Instructions for 50 Series Mini Transmitters
(
) 8 Function shown t LED Blinks when ransmitter is active. ON utton is pressed. b while transmitting Pulses b when attery is low. when a ransmitter t b STOP utton switches off the eceiver and the keypad function buttons r Function uttons b SAFETY FEATURE
!
The ransmitter automatically transmits a signal after 30 minutes; this de-activates the eceiver and the ransmitter. STOP t r t To register Transmitters to the Receiver 1. Coding into Slot 1 SET Button activates the Receiver and the keypad function buttons 2 r elease crews for attery ompartment b s c at rear. x 2 AAA Alkaline batteries TX5008 Effective working range up to a distance of 60 metres (200 feet) 50 Series PRESS HOLD
&
STOP
(Red) both
(Green) and SET MINIMUM for a of 5 SECONDS
!
1. 2. 3. 4. 5. 6. 7. ON SET STOP Receiver on Transmitter until LED goes Ensure Receiver is OFF Press and hold and LED on Transmitter will flash once to indicate slot 1 Turn Wait for green LED on Receiver to flash slowly Press and hold SET quickly several times Check Receiver is coded correctly by pressing SET then operating any function on Transmitter until green LED on Receiver flashes OFF F1 F2 Then PRESS
&
HOLD SET for 5 seconds 2. Coding into Slot 2 1. 2. 3. 4. 5. 6. 7. 8
. SET OFF STOP SET ON on Transmitter until LED goes to select slot 2 the LED on Transmitter will flash twice Ensure Receiver is OFF Press and hold and LED on Transmitter will flash once to indicate slot 1 Press Turn Wait for green LED on Receiver to flash slowly Press and hold SET quickly several times Check Receiver is coded correctly by pressing SET then operating any functio on Transmitter until green LED on Receiver flashes Receiver n If you have any problems please phone either your local Distributor or Lodar directly:-
U 1922 613633. US 877- 257-1581. K +44
+1-
(0) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 50TX.0 E.A4 6