FCC ID: 2AXAXW323 Samba Pad Magnetic 2-in-1 Wireless Charger

Product Overview Connecting compatibility compatibility LED Indicator Samba Pad 2-in-1 Wireless Charger Magnetic Wireless Charging Pad Non-Magnetic Wireless Charging Pad 1. Insert the power adapter plug into the DC jack. Magnetic charging pad Non-Magnetic charging pad LED Indicator Power Adapter What's in the Box Samba Pad Magnetic 2-in-1 Wireless Charger *1 Power Adapter *1 User manual *1 Technical Parameters Input Output 9V 2.22A iPhone 7.5W Samsung 10W AirPods 5W Adapter Model PA20-US Input Output 100-240V~ 50/60 HZ 0.5AMax 9V 2.22A 2. Use the AC adapter to power the wireless charger.

iPhone Charging Mode Settings 1. 2. 3. 4. 1. Plug in the power adapter, the indicator light will light up faintly and keep on. Weak light 2. When any charging pad is working, the indicator light will be bright, and it will turn into a weak light after 5 seconds. Bright light 5 seconds 3. When there is metal on the charging pad, or the phone strays too far, the light will flash until the fault is corrected. 5. Flashing Charging Mode Settings Important Safety Instructions Tips 1. Pry from the groove on the side of the charging Pad to lift it up. Pad Mode Lay the device flat on the charging pad. 2. Pull the charging pad up, you can use the Hover mode. Hover Mode. In this mode, you can adjust the angle of the iPhone at will, and even rotate it at will. TipsIt is highly recommended to charge your device in this mode. Charging is faster in hover mode as it is more conducive to cooling. And easier to place and remove your device. Tips :

The charging speed is related to the ambient temperature. For fast charging, please place the wireless charger in a cool and ventilated place. For example, a cool room, or near a fan or air conditioner. Do not expose it to direct sunlight; or place it near hot objects. Such as electrical appliances, heating, fireplaces, etc. Ventilated No direct sunlight Keep cool Keep away from heat Avoid dropping. Do not disassemble. Do not expose to liquids. Only use the original power adapter. This product is suitable for moderate climates only. The maximum ambient temperature during use of this product must not exceed 40C. Open flame sources, such as candles, must not be placed on this product. Only use a dry cloth or brush to clean this product. Do not put anything else between your smartphone and the wireless charger such as credit cards, door keys, coins, metal, NFC cards, etc. Make sure to place the device in the center of the charging pad. Improper placement may result in heat generation or non-charging. Product name: Samba Pad Magnetic 2-in-1 Wirless Charger Model : W323 2AXAXW323 6. 7. 8. 9. 10.

= BCTC ac BCTC 10 20 30 40 50 60 70 80 9020 8

8 R So. 2 s

ES 3 o

Happ TTT 441 OL OZ OF Ov OS 09 OZ 08 06 YN} 01 Oz OF OF OS 09 OZ 08 06 00z9!

20 30 40 50 60 70 80 9049 Z0z o ov 0s 09 04 08 06 00bo1 oz oF oF os 09 oz 08 06 00Z01 oz oF oF os os Sedliuslueslilivlivilinitis livstntivalinstialuaalipaovnliastiitsualinaly i leulialialynl Samba Pad Magnetic 2-in-1 Wireless Charger Model: W323 Brand: Zechin Input: 9V = 2.224 Output:10W FE ce &

FCC ID : 2AXAXW323 Manufacturer: Longconn Electronics(Shenzhen)Co,Ltd. Made in China DC Input v

LONGCONN ELECTRONICS (SHENZHEN) CO LTD Company: LONGCONN ELECTRONICS (SHENZHEN) CO LTD Address: Floor 3,B1 Block ,Xu Jing Chang Industrial Park, NO.39 HaoyeRoad,FuhaiStreet, Bao'an, Shenzhen, China Product Name: Samba Pad Magnetic 2-in-1 Wireless Charger Model Number(s): W323 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Linda Tsai Title:

Manager Date: 2022/10/08 Company: LONGCONN ELECTRONICS (SHENZHEN) CO LTD

LONGCONN ELECTRONICS (SHENZHEN) CO LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2AXAXW323 Date: 2022/10/08 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Linda Tsai Title: Manager