all | frequencies |
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|
manuals | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
User Manual (Statement) rev | Users Manual | 116.47 KiB | ||||
1 2 3 |
|
User Manual | Users Manual | 770.43 KiB | ||||
1 2 3 |
|
Internal Photos rev | Internal Photos | 5.08 MiB | ||||
1 2 3 |
|
External Photos rev | External Photos | 851.54 KiB | ||||
1 2 3 |
|
ID Label Sample and Location Information | ID Label/Location Info | 40.17 KiB | ||||
1 2 3 |
|
Cover Letter - Agent Authorization | Cover Letter(s) | 75.56 KiB | ||||
1 2 3 |
|
Cover Letter - BT Declaration Letter rev1 | Cover Letter(s) | 25.21 KiB | ||||
1 2 3 |
|
Cover Letter - Confidentiality Request | Cover Letter(s) | 106.33 KiB | ||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Setup Photos | |||||||
1 2 3 | Test Setup Photos |
1 2 3 | User Manual (Statement) rev | Users Manual | 116.47 KiB |
FCCstatement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1)thisdevicemaynotcauseharmfulinterference,and2)thisdevicemustacceptany interferencereceived,includinginterferencethatmaycauseundesiredoperation. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.Thisequipmentgenerates,uses,andcanradiateradiofrequencyenergyand,ifnot installedandusedinaccordancewiththeinstructionmanual,maycauseharmfulinterferenceto radiocommunications.Operationofthisequipmentinaresidentialareaislikelytocauseharmful interferenceinwhichcasetheuserwillberequiredtocorrecttheinterferenceathisownexpense. Warning:Whereshieldedinterfacecablesoraccessorieshavebeenprovidedwiththeproductor specifiedadditionalcomponentsoraccessorieselsewheredefinedtobeusedwiththeinstallation of the product, they must be used in order to ensure compliance with FCC. Changes or modifications to product not expressly approved by Logitech, Inc could void your right to use or operateyourproductbytheFCC. RadiationExposureStatement:
This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm betweentheradiator&yourbody. This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. ICstatement:CANICES003(A)/NMB003Class(A) ThisdevicecomplieswithIndustryCanadalicenceexemptRSSstandard(s).Operationissubjectto thefollowingtwoconditions:(1)thisdevicemaynotcauseinterference,and(2)thisdevicemust acceptanyinterference,includinginterferencethatmaycauseundesiredoperationofthedevice. Cordless(RadioTransmitter)products:RSS247(2.4GHztransmittersortransceivers):ThisCategory IradiocommunicationdevicecomplieswithRSS247ofIndustryCanada. DclarationIC:CANICES003(A)/NMB003Class(A) Cedispositifestconforme lanorme/auxnormesCNRexemptesdelicenceduMinistrecanadien del'Industrie.Sonutilisationestsoumiseauxdeuxconditionssuivantes:(1)ledispositifconcern nedoitpascauserd'interfrenceset(2)ildoitacceptertouteinterfrencereue,ycomprislesinterf rencesrisquantd'engendrerunfonctionnementindsirable. Produits sans fil (metteur radiolectrique): CNR247 (metteurs ou rcepteurs 2,4 GHz): Ce dispositif communicationradiolectriquedecatgorieIestconforme lanormeCNR210etdu ministrecanadiendel'Industrie. Dclarationd'expositionauxradiations:
Dclarationsurlaradioexposition:cetquipementestconformeauxlimitationsprvuesparlaFCC et l'IC quant l'exposition aux radiations dans le cadre d'un environnement non contrl. Cet quipement doit tre install et utilis en respectant une distance minimale de 20 cm entre le radiateuretl'utilisateur. Cetmetteurnedoitpastreinstallouutilisenconjonctionavecuneautreantenneouunautre metteur.
1 2 3 | User Manual | Users Manual | 770.43 KiB |
MeetUp Setup Guide
| Guide dinstallation English 3 Franais 10 Espaol 17 Portugus 24 2 WHATS IN THE BOX 1 2 3 4 5 6 7 x4 x4 Important Safety, Compliance and Warranty Information Informations importantes concernant la scurit, la mise en conformit et la garantie English Read Manual Before Product Use. your mouth for any reason as they may be swallowed accidentally. Always check medication before ingesting as adults have mistaken button batteries for pills or tablets. If a button battery is ingested, seek medical attention immediately. Contact the National Battery Ingestion Hotline at (3333-625 (202. It is available 24 hours a day. POWER SUPPLY WARNING! The power supply is for indoor use only. Only use the power supply included with your product. Do not attempt to repair or use a damaged power supply. Do not immerse the power supply in water or subject it to physical abuse. Inspect the power supply regularly for cable, plug, and casing damage. BATTERY WARNING!: Improperly replaced batteries may present a risk of leak or explosion and personal injury. Mistreated rechargeable batteries may present a risk of re or chemical burn. Do not disassemble or expose to conducting materials, moisture, liquid, or heat above 54C (130F). Do not use or charge the battery if it appears to be leaking, discolored, deformed, or in any way abnormal. Do not leave your battery discharged or unused for extended periods. Do not short circuit. Your device may contain an internal, rechargeable battery that is not replaceable. Battery life varies with usage. Non-operational batteries should be discarded according to local laws. If no laws or regulations govern, dispose of your device in a waste bin for electronics. Keep batteries away from children. BUTTON BATTERIESWARNING! Coin-sized and button batteries may be easily swallowed, which may cause personal injury and death in children and senior citizens. Keep these batteries away from children! Do not allow children to play with or be in contact with these batteries or this product at any time. Add further security to the battery compartment as necessary. Never place batteries in Safe Usage Guidelines for Products Do not open or modify the product except for battery removal and replacement. Do not disassemble or attempt to service this product. This product is safe under normal and reasonably foreseeable operating conditions. If product is operating improperly, call Logitech support. Product must be returned to the manufacturer for any service or repair. This is not a Childrens Product and is not intended for use by children under 14 years old. Warning: Not suitable for children under 36 months. Small parts. Choking hazard. Mount camera properly according to the provided instructions. Improper installation of this product may cause damage or injury. Logitech Compliance. For Product Safety, EMC, RF and Energy information, go to www.logitech.com/compliance. Maintenance is not required for product compliance. FCC statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Warning: Where shielded interface cables or accessories have been provided with the product or specied additional components or accessories elsewhere dened to be used with the installation of the product, they must be used in order to ensure compliance with FCC. Changes or modications to product not expressly approved by Logitech, Inc could void your right to use or operate your by the FCC. Radiation Exposure Statement: This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Caution: (i) the device for operation in the band 5250-5150 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii) high-power radars are allocated as primary users (i.e. priority users) of the bands -5250 5350 MHz and 5850-5650 MHz and that these radars could cause interference and/or damage to LE-LAN devices. IC statement: CAN ICES003- (A) / NMB003- Class (A) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cordless (Radio Transmitter) products: RSS210- and RSS2.4)247- GHz transmitters or transceivers): This Category I radio communication device complies with RSS210- and RSS247- of Industry Canada. 1. MeetUp camera and speakerphone unit 2. Remote control 3. 5m USB cable 4. Power adapter 5. Wall mounting bracket 6. Wall mounting hardware 7. Documentation English 3 WHATS WHAT CAMERA SPEAKERPHONE 1 2 5 43 1. Security slot 2. Remote control pairing 3. USB 4. Power 5. Optional expansion microphone 4 English REMOTE 1 2 3 4 5 7 1. Microphone mute 2. Call answer 3. Call end 4. Bluetooth pairing 5. Volume up/down 6. Zoom in/out 6 8 9 7. Camera pan/tilt 8. Camera home 9. Camera preset
* Please note that not all applications support call answer and end buttons English 5 Thanks for buying MeetUp. We think youll find the extra wide field of view will help everyone feel included in the meeting, enhancing communication. PLACEMENT We recommend placing the camera as close to eye level as possible Best results typically come from mounting below the monitor 1. Place on a table or shelf near the monitor 2. Connect the cables 3. Mount on the wall:
a. Attach bracket to the wall Please use the appropriate type of screws for your wall type b. Attach the camera to the bracket 4. Mount to the TV: An optional TV mount bracket is available on Logitech com 6 English 3. Connect the TV to the computer CONNECTION Connecting MeetUp is the same whether you plan on using a dedicated computer in the room, or your team members bring a laptop to the room to run the meeting 1. Plug MeetUp into power 2. Connect the USB cable from MeetUp to the computer Diagram of all connections:
HDMI USB English 7 MAKE MEETUP THEDEFAULTDEVICE Ensure that MeetUp is chosen as the camera, speaker and microphone in your video conferencing applications Please consult the application documentation for further instructions on how to do this NOTE REGARDING 4K VIDEO The USB 2 0 cable included with MeetUp supports FullHD video
(up to 1080p) If you plan on using 4k video, please use a USB 3 0 cable
(not included) STARTING A VIDEO CALL After installing MeetUp and ensuring it is the default device in your video conferencing application, simply start the application in the normal manner and enjoy the benefits of improved audio and video PAIRING MEETUP TOABLUETOOTH DEVICE You can use MeetUp for audio calls when paired to a Bluetooth device To pair your Bluetooth device to MeetUp, follow these simple step:
1. Press and hold the Bluetooth button on the remote control until you see a flashing blue light near the camera lens 2. Place your mobile device in Bluetooth pairing mode and select Logitech MeetUp You are now ready to use MeetUp for audio calls Pressing the Bluetooth button on the remote after pairing will disconnect the Bluetooth device (it will still be paired but not connected) Pressing it again will reconnect the last paired device in range 8 English FOR MORE INFORMATION You can find additional information on MeetUp including:
FAQs Software to enable functions in various applications How to order replacement parts And more at www.Logitech.com/MeetUp PAIRING THE REMOTE CONTROL TO THE CAMERA Your camera and remote control are paired at the factory However, if you need to pair a remote to the camera
(such as when replacing a lost remote) do the following:
1. Press and hold button on the back of the camera until LED flashes blue 2. Press and hold the Bluetooth button on the remote for 10 seconds to place it in pairing mode 3. Once the remote and camera are paired the LED will stop flashing 4. If the pairing fails, the LEDs will keep flashing Start from step 2 and repeat English 9 CONTENU DU COFFRET 1 2 3 4 5 6 7 x4 x4 Important Safety, Compliance and Warranty Information Informations importantes concernant la scurit, la mise en conformit et la garantie English Read Manual Before Product Use. your mouth for any reason as they may be swallowed accidentally. Always check medication before ingesting as adults have mistaken button batteries for pills or tablets. If a button battery is ingested, seek medical attention immediately. Contact the National Battery Ingestion Hotline at (3333-625 (202. It is available 24 hours a day. POWER SUPPLY WARNING! The power supply is for indoor use only. Only use the power supply included with your product. Do not attempt to repair or use a damaged power supply. Do not immerse the power supply in water or subject it to physical abuse. Inspect the power supply regularly for cable, plug, and casing damage. BATTERY WARNING!: Improperly replaced batteries may present a risk of leak or explosion and personal injury. Mistreated rechargeable batteries may present a risk of re or chemical burn. Do not disassemble or expose to conducting materials, moisture, liquid, or heat above 54C (130F). Do not use or charge the battery if it appears to be leaking, discolored, deformed, or in any way abnormal. Do not leave your battery discharged or unused for extended periods. Do not short circuit. Your device may contain an internal, rechargeable battery that is not replaceable. Battery life varies with usage. Non-operational batteries should be discarded according to local laws. If no laws or regulations govern, dispose of your device in a waste bin for electronics. Keep batteries away from children. BUTTON BATTERIESWARNING! Coin-sized and button batteries may be easily swallowed, which may cause personal injury and death in children and senior citizens. Keep these batteries away from children! Do not allow children to play with or be in contact with these batteries or this product at any time. Add further security to the battery compartment as necessary. Never place batteries in Safe Usage Guidelines for Products Do not open or modify the product except for battery removal and replacement. Do not disassemble or attempt to service this product. This product is safe under normal and reasonably foreseeable operating conditions. If product is operating improperly, call Logitech support. Product must be returned to the manufacturer for any service or repair. This is not a Childrens Product and is not intended for use by children under 14 years old. Warning: Not suitable for children under 36 months. Small parts. Choking hazard. Mount camera properly according to the provided instructions. Improper installation of this product may cause damage or injury. Logitech Compliance. For Product Safety, EMC, RF and Energy information, go to www.logitech.com/compliance. Maintenance is not required for product compliance. FCC statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Warning: Where shielded interface cables or accessories have been provided with the product or specied additional components or accessories elsewhere dened to be used with the installation of the product, they must be used in order to ensure compliance with FCC. Changes or modications to product not expressly approved by Logitech, Inc could void your right to use or operate your by the FCC. Radiation Exposure Statement: This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Caution: (i) the device for operation in the band 5250-5150 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii) high-power radars are allocated as primary users (i.e. priority users) of the bands -5250 5350 MHz and 5850-5650 MHz and that these radars could cause interference and/or damage to LE-LAN devices. IC statement: CAN ICES003- (A) / NMB003- Class (A) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cordless (Radio Transmitter) products: RSS210- and RSS2.4)247- GHz transmitters or transceivers): This Category I radio communication device complies with RSS210- and RSS247- of Industry Canada. 1. Camra avec haut-parleur intgr MeetUp 2. Tlcommande 3. Cble USB de 5 m 10 Franais 4. Adaptateur secteur 5. Support pour fixation murale 6. Matriel pour montage mural 7. Documentation DISPOSITIF HAUT-PARLEUR DE CAMRA 1 2 5 43 1. Emplacement de scurit 2. Couplage par tlcommande 3. USB 4. Alimentation 5. Extension microphones facultative Franais 11 TLCOMMANDE 1 2 3 4 5 7 6 8 9 7. Mouvement panoramique/
inclinaison de la camra 8. Accueil de la camra 9. Prrglage de la camra
* Veuillez noter que certaines applications ne prennent pas en charge les boutons de prise et de fin d'appel 1. Sourdine du microphone 2. Prise d'appel 3. Fin d'appel 4. Couplage Bluetooth 5. Volume +/-
6. Zoom avant/arrire 12 Franais Nous vous remercions d'avoir achet la camra MeetUp. Vous verrez comme le champ de vision extra-large permet d'inclure tous les participants la runion et d'optimiser la communication. INSTALLATION Nous vous recommandons de positionner la camra hauteur des yeux, dans la mesure du possible Les rsultats obtenus sont gnralement bien meilleurs lorsque le dispositif est install en dessous du moniteur 1. Placez la camra sur une table ou une tagre ct du moniteur 2. Connectez les cbles 3. Montez le dispositif au mur:
a. Fixez le support au mur Utilisez des vis adaptes votre type de mur b. Fixez la camra au support 4. Montage sur un tlviseur:
un support pour tlviseur
(en option) est disponible sur Logitech com Franais 13 3. Connectez le tlviseur l'ordinateur CONNEXION Que vous utilisiez un ordinateur ddi dans la salle de runion ou que les membres de votre quipe y apportent un ordinateur portable, le processus de connexion de la camra MeetUp reste le mme 1. Branchez la camra MeetUp une prise de courant 2. Connectez le cble USB de la camra MeetUp l'ordinateur Schma de l'ensemble des connexions:
HDMI USB 14 Franais CONFIGURATION DE LACAMRA MEETUP ENTANTQUE DE DISPOSITIF PAR DFAUT Vrifiez que la camra MeetUp est slectionne en tant que camra, haut-parleur et microphone dans vos applications de visioconfrence Veuillez consulter la documentation fournie avec vos applications pour savoir comment procder REMARQUE CONCERNANT LAVIDO 4K Le cble USB 2 0 fourni avec la camra MeetUp prend en charge les vidos Full HD (jusqu' 1080p) Si vous souhaitez passer au format vido 4k, veuillez utiliser un cble USB 3 0 (non fourni) DMARRER UN APPEL VIDO Aprs avoir install la camra MeetUp et l'avoir configure comme dispositif par dfaut dans votre application de visioconfrence, dmarrez l'application normalement et profitez d'une qualit audio et vido optimale COUPLAGE DE LA CAMRA MEETUP UN DISPOSITIF BLUETOOTH Vous pouvez utiliser la camra MeetUp pour des appels audio lorsqu'elle est couple un dispositif Bluetooth Pour coupler votre dispositif Bluetooth la camra MeetUp, procdez comme suit:
1. Maintenez appuy le bouton Bluetooth de la tlcommande jusqu' ce que le tmoin prs de la lentille de la camra clignote en bleu 2. Activez le couplage Bluetooth de votre dispositif mobile et slectionnez "Logitech MeetUp"
Vous pouvez maintenant utiliser MeetUp pour vos appels audio Si vous appuyez sur le bouton Bluetooth de la tlcommande aprs avoir effectu le couplage, le dispositif Bluetooth sera dconnect (le couplage sera tabli, mais pas la connexion) Le fait d'appuyer sur le bouton une seconde fois reconnectera le dernier dispositif coupl dans la zone de porte de la camra Franais 15 POUR EN SAVOIR PLUS Des informations supplmentaires sur la camra MeetUp sont disponibles, notamment:
Questions frquentes Logiciels permettant d'activer des fonctions dans diffrentes applications Modalits de commande de pices de rechange Et bien plus encore, l'adresse www.Logitech.com/MeetUp COUPLAGE DE LATLCOMMANDE LACAMRA Votre camra et sa tlcommande sont couples en usine Cependant, si vous souhaitez coupler une autre tlcommande la camra (lorsque vous avez gar la tlcommande d'origine, par exemple), procdez comme suit:
1. Maintenez appuy le bouton l'arrire de la camra jusqu' ce que le tmoin lumineux clignote en bleu 2. Appuyez sur le bouton Bluetooth de la tlcommande pendant 10 secondes pour la passer en mode de couplage 3. Une fois tlcommande et la camra couples, le tmoin lumineux cesse de clignoter 4. Si le couplage choue, les tmoins lumineux continueront de clignoter Reprenez l'ensemble de la procdure partir de la deuxime tape 16 Franais CONTENIDO DE LA CAJA 1 2 3 4 5 6 7 x4 x4 Important Safety, Compliance and Warranty Information Informations importantes concernant la scurit, la mise en conformit et la garantie English Read Manual Before Product Use. your mouth for any reason as they may be swallowed accidentally. Always check medication before ingesting as adults have mistaken button batteries for pills or tablets. If a button battery is ingested, seek medical attention immediately. Contact the National Battery Ingestion Hotline at (3333-625 (202. It is available 24 hours a day. POWER SUPPLY WARNING! The power supply is for indoor use only. Only use the power supply included with your product. Do not attempt to repair or use a damaged power supply. Do not immerse the power supply in water or subject it to physical abuse. Inspect the power supply regularly for cable, plug, and casing damage. BATTERY WARNING!: Improperly replaced batteries may present a risk of leak or explosion and personal injury. Mistreated rechargeable batteries may present a risk of re or chemical burn. Do not disassemble or expose to conducting materials, moisture, liquid, or heat above 54C (130F). Do not use or charge the battery if it appears to be leaking, discolored, deformed, or in any way abnormal. Do not leave your battery discharged or unused for extended periods. Do not short circuit. Your device may contain an internal, rechargeable battery that is not replaceable. Battery life varies with usage. Non-operational batteries should be discarded according to local laws. If no laws or regulations govern, dispose of your device in a waste bin for electronics. Keep batteries away from children. BUTTON BATTERIESWARNING! Coin-sized and button batteries may be easily swallowed, which may cause personal injury and death in children and senior citizens. Keep these batteries away from children! Do not allow children to play with or be in contact with these batteries or this product at any time. Add further security to the battery compartment as necessary. Never place batteries in Safe Usage Guidelines for Products Do not open or modify the product except for battery removal and replacement. Do not disassemble or attempt to service this product. This product is safe under normal and reasonably foreseeable operating conditions. If product is operating improperly, call Logitech support. Product must be returned to the manufacturer for any service or repair. This is not a Childrens Product and is not intended for use by children under 14 years old. Warning: Not suitable for children under 36 months. Small parts. Choking hazard. Mount camera properly according to the provided instructions. Improper installation of this product may cause damage or injury. Logitech Compliance. For Product Safety, EMC, RF and Energy information, go to www.logitech.com/compliance. Maintenance is not required for product compliance. FCC statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Warning: Where shielded interface cables or accessories have been provided with the product or specied additional components or accessories elsewhere dened to be used with the installation of the product, they must be used in order to ensure compliance with FCC. Changes or modications to product not expressly approved by Logitech, Inc could void your right to use or operate your by the FCC. Radiation Exposure Statement: This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Caution: (i) the device for operation in the band 5250-5150 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii) high-power radars are allocated as primary users (i.e. priority users) of the bands -5250 5350 MHz and 5850-5650 MHz and that these radars could cause interference and/or damage to LE-LAN devices. IC statement: CAN ICES003- (A) / NMB003- Class (A) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cordless (Radio Transmitter) products: RSS210- and RSS2.4)247- GHz transmitters or transceivers): This Category I radio communication device complies with RSS210- and RSS247- of Industry Canada. 1. Cmara MeetUp y unidad de sistema manos libres 2. Control remoto 3. Cable USB de 5 m 4. Adaptador de corriente 5. Soporte de montaje en pared 6. Accesorios para montaje en pared 7. Documentacin Espaol 17 QU ES CADA COSA SISTEMA MANOS LIBRES DECMARA 1 2 5 43 1. Conector de seguridad 2. Emparejamiento del remoto 3. USB 4. Alimentacin 5. Micrfono de expansin opcional 18 Espaol REMOTO 1 2 3 4 5 7 1. Silenciamiento de micrfono 2. Respuesta de llamada 3. Finalizacin de llamada 4. Emparejamiento Bluetooth 5. Subir y bajar volumen 6. Zoom para ampliar/reducir 6 8 9 7. Panormica/inclinacin de cmara 8. Centrar cmara 9. Valores predeterminados de cmara
* Ten en cuenta que no todas las aplicaciones admiten los botones de respuesta y finalizacin de llamada Espaol 19 Gracias por comprar MeetUp. Pensamos que apreciars que el campo visual extra amplio ayudar a que todos se sientan incluidos en la reunin, lo que mejorar la comunicacin. COLOCACIN Recomendamos colocar la cmara lo ms cerca posible de la altura de la mirada Los mejores resultados suelen obtenerse con el montaje debajo del monitor 1. Coloca en una mesa o estante b. Acopla la cmara al soporte cerca del monitor 2. Conecta los cables 3. Monta en la pared:
a. Monta el soporte en la pared Usa el tipo de tornillos adecuado para el tipo de pared 4. Monta en el televisor:
En Logitech com encontrars un soporte de montaje en televisor opcional 20 Espaol 3. Conecta el televisor a la computadora CONEXIN La conexin de MeetUp es la misma tanto si piensas usar una computadora exclusiva en la sala como si los miembros del equipo llevan una laptop a la sala para realizar la reunin 1. Conecta MeetUp a la alimentacin 2. Conecta el cable USB de MeetUp a la computadora Diagrama de todas las conexiones:
HDMI USB Espaol 21 CONFIGURA MEETUP COMO DISPOSITIVO PREDETERMINADO Asegrate de elegir MeetUp como cmara, altavoz y micrfono en las aplicaciones de videoconferencia Consulta la documentacin de la aplicacin para ms instrucciones sobre cmo hacerlo NOTA SOBRE VIDEO 4K El cable USB 2 0 incluido con MeetUp admite video Full HD (hasta 1080p) Si piensas usar video 4K, usa un cable USB 3 0 (no incluido) INICIO DE UNA VIDEOCONFERENCIA Despus de la instalacin de MeetUp y de asegurarte de que sea el dispositivo predeterminado en la aplicacin de videoconferencia, inicia la aplicacin del modo normal y disfruta de las ventajas del audio y video mejorados 22 Espaol EMPAREJAMIENTO DE MEETUP A UN DISPOSITIVO BLUETOOTH Puedes usar MeetUp para llamadas de audio cuando est emparejada con un dispositivo Bluetooth Para emparejar el dispositivo Bluetooth a MeetUp, sigue estos simples pasos:
1. Mantn pulsado el botn de Bluetooth en el remoto hasta que se vean destellos azules cerca de la lente de la cmara 2. Coloca el dispositivo mvil en modo de emparejamiento Bluetooth y selecciona Logitech MeetUp Ya puedes usar MeetUp para llamadas de audio Al pulsar el botn de Bluetooth en el remoto despus del emparejamiento se desconectar el dispositivo Bluetooth
(seguir emparejado, pero no conectado) Al volver a pulsarlo se reconectar el ltimo dispositivo emparejado dentro del radio de accin PARA OBTENER MSINFORMACIN Encontrar informacin adicional sobre MeetUp, que incluye:
Preguntas ms habituales Software para activar funciones en varias aplicaciones Cmo pedir piezas de repuesto Y ms en www.Logitech.com/MeetUp EMPAREJAMIENTO DELREMOTO CON LACMARA La cmara y el remoto vienen emparejados de fbrica Sin embargo, si tienes que emparejar un remoto con la cmara (como al sustituir un remoto extraviado), haz lo siguiente:
1. Mantn pulsado el botn en la parte posterior de la cmara hasta que el LED emita destellos azules 2. Mantn pulsado el botn de Bluetooth en el remoto durante 10 segundos para activar el modo de emparejamiento 3. Cuando el remoto y la cmara estn emparejados, el LED dejar de emitir destellos 4. Si el emparejamiento falla, el LED seguir emitiendo destellos Inicia desde el paso 2 y repite Espaol 23 ITENS INCLUDOS NA EMBALAGEM 1 2 3 4 5 6 7 x4 x4 Important Safety, Compliance and Warranty Information Informations importantes concernant la scurit, la mise en conformit et la garantie English Read Manual Before Product Use. your mouth for any reason as they may be swallowed accidentally. Always check medication before ingesting as adults have mistaken button batteries for pills or tablets. If a button battery is ingested, seek medical attention immediately. Contact the National Battery Ingestion Hotline at (3333-625 (202. It is available 24 hours a day. POWER SUPPLY WARNING! The power supply is for indoor use only. Only use the power supply included with your product. Do not attempt to repair or use a damaged power supply. Do not immerse the power supply in water or subject it to physical abuse. Inspect the power supply regularly for cable, plug, and casing damage. BATTERY WARNING!: Improperly replaced batteries may present a risk of leak or explosion and personal injury. Mistreated rechargeable batteries may present a risk of re or chemical burn. Do not disassemble or expose to conducting materials, moisture, liquid, or heat above 54C (130F). Do not use or charge the battery if it appears to be leaking, discolored, deformed, or in any way abnormal. Do not leave your battery discharged or unused for extended periods. Do not short circuit. Your device may contain an internal, rechargeable battery that is not replaceable. Battery life varies with usage. Non-operational batteries should be discarded according to local laws. If no laws or regulations govern, dispose of your device in a waste bin for electronics. Keep batteries away from children. BUTTON BATTERIESWARNING! Coin-sized and button batteries may be easily swallowed, which may cause personal injury and death in children and senior citizens. Keep these batteries away from children! Do not allow children to play with or be in contact with these batteries or this product at any time. Add further security to the battery compartment as necessary. Never place batteries in Safe Usage Guidelines for Products Do not open or modify the product except for battery removal and replacement. Do not disassemble or attempt to service this product. This product is safe under normal and reasonably foreseeable operating conditions. If product is operating improperly, call Logitech support. Product must be returned to the manufacturer for any service or repair. This is not a Childrens Product and is not intended for use by children under 14 years old. Warning: Not suitable for children under 36 months. Small parts. Choking hazard. Mount camera properly according to the provided instructions. Improper installation of this product may cause damage or injury. Logitech Compliance. For Product Safety, EMC, RF and Energy information, go to www.logitech.com/compliance. Maintenance is not required for product compliance. FCC statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Warning: Where shielded interface cables or accessories have been provided with the product or specied additional components or accessories elsewhere dened to be used with the installation of the product, they must be used in order to ensure compliance with FCC. Changes or modications to product not expressly approved by Logitech, Inc could void your right to use or operate your by the FCC. Radiation Exposure Statement: This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Caution: (i) the device for operation in the band 5250-5150 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii) high-power radars are allocated as primary users (i.e. priority users) of the bands -5250 5350 MHz and 5850-5650 MHz and that these radars could cause interference and/or damage to LE-LAN devices. IC statement: CAN ICES003- (A) / NMB003- Class (A) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cordless (Radio Transmitter) products: RSS210- and RSS2.4)247- GHz transmitters or transceivers): This Category I radio communication device complies with RSS210- and RSS247- of Industry Canada. 1. Unidade de cmara e altifalante MeetUp 2. Controlo remoto 3. Cabo USB de 5 m 24 Portugus 4. Adaptador de alimentao 5. Suporte de montagem na parede 6. Hardware de montagem na parede 7. Documentao IDENTIFICAO DE COMPONENTES ALTIFALANTE DA CMARA 1 2 5 43 1. Ranhura de segurana 2. Emparelhamento do controlo remoto 3. USB 4. Alimentao 5. Microfone de expanso opcional Portugus 25 CONTROLO REMOTO 1 2 3 4 5 7 9 6 8 1. Silenciar microfone 2. Atender chamada 3. Terminar chamada 4. Emparelhamento Bluetooth 5. Aumentar/diminuir o volume 6. Ampliar/reduzir 7. Rodar/inclinar cmara 8. Incio da cmara 9. Predefinio da cmara
* Tenha em ateno que nem todas as aplicaes suportam os botes de atender e terminar chamada 26 Portugus Obrigado por adquirir o MeetUp. Acreditamos que ir verificar que o campo de viso extra largo ajuda toda a gente a sentir-se includa na reunio, melhorando a comunicao. COLOCAO Recomendamos que coloque a cmara o mais prxima possvel do nvel dos olhos Normalmente, obtm-se os melhores resultados quando se coloca em baixo do monitor 1. Coloque numa mesa ou estante b. Fixe a cmara no suporte prximas do monitor 2. Ligue os cabos 3. Montagem na parede:
a. Fixe o suporte na parede Utilize o tipo de parafusos adequado ao seu tipo de parede 4. Montagem na TV: Est disponvel um suporte de montagem em TV em Logitech com Portugus 27 3. Ligue a TV ao computador LIGAO Ligar o MeetUp sempre igual, caso pretenda utilizar um computador dedicado numa sala ou caso os membros da equipa tragam um computador porttil para a sala para dirigir a reunio 1. Ligue o MeetUp alimentao 2. Ligue o cabo USB do MeetUp ao computador Diagrama de todas as ligaes:
HDMI USB 28 Portugus TORNAR O MEETUP ODISPOSITIVO PREDEFINIDO Certifique-se de que o MeetUp est seleccionado como cmara, altifalante e microfone nas aplicaes de conferncia de vdeo Consulte a documentao da aplicao para obter instrues adicionais acerca de como efectuar esta aco NOTA RELACIONADA COM OVDEO 4K O cabo USB 2 0 includo no MeetUp suporta vdeo Full HD (at 1080 p) Se pretender utilizar vdeo 4k, utilize um cabo USB 3 0 (no includo) INICIAR UMA CHAMADA DEVDEO Aps instalar o MeetUp e certificar-
se de que o dispositivo predefinido na aplicao de conferncia de vdeo, inicie simplesmente a aplicao normalmente e desfrute das vantagens de udio e vdeo melhorados EMPARELHAR O MEETUP COM UM DISPOSITIVO BLUETOOTH Pode utilizar o MeetUp para chamadas de udio quando estiver emparelhado com um dispositivo Bluetooth Para emparelhar o dispositivo Bluetooth com o MeetUp, sigas este simples passo:
1. Mantenha premido o boto Bluetooth no controlo remoto at ver uma luz intermitente azul junto da lente da cmara 2. Coloque o dispositivo mvel em modo de emparelhamento Bluetooth e seleccione "Logitech MeetUp"
Est agora pronto para utilizar o MeetUp para chamadas de udio Premir o boto Bluetooth no controlo remoto aps o emparelhamento desliga o dispositivo Bluetooth
(continuar "emparelhado", mas no
"ligado") Premi-lo novamente restabelece ligao com o ltimo dispositivo emparelhado dentro do alcance Portugus 29 EMPARELHAR O CONTROLO REMOTO COM A CMARA A cmara e o controlo remoto esto emparelhados de fabrico No entanto, se for necessrio emparelhar um controlo remoto com a cmara (ao substituir um controlo remoto perdido, por exemplo), efectue o seguinte:
1. Mantenha premido o boto na parte posterior da cmara at que o LED fique intermitente a azul PARA OBTER MAISINFORMAES Pode encontrar informaes adicionais sobre o MeetUp, incluindo:
Perguntas frequentes Software para activar funes em vrias aplicaes Como encomendar peas de substituio E muito mais em www.Logitech.com/MeetUp 2. Mantenha premido o boto Bluetooth no controlo remoto durante 10 segundos para o colocar em modo de emparelhamento 3. Quando o controlo remoto e a cmara estiverem emparelhados, o LED deixar de estar intermitente 4. Se o emparelhamento falhar, os LED continuaro intermitentes Comece no passo 2 e repita o processo 30 Portugus 2017 Logitech Logitech, Logi and other Logitech marks are owned by Logitech andmay be registered All other trademarks are the property of their respective owners Logitech assumes no responsibility for any errors that may appear in this manual Information contained herein is subject to change without notice 2017 Logitech Logitech, Logi et les autres marques Logitech sont la proprit deLogitech et sont susceptibles dtre dposes Toutes les autres marques sont laproprit exclusive de leurs dtenteurs respectifs Logitech dcline toute responsabilit encas derreurs susceptibles de stre glisses dans le prsent manuel Les informations nonces dans ce document peuvent faire lobjet de modifications sans avis pralable 620-007607 003
1 2 3 | ID Label Sample and Location Information | ID Label/Location Info | 40.17 KiB |
FCC LABEL & Label LOCATION The label will be permanently affixed at a conspicuous location on the device.
(Fig.1) FCC ID: JNZVR0007
1 2 3 | Cover Letter - Agent Authorization | Cover Letter(s) | 75.56 KiB |
LOGITECH FAR EAST LTD.
=2 Creation Rd. 4, Science-Based Ind. Park Hsinchu Taiwan, R.O.C. AGENCY AUTHORIZATION LETTER To whom it may concern:
We, the undersigned, hereby authorize (name: Amanda Wu and Title: Senior Specialist) of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by (name: Amanda Wu and Title: Senior Specialist) of BV CPS Taoyuan on our behalf shall have the same effect as acts of our own. ;
If you have any questions regarding the authorization, please dont hesitate to contact us. FCC ID: JNZVRO0007 Sincerely yours, T.C. Chang / Sr. Manager AP Region Compliance LOGITECH FAR EAST LTD. Tel: +886 3 5778241* 2146 Fax: +886 3 5792393 E-mail: tchang2@logitech.com 05/10/2017
1 2 3 | Cover Letter - BT Declaration Letter rev1 | Cover Letter(s) | 25.21 KiB |
DECLARATION LETTER We, LOGITECH FAR EAST LTD., hereby declare that we had two BT chip to support BLE &
BT-EDR function, BT chip (Model: nRF52832, Brand: Nordic) supports BLE & BT-EDR, there is only BLE function while shipping and another BT chip (Model: CSR8811, Brand: QUALCOMM) supports BLE & BT-EDR, there is only BT-EDR function while shipping. If you have any questions regarding the authorization, please dont hesitate to contact us. Date: 2017-05-26 FCC ID: JNZVR0007 IC: 4418A-VR0007 Thank you!
Sincerely yours,
T.C. Chang / Sr. Manager AP Region Compliance LOGITECH FAR EAST LTD. Tel: +886 3 5778241* 2146 Fax: +886 3 5792393 E-mail: tchang2@logitech.com 05/26/2017
1 2 3 | Cover Letter - Confidentiality Request | Cover Letter(s) | 106.33 KiB |
LOGITECH FAR EAST LTD. a2 Creation Rd. 4, Science-Based Ind. P i Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: JNZVRO007 To Whom It May Concern:
Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 8 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission's policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until November 16, 2017. External Photos Internal Photos User Manual Test Setup photos It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards
T.C. Chang / Sr. Manager AP Region Compliance Logitech Far East Ltd. TELE: 886-3-5778241--2146 FAX: 886-3-5792393 05/10/2017
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2017-05-31 | 2402 ~ 2480 | DTS - Digital Transmission System | Original Equipment |
2 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
3 | JBP - Part 15 Class B Computing Device Peripheral |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2017-05-31
|
||||
1 2 3 | Applicant's complete, legal business name |
Logitech Far East Ltd
|
||||
1 2 3 | FCC Registration Number (FRN) |
0007134034
|
||||
1 2 3 | Physical Address |
#2 Creation Rd. 4, Science-Based Ind. Park
|
||||
1 2 3 |
Hsinchu, 300
|
|||||
1 2 3 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
t******@us.bureauveritas.com
|
||||
1 2 3 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 3 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
JNZ
|
||||
1 2 3 | Equipment Product Code |
VR0007
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
B**** C****
|
||||
1 2 3 | Title |
Sr. Certification Engineer
|
||||
1 2 3 | Telephone Number |
886-3******** Extension:
|
||||
1 2 3 | Fax Number |
886-3********
|
||||
1 2 3 |
b******@logitech.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 11/16/2017 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 3 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 3 | JBP - Part 15 Class B Computing Device Peripheral | |||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Camera and Speakerphone unit | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Original Equipment | ||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. | ||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
|
||||
1 2 3 | Name |
R****** C******
|
||||
1 2 3 | Telephone Number |
+886-******** Extension:
|
||||
1 2 3 | Fax Number |
+886-********
|
||||
1 2 3 |
r******@tw.bureauveritas.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 28 CC | 2402.00000000 | 2480.00000000 | 0.0010000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 28 CC | 2402.00000000 | 2480.00000000 | 0.0050000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15B | 28 CC |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC