www.lorextechnology.com
+ Upgrade your DVR firmware and mobile app to the latest versions.
+ Please note that an upload speed of 3 Mbps is required for remote video streaming. Up to 3 devices may connect to the system at the same time.
+ Ensure you have completed initial setup of the Lorex Secure app and the DVR as detailed in the Quick Connection Guide. rex Secure: App Overview Homescreen Home eel as Top to view systems, cameras or groups View all channels, Tap the play button ( )) ono channel to view live video. Configure device settings (see the section Lorex Secure: Device Settings for details) anal Side Entrance Top a channel to view live video or configure comera settings. See the image below for channel screen overview. Garden Shed Balcony Channel Screen Return to homescreen Play back recorded video [see the section Lorex Secure: Playback for details) Qate ond time stomp Signal strength Battery life Top to stream live video fram the camera:
Recording indicator:
Disable the selected camera:
Configure device settings [see the section:
Lorex Secure: Device Settings for details}
Tap to capture o snapshot of the current comera image:
Tap to monually record video, then top. again to stop View video in enhanced resolution:
Snapshot LHB800_QRG_EN_RI.indd 1 Quick Reference Guide rex Secure: Playback Play back recorded video using the Lorex Secure app. To play back recorded video:
Launch the Lorex Secure app. Tap the camera you would like to view recordings from. so pe The History screen opens:
* Tap [alto select a date to search for recordings from.
+ Tap Kid (ios) / El (Android) to filter results by type (Motion or Manual recording).
+ Tap one of the event thumbnails to play back the selected event. Playback Controls:
Channel name Return ta History view Start time Top to play or pause video Tap the progress bar to change playback position Icon indicates motion or manual recording It) att g Change your device settings using the Lorex Secure app. To change device settings:
1. Launch the Lorex Secure app. 2 Tap @ next to your wire-free system. Device Name 3. Configure the following as needed:
Current User wir Switch User Gy I ew corvette deve Device Name: Enter a name of your choice for your wire-free security system [e.g., My Wire-
Free System). Update Password:
Switch User: Tap to switch to a different user Kataereremen taaviney for the DVR. Password entry required.
+ Update Password: Tap to change the password Je Recording Length a3 9 of thal cama wa werd oon mation dereston used to log in for the current user.
* Recording Length: Tap to specify how long [in seconds) the selected camera will record video for when mation is detected.
+ Video Resolution: Tap to choose the recording resolution for the selected camera. You may choose 720P or 1080P.
+ Device Time Zone: Tap to change the current time zone. Mobile Notifications: Tap to turn all Notifications on / off {overrides channel settings see the section "Lorex Secure:
Channel Settings below for details).
+ Device Error Notifications: Tap to turn notifications for storage-related issues on / off. ie estan ac rose ay, Device Time Zone so SEC) Setthe cevce vine zor a Mobile Notifications ME piow es denen o send moble rothemane Device Error Notifications
(No Hard Drive Gal cs tocar unable deect ahd ve 4. Tap SAVE to save settings. Lorex Secure: Channel Settings Change settings for a specific channel using the Lorex Secure app. To change device settings:
1 Launch the Lorex Secure app. 2, Tap the channel you wish to configure on the homescreen. 3. Tap o 4. Configure the following as needed:
Channel Name: Enter a name of your choice for the selected channel (e.g., Living Room). Finca aT LOREX
+ Motion Notifications: Tap to turn motion notifications on / off for the selected channel. {Q_ Motion Notifications i oe NOTE: Turning off Mobile Notifications in the Device Settings menu will override notification preferences for individual channels.
* Device Settings: Shortcut to Device Settings menu. See the section Lorex Secure: Device Settings above for details. 5. Tap Save to save settings. LHB800_ORG_EN_RI 7/1/2017 5:48:10 PM DVR: Full Setup The DVR setup detailed in the Quick Connection Guide is a simplified setup. In order ta access features using the DVR interface, you must complete the full setup detailed below. To set up the DVR:
2. Connect the included mouse to the Mouse / Backup USB port. 1. Connect the OVR to your router using the included Ethernet cable. 4. Connect the included power adapter to the DVR. Wait a few minutes for the system to start up. 3. Connect a monitor (not included) to of the DVR with the cable. the HDMI port included HDMI
* During split-screen display mode:
Double-click an individual channel to view it in full-screen. Double-click again to return to the split-screen display mode.
* While navigating menus:
Click to open a menu option. 2. RIGHT-CLIC!
* During live view:
Right-click anywhere on the screen to open the Quick Menu.
* While navigating menus:
Right-click to exit menus. 3. SCROLL WHEEL:
* While navigating menus:
Scroll to move up / down through the menu content. NOTE: In live view, hover the mouse cursor over the top of the screen to open the Navigation Bar. Move the mouse cursor away from the top of the screen to close the Navigation Bar. Fcc Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation:
Le prsent apparel est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
~- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. FCC and IC Radiation Exposure Statement:
This equipment complies with FCC and Canada radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Dclaration dIC sur lexposition aux radiations:
Cet quipement est conforme aux limites d'exposition aux radiations dfinies par le Canada pour des environnements non contrls. Cet metteur ne doit pas tre install au mme endroit ni utilis avec une autre antenne ou un autre metteur. LHB800_QRG_EN Ri.indd 2 DVR: Initial Setup Wizard For users who wish to use the DVR interface rather than connecting to the system using the Lorex Secure app, you will have to complete the DVR Setup Wizard to confirm the correct date and time for the system. To complete the setup wizard:
1. Log in using the system user name (default: admin) and your new, secure password you recorded on the Quick Connection Guide. 2, The Setup Wizard launches. Click Next to begin. 3. Click the arrow keys to select a language for the on-screen display. Click Next to confirm. Click the arrow keys to select your region. Click Next to confirm. 5. Enter the date and time:
Click to select the correct date from the calendar. ov QFLIR Select the correct time zone fram the dropdown. Select a time format fram the dropdown. For 12Hour format, select either AM or PM from the second dropdown. Click Next to confirm, 6. Review the information you have set for the DVR, Click Accept to confirm. DVR: Quick Menu Right-click anywhere on the live viewing screen to open the Quick Menu.
# Main Menu Open Main Menu EE Multi View
#2 Playback DVR: Search and Playback Search for and play back video recordings on the DVR. To play back recorded video:
Select camera / live display view Search for and play back recordings 1. From live view, right-click and then click Playback. 2. Log in using the system user name (default: admin) and your new, secure password you recorded on the Quick Connection Guide. 3. Use the calendar on the left-side of the screen to select the date to playback, Check off the channels you would like to search for recordings from on the left-side of the screen. 5. Click {SY to search for recordings. 6. Search results appear as thumbnails. Double-click any recording to begin video playback, Select the day to playback Double-click any event to begin playback Select:
channels to playback Click to search for recordings LHBBOO_DRG_EN_RI 7/AW2017 5:48:16 PM FCC& IC Radiation Exposure Statement:
This equipment complies with FCC and Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Dclaration d'lC sur I'exposition aux radiations:
Cet quipement est conforme aux limites dexposition aux radiations dfinies par le Canada pour des environnements non contrls. Cet quipement doit tre install et utilis @ une distance minimum de 20 cm entre Fantenne et votre corps. Cet metteur ne doit pas tre install au mme endroit ni utilis avec une autre antenne ou un autre metteur..