DIE LAYOUT DIE LAYOUT Die Line File:
Die Line File:
ID_MSKU_LINKSYS V2 ROUTER QIG ID_MSKU_LINKSYS V2 ROUTER QIG Artwork File:
Artwork File:
QSG_EA8300_8820-02532_RevB00_WiFi_Router_US 5 5
[127.000]
[127.000]
FTPED SEPERATELY Back Back 5 5
[127.000]
[127.000]
Front Front 10 10
[254.000]
[254.000]
6 Connect to the Wi-Fi name and password on the sticker. (You can change these details later.) Select the option to automatically connect to this network in the future. You will not have internet access until you complete router setup. AS YOU COMPLETE SETUP, RECORD YOUR ROUTER SETTINGS HERE 2.4 GHz Wi-Fi name (SSID) 2.4 GHz Wi-Fi password Place sticker here Wi-Fi Name/Wi-Fi Password 5 GHz1 + 5 GHz2 Wi-Fi name (SSID)*
Router password (default is admin)
*Smart Connect band steering on a tri-band router requires the two 5 GHz networks share a name (SSID) and password. 5 GHz1 + 5 GHz2 Wi-Fi password TIPS FOR SUCCESSFUL SETUP Check that any old routers are disconnected. Be sure to reconnect to the Wi-Fi of the new router. If you cannot connect to the internet after setting up your router, turn off your modem, router, and computer. Restart them in that order. For more tips, visit linksys.com/support/EA8300. IN A DO-IT-YOURSELF MOOD?
Connect your computer to your router with an ethernet cable. Visit http://LinksysSmartWiFi.com in a browser. o Be sure to click the link Manual configuration in the bottom left corner of the setup Welcome page. Default router password is admin. You also can type 192.168.1.1 in a browser to start setup. GET HELP Internet: linksys.com/support/EA8300 (For Regulatory, Warranty, and User Guide) Phone (US/Canada): 800-326-7114 (complimentary support during your warranty period) Twitter: @LinksysCares MAX-STREAM AC2200 MU-MIMO TRI-BAND ROUTER Model# EA8300 V1.1 Quick Start Guide 7 Enter http://LinksysSmartWiFi.com in a web browser. Follow the on-screen instructions to complete your router setup. You also can type 192.168.1.1 in a browser to start setup. LinksysSmartWiFi.com To complete setup, you will need a computer to visit http://LinksysSmartWiFi.com in a web browser. 2 Position the antennas straight up as shown, and plug in the router to a power source. 4 Connect your router to your modem or modem router. Plug one end of the included internet cable to the yellow internet port on your new router. If you have a modem, plug the other end into the ethernet (LAN) port on the modem. If you have a modem router, plug into any available port. Identify your equipment. 1 5 5
[127.000]
[127.000]
Modem Modem Router Router Make sure power switch is in the | (on) position. If you have a separate modem and standalone router, disconnect and remove your old router. or Modem - Router
(Gateway) 3 3 If you have a modem router, leave it connected. 5 Wait until the illuminated Linksys logo on the top of your router stops blinking and is solid white. 8820-02532 Rev. B00 Modem Router Modem - Router Modem Router
(Gateway)
(Gateway) Power Switch Power Switch Illuminated Linksys logo Back Back ICG PRODUCTION PR# 53741 FILE NAME QSG_EA8300_8820-02532_RevB00_WiFi_Router_US SKU# EA8300 P# 8820-02532 DESIGNER Shiho REVISION B00 DATE February 10, 2017 10:19 AM VERSION 04 415/16 415/16
[125.413]
[125.413]
Front Front 1415/16 1415/16
[379.413]
[379.413]
Power Switch Illuminated Linksys Logo Illuminated Linksys Logo FTPED SEPERATELY Front Front FTPED SEPERATELY Back Back 25 25
[635.000]
[635.000]
5 5
[127.000]
[127.000]
5 5
[127.000]
[127.000]
10 10
[253.999]
[253.999]
PRINT SPECS:
PRINT SPECS:
Color Plates:
Color Plates:
C Y M K Finish:
Finish:
Notes:
Notes:
GATE FOLD, PRINT BOTH SIDES ALL TEXT AND GRAPHIC ELEMENTS COLOR: CMYK R E V O C K C A B F R O N T C O V E R INSIDE PAGE Gate Fold REV REV B B 00 00 Business Unit:
Business Unit:
NET-Networking NET-Networking Program Manager:
Program Manager:
Packaging Engineer:
Packaging Engineer:
Matthew Duffy Matthew Duffy Retail Outside Dimension (Including Hang Tab) Retail Outside Dimension (Including Hang Tab) L x W x D (in):
L x W x D (in):
L x W x D (mm):
L x W x D (mm):
DIE/MATERIAL SPECS:
DIE/MATERIAL SPECS:
Material:
Material:
157g/m^2 Art Paper 157g/m^2 Art Paper Blank Size (in):
Blank Size (in):
Blank Size (mm):
Blank Size (mm):
35 x 41+11/16 35 x 41+11/16 889 x 1058.863 889 x 1058.863 This dieline works for following skus (if any):
This dieline works for following skus (if any):
EA6400, EA6700, EA6900, EA7300, EA6400, EA6700, EA6900, EA7300, EA7400, EA7500 EA7400, EA7500 Unit:
Unit:
IN/MM IN/MM PRINT SIDE PRINT SIDE horizontal horizontal Side Shown:
Side Shown:
Flute/Grain:
Flute/Grain:
Tolerance:+/- 1/32" - 0.8mm Tolerance:+/- 1/32" - 0.8mm Drawing Scale 1:1 Drawing Scale 1:1 RELEASE DATE: 08/17/2016 RELEASE DATE: 08/17/2016 DIELINE:
DIELINE:
Intermediate Intermediate THIS DOCUMENT & THE INFORMATION THIS DOCUMENT & THE INFORMATION IN IT ARE THE CONFIDENTIAL PROPERTY IN IT ARE THE CONFIDENTIAL PROPERTY OF BELKIN INTERNATIONAL AND MUST OF BELKIN INTERNATIONAL AND MUST NOT BE COPIED, REPRODUCED OR USED NOT BE COPIED, REPRODUCED OR USED IN ANY MANNER WITHOUT THE WRITTEN IN ANY MANNER WITHOUT THE WRITTEN CONSENT OF BELKIN CORPORATION. CONSENT OF BELKIN CORPORATION. IT MUST BE RETURNED UPON REQUEST IT MUST BE RETURNED UPON REQUEST DO NOT PRINT DO NOT PRINT DIE LINES, PRINTERS NOTES DIE LINES, PRINTERS NOTES DIE LAYOUT DIE LAYOUT Die Line File:
Die Line File:
LINKSYS - 5 X 5 - 4 PANEL QIG LINKSYS - 5 X 5 - 4 PANEL QIG Artwork File:
Artwork File:
INS_EA8300_8850-00476_RevB00_RegulatoryInsert REV REV 0 0 00 00 QIG - 105 GSM C2S ARTPAPER QIG - 105 GSM C2S ARTPAPER Belkin and WeMo Networking Products http://www.belkin.com/us/belkin-premium-support/
Please Note: Some of these offerings may not be offered in your country Telephone support may not be available where you live and may be subject to charge. FRONT FRONT FOR NEGLIGENCE, AND FOR ANY OTHER PECUNIARY OR OTHER LOSS WHATSOEVER), REGARDLESS OF THE THEORY OF LIABLITY (CONTRACT, TORT OR OTHERWISE) ARISING OUT OF OR IN ANY WAY RELATED TO THE USE OF OR INABILITY TO USE THE PRODUCT, EVEN IF BELKIN OR SUCH OTHER ENTITIES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT SHALL THE TOTAL AGGREGATE LIABILITY OF BELKIN, ITS AFFILIATES, ASSOCIATES, DEALERS, AGENTS OR SUPPLIERS TO YOU FOR ALL DAMAGES EXCEED THE PRICE YOU PAID FOR THE PRODUCT. THIS LIMITATION IS CUMULATIVE AND WILL NOT BE INCREASED BY THE EXISTENCE OF MORE THAN ONE INCIDENT OR CLAIM. THE FOREGOING LIMITATIONS WILL APPLY EVEN IF ANY WARRANTY OR REMEDY PROVIDED FAILS OF ITS ESSENTIAL PURPOSE. NOTHING IN THIS SECTION SHALL LIMIT THE LIABILITY OF BELKIN IN RELATION TO DEATH OR BODILY INJURIES. THE WARRANTIES AND REMEDIES SET OUT IN THIS AGREEMENT ARE EXCLUSIVE, AND, TO THE EXTENT PERMITTED BY LAW, IN LIEU OF ALL OTHERS ORAL OR WRITTEN, EXPRESS OR IMPLIED. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF IMPLIED WARRANTIES OR OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE FOREGOING LIMITATIONS MAY NOT APPLY TO YOU. If any term is held to be illegal or unenforceable, the legality or enforceability of the remaining terms shall not be affected or impaired. BELKIN TECHNICAL AND WARRANTY SUPPORT INFORMATION HOW DO I GET HELP?
If you have a question about your product or experience a problem with it, please go to http://www.belkin.com/support or http://support.linksys.com. You will find lots of online support tools and information to help you with your product. What should I do if my product is defective?
You always have the option to return the product to the original seller if you have a problem. You can make a claim based on this warranty or any consumer laws that apply to you. You can also make a claim under this warranty or local consumer laws by contacting Linksys or Belkin Technical Support. To find out how to contact us, click the Contact Us link on the home page of http://Linksys.com or http://www.belkin.com. If you are located outside the United States, you will need to choose your region/location first:
For Linksys.com:
http://www.linksys.com/us/change-region/
For Belkin.com:
http://www.belkin.com/us/ - Click the Change Region link at the bottom of the website and select your location If I believe my product is defective and covered by this warranty, what do I need to do?
You will need to contact Technical Support for your region at the links above. So that we can help you, you will need to give us some information when you contact us:
your product model, hardware revision and serial number;
the name of your Internet Service Provider (ISP); and proof that you purchased the product, with the date of the purchase shown and place where it was purchased. WE WILL ALWAYS NEED A DATED PROOF OF ORIGINAL PURCHASE TO PROCESS WARRANTY CLAIMS. Sometimes we will need you to send the product back to us so that we can fix or replace it. If we ask you to return your product to us by post, you will be given a Return Materials Authorization (RMA) number and well tell you where to send the product. You will need to make sure the product is properly packaged and shipped, and you will be responsible for the costs of returning your product to us. We need to identify your product when it reaches us, so youll need to include the RMA number AND a copy of your dated proof of original purchase (please keep the original) with the returned product. We also recommend that you send the package by registered and insured mail or by overnight courier to protect the package while it is in transit. What happens when I return my product?
Defective products covered by this warranty will be replaced without charge with the same product or an equivalent product of equal or greater value, or Belkin will provide you with a refund of the purchase price of the product, minus any rebates and discounts. The remedy offered will be determined by Belkin in its sole discretion. We can only ship replacement or repaired products to locations in the country where the original product was purchased. Belkin may need to delete all or part of your data to repair or replace your product. Belkin may also install software updates as part of warranty service. PLEASE MAKE SURE THAT YOU BACK UP ALL OF YOUR DATA ON THE PRODUCT BEFORE SENDING IT IN FOR REPAIR OR REPLACEMENT. BELKIN IS NOT RESPONSIBLE FOR ANY LOSS OF DATA OR SOFTWARE DURING WARRANTY SERVICE. Replacements not covered under warranty or your rights under consumer law may be refused by place of purchase, or may be subject to charge. Technical support This warranty is not a service or support contract. Details on our technical support offerings and policies (including any applicable fees) can be found at http://www.belkin.com/support or http://support.linksys.com. Belkin provides many different options to support you. Please click on or go to the appropriate website below for more details. Please make sure to change to your local country if necessary. Belkin and WeMo Products: http://www.belkin.com/support Linksys Products: http://support.linksys.com Along with the Limited Warranty, Belkin provides Complimentary Assisted Technical Support for the Warranty Period to get your hardware up and running. Complimentary Assisted Technical Support includes technical support (by phone) and live chat (through your computer). At this time, live chat is only available in certain countries. Please visit our websites (indicated above) in your local area for details. For additional support beyond the Complimentary Assisted Technical Support period or for assistance on advanced features beyond basic support, please contact our Technical Support team to learn more about how we can help you get the most out of your product. Please note that you may be assessed a fee to speak with our technician if you contact us outside the Complimentary Assisted Technical Support period. Additional information on some of our Premium Support Offerings can be found at:
Linksys Networking Products http://www.linksys.com/us/premium-support/
FRONT COVER Regulatory and Warranty Information NEXT-GEN AC Details and Disclosures MAX-STREAM AC2200 MU-MIMO TRI-BAND ROUTER Model# EA8300 8850-00476 Rev. B00 ICG PRODUCTION PR# 54502 FILE NAME INS_EA8300_8850-00476_RevB00_RegulatoryInsert SKU# EA8300 P# 8850-00476 DESIGNER Shiho REVISION B00 DATE July 20, 2017 5:28 PM VERSION 03 BACK BACK The device for the band 5150-5250 MHz is only for indoor usage to reduce the potential for harmful interference to co-channel mobile satellite systems. WARRANTY AND SUPPORT INFORMATION FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and devices. Connect the equipment to an outlet other than the receivers. Consult a dealer or an experienced radio/TV technician for assistance. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. 2.4GHz operation of this product in the USA is firmware-limited to channels 1 through 11. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 35 cm between the radiator and your body. This device and its antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Wireless Disclaimer The maximum performance for wireless is derived from IEEE Standard 802.11 specifications. Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage. Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions. Safety Notices English WARNING: Do not use this product near water, for example, in a wet basement or near a swimming pool. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. WARNING: The power adaptor is the equipments disconnection device. The power outlet must be located nearby the equipment and its access must be easy. Espaol ADVERTENCIA: No use este producto cerca del agua, por ejemplo en un sotano hmedo o cerca de una piscina. ADVERTENCIA: Evite usar este producto durante una tormenta elctrica. Puede existir el riesgo remoto de que se produzca una descarga elctrica producida por un rayo. ADVERTENCIA: El adaptador de alimentacin es el dispositivo de desconexin del equipo. La base de toma de corriente debe estar cerca del equipo y ser fcilmente accessible. Third-Party Software or Firmware The use of software or firmware not supported/provided by Linksys products may result that the equipment is no longer compliant with the regulatory requirements. IMPORTANT!
PLEASE RETAIN PROOF OF PURCHASE AND PRODUCT WARRANTY INFORMATION LIMITED WARRANTY
(UNITED STATES AND CANADA) This warranty is provided to you by Belkin International, Inc, or one of its subsidiaries or affiliates (Belkin) IMPORTANT NOTICE REGARDING YOUR CONSUMER RIGHTS The benefits we give in this manufacturers warranty are additional to any rights and remedies that you may have under local consumer protection laws. Nothing in this warranty limits or affects your legal rights. This manufacturers warranty is governed by the laws of the country in which you purchased your Belkin, Linksys or Wemo product. In many countries, consumers have rights under local consumer laws. Those consumer rights may differ between countries, states and provinces, and often cannot be excluded. Your local consumer rights organization can advise you on your legal rights. This manufacturers warranty is not intended to:
change or exclude any rights under consumer law that cannot be lawfully changed or excluded; or limit or exclude any right you have against the person who sold the Belkin, Linksys or Wemo product to you if that person has breached their sales contract with you. WHAT DOES THIS WARRANTY COVER?
Belkin warrants that the product hardware and any software media (i.e., media on which the product software is provided) will be free from defects in materials and workmanship under normal use during the Warranty Period described below. This means that the product wont be defective, and that it will look and work as advertised during the relevant period. the product was not installed, operated, repaired, or maintained in accordance with Belkins instructions;
the product has been subjected to abnormal physical or electrical stress, misuse, negligence, or accident;
damage to the product is cosmetic, including scratches and dents, or defects caused by normal wear and tear or normal aging of the product;
This warranty does not apply to products purchased from a source other than Belkin or a Belkin Authorized Reseller. the serial number on the product has been altered, defaced, or removed; or How long is the product warranted?
Belkin warrants that the hardware in this Belkin, Linksys or WeMo product, and any associated software media, will be free from defects in materials and workmanship under normal use during the Warranty Period. The Warranty Period begins on the date the product was purchased by the original end-user purchaser and lasts for the period set out in the table below:
Product Type New products Refurbished products Warranty Period 12 Months 90 days Repaired or replacement products The longer of the original Warranty Period or 30 days Software media (if provided with the product) 90 days A claim under this warranty is only eligible if it is made within the Warranty Period. What isnt covered?
Belkin does not give any warranty:
in relation to software or services, provided by Belkin or any third party, included in or with the product;
that the product, software or services will always operate uninterrupted or error free;
that the product, software or services, or any equipment, system or network on which the product, software or services are used are 100% secure and cannot be hacked; or that a third party service the product needs will always be available. Note: Although Belkin does not make these promises in this warranty, you may have additional rights under consumer laws. Will this warranty always apply?
This warranty does not apply if:
the product has been tampered with or the assembly seal has been removed or damaged;
the product has been altered or modified by someone other than Belkin;
the warranty claim was made fraudulently or by misrepresentation;
the product was supplied or licensed for beta, evaluation, testing or demonstration purposes, and you didnt buy or license the product. Note: Although this warranty doesnt apply in these situations, you may have additional rights under consumer laws. How will Belkin make things right?
If you make an eligible claim under this warranty, Belkin will, at its election:
repair the product with new or refurbished parts, or pay the reasonable costs of repairing the product;
replace the product with a reasonably available equivalent new or refurbished Belkin, Linksys or Wemo product; or refund you the purchase price of the product, minus any rebates and discounts. Any repaired or replacement products are warranted for the remainder of the original Warranty Period or 30 days, whichever is longer. All products and parts that are replaced become the property of Belkin. Note: The rights and remedies outlined above are the only rights and remedies available under this warranty. However, you may have additional rights under consumer laws. GENERAL EXCLUSIONS AND LIMITATIONS OF LIABILITY IN THOSE JURISDICTIONS WHERE IT CAN LAWFULLY DO SO, AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, BELKIN, ITS RESELLERS AND ITS SUPPLIERS HEREBY DISCLAIM AND EXCLUDE ALL OTHER WARRANTIES, EXPRESS, STATUTORY OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY, ACCEPTABILITY, SATISFACTORY QUALITY, NON-INFRINGEMENT, TITLE, FITNESS FOR A PARTICULAR PURPOSE, LOSS OF OR DAMAGE TO DATA, LACK OF VIRUSES OR FREE FROM VIRUS OR MALWARE ATTACK, SECURITY, PERFORMANCE, LACK OF NEGLIGENCE, WORKMANLIKE EFFORT, QUIET ENJOYMENT, THAT THE FUNCTIONS CONTAINED IN THE PRODUCT WILL MEET YOUR REQUIREMENTS, OR THAT DEFECTS IN THE PRODUCT WILL BE CORRECTED, OR THAT YOUR USE OF THE PRODUCT WILL GENERATE ACCURATE, RELIABLE, TIMELY RESULTS, INFORMATION, MATERIAL OR DATA. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY BELKIN, A DEALER, AGENT OR AFFILIATE SHALL CREATE A WARRANTY. TO THE EXTENT WARRANTIES CANNOT BE DISCLAIMED OR EXCLUDED, THEY ARE LIMITED TO THE DURATION OF THE RELEVANT EXPRESS WARRANTY PERIOD. EXCEPT AS PROVIDED IN THIS WARRANTY AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL BELKIN, ITS AFFILIATES, ASSOCIATES, DEALERS, AGENTS OR SUPPLIERS OR THEIR RESPECTIVE OFFICERS, DIRECTORS, EMPLOYEES, LICENSORS AND ASSIGNS BE LIABLE FOR ANY DIRECT, INDIRECT, EXEMPLARY, PUNITIVE, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING BUT NOT LIMITED TO DAMAGES FOR LOSS OF PROFITS OR REVENUE, FOR BUSINESS INTERRUPTION, FOR PERSONAL INJURY, FOR LOSS OF PRIVACY, FOR LOSS OF ABILITY TO USE ANY THIRD PARTY PRODUCTS OR SERVICES, FOR FAILURE TO MEET ANY DUTY INCLUDING OF GOOD FAITH OR OF REASONABLE CARE, 127 127
[5]
[5]
127 127
[5]
[5]
508 508
[20]
[20]
PRINT SPECS:
PRINT SPECS:
Color Plates:
Color Plates:
K Finish:
Finish:
Notes:
Notes:
ACCORDION FOLD, PRINT BOTH SIDES ALL TEXT AND GRAPHIC ELEMENTS COLOR: BLACK R E V O C T N O R F Business Unit:
Business Unit:
NET-Networking NET-Networking Program Manager:
Program Manager:
Packaging Engineer:
Packaging Engineer:
Brian Byrd Brian Byrd Retail Outside Dimension (Including Hang Tab) Retail Outside Dimension (Including Hang Tab) L x W x D (in):
L x W x D (in):
5 x 5 x 5 5 x 5 x 5 127.00 x 127.00 x 127.00 127.00 x 127.00 x 127.00 L x W x D (mm):
L x W x D (mm):
DIE/MATERIAL SPECS:
DIE/MATERIAL SPECS:
Material:
Material:
Please refer to drawing Please refer to drawing Blank Size (in):
Blank Size (in):
Blank Size (mm):
Blank Size (mm):
20 x 5 20 x 5 508 x 127 508 x 127 This dieline works for following skus (if any):
This dieline works for following skus (if any):
Unit:
Unit:
Side Shown:
Side Shown:
Flute/Grain:
Flute/Grain:
IN/MM IN/MM PRINT SIDE PRINT SIDE horizontal horizontal Tolerance:+/- 1/32" - 0.8mm Tolerance:+/- 1/32" - 0.8mm Drawing Scale 1:1 Drawing Scale 1:1 RELEASE DATE: 07/20/2017 RELEASE DATE: 07/20/2017 DIELINE:
DIELINE:
FINAL FINAL THIS DOCUMENT & THE INFORMATION THIS DOCUMENT & THE INFORMATION IN IT ARE THE CONFIDENTIAL PROPERTY IN IT ARE THE CONFIDENTIAL PROPERTY OF BELKIN INTERNATIONAL AND MUST OF BELKIN INTERNATIONAL AND MUST NOT BE COPIED, REPRODUCED OR USED NOT BE COPIED, REPRODUCED OR USED IN ANY MANNER WITHOUT THE WRITTEN IN ANY MANNER WITHOUT THE WRITTEN CONSENT OF BELKIN CORPORATION. CONSENT OF BELKIN CORPORATION. IT MUST BE RETURNED UPON REQUEST IT MUST BE RETURNED UPON REQUEST DO NOT PRINT DO NOT PRINT DIE LINES, PRINTERS NOTES DIE LINES, PRINTERS NOTES