LM505 USB Adapter Bluetooth HCI USB Nano Adapter with Broadcom Chip 1 Features Compatible with Bluetooth v2.1+EDR specication. Backward compatible with Bluetooth 2.0 + EDR devices Support Maximum Asynchronous Data Rate 3 Mbps Provide data access via USB 2.0 interface Low power consumption 2.4 - 2.4835 GHz ISM Band Operation Very small Size (23 mm x 20 mm) Class 2 adapter with upto 10 m in open space Product: LM505 Part No: 505-0511 Datasheet Rev 1.0/25-07-12 BT v2.1 USB Adapter Wide range of Bluetooth proles supported (like HF, A2DP, OPP, FTP, DUN, PAN, SPP proles etc) Eliminates the need of cable between your computer and other Bluetooth Devices Stereo Audio supported. VoIP calls over Bluetooth also supported Interoperable with PDAs, Phones Supported by Windows XP, VISTA & 7 Bluetooth Driver. No need for an additional driver 2 Description LM505 EDR Nano USB Adapter is one of the worlds smallest adapter which ts discreetly into the USB port of a Laptop or PC. This is a very small form factor and high performance adapter which allows you to connect to upto 7 Bluetooth devices simultaneously. The adapter integrates high performance Bluetooth Radio, Baseband, Link Manager, Host Controller Interface and can be used with Widcomm Software or Windows Bluetooth Driver which oers a huge range of Bluetooth proles for variety of connectivity applications. The adapter is ideally suited for Bluetooth connectivity to serial adapter, laptops, PC, Mono and stereo headsets. Due to its small size, high performance, low power consumption and high sensitivity this adapter is ideally suited for Bluetooth connectivity applications where the adapter can t discreetly into portable devices that have USB port. This adapter can also be embedded in other products in modular form by removing the housing and USB connector. LM Technologies also produces the modular form of this product called LM505 Module. LM505 Page 1 of 3
+44(0)207 428 2647 | www.lm-technologies.com | sales@lm-technologies.com 3 Packaging Options AO - Adapter Only Part No 505-0511 1x Bluetooth USB Adapter 4 General Specification Product: LM505 Part No: 505-0511 Datasheet Rev 1.0/25-07-12 Specication Product Name Chipset Bluetooth Standard Frequency Band Modulation Method Spread Spectrum Transfer Rate (Max) RF Output Power Working Distance Rx Sensitivity Input Voltage I/O Interface LED indicator OS Support Size Software/Drivers Bluetooth Proles Description LM505 Bluetooth USB Nano Adapter Broadcom BCM2046 Bluetooth v2.1 + EDR 2.4 - 2.4835 GHz ISM Band GFSK for 1 Mbps, /4-DQPSK for 2 Mbps, 8-DPSK for 3 Mbps FHSS (Frequency Hopping Spread Spectrum) 3 Mbps enhanced data rate Class 2 10 m - 25 m in open space
-80 dBm at 0.1 % BER DC 5V (via USB port) USB 2.0 Power/Active Win XP/VISTA/7 23(L) x 19(W) x 8(H) mm Windows XP/VISTA/7, Widcomm GAP,SPP,HSP, HFP, DUN, FTP, FAX, PAN, LAN, HID, SYNC, HCRP, A2DP, AVRCP, BIP, GOEP, SDAP, OPP 5 FCC Regulation Statement This device complies with Part 15 and 15B of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Installation and use of this device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the users authority to operate the equipment. The manufacturer is not responsible for any radio or LM505 Page 2 of 3
+44(0)207 428 2647 | www.lm-technologies.com | sales@lm-technologies.com Product: LM505 Part No: 505-0511 Datasheet Rev 1.0/25-07-12 television interference caused by unauthorized modication of this device, or the substitution of the connecting cables and equipment other than manufacturer specied. It is the responsibility of the user to correct any interference caused by such unauthorized modication, substitution or attachment. Manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failing to comply with these guidelines. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. LM505 Page 3 of 3
+44(0)207 428 2647 | www.lm-technologies.com | sales@lm-technologies.com