all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User manual | Users Manual | 2.27 MiB | January 06 2015 / August 06 2015 | |||
1 | Cover Letter(s) | February 02 2015 / August 06 2015 | ||||||
1 | Cover Letter(s) | February 02 2015 / August 06 2015 | ||||||
1 | Cover Letter(s) | February 02 2015 / August 06 2015 | ||||||
1 | External Photos | February 02 2015 / August 06 2015 | ||||||
1 | ID Label/Location Info | February 02 2015 / August 06 2015 | ||||||
1 | Internal Photos | February 02 2015 / August 06 2015 | ||||||
1 | RF Exposure Info | February 02 2015 / August 06 2015 | ||||||
1 | Cover Letter(s) | May 06 2015 / August 06 2015 | ||||||
1 | Cover Letter(s) | February 02 2015 / August 06 2015 | ||||||
1 | Test Report | February 02 2015 / August 06 2015 | ||||||
1 | Test Report | February 02 2015 / August 06 2015 | ||||||
1 | Test Setup Photos | February 02 2015 / August 06 2015 |
1 | User manual | Users Manual | 2.27 MiB | January 06 2015 / August 06 2015 |
UserManual OutdoorLongRange802.11a/n5GHz WirelessAP/CPE/Bridge(2T2R) LP2596K 1 TableofContents 1.Introduction................................................................................................................................. 4 1.1ProductIntroduction......................................................................................................... 5 1.2PackageContent................................................................................................................ 6 1.3ProductFeatures............................................................................................................... 7 1.4Application ........................................................................................................................ 7 1.4.1WirelessISP(WISP)Mode ..................................................................................... 7 1.4.2BridgeMode........................................................................................................... 8 1.5ProductOutlineIntroduction............................................................................................ 9 1.5.1Frontview .............................................................................................................. 9 1.5.2Backview ............................................................................................................... 9 1.5.3LEDIndication ...................................................................................................... 10 1.5.4I/OInterface......................................................................................................... 11 1.5.5MountingOptions................................................................................................ 12 2.HardwareInstallation................................................................................................................ 13 2.1Connectionoverview ...................................................................................................... 13 2.2InstallationSteps............................................................................................................. 13 2.3IPSurveillance................................................................................................................. 15 3. Software Configuration............................................................................................................. 17 3.1 System Requirements...................................................................................................... 17 3.2 Easy Installation.............................................................................................................. 17 3.3 Get started with LP-2596K ............................................................................................. 18 4. Software Features...................................................................................................................... 19 4.1 Operation Mode .............................................................................................................. 19 4.1.1 Access Point......................................................................................................... 19 4.1.2 Client.................................................................................................................... 27 4.1.3 WDS Access Point ............................................................................................... 35 4.1.4 WDS Client.......................................................................................................... 43 4.1.5 AP Router............................................................................................................. 51 4.1.6 Wireless ISP......................................................................................................... 65 4.2 System Configuration ..................................................................................................... 79 4.2.1 Device IP Settings................................................................................................ 79 4.2.2 Time Settings ....................................................................................................... 80 4.2.3 Password Settings ................................................................................................ 81 4.2.4 System Management............................................................................................ 82 4.2.5 Ping Watchdog ..................................................................................................... 83 4.2.6 Firmware Upgrade ............................................................................................... 84 4.2.7 Save and Restore.................................................................................................. 84 4.2.8 Factory Default .................................................................................................... 85 4.2.9 Reboot.................................................................................................................. 85 4.3 Tools................................................................................................................................ 86 4.3.1 Network Ping ....................................................................................................... 86 2 4.3.2 Network Traceroute ............................................................................................. 87 4.4 Device Status .................................................................................................................. 88 4.4.1 Device Information .............................................................................................. 88 4.4.2 Wireless Information............................................................................................ 89 4.4.3 LAN Information ................................................................................................. 89 4.4.4 Wireless Client Table ........................................................................................... 90 4.4.5 System LOG......................................................................................................... 90 5.Compliance ................................................................................................................................ 91 3 1.Introduction ThankyouforpurchasingLoopcommproduct.Atloopcommwestrivetoprovideyouwiththe highestqualityproductsthroughinnovationandadvancedtechnology.Weprideourselveson deliveringproductsthatoutperformthecompetitionandgobeyondyourexpectations.Ifyou haveanyquestionspleasefeelfreetocontactus.Wedlovetohearfromyouandthankyoufor yoursupport!
Email:support@loopcomm.com Website:www.loopcomm.com Notice ThisdocumentisissuedtoguideusershowtoinstallandoperateLP2596KOutdoorLong Range802.11a/nWirelessAP/CPE/Bridge.Pleasereadthedocumentcarefullytoavoidany damagewhichiscausedbyinappropriateuseexcludingfromthewarranty. LoopcommTechnologyInc.reservestherighttorevise/updatethecontentofLP2596K usermanualwithoutadvancenotice. 4 1.1ProductIntroduction LoopcommLP2596KisanOutdoorLongRange5GHzWirelessAP/CPE/Bridgethatprovides widecoverageofnetworkconnectioninexistingenvironment.Itcanoperateupto300Mbps dataratebysupportingIEEE802.11a/nstandardandwithfullWEP,WPA/WPA2datasecurity, WirelessLANAccessControlListandTKIP/AESencryption,Itkeepsthedatatransmissionsafein anynetworkconnectionmode.Moreover,itsupportsdifferentoperationmodesforanyusers applicationslikepointtopointnetworkandIPsurveillance. ProductOutline 5 1.2PackageContent Thepackagecontentincludesthefollowingitems,shownfromlefttorightasfigure. LP2596K Powercord DC24V/1APoweradapter UserManualCD QuickInstallationGuide(QIG) CableTie 6 1.3ProductFeatures WirelessStandards:IEEE802.11a/n Datatransmissionrateupto300Mbpsat40MHzbandwidth OperationMode:AccessPoint/Client/WDSAccessPoint/WDSClient/APRouter/WirelessISP ReliabledatasecurityincludingWEP,WPA/WPA2,WPAPSK/RADIUS,andWPA2PSK/RADIUS withTKIP/AESencryption. DFS(DynamicFrequencySelection)Channelsupported. SupportSNMPV2management,SSH,NTP,andTelnet. SupportQoSbandwidthcontrol MACAccessControl BuiltinWebbasedmanagementandfirmwareupgrade PoEpassthroughavailableonSecondaryEthernetport(ConfigurableviaWebUI) RemotelyenablesystemresetbyPoEInjector 1.4Application 1.4.1WirelessISP(WISP)Mode LP2596Kcanoperateasstation(client)inWISPmodetoremotelyreceivebroadbandsignal fromWISPoutdoorAP(basestation)ofInternetServiceProvider(ISP). 7 1.4.2BridgeMode SincetheantennacharacteristicsforLP2596Kisdirectionalwithhighgaindesign,itcan transmitRFsignalforseveralmiles.Basedonthispoint,LP2596Kisgreatlyusedtobridgeat longdistancetransmissionforpointtopointapplicationslikeIPsurveillance,networking company. 8 1.5ProductOutlineIntroduction 1.5.1Frontview 1.5.2Backview 9 1.5.3LEDIndication LEDIndicator Status Description TheLP2596KispoweredON. TheLP2596KispoweredOFF. Portlinked. Noconnection. DataisbeingtransmittedorreceivedontheSecondary Ethernetport. Portlinked. Noconnection. DataisbeingtransmittedorreceivedontheMain Ethernetport. ItstandsforconnectionqualityofStationmodeorAP mode. Secondary Main ON OFF ON OFF Blink ON OFF Blink SignalStrength AP/Stationmode Low,Medium,High 10 1.5.4I/OInterface Fields Description ItmainlyusedasPoweroverEthernet(PoE)port,whichallowstherouterpowered upbyPoEadapterwhentheconnectionisestablishedbyRJ45Cat.5cable.It supportsautosensingon10/100Mspeed,half/fullduplex,andcomplieswithIEEE 802.3/802.3urespectively. TheSecondaryEthernetportallowsuserstoconnecttoanotherdevicethroughRJ 45Cat.5cable.Itsupportsautosensingon10/100Mspeed,half/fullduplex,and complieswithIEEE802.3/802.3urespectively.
(Note:InOperationmodetheAProuterssecondaryportwillbeWANPortby default). Presscontinuallytheresetbuttonatleast5secondstoresettheconfiguration parameterstofactorydefaults Itusedtoconnectthemetallinetogroundinordertoavoidthedevicefrom externalelectricaldamage. Main Secondary ResetButton EarthGround Note.LP2596KbuiltinPoEpassthroughfunctiononSecondaryEthernetport.Itmeansthe SecondaryEthernetportisabletoprovide24Vpowerforasecondarydeviceifthisfunction enabledonWebConfiguration(PleaserefertothestatementonAdvancedSettingofRadio menu). 11 1.5.5MountingOptions PoleMount Usecabletieandmakeitpassthroughtheoneofmiddleholestofixandtieonthepole. WallMount PleasefixthescrewsintothewallandhangLP2596Konthecorrespondingscrews. 12 2.HardwareInstallation 2.1Connectionoverview 2.2InstallationSteps 1. Takeoffthewaterproofslidingcover. 2. ConnecttheMainEthernetportofLP2596KwithaRJ45cable. 13 Note.LP2596KbuiltinPoEpassthroughfunctiononSecondaryEthernetport.Itmeansthe SecondaryEthernetportisabletoprovide24Vpowerforasecondarydeviceifthisfunction enabledonWebConfiguration. 3. Makethewaterproofslidingcoverwellinstalled. 4. ConnectPowercordtopoweroutlet. 5. ConnectotherendofPowercordtoPoEAdapterof24V/1A. 6. PoEport:ConnectotherendofMainEthernetporttoPoEAdapter. 7. LANport:ConnectEthernetcablefromPoEAdaptertoyourcomputer/laptopforWeb configuration. 8. Resetbutton:ItallowsusertoremotelyresetthesystemofLP2596K. 14 Note. 1.Thereisnosoftwaredriverorutilityinstallationneeded. 2.RJ458P8CEthernetcableisrequired. 3.Ittakesabout60secondstocompletethebootupsequenceafterLP2596Kpoweredup. 2.3IPSurveillance ExampleScenarioforIPsurveillance ThefollowingfigureindicatesthebasicsetuptoimplementIPsurveillancewithapairofLP 2596K.TheremotemonitoringimagecanbedeliveredtolocalNVRviathehighpowered,long distancetransmissionbyLP2596K. 15 16 3.SoftwareConfiguration 3.1SystemRequirements
- MicrosoftWindowsXP/Vista/7/8,MaciOS,Linux
- AWebBrowsersupportsHTTPsuchasInternetExplorer,GoogleChrome,Safari,andMozilla Firefoxetc. 3.2EasyInstallation NetworkConnectionSetup:
ThedefaultIPofLP2596Kis192.168.1.200.Youhavetomakesureyourcomputerisonthe samenetworksegmentasLP2596KbeforeconnectingtoLP2596KConfiguration. Example:IntheWindows7operatingsystem 1. PressStartandenterncpa.cplinsearchbar.Youwillseenetworkconnectionpage. 2. SelectyournetworkinterfacecardandRightclicktosetProperties. 3. DoubleclickInternetProtocolVersion4(TCP/IPv4). 4. SelectSpecifyanIPaddressandentertheIPaddress. IPAddress:192.168.1.x(xcanbeanynumberbetween1to254exceptfor200) SubnetMask:255.255.255.0 DefaultGateway:192.168.1.200 5. ClickOKtocompletetheIPsetting. 17 3.3GetstartedwithLP2596K 1. OpenWebbrowserandenter192.168.1.200intheURLfieldofWebbrowser. 2. Enteradminasdefaultusername,andadminasdefaultpassword. Aftersuccessfullogin,youcanseetheLoopcommwebpage. 18 4.SoftwareFeatures 4.1OperationMode InOperationModeyouwillfindwirelessandWANsettings.TheLP2596Kwirelesssettingsare dependentonthewirelessoperationmodeyouchoose.Toaccesswirelesssettings,clickonthe Setupbutton.InOperationModethereare6types,theyare 4.1.1AccessPoint ItConnectstoaninternalnetwork(LAN)andbroadcastsawirelessnetworkconnection
(WLAN).WhenoperatingintheAccessPointmode,LP2596Kbecomesthecenterhubof thewirelessnetwork.Allwirelesscardsandclientsconnectandcommunicatethroughthe device. 19 Note:Dependingonthemodeyouchoose,applicablesettingswillbeenabled/disabled automatically. Presssetup,thenbelowScreenisdisplayed. PressOKtocontinue,thenbelowpageisdisplayed. Note:InOperationmodetheAProuterssecondaryportwillbeWANPortbydefault. Fields NetworkSSID EnableWireless DisableSSIDBroadcasting EnableIsolated Description Itisthewirelessnetworkname.UsercanusethedefaultSSIDorchangeit.
(Specialcharacterscannotbeused). EnableWirelessOption SSIDwillbehidden,onlyuserswhoknowtheSSIDcanassociatewiththisnetwork. UsercannotPing. 20 RadioMode Channel DataRate TransmitPower TransmitDistance TDMA DFSControl SelecttheModeof5G11NAHT20or5G11NAHT40 Autooptionselectsthemodebyitself. Selectthewirelesscommunicationfrequency/channelfrompulldownmenu. Definesthedatarate(inMbps)atwhichthedeviceshouldtransmitwireless packets.YoucanfixaspecificdataratebetweenMCS0andMCS7(orMCS15for 2x2chaindevices). Definesthemaximumaveragetransmitoutputpower(indBm)ofthedevice.The transmitpowerlevelmaximumislimitedaccordingtocountryregulations. ChangingthedistancevaluewillchangetheACK(Acknowledgement)timeoutvalue accordingly,soitmeansthedistanceshouldbesetasrealdistancebetweenLP 2596Kandotherdeviceforaccuratetransmissionperformance. TimeDivisionMultipleAccess.Enable/Disablethefunctiontoaccess.
(DynamicFrequencySelection)Enablethefeaturetoaccess. SaveandRestart Itsavesthenewsettingsandrestarts. SecuritySettings Securitysettingsallowyoutouseencryptiontosecureyourdata. Thereare4EncryptionModesinSecuritySettings.TheyareWEP,WPA,WPA2,andWPAMixed. FunctionsaresameforallModes,belowexampleisforWEPandWPAEncryption. Fields SelectEncryption Authentication Description SelecttheEncryptionModefromthepulldownmenu. OpenSystem:Opensystemauthenticationprovidesidentificationforusingthe wirelessadapter'sMACaddress.Opensystemauthenticationisusedwhenno authenticationisrequired. SharedKey:Itverifiesthatanauthenticationinitiatingstationhasknowledgeofa sharedsecret.The802.11standardcurrentlyassumesthatthesharedsecretis deliveredtotheparticipatingwirelessclientsbymeansofamoresecurechannelthat isindependentofIEEE802.11. Auto:Autoisthedefaultauthenticationalgorithm.Itwillchangeitsauthentication typeautomaticallytofulfillclientsrequirement. KeyLength KeyFormat SelecttheKeylength WhenKeyLengthisselectedas64bitesthenInputASCII(5Characters)orHex(10 Characters) 21 EncryptionKey WhenKeyLengthisselectedas128bitsthenInputASCII(13Characters)orHex(128 Character) UsercanenterthecharactersbasedonselectedKeyLength&KeyFormat.The formatcanbepassphraseorcharacters. Fields SelectEncryption Description SelecttheEncryptionModefromthepulldownmenu. PreAuthentication SelectPreAuthenticationasPersonalorEnterprise. EncryptionType TKIP:TemporalKeyIntegrityProtocol(TKIP)fordataEncryption.TKIPutilizesa strongerencryptionmethodandincorporatesMessageIntegrityCode(MIC)toprovide protectionagainsthackers. AES:AdvancedEncryptionStandard(AES)fordataencryption.AESutilizedasymmetric 128bitblockdataencryption. AUTO:AutoisthedefaultEncryptionType.Itwillchangeautomaticallytofulfillclients requirement. PresharedKey UsercanenterMaximumnumberofKeyLength.Theformatcanbepassphraseorany characters. 22 Fields RADIUServerIPAddress Description EntertheRADIUServersIPAddressprovidedbyyourISP. RADIUServerPort EntertheRADIUSServersportnumberprovidedbyyourISP. RADIUServerPassword EntertheRADIUSServersPasswordprovidedbyyourISP. EAPReauthorization Period RSNReauthorization EAPSessiontimeoutintervalfor802.1xreauthorizationsetting.Sessiontimeout intervalunitisseconds Enable/Disablethefunctiontoaccess. WPAGroupRekeyInterval Agroupkeyisusedformulticast/broadcastdata,andtherekeyintervalistime periodthatthesystemwillchangethegroupkeyperiodically.Theshorterthe intervalis,thebetterthesecurity.itvariesfrom300to3600Seconds. Save Cancel AdvancedSettings ClickSavetochangethenewsettings. Clickcanceltocleartheenteredsettings. Fields RTS/CTSThreshold BeaconInterval Description Determinesthepacketsizeofatransmissionand,throughtheuseofanAP, helpscontroltrafficflow.Therangeis02347bytes. BeaconsarethepacketssendingbyAccesspointtosynchronizethewireless network.Thebeaconintervalisthetimeintervalbetweenbeaconssendingby thisunitinAPorAP+WDSoperation.Thedefaultandrecommendedbeacon intervalis100milliseconds. 23 DTIM FragmentSize ShortGI(GuardInterval) Aggregation ThisistheDeliveryTrafficIndicationMap.Itisusedtoalerttheclientsthat multicastandbroadcastpacketsbufferedattheAPwillbetransmitted immediatelyafterthetransmissionofthisbeaconframe.Youcanchangethe valuefrom1to255.TheAPwillcheckthebuffereddataaccordingtothis value.Forexample,selecting1meanstocheckthebuffereddataatevery beacon. Alargedataframeisfragmentedintoseveralfragmentseachofsizeequalto fragmentthreshold.Bytuningthefragmentthresholdvalue,wecanget varyingfragmentsizes. AGIisaperiodoftimebetweensymboltransmissionthatallowsreflections
(frommultipath)fromthepreviousdatatransmissiontosettlebefore transmittinganewsymbol.The802.11ndraftspecifiestwoguardintervals:
400ns(short)and800ns(long).Supportofthe400nsGIisoptionalfortransmit andreceive.Thepurposeofaguardintervalistointroduceimmunityto propagationdelays,echoes,andreflectionstowhichdigitaldataisnormally verysensitive. Apartofthe802.11nstandardthatallowssendingmultipleframespersingle accesstothemediumbycombiningframestogetherintoonelargerframe.It createsthelargerframebycombiningsmallerframeswiththesamephysical source,destinationendpoints,andtrafficclass(QoS)intoonelargeframewith acommonMACheader AggregatedFramesNumber Determinesthenumberofframescombinedinthenewlargerframe. MaximumAggregatedSize Determinesthesize(inbytes)ofthelargerframe. Tx/RxChainMask WMMCapable WMMConfiguration Save Cancel Displaysthenumberofindependentspatialdatastreamsthedeviceis transmitting(TX)andreceiving(RX)simultaneouslywithinonespectralchannel ofbandwidth.Multiplechainsincreasedatatransferperformancesignificantly. WiFiMultimedia Enablethefeaturetoaccess DisplaystheWMMParametersofstationandAccessPoint Savethechangedsettings Canceltheselectedsettings 24 AccessControl This page allows administrator to have Access Control by entering MAC address of client stations.WhenthisfunctionisEnabled,MACaddresscanbeaddedintoaccesscontrollistand only those clients whose wireless MAC address are in the access control list will be able to connectordisconnecttheinternet. Fields Description WirelessAccessControl Mode MacAddress TheSelectionsare:
Disable:DisablethewirelessACLfeature. AllowListed:Whenthisoptionisselected,nowirelessclientsexceptthosewhose MACaddressesareinthecurrentaccesscontrollistwillbeabletoconnectto internet. DenyListed:Whenthisoptionisselected,allwirelessclientsexceptthosewhose MACaddressesareinthecurrentaccesscontrollistwillnotbeabletoconnectto internet. EnterclientMACaddressandpressApplyChangesbuttontoaddclientMAC addressintocurrentaccesscontrollist. Comment MakeacommentforWirelessaccesscontrol. FunctionbuttonsfortheAccessControlList:
ApplyChanges ClicktoaddthisentryintotheAccessControlList. TheAccessControlListliststheclientMACaddresses.AnywirelessclientwithitsMACaddress listedinthisaccesscontrollistwillbeabletoconnecttothedevice.Youcanselecttheentries attheSelectcolumnandapplytothefollowingfunctionbuttons. DeleteSelected:Deletetheselectedentriesfromthelist. DeleteAll:Flushthelist. 25 Reset:Clearthesettings. BandwidthControl BandwidthcontrolsthetransmissionspeedofIPaddressandMACaddress.Routercanuse bandwidthcontroltolimittheInternetconnectionspeedofIPaddressorMACaddress. Fields QualityofService Type LocalIPAddress MACAddress UplinkBandwidth(Kbps) DownlinkBandwidth(Kbps) Comment Add Cancel Description Enable/Disablethefunction ThetwotypeoptionsareIPAddressandMacaddress IfyouselectIPAddressTypethenEntertheIPAddressofthedevice/PC connectedtotherouter. IfyouselectMACAddressTypethenEntertheMACAddressofthedevice/PC connectedtotherouter. Enterthelimitforuplinkbandwidth Enterthelimitfordownlinkbandwidth MakeacommentforBandwidthControl ClickAddtochangethenewsettings. Clickcanceltocleartheenteredsettings. 26 4.1.2Client Itactsasawirelessclient,toconnectaremotesegmenttoanexistingWLAN Note:Dependingonthemodeyouchoose,applicablesettingswillbeenabled/disabled automatically. Presssetup,thenbelowScreenisdisplayed. PressOKtocontinue,thenbelowpageisdisplayed. 27 Fields RemoteAPSSID EnableWireless DisableSSIDBroadcasting EnableIsolated LocktoAPMac RadioMode Channel DataRate TransmitPower Description SelectSiteSurveyoptionthenitwillScan&displaystheSSIDList,ChooseoneSSID fromthelist. EnableWirelessOption SSIDwillbehidden,onlyuserswhoknowtheSSIDcanassociatewiththisnetwork. UsercannotPing. EnterMACaddressoftheaccesspointtowhichtheclientwillbelocked&
connected. SelecttheModeof5G11NAHT20or5G11NAHT40 Autooptionselectsthemodebyitself. Selectthewirelesscommunicationfrequency/channelfrompulldownmenu. Definesthedatarate(inMbps)atwhichthedeviceshouldtransmitwireless packets.YoucanfixaspecificdataratebetweenMCS0andMCS7(orMCS15for 2x2chaindevices). Definesthemaximumaveragetransmitoutputpower(indBm)ofthedevice.The transmitpowerlevelmaximumislimitedaccordingtocountryregulations. 28 ChangingthedistancevaluewillchangetheACK(Acknowledgement)timeoutvalue accordingly,soitmeansthedistanceshouldbesetasrealdistancebetweenLP 2596Kandotherdeviceforaccuratetransmissionperformance.
(DynamicFrequencySelection)Enablethefeaturetoaccess. Itsavesthenewsettingsandrestarts. TransmitDistance DFSControl SaveandRestart SiteSurvey YoucouldconfigureAPClientparametershere. ClickRescantobrowsemorenetworksthenselecttheSSIDandpressassociatethenclosethe page. Note:EntertheSSIDPassword,ifnecessary. SecuritySettings Securitysettingsallowyoutouseencryptiontosecureyourdata. Thereare4EncryptionModesinSecuritySettings.TheyareWEP,WPA,WPA2,andWPAMixed. FunctionsaresameforallModes,belowexampleisforWEPandWPAEncryption. 29 Fields SelectEncryption Authentication KeyLength KeyFormat EncryptionKey Description SelecttheEncryptionModefromthepulldownmenu. OpenSystem:Opensystemauthenticationprovidesidentificationforusingthe wirelessadapter'sMACaddress.Opensystemauthenticationisusedwhenno authenticationisrequired. SharedKey:Itverifiesthatanauthenticationinitiatingstationhasknowledgeofa sharedsecret.The802.11standardcurrentlyassumesthatthesharedsecretis deliveredtotheparticipatingwirelessclientsbymeansofamoresecurechannelthat isindependentofIEEE802.11. Auto:Autoisthedefaultauthenticationalgorithm.Itwillchangeitsauthentication typeautomaticallytofulfillclientsrequirement. SelecttheKeylength WhenKeyLengthisselectedas64bitesthenInputASCII(5Characters)orHex(10 Characters) WhenKeyLengthisselectedas128bitsthenInputASCII(13Characters)orHex(128 Character) UsercanenterthecharactersbasedonselectedKeyLength&KeyFormat.The formatcanbepassphraseorcharacters. Fields SelectEncryption Description SelecttheEncryptionModefromthepulldownmenu. PreAuthentication SelectPreAuthenticationasPersonalorEnterprise. 30 EncryptionType PresharedKey TKIP:TemporalKeyIntegrityProtocol(TKIP)fordataEncryption.TKIPutilizesa strongerencryptionmethodandincorporatesMessageIntegrityCode(MIC)toprovide protectionagainsthackers. AES:AdvancedEncryptionStandard(AES)fordataencryption.AESutilizedasymmetric 128bitblockdataencryption. AUTO:AutoisthedefaultEncryptionType.Itwillchangeautomaticallytofulfillclients requirement. UsercanenterMaximumnumberofKeyLength.Theformatcanbepassphraseorany characters. Fields RADIUServerIPAddress Description EntertheRADIUServersIPAddressprovidedbyyourISP. RADIUServerPort EntertheRADIUSServersportnumberprovidedbyyourISP. RADIUServerPassword EntertheRADIUSServersPasswordprovidedbyyourISP. EAPReauthorization Period EAPSessiontimeoutintervalfor802.1xreauthorizationsetting.Sessiontimeout intervalunitisseconds. RSNReauthorization Enable/Disablethefunctiontoaccess. WPAGroupRekeyInterval Save Cancel Agroupkeyisusedformulticast/broadcastdata,andtherekeyintervalistime periodthatthesystemwillchangethegroupkeyperiodically.Theshorterthe intervalis,thebetterthesecurity.itvariesfrom300to3600Seconds. ClickSavetochangethenewsettings. Clickcanceltocleartheenteredsettings. 31 AdvancedSettings Fields RTS/CTSThreshold BeaconInterval Description Determinesthepacketsizeofatransmissionand,throughtheuseofanAP, helpscontroltrafficflow.Therangeis02347bytes. BeaconsarethepacketssendingbyAccesspointtosynchronizethewireless network.Thebeaconintervalisthetimeintervalbetweenbeaconssendingby thisunitinAPorAP+WDSoperation.Thedefaultandrecommendedbeacon intervalis100milliseconds. 32 DTIM(DeliveryTraffic IndicationMap) FragmentSize ShortGI(GuardInterval) Aggregation ThisistheDeliveryTrafficIndicationMap.Itisusedtoalerttheclientsthat multicastandbroadcastpacketsbufferedattheAPwillbetransmitted immediatelyafterthetransmissionofthisbeaconframe.Youcanchangethe valuefrom1to255.TheAPwillcheckthebuffereddataaccordingtothis value.Forexample,selecting1meanstocheckthebuffereddataatevery beacon. Alargedataframeisfragmentedintoseveralfragmentseachofsizeequalto fragmentthreshold.Bytuningthefragmentthresholdvalue,wecanget varyingfragmentsizes. AGIisaperiodoftimebetweensymboltransmissionthatallowsreflections
(frommultipath)fromthepreviousdatatransmissiontosettlebefore transmittinganewsymbol.The802.11ndraftspecifiestwoguardintervals:
400ns(short)and800ns(long).Supportofthe400nsGIisoptionalfortransmit andreceive.Thepurposeofaguardintervalistointroduceimmunityto propagationdelays,echoes,andreflectionstowhichdigitaldataisnormally verysensitive. Apartofthe802.11nstandardthatallowssendingmultipleframespersingle accesstothemediumbycombiningframestogetherintoonelargerframe.It createsthelargerframebycombiningsmallerframeswith thesamephysicalsource,destinationendpoints,andtrafficclass(QoS)into onelargeframewithacommonMACheader AggregatedFramesNumber Determinesthenumberofframescombinedinthenewlargerframe. MaximumAggregatedSize Determinesthesize(inbytes)ofthelargerframe. Tx/RxChainMask WMMCapable Displaysthenumberofindependentspatialdatastreamsthedeviceis transmitting(TX)andreceiving(RX)simultaneouslywithinonespectralchannel ofbandwidth.Multiplechainsincreasedatatransferperformancesignificantly. EnablethefeaturetoaccessorDisableit. WMMConfiguration DisplaystheWMMParametersofstationandAccessPoint Save Cancel Savethechangedsettings Canceltheselectedsettings 33 AccessControl This page allows administrator to have Access Control by entering MAC address of client stations.WhenthisfunctionisEnabled,MACaddresscanbeaddedintoaccesscontrollistand only those clients whose wireless MAC address are in the access control list will be able to connectordisconnecttheinternet. Fields Description WirelessAccessControlMode MacAddress TheSelectionsare:
Disable:DisablethewirelessACLfeature. AllowListed:Whenthisoptionisselected,nowirelessclientsexceptthose whoseMACaddressesareinthecurrentaccesscontrollistwillbeableto connecttointernet. DenyListed:Whenthisoptionisselected,allwirelessclientsexceptthose whoseMACaddressesareinthecurrentaccesscontrollistwillnotbeableto connecttointernet. EnterclientMACaddressandpressApplyChangesbuttontoaddclientMAC addressintocurrentaccesscontrollist. Comment MakeacommentforWirelessaccesscontrol FunctionbuttonsfortheAccessControlList:
ApplyChanges ClicktoaddthisentryintotheAccessControlList. TheAccessControlListliststheclientMACaddresses.AnywirelessclientwithitsMACaddress listedinthisaccesscontrollistwillbeabletoconnecttothedevice.Youcanselecttheentries attheSelectcolumnandapplytothefollowingfunctionbuttons. DeleteSelected:Deletetheselectedentriesfromthelist. DeleteAll:Flushthelist. Reset:Clearthesettings. 34 4.1.3WDSAccessPoint ItactsasthemainbasestationforaWirelessDistributionSystemmeshnetwork Note:Dependingonthemodeyouchoose,applicablesettingswillbeenabled/disabled automatically. Presssetup,thenbelowScreenisdisplayed. PressOKtocontinue,thenbelowpageisdisplayed. 35 Fields NetworkSSID EnableWireless DisableSSIDBroadcasting EnableIsolated RadioMode Channel DataRate TransmitPower TransmitDistance Description Itisthewirelessnetworkname.UsercanusethedefaultSSIDorchangeit.(Special characterscannotbeused). EnableWirelessOption SSIDwillbehidden,onlyuserswhoknowtheSSIDcanassociatewiththisnetwork. UsercannotPing. SelecttheModeof5G11NAHT20or5G11NAHT40 Autooptionselectsthemodebyitself. Selectthewirelesscommunicationfrequency/channelfrompulldownmenu. Definesthedatarate(inMbps)atwhichthedeviceshouldtransmitwireless packets.YoucanfixaspecificdataratebetweenMCS0andMCS7(orMCS15for 2x2chaindevices). Definesthemaximumaveragetransmitoutputpower(indBm)ofthedevice.The transmitpowerlevelmaximumislimitedaccordingtocountryregulations. ChangingthedistancevaluewillchangetheACK(Acknowledgement)timeoutvalue accordingly,soitmeansthedistanceshouldbesetasrealdistancebetweenLP 2596Kandotherdeviceforaccuratetransmissionperformance. DFSControl
(DynamicFrequencySelection)Enablethefeaturetoaccess. SaveandRestart Itsavesthenewsettingsandrestarts. SecuritySettings Securitysettingsallowyoutouseencryptiontosecureyourdata. Thereare4EncryptionModesinSecuritySettings.TheyareWEP,WPA,WPA2,andWPAMixed. 36 FunctionsaresameforallModes,belowexampleisforWEPandWPAEncryption. Fields SelectEncryption Authentication KeyLength KeyFormat EncryptionKey Description SelecttheEncryptionModefromthepulldownmenu. OpenSystem:Opensystemauthenticationprovidesidentificationforusingthe wirelessadapter'sMACaddress.Opensystemauthenticationisusedwhenno authenticationisrequired. SharedKey:Itverifiesthatanauthenticationinitiatingstationhasknowledgeofa sharedsecret.The802.11standardcurrentlyassumesthatthesharedsecretis deliveredtotheparticipatingwirelessclientsbymeansofamoresecurechannelthat isindependentofIEEE802.11. Auto:Autoisthedefaultauthenticationalgorithm.Itwillchangeitsauthentication typeautomaticallytofulfillclientsrequirement. SelecttheKeylength WhenKeyLengthisselectedas64bitesthenInputASCII(5Characters)orHex(10 Characters) WhenKeyLengthisselectedas128bitsthenInputASCII(13Characters)orHex(128 Character) UsercanenterthecharactersbasedonselectedKeyLength&KeyFormat.The formatcanbepassphraseorcharacters. Fields SelectEncryption PreAuthentication Description SelecttheEncryptionModefromthepulldownmenu. SelectPreAuthenticationasPersonalorEnterprise. 37 EncryptionType PresharedKey TKIP:TemporalKeyIntegrityProtocol(TKIP)fordataEncryption.TKIPutilizesa strongerencryptionmethodandincorporatesMessageIntegrityCode(MIC)toprovide protectionagainsthackers. AES:AdvancedEncryptionStandard(AES)fordataencryption.AESutilizedasymmetric 128bitblockdataencryption. AUTO:AutoisthedefaultEncryptionType.Itwillchangeautomaticallytofulfillclients requirement. UsercanenterMaximumnumberofKeyLength.Theformatcanbepassphraseorany characters. Fields RADIUServerIPAddress Description EntertheRADIUServersIPAddressprovidedbyyourISP. RADIUServerPort EntertheRADIUSServersportnumberprovidedbyyourISP. RADIUServerPassword EntertheRADIUSServersPasswordprovidedbyyourISP. EAPReauthorization Period RSNReauthorization EAPSessiontimeoutintervalfor802.1xreauthorizationsetting.Sessiontimeout intervalunitisseconds. Enable/Disablethefunctiontoaccess. WPAGroupRekeyInterval Agroupkeyisusedformulticast/broadcastdata,andtherekeyintervalistime periodthatthesystemwillchangethegroupkeyperiodically.Theshorterthe intervalis,betterthesecurity.Itvariesfrom300to3600Seconds. Save Cancel ClickSavetochangethenewsettings. Clickcanceltocleartheenteredsettings. AdvancedSettings 38 Fields RTS/CTSThreshold BeaconInterval DTIM(DeliveryTraffic IndicationMap) FragmentSize ShortGI(GuardInterval) Description Determinesthepacketsizeofatransmissionand,throughtheuseofanAP, helpscontroltrafficflow.Therangeis02347bytes. BeaconsarethepacketssendingbyAccesspointtosynchronizethewireless network.Thebeaconintervalisthetimeintervalbetweenbeaconssendingby thisunitinAPorAP+WDSoperation.Thedefaultandrecommendedbeacon intervalis100milliseconds. ThisistheDeliveryTrafficIndicationMap.Itisusedtoalerttheclientsthat multicastandbroadcastpacketsbufferedattheAPwillbetransmitted immediatelyafterthetransmissionofthisbeaconframe.Youcanchangethe valuefrom1to255.TheAPwillcheckthebuffereddataaccordingtothis value.Forexample,selecting1meanstocheckthebuffereddataatevery beacon. Alargedataframeisfragmentedintoseveralfragmentseachofsizeequalto fragmentthreshold.Bytuningthefragmentthresholdvalue,wecanget varyingfragmentsizes. AGIisaperiodoftimebetweensymboltransmissionthatallowsreflections
(frommultipath)fromthepreviousdatatransmissiontosettlebefore transmittinganewsymbol.The802.11ndraftspecifiestwoguardintervals:
400ns(short)and800ns(long).Supportofthe400nsGIisoptionalfortransmit andreceive.Thepurposeofaguardintervalistointroduceimmunityto propagationdelays,echoes,andreflectionstowhichdigitaldataisnormally verysensitive. 39 Aggregation Apartofthe802.11nstandardthatallowssendingmultipleframespersingle accesstothemediumbycombiningframestogetherintoonelargerframe.It createsthelargerframebycombiningsmallerframeswith thesamephysicalsource,destinationendpoints,andtrafficclass(QoS)into onelargeframewithacommonMACheader AggregatedFramesNumber Determinesthenumberofframescombinedinthenewlargerframe. MaximumAggregatedSize Determinesthesize(inbytes)ofthelargerframe. Tx/RxChainMask Displaysthenumberofindependentspatialdatastreamsthedeviceis transmitting(TX)andreceiving(RX)simultaneouslywithinonespectralchannel ofbandwidth.Multiplechainsincreasedatatransferperformancesignificantly. WMMCapable EnablethefeaturetoaccessorDisableit. WMMConfiguration DisplaystheWMMParametersofstationandAccessPoint. Save Cancel Savethechangedsettings Canceltheselectedsettings. 40 AccessControl This page allows administrator to have Access Control by entering MAC address of client stations.WhenthisfunctionisEnabled,MACaddresscanbeaddedintoaccesscontrollistand only those clients whose wireless MAC address are in the access control list will be able to connectordisconnecttheinternet. Fields Description WirelessAccessControlMode MacAddress TheSelectionsare:
Disable:DisablethewirelessACLfeature. AllowListed:Whenthisoptionisselected,nowirelessclientsexceptthose whoseMACaddressesareinthecurrentaccesscontrollistwillbeableto connecttointernet. DenyListed:Whenthisoptionisselected,allwirelessclientsexceptthose whoseMACaddressesareinthecurrentaccesscontrollistwillnotbeableto connectinternet. EnterclientMACaddressandpressApplyChangesbuttontoaddclientMAC addressintocurrentaccesscontrollist. Comment MakeacommentforWirelessaccesscontrol FunctionbuttonsfortheAccessControlList:
ApplyChanges ClicktoaddthisentryintotheAccessControlList. TheAccessControlListliststheclientMACaddresses.AnywirelessclientwithitsMACaddress listedinthisaccesscontrollistwillbeabletoconnecttothedevice.Youcanselecttheentries attheSelectcolumnandapplytothefollowingfunctionbuttons. DeleteSelected:Deletetheselectedentriesfromthelist. DeleteAll:Flushthelist. Reset:Clearthesettings. 41 BandwidthControl BandwidthcontrolsthetransmissionspeedofIPaddressandMACaddress.Routercanuse bandwidthcontroltolimittheInternetconnectionspeedofIPaddressorMACaddress. Fields QualityofService Type LocalIPAddress MACAddress UplinkBandwidth(Kbps) DownlinkBandwidth(Kbps) Comment Add Cancel Description Enable/Disablethefunction ThetwotypeoptionsareIPAddressandMacaddress IfyouselectIPAddress,thenEntertheIPAddressofthedevice/PC connectedtotherouter. IfyouselectMACAddress,thenEntertheMACAddressofthe device/PCconnectedtotherouter. Enterthelimitforuplinkbandwidth Enterthelimitfordownlinkbandwidth MakeacommentforBandwidthControl ClickAddtochangethenewsettings. Clickcanceltocleartheenteredsettings. 42 4.1.4WDSClient ItactsasaremotebasestationinaWirelessDistributionSystemmeshnetwork Note:Dependingonthemodeyouchoose,applicablesettingswillbeenabled/disabled automatically. Presssetup,thenbelowScreenisdisplayed. PressOKtocontinue,thenbelowpageisdisplayed. 43 Fields RemoteAPSSID EnableWireless DisableSSIDBroadcasting EnableIsolated LocktoAPMac RadioMode Channel DataRate TransmitPower Description SelectSiteSurveyoptionthenitwillScan&displaystheSSIDList,ChooseoneSSID fromthelist. EnableWirelessOption SSIDwillbehidden,onlyuserswhoknowtheSSIDcanassociatewiththisnetwork. UsercannotPing. EnterMACaddressoftheaccesspointtowhichtheclientwillbelockedand connected. SelecttheModeof5G11NAHT20or5G11NAHT40 Autooptionselectsthemodebyitself. Selectthewirelesscommunicationfrequency/channelfrompulldownmenu. Definesthedatarate(inMbps)atwhichthedeviceshouldtransmitwireless packets.YoucanfixaspecificdataratebetweenMCS0andMCS7(orMCS15for 2x2chaindevices). Definesthemaximumaveragetransmitoutputpower(indBm)ofthedevice.The transmitpowerlevelmaximumislimitedaccordingtocountryregulations. 44 TransmitDistance DFSControl SaveandRestart SiteSurvey ChangingthedistancevaluewillchangetheACK(Acknowledgement)timeoutvalue accordingly,soitmeansthedistanceshouldbesetasrealdistancebetweenLP 2596Kandotherdeviceforaccuratetransmissionperformance.
(DynamicFrequencySelection)Enablethefeaturetoaccess. Itsavesthenewsettingsandrestarts. YoucouldconfigureAPClientparametershere. ClickRescantobrowsemorenetworksthenselecttheSSIDandpressassociatethenclosethe page. Note:EntertheSSIDPassword,ifnecessary. SecuritySettings Securitysettingsallowyoutouseencryptiontosecureyourdata. Thereare4EncryptionModesinSecuritySettings.TheyareWEP,WPA,WPA2,andWPAMixed. FunctionsaresameforallModes,belowexampleisforWEPandWPAEncryption. 45 Fields SelectEncryption Authentication KeyLength KeyFormat EncryptionKey Description SelecttheEncryptionModefromthepulldownmenu. OpenSystem:Opensystemauthenticationprovidesidentificationforusingthe wirelessadapter'sMACaddress.Opensystemauthenticationisusedwhenno authenticationisrequired. SharedKey:Itverifiesthatanauthenticationinitiatingstationhasknowledgeofa sharedsecret.The802.11standardcurrentlyassumesthatthesharedsecretis deliveredtotheparticipatingwirelessclientsbymeansofamoresecurechannelthat isindependentofIEEE802.11. Auto:Autoisthedefaultauthenticationalgorithm.Itwillchangeitsauthentication typeautomaticallytofulfillclientsrequirement. SelecttheKeylength WhenKeyLengthisselectedas64bitesthenInputASCII(5Characters)orHex(10 Characters) WhenKeyLengthisselectedas128bitsthenInputASCII(13Characters)orHex(128 Character) UsercanenterthecharactersbasedonselectedKeyLength&KeyFormat.The formatcanbepassphraseorcharacters. Fields SelectEncryption Description SelecttheEncryptionModefromthepulldownmenu. PreAuthentication SelectPreAuthenticationasPersonalorEnterprise. 46 EncryptionType PresharedKey TKIP:TemporalKeyIntegrityProtocol(TKIP)fordataEncryption.TKIPutilizesa strongerencryptionmethodandincorporatesMessageIntegrityCode(MIC)to provideprotectionagainsthackers. AES:AdvancedEncryptionStandard(AES)fordataencryption.AESutilizeda symmetric128bitblockdataencryption. AUTO:AutoisthedefaultEncryptionType.Itwillchangeautomaticallytofulfill clientsrequirement. UsercanenterMaximumnumberofKeyLength.Theformatcanbepassphraseor anycharacters. Fields RADIUServerIPAddress Description EntertheRADIUServersIPAddressprovidedbyyourISP. RADIUServerPort EntertheRADIUSServersportnumberprovidedbyyourISP. RADIUServerPassword EntertheRADIUSServersPasswordprovidedbyyourISP. EAPReauthorization Period EAPSessiontimeoutintervalfor802.1xreauthorizationsetting.Sessiontimeout intervalunitisseconds RSNReauthorization Enable/Disablethefunctiontoaccess. WPAGroupRekeyInterval Save Cancel Agroupkeyisusedformulticast/broadcastdata,andtherekeyintervalistime periodthatthesystemwillchangethegroupkeyperiodically.Theshorterthe intervalis,betterthesecurity.Itvariesfrom300to3600Seconds. ClickSavetochangethenewsettings. Clickcanceltocleartheenteredsettings. 47 AdvancedSettings Fields RTS/CTSThreshold BeaconInterval DTIM(DeliveryTrafficIndication Map) Description Determinesthepacketsizeofatransmissionand,throughtheuseofan AP,helpscontroltrafficflow.Therangeis02347bytes. BeaconsarethepacketssendingbyAccesspointtosynchronizethe wirelessnetwork.Thebeaconintervalisthetimeintervalbetween beaconssendingbythisunitinAPorAP+WDSoperation.Thedefaultand recommendedbeaconintervalis100milliseconds. ThisistheDeliveryTrafficIndicationMap.Itisusedtoalerttheclientsthat multicastandbroadcastpacketsbufferedattheAPwillbetransmitted immediatelyafterthetransmissionofthisbeaconframe.Youcanchange thevaluefrom1to255.TheAPwillcheckthebuffereddataaccordingto thisvalue.Forexample,selecting1meanstocheckthebuffereddataat everybeacon. 48 FragmentSize ShortGI(GuardInterval) Aggregation Alargedataframeisfragmentedintoseveralfragmentseachofsizeequal tofragmentthreshold.Bytuningthefragmentthresholdvalue,wecanget varyingfragmentsizes. AGIisaperiodoftimebetweensymboltransmissionthatallows reflections(frommultipath)fromthepreviousdatatransmissiontosettle beforetransmittinganewsymbol.The802.11ndraftspecifiestwoguard intervals:400ns(short)and800ns(long).Supportofthe400nsGIis optionalfortransmitandreceive.Thepurposeofaguardintervalisto introduceimmunitytopropagationdelays,echoes,andreflectionsto whichdigitaldataisnormallyverysensitive. Apartofthe802.11nstandardthatallowssendingmultipleframesper singleaccesstothemediumbycombiningframestogetherintoonelarger frame.Itcreatesthelargerframebycombiningsmallerframeswiththe samephysicalsource,destinationendpoints,andtrafficclass(QoS)into onelargeframewithacommonMACheader AggregatedFramesNumber Determinesthenumberofframescombinedinthenewlargerframe. MaximumAggregatedSize Determinesthesize(inbytes)ofthelargerframe. Tx/RxChainMask Displaysthenumberofindependentspatialdatastreamsthedeviceis transmitting(TX)andreceiving(RX)simultaneouslywithinonespectral channelofbandwidth.Multiplechainsincreasedatatransferperformance significantly WMMCapable EnablethefeaturetoaccessorDisableit. WMMConfiguration DisplaystheWMMParametersofstationandAccessPoint Save Cancel Savethechangedsettings Canceltheselectedsettings 49 AccessControl This page allows administrator to have Access Control by entering MAC address of client stations.WhenthisfunctionisEnabled,MACaddresscanbeaddedintoaccesscontrollistand only those clients whose wireless MAC address are in the access control list will be able to connectordisconnecttheinternet. Fields Description WirelessAccessControlMode MacAddress TheSelectionsare:
Disable:DisablethewirelessACLfeature. AllowListed:Whenthisoptionisselected,nowirelessclientsexceptthose whoseMACaddressesareinthecurrentaccesscontrollistwillbeableto connecttointernet. DenyListed:Whenthisoptionisselected,allwirelessclientsexceptthose whoseMACaddressesareinthecurrentaccesscontrollistwillnotbeableto connecttointernet. EnterclientMACaddressandpressApplyChangesbuttontoaddclientMAC addressintocurrentaccesscontrollist. Comment MakeacommentforWirelessaccesscontrol FunctionbuttonsfortheAccessControlList:
ApplyChanges ClicktoaddthisentryintotheAccessControlList. TheAccessControlListliststheclientMACaddresses.AnywirelessclientwithitsMACaddress listedinthisaccesscontrollistwillbeabletoconnecttothedevice.Youcanselecttheentries attheSelectcolumnandapplytothefollowingfunctionbuttons. DeleteSelected:Deletetheselectedentriesfromthelist. DeleteAll:Flushthelist. Reset:Clearthesettings. 50 4.1.5APRouter Itconnectsanexternalnetwork(WAN)withaninternalnetwork(LAN/WLAN),toallow crosscommunication Note:Dependingonthemodeyouchoose,applicablesettingswillbeenabled/disabled automatically. Presssetup,thenbelowScreenisdisplayed. PressOKtocontinue,thenbelowpageisdisplayed. 51 Fields NetworkSSID EnableWireless DisableSSIDBroadcasting EnableIsolated RadioMode Description Itisthewirelessnetworkname.UsercanusethedefaultSSIDorchangeit.
(Specialcharacterscannotbeused). EnableWirelessOption SSIDwillbehidden,onlyuserswhoknowtheSSIDcanassociatewiththisnetwork. UsercannotPing. SelecttheModeof5G11NAHT20or5G11NAHT40 Autooptionselectsthemodebyitself. Channel DataRate TransmitPower TransmitDistance Selectthewirelesscommunicationfrequency/channelfrompulldownmenu. Definesthedatarate(inMbps)atwhichthedeviceshouldtransmitwireless packets.YoucanfixaspecificdataratebetweenMCS0andMCS7(orMCS15for 2x2chaindevices). Definesthemaximumaveragetransmitoutputpower(indBm)ofthedevice.The transmitpowerlevelmaximumislimitedaccordingtocountryregulations. ChangingthedistancevaluewillchangetheACK(Acknowledgement)timeoutvalue accordingly,soitmeansthedistanceshouldbesetasrealdistancebetweenLP 2596Kandotherdeviceforaccuratetransmissionperformance. 52 DFSControl
(DynamicFrequencySelection)Enablethefeaturetoaccess. SaveandRestart Itsavesthenewsettingsandrestarts. SecuritySettings Securitysettingsallowyoutouseencryptiontosecureyourdata. Thereare4EncryptionModesinSecuritySettings.TheyareWEP,WPA,WPA2,andWPAMixed. FunctionsaresameforallModes,belowexampleisforWEPandWPAEncryption. Fields SelectEncryption Authentication KeyLength KeyFormat EncryptionKey Description SelecttheEncryptionModefromthepulldownmenu. OpenSystem:Opensystemauthenticationprovidesidentificationforusingthe wirelessadapter'sMACaddress.Opensystemauthenticationisusedwhenno authenticationisrequired. SharedKey:Itverifiesthatanauthenticationinitiatingstationhasknowledgeofa sharedsecret.The802.11standardcurrentlyassumesthatthesharedsecretis deliveredtotheparticipatingwirelessclientsbymeansofamoresecurechannelthat isindependentofIEEE802.11. Auto:Autoisthedefaultauthenticationalgorithm.Itwillchangeitsauthentication typeautomaticallytofulfillclientsrequirement. SelecttheKeylength WhenKeyLengthisselectedas64bitesthenInputASCII(5Characters)orHex(10 Characters) WhenKeyLengthisselectedas128bitsthenInputASCII(13Characters)orHex(128 Character) UsercanenterthecharactersbasedonselectedKeyLength&KeyFormat.The formatcanbepassphraseorcharacters. 53 Fields SelectEncryption Description SelecttheEncryptionModefromthepulldownmenu. PreAuthentication SelectPreAuthenticationasPersonalorEnterprise. EncryptionType PresharedKey TKIP:TemporalKeyIntegrityProtocol(TKIP)fordataEncryption.TKIPutilizesa strongerencryptionmethodandincorporatesMessageIntegrityCode(MIC)toprovide protectionagainsthackers. AES:AdvancedEncryptionStandard(AES)fordataencryption.AESutilizedasymmetric 128bitblockdataencryption. AUTO:AutoisthedefaultEncryptionType.Itwillchangeautomaticallytofulfillclients requirement. UsercanenterMaximumnumberofKeyLength.Theformatcanbepassphraseorany characters. Fields RADIUServerIPAddress Description EntertheRADIUServersIPAddressprovidedbyyourISP. RADIUServerPort EntertheRADIUSServersportnumberprovidedbyyourISP. RADIUServerPassword EntertheRADIUSServersPasswordprovidedbyyourISP. EAPReauthorization Period RSNReauthorization EAPSessiontimeoutintervalfor802.1xreauthorizationsetting.Sessiontimeout intervalunitisseconds Enable/Disablethefunctiontoaccess. 54 Agroupkeyisusedformulticast/broadcastdata,andtherekeyintervalistime periodthatthesystemwillchangethegroupkeyperiodically.Theshorterthe intervalisbetterthesecurity.Itvariesfrom300to3600Seconds. ClickSavetochangethenewsettings. Clickcanceltocleartheenteredsettings. WPAGroupRekeyInterval Save Cancel AdvancedSettings Fields RTS/CTSThreshold BeaconInterval Description Determinesthepacketsizeofatransmissionand,throughtheuseofan AP,helpscontroltrafficflow.Therangeis02347bytes. BeaconsarethepacketssendingbyAccesspointtosynchronizethe wirelessnetwork.Thebeaconintervalisthetimeintervalbetween beaconssendingbythisunitinAPorAP+WDSoperation.Thedefaultand recommendedbeaconintervalis100milliseconds. 55 DTIM(DeliveryTrafficIndication Map) FragmentSize ShortGI(GuardInterval) Aggregation ThisistheDeliveryTrafficIndicationMap.Itisusedtoalerttheclientsthat multicastandbroadcastpacketsbufferedattheAPwillbetransmitted immediatelyafterthetransmissionofthisbeaconframe.Youcanchange thevaluefrom1to255.TheAPwillcheckthebuffereddataaccordingto thisvalue.Forexample,selecting1meanstocheckthebuffereddataat everybeacon. Alargedataframeisfragmentedintoseveralfragmentseachofsizeequal tofragmentthreshold.Bytuningthefragmentthresholdvalue,wecanget varyingfragmentsizes. AGIisaperiodoftimebetweensymboltransmissionthatallows reflections(frommultipath)fromthepreviousdatatransmissiontosettle beforetransmittinganewsymbol.The802.11ndraftspecifiestwoguard intervals:400ns(short)and800ns(long).Supportofthe400nsGIis optionalfortransmitandreceive.Thepurposeofaguardintervalisto introduceimmunitytopropagationdelays,echoes,andreflectionsto whichdigitaldataisnormallyverysensitive. Apartofthe802.11nstandardthatallowssendingmultipleframesper singleaccesstothemediumbycombiningframestogetherintoonelarger frame.Itcreatesthelargerframebycombiningsmallerframeswiththe samephysicalsource,destinationendpoints,andtrafficclass(QoS)into onelargeframewithacommonMACheader AggregatedFramesNumber Determinesthenumberofframescombinedinthenewlargerframe. MaximumAggregatedSize Determinesthesize(inbytes)ofthelargerframe. Tx/RxChainMask Displaysthenumberofindependentspatialdatastreamsthedeviceis transmitting(TX)andreceiving(RX)simultaneouslywithinonespectral channelofbandwidth.Multiplechainsincreasedatatransferperformance significantly WMMCapable EnablethefeaturetoaccessorDisableit. WMMConfiguration DisplaystheWMMParametersofstationandAccessPoint Save Cancel Savethechangedsettings Canceltheselectedsettings. AccessControl This page allows administrator to have Access Control by entering MAC address of client stations.WhenthisfunctionisEnabled,MACaddresscanbeaddedintoaccesscontrollistand only those clients whose wireless MAC address are in the access control list will be able to connectordisconnecttheinternet. 56 Fields Description WirelessAccessControlMode MacAddress TheSelectionsare:
Disable:DisablethewirelessACLfeature. AllowListed:Whenthisoptionisselected,nowirelessclientsexceptthose whoseMACaddressesareinthecurrentaccesscontrollistwillbeableto connecttointernet. DenyListed:Whenthisoptionisselected,allwirelessclientsexceptthose whoseMACaddressesareinthecurrentaccesscontrollistwillnotbeableto connecttointernet. EnterclientMACaddressandpressApplyChangesbuttontoaddclientMAC addressintocurrentaccesscontrollist. Comment MakeacommentforWirelessaccesscontrol FunctionbuttonsfortheAccessControlList:
ApplyChanges ClicktoaddthisentryintotheAccessControlList. TheAccessControlListliststheclientMACaddresses.AnywirelessclientwithitsMACaddress listedinthisaccesscontrollistwillbeabletoconnecttothedevice.Youcanselecttheentries attheSelectcolumnandapplytothefollowingfunctionbuttons. DeleteSelected:Deletetheselectedentriesfromthelist. DeleteAll:Flushthelist. Reset:Clearthesettings. WANPortSettings TherearethreeoptionsDHCP,StaticMode,PPPoEforInternetconnectiononWANport. DHCP(AutoConfig) 57 Fields WANConnectionType Description SelectDHCPfrompulldownmenu HostName Save Cancel EntertheHostNameofDHCPserver.Thedefaultvalueisempty. ClickSavetochangethenewsettings. Clickcanceltocleartheenteredsettings. StaticMode(fixedIP) Fields WANConnectionType IPAddress IPSubnetMask GatewayIPaddress PrimaryDNSServer Description SelectStaticModefrompulldownmenu. EntertheIPaddress. EnterthesubnetmaskforWANinterface. EnterthedefaultgatewayforWANinterfaceoutgoingdatapackets. EntertheIPaddressofDomainNameServer1. SecondaryDNSServer EntertheIPaddressofDomainNameServer2. Save Cancel PPPoE(ADSL) ClickSavetochangethenewsettings. Clickcanceltocleartheenteredsettings. 58 Fields Description WANconnectionType SelectPPPoEfrompulldownmenu UserName Password VerifyPassword Save:
Cancel IfyouselectthePPPoEsupportonWANinterface,Entertheusernameto loginthePPPoEserverProvidedbyISP IfyouselectthePPPoEsupportonWANinterface,Enterthepasswordtologin thePPPoEserverProvidedbyISP Enterthesamepasswordagainforverification. ClickSavetochangethenewsettings. Clickcanceltocleartheenteredsettings. DynamicDNSSettings TheDynamicDNSfeaturesallowyoutoregisteryourdevicewithaDNSserverandaccessyour deviceeachtimeusingthesamehostname Fields DynamicDNSProvider Description ClickthedropdownmenutopickuptherightDDNSprovideryouregistered. Account Password DDNS Save Cancel EntertheaccountofDDNSyouregistered. PasswordassignedbytheDDNSserviceprovider. Enterthedomainnamethatyouregistered. ClickSavetochangethenewsettings. Clickcanceltocleartheenteredsettings. RemoteManagement 59 Fields RemoteManagement Description SelectEnableorDisableforremotemanagementfunction. PingfromWAN SelectDisableorEnableforPingpermitfromWAN. Save Cancel ClickSavetochangethenewsettings. Clickcanceltocleartheenteredsettings. DHCPServerSettings Fields Description DHCPServer SelectServertoaccessthefeature. LeaseTime From To TheLeaseTimeistheamountoftimethatanetworkuserisallowedtomaintaina networkconnectiontothedeviceusingthecurrentdynamicIPaddress.Attheendofthe LeaseTime,theleaseiseitherrenewedoranewIPisissuedbytheDHCPserver.The amountoftimeisinunitsofseconds.Thedefaultvalueis864000seconds(1day).The value1standsfortheinfinitelease. EnterStartAddressoftheDHCPClientaddressrange. EnterEndAddressoftheDHCPClientaddressrange. ClickSavetochangethenewsettings. Clickcanceltocleartheenteredsettings. Save Cancel DMZSettings YoumaysetupaDeMilitarized(DMZ)toseparateinternalnetworkandinternet. 60 Fields DMZSettings DMZIPAddress Save Cancel Description EnableorDisabletheDMZfunction. TosupportDMZinyourfirewalldesign,EnterIPaddressofDMZhostthatcanbe accessfromtheWANinterface. ClickSavetochangethenewsettings. Clickcanceltocleartheenteredsettings. VirtualServerSettings VirtualserverfeatureallowsuserstomakeserversonyourLANaccessibletointernetusers. Normally,InternetuserswouldnotbeabletoaccessaserveronyourLANbecauseofnative NATprotection.Thevirtualserverfeaturesolvestheseproblemsandallowsinternetusersto connecttoyourservers Fields VirtualServer Protocol IPAddress PortRange Comment Add Cancel Description SelectEnableorDisabletheVirtualServerfunction. Thereare3options,TCP&UDP,TCPorUDP. EntertheIPaddresstowhichthedatapacketscanbeforwardedfromWAN. TheIPaddressshouldbehostedinLANbehindtheNATfirewall. Entertheportrangetowhichdatapacketscanbeforwarded. MakeacommentfortheVirtualServerpolicy. ClickAddtochangethenewsettings. Clickcanceltocleartheenteredsettings. 61 IPFilteringSettings TheIPfilteringfeatureallowsyoutodenyspecificIPaddresswhichcannotconnecttointernet. Fields Filtering Protocol IPAddress Comment Add Cancel Description Enable/DisablethefunctiontoIPFilter Specifyprotocol,TCP&UDP,TCPorUDP. EnterthespecificIPAddresstobedenied. MakeacommentfortheIPFilteringpolicy. ClickAddtochangethenewsettings. Clickcanceltocleartheenteredsettings. 62 PortFilteringSettings ThePortfilteringfeatureallowsyoutodenyspecificPortswhichcannotconnecttointernet. Fields Filtering Protocol PortRange Comment Add Cancel Description Enable/DisablethefunctiontoPortFilter SpecifytheprotocolTCP&UDP,TCPorUDP. EnterthespecificPortrangetobedenied. MakeacommentforthePortFilteringpolicy. ClickAddtochangethenewsettings. Clickcanceltocleartheenteredsettings. MACFilteringSettings TheMACfilteringfeatureallowsyoutodenyMACaddresswhichcannotconnecttointernet. Fields Filtering MacAddress Comment Add Cancel Description SelectEnable/DisabletheMacFilteringfunction. EnterthespecificMACaddresstobedenied. Makeacommentforthefilteringpolicy. ClickAddtochangethenewsettings. Clickcanceltocleartheenteredsettings. 63 BandwidthControl BandwidthcontrolsthetransmissionspeedofIPaddressandMACaddress.Routercanuse bandwidthcontroltolimittheInternetconnectionspeedofIPaddressorMACaddress. Fields QualityofService Type LocalIPAddress MACAddress UplinkBandwidth(Kbps) DownlinkBandwidth(Kbps) Comment Add Cancel Description Enable/Disablethefunction ThetwotypeoptionsareIPAddressandMacaddress IfyouselectIPAddress,thenEntertheIPAddressofthedevice/PC connectedtotherouter. IfyouselectMACAddress,thenEntertheMACAddressofthe device/PCconnectedtotherouter. Enterthelimitforuplinkbandwidth Enterthelimitfordownlinkbandwidth MakeacommentforBandwidthControl ClickAddtochangethenewsettings. Clickcanceltocleartheenteredsettings. 64 4.1.6WirelessISP AWirelessInternetServiceProvider(WISP)isaninternetServiceProviderwithanetwork basedonwirelessnetworking. Note:Dependingonthemodeyouchoose,applicablesettingswillbeenabled/disabled automatically. Presssetup,thenbelowScreenisdisplayed. PressOKtocontinue,thenbelowpageisdisplayed. 65 Fields RemoteAPSSID EnableWireless DisableSSID Broadcasting EnableIsolated RadioMode Channel Description SelectSiteSurveyoptionthenitwillScan&displaystheSSIDList,ChooseoneSSID fromthelist. EnableWirelessOption SSIDwillbehidden,onlyuserswhoknowtheSSIDcanassociatewiththisnetwork. UsercannotPing. SelecttheModeof5G11NAHT20or5G11NAHT40 Autooptionselectsthemodebyitself. Selectthewirelesscommunicationfrequency/channelfrompulldownmenu. 66 DataRate TransmitPower TransmitDistance Definesthedatarate(inMbps)atwhichthedeviceshouldtransmitwireless packets.YoucanfixaspecificdataratebetweenMCS0andMCS7(orMCS15for 2x2chaindevices). Definesthemaximumaveragetransmitoutputpower(indBm)ofthedevice.The transmitpowerlevelmaximumislimitedaccordingtocountryregulations. ChangingthedistancevaluewillchangetheACK(Acknowledgement)timeoutvalue accordingly,soitmeansthedistanceshouldbesetasrealdistancebetweenLP 2596Kandotherdeviceforaccuratetransmissionperformance. DFSControl
(DynamicFrequencySelection)Enablethefeaturetoaccess. SaveandRestart Itsavesthenewsettingsandrestarts. SiteSurvey YoucouldconfigureAPClientparametershere. ClickRescantobrowsemorenetworksthenselecttheSSIDandpressassociatethenclosethe page. Note:EntertheSSIDPassword,ifnecessary. SecuritySettings Securitysettingsallowyoutouseencryptiontosecureyourdata. Thereare4EncryptionModesinSecuritySettings.TheyareWEP,WPA,WPA2,andWPAMixed. FunctionsaresameforallModes,belowexampleisforWEPandWPAEncryption. 67 Fields SelectEncryption Authentication KeyLength KeyFormat EncryptionKey Description SelecttheEncryptionModefromthepulldownmenu. OpenSystem:Opensystemauthenticationprovidesidentificationforusingthe wirelessadapter'sMACaddress.Opensystemauthenticationisusedwhenno authenticationisrequired. SharedKey:Itverifiesthatanauthenticationinitiatingstationhasknowledgeofa sharedsecret.The802.11standardcurrentlyassumesthatthesharedsecretis deliveredtotheparticipatingwirelessclientsbymeansofamoresecurechannelthat isindependentofIEEE802.11. Auto:Autoisthedefaultauthenticationalgorithm.Itwillchangeitsauthentication typeautomaticallytofulfillclientsrequirement. SelecttheKeylength WhenKeyLengthisselectedas64bitesthenInputASCII(5Characters)orHex(10 Characters) WhenKeyLengthisselectedas128bitsthenInputASCII(13Characters)orHex(128 Character) UsercanenterthecharactersbasedonselectedKeyLength&KeyFormat.The formatcanbepassphraseorcharacters. Fields SelectEncryption Description SelecttheEncryptionModefromthepulldownmenu. PreAuthentication SelectPreAuthenticationasPersonalorEnterprise. EncryptionType PresharedKey TKIP:TemporalKeyIntegrityProtocol(TKIP)fordataEncryption.TKIPutilizesa strongerencryptionmethodandincorporatesMessageIntegrityCode(MIC)to provideprotectionagainsthackers. AES:AdvancedEncryptionStandard(AES)fordataencryption.AESutilizeda symmetric128bitblockdataencryption. AUTO:AutoisthedefaultEncryptionType.Itwillchangeautomaticallytofulfill clientsrequirement. UsercanenterMaximumnumberofKeyLength.Theformatcanbepassphraseor anycharacters. 68 Fields RADIUServerIPAddress Description EntertheRADIUServersIPAddressprovidedbyyourISP. RADIUServerPort EntertheRADIUSServersportnumberprovidedbyyourISP. RADIUServerPassword EntertheRADIUSServersPasswordprovidedbyyourISP. EAPReauthorization Period EAPSessiontimeoutintervalfor802.1xreauthorizationsetting.Sessiontimeout intervalunitisseconds RSNReauthorization Enable/Disablethefunctiontoaccess. WPAGroupRekeyInterval Save Cancel Agroupkeyisusedformulticast/broadcastdata,andtherekeyintervalistime periodthatthesystemwillchangethegroupkeyperiodically.Theshorterthe intervalisbetterthesecurity.itvariesfrom300to3600Seconds. ClickSavetochangethenewsettings. Clickcanceltocleartheenteredsettings. 69 AdvancedSettings Fields RTS/CTSThreshold BeaconInterval DTIM(DeliveryTraffic IndicationMap) FragmentSize ShortGI(GuardInterval) Description Determinesthepacketsizeofatransmissionand,throughtheuseofanAP,helps controltrafficflow.Therangeis02347bytes. BeaconsarethepacketssendingbyAccesspointtosynchronizethewireless network.Thebeaconintervalisthetimeintervalbetweenbeaconssendingbythis unitinAPorAP+WDSoperation.Thedefaultandrecommendedbeaconintervalis 100milliseconds. ThisistheDeliveryTrafficIndicationMap.Itisusedtoalerttheclientsthat multicastandbroadcastpacketsbufferedattheAPwillbetransmitted immediatelyafterthetransmissionofthisbeaconframe.Youcanchangethe valuefrom1to255.TheAPwillcheckthebuffereddataaccordingtothisvalue. Forexample,selecting1meanstocheckthebuffereddataateverybeacon. Alargedataframeisfragmentedintoseveralfragmentseachofsizeequalto fragmentthreshold.Bytuningthefragmentthresholdvalue,wecangetvarying fragmentsizes. AGIisaperiodoftimebetweensymboltransmissionthatallowsreflections(from multipath)fromthepreviousdatatransmissiontosettlebeforetransmittinga newsymbol.The802.11ndraftspecifiestwoguardintervals:400ns(short)and 800ns(long).Supportofthe400nsGIisoptionalfortransmitandreceive.The purposeofaguardintervalistointroduceimmunitytopropagationdelays, echoes,andreflectionstowhichdigitaldataisnormallyverysensitive. 70 Aggregation AggregatedFrames Number MaximumAggregatedSize Tx/RxChainMask Apartofthe802.11nstandardthatallowssendingmultipleframespersingle accesstothemediumbycombiningframestogetherintoonelargerframe.It createsthelargerframebycombiningsmallerframeswith thesamephysicalsource,destinationendpoints,andtrafficclass(QoS)intoone largeframewithacommonMACheader Determinesthenumberofframescombinedinthenewlargerframe. Determinesthesize(inbytes)ofthelargerframe. Displaysthenumberofindependentspatialdatastreamsthedeviceis transmitting(TX)andreceiving(RX)simultaneouslywithinonespectralchannelof bandwidth.Multiplechainsincreasedatatransferperformancesignificantly. WMMCapable EnablethefeaturetoaccessorDisableit. WMMConfiguration DisplaystheWMMParametersofstationandAccessPoint Save Cancel Savethechangedsettings Canceltheselectedsettings AccessControl This page allows administrator to have Access Control by entering MAC address of client stations.WhenthisfunctionisEnabled,MACaddresscanbeaddedintoaccesscontrollistand only those clients whose wireless MAC address are in the access control list will be able to connectordisconnecttheinternet. 71 Fields WirelessAccessControlMode MacAddress Description TheSelectionsare:
Disable:DisablethewirelessACLfeature. AllowListed:Whenthisoptionisselected,nowirelessclientsexceptthose whoseMACaddressesareinthecurrentaccesscontrollistwillbeableto connecttointernet. DenyListed:Whenthisoptionisselected,allwirelessclientsexceptthose whoseMACaddressesareinthecurrentaccesscontrollistwillnotbeableto connecttointernet. EnterclientMACaddressandpressApplyChangesbuttontoaddclientMAC addressintocurrentaccesscontrollist. Comment MakeacommentforWirelessaccesscontrol FunctionbuttonsfortheAccessControlList:
ApplyChanges ClicktoaddthisentryintotheAccessControlList. TheAccessControlListliststheclientMACaddresses.AnywirelessclientwithitsMACaddress listedinthisaccesscontrollistwillbeabletoconnecttothedevice.Youcanselecttheentries attheSelectcolumnandapplytothefollowingfunctionbuttons. DeleteSelected:Deletetheselectedentriesfromthelist. DeleteAll:Flushthelist. Reset:Clearthesettings. WANPortSettings TherearethreeoptionsDHCP,StaticMode,PPPOEforInternetconnectiononWANport. DHCP(AutoConfig) Fields WANConnectionType Description SelectDHCPfrompulldownmenu HostName Save Cancel EntertheHostNameofDHCPserver.Thedefaultvalueisempty. ClickSavetochangethenewsettings. Clickcanceltocleartheenteredsettings. 72 StaticMode(fixedIP) Fields WANConnectionType IPAddress IPSubnetMask Description SelectStaticModefrompulldownmenu EntertheIPaddress. EnterthesubnetmaskforWANinterface. GatewayIPaddress EnterthedefaultgatewayforWANinterfaceoutgoingdatapackets. PrimaryDNSServer SecondaryDNSServer EntertheIPaddressofDomainNameServer1. EntertheIPaddressofDomainNameServer2. Save Cancel ClickSavetochangethenewsettings. Clickcanceltocleartheenteredsettings. PPPoE(ADSL) Fields Description WANconnectionType SelectPPPoEfrompulldownmenu UserName Password VerifyPassword Save Cancel IfyouselectthePPPoEsupportonWANinterface,Entertheusernameto loginthePPPoEserverprovidedbyISP. IfyouselectthePPPoEsupportonWANinterface,Enterthepasswordtologin thePPPoEserverprovidedbyISP. Enterthesamepasswordagainforverification. ClickSavetochangethenewsettings. Clickcanceltocleartheenteredsettings. 73 DynamicDNSSettings TheDynamicDNSfeaturesallowyoutoregisteryourdevicewithaDNSserverandaccessyour deviceeachtimeusingthesamehostname Fields DynamicDNSProvider Description ClickthedropdownmenutopickuptherightDDNSprovideryouregistered. Account Password DDNS Save Cancel EntertheaccountofDDNSyouregistered. PasswordassignedbytheDDNSserviceprovider. Enterthedomainnamethatyouregistered. ClickSavetochangethenewsettings. Clickcanceltocleartheenteredsettings. RemoteManagement Fields RemoteManagement Description SelectEnableorDisableforremotemanagementfunction. PingfromWAN SelectDisableorEnableforPingpermitfromWAN. Save Cancel ClickSavetochangethenewsettings. Clickcanceltocleartheenteredsettings. 74 DHCPServerSettings Fields DHCPServer LeaseTime From To Save Cancel Description SelectServertoaccessthefeature TheLeaseTimeistheamountoftimethatanetworkuserisallowedtomaintaina networkconnectiontothedeviceusingthecurrentdynamicIPaddress.Attheendofthe LeaseTime,theleaseiseitherrenewedoranewIPisissuedbytheDHCPserver.The amountoftimeisinunitsofseconds.Thedefaultvalueis864000seconds(1day).The value1standsfortheinfinitelease. EnterStartaddressoftheDHCPClientaddressrange. EnterEndaddressoftheDHCPClientaddressrange. ClickSavetochangethenewsettings. Clickcanceltocleartheenteredsettings. DMZSettings YoumaysetupaDeMilitarized(DMZ)toseparateinternalnetworkandinternet. Fields Description DMZSettings DMZIPAddress EnableorDisabletheDMZfunction. TosupportDMZinyourfirewalldesign,EnterIPaddressofDMZhostthatcanbeaccess fromtheWANinterface. Save Cancel ClickSavetochangethenewsettings. Clickcanceltocleartheenteredsettings. 75 VirtualServerSettings VirtualserverfeatureallowsuserstomakeserversonyourLANaccessibletointernetusers. Normally,InternetuserswouldnotbeabletoaccessaserveronyourLANbecauseofnative NATprotection.Thevirtualserverfeaturesolvestheseproblemsandallowsinternetusersto connecttoyourservers Fields Description VirtualServer SelectEnableorDisabletheVirtualServerfunction. Protocol IPAddress PortRange Comment Add Cancel Thereare3options,TCP&UDP,TCPorUDP. EntertheIPAddresstowhichthedatapacketscanbeforwardedfromWAN.ThisIP addressshouldbehostedinLANbehindtheNATFirewall. Entertheportrangetowhichdatapacketscanbeforwarded. MakeacommentfortheVirtualServerpolicy. ClickAddtochangethenewsettings. Clickcanceltocleartheenteredsettings. IPFilteringSettings TheIPfilteringfeatureallowsyoutodenyspecificIPaddresswhichcannotconnecttointernet. 76 Fields Filtering Protocol IPAddress Comment Add Cancel Description Enable/DisablethefunctiontoIPFilter Specifyprotocol,TCP&UDP,TCPorUDP. EnterthespecificIPAddresstobedenied. MakeacommentfortheIPFilteringpolicy. ClickAddtochangethenewsettings. Clickcanceltocleartheenteredsettings. PortFilteringSettings ThePortfilteringfeatureallowsyoutodenyspecificPortswhichcannotconnecttointernet. Fields Filtering Protocol PortRange Comment Add Cancel Description Enable/DisablethefunctiontoPortFilter SpecifytheprotocolTCP&UDP,TCPorUDP. EnterthespecificPortrangetobedenied. MakeacommentforthePortFilteringpolicy. ClickAddtochangethenewsettings. Clickcanceltocleartheenteredsettings. MACFilteringSettings TheMACfilteringfeatureallowsyoutodenyMACaddresswhichcannotconnecttointernet 77 Fields Filtering Description SelectEnableorDisabletheMacFilteringfunction. MacAddress EnterthespecificMACaddresstobedenied. Comment Add Cancel Makeacommentforthefilteringpolicy. ClickAddtochangethenewsettings. Clickcanceltocleartheenteredsettings. BandwidthControl BandwidthcontrolsthetransmissionspeedofIPaddressandMACaddress.Routercanuse bandwidthcontroltolimittheInternetconnectionspeedofIPaddressorMACaddress. Fields QualityofService Type LocalIPAddress MACAddress UplinkBandwidth(Kbps) DownlinkBandwidth(Kbps) Comment Add:
Cancel:
Description Enable/Disablethefunction ThetwotypeoptionsareIPAddressandMacaddress IfyouselectIPAddress,thenEntertheIPAddressofthedevice/PC connectedtotherouter. IfyouselectMACAddress,thenEntertheMACAddressofthedevice/PC connectedtotherouter. Enterthelimitforuplinkbandwidth Enterthelimitfordownlinkbandwidth MakeacommentforBandwidthControl ClickAddtochangethenewsettings. Clickcanceltocleartheenteredsettings. 78 4.2SystemConfiguration SelecttheSystemConfigurationmenufromthetopofyourscreentoaccessIP.Thesystem configurationincludesDeviceIPSettings,TimeSettings,PasswordSettings,System Management,PingWatchdog,FirmwareUpgrade,ConfigurationSaveandRestore,Factory Default,RebootSystem. 4.2.1DeviceIPSettings AllsettingsbesidesWirelessandWANfunctionsareinthiscategory. Fields IPAddress Description EntertheIPAddressfortheDevice. IPSubnetMask EntertheSubnetMaskas255.255.0.0 GatewayIPAddress EntertheGatewayIPAddressfortheDevice. DNSServer PrimaryDNSServer SecondaryDNSServer TheDomainNameSystem(DNS)isaserverontheInternetthattranslateslogical namessuchaswww.yahoo.comtoIPaddresseslike66.218.71.80.Inordertodo this,aqueryismadebytherequestingdevicetoaDNSservertoprovidethe necessaryinformation.Ifyoursystemadministratorrequiresyoutomanually entertheDNSServeraddresses,youshouldenterthemhere. EnterthePrimaryDNSServer EntertheSecondaryDNSServer Save&Restart Itsavesthesettingsandrestarts. 79 4.2.2TimeSettings SystemConfiguration>TimeSettings Itsynchronizesthedate&timeofPCtodevice.EnableNTP(Networktimeprotocol)forclock synchronizationto device. If NTP is not enabled then user must enter the date and time manually. Fields EnableNTP ServerName Description EnableNTPsothattime&datewillbeupdatedcorrectlyevenafterreboot. EntertheNTPserverName NTPrequestinterval NTPupdatingtimeinterval.Bydefaultits24. LocalTimeZone SelecttheTimezoneofyourcountryfrompulldownmenu. Localdateandtime SyncwithPC Save&Start Enterthemonth,date,year,hours,Minutesandseconds,AM/PMManuallyto setdateandtime. ItSynchronizesthenewsettingsofdateandtimetoyourcomputer. ItSavesthesettingsandstarts. 80 4.2.3PasswordSettings Thissettingshelpstochangepasswordtorestrictfromunauthorizedaccess. Tochangepassword,pleasegotoSystemConfiguration>PasswordSettingsmenu. Fields Description CurrentPassword NewPassword Enterthepasswordofthedevice. Enteryournewpasswordtowhichyouwanttochange. ReenterNewPassword Save&Change Forconfirmation,enterthenewpasswordagain. ItsavesandchangestoNewPassword. 81 4.2.4SystemManagement SystemConfiguration>SystemManagement Inthispage,administratorcanchangethemanagementparametersanddisable/enable managementinterface. Fields DeviceName POEPassThrough UPnP Syslog IGMP Save&Start Description EntertheDeviceName ItallowsSecondaryEthernetporttoprovide24Vpowerforasecondarydevicewhen itsenabled. AdministratorcanenableordisabletheUPnPfunction Thisoptionenablestheregistrationroutineofsystemlog(syslog)messages. InternetGroupManagementProtocol.Enable/disabletheIGMPfunctionforthe multiplebridgedports. Itsavesthesettingsandstarts. 82 4.2.5PingWatchdog SystemConfiguration>PingWatchdog Thismenuallowstoconfiguresystemtorebootonkernelpanic,whenanIPaddressdoesnot respond,orincasethesystemhaslockedup.Softwarewatchdogtimerisusedtoprovidethe lastoption,soinveryrarecases(causedbyhardwaremalfunction)itcanlockupbyitself.There isahardwarewatchdogdeviceavailableinallRouterBOARDPowerPCwhichcanrebootthe systeminanycase. Fields PingWatchdog IPAddress1 Description Enable/Disablethefunctiontoaccess EntertheIPaddresstobepinged. PingFrequency SetthenumberofsecondstobePinged. FailedTries Action Save Enterthenumberofpermittedtimesforthepingtobefailedbeforepowerreboot. Forexample"2"meanstheCPEwillreconnectifthePINGdoesn'trespondfor 120Seconds. IftheremoteIPaddressdoesnotrespondtoPingthedevicewillpowerreboot. Itsavesthechangedsettings. WhenyousetthePingFrequencytoevery"120"secondsandFailTriesto"2".ItmeanstheUser willpingevery120seconds,afterthesecondfailure,itwillreconnect. 83 4.2.6FirmwareUpgrade SystemConfiguration>FirmwareUpgrade Upgradethedevicefirmwaretoobtainnewfunctionality.Ittakesabout1minutetouploadnew version.ClicktheBrowsebuttontoselectthepathandfilenameforthefirmware,andthen clicktheUPGRADEbuttontoupgradefirmware. Note:PleasedonotoffthepowerorremovetheEthernetcableconnectedtoLP2596Kwhen firmwareupgradeisinprocess.Otherwise,itwillprobablycausesystemcrash. Caution!AcorruptedfilewillhanguptheSystem 4.2.7SaveandRestore SystemConfiguration>ConfigurationSaveandRestore Youcansavesystemconfigurationsettingstoafile,andlaterdownloaditbacktotheLP2596K byfollowingthesteps. Save:PressSavebuttontosavethecurrentconfigurationsettingsofthedevicetothe ManagementHostorclicktheBrowsebuttontolocatetheconfigurationfile, 84 Restore:clicktheRESTOREbuttontorestorethesystemconfigurationfromthespecifiedfile. 4.2.8FactoryDefault SystemConfiguration>FactoryDefault ThisFeatureisusedtoresetthecurrentconfigurationsettingtothefactorydefault configurationsettings. ClickYEStogoaheadandrestoretheconfigurationtothefactorydefault. 4.2.9Reboot WheneveryouusetheWebconfigurationtochangesystemsettings,thechangesareinitially placedintemporarystorage.Thesechangeswillbelostifthedeviceisresetorturnoff. IMPORTANT!DonotturnofforpresstheResetbuttonwhilethisprocedureisinprogress. 85 4.3Tools TherearetwofeaturesinToolstheyareNetworkPing&NetworkTraceroute 4.3.1NetworkPing Network Ping is used to provide a basic connectivity test between the requesting host and a destinationhost.ThisisdonebyusingtheInternetControlMessageProtocol(ICMP)whichhas the ability to send an echo packet to a destination host and a mechanism to listen for a response from this host. Simply stated, if the requesting host receives a response from the destination host, this host is reachable. Network Ping is commonly used to provide a basic picture of where a specific networking problem may exist. For example, if an Internet connectionisdownatanoffice,thepingutilitycanbeusedtofigureoutwhethertheproblem existswithintheofficeorwithinthenetworkoftheInternetprovider. Fields DestinationIPAddress Description EntertheIPaddresstobePinged. PingNumber Numberoftimestobepinged. PingPackSize PingDatapacketsize. PingResult Itdisplaystheresult Ping:Clickittostarttoping. Stop:Stoptheping. 86 4.3.2NetworkTraceroute OncetheNetworkPinghasbeenusedtodeterminebasicconnectivity,theNetworktraceroute canusedtodeterminemorespecificinformationaboutthepathtothedestinationhost includingtheroutethepackettakesandtheresponsetimeoftheseintermediatehosts.Ifyou executetheTraceroutecommandonasourcedevice,itsendsIPpacketstowardthedestination withTimeToLive(TTL)valuesthatincrementuptothemaximumspecifiedhopcount.Thisis30 bydefaultonmostsystems. Fields DestinationIPAddress Description EntertheIPaddresstowhichyouliketoknowthetraceroute. MaxHop Result Maximumnumberofroutes. Itdisplaystheresult Traceroute:Clickittotracetheroute. Stop:StoptheTraceroute. 87 4.4DeviceStatus ClickontheDeviceStatusonthetopmenubar, Itisusedtomonitorthestatusofthedevice.Itprovidesinformationondevicestatus,wireless information,LANInformation,wirelessclienttableandsystemlog. 4.4.1DeviceInformation DeviceStatusDeviceInformation ItpresentsthestatusofLP2596KFirmwaredevices,memoryutilizationandARPTable. 88 4.4.2WirelessInformation ThispageshowsthewirelessinformationofLP2596Kdevice,suchascurrentoperationmode, wirelesstraffic,errorpackets,deviceSSID,Band,channel,andencryptionused,TransmitPower. 4.4.3LANInformation ThispageshowstheLANinformationofLP2596Kdevice,suchasPhysicalAddress,IPAddress, NetworkMask,DefaultGatewayandDHCPdetails. 89 4.4.4WirelessClientTable ThisfeaturedisplaysthecurrentlyconnectedMACaddressofWiFiclients 4.4.5SystemLOG Thispageisusedtoviewsystemlogs.TheSystemLogdisplaysthesystemactivities,login,and systemerrorreport. 4.5LOGOUT PleasemakesuretoLogoutafteryoufinishallsettings. 90 5.Compliance FederalCommunicationCommissionInterferenceStatement ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice, pursuanttoPart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotection against harmful interferencein aresidential installation. Thisequipmentgenerates,uses,and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does causeharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturning theequipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneor moreofthefollowingmeasures:
Reorientorrelocatethereceivingantenna. Increasetheseparationbetweentheequipmentandreceiver. Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiveris connected. Consultthedealeroranexperiencedradio/TVtechnicianforhelp. FCCCaution:
ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwo conditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustaccept anyinterferencereceived,includinginterferencethatmaycauseundesiredoperation. RFRadiationExposureandHazardStatement:
To ensure compliance with FCC RF exposure requirements, this device must be installed in a locationsuchthattheantennaofthedevicewillbegreaterthan0.6mawayfromallpersons. Usinghigher gain antennas and types of antennas not covered underthe FCC certificationof thisproductisnotallowed.Installersoftheradioandendusersoftheproductmustadhereto theinstallationinstructionsprovidedinthismanual.Thistransmittermustnotbecolocatedor operatinginconjunctionwithanyotherantennaortransmitter. NonmodificationStatement:
Use only the integral antenna supplied by the manufacturer when operating this device. Unauthorized antennas, modifications, or attachments could damage the TI Navigator access pointandviolateFCCregulations.Anychangesormodificationsnotexpresslyapprovedbythe partyresponsibleforcompliancecouldvoidtheuser'sauthoritytooperatethisequipment. Copyright2014LoopcommTechnologyInc.Allrightsreserved. 91
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2015-06-08 | 5660 ~ 5700 | NII - Unlicensed National Information Infrastructure TX | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2015-06-08
|
||||
1 | Applicant's complete, legal business name |
Loopcomm Technology,.Inc.
|
||||
1 | FCC Registration Number (FRN) |
0023521610
|
||||
1 | Physical Address |
6F., No.236, Bo'ai St., Shulin Dist.
|
||||
1 |
New Taipei City, N/A 23845
|
|||||
1 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
c******@telefication.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
VYT
|
||||
1 | Equipment Product Code |
LP2596KUS
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
J****** L********
|
||||
1 | Title |
vice president
|
||||
1 | Telephone Number |
+886-******** Extension:
|
||||
1 | Fax Number |
+886-********
|
||||
1 |
J******@loopcomm.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Worldwide Testing Services (Taiwan) Co., Ltd.
|
||||
1 | Name |
D******** S********
|
||||
1 | Physical Address |
6F., No.58, Ln. 188, Ruiguang Rd., Neihu Dist.
|
||||
1 |
Taiwan
|
|||||
1 | Telephone Number |
886-2********
|
||||
1 | Fax Number |
886-2********
|
||||
1 |
d******@wts-lab.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
Worldwide Testing Services (Taiwan) Co., Ltd.
|
||||
1 | Name |
M******** C******
|
||||
1 | Physical Address |
6F., No.58, Ln. 188, Ruiguang Rd., Neihu Dist.
|
||||
1 |
Taiwan
|
|||||
1 | Telephone Number |
886-2********
|
||||
1 | Fax Number |
886-2********
|
||||
1 |
m******@wts-lab.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Outdoor Long Range 802.11a/n 5GHz Wi-Fi AP/CPE/Bridge | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Worldwide Testing Services (Taiwan) Co., Ltd.
|
||||
1 | Name |
D******** S******
|
||||
1 | Telephone Number |
886-2******** Extension:
|
||||
1 | Fax Number |
886-2********
|
||||
1 |
d******@wts-lab.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | MO ND | 5260 | 5320 | 0.0093 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15E | MO ND | 5500 | 5580 | 0.0094 | |||||||||||||||||||||||||||||||||||
1 | 3 | 15E | MO ND | 5660 | 5700 | 0.0093 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC