Die Line File:
Die Line File:
Die Line File:
Artwork File:
Artwork File:
Artwork File:
FDL_MSKU_WEMO_4 PAGE_HF_FCC FDL_MSKU_WEMO_4 PAGE_HF_FCC FDL_MSKU_WEMO_4 PAGE_HF_FCC INS_WLS0403_WLS0403-CA_8850-00867_RevA00_3WayLightSwitch_FCC REV REV REV 0 0 0 00 00 00 Business Unit:
Business Unit:
Business Unit:
Program Manager:
Program Manager:
Program Manager:
Packaging Engineer:
Packaging Engineer:
Packaging Engineer:
NET-Networking NET-Networking NET-Networking Brian Byrd Brian Byrd Brian Byrd Retail Outside Dimension (Including Hang Tab) Retail Outside Dimension (Including Hang Tab) Retail Outside Dimension (Including Hang Tab) L x W x D (in):
L x W x D (in):
L x W x D (in):
L x W x D (mm):
L x W x D (mm):
L x W x D (mm):
DIE/MATERIAL SPECS:
DIE/MATERIAL SPECS:
DIE/MATERIAL SPECS:
Material:
Material:
Material:
80 gsm woodfree paper 80 gsm woodfree paper 80 gsm woodfree paper Blank Size (in):
Blank Size (in):
Blank Size (in):
Blank Size (mm):
Blank Size (mm):
Blank Size (mm):
7.295 x 4.675 7.295 x 4.675 7.295 x 4.675 185.297 x 118.756 185.297 x 118.756 185.297 x 118.756 DIE LAYOUT DIE LAYOUT DIE LAYOUT FCC - 80 GSM WOOD FREE PAPER FCC - 80 GSM WOOD FREE PAPER FCC - 80 GSM WOOD FREE PAPER I N N O V A T I O N C R E A T I V E G R O U P PR# 57080 INS_WLS0403_WLS0403-CA_8850-00867_RevA00_3WayLightSwitch_FCC WLS0403, WLS0403-CA P#
8850-00867 REV A00 Shiho DATE 11/30/18 5:10 PM VERSION 08 FILE NAME SKU#
DESIGNER MARKETING:
PRODUCT MGNT:
RC:
SUSTAINABILITY:
CREATIVE:
PROOFING:
APPROVED APPROVED W/ CHANGES RESUBMIT APPROVED APPROVED W/ CHANGES RESUBMIT APPROVED APPROVED W/ CHANGES RESUBMIT SIGN/DATE SIGN/DATE SIGN/DATE APPROVED APPROVED W/ CHANGES RESUBMIT SIGN/DATE APPROVED APPROVED W/ CHANGES RESUBMIT SIGN/DATE APPROVED APPROVED W/ CHANGES RESUBMIT SIGN/DATE FRONT FRONT FRONT BACK BACK BACK This dieline works for following skus (if any):
This dieline works for following skus (if any):
This dieline works for following skus (if any):
Page 4 (Back) Page 4 (Back) Page 4 (Back) Page 1 (Cover) Page 1 (Cover) Page 1 (Cover) Page 2 Page 2 Page 2 Page 3 Page 3 Page 3 118.76 118.76 118.76
[4+11/16]
[4+11/16]
[4+11/16]
Dclaration dInnovation, Sciences et Dveloppement conomique Canada relative lexposition aux rayonnements :
Cet quipement respecte les limites imposes par ISDE en matire dexposition aux rayonnements dans un environnement non contrl. Il doit tre install et utilis en laissant une distance minimale de 20 cm entre le radiateur et vous. Configuration requise :
Routeur sans-fil Android 6.0 ou version plus rcente, iOS 11,0 ou version plus rcente Caractristiques gnrales :
Caractristiques lectriques dentre : 120 V~, 15 A, 60 Hz Caractristiques lectriques de sortie maximum : 120 V~, charge rsistive 15 A, incandescent 600 W WiFi : 2,4GHz 802.11n Entretien :
Utilisez un chiffon sec sur lextrieur du dispositif. Afin dviter tout choc lectrique ou dendommager votre dispositif, NUTILISEZ PAS de solution liquide. Attention :
Risque de choc lectrique. Plusieurs sectionneurs peuvent tre ncessaires pour mettre lquipement hors tension avant toute maintenance. Destin uniquement un usage domestique lintrieur dans un lieu sec. Pour les connexions dalimentation, veuillez utiliser des fils de 14 AWG ou plus gros, rsistant des tempratures suprieures ou gales 90 C. Toute modification qui na pas t expressment approuve par la partie responsable des questions de conformit pourrait annuler le droit de lutilisateur de se servir de cet quipement. Pour viter tout danger ou risque de choc lectrique d au branchement dun appareil sur un interrupteur dclairage 3 bornes, veuillez lire et vous assurer de bien comprendre le guide dutilisation de lappareil branch, avant de le faire fonctionner avec un interrupteur dclairage 3 bornes. Si vous ne suivez pas les instructions susmentionnes ou si la mthode dutilisation de lquipement diffre de celle dcrite par le fabricant, la protection assure par lquipement risque dtre altre. Le dispositif peut tre mis en marche ou arrt en touchant le bouton blanc sur lavant du dispositif, ou en utilisant lapplication WEMO. Pour plus de renseignements, rendez-vous ladresse suivante :
http://www.wemo.com/support.html 8850-00867 Rev. A00 92.65 92.65 92.65
[3+21/32]
[3+21/32]
[3+21/32]
The following paragraphs are required by the FCC and prove that this product meets all regulatory limits with regard to radio interference and radiation exposure. If you use this product as intended you will have no issues with either. FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa Vista, CA 90094, declare under our sole responsibility that the product, WLS0403, to which this declaration relates, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the distance between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. 185.3 185.3 185.3
[7+9/32]
[7+9/32]
[7+9/32]
Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Innovation, Science and Economic Development Canada Statement:
This digital apparatus complies with CAN ICES-3(B)/NMB-3(B). This device complies with ISEDs license-exempt RSS standards. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Innovation, Science and Economic Development Canada Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Recycling programs for this packaging may not exist in your area. System Requirements:
WiFi router Android 6.0 or later, iOS 11.0 or later General Specifications:
Input Electrical Rating: 120V~, 15A, 60Hz Max Output Electrical Rating: 120V~, 15A Resistive Load, 600W Incandescent WiFi: 2.4GHz 802.11n Care:
Use dry cloth on exterior of the device. To avoid shock hazard and/or damage to device, DO NOT use any liquid solution. Caution:
Risk of Electric Shock More than one disconnected switch may be required to de-energize the equipment before servicing. For residential and Indoor Dry Location Use Only. For supply connections, use 14 AWG or larger wires rated for at least 90 C. Changes or modifications not expressly approved by party responsible for compliance could void the users authority to operate the equipment. To avoid any risk or hazard that may be caused due to the end product connected to 3-Way Light Switch, please read and understand the operation of the connected equipment before operating with 3-Way Light Switch. If any of the above instructions are not followed, or the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired. Device can be toggled on/off by touching the white button on the front of the unit, or by using the WEMO App. For support, please visit: http://www.wemo.com/support.html Les paragraphes suivants sont requis par la FCC afin de dmontrer que ce produit respecte toutes les limites rglementaires en matire dinterfrences radio et dexposition aux rayonnements. Si vous utilisez ce produit conformment lusage prvu, vous ne rencontrerez aucun de ces deux problmes. Dclaration FCC DCLARATION DE CONFORMIT LA RGLEMENTATION FCC EN MATIRE DE COMPATIBILIT LECTROMAGNTIQUE Nous, Belkin International, Inc., sis au 12045 E. Waterfront Drive, Playa Vista, CA 90094, dclarons sous notre seule responsabilit que le produit WLS0403, auquel se rfre la prsente dclaration, est conforme aux normes nonces lalina 15 de la rglementation FCC. Le fonctionnement est assujetti aux deux conditions suivantes : (1) cet appareil ne peut pas provoquer dinterfrence nuisible, et (2) cet appareil doit accepter toute interfrence reue, y compris des interfrences pouvant entraner un fonctionnement non dsir. Avis de la Commission fdrale des communications (FCC) Ce dispositif a t test et jug conforme aux limites imposes pour les units numriques de classe B, en vertu de lalina 15 de la rglementation FCC. Ces limites visent assurer une protection raisonnable contre les interfrences en milieu rsidentiel. Ce dispositif gnre, utilise et peut mettre de lnergie radiolectrique et sil nest pas install et utilis selon les directives, peut causer des interfrences nuisibles aux communications radio. Cependant, il nexiste aucune garantie que des interfrences ne se produiront pas dans une installation particulire. Si cet quipement cause des interfrences nuisibles sur le plan de la rception radio ou tlvision, pouvant tre dtermines en mettant le dispositif sous et hors tension, lutilisateur est invit tester et corriger linterfrence en prenant une des mesures suivantes :
Rorienter ou changer la position de lantenne rceptrice. Augmenter la distance entre lquipement et le rcepteur. Brancher lquipement sur une prise de courant appartenant un circuit diffrent de celui sur lequel est branch le rcepteur. Demander lassistance du fournisseur ou dun technicien de tl ou de radio expriment. Mise en garde de la FCC : Toute modification qui na pas t expressment approuve par la partie responsable des questions de conformit pourrait annuler le droit de lutilisateur de se servir de cet quipement. nonc concernant lexposition aux rayonnements Cet quipement respecte les limites imposes par la FCC en matire dexposition aux rayonnements dans un environnement non contrl. Il doit tre install et utilis en laissant une distance minimale de 20 cm entre le radiateur et vous. Cet metteur ne doit pas tre install ou utilis de pair avec tout autre metteur ou antenne. Il se pourrait quil ny ait pas de programmes de recyclage pour cet emballage dans votre rgion. Dclaration dInnovation, Sciences et Dveloppement conomique Canada :
Ce priphrique numrique est conforme la norme CAN ICES-3(B)/NMB-3 (B). Cet appareil est conforme aux normes dexemption de licence RSS dISDE. Son fonctionnement est assujetti aux deux conditions suivantes : (1) ce dispositif ne doit pas provoquer dinterfrence prjudiciable; et (2) ce dispositif doit tolrer toute interfrence reue, y compris les interfrences qui peuvent causer un fonctionnement non souhait. PRINT SPECS:
PRINT SPECS:
PRINT SPECS:
Color Plates:
Color Plates:
Color Plates:
K Finish:
Finish:
Finish:
Notes:
Notes:
Notes:
ALL TEXT AND GRAPHIC ELEMENTS COLOR: BLACK IN/MM IN/MM IN/MM PRINT SIDE PRINT SIDE PRINT SIDE horizontal horizontal horizontal Unit:
Unit:
Unit:
Side Shown:
Side Shown:
Side Shown:
Flute/Grain:
Flute/Grain:
Flute/Grain:
Tolerance:+/- 1/32" - 0.8mm Tolerance:+/- 1/32" - 0.8mm Tolerance:+/- 1/32" - 0.8mm Drawing Scale 1:1 Drawing Scale 1:1 Drawing Scale 1:1 RELEASE DATE: 11/19/2018 RELEASE DATE: 11/19/2018 RELEASE DATE: 11/19/2018 DIELINE:
DIELINE:
DIELINE:
LEGEND:
LEGEND:
LEGEND:
Final Final Final Nitto Tape Nitto Tape Nitto Tape Screen Glue Screen Glue Screen Glue THIS DOCUMENT & THE INFORMATION THIS DOCUMENT & THE INFORMATION THIS DOCUMENT & THE INFORMATION IN IT ARE THE CONFIDENTIAL PROPERTY IN IT ARE THE CONFIDENTIAL PROPERTY IN IT ARE THE CONFIDENTIAL PROPERTY OF BELKIN INTERNATIONAL AND MUST OF BELKIN INTERNATIONAL AND MUST OF BELKIN INTERNATIONAL AND MUST NOT BE COPIED, REPRODUCED OR USED NOT BE COPIED, REPRODUCED OR USED NOT BE COPIED, REPRODUCED OR USED IN ANY MANNER WITHOUT THE WRITTEN IN ANY MANNER WITHOUT THE WRITTEN IN ANY MANNER WITHOUT THE WRITTEN CONSENT OF BELKIN CORPORATION. CONSENT OF BELKIN CORPORATION. CONSENT OF BELKIN CORPORATION. IT MUST BE RETURNED UPON REQUEST IT MUST BE RETURNED UPON REQUEST IT MUST BE RETURNED UPON REQUEST DO NOT PRINT DO NOT PRINT DO NOT PRINT DIE LINES, PRINTERS NOTES DIE LINES, PRINTERS NOTES DIE LINES, PRINTERS NOTES