting steps If the currently installed Service Pack is older than version 3, you need to download and install Service Pack 3 TIP To temporarily connect to the Internet and download the required Service Pack, you can use the included Ethernet cable to connect your computer directly to your modem To install Service Pack 3:
1. Click the link in the Cisco Connect error message or connect to the Microsoft Update website (update.microsoft.com/windowsupdate) 2. Follow the instructions on the website or contact Microsoft if you need further help Your routers appearance may vary 3. After downloading and installing Service Pack 3, run the Setup program on your routers CD 11 Linksys EA-Series Troubleshooting Your Internet cable is not plugged in message If you get a Your Internet cable is not plugged in message when trying to set up your router, follow these troubleshooting steps Back view of cable modem To fix the problem:
1. Make sure that an Ethernet or Internet cable (or a cable like the one supplied with your router) is securely connected to the yellow Internet port on the back of the router and to the appropriate port on your modem This port on the modem is usually labeled Ethernet, but may be named Internet or WAn Back view of DSL modem 2. 3. 4. 5. Make sure that your modem is connected to power and is turned on If it has a power switch, make sure that it is set to the on or l position If your Internet service is cable, verify that the cable modems CABLE port is connected to the coaxial cable provided by your ISP Or, if your Internet service is DSL, make sure that the DSL phone line is connected to the modems DSL port If your computer was previously connected to your modem with a USB cable, disconnect the USB cable Return to the Cisco Connect window and click next to try again If the window has already been closed, run the Setup program again on the routers CD Back view of router 12 Linksys EA-Series Troubleshooting Cannot access your router message If you cannot access your router because your computer is not connected to your network, follow these troubleshooting steps 3. Click your own network name, then click Connect In the example below, the computer was connected to another wireless network named JimsRouter The name of the Linksys E-Series network, BronzeEagle in this example, is shown selected To access your router, you must be connected to your own network If you currently have wireless Internet access, the problem may be that you have accidentally connected to a different wireless network To fix the problem on Windows computers:
1. On your Windows desktop, right-click the wireless icon in the system tray 4. If you are prompted to enter a network key, type your password (Security Key) into the network key and Confirm network key fields, then click Connect 2. Click View Available Wireless networks A list of available networks appears Your computer connects to the network, and you should now be able to access the router 13 Linksys EA-Series Troubleshooting To fix the problem on Mac computers:
1. In the menu bar across the top of the screen, click the AirPort icon A list of wireless networks appears Cisco Connect has automatically assigned your network a name In the example below, the computer was connected to another wireless network named JimsRouter The name of the Linksys E-Series network, BronzeEagle in this example, is shown selected Device not found message If you get a Device not found message when trying to connect a network device (such as an iPhone, iPod, or smartphone), follow these troubleshooting steps 2. Click the wireless network name of your Linksys E-Series router
(BronzeEagle in the example) 3. Type your wireless network password (Security Key) into the Password field, then click oK TIP For a stronger signal during initial setup, move your wireless devices near your router Long distances make it harder for the router to detect the devices To fix the problem:
1. Run Cisco Connect 14 Linksys EA-Series Troubleshooting 2. Click Computers and devices The Computers and other devices window appears 3. Click other Wireless devices Example: On your Smartphone or other wireless device, locate the Wi-
Fi menu and search for available wireless networks In this example, using the network information provided by Cisco Connect shown in the previous screen, click BronzeEagle 4. Enable your wireless network devices Wi-Fi connection, then search for your wireless network name See your device documentation for help noTE Your wireless device must support WPA/WPA2 5. On the wireless network device, select the network name of your router and enter the password (Security Key) In Cisco Connect, click next 6. Android iPhone 7. Enter the password (Security Key) provided by Cisco Connect In this example, the security key is B6eM9UkCjz noTE The password is case sensitive Make sure that you enter letters in the correct case 8. When your wireless device is successfully connected to your wireless network, enter a name for the device in Cisco Connect, then click Finish 15 Linksys EA-Series Specifications Linksys EA2700 Model Name Description Model Number Standards
# of Antennas Detachable (y/n) Switch Port Speed Modulation Receive Sensitivity
(Typical) Antenna Gain UPnP Security features Security key bits Linksys EA2700 Dual-Band N600 Router with Gigabit EA2700 802 11n, 802 11a, 802 11g, 802 11b, 802 3, 802 3u, 802 3ab 4 total, 2 internal antennas per each 2 4 GHz & 5 GHz radio band No 10/100/1000 Mbps (Gigabit Ethernet) 802 11b: CCK, QPSK, BPSK 802 11g: OFDM 802 11a: OFDM 802 11n: BPSK, QPSK, 16-QAM, 64-QAM 2 4 GHz 802 11b: -90 dBm @ 11 Mbps 802 11g: -75 dBm @ 54 Mbps 802 11n 20 MHz: -73 dBm @ MCS15 802 11n 40 MHz: -70 dBm @ MCS15 5 GHz 802 11a: -72 dBm @ 54 Mbps 802 11n 20 MHz: -70 dBm @ MCS15 802 11n 40 MHz: -67 dBm @ MCS15 2 4 GHz Antenna 1 3 45 dBi Antenna 2 2 46 dBi 5 GHz Antenna 1 4 41 dBi Antenna 2 5 15 dBi Supported WEP, WPA, WPA2 Up to 128-bit encryption Specifications Environmental Dimensions Unit Weight Power Certifications Operating Temp Storage Temp Operating Humidity Storage Humidity 174 x 190 x 28 mm
(6 85" x 7 48" x 1 10") 297 7 g (10 5 oz) 12V, 1A FCC, IC, CE, Wi-Fi A/B/G/N 0 to 40C (32 to 104F)
-20 to 60C (-4 to 140F) 10 to 80%, relative humidity, non-condensing 5 to 90% non-condensing noTES For regulatory, warranty, and safety information, see the CD that came with your router or go to Linksys.com/support Specifications are subject to change without notice Maximum performance derived from IEEE Standard 802 11 specifications Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions 1616 16 Linksys EA-Series Specifications Linksys EA3500 Linksys EA3500 Model Name Dual-Band N750 Router with Gigabit and USB Description EA3500 Model Number 6 total, 3 internal antennas per
# of Antennas each 2 4 GHz & 5 GHz radio band No Detachable (y/n) 10/100/1000 Mbps (Gigabit Ethernet) Switch Port Speed Internet, Ethernet (1-4), USB, Power Ports Reset, Wi-Fi Protected Setup Buttons Power, Internet, Ethernet (1-4) LEDs 802 11b: CCK, QPSK, BPSK Modulation 802 11g: OFDM 802 11a: OFDM 802 11n: BPSK, QPSK, 16-QAM, 64-QAM 2 4 GHz Receive Sensitivity 802 11b: -87 dBm @ 11 Mbps (Typical) 802 11g: -77 dBm @ 54 Mbps (Typical) 802 11n (20 MHz): -72 dBm @ MCS15 (Typical) 802 11n (40 MHz): -69 dBm @ MCS15 (Typical) 5 GHz 802 11a: -74 dBm @ 54 Mbps (Typical) 802 11n 20 MHz: -67 dBm @ MCS23 (Typical) 802 11n 40 MHz: -64 dBm @ MCS23 (Typical) 2 4 GHz (Dipole Antennas) Antenna Gain Antenna 1 2 70 dBi Antenna 2 3 70 dBi Antenna 3 4 95 dBi 5 GHz (Dipole Antennas) Antenna 1 4 46 dBi Antenna 2 3 23 dBi Antenna 3 3 88 dBi Supported UPnP WEP, WPA, WPA2 Security features Security key bits Up to 128-bit encryption Storage File System Support FAT, and NTFS, and HFS+
Environmental Dimensions Unit Weight Power Certifications Operating Temp Storage Temp Operating Humidity Storage Humidity 6 69" x 0 98" x 7 48"
(170 x 25 x 190 mm) 11 5 oz (326 g) 12V, 2A FCC, IC, CE, Wi-Fi A/B/G/N, Windows 7 32 to 95F (0 to 35C)
-4 to 140F (-20 to 60C) 10 to 80% relative humidity, non-condensing 5 to 90% non-condensing noTES For regulatory, warranty, and safety information, see the CD that came with your router or go to Linksys.com/support Specifications are subject to change without notice Maximum performance derived from IEEE Standard 802 11 specifications Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions 17 17 Linksys EA-Series Linksys EA4500 Model Name Description Model Number Standards Radio Frequency Switch Port Speed Ports Buttons LEDs Number of Antennas Detachable (y/n) Modulations Receive Sensitivity Antenna Gain in dBi Linksys EA4500 Dual-Band N900 Router with Gigabit and USB EA4500 802 11n, 802 11a, 802 11g, 802 11b, 802 3, 802 3u, 802 3ab 2 4 and 5 GHz 10/100/1000 Mbps (Gigabit Ethernet) Power, USB, Internet, Ethernet (1-4) Reset, Wi-Fi Protected Setup Top panel: Power Back panel: Internet, Ethernet (1-4) 6 total, 3 internal antennas per each 2 4 GHz and 5 GHz radio band No 802 11b: CCK, QPSK, BPSK 802 11g: OFDM 802 11a: OFDM 802 11n: BPSK, QPSK, 16-QAM, 64-QAM 2 4 GHz 802 11b: -87 dBm @ 11 Mbps (Typical) 802 11g: -77 dBm @ 54 Mbps (Typical) 802 11n: 20 MHz: -70 dBm @ MCS23 (Typical) 802 11n: 40 MHz: -66 dBm @ MCS23 (Typical) 5 GHz 802 11a: -74 dBm @ 54 Mbps (Typical) 802 11n: 20 MHz: -67 dBm @ MCS23 (Typical) 802 11n: 40 MHz: -64 dBm @ MCS23 (Typical) 2 4 GHz (3 internal PIFA antennas) PIFA 1 3 31 dBi (Right) PIFA 2 3 45 dBi (Front) PIFA 3 1 96 dBi (Left) 5 GHz (3 internal PIFA antennas) PIFA 1 3 71 dBi (Right) PIFA 2 3 60 dBi (Front) PIFA 3 4 27 dBi (Left) Specifications Supported File Systems for Storage Device UPnP Security Features Security Key Bits FAT32, NTFS, and HFS+
Supported WEP, WPA, WPA2 Up to 128-bit encryption Environmental Dimensions Unit Weight Power Certifications Operating Temp Storage Temp Operating Humidity Storage Humidity 8 86" x 0 98" x 6 30"
(225 x 25 x 160 mm) 12 7 oz (360 g) 12V, 2A FCC, IC, CE, Wi-Fi a/b/g/n, Windows 7, DLNA 32 to 104F (0 to 40C)
-4 to 140F (-20 to 60C) 10 to 80% relative humidity, non-condensing 5 to 90% non-condensing noTES For regulatory, warranty, and safety information, see the CD that came with your router or go to Linksys.com/support Specifications are subject to change without notice Maximum performance derived from IEEE Standard 802 11 specifications Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions 18 18 Visit linksys.com/support for award-winning technical support Cisco, the Cisco logo, and Linksys are trademarks or registered trademarks of Cisco and/or its affiliates in the United States and other countries A listing of Ciscos trademarks can be found at www cisco com/go/trademarks All other trademarks mentioned in this document are the property of their respective owners 2012 Cisco and/or its affiliates All rights reserved 3425-01602 Linksys Dual-Band N Routers and Bridges Regulatory Information Linksys Dual-Band N Routers and Bridges Table of Contents Wireless Regulatory Information 1 FCC Statement 1 FCC Radiation Exposure Statement 1 Safety Notices 1 Industry Canada Statement 1 Avis dIndustrie Canada 1 Wireless Disclaimer 2 Avis de non-responsabilit concernant les appareils sans fil 2 Declaration of Conformity with Regard to EU Directive 1999/5/EC (R&TTE Directive) 2 Wireless Equipment (Wireless-N/G/A/B Products) 3 National Restrictions 3 Product Usage Restrictions 4 Technical Documents on http://home cisco com/wireless 4 WEEE Information 5 User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) 5 i Linksys Dual-Band N Routers and Bridges Wireless Regulatory Information Safety Notices FCC Statement This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna Increase the separation between the equipment or devices Connect the equipment to an outlet other than the receivers Consult a dealer or an experienced radio/TV technician for assistance FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment IEEE 802 11b or 802 11g operation of this product in the USA is firmware-limited to channels 1 through 11 The device for the band 5150-5250 MHz is only for indoor usage to reduce the potential for harmful interference to co-channel mobile satellite systems FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter WARNING: Do not use this product near water, for example, in a wet basement or near a swimming pool WARNING: Avoid using this product during an electrical storm There may be a remote risk of electric shock from lightning WARNING: This product contains lead, known to the State of California to cause cancer, and birth defects or other reproductive harm Wash hands after handling Industry Canada Statement This Class B digital apparatus complies with Canadian ICES-003 and RSS210 Operation is subject to the following two conditions:
1 This device may not cause interference and 2 This device must accept any interference, including interference that may cause undesired operation of the device Industry Canada Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter Restrictions in the 5 GHz Band The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-
channel mobile satellite systems Because high power radars are allocated as primary users
(meaning they have priority) in 5250-5350 MHz and 5650-5850 MHz, these radars could cause interference and/or damage to licensed exempt LAN devices Additional requirements for the band 5600-5650 MHz:
Until further notice, devices subject to this Section shall not be capable of transmitting in the band 5600-
5650 MHz, so that Environment Canada weather radars operating in this band are protected 1 Linksys Dual-Band N Routers and Bridges Avis dIndustrie Canada Cet appareil numrique de la classe B est conforme aux normes NMB-003 et RSS210 du Canada Lutilisation de ce dispositif est autorise seulement aux conditions suivantes :
1 2 il ne doit pas produire de brouillage et il doit accepter tout brouillage radiolectrique reu, mme si ce brouillage est susceptible de compromettre le fonctionnement du dispositif Avis dIndustrie Canada concernant lexposition aux radiofrquences Ce matriel est conforme aux limites tablies par IC en matire dexposition aux radiofrquences dans un environnement non contrl Ce matriel doit tre install et utilis une distance dau moins 20 cm entre lantenne et le corps de lutilisateur Lmetteur ne doit pas tre plac prs dune autre antenne ou dun autre metteur, ou fonctionner avec une autre antenne ou un autre metteur Restrictions dans la bande 5 GHz Lappareil pour la bande de 5150 5250 MHz est conu pour usage lintrieur seulement afin de rduire le potentiel dinterfrences pour les systmes mobiles par satellite qui utilisent le mme canal Du fait que les radars haute puissance ont la priorit dans les bandes 5250-5350 MHz et 5650-5850 MHz, ils pourraient causer des interfrences ou endommager les priphriques rseau sans fil Autres restrictions pour la bande 5 600-5 650 MHz : sauf avis contraire, les priphriques concerns par cette section ne doivent pas tre capables de transmettre dans la bande 5 600-5 650 MHz afin de protger les radars dEnvironnement Canada qui lutilisent Wireless Disclaimer The maximum performance for wireless is derived from IEEE Standard 802 11 specifications Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions Avis de non-responsabilit concernant les appareils sans fil Les performances maximales pour les rseaux sans fil sont tires des spcifications de la norme IEEE 802 11 Les performances relles peuvent varier, notamment en fonction de la capacit du rseau sans fil, du dbit de la transmission de donnes, de la porte et de la couverture Les performances dpendent de facteurs, conditions et variables multiples, en particulier de la distance par rapport au point daccs, du volume du trafic rseau, des matriaux utiliss dans le btiment et du type de construction, du systme dexploitation et de la combinaison de produits sans fil utiliss, des interfrences et de toute autre condition dfavorable Declaration of Conformity with Regard to EU Directive 1999/5/EC (R&TTE Directive) Compliance Information for Cisco Consumer Products (2,4 and 5 GHz) Relevant to the European Union and Other Countries Following the EU Directive 1999/5/EC (R&TTE Directive)
[Bulgarian]
1999/5/
esky
[Czech]:
Dansk
[Danish]:
Deutsch
[German]:
Toto zazen je v souladu se zkladnmi poadavky odpovdajcmi ustanovenmi Smrnice 1999/5/EC ostatnmi a Dette udstyr er i overensstemmelse med de vsentlige krav og andre relevante bestemmelser i Direktiv 1999/5/EF Dieses Gert entspricht den grundlegenden Anforderungen weiteren entsprechenden Vorgaben der Richtlinie 1999/5/EU und den Eesti
[Estonian]:
See seade vastab direktiivi 1999/5/E olulistele nuetele ja teistele asjakohastele stetele English:
Espaol
[Spanish]:
[Greek]:
Franais
[French]:
This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC requisitos Este equipo cumple con esenciales asi como con otras disposiciones de la Directiva 1999/5/CE los 1999/5/EC Cet appareil est conforme aux exigences essentielles et aux autres dispositions pertinentes de la Directive 1999/5/EC 2 Linksys Dual-Band N Routers and Bridges slenska
[Icelandic]:
etta tki er samkvmt grunnkrfum og rum vieigandi kvum Tilskipunar 1999/5/EC Svenska
[Swedish]:
Denna utrustning r i verensstmmelse med de vsentliga kraven och andra relevanta bestmmelser i Direktiv 1999/5/EC Italiano
[Italian]:
Latviski
[Latvian]:
Questo apparato conforme ai requisiti essenziali e agli altri principi sanciti dalla Direttiva 1999/5/CE iekrta atbilst Direktvas 1999/5/
EK btiskajm prasbm un citiem ar to saisttajiem noteikumiem Lietuvi
[Lithuanian]:
is renginys tenkina 1999/5/EB Direktyvos esminius reikalavimus ir kitas ios direktyvos nuostatas Nederlands
[Dutch]:
Dit apparaat voldoet aan de essentiele eisen en andere van toepassing zijnde bepalingen van de Richtlijn 1999/5/EC Malti
[Maltese]:
Dan l-apparat huwa konformi mal-tiiet essenzjali u l-provedimenti l-ora rilevanti tad-Direttiva 1999/5/EC Magyar
[Hungarian]:
a Ez kszlk teljesti kvetelmnyeket s ms irnyelvben meghatrozott rendelkezseket az alapvet 1999/5/EK vonatkoz Norsk
[Norwegian]:
Dette utstyret er samsvar med de grunnleggende krav og andre relevante bestemmelser i EU-direktiv 1999/5/EF i Polski
[Polish]:
jest Urzdzenie oglnymi wymaganiami oraz szczeglnymi warunkami okrelonymi Dyrektyw UE: 1999/5/EC zgodne z Portugus
[Portuguese]:
Este equipamento est em conformidade com os requisitos essenciais e outras provises relevantes da Directiva 1999/5/EC Romn
[Romanian]
Acest echipament este in conformitate cu cerintele esentiale si cu alte prevederi relevante ale Directivei 1999/5/EC Slovensko
[Slovenian]:
Ta naprava je skladna z bistvenimi zahtevami in ostalimi relevantnimi pogoji Direktive 1999/5/EC Slovensky
[Slovak]:
Suomi
[Finnish]:
Toto zariadenie je v zhode so zkladnmi poiadavkami prslunmi nariadeniami direktv: 1999/5/EC inmi a laite tytt direktiivin 1999/5/EY Tm olennaiset vaatimukset ja on siin asetettujen muiden koskevien mrysten mukainen laitetta For all products, the Declaration of Conformity (DofC) is available through one or more of these options:
A pdf file is included on the products CD A print copy is included with the product A pdf file is available on the products webpage Visit http://home.cisco.com/wireless and select your country or region Then select your product If you need any other technical documentation, see the Technical Documents on http://home cisco com/wireless section, as shown later in this document Wireless Equipment
(Wireless-N/G/A/B Products) The following standards were applied during the assessment of the product against the requirements of the Directive 1999/5/EC:
Radio: EN 300 328 and/or EN 301 893 as applicable EMC: EN 301 489-1, EN 301 489-17 Safety: EN 60950-1 and either EN 50385 or EN 50371 For the Cisco Wireless-N, -G, -B, and/or -A products, the following CE mark and class 2 identifier are added to the equipment National Restrictions This product may be used in all EU countries (and other countries following the EU directive 1999/5/EC) without any limitation except for the countries mentioned below:
Ce produit peut tre utilis dans tous les pays de lUE (et dans tous les pays ayant transposs la directive 1999/5/CE) sans aucune limitation, except pour les pays mentionns cidessous:
Questo prodotto utilizzabile in tutti i paesi EU (e in tutti gli altri paesi che seguono le direttive EU 1999/5/EC) senza nessuna limitazione, eccetto per i paesi menzionati di seguito:
Das Produkt kann in allen EU Staaten ohne Einschrnkungen eingesetzt werden (sowie in anderen Staaten die der EU Direktive 1999/5/CE folgen) mit Aunahme der folgenden aufgefhrten Staaten:
In the EU and other European countries, the 2,4- and 5-GHz bands have been made available for the use of wireless local area networks (LANs) The Overview of Regulatory Requirements for Wireless LANs table provides an overview of the regulatory requirements applicable for the 2,4- and 5-GHz bands Later in this document you will find an overview of countries in which additional restrictions or requirements or both are applicable The requirements for any country may evolve Cisco Consumer Products recommends that you check with the local authorities for the latest status of their national regulations for both the 2,4-
and 5-GHz wireless LANs 3 Linksys Dual-Band N Routers and Bridges Overview of Regulatory Requirements for Wireless LANs Max Power Level (EIRP) Indoor &
Outdoor Indoor ONLY Frequency Band (MHz) 2400-2483,5 5150-5350 5470-5725 Dual band versions which can also operate in the 5 GHz band are limited to only operate within the band 5150-5250 MHz and as such are restricted to indoor use only (except Denmark)
(mW) 100 200 1000 X X X The following countries have restrictions and/or requirements in addition to those given in the Overview of Regulatory Requirements for Wireless LANs table:
Denmark In Denmark, the band 5150 - 5350 MHz is also allowed for outdoor usage I Danmark m frekvensbndet 5150 5350 ogs anvendes udendrs. France For 2,4 GHz, the product should not be used outdoors in the band 2454 - 2483,5 MHz There are no restrictions when used in other parts of the 2,4 GHz band OR when used indoors Check http://www.arcep.fr/ for more details Pour la bande 2,4 GHz, l quipement ne doit pas tre utilis en extrieur dans la bande 2454 2483,5 MHz. Il ny a aucune restriction pour son utilisation dans dautres parties de la bande des 2,4 GHz ainsi que pour une utilisation en intrieur. Consultez http://www.arcep.fr/ pour de plus amples dtails. Italy This product meets the National Radio Interface and the requirements specified in the National Frequency Allocation Table for Italy Unless this 2,4-GHz wireless LAN product is operating within the boundaries of the owners property, its use requires a general authorization Please check http://www.comunicazioni.it/ for more details Questo prodotto conforme alle specifiche di Interfaccia Radio Nazionali e rispetta il Piano Nazionale di ripartizione delle frequenze installato allinterno lutilizzo di prodotti Wireless LAN a 2,4 del proprio fondo, GHz Autorizzazione Generale. Consultare http://www.comunicazioni.it/ per maggiori dettagli. Latvia The outdoor usage of the 2,4 GHz band requires an authorization from the Electronic Communications Office Please check http://www.esd.lv for more details 2,4 GHz frekveu joslas izmantoanai rpus telpm nepiecieama atauja no Elektronisko sakaru direkcijas. Vairk informcijas:
http://www.esd.lv. Notes:
1 Although Norway, Switzerland and Liechtenstein are not EU member states, the EU Directive 1999/5/EC has also been implemented in those countries in Italia. Se non viene richiede una 2 The regulatory limits for maximum output power are specified in EIRP The EIRP level of a device can be calculated by adding the gain of the antenna used
(specified in dBi) to the output power available at the connector (specified in dBm) Product Usage Restrictions This product is designed for indoor usage only Outdoor usage is not recommended, unless otherwise noted 2,4 GHz Restrictions This product is designed for use with the standard, integral or dedicated (external) antenna(s) that is/are shipped together with the equipment Third-Party Software or Firmware The use of software or firmware not supported/provided by Cisco Consumer Products may result that the equipment is no longer compliant with the regulatory requirements Technical Documents on www myciscohome com Follow these steps to access technical documents:
1 Enter www.myciscohome.com in your web browser 2 Click Change your location, and select the country or region in which you live 3 Click the Products tab 4 Select the appropriate product category 5 Select the product sub-category, if necessary 6 Select the product 7 Select the type of documentation you want from the More Information section The document will open in PDF format if you have Adobe Reader installed on your computer If you have questions NOTE:
regarding compliance of this product or you cannot find visit http://home.cisco.com/wireless you need, information the 4 Linksys Dual-Band N Routers and Bridges WEEE Information User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment
(WEEE) This document contains important information for users with regards to the proper disposal and recycling of Cisco home networking products Consumers are required to comply with this notice for all electronic products bearing the following symbol:
English - Environmental Information for Customers in the European Union European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste The symbol indicates that this product should be disposed of separately from regular household waste streams It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities Correct disposal and recycling will help prevent potential negative consequences to the environment and human health For more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop where you purchased the product
(Bulgarian)
-
2002/96/EC ,
/ ,
,
-
,
, etina (Czech) - Informace o ochran ivotnho prosted pro zkaznky v zemch Evropsk unie Evropsk smrnice 2002/96/ES zakazuje, aby zazen oznaen tmto symbolem na produktu anebo na obalu bylo likvidovno s netdnm komunlnm odpadem Tento symbol udv, e dan produkt mus bt likvidovn oddlen od bnho komunlnho odpadu Odpovdte za likvidaci tohoto produktu a dalch elektrickch a elektronickch zazen prostednictvm urench sbrnch mst stanovench vldou nebo mstnmi ady Sprvn likvidace a recyklace pomh pedchzet potencilnm negativnm dopadm na ivotn prosted a lidsk zdrav Podrobnj informace o likvidaci starho vybaven si laskav vydejte od mstnch ad, podniku zabvajcho se likvidac komunlnch odpad nebo obchodu, kde jste produkt zakoupili Dansk (Danish) - Miljinformation for kunder i EU EU-direktiv 2002/96/EF krver, at udstyr der brer dette symbol p produktet og/eller emballagen ikke m bortskaffes som usorteret kommunalt affald Symbolet betyder, at dette produkt skal bortskaffes adskilt fra det almindelige husholdningsaffald Det er dit ansvar at bortskaffe dette og andet elektrisk og elektronisk udstyr via bestemte indsamlingssteder udpeget af staten eller de lokale myndigheder Korrekt bortskaffelse og genvinding vil hjlpe med til at undg mulige skader for miljet og menneskers sundhed Kontakt venligst de lokale myndigheder, renovationstjenesten eller den butik, hvor du har kbt produktet, angende mere detaljeret information om bortskaffelse af dit gamle udstyr Deutsch (German) - Umweltinformation fr Kunden innerhalb der Europischen Union Die Europische Richtlinie 2002/96/EC verlangt, dass technische Ausrstung, die direkt am Gert und/oder an der Verpackung mit diesem Symbol versehen ist
, nicht zusammen mit unsortiertem Gemeindeabfall entsorgt werden darf Das Symbol weist darauf hin, dass das Produkt von regulrem Haushaltmll getrennt entsorgt werden sollte Es liegt in Ihrer Verantwortung, dieses Gert und andere elektrische und elektronische Gerte ber die dafr zustndigen und von der Regierung oder rtlichen Behrden dazu bestimmten Sammelstellen zu entsorgen Ordnungsgemes Entsorgen und Recyceln trgt dazu bei, potentielle negative Folgen fr Umwelt und die menschliche Gesundheit zu vermeiden Wenn Sie weitere Informationen zur Entsorgung Ihrer Altgerte bentigen, wenden Sie sich bitte an die rtlichen Behrden oder stdtischen Entsorgungsdienste oder an den Hndler, bei dem Sie das Produkt erworben haben 5 Linksys Dual-Band N Routers and Bridges informatsioon Eesti (Estonian) - Keskkonnaalane Euroopa Liidus asuvatele klientidele Euroopa Liidu direktiivi 2002/96/E nuete kohaselt on seadmeid, millel on tootel vi pakendil kesolev smbol
, keelatud krvaldada koos sorteerimata olmejtmetega See smbol nitab, et toode tuleks krvaldada eraldi tavalistest olmejtmevoogudest Olete kohustatud krvaldama kesoleva ja ka muud elektri- ja elektroonikaseadmed riigi vi kohalike ametiasutuste poolt ette nhtud kogumispunktide kaudu Seadmete korrektne krvaldamine ja ringlussevtt aitab vltida vimalikke negatiivseid tagajrgi keskkonnale ning inimeste tervisele Vanade seadmete krvaldamise kohta tpsema informatsiooni saamiseks vtke palun hendust kohalike ametiasutustega, jtmekitlusfirmaga vi kauplusega, kust te toote ostsite Espaol (Spanish) - Informacin medioambiental para clientes de la Unin Europea La Directiva 2002/96/CE de la UE exige que los equipos que lleven este smbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados El smbolo indica que el producto en cuestin debe separarse de los residuos domsticos convencionales con vistas a su eliminacin Es responsabilidad suya desechar este y cualesquiera otros aparatos elctricos y electrnicos a travs de los puntos de recogida que ponen a su disposicin el gobierno y las autoridades locales Al desechar y reciclar correctamente estos aparatos estar contribuyendo a evitar posibles consecuencias negativas para el medio ambiente y la salud de las personas Si desea obtener informacin ms detallada sobre la eliminacin segura de su aparato usado, consulte a las autoridades locales, al servicio de recogida y eliminacin de residuos de su zona o pregunte en la tienda donde adquiri el producto
(Greek)
-
2002/96/EC,
/
,
,
, Franais (French) - Informations environnementales pour les clients de lUnion europenne La directive europenne 2002/96/CE exige que lquipement sur lequel est appos ce symbole sur le produit et/ou son emballage ne soit pas jet avec les autres ordures mnagres Ce symbole indique que le produit doit tre limin dans un circuit distinct de celui pour les dchets des mnages Il est de votre responsabilit de jeter ce matriel ainsi que tout autre matriel lectrique ou lectronique par les moyens de collecte indiqus par le gouvernement et les pouvoirs publics des collectivits territoriales Llimination et le recyclage en bonne et due forme ont pour but de lutter contre limpact nfaste potentiel de ce type de produits sur lenvironnement et la sant publique Pour plus dinformations sur le mode dlimination de votre ancien quipement, veuillez prendre contact avec les pouvoirs publics locaux, le service de traitement des dchets, ou lendroit o vous avez achet le produit Italiano (Italian) - Informazioni relative allambiente per i clienti residenti nellUnione Europea La direttiva europea 2002/96/EC richiede che le apparecchiature contrassegnate con questo simbolo sul prodotto e/o sullimballaggio non siano smaltite insieme ai rifiuti urbani non differenziati Il simbolo indica che questo prodotto non deve essere smaltito insieme ai normali rifiuti domestici responsabilit del proprietario smaltire sia questi prodotti sia le altre apparecchiature elettriche ed elettroniche mediante le specifiche strutture di raccolta indicate dal governo o dagli enti pubblici locali Il corretto smaltimento ed il riciclaggio aiuteranno a prevenire conseguenze potenzialmente negative per lambiente e per la salute dellessere umano Per ricevere informazioni pi dettagliate circa lo smaltimento delle vecchie apparecchiature in Vostro possesso, Vi invitiamo a contattare gli enti pubblici di competenza, il servizio di smaltimento rifiuti o il negozio nel quale avete acquistato il prodotto Latvieu valoda (Latvian) - Ekoloiska informcija klientiem Eiropas Savienbas jurisdikcij Direktv 2002/96/EK ir prasba, ka aprkojumu, kam pievienota zme uz paa izstrdjuma vai uz t iesaiojuma, nedrkst izmest neirot veid kop ar komunlajiem atkritumiem
(tiem, ko rada vietji iedzvotji un uzmumi) zme nozm to, ka ierce ir jizmet atkritumos t, lai t nenonktu kop ar parastiem mjsaimniecbas atkritumiem Jsu pienkums ir o un citas elektriskas un elektroniskas ierces izmest atkritumos, izmantojot paus atkritumu savkanas veidus un ldzekus, ko nodroina valsts un pavaldbu iestdes Ja izmeana atkritumos un prstrde tiek veikta pareizi, tad mazins iespjamais kaitjums dabai un cilvku veselbai Skkas zias par novecojua aprkojuma izmeanu atkritumos js varat saemt vietj pavaldb, atkritumu savkanas dienest, k ar veikal, kur iegdjties o izstrdjumu 6 Linksys Dual-Band N Routers and Bridges Lietuvkai (Lithuanian) - Aplinkosaugos informacija, skirta Europos Sjungos vartotojams Europos direktyva 2002/96/EC numato, kad rangos, kuri ir kurios pakuot yra paymta iuo simboliu (veskite simbol), negalima alinti kartu su neriuotomis komunalinmis atliekomis is simbolis rodo, kad gamin reikia alinti atskirai nuo bendro buitini atliek srauto Js privalote utikrinti, kad i ir kita elektros ar elektronin ranga bt alinama per tam tikras nacionalins ar vietins valdios nustatytas atliek rinkimo sistemas Tinkamai alinant ir perdirbant atliekas, bus ivengta galimos alos aplinkai ir moni sveikatai Daugiau informacijos apie js senos rangos alinim gali pateikti vietins valdios institucijos, atliek alinimo tarnybos arba parduotuvs, kuriose sigijote t gamin Informazzjoni Ambjentali gal Malti (Maltese) -
Klijenti fl-Unjoni Ewropea Id-Direttiva Ewropea 2002/96/KE titlob li t-tagmir li jkun fih is-simbolu fuq il-prodott u/jew fuq l-ippakkjar ma jistax jintrema ma skart muniipali li ma iex isseparat Is-simbolu jindika li dan il-prodott gandu jintrema separatament minn ma l-iskart domestiku regolari Hija responsabbilt tiegek li tarmi dan it-tagmir u kull tagmir ieor ta l-elettriku u elettroniku permezz ta failitajiet ta bir appuntati apposta mill-gvern jew mill-awtoritajiet lokali Ir-rimi bmod korrett u r-riikla jgin jipprevjeni konsegwenzi negattivi potenzjali gall-ambjent u gas-saa tal-bniedem Gal aktar informazzjoni dettaljata dwar ir-rimi tat-tagmir antik tiegek, jekk jogbok ikkuntattja lill-awtoritajiet lokali tiegek, is-servizzi gar-rimi ta l-iskart, jew il-anut minn fejn xtrajt il-prodott Magyar (Hungarian) - Krnyezetvdelmi informci az eurpai unis vsrlk szmra A 2002/96/EC szm eurpai unis irnyelv megkvnja, hogy azokat a termkeket, amelyeken, s/vagy amelyek csomagolsn az albbi cmke megjelenik, tilos a tbbi szelektlatlan lakossgi hulladkkal egytt kidobni A cmke azt jelli, hogy az adott termk kidobsakor a szokvnyos hztartsi hulladkelszlltsi rendszerektl elklntett eljrst kell alkalmazni Az n felelssge, hogy ezt, s ms elektromos s elektronikus berendezseit a kormnyzati vagy a helyi hatsgok ltal kijellt gyjtredszereken keresztl szmolja fel A megfelel hulladkfeldolgozs segt a krnyezetre s az emberi egszsgre potencilisan rtalmas negatv hatsok megelzsben Ha elavult berendezseinek felszmolshoz tovbbi rszletes informcira van szksge, krjk, lpjen kapcsolatba a helyi hatsgokkal, a hulladkfeldolgozsi szolglattal, vagy azzal zlettel, ahol a termket vsrolta Nederlands (Dutch) - Milieu-informatie voor klanten in de Europese Unie De Europese Richtlijn 2002/96/EC schrijft voor dat apparatuur die is voorzien van dit symbool op het product of de verpakking, niet mag worden ingezameld met niet-gescheiden huishoudelijk afval Dit symbool geeft aan dat het product apart moet worden ingezameld U bent zelf verantwoordelijk voor de vernietiging van deze en andere elektrische en elektronische apparatuur via de daarvoor door de landelijke of plaatselijke overheid aangewezen inzamelingskanalen De juiste vernietiging en recycling van deze apparatuur voorkomt mogelijke negatieve gevolgen voor het milieu en de gezondheid Voor meer informatie over het vernietigen van uw oude apparatuur neemt u contact op met de plaatselijke autoriteiten of afvalverwerkingsdienst, of met de winkel waar u het product hebt aangeschaft Norsk (Norwegian) - Miljinformasjon for kunder i EU EU-direktiv 2002/96/EF krever at utstyr med flgende symbol avbildet p produktet og/eller pakningen, ikke m kastes sammen med usortert avfall Symbolet indikerer at dette produktet skal hndteres atskilt fra ordinr avfallsinnsamling for husholdningsavfall Det er ditt ansvar kvitte deg med dette produktet og annet elektrisk og elektronisk avfall via egne innsamlingsordninger slik myndighetene eller kommunene bestemmer Korrekt avfallshndtering og gjenvinning vil vre med p forhindre mulige negative konsekvenser for milj og helse For nrmere informasjon om hndtering av det kasserte utstyret ditt, kan du ta kontakt med kommunen, en innsamlingsstasjon for avfall eller butikken der du kjpte produktet znajdujcym si na produkcie Polski (Polish) - Informacja dla klientw w Unii Europejskiej o przepisach dotyczcych ochrony rodowiska Dyrektywa Europejska 2002/96/EC wymaga, aby sprzt oznaczony symbolem i/
lub jego opakowaniu nie by wyrzucany razem z innymi niesortowanymi odpadami komunalnymi Symbol ten wskazuje, e produkt nie powinien by usuwany razem ze zwykymi odpadami z gospodarstw domowych Na Pastwu spoczywa obowizek wyrzucania tego i innych urzdze elektrycznych oraz elektronicznych w punktach odbioru wyznaczonych przez wadze krajowe lub lokalne Pozbywanie si sprztu we waciwy sposb jego recykling pomog zapobiec potencjalnie negatywnym konsekwencjom dla rodowiska i zdrowia ludzkiego W celu uzyskania szczegowych informacji o usuwaniu starego sprztu, prosimy zwrci si do lokalnych wadz, sub oczyszczania miasta lub sklepu, w ktrym produkt zosta nabyty i 7 Linksys Dual-Band N Routers and Bridges Portugus (Portuguese) - Informao ambiental para clientes da Unio Europeia A Directiva Europeia 2002/96/CE exige que o equipamento que exibe este smbolo no produto e/ou na sua embalagem no seja eliminado junto com os resduos municipais no separados O smbolo indica que este produto deve ser eliminado separadamente dos resduos domsticos regulares da sua responsabilidade eliminar este e qualquer outro equipamento elctrico e electrnico atravs das instalaes de recolha designadas pelas autoridades governamentais ou locais A eliminao e reciclagem correctas ajudaro a prevenir as consequncias negativas para o ambiente e para a sade humana Para obter informaes mais detalhadas sobre a forma de eliminar o seu equipamento antigo, contacte as autoridades locais, os servios de eliminao de resduos ou o estabelecimento comercial onde adquiriu o produto Romn (Romanian) - Informaii de mediu pentru clienii din Uniunea European Directiva european 2002/96/CE impune ca echipamentele care prezint acest simbol pe produs i/sau pe ambalajul acestuia s nu fie casate mpreun cu gunoiul menajer municipal Simbolul indic faptul c acest produs trebuie s fie casat separat de gunoiul menajer obinuit Este responsabilitatea dvs s casai acest produs i alte echipamente electrice i electronice prin intermediul unitilor de colectare special desemnate de guvern sau de autoritile locale Casarea i reciclarea corecte vor ajuta la prevenirea potenialelor consecine negative asupra sntii mediului i a oamenilor Pentru mai multe informaii detaliate cu privire la casarea acestui echipament vechi, contactai autoritile locale, serviciul de salubrizare sau magazinul de la care ai achiziionat produsul Slovenina (Slovak) - Informcie o ochrane ivotnho prostredia pre zkaznkov v Eurpskej nii Poda eurpskej smernice 2002/96/ES zariadenie s tmto symbolom na produkte a/alebo jeho balen nesmie by likvidovan spolu s netriedenm komunlnym odpadom Symbol znamen, e produkt by sa mal likvidova oddelene od benho odpadu z domcnost Je vaou povinnosou likvidova toto i ostatn elektrick a elektronick zariadenia prostrednctvom pecializovanch zbernch zariaden urench vldou alebo miestnymi orgnmi Sprvna likvidcia a recyklcia pome zabrni prpadnm negatvnym dopadom na ivotn prostredie a zdravie ud Ak mte zujem o podrobnejie informcie o likvidcii starho zariadenia, obrte sa, prosm, na miestne orgny, organizcie zaoberajce sa likvidciou odpadov alebo obchod, v ktorom ste si produkt zakpili informacije za Slovenina (Slovene) - Okoljske stranke v Evropski uniji Evropska direktiva 2002/96/ES prepoveduje odlaganje opreme s tem simbolom na izdelku in/ali na embalai z nesortiranimi komunalnimi odpadki Ta simbol opozarja, da je treba izdelek zavrei loeno od preostalih gospodinjskih odpadkov Vaa odgovornost je, da to in preostalo elektrino in elektronsko opremo oddate na posebna zbiralia, ki jih doloijo dravne ustanove ali in recikliranjem boste prepreili morebitne kodljive vplive na okolje in zdravje ljudi e elite izvedeti ve o odlaganju stare opreme, se obrnite na lokalne oblasti, odlagalie odpadkov ali trgovino, kjer ste izdelek kupili lokalne oblasti S pravilnim odlaganjem Suomi (Finnish) - Ymprist koskevia tietoja EU-
alueen asiakkaille EU-direktiivi 2002/96/EY edellytt, ett jos laitteistossa on tm symboli itse tuotteessa ja/tai sen pakkauksessa, laitteistoa ei saa hvitt lajittelemattoman yhdyskuntajtteen mukana Symboli merkitsee sit, ett tm tuote on hvitettv erilln tavallisesta kotitalousjtteest Sinun vastuullasi on hvitt tm elektroniikkatuote ja muut vastaavat elektroniikkatuotteet tuotteet viranomaisten mrmn viemll keryspisteeseen Laitteiston oikea hvittminen est mahdolliset kielteiset vaikutukset ympristn ja ihmisten terveyteen Listietoja vanhan laitteiston oikeasta hvitystavasta saa paikallisilta viranomaisilta, jtteenhvityspalvelusta tai siit myymlst, josta ostit tuotteen tuote tai Svenska (Swedish) - Miljinformation fr kunder i Europeiska unionen Det europeiska direktivet 2002/96/EC krver att utrustning med denna symbol p produkten och/eller frpackningen inte fr kastas med osorterat kommunalt avfall Symbolen visar att denna produkt br kastas efter att den avskiljts frn vanligt hushllsavfall Det faller p ditt ansvar att kasta denna och annan elektrisk och elektronisk utrustning p faststllda insamlingsplatser utsedda av regeringen eller lokala myndigheter Korrekt kassering och tervinning skyddar mot eventuella negativa konsekvenser fr miljn och personhlsa Fr mer detaljerad information om kassering av din gamla utrustning kontaktar du dina lokala myndigheter, avfallshanteringen eller butiken dr du kpte produkten WEB: For additional information, please visit http://home.cisco.com/wireless 3425-01439 110420NC-MS 8 www linksys com/support Cisco, the Cisco Logo, and Linksys are trademarks or registered trademarks of Cisco and/or its affiliates in the U S and other countries A listing of Ciscos trademarks can be found at www.cisco.com/go/trademarks Third-party trademarks mentioned are the property of their respective owners The use of the word partner does not imply a partnership relationship between Cisco and any other company 2011 Cisco and/or its affiliates All rights reserved
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2012-02-08 | 5180 ~ 5240 | NII - Unlicensed National Information Infrastructure TX | Original Equipment |
2 | 5745 ~ 5825 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2012-02-08
|
||||
1 2 | Applicant's complete, legal business name |
LINKSYS LLC
|
||||
1 2 | FCC Registration Number (FRN) |
0009100470
|
||||
1 2 | Physical Address |
121 Theory Drive
|
||||
1 2 |
Irvine, CA
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
c******@curtis-straus.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
Q87
|
||||
1 2 | Equipment Product Code |
EA2700
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
J****** H******
|
||||
1 2 | Title |
Regulatory Compliance Manager
|
||||
1 2 | Telephone Number |
949-2********
|
||||
1 2 | Fax Number |
949-2********
|
||||
1 2 |
j******@belkin.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
|
||||
1 2 | Name |
G**** C******
|
||||
1 2 | Physical Address |
No. 19, Hwa Ya 2nd Rd., Kwei Shan Hsiang
|
||||
1 2 |
Taoyuan Hsien, 333
|
|||||
1 2 |
Taiwan
|
|||||
1 2 | Telephone Number |
886-3******** Extension:
|
||||
1 2 | Fax Number |
886-3********
|
||||
1 2 |
g******@tw.bureauveritas.com
|
|||||
app s | Non Technical Contact | |||||
1 2 | Firm Name |
Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
|
||||
1 2 | Name |
W**** L********
|
||||
1 2 | Physical Address |
No. 19, Hwa Ya 2nd Rd., Kwei Shan Hsiang
|
||||
1 2 |
Taoyuan Hsien, 333
|
|||||
1 2 |
Taiwan
|
|||||
1 2 | Telephone Number |
886-3******** Extension:
|
||||
1 2 | Fax Number |
886-3********
|
||||
1 2 |
w******@tw.bureauveritas.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 03/30/2012 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
1 2 | DTS - Digital Transmission System | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Linksys EA2700 Dual-Band N600 Router with Gigabit | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power listed is the maximum combined conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. | ||||
1 2 | Power listed is the maximum combined conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
|
||||
1 2 | Name |
R******** C****
|
||||
1 2 | Telephone Number |
886-3******** Extension:
|
||||
1 2 | Fax Number |
886-3********
|
||||
1 2 |
r******@tw.bureauveritas.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | CC MO | 5180.00000000 | 5240.00000000 | 0.0380000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC MO | 2412 | 2462 | 0.547 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15C | CC MO | 5745 | 5825 | 0.471 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC