FCC ID: UCZ-U471AA-Z 1440p QHD Smart Deterrence Battery Camera

2K QHD Wire-Free Security System Quick Start Guide lorex.com Welcome!

Thanks for your purchase of the 2K QHD Wire-Free Security System. Heres how to get started. Overview Status Indicator Pairing to the App Package Contents Contents 1 2 3 4 5 6 7 8 9 Placing the Camera Camera Live View Troubleshooting Installing the Battery Installing the Camera 1 Package Contents 2 Overview: Camera Front View Back View Wire-Free Camera*

Charging Adapter Charging Cable Battery Pack*

Mounting Bracket*

Anchors (x2)*

Screws (x2)*

Mounting Template* Mounting Plate*

Lorex Home Hub Lorex Home Hub Power Adapter Ethernet Cable Memory card

(pre-inserted)**

Attention: A REGULATED UL / CSA APPROVED power supply is REQUIRED for use with this camera (included). Use of a non-regulated, non-conforming power supply can damage this product and voids the warranty.

*May include one or more, depending on the package purchased.

**See product packaging for memory size details. Warning light Status indicator Microphone Light sensor Motion sensor Speaker Power port Mounting screw thread Pairing button Battery compartment Battery cover Overview: Lorex Home Hub 3 Status Indicator Front View Back View See the table below for definitions of the camera / Lorex Home Hub status indicator:

Status Indicator Speaker Ethernet port Power port MicroSD card slot Pairing

/ reset button For optimal video streaming performance position the Lorex Home Hub centrally to the cameras. Note: Wireless signal strength can be reduced by other devices that emit frequen-

cies or obstacles such as walls, ceilings, brick and other major obstructions. Status Camera Lorex Home Hub Sleep mode Battery needs recharging Waking up Alarm has been triggered N/A Operating correctly Reconnecting to network Ready to connect to network

(flashing rapidly) Ready to pair with the hub N/A Detecting Wi-Fi signal from the hub Ready to pair Factory default successful Factory default successful Disconntected from network Disconnected from network Off

(solid)

(flashing)

(flashing)

(solid)

(flashing)

(alternating) Firmware update in progress Firmware update in progress

(flashing) N/A Alarm has been triggered by camera 4 Pairing to the App Start by powering on the Lorex Home Hub and connecting to the app. 1. If you already have the app, skip this step. Scan the QR code on the right using your mobile devices camera. Install the free Lorex Home app from the App Store or Google Play Store. 2. Tap the Lorex Home icon to launch the app. 3. If you already have an account, skip this step. Tap Sign up, then follow the on screen prompts to create an account. Record your account details below:

7. Choose your preferred connection set up method from Options A or B:

Option A - Wired Connection (preferred method): Choose the wired connection and connect the Lorex Home Hub to your home router using the provided Ethernet cable. If your router is not in a central location in your home, then consider using the wireless option to ensure the hub is positioned centrally relative to all the different Lorex devices. Option B - Wireless Connection: Choose the wireless connection, select your Wi-Fi network from the list, then enter the Wi-Fi password of your network to connect. The Lorex Home Hub can be placed wherever there is a good connection to your home router and positioned centrally relative to all the different Lorex devices. 8. Create a secure password for your hub. Record your hubs password below:

Hub password:

4. Plug the hubs power adapter into the power port of your hub and into a nearby outlet. 9. Follow the steps in the Lorex Home app to complete the setup. Email:

Account Password:

5. Once the LED indicator on the hub is flashing green, tap + in the app. 6. Scan the QR code on the bottom of the hub. Note: If your mobile device cannot scan the QR code, tap Manually enter Device ID. 5 Installing the Battery To install the battery:

1. Twist the battery cover clockwise to remove it from the camera (See Figure 1). 2. Insert the battery, following the arrow on the clip side of the battery. 3. Carefully align the arrow on the battery cover with the unlock symbol on the camera. Twist the cover counterclockwise to lock (See Figure 2). To charge the battery:

Option A - Charging inside the camera 1. Use the charging adapter and cable to connect to the cameras power port. 2. Plug into a power outlet until the cameras LED indicator is solid green. Option B - Charging battery by itself 1. Remove the battery from the camera. 2. Use the charging adapter and cable to connect to the batterys power port. 3. Plug into a power outlet until the batterys status indicator is solid green (See Figure 3). Figure 1 Figure 2 Power port 6 Placing the Camera Place the camera on any flat surface or mount it to a wall. Do not place the camera near air conditioners and other air outlets. Install the camera at the recommended angle and height to optimize motion detection accuracy. Figure 3 Battery status indicator To optimize motion detection accuracy when:

Mounted on a wall Placed on a shelf Distance Optimal accuracy for objects within 6.5ft to 32ft (2~10m). Distance Optimal accuracy for objects within 0.5-32ft (2~10m). Angle Height Angle the camera around 15-30 down from the level position. Install the camera between 7-10ft

(2~3m) off of the ground. Angle Place the camera on a flat surface. Make sure the flat surface/shelf is not obstructing the cameras field of view. Height Place the camera between 4.5ft to 6.5ft (1.5~2m) off of the ground. Note: Accuracy of person detection will be influenced by multiple factors, such as the persons distance from the camera, the height of the person, and the height and angle of the camera. Night vision will also impact the accuracy and distance of detection. Optimize motion detection accuracy:

7 Installing the Camera Camera Screws Mounting Bracket To install the camera:

Mounting surface 1. Stick the mounting template to the mounting surface or hold it up to mark the holes. Anchors

(Optional) Optional: Drill holes for the anchors if installing on concrete, stucco, brick, or any other masonry surface. Use a 7/32 or 15/64 drill bit (5.5 - 6mm). 2. Align the mounting plate to the mounting surface and use a Philips head screwdriver to secure the screws. Note: Be sure to follow the UP/TOP directions on the mounting template and mounting plate. 3. Align and push in the UP side of the mounting bracket to the UP side of the mounting plate. Mounting plate Mounting template 4. Slide the mounting bracket down into place. A click sound will indicate that the bracket is locked into the mounting plate. 5. Screw the camera onto the bracket and adjust the cameras angle as needed. 8 Camera Live View For a complete overview of controls available on the Lorex Home app, scan the QR code below using your mobile devices camera. Back Pause/

restart Video quality SD/HD Snapshot 2-Way talk Siren 9 Troubleshooting 1. How to charge the battery. 2. See section 5 Installing the Battery for more details. The camera runs out of battery too fast. Check to see if the camera is frequently set off by motion. If so, enable Person Detection and decrease the motion and person detection sensitivity. Change the performance mode of the camera to Power Saving Mode. If the camera is being used in a high traffic area use an optional power adapter, consider obtaining the solar panel accessory, or adjust the angle of the camera to avoid busy areas like roads or sidewalks. Check to see if the wireless connection between the camera and the Lorex Home Hub is strong. The weaker the signal, the higher the power consumption. Make sure the camera is not placed near an air conditioner or an air vent. Cold temperatures affect the batterys capacity to work. If your camera is outside in cold temperatures, then the battery life might be shorter. 3. The camera is offline. Check to see if the battery has run out of power. Remove the battery and plug it into the charging adapter and cable to check the batterys status indicator. A solid red status indicator means the battery is nearly empty or empty. Check to see if the Lorex Home Hub is offline. See section 3 Status Indicator for more details. Shared users Settings Date & time Camera name Fullscreen view Audio Recording Warning light Privacy mode 4. 5. See section 3 Status Indicator for more details. The Lorex Home Hub is offline. Check that the power adapter is securely connected. Make sure the ethernet cable is properly connected to the Lorex Home Hub and your router (wired connection only). Try to connect to the Internet from another device that is connected directly to your router to make sure you are getting service. Power cycle the Lorex Home Hub. Reset the Lorex Home Hub if necessary. This will not affect recordings stored on the device. Failed to pair the camera to the Lorex Home Hub. Ensure that both the Lorex Home Hub and camera are in pairing mode. Refer to section 3 Status Indicator. The distance between the camera and the Lorex Home Hub is too far. Make sure the camera is no more than 3ft from the hub during the set up process. Make sure you are only pairing one camera to the Lorex Home Hub at a time. Reset the camera. Press and hold down on the reset button until you hear the chime then try pairing again. Make sure that the Lorex Home Hub has been added to the app before pairing. 6. The camera is not picking up motion detection and has a strong reflection when recording through glass. The cameras motion sensor will not work when recording through glass or any other building material. The camera needs to be located outside when trying to monitor motion outdoors. 7. How to reset the camera to factory settings. Press and hold down on the reset button until you hear the chime. Camera safety precautions:

Read this guide carefully and keep it for future reference. Use the camera within given temperature, humidity and voltage levels noted in the cameras Follow all instructions for safe use and handling of the product. specifications. Do not disassemble the camera. Do not point the camera directly at the sun or a source of intense light. Periodic cleaning may be required. Use a damp cloth only. Do not use any harsh, chemical-based cleaners. Battery safety precautions:

Refer to the batterys insert Safety Rules for Lorex Rechargeable Batteries. Disclaimers:

This camera includes an Auto Mechanical IR Cut Filter. When the camera changes between Day/Night viewing modes, an audible clicking noise may be heard from the camera. This clicking is normal, and indicates that the camera filter is working. Audio recording without consent is illegal in certain jurisdictions. Lorex Corporation assumes no liability for use of its products that does not conform with local laws. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Consult the dealer or an experienced radio/TV technician for help. FCC RF Radiation Exposure Statement:

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

1.This device may not cause interference. 2.This device must accept any interference, including interference that may cause undesired operation of the device. 1.Lappareil ne doit pas produire de brouillage;

2.Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

This equipment complies with ISED RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. Pour se conformer aux exigences de conformit CNR 102 RF exposition, une distance de sparation d'au moins 20 cm doit tre maintenue entre l'antenne de cet appareil ettoutes les personnes. Copyright 2020 Lorex Corporation As our products are subject to continuous improvement, Lorex reserves the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE. All rights reserved. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. For up-to-date information and support please visit:

help.lorex.com/series/LHH

FCC Warning Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference and

(2) this device must accept any interference received, including interference that may cause undesired operation. QR Fcc code warning Label location Model No.: U471AA Power Requirement: 5V === 2A LOREX Wireless Frequency: 2.4GHz5GHz FCC ID: UCZ-U471AA-Z IC: 8575A-U471AAZ FC LOREX TECHNOLOGY INC. www.lorex.com miageme Manufactured in China LOC Serial No. 00:1F:54:49:67:D6 Device ID:

UIQ TANTOOTU KOT AQUI UU ATA XXKXHXKKKAKKK ND012006028875

Lorex Technology Inc. Date: 2020-08-17 Communications Commission Federal 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern:

I, the undersigned, hereby authorize manners relating behalf shall have the same relating to application for equipment to these matters. Any and all acts carried effect as acts of our own. UL-CCIC Company Limited to act on our behalf in all authorizatio n, includin g signing of all documents out by UL-CCIC Company Limited on our I, the undersigned, includes FCC benefits, 853(a). hereby certify that we are not subject to a denial of federal benefits, that pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. In authorizing UL-CCIC Co are responsible to:

mpany Limited as our representative, we still recognize that we a) comply with the relevant provisions of the certification program;

b) make all necessary for examining arrangements for the conduct and access documentation provision internal inspection, audit reports) and personnel assessment, surveillance, to all areas, for the purposes reassessment) records

(e.g. of evaluation and resolution of complaints;

(including testing, of the evaluation, including c) make claims certification only in respect of the scope for which certification regarding has been granted;

our product d) do not use Division certification unauthorized;

into disrepute certification and not make any statement in such a manner as to bring the Certification regarding our product which the Certification Division may consider misleading or e) upon suspension that contains matter as required by the Certification thereto Division;

or cancellation of certification, discontinue use of all advertising any reference and return any certification documents f) use certification only to indicate the products are certified as being in conformity with specified standards;

Lorex Technology Inc. 290 Royal Crest Court, Markham, Ontario, L8R 3S1, Canada Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Attention: Application Examiner / Review Engineer Subject: Request to change identification per section 2.933 of FCC rules Date: 2020-08-17 Reference: FCC ID: UCZ-U471AA-Z To The Commission:

This Change of Identification request applies for a new FCC ID: UCZ-U471AA-Z as established in 47CFR 2.933(b) for a currently approved device. This application by Lorex Technology Inc. will establish a new FCC ID under (UCZ-U471AA-Z) grantee code for purpose of marketing. The original grant to FCC ID: 2AVYF-IPC-BX6E1 will remain in effect. An authorization letter by Hangzhou Huacheng Network Technology Co., Ltd. is attached. Per 2.933(b) 1. The original identification is FCC ID: 2A VYF-IPC-BX6E1 2. The original grantee date is 08/12/2020(DTS& NII) 3. The equipment is electrically identical. Only the FCC ID number and model name are different. 4. The original test results are applicable and representative of this changed device . 5. Exterior photographs are included in this application. This following files are electronically submitted as attachments:

Cover Letter External Photos FCC ID label format location Sincerely yours, posiongepegy Co. wr oF a t av y 3 oa z x ve Se SHAW cea Name: Niles Kanapathipillai Title: Director of Quality Assurance New applicant name: Lorex Technology Inc. Address: 250 Royal Crest Court, Markham, Ontario, L3R 3S1, Canada Tel: (905 ) 946-8589 Ext:125 E-mail: Niles.Kanapathipillai@lorextechnology.com

Change In ID Authorization Letter Date: August 17, 2020 . Re: Change of Identification Authorization, FCC ID: 2AVYF-IPC-BX6E1 To Whom It May Concern:

This letter grants authorization for representative of Lorex Technology Inc. to apply to FCC for a change in identification as specified under 47CFR2.933 of the FCC rules. This authorization applies to Hangzhou Huacheng Network Technology Co., Ltd. FCC ID: 2AVYF-IPC-BX6E1. We are aware that Lorex Technology Inc. intends to market the above referenced product under their own FCC ID: UCZ-U471AA-Z Sincerely yours, Company Name: Hangzhou Huacheng Network Technology Co., Ltd. Contact Name: Jian Li Title of Person : Certification Manager Address: No.2930, Nanhuan Road, Binjiang District, Hangzhou, China

Lorex Technology Inc. Address: 250 Royal Crest Court, Markham, Ontario, L3R 3S1, Canada Confirmation Letter We, Lorex Technology Inc., The product: 1440p QHD Smart Deterrence Battery Camera, And model No.: U471AA has the same technical construction including circuit diagram, PCB Layout, components and component layout, all electrical construction and mechanical construction with U471AA-Z.The difference lies only the model number. Sincerely yours, Name: Niles Kanapathipillai Title: Director of Quality Assurance New applicant name: Lorex Technology Inc. Address: 250 Royal Crest Court, Markham, Ontario, L3R 3S1, Canada Tel: 905946-8589 Ext:125 E-mail: Niles.Kanapathipillai@lorextechnology.com