DIE LAYOUT DIE LAYOUT DIE LAYOUT Die Line File:
Die Line File:
Die Line File:
IDL_RE9000_US_CA_QIG IDL_RE9000_US_CA_QIG IDL_RE9000_US_CA_QIG Artwork File:
Artwork File:
Artwork File:
QSG_RE9000_8820-02636_RevA01 105 GSM C2S ARTPAPER 105 GSM C2S ARTPAPER 105 GSM C2S ARTPAPER FRONT FRONT FRONT Frequently asked questions (FAQ) Why can I not find Linksys Extender Setup in my Wi-Fi list?
Make sure the light on the range extender is blinking orange. If you still cant see the setup network, move the device being used for setup closer to the range extender. Wait for a blinking orange light and refresh the Wi-Fi list. On browser-based setup, why do I not see the setup screen on http://extender. linksys.com?
On your devices Wi-Fi manager, make sure Linksys Extender Setup is selected, then refresh your browser. On browser-based setup, why can I not see my network name on the Choose your wireless page?
Your range extender might be too far from the router. Move it closer and refresh the list. I correctly entered my network password during browser-based setup. Why does the Enter your password page still show an error?
The range extender likely is at the outside limit of the router's signal. The signal could be getting interrupted before your password makes it to the router. Move your range extender closer to the router. Why cant I connect my range extender with WPS?
There are a number of reasons that WPS could fail:
Your router and range extender are too far apart The two-minute connection window expired The WPS button on either range extender or router did not depress all the way WPS is disabled on the router MAC filtering is enabled on the router How do I reset the range extender to factory defaults?
Press the red reset button on the back of the range extender and hold until the light on the top starts blinking green. Why am I experiencing poor signal and slow speed on my range extender?
Be sure that youve placed your range extender in an ideal location, as indicated by Spot Finder Technology. NOTE: When you move around your home, your wireless devices may not disconnect from the router until they lose the Wi-Fi signal. This may occur even if the Wi-Fi signal from the range extender signal is stronger (and vice versa). If you are having connection issues, select the network with the stronger signal. For advanced configuration, consult the user guide at linksys.com/support/RE9000. Browser-based setup Use this setup method if you dont have a WPS button on your router, or if you dont want to use WPS to set up your RE9000. 1 Plug in the range extender. Plug in the range extender midway between your router and the area without Wi-Fi. Using your mobile device or laptop, be sure you have at least two bars (around 50%) of your routers Wi-Fi signal at that location. If you dont have two bars, move the range extender closer to the router. You can move the range extender to an ideal location later using the setup software. 3 4 Connect to Linksys Extender Setup network. On a computer, phone or tablet, connect to the Wi-Fi network:
Linksys Extender Setup. Launch setup Enter http://extender.linksys.com
(or try http://192.168.1.1) in a browser to complete setup. Follow the on-screen instructions to select your network to extend, customize your extended network name and password and find the best spot using Spot Finder Technology. 2 Wait for the light on the top of your range extender to blink orange. This can take up to a minute. 5 How to connect your Wi-Fi devices to the extended network you just created. If you have set up your range extender with a Linksys Max-Stream Router, you dont have to do anything. Max-Stream routers support seamless roaming, and your extended Wi-Fi network shares the same network name and password as your main 5 GHz band. Connected devices will select the main or extended network as you move around the coverage area. If you do not have a router with seamless roaming, select the extended network on your device's Wi-Fi manager. Extended networks are identified by Ext added to the end of your main network name(s). Password(s) will be the same as those for your main network(s). For advanced configuration, consult user guide at linksys.com/support/RE9000. 8820-02636 Rev. A01 Light Setting up as wired range extender
(access point) Browser-based setup 1 2 3 4 5 Prepare for setup Be sure your router has a working internet connection and you have an ethernet cable long enough to connect the router to the range extender. NoteDo not connect any devices other than your router to the range extender until setup is complete. Plug the range extender into a wall outlet. Wait for the blinking light to change from green to orange. Use an ethernet cable to connect the range extender to the LAN port of your router. Connect to the Linksys Extender Setup network. On a computer, phone, or tablet, connect to the Wi-Fi network Linksys Extender Setup. 6 Launch setup Enter http://extender.linksys.com
(or try http://192.168.1.1) in a browser to complete setup. Be sure to choose As a wired range extender (access point) when asked how you want to use your range extender. Follow the on-screen instructions to create a network name and password for your access point. FRONT COVER NEXT-GEN AC MAX-STREAM TRI-BAND AC3000 Wi-Fi RANGE EXTENDER Quick Start Guide 7 Connect your Wi-Fi devices to the extended network you just created. Select the extended network on your devices Wi-Fi manager. Extended network names and passwords Write down the extended network names and passwords you just created. Range extender admin password Write down your range extender admin password. You'll need the range extender admin password if you want to access your range extender settings. 2.4 GHz network name Admin password 2.4 GHz password 5 GHz network name 5 GHz password Get Help Internet: linksys.com/support Twitter: @LinksysCares Phone (US/Canada): 800-326-7114
(complimentary support during your warranty period) Model# RE9000 Whats in this Guide Side view Your Linksys extender Get started Setting up as a wireless range extender Setting up as a wired range extender (access point) FAQ WPS Button WPS buttonUse Wi-Fi Protected Setup to automatically and securely add compatible wireless devices to your network with Push Button Connect. BACK BACK BACK Your Linksys extender Front view Back view Light 1. Ethernet Ports 2. Reset Button 3. Power Port The light on the front of the range extender gives you information about power, updating and signal strength. Ethernet ports (1)Connect wired devices to these ports with ethernet cables. Reset button (2)Press and hold until the light on the front of the range extender blinks to reset extender to factory default settings. Power port (3)Connect the included AC power adapter. 127 127 127
[5]
[5]
[5]
Get started There are two ways to use your Linksys extender: as a wireless range extender or as a wired range extender (access point). Wireless range extenders boost Wi-Fi range for better coverage and increased signal strength. Wired range extender (access points) create new Wi-Fi hotspots when connected to a router with an Ethernet cable. Both scenarios require a router with a working internet connection. Before starting setup, decide whether you want to use your RE9000 as a wireless range extender or as a wired range extender (access point). Instructions for both setups are in this guide. Setting up as a wireless range extender Does your router have a WPS button?
WPS is a simple way to connect Wi-Fi devices with Push Button Connect. Routers that support WPS have a button that might look like one of these symbols:
Yes Continue with Wi-Fi Protected Setup (WPS) below No (or not sure) Continue with Browser-
based setup, also in this Quick Start Guide NOTE The WPS button will not work if you have disabled WPS on your router, or if you have chosen WEP as your network security type. In either case, continue with browser-based setup below. Wi-Fi Protected Setup (WPS) 1 Plug the range extender into an electrical outlet close to your router. You can move the range extender to an ideal location later in step 5. After the range extender is plugged in the indicator light on the top will blink green for up to a minute. 2 Wait for the light on the top of your range extender to blink orange before going to step 3. This can take up to a minute. Light 762 762 762
[30]
[30]
[30]
3 Extend your network. a. Press the WPS button on your router. Within the next two minutes press the WPS button on the side of your range extender. The WPS button will light up and the light on the top of your range extender will blink green. Watch the light on the top of your range extender to verify whether the connection was successful. If it turns solid green the connection was successful. Move to step 4.
, WPS Button If it starts to blink orange repeating step 3 or try browser-based setup.
, the connection failed. You may try again by 4 Move your range extender to an ideal spot. Unplug your range extender and plug it back in midway between your router and the area without Wi-Fi. Using your mobile device or laptop, be sure you have at least two bars (around 50%) of your routers Wi-Fi signal at that location. If you dont have two bars, move the range extender closer to the router. 5 Check light for connection quality. It can take up to a minute for the ranger extender to boot up after moving it. During this period you will see the blinking green light once again. Solid green Solid orange Blinking orange Ready to use. Weak connection to the router. Find an outlet closer to your router. Not connected to the router. Find an outlet closer to your router. 6 How to connect your Wi-Fi devices to the extended network you just created. If you have set up your range extender with a Linksys Max-Stream Router, you dont have to do anything. Max-Stream routers support seamless roaming, and your extended Wi-Fi network shares the same network name and password as your 5 GHz Wi-Fi band. Connected devices will select the main or extended network as you move around the coverage area. If you do not have a router with seamless roaming, select the extended network on your device's Wi-Fi manager. Extended networks are identified by "_Ext"
added to the end of your main network name(s). The password will be the same as your main network. Your range extender is now set up. Enjoy your extended Wi-Fi coverage. ICG PRODUCTION PR# 5737 FILE NAME QSG_RE9000_8820-02636_RevA01 SKU# RE9000 P# 8820-02636 DESIGNER jonathan REVISION A01 DATE August 28, 2017 5:25 PM VERSION 04 Accessing your range extender settings after setup Your range extenders default admin password is admin. It is highly recommended that you change this after WPS setup. To change or view range extender settings, first connect to an extended network. If your extended network has the same network name as your main network:
On a computer that is not connected to a wireless network, use an ethernet cable to connect directly to the range extender. Open a browser and go to extender.linksys.com. Connect to your range extender wirelessly. Depending on your operating system, one of the following links will get you to the login page. Choose one and enter it in your browser. OR Android and Windows: http://RE9000 Mac OS X or iOS: http://RE9000.local If your extended network has a different network name than your main network
(for example mywifi_EXT):
Connect to the extended network. In a browser, go to http://extender.linksys.com and enter your admin password. extender.linksys.com 177.8 177.8 177.8
[7]
[7]
[7]
PRINT SPECS:
PRINT SPECS:
PRINT SPECS:
Color Plates:
Color Plates:
Color Plates:
C Y M K Finish:
Finish:
Finish:
Notes:
Notes:
Notes:
ACCORDION FOLD ALONG RED LINES FRONT/OUTSIDE: ALL TEXT AND GRAPHIC ELEMENTS COLOR: CMYK BACK/INSIDE: ALL TEXT AND GRAPHIC ELEMENTS COLOR: CMYK R E V O C K C A B R E V O C T N O R F 6-Panel Accordion Fold REV REV REV 0 0 0 00 00 00 Business Unit:
Business Unit:
Business Unit:
Program Manager:
Program Manager:
Program Manager:
Packaging Engineer:
Packaging Engineer:
Packaging Engineer:
NET-Networking NET-Networking NET-Networking Brian Byrd Brian Byrd Brian Byrd Retail Outside Dimension (Including Hang Tab) Retail Outside Dimension (Including Hang Tab) Retail Outside Dimension (Including Hang Tab) L x W x D (in):
L x W x D (in):
L x W x D (in):
L x W x D (mm):
L x W x D (mm):
L x W x D (mm):
5 x 5 x 7 5 x 5 x 7 5 x 5 x 7 127.00 x 127.00 x 177.80 127.00 x 127.00 x 177.80 127.00 x 127.00 x 177.80 DIE/MATERIAL SPECS:
DIE/MATERIAL SPECS:
DIE/MATERIAL SPECS:
Material:
Material:
Material:
Please refer to drawing Please refer to drawing Please refer to drawing Blank Size (in):
Blank Size (in):
Blank Size (in):
Blank Size (mm):
Blank Size (mm):
Blank Size (mm):
30 x 7 30 x 7 30 x 7 762 x 177.800 762 x 177.800 762 x 177.800 This dieline works for following skus (if any):
This dieline works for following skus (if any):
This dieline works for following skus (if any):
IN/MM IN/MM IN/MM PRINT SIDE PRINT SIDE PRINT SIDE horizontal horizontal horizontal Unit:
Unit:
Unit:
Side Shown:
Side Shown:
Side Shown:
Flute/Grain:
Flute/Grain:
Flute/Grain:
Tolerance:+/- 1/32" - 0.8mm Tolerance:+/- 1/32" - 0.8mm Tolerance:+/- 1/32" - 0.8mm Drawing Scale 1:1 Drawing Scale 1:1 Drawing Scale 1:1 RELEASE DATE: 07/27/2017 RELEASE DATE: 07/27/2017 RELEASE DATE: 07/27/2017 DIELINE:
DIELINE:
DIELINE:
Intermediate Intermediate Intermediate THIS DOCUMENT & THE INFORMATION THIS DOCUMENT & THE INFORMATION THIS DOCUMENT & THE INFORMATION IN IT ARE THE CONFIDENTIAL PROPERTY IN IT ARE THE CONFIDENTIAL PROPERTY IN IT ARE THE CONFIDENTIAL PROPERTY OF BELKIN INTERNATIONAL AND MUST OF BELKIN INTERNATIONAL AND MUST OF BELKIN INTERNATIONAL AND MUST NOT BE COPIED, REPRODUCED OR USED NOT BE COPIED, REPRODUCED OR USED NOT BE COPIED, REPRODUCED OR USED IN ANY MANNER WITHOUT THE WRITTEN IN ANY MANNER WITHOUT THE WRITTEN IN ANY MANNER WITHOUT THE WRITTEN CONSENT OF BELKIN CORPORATION. CONSENT OF BELKIN CORPORATION. CONSENT OF BELKIN CORPORATION. IT MUST BE RETURNED UPON REQUEST IT MUST BE RETURNED UPON REQUEST IT MUST BE RETURNED UPON REQUEST DO NOT PRINT DO NOT PRINT DO NOT PRINT DIE LINES, PRINTERS NOTES DIE LINES, PRINTERS NOTES DIE LINES, PRINTERS NOTES
.3".3".3".3".138".138".138".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3".3"