SWEET PEEP MAX VIDEO BABY MONITOR USERS GUIDE Version 1.0 E N G L I S H F R A N A S I E S P A O L www.lorexbaby.com Safety Precautions Adult assembly is required. Keep small parts away from children when assembling. This product is not a toy. Do not allow children or infants to play with it. This video monitor is not a substitute for responsible adult supervision. Test the video monitor before use. Become familiar with its functions. Keep the cords out of reach from children and infants. Never use extension cords with power adapters. Only use the chargers and power adapters provided. Do not use other chargers or power adapters as this may damage the device and battery pack. Only insert batteries/battery pack of the same type. Insert batteries with the correct polarity. Do not mix new and used batteries. Do not mix alkaline, standard, and rechargeable batteries. Remove exhausted batteries from the product. Keep all batteries away from children and infants. Dispose or recycle batteries in accordance with local laws, which may vary by location. If you do not plan to use the unit for a prolonged period of time, remove the battery or ensure you charge it at least once every 6 months. Do not cover the video monitor with a towel or blanket. Do not use the video monitor near water. Do not install the video monitor near a heat source. Do not touch the plug contacts with sharp or metal objects. Keep this users guide for future reference. To Avoid Injury to Children & Infants:
MAKE SURE to keep the camera and all power cords are least 3ft / 1m away from cribs and out of reach of your child. Use the included cable clips to help keep power cords away from your child.
/ 1 m 3 f t V 6 C D Table of Contents:
Product Includes ..............................2 Monitor Overview ...........................3 Camera Overview ...........................4 Getting Started ...............................5 Optional - Camera Batteries ..................... 7 Optional - Wall Mounting the Camera ....... 8 Using Your Baby Monitor ................9 Using the Menus ..................................... 9 Talking to Your Baby .............................. 10 Changing Channels ............................... 10 Using Scan Mode (multiple cameras only) ...... 10 Adjusting Volume .................................. 12 Adjusting Screen Brightness .................... 12 Using Digital Zoom................................ 13 Turning on the Night-Light ....................... 14 Playing Lullabies ................................... 14 Temperature Alerts ................................. 15 Selecting Fahrenheit or Celsius ................ 16 Enabling VOX Mode (Voice Trigger) ........ 17 Video Off Mode (Audio Only Mode) ....... 18 Pairing Additional Cameras ..........19 Technical Specifications .................21 Camera ............................................... 21 Monitor ................................................ 21 Troubleshooting ............................22 Need Help? ...................................22 1 ENGLISH Product Includes x1*
x1*
Camera Power Adapter x2*
x2*
x2*
Screws & Anchors Cable Clips x1 x1 LINK Monitor Power Adapter x1 Battery
*Contents may vary by model 2 Monitor Overview Link LED Menu Power LED Volume LEDs Power / Video Off LINK 2x Zoom /
Volume Up Play / Stop Lullabies 1x Zoom /
Volume Down Video Display Change /
Pair Camera Microphone Two-way Talk Antenna Battery Compartment Stand Speaker 3 ENGLISH Camera Overview Light Sensor Antenna Microphone AAA Battery Compartment Power Switch Power Port V 6 C D Night-light Nighttime LEDs Lens Power LED Mounting Stand Temperature Sensor Speaker PAIR Pair Button 4 Getting Started 1 Connect the power adapter to the camera. V 6 C D Make sure all power cables are at least 3ft
/ 1m away from the crib and out of reach of your child. Use the included cable clips to help keep power cords away from your child. 2 Slide the power switch to ON. The power LED glows. Power Switch V 6 C D 3 Using a flathead screwdriver (not included), remove the battery compartment cover on the monitor. Unscrew using flathead screwdriver 5 ENGLISH 4 Insert the included battery as shown below. 5 Replace the battery compartment cover and secure with screw. If you do not plan to use the unit for a prolonged period of time, remove the battery or ensure you charge it at least once every 6 months. 6 Connect the power adapter to the monitor. The power LED glows. LINK 7 Press and hold the power button to turn on the monitor. Power Button LINK 6 Tips It is recommended to charge the battery for 6 hours before use. For overnight monitoring, it is recommended to connect the power adapter. When fully charged, the monitor will stay on up to 6 hours in normal mode or 10 hours on Video OFF mode (see page 18). For better reception, flip up the antenna on the monitor and camera. Pull up to extend antenna V 6 C D LINK Optional - Camera Batteries Unscrew the battery compartment under the camera and insert 4x AAA batteries (not included). Replace the battery compartment door and screw. 4x AAA Batteries
(not included) Battery Compartment Screw AAA batteries are not intended for overnight monitoring. The camera can operate for up to 4 hours on battery power. Notes If using batteries, it is recommended to use the power adapter whenever possible to save battery life. The camera power adapter cannot charge rechargeable AAA batteries. 7 ENGLISH Optional - Wall Mounting the Camera Before permanently mounting the camera:
Determine where you will get the best view of your baby. Ensure the power cable is long enough to power the camera. Make sure all power cables are at least 3ft / 1m away from the crib and out of reach of your child. Use the included cable clips to help keep power cords away from your child. Cable Clips 1 2 3 Drill 2 holes in the wall with centers exactly 68mm apart. Tap anchors into holes with a hammer. Insert screws 2/3 of the way. Align the mounting points with the screws and push the camera down. 68mm Mounting points 68mm 8 Using Your Baby Monitor The monitor shows the following icons during use:
Icon Meaning Icon Signal strength 1 Selected channel Scan Scan mode activated Volume muted Digital zoom activated X2 Meaning VOX (Voice Trigger) on Battery full Battery low Battery charging Battery finished charging Move zoom area 70F Current room temperature Song currently playing Talk activated Pairing channel Camera out of range or off (e.g. batteries dead) Using the Menus 1 2 3 LINK LINK LINK 9 Press and hold to open the menu Press repeatedly to browse menu options Press to adjust menu options Press to save changes and exit the menu ENGLISH Talking to Your Baby 1 LINK Press and hold to talk to the currently selected camera Audio from the camera is muted while using this feature. Changing Channels 1 LINK C1 Press to cycle through connected cameras or select Scan mode. The currently selected camera is shown on screen. The monitor only plays sound from the camera that is currently being viewed. Using Scan Mode (multiple cameras only) When two or more cameras are connected, you may use Scan mode to cycle through video from each camera. Each camera channel is displayed for 10 seconds. To enable Scan mode:
1 LINK Scan Press repeatedly until Scan is shown on screen 10 When Scan mode is activated, the monitor changes channel automatically every few seconds. A Scan icon appears next to the currently selected channel number. Currently selected channel Scan mode activated LINK 1 Scan To connect additional cameras to the monitor, see Pairing Additional Cameras on page 19. If you wish to only monitor some of your cameras using Scan mode, you may choose to hide certain channels. Hidden channels will not be shown in Scan mode. To show / hide channels in Scan mode:
1 LINK C1 Press to cycle through connected cameras to the channel you wish to show or hide. By default, each channel name has a checkmark beside it, which means it is enabled for monitoring and included in the viewing cycle on Scan mode. 2 LINK C1 Press to change a checkmark and an X An X will disable video from the channel and remove it from the viewing cycle in Scan mode. 11 ENGLISH Adjusting Volume 1 LINK Press to adjust the volume of the monitor Adjusting Screen Brightness 1 2 3 LINK LINK LINK Press and hold to open the menu Press repeatedly until shown is Press to adjust the brightness 4 Press to save changes and exit menu. 12 Using Digital Zoom 1 LINK Press to adjust the volume of the monitor x2 Press and hold to zoom in 2 While zoomed in, press appear on the monitor. Four arrows LINK Press and hold to open the Press repeatedly is Press to adjust the brightness to save changes and exit menu. 3 Use the arrow keys to move the zoom area. Before you can return to normal viewing mode, you must press to disable the on-screen arrows. 4 LINK x1 Press and hold to zoom out 13 ENGLISH Turning on the Night-Light 1 2 3 LINK LINK LINK OFF ON Press and hold to open the menu Press repeatedly until shown is Press to turn the night-light on / off 4 Press to save changes and exit menu. Playing Lullabies The camera can play 5 different pre-loaded songs. 1 2 LINK LINK 14 Press to play the first lullaby Press to select a different lullaby Press and hold to open the Press repeatedly is Press to turn the night-light to save changes and exit menu. Press to play the first lullaby Press to select a different lullaby 3 LINK Press to stop playing lullabies If a lullaby is playing, it will stop when the talk feature is used. Temperature Alerts The temperature alert feature allows you to ensure the babys room is at a comfortable, safe temperature. The monitor beeps if the temperature gets too hot or cold. Temperature sensor is accurate within 3F/1C. You can control the high and low temperatures that trigger alerts or disable temperature alerts. To setup temperature alerts:
1 2 LINK LINK Press and hold to open the menu Lo 68 F Press repeatedly until Lo is shown 3 Press temperature. to adjust the low If the temperature at the selected camera goes below this temperature, the monitor will beep and the temperature reading on the monitor will flash orange. If you select a temperature below 62F /
17C, the low temperature alert will be turned OFF. 15 ENGLISH 4 LINK Hi 82 F Press repeatedly until Hi is shown 5 Press temperature. to adjust the high If the temperature at the selected camera goes above this temperature, the monitor will beep and the temperature reading on the monitor will flash orange. If you select a temperature above 86F /
30C, the high temperature alert will be turned OFF. 6 Press to save changes and exit menu. Selecting Fahrenheit or Celsius You can select if you would like temperature readings and alerts to be in Fahrenheit or Celsius. 1 2 LINK LINK F Press and hold to open the menu Press repeatedly until shown is 3 Press C (Celsius) to select F (Fahrenheit) or 4 Press to save changes and exit menu. 16 Press repeatedly until Hi is Enabling VOX Mode (Voice Trigger) In VOX mode, the monitors screen and speaker will turn off after a minute unless sound is detected at the selected sensitivity level. This conserves battery power, and alerts you only when needed. to save changes and exit menu. Press and hold to open the Press repeatedly 1 2 3 LINK LINK LINK Press and hold to open the menu Press repeatedly until is shown Press to set VOX sensitivity VOX mode is off VOX mode is on VOX OFF VOX Low sensitivity High Sensitivity Medium Sensitivity If you want softer noises to trigger the monitor (such as a faint whimper), set the sensitivity setting higher. If you only want louder noises to trigger the monitor (such as a loud cry), set the sensitivity setting lower. VOX mode will not work while Scan mode is activated. 4 Press to exit menu. While VOX is activated, the monitors screen and speaker will turn off after a minute unless sound is detected at the selected sensitivity level. Press any button to turn the screen back on. When VOX is on, a VOX icon is shown on the screen. 17 ENGLISH Video Off Mode (Audio Only Mode) 1 LINK Press to enter Video Off mode The monitors video display is turned off. The monitor plays sound from the selected channel only. Notes If Scan mode is enabled, the monitor will play sound from the channel that is currently selected. VOX mode will override Video Off mode. See Enabling VOX Mode (Voice Trigger) on page 17 for details. 2 Press any button to turn the video display back on. 18 Press to enter Video Off Pairing Additional Cameras The camera(s) included have already been paired with the monitor. If you have purchased additional add-on cameras (model#
LB2251AC1), OR if your monitor and camera are not paired up, follow the steps below. To pair a camera with the monitor:
1 Place the camera and monitor next to each other. Make sure the camera is turned on. 2 3 LINK C1 Press and hold until is shown on the monitor. LINK C2 Press to to select the channel you would like to pair the camera to If a camera is already connected to this channel, the new camera will replace the existing camera. 4 LINK Press to confirm the pairing channel. The Link LED will begin flashing 19 ENGLISH 5 Press the PAIR button on the back of the camera. PAIR PAIR button Video from the camera is immediately shown on the monitor once the camera is successfully paired. If your monitor reads Out of Range, then pairing was not successful. Complete the pairing process again. Notes Immediately move the camera away from the monitor to avoid speaker feedback. The monitor can connect up to 4 cameras. 3.4in 87mm 20 Technical Specifications Camera Frequency Maximum Range Up to 450ft / 138m outdoors*
2.4GHz Image Sensor Lens IR LED Power Adapter Battery Battery Life Weight Monitor Frequency Display Power Adapter Battery Battery Life Weight Up to 150ft / 46m indoors*
1/5 Color CMOS 3.0mm F2.5 6 pcs 6.0V DC 800mA Supports 4x AAA Batteries
(not included) Up to 4 hours on AAA batteries 0.3lbs / 0.1kg 2.4GHz 4.3 TFT Color LCD 6.0V DC 800mA Li-ion Rechargeable Battery 3.7V DC 1700mAh Up to 6 hours in normal mode Up to 10 hours in Video Off 0.5lbs / 0.2kg
*Based on unobstructed line of sight. Actual range will vary based on surroundings. 3.4in 87mm 5.3in 135mm 3.8in 97mm V 6 C D 3.4in 87mm 5.8in 148mm LINK 21 1.0in 25mm D C 6 V ENGLISH Troubleshooting Problem No video displayed on the monitor Monitor screen keeps turning off The camera is not detected; Out of Range is shown on the monitor Feedback / squealing noise coming from the monitor Solution Press and hold the button to power on the monitor. Monitor is out of batteries. Plug in the monitor power adapter. Video Off or VOX mode is on. Press any button to turn the screen back on. VOX mode is on. See Enabling VOX Mode (Voice Trigger) on page 17 for details on disabling VOX mode. The monitor battery is low. Plug in the monitor power adapter. Wrong channel selected. Press repeatedly to select the channel. Make sure the camera is powered on. Camera may be out of batteries. Replace the batteries or plug in the camera power adapter. The camera and monitor may be out of range. Extend the antennas on the monitor and camera or move the monitor and camera closer together. You may need to pair the camera and the monitor again. See Pairing Additional Cameras on page 19 for details. Your camera and monitor may be too close to each other. Move them further apart. For optimal performance, avoid placing the monitor and camera near televisions, computers, cordless/mobile phones, or other electrical equipment. Press to lower the monitor volume. Need Help?
Product Support is available 24/7 including product information, user guides, quick start guides, and FAQs at www.lorexbaby.com/support 22 CLEANING Clean the monitor and camera with a slightly damp cloth or an anti-
static cloth. Never use cleaning agents or abrasive solvents. Do not clean any part of the product with cleaners with thinners or other solvents and chemicals. This may cause permanent damage to the product, which is not covered by the Warranty. When necessary, clean it with a damp cloth. Keep your camera and monitor away from hot, humid areas or strong sunlight, and do not get it wet. Every effort has been made to ensure high standards of reliability for your baby monitor. However, if something does go wrong, please do not try to repair it yourself. Contact Customer Service for assistance. DISPOSAL OF THE DEVICE At the end of the product life cycle, you should not dispose of this product with normal household waste, but take the product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, users guide, and/or box indicates this. Some of the product materials can be re-used if you take them to a recycling point. By reusing some parts or raw materials from used products you make an important contribution to the protection of the environment. Please contact your local authorities in case you need more information on the collection points in your area. Dispose of the battery pack in an environmentally-friendly manner according to your local regulations. NOTICES WARNING: Any changes or modifications not expressly approved by the grantee of this device could void the users authority to operate the device. FCC NOTICE This device complies with Part 15, subpart C, of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. However, it is imperative that the user follows the guidelines in this manual to avoid improper usage which may result in damage to the unit, electrical shock and fire hazard injury. CAUTION: To maintain compliance with the FCCs RF exposure guidelines, place the camera at least 20cm (7.87in) from nearby persons. For monitor, our device has been tested and it confirms to the SAR limit value. This device was tested for typical body-worn operations kept 0 cm from the body. CANADA/IC NOTICE This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. 23 Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante.