FCC ID: XNI-LCI26516 Wireless Keypad

The device under test is manufactured by the grantee (Lippert Components) and sold as an OEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc, the grantee must ensure the end-user has all applicable / appropriate operating instructions. When end-user instructions are required, as in the case of this product, the grantee must notify the OEM to notify the end-user. Lippert Components will supply this document to the reseller/distributor dictating what must be included in the end users manual for the commercial product. INFORMATION TO BE INCLUDED IN THE END USER'S MANUAL The following information must be included in the end product users manual to ensure continued FCC and Industry Canada regulatory compliance. The ID numbers must be included in the manual if the device label is not readily accessible to the end user. The compliance paragraphs below must be included in the user's manual. This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s).Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Note: Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment. 8-Switch FCC ID: XNI-LCI26515 HVIN: 2026073177 PMN: 35172 IC: 23958-LCI26515 2-Swtich FCC ID: XNI-LCI26516 HVIN: 2026073174 PMN: 35175 IC: 23958-LCI26516

ABEL FCG ID: XNI-LCI26516 IDL ICID: 23958-LG126516 &

HVIN: 2026073174 LOCATION FCC 1D: XNjbBI2BSI6 IC ID: _23858-L 0/2851 HVIN: 2026073174

Willow Run (WR) Test Labs, Inc. 3615 E Grand River Rd., Williamston, Michigan 48895 USA Tel: (734) 252-9785, Fax: (734) 926-9785, e-mail: [email protected] Re: Certification for Lippert Components FCC ID: XNI-LCI26516 IC: 23958-LCI26516 REQUEST FOR CONFIDENTIALITY Pursuant to USA FCC 47 CFR 0.457(d) and 0.459 and Canada IC RSP-100, Section 10, Lippert Components requests that a part of the subject application be held confidential. Lippert Components has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to competition would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Exhibit Conf. Type Rational Permanent Exh 04 - Block Diagram Permanent Exh 05 - Schematics Exh 10 - BOM + Placement Permanent Exh 10 - Antenna Specification Permanent Includes proprietary internal oscillator information. Includes proprietary design information Includes proprietary design information Includes proprietary design information Long Term Confidentiality (Permanent): Lippert Components requests that any exhibits listed above as permanently confidential be permanently withheld from public review. Wherein Long Term Confidentiality is not an option for specific exhibits with ISED, this request applies only to the FCC application for those exhibits. Short-Term Confidentiality (FCC Only): Lippert Components requests that any exhibits selected above as short term confidential be withheld from public view for a period of days (noted above) from the date of the Grant of Equipment Authorization and prior to marketing. If there are any questions regarding the application or testing performed, please contact us at the above address or call (734) 252-9785, or e-mail [email protected]. Sincerely, Joseph D. Brunett Willow Run (WR) Test Labs, Inc.

CA LiPPERT RE: FCC ID: XNI-LCI26516, FRN: 0019004191 To Whom It May Concern:

Statement for 47 CFR section 2.911 d 5 i Lippert Components, 6801 15 Mile, Sterling Heights, MI 48312, certifies that as of the date of the application the equipment for which authorization is sought is not covered equipment!

prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not covered equipment. Additional Explanation: Not Applicable Statement for 47 CFR section 2.911 d 5 ii Lippert Components, 6801 15 Mile, Sterling Heights, MI 48312, (the applicant) certifies that, as of the date of the filing of this application, the applicant is not identified on the Covered List as an entity producing covered equipment. Grantee (the applicant) also certifies that, the device does not have cybersecurity and/or anti-

virus software produced by Kaspersky Lab, Inc. or any of its successors and assignees, identified on the Covered list installed on the device, nor will it be installed by the applicant anytime after certification. Thank you, Company: Lippert Components: Telephone: 248.278.0276 Title: Technical Integration Engineer 1_ The Commissions is published by the Public Safety and Homeland Security Bureau and posted on the Commissions website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes covered equipment. LCI #68 680115 Mile, Sterling Heights, MI 48312 Phone 248.583.1010 https://www.fec.gov/supplychain/coveredlist ichael Rymut

CJ ui PPERT _2_ Wall Gabee ATTENTION: FCC Certification Section 2.911(d)(7) Information Desi nated U.S. A ent Company Name: Lippert Components Contact Name: Michael Rymut Street Address: 6801 15 Mile City/Province/Zip : Sterling Heights, MI 48312 Telephone No: 248.278.0276 Fax No: 248.583.0527 email: [email protected] FRN #: 0019004191 This letter is to confirm that we (the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. Our signature below is further confirmation that we are located at the address listed above and are available to accept le al service at that location. U.S. Agent Signature:

Date: September 14, 2026 Signed by: Michael Rymut / Technical Integration Engineer The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Lippert Components Grantee Code: XNI FRN #: 0019004191 Contact Name: Michael Rymut Street Address: 6801 15 Mile City/Province/Zip: Sterling Heights, MI 48312 Telephone No: 248.278.0276 Email: [email protected] 4 Applicant Signature:

Date: September 14, 2026 Signed by: Michael Rymut / Technical Integration Engineer LCI #68 6801 15 Mile, Sterling Heights, M1 48312 Phone 248.583.1010

CJ LiPPERT A ent Authorization and Listin Attestation We appoint Jose h D. Brunett on behalf of Willow Run Test Labs Inc. and Amber Helm Develo ment LC to act as our agent in the preparation of applications for equipment certification and/or type examination. Furthermore, we authorize Willow Run Test Labs, Inc. associates (including but not limited to Approve-IT, Inc.) to act on our behalf in all acts relating to the worldwide approvals process. We further certify that submitted documents properly describe the device or system for which equipment certification is sought. We also certify that each unit manufactured, imported or marketed (as defined in Industry Canadas regulations) will have affixed to it a label identical to that submitted for approval with this application. Further, in accordance with section 6.5 of IC CB-02, we hereby acknowledge that our companys product cannot be distributed, leased or offered for sale in Canada until its listed on the Industry Canada Radio Equipment List (REL). For instances where our authorized agent signs an application for certification or type approval on our behalf, we acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by any TCB selected, including but not limited to American Certification Body, Inc. and/or TUV Rheinland Group and/or Vista Laboratories, Inc. and/or HCT America, Inc. and/or North American EMC Certification Services Inc., still resides with Lippert Components, 6801 15 Mile, Sterling Heights, MI 48312. For TCB applications, we certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) regarding certified equipment. Agency Agreement Expiration Date:

Dated this 17th day of June, 2026. By: Michael Rymut Title: Technical Integration Engineer email: [email protected] On behalf of: Lippert Components Telephone: 248.278.0276 LC] #68 680115 Mile, Sterling Heights, MI 48312 Phone 248.583.1010

Wireless Keypad Operation The wireless keypad is a coin cell battery powered switch array with a single integrated circuit (IC) containing both a microcontroller and radio frequency transmitter. The IC monitors the switch array and transmits status messages using Frequency Shift Keyed (FSK) modulation centered at 433.92MHz. The device operates at 2 power levels. The periodic TX is lower power and complies with periodic rules 15.231(e) while the manual button mode complies with activated rules (15.231(a)) The radio frequency signal is derived from an inductor-capacitor (LC) voltage-controlled oscillator and a frequency divider implemented on the IC using a complementary metal oxide semiconductor (CMOS) process. The LC oscillator is frequency trimmed by the IC manufacture. All digital systems clocks are derived from a low power 24 MHz system clock generator. After battery insertion, operation begins with the first key press. The majority of time is spent in stop mode, where the microcontroller ceases operation of high frequency oscillators to reduce operating current. A very low power oscillator allows sub micro-current operation and a periodic wake-up every 15 minutes to transmit a radio frequency message that confirms interim connectivity and indicates battery voltage. When a switch is pressed, the microcontroller enters operational mode, scans the keypad, and continually transmits the SW_ASSERTED radio frequency encoded status message indicating the specific switch(es) pressed until release of all switches. Light Emitting Diodes (LEDs) provide backlighting of the keypad while a switch is pressed. Two switches are simultaneously pressed to pair the keypad to the receiving module. The receiving module flow for pairing is summarized in the following diagram. After release of all switches the microcontroller transmits a SW_RELEASED status message, pauses for 1.5 seconds, disables the LED drive circuit, and reverts to the stop mode. Page 1 of 1 LIPPERT TECHNOLOGIES 14SEP2026

Willow Run (WR) Test Labs, Inc. 3615 E Grand River Rd., Williamston, Michigan 48895 USA Tel: (734) 252-9785, Fax: (734) 926-9785, e-mail: [email protected] Attn.:Certification and Engineering Bureau, Innovation, Science and Economic Development Canada 3701 Carling Avenue, Bldg. 94 Ottawa, Ontario K2H 8S2 Re: Certification for Lippert Components 2026073174 IC: 23958-LCI26516 If necessary, we have enclosed application materials for certification of Lippert Components 2026073174. It has been verified to comply with ISED RSS-210v11/GENv5. Current Variants:

There is only a single variant of the EUT, as tested. If there are any questions regarding the application or testing performed, please contact us at the above address or call (734) 252-9785, or e-mail [email protected]. Sincerely, Joseph D. Brunett Willow Run (WR) Test Labs, Inc. Willow Run (WR) Test Labs, Inc. 3615 E Grand River Rd., Williamston, Michigan 48895 USA Tel: (734) 252-9785, Fax: (734) 926-9785, e-mail: [email protected] Attn.:Federal Communications Commission Equipment Approval Services P.O. Box 358315 Pittsburgh, PA 15251-5315 Re: Certification for Lippert Components 2026073174 FCC ID: XNI-LCI26516 If necessary, we have enclosed application materials for certification of Lippert Components 2026073174. It has been verified to comply with CFR Title 47, Part 15.231. Current Variants:

There is only a single variant of the EUT, as tested. If there are any questions regarding the application or testing performed, please contact us at the above address or call (734) 252-9785, or e-mail [email protected]. Sincerely, Joseph D. Brunett Willow Run (WR) Test Labs, Inc.